This is part of a new statistics gathering feature for the sanitizers.
See clang/docs/SanitizerStats.rst for further info and docs.
Differential Revision: http://reviews.llvm.org/D16175
llvm-svn: 257971
In {CG,}ExprConstant.cpp, we weren't treating vector splats properly.
This patch makes us treat splats more properly.
Additionally, this patch adds a new cast kind which allows a bool->int
cast to result in -1 or 0, instead of 1 or 0 (for true and false,
respectively), so we can sanely model OpenCL bool->int casts in the AST.
Differential Revision: http://reviews.llvm.org/D14877
llvm-svn: 257559
Clang-side cross-DSO CFI.
* Adds a command line flag -f[no-]sanitize-cfi-cross-dso.
* Links a runtime library when enabled.
* Emits __cfi_slowpath calls is bitset test fails.
* Emits extra hash-based bitsets for external CFI checks.
* Sets a module flag to enable __cfi_check generation during LTO.
This mode does not yet support diagnostics.
llvm-svn: 255694
This patch changes the generation of CGFunctionInfo to contain
the FunctionProtoType if it is available. This enables the code
generation for call instructions to look into this type for
exception information and therefore generate better quality
IR - it will not create invoke instructions for functions that
are know not to throw.
llvm-svn: 253926
target features that the caller function doesn't provide. This matches
the existing backend failure to inline functions that don't have
matching target features - and diagnoses earlier in the case of
always_inline.
Fix up a few test cases that were, in fact, invalid if you tried
to generate code from the backend with the specified target features
and add a couple of tests to illustrate what's going on.
This should fix PR25246.
llvm-svn: 252834
Previously, __weak was silently accepted and ignored in MRC mode.
That makes this a potentially source-breaking change that we have to
roll out cautiously. Accordingly, for the time being, actual support
for __weak references in MRC is experimental, and the compiler will
reject attempts to actually form such references. The intent is to
eventually enable the feature by default in all non-GC modes.
(It is, of course, incompatible with ObjC GC's interpretation of
__weak.)
If you like, you can enable this feature with
-Xclang -fobjc-weak
but like any -Xclang option, this option may be removed at any point,
e.g. if/when it is eventually enabled by default.
This patch also enables the use of the ARC __unsafe_unretained qualifier
in MRC. Unlike __weak, this is being enabled immediately. Since
variables are essentially __unsafe_unretained by default in MRC,
the only practical uses are (1) communication and (2) changing the
default behavior of by-value block capture.
As an implementation matter, this means that the ObjC ownership
qualifiers may appear in any ObjC language mode, and so this patch
removes a number of checks for getLangOpts().ObjCAutoRefCount
that were guarding the processing of these qualifiers. I don't
expect this to be a significant drain on performance; it may even
be faster to just check for these qualifiers directly on a type
(since it's probably in a register anyway) than to do N dependent
loads to grab the LangOptions.
rdar://9674298
llvm-svn: 251041
Currently debug info for types used in explicit cast only is not emitted. It happened after a patch for better alignment handling. This patch fixes this bug.
Differential Revision: http://reviews.llvm.org/D13582
llvm-svn: 250795
Currently all variables used in OpenMP regions are captured into a record and passed to outlined functions in this record. It may result in some poor performance because of too complex analysis later in optimization passes. Patch makes to emit outlined functions for parallel-based regions with a list of captured variables. It reduces code for 2*n GEPs, stores and loads at least.
Codegen for task-based regions remains unchanged because runtime requires that all captured variables are passed in captured record.
llvm-svn: 247251
This flag causes the compiler to emit bit set entries for functions as well
as runtime bitset checks at indirect call sites. Depends on the new function
bitset mechanism.
Differential Revision: http://reviews.llvm.org/D11857
llvm-svn: 247238
Summary:
Currently clang provides no general way to generate nontemporal loads/stores.
There are some architecture specific builtins for doing so (e.g. in x86), but
there is no way to generate non-temporal store on, e.g. AArch64. This patch adds
generic builtins which are expanded to a simple store with '!nontemporal'
attribute in IR.
Differential Revision: http://reviews.llvm.org/D12313
llvm-svn: 247104
Introduce an Address type to bundle a pointer value with an
alignment. Introduce APIs on CGBuilderTy to work with Address
values. Change core APIs on CGF/CGM to traffic in Address where
appropriate. Require alignments to be non-zero. Update a ton
of code to compute and propagate alignment information.
As part of this, I've promoted CGBuiltin's EmitPointerWithAlignment
helper function to CGF and made use of it in a number of places in
the expression emitter.
The end result is that we should now be significantly more correct
when performing operations on objects that are locally known to
be under-aligned. Since alignment is not reliably tracked in the
type system, there are inherent limits to this, but at least we
are no longer confused by standard operations like derived-to-base
conversions and array-to-pointer decay. I've also fixed a large
number of bugs where we were applying the complete-object alignment
to a pointer instead of the non-virtual alignment, although most of
these were hidden by the very conservative approach we took with
member alignment.
Also, because IRGen now reliably asserts on zero alignments, we
should no longer be subject to an absurd but frustrating recurring
bug where an incomplete type would report a zero alignment and then
we'd naively do a alignmentAtOffset on it and emit code using an
alignment equal to the largest power-of-two factor of the offset.
We should also now be emitting much more aggressive alignment
attributes in the presence of over-alignment. In particular,
field access now uses alignmentAtOffset instead of min.
Several times in this patch, I had to change the existing
code-generation pattern in order to more effectively use
the Address APIs. For the most part, this seems to be a strict
improvement, like doing pointer arithmetic with GEPs instead of
ptrtoint. That said, I've tried very hard to not change semantics,
but it is likely that I've failed in a few places, for which I
apologize.
ABIArgInfo now always carries the assumed alignment of indirect and
indirect byval arguments. In order to cut down on what was already
a dauntingly large patch, I changed the code to never set align
attributes in the IR on non-byval indirect arguments. That is,
we still generate code which assumes that indirect arguments have
the given alignment, but we don't express this information to the
backend except where it's semantically required (i.e. on byvals).
This is likely a minor regression for those targets that did provide
this information, but it'll be trivial to add it back in a later
patch.
