Summary:
I recently re-discovered that the unsinged stream operators of the
lldb_private::Stream class have a surprising behavior in that they print
the number in hex. This is all the more confusing because the "signed"
versions of those operators behave normally.
Now that, thanks to Raphael, each Stream class has a llvm::raw_ostream
wrapper, I think we should delete most of our formatting capabilities
and just delegate to that. This patch tests the water by just deleting
the operators with the most surprising behavior.
Most of the code using these operators was printing user_id_t values. It
wasn't fully consistent about prefixing them with "0x", but I've tried
to consistenly print it without that prefix, to make it more obviously
different from pointer values.
Reviewers: teemperor, JDevlieghere, jdoerfert
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70241
This way it looks more like the code around it. The assert is also gone as it just
checks that the variables we declare directly above were not initialized by anyone.
That made more sense when this was one large function.
Part of the work to split up this monolithic parsing function.
Should be NFC but due to the kafkaesque control flow in this case statement this might
have some unintended side effects.
Fix handling concurrent watchpoint events so that they are reported
correctly in LLDB.
If multiple watchpoints are hit concurrently, the NetBSD kernel reports
them as series of SIGTRAPs with a thread specified, and the debugger
investigates DR6 in order to establish which watchpoint was hit. This
is normally fine.
However, LLDB disables and reenables the watchpoint on all threads after
each hit, which results in the hit status from DR6 being wiped.
As a result, it can't establish which watchpoint was hit in successive
SIGTRAP processing.
In order to workaround this problem, clear DR6 only if the breakpoint
is overwritten with a new one. More specifically, move cleaning DR6
from ClearHardwareWatchpoint() to SetHardwareWatchpointWithIndex(),
and do that only if the newly requested watchpoint is different
from the one being set previously. This ensures that the disable-enable
logic of LLDB does not clear watchpoint hit status for the remaining
threads.
This also involves refactoring of watchpoint logic. With the old logic,
clearing watchpoint involved wiping dr6 & dr7, and setting it setting
dr{0..3} & dr7. With the new logic, only enable bit is cleared
from dr7, and the remaining bits are cleared/overwritten while setting
new watchpoint.
Differential Revision: https://reviews.llvm.org/D70025
NetBSD ptrace interface does not populate watchpoints to newly-created
threads. Solve this via copying the watchpoints from the current thread
when new thread is reported via TRAP_LWP.
Add a test that verifies that when the user does not have permissions
to set watchpoints on NetBSD, the 'watchpoint set' errors out gracefully
and thread monitoring does not crash on being unable to copy watchpoints
to new threads.
Differential Revision: https://reviews.llvm.org/D70023
Implement major improvements to multithreaded program support. Notably,
support tracking new and exited threads, associate signals and events
with correct threads and support controlling individual threads when
resuming.
Firstly, use PT_SET_EVENT_MASK to enable reporting of created and exited
threads via SIGTRAP. Handle TRAP_LWP events to keep track
of the currently running threads.
Secondly, update the signal (both generic and SIGTRAP) handling code
to account for per-thread signals correctly. Signals delivered
to the whole process are reported on all threads, while per-thread
signals and events are reported only to the specific thread.
The remaining threads are marked as 'stopped with no reason'. Note that
NetBSD always stops all threads on debugger events.
Thirdly, implement the ability to set every thread as running, stopped
or single-stepping separately while continuing the process. This also
provides the ability to send a signal to the whole process or to one
of its thread while resuming.
Differential Revision: https://reviews.llvm.org/D70022
Summary:
Adds support for doing range-based for-loops on LLDB's VariableList and
modernises all the index-based for-loops in LLDB where possible.
Reviewers: labath, jdoerfert
Reviewed By: labath
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70668
Summary:
LLDB's ASTDumper is just a clone of Clang's ASTDumper but with some scary code and
some unrelated functionality (like dumping name/attributes of types). This removes LLDB's ASTDumper
and replaces its uses with the `ClangUtils::DumpDecl` method that just calls Clang's ASTDumper
and returns the result as a string.
