We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
Summary: The Sparc V9 membar instruction can enforce different types of
memory orderings depending on the value in its immediate field. In the
architectural manual the type is selected by combining different assembler
tags into a mask. This patch adds support for these tags.
Reviewers: jyknight, venkatra, brad
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D53491
llvm-svn: 349048
Summary: Use 0 as the default immediate for the UNIMP instruction.
This matches the behavior in gas.
Reviewers: jyknight, venkatra
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D51526
llvm-svn: 343203
Summary:
Partial write %PSR (WRPSR) is a SPARC V8e option that allows WRPSR
instructions to only affect the %PSR.ET field. It is supported by
the GR740 and GR716.
Reviewers: jyknight, venkatra
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48644
llvm-svn: 343202
Summary: If an object file ends with a relocation that is smaller
than 4 bytes we will write outside the Data array and trigger an
"Invalid index" assertion.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D50971
llvm-svn: 340736
Summary: When compiling with -fpic, in contrast to -fPIC, use only the
immediate field to index into the GOT. This saves space if the GOT is
known to be small. The linker will warn if the GOT is too large for
this method.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: brad, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D47136
llvm-svn: 334383
Summary:
"Unknown" for platforms that were not manually added into the switch
did not make sense at all. Now it prints Target + addend for all
elf-machines that were not explicitly mentioned.
Addresses PR21059 and PR25124.
Original author: fedor.sergeev
Reviewers: jyknight, espindola, fedor.sergeev
Reviewed By: jyknight
Subscribers: eraman, dcederman, jfb, dschuff, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D36464
llvm-svn: 333726
Summary:
Adding these makes it easier to assemble the output from GCC which
generates a lot of .uahalf and .uaword directives.
GAS treats .uahalf and .half the same unless the --enforce-aligned-data
flag is used. I could not find a similar flag for LLVM so it seems that
.half does not have any alignment requirement and is treated the same as
.uahalf should be. If that would change later on then the tests in
sparc-directives.s would fail due to bad alignment.
Reviewers: jyknight, asb
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D47319
llvm-svn: 333372
Summary:
Some SPARC TLS relocations were applying nontrivial adjustments
to zero value, leading to unexpected non-zero values in ELF and then
Solaris linker failures.
Getting rid of these adjustments.
Fixes PR33825.
Reviewers: rafael, asb, jyknight
Subscribers: joerg, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D35567
llvm-svn: 308978
MC only needs to know if the output is PIC or not. It never has to
decide about creating GOTs and PLTs for example. The only thing that
MC itself uses this information for is expanding "macros" in sparc and
mips. The rest I am pretty sure could be moved to CodeGen.
This is a cleanup and isolates the code from future changes to
Reloc::Model.
llvm-svn: 269909
This change adds SMAC (signed multiply-accumulate) and UMAC (unsigned multiply-accumulate) for LEON subtargets of the Sparc processor.
The new files LeonFeatures.td and leon-instructions.ll will both be expanded in future, so I want to leave them separate as small files for this review, to be expanded in future check-ins.
Note: The functions are provided only for inline-assembly provision. No DAG selection is provided.
Differential Revision: http://reviews.llvm.org/D19911
llvm-svn: 268908
This will allow inline assembler code to utilize these features, but no automatic lowering is provided, except for the previously provided @llvm.trap, which lowers to "ta 5".
The change also separates out the different assembly language syntaxes for V8 and V9 Sparc. Previously, only V9 Sparc assembly syntax was provided.
The change also corrects the selection order of trap disassembly, allowing, e.g. "ta %g0 + 15" to be rendered, more readably, as "ta 15", ignoring the %g0 register. This is per the sparc v8 and v9 manuals.
Check-in includes many extra unit tests to check this works correctly on both V8 and V9 Sparc processors.
Code Reviewed at http://reviews.llvm.org/D17960.
llvm-svn: 263044
Previous check-in message was:
The patch adds missing registers and instructions to complete all the registers supported by the Sparc v8 manual.
These are all co-processor registers, with the exception of the floating-point deferred-trap queue register.
Although these will not be lowered automatically by any instructions, it allows the use of co-processor
instructions implemented by inline-assembly.
Code Reviewed at http://reviews.llvm.org/D17133, with the exception of a very small change in brace placement in SparcInstrInfo.td,
which was formerly causing a problem in the disassembly of the %fq register.
llvm-svn: 262135
These are all co-processor registers, with the exception of the floating-point deferred-trap queue register.
Although these will not be lowered automatically by any instructions, it allows the use of co-processor
instructions implemented by inline-assembly.