I partially punted on applying this work to CGBuiltin. Please
do not add more uses of the CreateDefaultAligned{Load,Store}
APIs; they will be going away eventually.
llvm-svn: 246985
Fix processing of shared variables with reference types in OpenMP constructs. Previously, if the variable was not marked in one of the private clauses, the reference to this variable was emitted incorrectly and caused an assertion later.
llvm-svn: 246846
Added codegen for array section in 'depend' clause of 'task' directive. It emits to pointers, one for the begin of array section and another for the end of array section. Size of the section is calculated as (end + 1 - start) * sizeof(basic_element_type).
llvm-svn: 246422
Added codegen for array section in 'depend' clause of 'task' directive. It emits to pointers, one for the begin of array section and another for the end of array section. Size of the section is calculated as (end + 1 - start) * sizeof(basic_element_type).
llvm-svn: 246278
Summary:
float_cast_overflow is the only UBSan check without a source location attached.
This patch propagates SourceLocations where necessary to get them to the
EmitCheck() call.
Reviewers: rsmith, ABataev, rjmccall
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D11757
llvm-svn: 244568
tools/clang/test/CodeGen/packed-nest-unpacked.c contains this test:
struct XBitfield {
unsigned b1 : 10;
unsigned b2 : 12;
unsigned b3 : 10;
};
struct YBitfield {
char x;
struct XBitfield y;
} __attribute((packed));
struct YBitfield gbitfield;
unsigned test7() {
// CHECK: @test7
// CHECK: load i32, i32* getelementptr inbounds (%struct.YBitfield, %struct.YBitfield* @gbitfield, i32 0, i32 1, i32 0), align 4
return gbitfield.y.b2;
}
The "align 4" is actually wrong. Accessing all of "gbitfield.y" as a single
i32 is of course possible, but that still doesn't make it 4-byte aligned as
it remains packed at offset 1 in the surrounding gbitfield object.
This alignment was changed by commit r169489, which also introduced changes
to bitfield access code in CGExpr.cpp. Code before that change used to take
into account *both* the alignment of the field to be accessed within the
current struct, *and* the alignment of that outer struct itself; this logic
was removed by the above commit.
Neglecting to consider both values can cause incorrect code to be generated
(I've seen an unaligned access crash on SystemZ due to this bug).
In order to always use the best known alignment value, this patch removes
the CGBitFieldInfo::StorageAlignment member and replaces it with a
StorageOffset member specifying the offset from the start of the surrounding
struct to the bitfield's underlying storage. This offset can then be combined
with the best-known alignment for a bitfield access lvalue to determine the
alignment to use when accessing the bitfield's storage.
Differential Revision: http://reviews.llvm.org/D11034
llvm-svn: 241916
This is needed to use clang's command line option "-ftrap-function" for LTO and
enable changing the trap function name on a per-call-site basis.
rdar://problem/21225723
Differential Revision: http://reviews.llvm.org/D10831
llvm-svn: 241306
The patch is generated using this command:
$ tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
work/llvm/tools/clang
To reduce churn, not touching namespaces spanning less than 10 lines.
llvm-svn: 240270
This causes programs compiled with this flag to print a diagnostic when
a control flow integrity check fails instead of aborting. Diagnostics are
printed using UBSan's runtime library.
The main motivation of this feature over -fsanitize=vptr is fidelity with
the -fsanitize=cfi implementation: the diagnostics are printed under exactly
the same conditions as those which would cause -fsanitize=cfi to abort the
program. This means that the same restrictions apply regarding compiling
all translation units with -fsanitize=cfi, cross-DSO virtual calls are
forbidden, etc.
Differential Revision: http://reviews.llvm.org/D10268
llvm-svn: 240109
This flag controls whether a given sanitizer traps upon detecting
an error. It currently only supports UBSan. The existing flag
-fsanitize-undefined-trap-on-error has been made an alias of
-fsanitize-trap=undefined.
This change also cleans up some awkward behavior around the combination
of -fsanitize-trap=undefined and -fsanitize=undefined. Previously we
would reject command lines containing the combination of these two flags,
as -fsanitize=vptr is not compatible with trapping. This required the
creation of -fsanitize=undefined-trap, which excluded -fsanitize=vptr
(and -fsanitize=function, but this seems like an oversight).
Now, -fsanitize=undefined is an alias for -fsanitize=undefined-trap,
and if -fsanitize-trap=undefined is specified, we treat -fsanitize=vptr
as an "unsupported" flag, which means that we error out if the flag is
specified explicitly, but implicitly disable it if the flag was implied
by -fsanitize=undefined.
Differential Revision: http://reviews.llvm.org/D10464
llvm-svn: 240105
The RegionCounter type does a lot of legwork, but most of it is only
meaningful within the implementation of CodeGenPGO. The uses elsewhere
in CodeGen generally just want to increment or read counters, so do
that directly.
llvm-svn: 235664
This scheme checks that pointer and lvalue casts are made to an object of
the correct dynamic type; that is, the dynamic type of the object must be
a derived class of the pointee type of the cast. The checks are currently
only introduced where the class being casted to is a polymorphic class.
Differential Revision: http://reviews.llvm.org/D8312
llvm-svn: 232241
I disabled putting the new global into the same COMDAT as the function for now.
There's a fundamental problem when we inline references to the global but still
have the global in a COMDAT linked to the inlined function. Since this is only
an optimization there may be other versions of the COMDAT around that are
missing the new global and hell breaks loose at link time.
I hope the chromium build doesn't break this time :)
llvm-svn: 231564
This broke the Chromium build. Links were failing with messages like:
obj/dbus/libdbus_test_support.a(obj/dbus/dbus_test_support.mock_object_proxy.o):../../dbus/mock_object_proxy.cc:function dbus::MockObjectProxy::Detach(): warning: relocation refers to discarded section
/usr/local/google/work/chromium/src/third_party/binutils/Linux_x64/Release/bin/ld.gold: error: treating warnings as errors
llvm-svn: 231541
Instead of creating a copy on the stack just stash them in a private
constant global. This saves both the copying overhead and the stack
space, and gives the optimizer more room to constant fold.
This tries to make array temporaries more similar to regular arrays,
they can't use the same logic because a temporary has no VarDecl to be
bound to so we roll our own version here.
The original use case for this optimization was code like
for (int i : {1, 2, 3, 4, 5, 6, 7, 8, 10})
foo(i);
where without this patch (assuming that the loop is not unrolled) we
would alloca an array on the stack, copy the 10 values over and
iterate on that. With this patch we put the array in .text use it
directly. Apart from that case this helps on virtually any passing of
a constant std::initializer_list as a function argument.