The few uses where we just want a textual representation of a type (which will print their name/attributes but not
dump any AST) are now also in ClangUtil under a `ToString` name until we find a better home for them.
Reviewers: labath
Reviewed By: labath
Subscribers: mgorny, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70663
Summary:
The test used a non-stopping "run" command to launch the process. This
is different from the regular launch with no extra launch commands,
which uses eLaunchFlagStopAtEntry to ensure that the process stops
straight away.
I'm not really sure what's supposed to happen in non-stop-at-entry mode,
or if that's even supported, but what ended up happening was the launch
packet got a reply while the process was running. Then the test case did
a continue_to_next_stop(), which queued a *second* resume request
(along with the internal "resumes" which were being issued as a part of
normal process startup). These two resumes ended up chasing each other's
tails inside lldb in a way which produced hilarious log traces.
Surprisingly, the test ended up passing most of the time, but it did
cause spurious failures when the test seemed to miss a breakpoint.
This changes the test to use stop-at-entry mode in the manual launch
sequence too, which seems to be enough to make the test pass reliably.
Reviewers: clayborg, kusmour, jankratochvil
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70127
The in_call_stack Python script makes it possible to modify the last
breakpoint to only stop if a given function is present in the call
stack. It will check both the symbol name and the function name (coming
from the debug info, in case the binary is stripped).
To use this, you have to:
1. Import the script into lldb.
(lldb) command script import in_call_stack.py
2. Set a breakpoint and use the in_call_stack alias.
(lldb) b foo
(lldb) in_call_stack bar
Note that this alias operates on the last set breakpoint. You can re-run
the in_call_stack command to modify the condition.
Split CallEdge into DirectCallEdge and IndirectCallEdge. Teach
DWARFExpression how to evaluate entry values in cases where the current
activation was created by an indirect call.
rdar://57094085
Differential Revision: https://reviews.llvm.org/D70100
This affects -gmodules only.
Under normal operation pcm_type is a shallow forward declaration
that gets completed later. This is necessary to support cyclic
data structures. If, however, pcm_type is already complete (for
example, because it was loaded for a different target before),
the definition needs to be imported right away, too.
Type::ResolveClangType() effectively ignores the ResolveState
inside type_sp and only looks at IsDefined(), so it never calls
ClangASTImporter::ASTImporterDelegate::ImportDefinitionTo(),
which does extra work for Objective-C classes. This would result
in only the forward declaration to be visible.
An alternative implementation would be to sink this into Type::ResolveClangType ( 88235812a7/lldb/source/Symbol/Type.cpp (L5809)) though it isn't clear to me how to best do this from a layering perspective.
rdar://problem/52134074
Differential Revision: https://reviews.llvm.org/D70415
This is a correctness fix for the Clang DWARF parser that primarily
matters for swift-lldb's ability to import Clang types that were
reconstructed from DWARF into Swift.
rdar://problem/55025799
Differential Revision: https://reviews.llvm.org/D70580
Summary: Ensure that breakpoint ivar is properly set in exception breakpoint resolver so that exception breakpoints set on dummy targets are resolved once real targets are created and run.
Reviewers: jingham
Reviewed By: jingham
Subscribers: teemperor, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D69880
Improve the message printed when LLDB crashes by asking the user to
replay the reproducer before attaching it to a bugreport..
********************
Crash reproducer for lldb version 10.0.0 (git@github.com:llvm/llvm-project.git revision ...)
clang revision ...
llvm revision ...
Reproducer written to '/path/to/reproducer'
Before attaching the reproducer to a bug report:
- Look at the directory to ensure you're willing to share its content.
- Make sure the reproducer works by replaying the reproducer.
Replay the reproducer with the following command:
./bin/lldb -replay /path/to/reproducer
********************
This patch replaces the existing out-of-date man page for lldb and
replaces it with an RST file from which sphinx generates the actual
troff file. This is similar to how man pages are generated for the rest
of the LLVM utilities.
