In r305364, Rui changed the mechanism that parses -z option values slightly.
This caused a bug, as demonstrated by this test, which now fails:
---
# REQUIRES: x86
# RUN: llvm-mc -filetype=obj -triple=x86_64-pc-linux %s -o %t.o
# RUN: ld.lld %t.o -o %t -z max-page-size
.global _start
_start:
nop
---
Before, the link succeeded and set the max-page-size to the target default.
After we get the following two error messages:
"invalid max-page-size: "
"max-page-size: value isn't a power of 2"
The latter error is because an uninitialised variable ends up being passed back
to getMaxPageSize).
This change ensures we only get the first error.
Reviewers: ruiu
Differential Revision: https://reviews.llvm.org/D34234
llvm-svn: 305679
The get{ARM,AArch64}UndefinedRelativeWeakVA() functions should only be
called for PC-relative relocations. Complete the supported pc-relative
relocations in the switch statement and make the default case unreachable.
The R_ARM_TARGET relocation can be evaluated as R_ARM_REL32 but it is only
used in the context of exception tables, and is never output with respect
to a weak reference so it does not appear in the switch statement.
Differential Revision: https://reviews.llvm.org/D34138
llvm-svn: 305673
AVR support is somewhat exotic as generated ELF executables are not
directly consumed but objcopy'ed to write it to on-chip flush memory.
This comment describes it for those why a full-fledged ELF linker is
used to link programs for the 8-bit microcontroller.
llvm-svn: 305567
Target.cpp contains code for all the targets that LLD supports. It was
simple and easy, but as the number of supported targets increased,
it got messy.
This patch splits the file into per-target files under ELF/arch directory.
Differential Revision: https://reviews.llvm.org/D34222
llvm-svn: 305565
In preparation for supporting range extension thunks we now continually
call createThunks() until no more thunks are added. This requires us to
record the thunks we add on each pass and only merge the new ones into the
OutputSection. We also need to check if a Relocation is targeting a thunk
to prevent us from infinitely creating more thunks.
Differential Revision: https://reviews.llvm.org/D34034
llvm-svn: 305555
This is probably the main patch left in unifying our intermediary
representation.
It moves the creation of default commands before section sorting. This
has the nice effect that we now have one location where we decide
where an orphan section should be placed.
Before this patch sortSections would decide the relative location of
orphan sections to other sections, but it was up to placeOrphanSection
to decide on the exact location.
We now only sort sections we created since the linker script is
already in the correct order.
llvm-svn: 305512
This is necessary to ensure that sections containing symbols referenced
from linker scripts (e.g. in data commands) don't get GC'd.
Differential Revision: https://reviews.llvm.org/D34195
llvm-svn: 305452
Summary: I found that getString defined in the LLD's Driver.cpp is
exactly the same as Arg::getLastArgValue defined in
llvm/Option/ArgLIst.h. This patch removes that local function and use
the function that the Arg class provides.
Reviewers: ruiu
Subscribers: emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D34196
llvm-svn: 305374
Currently we do layout as if non alloc sections had an actual address
and then set it to zero. This produces a few odd results where a
symbol has an address that is inconsistent with the section address.
The simplest way to fix it is probably to just set the address earlier.
The behavior of bfd seems to be similar, but it only sets the non
alloc section address is missing from the linker script or if the
script has an explicit " : 0" setting the address of the output
section (which the default script does).
llvm-svn: 305323
The ELF standard defines that the SHT_GROUP section as follows:
- its sh_link has the symbol index, and
- the symbol name is used to uniquify section groups.
Object files created by GNU gold does not seem to comply with the
standard. They have this additional rule:
- if the symbol has no name and a STT_SECTION symbol, a section
name is used instead of a symbol name.
If we don't do anything for this, the linker fails with a mysterious
error message if input files are generated by gas. It is unfortunate
but I think we need to support it.
Differential Revision: https://reviews.llvm.org/D34064
llvm-svn: 305218
Given
.weak target
.global _start
_start:
b target
The intention is that the branch goes to the instruction after the
branch, effectively turning it on a nop. The branch adds the runtime
PC, but we were adding it statically too.
I noticed the oddity by inspection, but llvm-objdump seems to agree,
since it now prints things like:
b #-4 <_start+0x4>
llvm-svn: 305212
Relocations referring to merge sections are considered equal if they
resolve to the same offset in the same output section.
Differential Revision: https://reviews.llvm.org/D34094
llvm-svn: 305177
Currently the freebsd early boot code fails to link. The issue reduces
to 16 bit code at position 0x7000 wanting to jump to position
0x9000. That is represented in the .o file as a relocation with no
symbol and an addend of 0x9000 - 2 (The -2 is because i386 uses the ip
after the current instruction for jumps).
If the addend is interpreted as signed (it should), it is -28674. In a
32 bit architecture, that is the address 0xffff8ffe. To get there from
0x7000 we have to add 4294909950 (too big) or subtract 57346 (too
small). We then produce an error.