Differential Revision: http://reviews.llvm.org/D8034
llvm-svn: 231508
Bools are a little tricky, they are i8 in memory and must be coerced
back to i1 before further operations can be performed on them.
This fixes PR22577.
llvm-svn: 229204
The /volatile:ms semantics turn volatile loads and stores into atomic
acquire and release operations. This distinction is important because
volatile memory operations do not form a happens-before relationship
with non-atomic memory. This means that a volatile store is not
sufficient for implementing a mutex unlock routine.
Differential Revision: http://reviews.llvm.org/D7580
llvm-svn: 229082
This causes things like assignment to refer to the '=' rather than the
LHS when attributing the store instruction, for example.
There were essentially 3 options for this:
* The beginning of an expression (this was the behavior prior to this
commit). This meant that stepping through subexpressions would bounce
around from subexpressions back to the start of the outer expression,
etc. (eg: x + y + z would go x, y, x, z, x (the repeated 'x's would be
where the actual addition occurred)).
* The end of an expression. This seems to be what GCC does /mostly/, and
certainly this for function calls. This has the advantage that
progress is always 'forwards' (never jumping backwards - except for
independent subexpressions if they're evaluated in interesting orders,
etc). "x + y + z" would go "x y z" with the additions occurring at y
and z after the respective loads.
The problem with this is that the user would still have to think
fairly hard about precedence to realize which subexpression is being
evaluated or which operator overload is being called in, say, an asan
backtrace.
* The preferred location or 'exprloc'. In this case you get sort of what
you'd expect, though it's a bit confusing in its own way due to going
'backwards'. In this case the locations would be: "x y + z +" in
lovely postfix arithmetic order. But this does mean that if the op+
were an operator overload, say, and in a backtrace, the backtrace will
point to the exact '+' that's being called, not to the end of one of
its operands.
(actually the operator overload case doesn't work yet for other reasons,
but that's being fixed - but this at least gets scalar/complex
assignments and other plain operators right)
llvm-svn: 227027
This workaround was to provide unique call sites to ensure LLVM's inline
debug info handling would properly unique two calls to the same function
on the same line. Instead, this has now been fixed in LLVM (r226736) and
the workaround here can be removed.
Originally committed in r176895, but this isn't a straight revert due to
all the changes since then. I just searched for anything ForcedColumn*
related and removed them.
We could test this - but it didn't strike me as terribly valuable once
we're no longer adding this workaround everything just works as expected
& it's no longer a special case to test for.
llvm-svn: 226738
Sorry for the noise, I managed to miss a bunch of recent regressions of
include orderings here. This should actually sort all the includes for
Clang. Again, no functionality changed, this is just a mechanical
cleanup that I try to run periodically to keep the #include lines as
regular as possible across the project.
llvm-svn: 225979
Several pieces of code were relying on implicit debug location setting
which usually lead to incorrect line information anyway. So I've fixed
those (in r225955 and r225845) separately which should pave the way for
this commit to be cleanly reapplied.
The reason these implicit dependencies resulted in crashes with this
patch is that the debug location would no longer implicitly leak from
one place to another, but be set back to invalid. Once a call with
no/invalid location was emitted, if that call was ever inlined it could
produce invalid debugloc chains and assert during LLVM's codegen.
There may be further cases of such bugs in this patch - they're hard to
flush out with regression testing, so I'll keep an eye out for reports
and investigate/fix them ASAP if they come up.
Original commit message:
Reapply "DebugInfo: Generalize debug info location handling"
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225956
Introduce the following -fsanitize-recover flags:
- -fsanitize-recover=<list>: Enable recovery for selected checks or
group of checks. It is forbidden to explicitly list unrecoverable
sanitizers here (that is, "address", "unreachable", "return").
- -fno-sanitize-recover=<list>: Disable recovery for selected checks or
group of checks.
- -f(no-)?sanitize-recover is now a synonym for
-f(no-)?sanitize-recover=undefined,integer and will soon be deprecated.
These flags are parsed left to right, and mask of "recoverable"
sanitizer is updated accordingly, much like what we do for -fsanitize= flags.
-fsanitize= and -fsanitize-recover= flag families are independent.
CodeGen change: If there is a single UBSan handler function, responsible
for implementing multiple checks, which have different recoverable setting,
then we emit two handler calls instead of one:
the first one for the set of "unrecoverable" checks, another one - for
set of "recoverable" checks. If all checks implemented by a handler have the
same recoverability setting, then the generated code will be the same.
llvm-svn: 225719
This reverts commit r225000, r225021, r225083, r225086, r225090.
The root change (r225000) still has several issues where it's caused
calls to be emitted without debug locations. This causes assertion
failures if/when those calls are inlined.
I'll work up some test cases and fixes before recommitting this.
llvm-svn: 225555
The DeclRefExpr might be for a variable initialized by a constant
expression which hasn't been ODR used.
Emit the initializer for the variable instead of trying to capture the
variable itself.
This fixes PR22071.
llvm-svn: 225060
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225000
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224941
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224385
Bitfield RefersToEnclosingLocal of Stmt::DeclRefExprBitfields renamed to RefersToCapturedVariable to reflect latest changes introduced in commit 224323. Also renamed method Expr::refersToEnclosingLocal() to Expr::refersToCapturedVariable() and comments for constant arguments.
No functional changes.
llvm-svn: 224329
Currently, if global variable is marked as a private OpenMP variable, the compiler crashes in debug version or generates incorrect code in release version. It happens because in the OpenMP region the original global variable is used instead of the generated private copy. It happens because currently globals variables are not captured in the OpenMP region.
This patch adds capturing of global variables iff private copy of the global variable must be used in the OpenMP region.
Differential Revision: http://reviews.llvm.org/D6259
llvm-svn: 224323
The extension has the following syntax:
__builtin_call_with_static_chain(Call, Chain)
where Call must be a function call expression and Chain must be of pointer type
This extension performs a function call Call with a static chain pointer
Chain passed to the callee in a designated register. This is useful for
calling foreign language functions whose ABI uses static chain pointers
(e.g. to implement closures).
Differential Revision: http://reviews.llvm.org/D6332
llvm-svn: 224167
This particularly helps the fidelity of ASan reports (which can occur
even in these examples - if, for example, one uses placement new over a
buffer of insufficient size - now ASan will correctly identify which
member's initialization went over the end of the buffer).
