Summary:
Implements PR889
Removing the virtual table pointer from Value saves 1% of RSS when doing
LTO of llc on Linux. The impact on time was positive, but too noisy to
conclusively say that performance improved. Here is a link to the
spreadsheet with the original data:
https://docs.google.com/spreadsheets/d/1F4FHir0qYnV0MEp2sYYp_BuvnJgWlWPhWOwZ6LbW7W4/edit?usp=sharing
This change makes it invalid to directly delete a Value, User, or
Instruction pointer. Instead, such code can be rewritten to a null check
and a call Value::deleteValue(). Value objects tend to have their
lifetimes managed through iplist, so for the most part, this isn't a big
deal. However, there are some places where LLVM deletes values, and
those places had to be migrated to deleteValue. I have also created
llvm::unique_value, which has a custom deleter, so it can be used in
place of std::unique_ptr<Value>.
I had to add the "DerivedUser" Deleter escape hatch for MemorySSA, which
derives from User outside of lib/IR. Code in IR cannot include MemorySSA
headers or call the MemoryAccess object destructors without introducing
a circular dependency, so we need some level of indirection.
Unfortunately, no class derived from User may have any virtual methods,
because adding a virtual method would break User::getHungOffOperands(),
which assumes that it can find the use list immediately prior to the
User object. I've added a static_assert to the appropriate OperandTraits
templates to help people avoid this trap.
Reviewers: chandlerc, mehdi_amini, pete, dberlin, george.burgess.iv
Reviewed By: chandlerc
Subscribers: krytarowski, eraman, george.burgess.iv, mzolotukhin, Prazek, nlewycky, hans, inglorion, pcc, tejohnson, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D31261
llvm-svn: 303362
Replace two places that duplicate the code of isLoopInvariant method with
the invocation of this method.
Differential Revision: https://reviews.llvm.org/D33313
llvm-svn: 303336
The probability of edge coming to unreachable block should be as low as possible.
The change reduces the probability to minimal value greater than zero.
The bug https://bugs.llvm.org/show_bug.cgi?id=32214 show the example when
the probability of edge coming to unreachable block is greater than for edge
coming to out of the loop and it causes incorrect loop rotation.
Please note that with this change the behavior of unreachable heuristic is a bit different
than others. Specifically, before this change the sum of probabilities
coming to unreachable blocks have the same weight for all branches
(it was just split over all edges of this block coming to unreachable blocks).
With this change it might be slightly different but not to much due to probability of
taken branch to unreachable block is really small.
Reviewers: chandlerc, sanjoy, vsk, congh, junbuml, davidxl, dexonsmith
Reviewed By: chandlerc, dexonsmith
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D30633
llvm-svn: 303327
Summary:
There are several places in the codebase that try to calculate a maximum value in a Statistic object. We currently do this in one of two ways:
MaxNumFoo = std::max(MaxNumFoo, NumFoo);
or
MaxNumFoo = (MaxNumFoo > NumFoo) ? MaxNumFoo : NumFoo;
The first version reads from MaxNumFoo one time and uncontionally rwrites to it. The second version possibly reads it twice depending on the result of the first compare. But we have no way of knowing if the value was changed by another thread between the reads and the writes.
This patch adds a method to the Statistic object that can ensure that we only store if our value is the max and the previous max didn't change after we read it. If it changed we'll recheck if our value should still be the max or not and try again.
This spawned from an audit I'm trying to do of all places we uses the implicit conversion to unsigned on the Statistics objects. See my previous thread on llvm-dev https://groups.google.com/forum/#!topic/llvm-dev/yfvxiorKrDQ
Reviewers: dberlin, chandlerc, hfinkel, dblaikie
Reviewed By: chandlerc
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D33301
llvm-svn: 303318
We already handled all of the new tests identically, but several
of those went through a lot of unnecessary processing before
getting folded.
Another motivation for grouping these cases together is that
InstCombine needs a similar fold. Currently, it handles the
'not' cases inefficiently which can lead to bugs as described
in the post-commit comments of:
https://reviews.llvm.org/D32143
llvm-svn: 303295
Sorting of AddRecExprs by loop nesting does not make sense since we only invoke
the CompareSCEVComplexity for AddRecExprs that are used by one SCEV. This
guarantees that there is always a dominance relationship between them. This
patch removes the sorting by nesting which is a dead code in current usage of
this function.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D33228
llvm-svn: 303235
We would eventually catch these via demanded bits and computing known bits in InstCombine,
but I think it's better to handle the simple cases as soon as possible as a matter of efficiency.
This fold allows further simplifications based on distributed ops transforms. eg:
%a = lshr i8 %x, 7
%b = or i8 %a, 2
%c = and i8 %b, 1
InstSimplify can directly fold this now:
%a = lshr i8 %x, 7
Differential Revision: https://reviews.llvm.org/D33221
llvm-svn: 303213
Update threshold based on callee's hotness only when BFI is not available.
Otherwise use only callsite's hotness. This makes it easier to reason about
hotness related threshold updates.