The man page is generated by building the `docs-lldb-man` target.
Differential revision: https://reviews.llvm.org/D70514
Made small improvements while debugging through
CommandObjectTarget::AddModuleSymbols.
1. Refactored error case for an early out, reducing the indentation of
the rest of this long function.
2. Clarified some comments by correcting spelling and punctuation.
3. Reduced duplicate code at the end of the function.
Tested with `ninja check-lldb`
Differential Review: https://reviews.llvm.org/D70458
lldb would silently accept a response to the 'g' packet
(read all registers) which was too large; this handles the
case where it is too small.
Differential Revision: https://reviews.llvm.org/D70417
<rdar://problem/34916465>
This patch hooks the reproducer infrastructure with the signal handlers.
When lldb crashes with reproducers capture enabled, it will now generate
the reproducer and print a short message the standard out. This doesn't
affect the pretty stack traces, which are still printed before.
This patch also introduces a new reproducer sub-command that
intentionally raises a given signal to test the reproducer signal
handling.
Currently the signal handler is doing too much work. Instead of copying
over files into the reproducers in the signal handler, we should
re-invoke ourselves with a special command line flag that looks at the
VFS mapping and performs the copy.
This is a NO-OP when reproducers are disabled.
Differential revision: https://reviews.llvm.org/D70474
Remove hardcoded string prefix length assumption causing issues when
concatenating summary for NSURL in NSURLSummaryProvider. Provider relies
on concatenation of NSStringProvider results for summary, and while the
strings are prefixed with '@' in Objective-C, that is not the case in
Swift causing part of the description to be truncated.
This will be tested in the downstream fork.
Patch by Martin Svensson!
Use TARGET_TRIPLE instead of LLVM_DEFAULT_TARGET_TRIPLE, as the latter
isn't exported by LLVMConfig.cmake, which means arch detection fails if
lldb is built separately from llvm.
Searching persistent decls is a small subset of the things
FindExternalVisibleDecls does. It should be its own function instead
of being encapsulated in this `do { } while(false);` pattern.
This overload is only used in one place and having static overloads for
all methods that only do an additional clang::ASTContext -> ClangASTContext
conversion is just not sustainable.
It turns out that the ExprMutationAnalyzer can be very slow when AST
gets huge in some cases. The idea is to move this analysis to the LLVM
back-end level (more precisely, in the LiveDebugValues pass). The new
approach will remove the performance regression, simplify the
implementation and give us front-end independent implementation.
Differential Revision: https://reviews.llvm.org/D68206
Summary:
expect() forwards its command to sendline(). This can be problematic if the command already contains a newline: sendline() unconditionally adds a newline to the command, which causes the command to run twice (hitting enter in lldb runs the previous command). The expect() helper looks for the prompt and finds the first one, but because the command has run a second time, the buffer will contain the contents of the second time the command ran, causing potential erroneous matching.
Simplify the editline test, which was using different commands to workaround this misunderstanding.
Reviewers: labath
Reviewed By: labath
Subscribers: merge_guards_bot, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70324
This is an attempt to feature the user-facing resources more
prominently on the LLDB website by calling out the tutorial and the
GDB command map wight on the start page.
I also moved the "Why a new debugger" section to the "Goals"
subpage. Given that LLDB's first release is almost a decade in the
past now, the title is a bit of an anachronism.
Lastly, I moved the Architecture sub-page from "use" to "resources",
since end-users do not care about the source code layout.
Differential Revision: https://reviews.llvm.org/D70449
I just used the mangled names as this test is anyway a Darwin-only ObjC++ test.
We probably should also test this on other platforms but that will be
another commit as we need to untangle the ObjC and C++ parts first.