This doesn't cover all types of members - more coming.
llvm-svn: 223726
used inside blocks. It fixes a crash in naming code
for __func__ etc. when used in a block declared globally.
It also brings back old naming convention for
predefined expression which was broken. rdar://18961148
llvm-svn: 222065
Summary:
This change makes CodeGenFunction::EmitCheck() take several
conditions that needs to be checked (all of them need to be true),
together with sanitizer kinds these checks are for. This would allow
to split one call into UBSan runtime into several calls in case
different sanitizer kinds would have different recoverability
settings.
Tests should be fixed accordingly, I'm working on it.
Test Plan: regression test suite.
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D6219
llvm-svn: 221716
For all threadprivate variables which have constructor/destructor emit call to void __kmpc_threadprivate_register(ident_t * <Current Location>, void *<Original Global Addr>, kmpc_ctor <Constructor>, kmpc_cctor NULL, kmpc_dtor <Destructor>);
In expressions all references to such variables are replaced by calls to void *__kmpc_threadprivate_cached(ident_t *<Current Location>, kmp_int32 <Current Thread Id>, void *<Original Global Addr>, size_t <Size of Data>, void ***<Pointer to autogenerated cache – array of private copies of threadprivate variable>);
Test test/OpenMP/threadprivate_codegen.cpp checks that codegen is correct. Also it checks that codegen is correct after serialization/deserialization and one of passes verifies debug info.
Differential Revision: http://reviews.llvm.org/D4002
llvm-svn: 221663
Make sure CodeGenFunction::EmitCheck() knows which sanitizer
it emits check for. Make CheckRecoverableKind enum an
implementation detail and move it away from header.
Currently CheckRecoverableKind is determined by the type of
sanitizer ("unreachable" and "return" are unrecoverable,
"vptr" is always-recoverable, all the rest are recoverable).
This will change in future if we allow to specify which sanitizers
are recoverable, and which are not by -fsanitize-recover= flag.
No functionality change.
llvm-svn: 221635
Use the bitmask to store the set of enabled sanitizers instead of a
bitfield. On the negative side, it makes syntax for querying the
set of enabled sanitizers a bit more clunky. On the positive side, we
will be able to use SanitizerKind to eventually implement the
new semantics for -fsanitize-recover= flag, that would allow us
to make some sanitizers recoverable, and some non-recoverable.
No functionality change.
llvm-svn: 221558
SanitizerOptions is not even a POD now, so having global variable of
this type, is not nice. Instead, provide a regular constructor and clear()
method, and let each CodeGenFunction has its own copy of SanitizerOptions
it uses.
llvm-svn: 220920
Avoid an assertion when materializing a lifetime type aggregate temporary. When
performing CodeGen for ObjC++, we could generate a lifetime-only aggregate
temporary by using an initializer list (which is effectively an array). We
would reach through the temporary expression, fishing out the inner expression.
If this expression was a lifetime expression, we would attempt to emit this as a
scalar. This would eventually result in an assertion as the emission would
eventually assert that the expression being emitted has a scalar evaluation
kind.
Add a case to handle the aggregate expressions. Use the EmitAggExpr to emit the
aggregate expression rather than the EmitScalarInit.
Addresses PR21347.
llvm-svn: 220590
This commit changes the way we blacklist functions in ASan, TSan,
MSan and UBSan. We used to treat function as "blacklisted"
and turned off instrumentation in it in two cases:
1) Function is explicitly blacklisted by its mangled name.
This part is not changed.
2) Function is located in llvm::Module, whose identifier is
contained in the list of blacklisted sources. This is completely
wrong, as llvm::Module may not correspond to the actual source
file function is defined in. Also, function can be defined in
a header, in which case user had to blacklist the .cpp file
this header was #include'd into, not the header itself.
Such functions could cause other problems - for instance, if the
header was included in multiple source files, compiled
separately and linked into a single executable, we could end up
with both instrumented and non-instrumented version of the same
function participating in the same link.
After this change we will make blacklisting decision based on
the SourceLocation of a function definition. If a function is
not explicitly defined in the source file, (for example, the
function is compiler-generated and responsible for
initialization/destruction of a global variable), then it will
be blacklisted if the corresponding global variable is defined
in blacklisted source file, and will be instrumented otherwise.
After this commit, the active users of blacklist files may have
to revisit them. This is a backwards-incompatible change, but
I don't think it's possible or makes sense to support the
old incorrect behavior.
I plan to make similar change for blacklisting GlobalVariables
(which is ASan-specific).
llvm-svn: 219997
The functionality contained in CodeGenFunction::EmitAlignmentAssumption has
been moved to IRBuilder (so that it can also be used by LLVM-level code).
Remove this now-duplicate implementation in favor of the IRBuilder code.
llvm-svn: 219877
This change adds UBSan check to upcasts. Namely, when we
perform derived-to-base conversion, we:
1) check that the pointer-to-derived has suitable alignment
and underlying storage, if this pointer is non-null.
2) if vptr-sanitizer is enabled, and we perform conversion to
virtual base, we check that pointer-to-derived has a matching vptr.
llvm-svn: 219642
Assertion failed: "Computed __func__ length differs from type!"
Reworked PredefinedExpr representation with internal StringLiteral field for function declaration.
Differential Revision: http://reviews.llvm.org/D5365
llvm-svn: 219393
Summary:
Previously CodeGen assumed that static locals were emitted before they
could be accessed, which is true for automatic storage duration locals.
However, it is possible to have CodeGen emit a nested function that uses
a static local before emitting the function that defines the static
local, breaking that assumption.
Fix it by creating the static local upon access and ensuring that the
deferred function body gets emitted. We may not be able to emit the
initializer properly from outside the function body, so don't try.
Fixes PR18020. See also previous attempts to fix static locals in
PR6769 and PR7101.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4787
llvm-svn: 219265
Summary:
This add support for the C++11 feature, thread_local global variables.
The ABI Clang implements is an improvement of the MSVC ABI. Sadly,
further improvements could be made but not without sacrificing ABI
compatibility.
The feature is implemented as follows:
- All thread_local initialization routines are pointed to from the
.CRT$XDU section.
- All non-weak thread_local variables have their initialization routines
call from a single function instead of getting their own .CRT$XDU
section entry. This is done to open up optimization opportunities to
the compiler.