Code Reviewed at http://reviews.llvm.org/D17133, with the exception of a very small change in brace placement in SparcInstrInfo.td,
which was formerly causing a problem in the disassembly of the %fq register.
llvm-svn: 262133
The encodings for floating point conditions A(lways) and N(ever) were
incorrectly specified for the assembly parser, per Sparc manual v8 page
121. This change corrects that mistake.
Also, strangely, all of the branch instructions already had MC test
cases, except for the broken ones. Added the tests.
Patch by Chris Dewhurst
Differential Revision: http://reviews.llvm.org/D17074
llvm-svn: 260390
To properly handle this, define the *a instructions as separate
instruction classes by refactoring the LoadA and StoreA multiclasses.
Move the instruction tests into the sparcv9 file to test the difference.
llvm-svn: 245360
The LDD/STD instructions can load/store a 64bit quantity from/to
memory to/from a consecutive even/odd pair of (32-bit) registers. They
are part of SparcV8, and also present in SparcV9. (Although deprecated
there, as you can store 64bits in one register).
As recommended on llvmdev in the thread "How to enable use of 64bit
load/store for 32bit architecture" from Apr 2015, I've modeled the
64-bit load/store operations as working on a v2i32 type, rather than
making i64 a legal type, but with few legal operations. The latter
does not (currently) work, as there is much code in llvm which assumes
that if i64 is legal, operations like "add" will actually work on it.
The same assumption does not hold for v2i32 -- for vector types, it is
workable to support only load/store, and expand everything else.
This patch:
- Adds a new register class, IntPair, for even/odd pairs of registers.
- Modifies the list of reserved registers, the stack spilling code,
and register copying code to support the IntPair register class.
- Adds support in AsmParser. (note that in asm text, you write the
name of the first register of the pair only. So the parser has to
morph the single register into the equivalent paired register).
- Adds the new instructions themselves (LDD/STD/LDDA/STDA).
- Hooks up the instructions and registers as a vector type v2i32. Adds
custom legalizer to transform i64 load/stores into v2i32 load/stores
and bitcasts, so that the new instructions can actually be
generated, and marks all operations other than load/store on v2i32
as needing to be expanded.
- Copies the unfortunate SelectInlineAsm hack from ARMISelDAGToDAG.
This hack undoes the transformation of i64 operands into two
arbitrarily-allocated separate i32 registers in
SelectionDAGBuilder. and instead passes them in a single
IntPair. (Arbitrarily allocated registers are not useful, asm code
expects to be receiving a pair, which can be passed to ldd/std.)
Also adds a bunch of test cases covering all the bugs I've added along
the way.
Differential Revision: http://reviews.llvm.org/D8713
llvm-svn: 244484
These are mostly from the chart in the SparcV8 spec, section "A.3
Synthetic Instructions".
Differential Revision: http://reviews.llvm.org/D9834
llvm-svn: 241461
This causes errors like:
ld: error: blah.o: requires dynamic R_X86_64_PC32 reloc against '' which
may overflow at runtime; recompile with -fPIC
blah.cc:function f(): error: undefined reference to ''
blah.o:g(): error: undefined reference to ''
I have not yet come up with an appropriate reproduction.
llvm-svn: 240394
Now that pr23900 is fixed, we can bring it back with no changes.
Original message:
Make all temporary symbols unnamed.
What this does is make all symbols that would otherwise start with a .L
(or L on MachO) unnamed.
Some of these symbols still show up in the symbol table, but we can just
make them unnamed.
In order to make sure we produce identical results when going thought assembly,
all .L (not just the compiler produced ones), are now unnamed.
Running llc on llvm-as.opt.bc, the peak memory usage goes from 208.24MB to
205.57MB.
llvm-svn: 240302
What this does is make all symbols that would otherwise start with a .L
(or L on MachO) unnamed.
Some of these symbols still show up in the symbol table, but we can just
make them unnamed.
In order to make sure we produce identical results when going thought assembly,
all .L (not just the compiler produced ones), are now unnamed.
Running llc on llvm-as.opt.bc, the peak memory usage goes from 208.24MB to
205.57MB.
llvm-svn: 240130
They had been getting emitted as a section + offset reference, which
is bogus since the value needs to be the offset within the GOT, not
the actual address of the symbol's object.
Differential Revision: http://reviews.llvm.org/D10441
llvm-svn: 240020
Summary:
GetTarget() may modify TripleName without also updating TheTriple.
This can lead to situations where the MCObjectStreamer has a different triple
to the rest of LLVM.
This inconsistency caused sparc-little-endian.s to pass on Windows because most
of LLVM had sparcel-pc-win32 while MCObjectStreamer had "". I believe the same
kind of thing was also true of Darwin.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin, rafael
Differential Revision: http://reviews.llvm.org/D10450
llvm-svn: 239808
Fangrui Song