Differential revision: https://reviews.llvm.org/D33157
llvm-svn: 303210
ProfileSummaryInfo already checks whether the module has sample profile
in determining profile counts. This will also be useful in inliner to
clean up threshold updates.
llvm-svn: 303204
The existing sorting order in defined CompareSCEVComplexity sorts AddRecExprs
by loop depth, but does not pay attention to dominance of loops. This can
lead us to the following buggy situation:
for (...) { // loop1
op1 = {A,+,B}
}
for (...) { // loop2
op2 = {A,+,B}
S = add op1, op2
}
In this case there is no guarantee that in operand list of S the op2 comes
before op1 (loop depth is the same, so they will be sorted just
lexicographically), so we can incorrectly treat S as a recurrence of loop1,
which is wrong.
This patch changes the sorting logic so that it places the dominated recs
before the dominating recs. This ensures that when we pick the first recurrency
in the operands order, it will be the bottom-most in terms of domination tree.
The attached test set includes some tests that produce incorrect SCEV
estimations and crashes with oldlogic.
Reviewers: sanjoy, reames, apilipenko, anna
Reviewed By: sanjoy
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33121
llvm-svn: 303148
This function gives the wrong answer on some non-ELF platforms in some
cases. The function that does the right thing lives in Mangler.h. To try to
discourage people from using this function, give it a different name.
Differential Revision: https://reviews.llvm.org/D33162
llvm-svn: 303134
ARM Neon has native support for half-sized vector registers (64 bits). This
is beneficial for example for 2D and 3D graphics. This patch adds the option
to lower MinVecRegSize from 128 via a TTI in the SLP Vectorizer.
*** Performance Analysis
This change was motivated by some internal benchmarks but it is also
beneficial on SPEC and the LLVM testsuite.
The results are with -O3 and PGO. A negative percentage is an improvement.
The testsuite was run with a sample size of 4.
** SPEC
* CFP2006/482.sphinx3 -3.34%
A pretty hot loop is SLP vectorized resulting in nice instruction reduction.
This used to be a +22% regression before rL299482.
* CFP2000/177.mesa -3.34%
* CINT2000/256.bzip2 +6.97%
My current plan is to extend the fix in rL299482 to i16 which brings the
regression down to +2.5%. There are also other problems with the codegen in
this loop so there is further room for improvement.
** LLVM testsuite
* SingleSource/Benchmarks/Misc/ReedSolomon -10.75%
There are multiple small SLP vectorizations outside the hot code. It's a bit
surprising that it adds up to 10%. Some of this may be code-layout noise.
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer -8.40%
The opt-viewer screenshot can be seen at F3218284. We start at a colder store
but the tree leads us into the hottest loop.
* MultiSource/Applications/lambda-0.1.3/lambda -2.68%
* MultiSource/Benchmarks/Bullet/bullet -2.18%
This is using 3D vectors.
* SingleSource/Benchmarks/Shootout-C++/Shootout-C++-lists +6.67%
Noise, binary is unchanged.
* MultiSource/Benchmarks/Ptrdist/anagram/anagram +4.90%
There is an additional SLP in the cold code. The test runs for ~1sec and
prints out over 2000 lines. This is most likely noise.
* MultiSource/Applications/aha/aha +1.63%
* MultiSource/Applications/JM/lencod/lencod +1.41%
* SingleSource/Benchmarks/Misc/richards_benchmark +1.15%
Differential Revision: https://reviews.llvm.org/D31965
llvm-svn: 303116
Summary:
Merge overflow computation for signed add,
appearing both in InstCombine and ValueTracking.
As part of the merge,
cleanup the interface for overflow checks in InstCombine.
Patch by Yoav Ben-Shalom.
Reviewers: craig.topper, majnemer
Reviewed By: craig.topper
Subscribers: takuto.ikuta, llvm-commits
Differential Revision: https://reviews.llvm.org/D32946
llvm-svn: 303029
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
This is a follow up patch for https://reviews.llvm.org/rL300440
to address a comment.
To make implementation to be consistent with other cases we just
ignore the remainder after distribution of remaining probability between
reachable edges.
If we reduced the probability of some edges coming to unreachable
blocks we should distribute the remaining part across other edges
coming to reachable blocks to satisfy the condition that sum of all
probabilities should be equal to one. If this remaining part is not
divided by number of "reachable" edges then we get this remainder.
This remainder probability should be pretty small. Other cases just ignore
if the sum of probabilities is not equal to one so we do the same.
Reviewers: chandlerc, sanjoy, vsk, junbuml, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D32124
llvm-svn: 302883
Summary:
Don't use the metadata on call instructions for determining hotness
unless we are in sample PGO mode, where it is needed because profile
counts are not accurate. In instrumentation mode this is not necessary
and does more harm than good when calls have VP metadata that hasn't
been properly scaled after transformations or dropped after constant
prop based devirtualization (both should be fixed, but we don't need
to do this in the first place for instrumentation PGO).
This required adjusting a number of tests to distinguish between sample
and instrumentation PGO handling, and to add in profile summary metadata
so that getProfileCount can get the summary.