- All weak thread_local variables have their own .CRT$XDU section entry.
This entry is in a COMDAT with the global variable it is initializing;
this ensures that we will initialize the global exactly once.
- Destructors are registered in the initialization function using
__tlregdtor.
Differential Revision: http://reviews.llvm.org/D5597
llvm-svn: 219074
Summary:
This patch implements a new UBSan check, which verifies
that function arguments declared to be nonnull with __attribute__((nonnull))
are actually nonnull in runtime.
To implement this check, we pass FunctionDecl to CodeGenFunction::EmitCallArgs
(where applicable) and if function declaration has nonnull attribute specified
for a certain formal parameter, we compare the corresponding RValue to null as
soon as it's calculated.
Test Plan: regression test suite
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits, rnk
Differential Revision: http://reviews.llvm.org/D5082
llvm-svn: 217389
This makes use of the recently-added @llvm.assume intrinsic to implement a
__builtin_assume(bool) intrinsic (to provide additional information to the
optimizer). This hooks up __assume in MS-compatibility mode to mirror
__builtin_assume (the semantics have been intentionally kept compatible), and
implements GCC's __builtin_assume_aligned as assume((p - o) & mask == 0). LLVM
now contains special logic to deal with assumptions of this form.
llvm-svn: 217349
Summary:
This is a first small step towards passing generic "Expr" instead of
ArgBeg/ArgEnd pair into EmitCallArgs() family of methods. Having "Expr" will
allow us to get the corresponding FunctionDecl and its ParmVarDecls,
thus allowing us to alter CodeGen depending on the function/parameter
attributes.
No functionality change.
Test Plan: regression test suite
Reviewers: rnk
Reviewed By: rnk
Subscribers: aemerson, cfe-commits
Differential Revision: http://reviews.llvm.org/D4915
llvm-svn: 216214
It is responsible for generating metadata consumed by sanitizer instrumentation
passes in the backend. Move several methods from CodeGenModule to SanitizerMetadata.
For now the class is stateless, but soon it won't be the case.
Instead of creating globals providing source-level information to ASan, we will create
metadata nodes/strings which will be turned into actual global variables in the
backend (if needed).
No functionality change.
llvm-svn: 214564
This broke the following gdb tests:
gdb.base__annota1.exp
gdb.base__consecutive.exp
gdb.python__py-symtab.exp
gdb.reverse__consecutive-precsave.exp
gdb.reverse__consecutive-reverse.exp
I will look into this.
This reverts commit 214162.
llvm-svn: 214163
This allows us to give more precise diagnostics.
Diego kindly tested the impact on debug info size: "The increase on average
debug sizes is 0.1%. The total file size increase is ~0%."
llvm-svn: 214162
Otherwise -fsanitize=vptr causes the program to crash when it downcasts
a null pointer.
Reviewed in http://reviews.llvm.org/D4412.
Patch by Byoungyoung Lee!
llvm-svn: 213393
Summary:
This change adds description of globals created by UBSan
instrumentation (UBSan handlers, type descriptors, filenames) to
llvm.asan.globals metadata, effectively "blacklisting" them. This can
dramatically decrease the data section in binaries built with UBSan+ASan,
as UBSan tends to create a lot of handlers, and ASan instrumentation
increases the global size to at least 64 bytes.
Test Plan: clang regression test suite
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits, byoungyoung, kcc
Differential Revision: http://reviews.llvm.org/D4575
llvm-svn: 213392
This is used to mark the instructions emitted by Clang to implement
variety of UBSan checks. Generally, we don't want to instrument these
instructions with another sanitizers (like ASan).
Reviewed in http://reviews.llvm.org/D4544
llvm-svn: 213291
Teach UBSan vptr checker to ignore technically invalud down-casts on
blacklisted types.
Based on http://reviews.llvm.org/D4407 by Byoungyoung Lee!
llvm-svn: 212770
Now CodeGenFunction is responsible for looking at sanitizer blacklist
(in CodeGenFunction::StartFunction) and turning off instrumentation,
if necessary.
No functionality change.
llvm-svn: 212501
Summary:
This change generalizes the code used to create global LLVM
variables referencing predefined strings (e.g. __FUNCTION__): now it
just calls GetAddrOfConstantStringFromLiteral method. As a result,
global variables for these predefined strings may get mangled names
and linkonce_odr linkage. Fix the test accordingly.
Test Plan: clang regression tests
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4023
llvm-svn: 210284
This patch adds support for pointer types in global named registers variables.
It'll be lowered as a pair of read/write_register and inttoptr/ptrtoint calls.
Also adds some early checks on types on SemaDecl to avoid the assert.
Tests changed accordingly. (PR19837)
llvm-svn: 210274
That small change, although it looked harmless, it made emitting the LValue
on the PHI node without the proper cast. Reverting it fixes PR19841.
llvm-svn: 209663
Enables the emission of MS-compatible RTTI data structures for use with
typeid, dynamic_cast and exceptions. Does not implement dynamic_cast
or exceptions. As an artiface, typeid works in some cases but proper
support an testing will coming in a subsequent patch.
majnemer has fuzzed the results. Test cases included.
Differential Revision: http://reviews.llvm.org/D3833
llvm-svn: 209523
This patch implements global named registers in Clang, lowering to the just
created intrinsics in LLVM (@llvm.read/write_register). A new type of LValue
had to be created (Register), which just adds support to carry the metadata
node containing the name of the register. Two new methods to emit loads and
stores interoperate with another to emit the named metadata node.
No guarantees are being made and only non-allocatable global variable named
registers are being supported. Local named register support is unchanged.
llvm-svn: 209149
Also tidy up, simplify, and extend the test coverage to demonstrate the
limitations. This test should now fail if the bugs are fixed (&
hopefully whoever ends up in this situation sees the FIXMEs and realizes
that the test needs to be updated to positively test their change that
has fixed some or all of these issues).
I do wonder whether I could demonstrate breakage without a macro here,
but any way I slice it I can't think of a way to get two calls to the
same function on the same line/column in non-macro C++ - implicit
conversions happen at the same location as an explicit function, but
you'd never get an implicit conversion on the result of an explicit call
to the same implicit conversion operator (since the value is already
converted to the desired result)...
llvm-svn: 208468
It is very similar to GCC's __PRETTY_FUNCTION__, except it prints the
calling convention.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D3311
llvm-svn: 205780
The MS ABI requires that we determine the vbptr offset if have a
virtual inheritance model. Instead, raise an error pointing to the
diagnostic when this happens.