What lld is missing is the fact that at runtime this will actually be
a 16 bit architecture and adding 0x1ffe produces 0x8ffe which is the
correct result in 16 bits (-28674).
Since we have a 16 bit addend and a 16 bit PC, the relocation can move
the PC to any 16 bit address and that is the only thing we really need
to check: if the address we are pointing to fits in 16 bits. This is
unfortunately hard to do since we have to delay subtracting the PC and
if we want to do that outside of Target.cpp, we have to move the
overflow check out too. An incomplete patch that tries to do that is
at https://reviews.llvm.org/D34070
This patch instead just relaxes the check. Since the value we have is
the destination minus the PC and the PC is 16 bits, it should fit in
17 bits if the destination fits in 16 too.
bfd had a similar issue for some time and got a similar fix:
https://sourceware.org/ml/binutils/2005-08/msg00001.html
llvm-svn: 305135
SHF_GROUP bit doesn't make sense in executables or DSOs, so linkers are
expected to remove that bit from section flags. We did that when we create
output sections.
This patch is to do that earlier than before. Now the flag is dropped when
we instantiate input section objects.
This change improves ICF. Previously, two sections that differ only in
SHF_GROUP flag were not merged, because when the control reached ICF,
the flag was still there. Now the flag is dropped before reaching to ICF,
so the difference is ignored naturally.
This issue was found by pcc.
Differential Revision: https://reviews.llvm.org/D34074
llvm-svn: 305134
This is used by linux kernel build system.
(https://www.kernel.org/doc/Documentation/kbuild/makefiles.txt "3.2 Built-in object goals")
It has for example next configuration for linking built-in.o files:
drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y))
drivers-$(CONFIG_PCI) += arch/ia64/pci/
...
drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/
Im most simple case all CONFIG_* options are off. That means linker is called with empty input archive,
emulation option and no inputs and expected to generate some relocatable output.
ld.bfd is able to do that, we dont.
Patch allows to support this case.
Differential revision: https://reviews.llvm.org/D33937
llvm-svn: 305069
The symbols generated for Thunks have type STT_FUNC, to permit a thunk to
be reused via a blx instruction the Thumb bit (0) needs to be set properly.
Differential Revision: https://reviews.llvm.org/D34036
llvm-svn: 305065
Previously, it couldn't parse
SECTIONS .text (0x1000) : { *(.text) }
because "(" was interpreted as the begining of the "(NOLOAD)" directive.
llvm-svn: 305006
Without this, when building with shared BUILD_SHARED_LIBS=ON
I get errors such as:
lib/Core/Reader.cpp:40: error: undefined reference to
'llvm::identify_magic(llvm::StringRef)'
Differential Revision: https://reviews.llvm.org/D34004
llvm-svn: 304932
This patch reimplements .gdb_index in more natural way,
that makes proccess of switching to multithreaded index building to
be trivial.
Differential revision: https://reviews.llvm.org/D33552
llvm-svn: 304927
Approach significantly simplifies LLD .gdb_index code and makes it much faster.
Also it should resolve issues, like D33176 tries to address once and forever in a clean way.
LLC binary linking without patch and without --gdb-index: 1,599241063
LLC binary linking without patch and with --gdb-index: 6,064316262
LLC binary linking with patch and with --gdb-index: 4,116792104
Time spent for building gdbindex changes from (6,064316262 - 1,599241063 == 4,465075199)
to (4,116792104- 1,599241063 == 2,517551041).
That is 2,517551041/4,465075199 = 0,564 or about 44% speedup.
Differential revision: https://reviews.llvm.org/D33183
llvm-svn: 304895
Thunks are now generated per InputSectionDescription instead of per
OutputSection. This allows created ThunkSections to be inserted directly
into InputSectionDescription.
Changes in this patch:
- Loop over InputSectionDescriptions to find relocations to Thunks
- Generate a ThunkSection per InputSectionDescription
- Remove synchronize() as we no longer need it
- Move fabricateDefaultCommands() before createThunks
Differential Revision: https://reviews.llvm.org/D33835
llvm-svn: 304887
Previously we would merge relocation sections by name.
That did not work in some cases, like testcase shows.
Patch implements logic to merge relocation sections if their target
sections were merged into the same output section.
Differential revision: https://reviews.llvm.org/D33824
llvm-svn: 304886
When linking linux kernel LLD currently reports next errors:
ld: error: unable to evaluate expression: input section .head.text has no output section assigned
ld: error: At least one side of the expression must be absolute
ld: error: At least one side of the expression must be absolute
That does not provide file/line information and overall looks unclear.
Patch adds location information to ExprValue and that allows
to provide more clear error messages.
Differential revision: https://reviews.llvm.org/D33943
llvm-svn: 304881
James Henderson