Summary:
This is some really shady code. It's supposed to kick in after an expression already failed and then try to look
up "unknown types" that for some undocumented reason can't be resolved during/before parsing. Beside the
fact that we never mark any type as `EVUnknownType` in either swift-lldb or lldb (which means this code is unreachable),
this code doesn't even make the expression evaluation succeed if if would ever be executed but instead seems
to try to load more debug info that maybe any following expression evaluations might succeed.
This patch removes ClangExpressionDeclMap::ResolveUnknownTypes and the related data structures/checks/calls.
Reviewers: davide
Reviewed By: davide
Subscribers: aprantl, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70388
These tests are failing with various assertion failures, but they all
throw the following error message first:
error: a.out 0x0000002d: adding range [0x14-0x24) which has a base that
is less than the function's low PC 0x40060c.
See llvm.org/pr44037.
Differential Revision: https://reviews.llvm.org/D70381
We're checking for support but we're discarding the result. My best
guess is that these warnings were disabled in the past. However, I don't
see a reason to keep it that way.
This adds a page about LLDB reproducers. It describes how to use the
reproducers on the command line and lists some of the known
issues/limitations.
Differential revision: https://reviews.llvm.org/D70409
Allow clients of the llvm library to opt-in to one-shot SIGPIPE
handling, instead of forcing them to undo llvm's SIGPIPE handler
registration (which is brittle).
The current behavior is preserved for all llvm-derived tools (except
lldb) by means of a default-`true` flag in the InitLLVM constructor.
This prevents "IO error" crashes in long-lived processes (lldb is the
motivating example) which both a) load llvm as a dynamic library and b)
*really* need to ignore SIGPIPE.
As llvm signal handlers can be installed when calling into libclang
(say, via RemoveFileOnSignal), thereby overriding a previous SIG_IGN for
SIGPIPE, there is no clean way to opt-out of "exit-on-SIGPIPE" in the
current model.
Differential Revision: https://reviews.llvm.org/D70277
Due to alginment and packing using separate members takes up the same
amount of space, but makes it far less cumbersome to deal with it in
constructors etc.
This adds a page named Caveats with a section on some of the things to
be aware of related to Python. It's a question we've seen more than once
pop up and I think it's good to have it documentation on the website.
Even though some of it might be useful to users, I still put it under
"development" because it requires some understanding of how LLDB is
built.
Differential revision: https://reviews.llvm.org/D70252
Implement thread name getting sysctl() on NetBSD. Also fix
the incorrect type in pthread_setname_np() in the relevant test.
Differential Revision: https://reviews.llvm.org/D70363
Summary:
The DAP has a completion request that has been unimplemented. It allows showing autocompletion tokens inside the Debug Console.
I implemented it in a very simple fashion mimicking what the user would see when autocompleting an expression inside the CLI.
There are two cases: normal variables and commands. The latter occurs when a text is prepepended with ` in the Debug Console.
These two cases work well and have tests.
Reviewers: clayborg, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D69873
Builtins are rarely if ever accessed via the Preprocessor. They are
typically found on the ASTContext, so there should be no performance
penalty to using a pointer indirection to store the builtin context.
Three uses of try_lock intentionally ignore the result, as explained in
the comment. Make that explicit with a void cast.
Add what appears to be a missing return in the clang expression parser
code. It's a functional change, but presumably the right one.
Differential Revision: https://reviews.llvm.org/D70281
Summary:
To run the testsuite remotely the executable needs to be uploaded to
the target system. The Target takes care of this by default.
When the test uses additional shared libraries, those won't be handled
by default and need to be registered with the target using
test.registerSharedLibrariesWithTarget(target, dylib).
Calling this API requires a target, so it doesn't mesh well with the
run_to_* helpers that we've been advertising as the right way to write
tests.
This patch adds an extra_images argument to all the helpers and does
the registration automatically when running a remote
testsuite. TestWeakSymbols.py was converted to use this new scheme.
Reviewers: jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70134
This feature is mostly there to aid debugging of Clang module issues,
since the only useful actual the end-user can to is to recompile their
program.
Differential Revision: https://reviews.llvm.org/D70272
Pavel Labath