This fixes PR18583.
Differential Revision: http://llvm-reviews.chandlerc.com/D2842
llvm-svn: 201824
Previously, we made one traversal of the AST prior to codegen to assign
counters to the ASTs and then propagated the count values during codegen. This
patch now adds a separate AST traversal prior to codegen for the
-fprofile-instr-use option to propagate the count values. The counts are then
saved in a map from which they can be retrieved during codegen.
This new approach has several advantages:
1. It gets rid of a lot of extra PGO-related code that had previously been
added to codegen.
2. It fixes a serious bug. My original implementation (which was mailed to the
list but never committed) used 3 counters for every loop. Justin improved it to
move 2 of those counters into the less-frequently executed breaks and continues,
but that turned out to produce wrong count values in some cases. The solution
requires visiting a loop body before the condition so that the count for the
condition properly includes the break and continue counts. Changing codegen to
visit a loop body first would be a fairly invasive change, but with a separate
AST traversal, it is easy to control the order of traversal. I've added a
testcase (provided by Justin) to make sure this works correctly.
3. It improves the instrumentation overhead, reducing the number of counters for
a loop from 3 to 1. We no longer need dedicated counters for breaks and
continues, since we can just use the propagated count values when visiting
breaks and continues.
To make this work, I needed to make a change to the way we count case
statements, going back to my original approach of not including the fall-through
in the counter values. This was necessary because there isn't always an AST node
that can be used to record the fall-through count. Now case statements are
handled the same as default statements, with the fall-through paths branching
over the counter increments. While I was at it, I also went back to using this
approach for do-loops -- omitting the fall-through count into the loop body
simplifies some of the calculations and make them behave the same as other
loops. Whenever we start using this instrumentation for coverage, we'll need
to add the fall-through counts into the counter values.
llvm-svn: 201528
A return type is the declared or deduced part of the function type specified in
the declaration.
A result type is the (potentially adjusted) type of the value of an expression
that calls the function.
Rule of thumb:
* Declarations have return types and parameters.
* Expressions have result types and arguments.
llvm-svn: 200082
adjustFallThroughCount isn't a good name, and the documentation was
even worse. This commit attempts to clarify what it's for and when to
use it.
llvm-svn: 199139
With the introduction of explicit address space casts into LLVM, there's
a need to provide a new cast kind the front-end can create for C/OpenCL/CUDA
and code to produce address space casts from those kinds when appropriate.
Patch by Michele Scandale!
llvm-svn: 197036
In OpenCL a vector of 3 elements, acts like a vector of four elements.
So for a vector of size 3 the '.hi' and '.odd' accessors, would access
the elements {2, 3} and {1, 3} respectively.
However, in EmitStoreThroughExtVectorComponentLValue we are still operating on
a vector of size 3, so we should only access {2} and {1}. We do this by checking
the last element to be accessed, and ignore it if it is out-of-bounds.
EmitLoadOfExtVectorElementLValue doesn't have a similar problem, because it does
a direct shufflevector with undef, so an out-of-bounds access just gives an undef
value.
Patch by Anastasia Stulova!
llvm-svn: 195367
Summary:
Similar to __FUNCTION__, MSVC exposes the name of the enclosing mangled
function name via __FUNCDNAME__. This implementation is very naive and
unoptimized, it is expected that __FUNCDNAME__ would be used rarely in
practice.
Reviewers: rnk, rsmith, thakis
CC: cfe-commits, silvas
Differential Revision: http://llvm-reviews.chandlerc.com/D2109
llvm-svn: 194181
deallocation function (and the corresponding unsized deallocation function has
been declared), emit a weak discardable definition of the function that
forwards to the corresponding unsized deallocation.
This allows a C++ standard library implementation to provide both a sized and
an unsized deallocation function, where the unsized one does not just call the
sized one, for instance by putting both in the same object file within an
archive.
llvm-svn: 194055
check using the ubsan runtime) and -fsanitize=local-bounds (for the middle-end
check which inserts traps).
Remove -fsanitize=local-bounds from -fsanitize=undefined. It does not produce
useful diagnostics and has false positives (PR17635), and is not a good
compromise position between UBSan's checks and ASan's checks.
Map -fbounds-checking to -fsanitize=local-bounds to restore Clang's historical
behavior for that flag.
llvm-svn: 193205
This uses function prefix data to store function type information at the
function pointer.
Differential Revision: http://llvm-reviews.chandlerc.com/D1338
llvm-svn: 193058
An updated version of r191586 with bug fix.
Struct-path aware TBAA generates tags to specify the access path,
while scalar TBAA only generates tags to scalar types.
We should not generate a TBAA tag with null being the first field. When
a TBAA type node is null, the tag should be null too. Make sure we
don't decorate an instruction with a null TBAA tag.
Added a testing case for the bug reported by Richard with -relaxed-aliasing
and -fsanitizer=thread.
llvm-svn: 192145
The code in CGExpr was added back in 2012 (r165536) but not exercised in tests
until recently.
Detected on the MemorySanitizer bootstrap bot.
llvm-svn: 190521
This reverts commit r189320.
Alexey Samsonov and Dmitry Vyukov presented some arguments for keeping
these around - though it still seems like those tasks could be solved by
a tool just using the symbol table. In a very small number of cases,
thunks may be inlined & debug info might be able to save profilers &
similar tools from misclassifying those cases as part of the caller.
The extra changes here plumb through the VarDecl for various cases to
CodeGenFunction - this provides better fidelity through a few APIs but
generally just causes the CGF::StartFunction to fallback to using the
name of the IR function as the name in the debug info.
The changes to debug-info-global-ctor-dtor.cpp seem like goodness. The
two names that go missing (in favor of only emitting those names as
linkage names) are names that can be demangled - emitting them only as
the linkage name should encourage tools to do just that.
Again, thanks to Dinesh Dwivedi for investigation/work on this issue.
llvm-svn: 189421
- __func__ or __FUNCTION__ returns captured statement's parent
function name, not the one compiler generated.
Differential Revision: http://llvm-reviews.chandlerc.com/D1491
Reviewed by bkramer
llvm-svn: 189219
1. We now print the return type of lambdas and return type deduced functions
as "auto". Trailing return types with decltype print the underlying type.