Reviewers: davidxl, danielcdh
Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D32877
llvm-svn: 302844
I ran the test-suite (including SPEC 2006) in PGO mode comparing cold
thresholds of 225 and 45. Here are some stats on the text size:
Out of 904 tests that ran, 197 see a change in text size. The average
text size reduction (of all the 904 binaries) is 1.07%. Of the 197
binaries, 19 see a text size increase, as high as 18%, but most of them
are small single source benchmarks. There are 3 multisource benchmarks
with a >0.5% size increase (0.7, 1.3 and 2.1 are their % increases). On
the other side of the spectrum, 31 benchmarks see >10% size reduction
and 6 of them are MultiSource.
I haven't run the test-suite with other values of inlinecold-threshold.
Since we have a cold callsite threshold of 45, I picked this value.
Differential revision: https://reviews.llvm.org/D33106
llvm-svn: 302829
This fixes a ubsan bot failure after r302597, which made getProfileCount
non-static, but ended up invoking it on a null ProfileSummaryInfo object
in some cases from buildModuleSummaryIndex.
Most testing passed because the non-static getProfileCount currently
doesn't access any member variables, but I found this when testing a
follow on patch (D32877) that adds a member variable access.
llvm-svn: 302705
This pass uses a new target hook to decide whether or not to expand a particular
intrinsic to the shuffevector sequence.
Differential Revision: https://reviews.llvm.org/D32245
llvm-svn: 302631
This change is required because the notion of count is different for
sample profiling and getProfileCount will need to determine the
underlying profile type.
Differential revision: https://reviews.llvm.org/D33012
llvm-svn: 302597
- This change allows targets to opt-in to using them instead of the log2
shufflevector algorithm.
- The SLP and Loop vectorizers have the common code to do shuffle reductions
factored out into LoopUtils, and now have a unified interface for generating
reductions regardless of the preference of the target. LoopUtils now uses TTI
to determine what kind of reductions the target wants to handle.
- For CodeGen, basic legalization support is added.
Differential Revision: https://reviews.llvm.org/D30086
llvm-svn: 302514
This patch uses KnownOnes of the input of ctlz/cttz to bound the value that can be returned from these intrinsics. This makes these intrinsics more similar to the handling for ctpop which already uses known bits to produce a similar bound.
Differential Revision: https://reviews.llvm.org/D32521
llvm-svn: 302444
This introduces a new interface for computeKnownBits that returns the KnownBits object instead of requiring it to be pre-constructed and passed in by reference.
This is a much more convenient interface as it doesn't require the caller to figure out the BitWidth to pre-construct the object. It's so convenient that I believe we can use this interface to remove the special ComputeSignBit flavor of computeKnownBits.
As a step towards that idea, this patch replaces all of the internal usages of ComputeSignBit with this new interface. As you can see from the patch there were a couple places where we called ComputeSignBit which really called computeKnownBits, and then called computeKnownBits again directly. I've reduced those places to only making one call to computeKnownBits. I bet there are probably external users that do it too.
A future patch will update the external users and remove the ComputeSignBit interface. I'll also working on moving more locations to the KnownBits returning interface for computeKnownBits.
Differential Revision: https://reviews.llvm.org/D32848
llvm-svn: 302437
Summary:
Minor refactoring of foldIdentityShuffles() which allows the removal of a
ConstantDataVector::get() in SimplifyShuffleVectorInstruction.
Reviewers: spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32955
Conflicts:
lib/Analysis/InstructionSimplify.cpp
llvm-svn: 302433
Summary:
Following up on Sanjay's suggetion in D32955, move this functionality
into ShuffleVectornstruction.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32956
llvm-svn: 302420
Summary:
Re-applying r301766 with a fix to a typo and a regression test.
The log message for r301766 was:
==================================================================================
InstructionSimplify: Canonicalize shuffle operands. NFC-ish.
Summary:
Apply canonicalization rules:
1. Input vectors with no elements selected from can be replaced with undef.
2. If only one input vector is constant it shall be the second one.
This allows constant-folding to cover more ad-hoc simplifications that
were in place and avoid duplication for RHS and LHS checks.
There are more rules we may want to add in the future when we see a
justification. e.g. mask elements that select undef elements can be
replaced with undef.
==================================================================================
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32863
llvm-svn: 302373
Summary: This makes setRange take ConstantRange by rvalue reference since most callers were passing an unnamed temporary ConstantRange. We can then move that ConstantRange into the DenseMap caches. For the callers that weren't passing a temporary, I've added std::move to to the local variable being passed.
Reviewers: sanjoy, mzolotukhin, efriedma
Reviewed By: sanjoy
Subscribers: takuto.ikuta, llvm-commits
Differential Revision: https://reviews.llvm.org/D32943
llvm-svn: 302371
We can simplify (or (icmp X, C1), (icmp X, C2)) to 'true' or one of the icmps in many cases.
I had to check some of these with Alive to prove to myself it's right, but everything seems
to check out. Eg, the deleted code in instcombine was completely ignoring predicates with
mismatched signedness.
This is a follow-up to:
https://reviews.llvm.org/rL301260https://reviews.llvm.org/D32143
llvm-svn: 302370
Daniel Berlin