2. Use the lambda or block scope for the PredefinedExpr type instead of the
parent function. This fixes PR16946, a strange mismatch between type of the
expression and the actual result.
3. Verify the type in CodeGen.
4. The type for blocks is still wrong. They are numbered and the name is not
known until CodeGen.
llvm-svn: 188900
Summary:
We would crash in CodeGen::CodeGenModule::EmitUuidofInitializer
because our attempt to enter CodeGen::CodeGenModule::EmitConstantValue
will be foiled: the type of the constant value is incomplete.
Instead, create an unnamed type with the proper layout on all platforms.
Punt the problem of wrongly defined struct _GUID types to the user.
(It's impossible because the TU may never get to see the type and thus
we can't verify that it is suitable.)
This fixes PR16856.
Reviewers: rsmith, rnk, thakis
Reviewed By: rnk
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1375
llvm-svn: 188481
Summary:
UBSan was checking for alignment of the derived class on the pointer to
the base class, before converting. With some class hierarchies, this could
generate false positives.
Added test-case.
llvm-svn: 187948
Restore it after each argument is emitted. This fixes the scope info for
inlined subroutines inside of function argument expressions. (E.g.,
anything STL).
rdar://problem/12592135
llvm-svn: 187240
This is the same way GenericSelectionExpr works, and it's generally a
more consistent approach.
A large part of this patch is devoted to caching the value of the condition
of a ChooseExpr; it's needed to avoid threading an ASTContext into
IgnoreParens().
Fixes <rdar://problem/14438917>.
llvm-svn: 186738
Introduce CXXStdInitializerListExpr node, representing the implicit
construction of a std::initializer_list<T> object from its underlying array.
The AST representation of such an expression goes from an InitListExpr with a
flag set, to a CXXStdInitializerListExpr containing a MaterializeTemporaryExpr
containing an InitListExpr (possibly wrapped in a CXXBindTemporaryExpr).
This more detailed representation has several advantages, the most important of
which is that the new MaterializeTemporaryExpr allows us to directly model
lifetime extension of the underlying temporary array. Using that, this patch
*drastically* simplifies the IR generation of this construct, provides IR
generation support for nested global initializer_list objects, fixes several
bugs where the destructors for the underlying array would accidentally not get
invoked, and provides constant expression evaluation support for
std::initializer_list objects.
llvm-svn: 183872
were lacking ExprWithCleanups nodes in some cases where the new approach to
lifetime extension needed them).
Original commit message:
Rework IR emission for lifetime-extended temporaries. Instead of trying to walk
into the expression and dig out a single lifetime-extended entity and manually
pull its cleanup outside the expression, instead keep a list of the cleanups
which we'll need to emit when we get to the end of the full-expression. Also
emit those cleanups early, as EH-only cleanups, to cover the case that the
full-expression does not terminate normally. This allows IR generation to
properly model temporary lifetime when multiple temporaries are extended by the
same declaration.
We have a pre-existing bug where an exception thrown from a temporary's
destructor does not clean up lifetime-extended temporaries created in the same
expression and extended to automatic storage duration; that is not fixed by
this patch.
llvm-svn: 183859
into the expression and dig out a single lifetime-extended entity and manually
pull its cleanup outside the expression, instead keep a list of the cleanups
which we'll need to emit when we get to the end of the full-expression. Also
emit those cleanups early, as EH-only cleanups, to cover the case that the
full-expression does not terminate normally. This allows IR generation to
properly model temporary lifetime when multiple temporaries are extended by the
same declaration.
We have a pre-existing bug where an exception thrown from a temporary's
destructor does not clean up lifetime-extended temporaries created in the same
expression and extended to automatic storage duration; that is not fixed by
this patch.
llvm-svn: 183721
EmitCapturedStmt creates a captured struct containing all of the captured
variables, and then emits a call to the outlined function. This is similar in
principle to EmitBlockLiteral.
GenerateCapturedFunction actually produces the outlined function. It is based
on GenerateBlockFunction, but is much simpler. The function type is determined
by the parameters that are in the CapturedDecl.
Some changes have been added to this patch that were reviewed as part of the
serialization patch and moving the parameters to the captured decl.
Differential Revision: http://llvm-reviews.chandlerc.com/D640
llvm-svn: 181536
a lambda.
Bug #1 is that CGF's CurFuncDecl was "stuck" at lambda invocation
functions. Fix that by generally improving getNonClosureContext
to look through lambdas and captured statements but only report
code contexts, which is generally what's wanted. Audit uses of
CurFuncDecl and getNonClosureAncestor for correctness.
Bug #2 is that lambdas weren't specially mapping 'self' when inside
an ObjC method. Fix that by removing the requirement for that
and using the normal EmitDeclRefLValue path in LoadObjCSelf.
rdar://13800041
llvm-svn: 181000
Add a CXXDefaultInitExpr, analogous to CXXDefaultArgExpr, and use it both in
CXXCtorInitializers and in InitListExprs to represent a default initializer.
There's an additional complication here: because the default initializer can
refer to the initialized object via its 'this' pointer, we need to make sure
that 'this' points to the right thing within the evaluation.
llvm-svn: 179958
non-constant constructors or non-trivial destructors. Plus bugfixes for
thread_local references bound to temporaries (the temporaries themselves are
lifetime-extended to become thread_local), and the corresponding case for
std::initializer_list.
llvm-svn: 179496
For struct-path aware TBAA, we used to use scalar type node as the scalar tag,
which has an incompatible format with the struct path tag. We now use the same
format: base type, access type and offset.
We also uniformize the scalar type node and the struct type node: name, a list
of pairs (offset + pointer to MDNode). For scalar type, we have a single pair.
These are to make implementaiton of aliasing rules easier.
llvm-svn: 179335
For this source:
const int &ref = someStruct.bitfield;
We used to generate this AST:
DeclStmt [...]
`-VarDecl [...] ref 'const int &'
`-MaterializeTemporaryExpr [...] 'const int' lvalue
`-ImplicitCastExpr [...] 'const int' lvalue <NoOp>
`-MemberExpr [...] 'int' lvalue bitfield .bitfield [...]
`-DeclRefExpr [...] 'struct X' lvalue ParmVar [...] 'someStruct' 'struct X'
Notice the lvalue inside the MaterializeTemporaryExpr, which is very
confusing (and caused an assertion to fire in the analyzer - PR15694).
We now generate this:
DeclStmt [...]
`-VarDecl [...] ref 'const int &'
`-MaterializeTemporaryExpr [...] 'const int' lvalue
`-ImplicitCastExpr [...] 'int' <LValueToRValue>
`-MemberExpr [...] 'int' lvalue bitfield .bitfield [...]
`-DeclRefExpr [...] 'struct X' lvalue ParmVar [...] 'someStruct' 'struct X'
Which makes a lot more sense. This allows us to remove code in both
CodeGen and AST that hacked around this special case.
The commit also makes Clang accept this (legal) C++11 code:
int &&ref = std::move(someStruct).bitfield
PR15694 / <rdar://problem/13600396>
llvm-svn: 179250
Added TBAABaseType and TBAAOffset in LValue. These two fields are initialized to
the actual type and 0, and are updated in EmitLValueForField.
Path-aware TBAA tags are enabled for EmitLoadOfScalar and EmitStoreOfScalar.
Added command line option -struct-path-tbaa.
llvm-svn: 178797
the balance between expected behavior and compatibility with the gdb
testsuite.
(GDB gets confused if we break an expression into multiple debug
stmts so we enable this behavior only for inlined functions. For the
full experience people can still use -gcolumn-info.)
llvm-svn: 177164
aggregate types in a profoundly wrong way that has to be
worked around in every call site, to getEvaluationKind,
which classifies and distinguishes between all of these
cases.
Also, normalize the API for loading and storing complexes.
I'm working on a larger patch and wanted to pull these
changes out, but it would have be annoying to detangle
them from each other.
llvm-svn: 176656
calls and declarations.
LLVM has a default CC determined by the target triple. This is
not always the actual default CC for the ABI we've been asked to
target, and so we sometimes find ourselves annotating all user
functions with an explicit calling convention. Since these
calling conventions usually agree for the simple set of argument
types passed to most runtime functions, using the LLVM-default CC
in principle has no effect. However, the LLVM optimizer goes
into histrionics if it sees this kind of formal CC mismatch,
since it has no concept of CC compatibility. Therefore, if this
module happens to define the "runtime" function, or got LTO'ed
with such a definition, we can miscompile; so it's quite
important to get this right.
Defining runtime functions locally is quite common in embedded
applications.
llvm-svn: 176286
Several places were still treating the Attribute object as respresenting
multiple attributes. Those places now use the AttributeSet to represent
multiple attributes.
llvm-svn: 174004
implementation; this is much more inline with the original implementation
(i.e., pre-ubsan) and does not require run-time library support.
The trapping implementation can be invoked using either '-fcatch-undefined-behavior'
or '-fsanitize=undefined-trap -fsanitize-undefined-trap-on-error', with the latter
being preferred. Eventually, the -fcatch-undefined-behavior' flag will be removed.
llvm-svn: 173848
When we are visiting the extern declaration of 'i' in
static int i = 99;
int foo() {
extern int i;
return i;
}
We should not try to handle it as if it was an function static. That is, we
must consider the written storage class.
Fixing this then exposes that the assert in EmitGlobalVarDeclLValue and the
if leading to its call are not completely accurate. They were passing before
because the second decl was marked as having external storage. I changed them
to check the linkage, which I find easier to understand.
Last but not least, there is something strange going on with cuda and opencl.
My guess is that the linkage computation for these languages needs to be
audited, but I didn't want to change that in this patch so I just updated
the storage classes to keep the current behavior.
Thanks to Reed Kotler for reporting this.
llvm-svn: 170827
We were emitting calls to blocks as if all arguments were
required --- i.e. with signature (A,B,C,D,...) rather than
(A,B,...). This patch fixes that and accounts for the
implicit block-context argument as a required argument.
In addition, this patch changes the function type under which
we call unprototyped functions on platforms like x86-64 that
guarantee compatibility of variadic functions with unprototyped
function types; previously we would always call such functions
under the LLVM type T (...)*, but now we will call them under
the type T (A,B,C,D,...)*. This last change should have no
material effect except for making the type conventions more
explicit; it was a side-effect of the most convenient implementation.
llvm-svn: 169588
generally support the C++11 memory model requirements for bitfield
accesses by relying more heavily on LLVM's memory model.
The primary change this introduces is to move from a manually aligned
and strided access pattern across the bits of the bitfield to a much
simpler lump access of all bits in the bitfield followed by math to
extract the bits relevant for the particular field.
This simplifies the code significantly, but relies on LLVM to
intelligently lowering these integers.
I have tested LLVM's lowering both synthetically and in benchmarks. The
lowering appears to be functional, and there are no really significant
performance regressions. Different code patterns accessing bitfields
will vary in how this impacts them. The only real regressions I'm seeing
are a few patterns where the LLVM code generation for loads that feed
directly into a mask operation don't take advantage of the x86 ability
to do a smaller load and a cheap zero-extension. This doesn't regress
any benchmark in the nightly test suite on my box past the noise
threshold, but my box is quite noisy. I'll be watching the LNT numbers,
and will look into further improvements to the LLVM lowering as needed.
llvm-svn: 169489
uncovered.
This required manually correcting all of the incorrect main-module
headers I could find, and running the new llvm/utils/sort_includes.py
script over the files.
I also manually added quite a few missing headers that were uncovered by
shuffling the order or moving headers up to be main-module-headers.
llvm-svn: 169237
objc_loadWeak. This retains and autorelease the weakly-refereced
object. This hidden autorelease sometimes makes __weak variable alive even
after the weak reference is erased, because the object is still referenced
by an autorelease pool. This patch overcomes this behavior by loading a
weak object via call to objc_loadWeakRetained(), followng it by objc_release
at appropriate place, thereby removing the hidden autorelease. // rdar://10849570
llvm-svn: 168740
checks to enable. Remove frontend support for -fcatch-undefined-behavior,
-faddress-sanitizer and -fthread-sanitizer now that they don't do anything.
llvm-svn: 167413
We want the diagnostic, and if the load is optimized away, we still want to
trap it. Stop checking non-default address spaces; that doesn't work in
general.
llvm-svn: 167219
initialized by a reference constant expression.
Our odr-use modeling still needs work here: we don't yet implement the 'set of
potential results of an expression' DR.
llvm-svn: 166361
Convert the uses of the Attributes class over to the new format. The
Attributes::get method call now takes an LLVM context so that the attributes
object can be uniquified and stored.
llvm-svn: 165918
Peter Collingbourne