The first argument in the constructor was ignored, and the remaining
arguments were always passed as their defaults.
Differential Revision: https://reviews.llvm.org/D64407
llvm-svn: 366188
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366164
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366158
The construction was explained in
https://reviews.llvm.org/D44810?id=139526#inline-391999 but reading the code
shouldn't require hunting down old reviews to understand it.
The precomputed list was missing an entry for the empty list case, and
one entry at the very end. (The current last entry is the last one where
3 * BucketCount fits in a signed int, but the reference implementation
uses unsigneds as far as I can tell, so there's room for one more entry.)
No behavior change for inputs seen in practice.
Differential Revision: https://reviews.llvm.org/D64738
llvm-svn: 366107
The traits object is only used by a few methods. Deserializing a hash
table and walking it is possible without the traits object, so it
shouldn't be required to build a dummy object for that use case.
The TraitsT object used to be a function template parameter before
r327647, this restores it to that state.
This makes it clear that the traits object isn't needed at all in 1 of
the current 3 uses of HashTable (and I am going to add another use that
doesn't need it), and that the default PdbHashTraits isn't used outside
of tests.
While here, also re-enable 3 checks in the test that were commented out
(which requires making HashTableInternals templated and giving FooBar
an operator==).
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D64640
llvm-svn: 365974
All callers had a PDBFile object at hand, so call
Pdb.createIndexedStream() instead, which pre-populates all the arguments
(and returns nullptr for kInvalidStreamIndex).
Also change safelyCreateIndexedStream() to only take the string index,
and update callers. Make the method public and call it in two places
that manually did the bounds checking before.
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D64633
llvm-svn: 365936
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
Currently, the symbolizer lib can only symbolize a file on disk.
This patch teaches the symbolizer lib to symbolize objects.
llvm-objdump needs this to support archive disassembly with source info.
https://bugs.llvm.org/show_bug.cgi?id=41871
Reviewed by: jhenderson, grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D63521
llvm-svn: 365376
This patch removes the part which tried to interpret addresses
in that section as offsets and simplifies the remaining code.
Differential Revision: https://reviews.llvm.org/D64020
llvm-svn: 364896
Delete unnecessary getters of AddressRange.
Simplify AddressRange::size(): Start <= End check should be checked in an upper layer.
Delete isContiguousWith() that doesn't make sense.
Simplify AddressRanges::insert. Delete commented code. Fix it when more than 1 ranges are to be deleted.
Delete trailing newline.
llvm-svn: 364637
Add the IR and the AsmPrinter parts for handling of the DW_OP_entry_values
DWARF operation.
([11/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60866
llvm-svn: 364542
The full GSYM patch started with: https://reviews.llvm.org/D53379
In that patch we wanted to split up getting GSYM into the LLVM code base so we are not committing too much code at once.
This is a first in a series of patches where I only add the foundation classes along with complete unit tests. They provide the foundation for encoding and decoding a GSYM file.
File entries are defined in llvm::gsym::FileEntry. This class splits the file up into a directory and filename represented by uniqued string table offsets. This allows all files that are referred to in a GSYM file to be encoded as 1 based indexes into a global file table in the GSYM file.
Function information in stored in llvm::gsym::FunctionInfo. This object represents a contiguous address range that has a name and range with an optional line table and inline call stack information.
Line table entries are defined in llvm::gsym::LineEntry. They store only address, file and line information to keep the line tables simple and allows the information to be efficiently encoded in a subsequent patch.
Inline information is defined in llvm::gsym::InlineInfo. These structs store the name of the inline function, along with one or more address ranges, and the file and line that called this function. They also contain any child inline information.
There are also utility classes for address ranges in llvm::gsym::AddressRange, and string table support in llvm::gsym::StringTable which are simple classes.
The unit tests test all the APIs on these simple classes so they will be ready for the next patches where we will create GSYM files and parse GSYM files.
Differential Revision: https://reviews.llvm.org/D63104
llvm-svn: 364427
This command prints a description of the referenced function's stack frame.
For each formal parameter and local variable, the tool prints:
- function name
- variable name
- file/line of declaration
- FP-relative variable location (if available)
- size in bytes
- HWASAN tag offset
This information will be used by the HWASAN runtime to identify local
variables in UAR reports.
Differential Revision: https://reviews.llvm.org/D63468
llvm-svn: 364225
The test only checks the existence of the `Types CU list` line.
Unfortunately I can't make a better test because
{gcc,clang} -fuse-ld={lld,gold} --gdb-index do not give me a non-empty types CU list.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D63537
llvm-svn: 363800
The only caller of SymbolizableObjectFile::create passes a non-null
DebugInfoContext and asserts that they do so. Move the assert into
SymbolizableObjectFile::create and remove null checks.
Differential Revision: https://reviews.llvm.org/D63298
llvm-svn: 363334
Summary: Deduplicate S_CONSTANTS when linking, if they have the same value.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63151
llvm-svn: 363089
This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
This allows the DWARFExpression class to handle addresses without
crashing on targets with 16-bit pointers like AVR.
This is required in order to generate assembly from clang via the '-S'
flag.
This fixes an error with the following message:
clang: llvm/include/llvm/DebugInfo/DWARF/DWARFExpression.h:132: llvm::DWARFExpression::DWARFExpression(llvm::DataExtractor, uint16_t, uint8_t):
Assertion `AddressSize == 8 || AddressSize == 4' failed.
llvm-svn: 362290
CodeView has its own register map which is defined in cvconst.h. Missing this
mapping before saving register to CodeView causes debugger to show incorrect
value for all register based variables, like variables in register and local
variables addressed by register (stack pointer + offset).
This change added mapping between LLVM register and CodeView register so the
correct register number will be stored to CodeView/PDB, it aso fixed the
mapping from CodeView register number to register name based on current
CPUType but print PDB to yaml still assumes X86 CPU and needs to be fixed.
Differential Revision: https://reviews.llvm.org/D62608
llvm-svn: 362280
This lead to errors when dumping binaries with v4 and v5 units linked
together (but could've also errored on v5 units that did/didn't use
str_offsets).
Also improves error handling and messages around invalid str_offsets
contributions.
llvm-svn: 361683
This adds `-parent-recurse-depth` which limits the number of parent DIEs
being dumped.
Differential revision: https://reviews.llvm.org/D62359
llvm-svn: 361671
This test case was incorrect because it mixed DWARF32 and DWARF64 for a
single unit (DWARF32 unit referencing a DWARF64 str_offsets section). So
fix enough of the unit parsing for DWARF64 and make the test valid.
(not sure if anyone needs DWARF64 support though - support in
libDebugInfoDWARF has been added piecemeal and LLVM doesn't produce it
at all)
llvm-svn: 361582
Summary:
This was flagged in https://www.viva64.com/en/b/0629/ under "Snippet No.
15" (see under #13). It looks like PVS studio flags nullptr checks where
the ptr is used inbetween creation and checking against nullptr.
Reviewers: JDevlieghere, probinson
Reviewed By: JDevlieghere
Subscribers: RKSimon, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62118
llvm-svn: 361176
r360876 didn't fix 2 call sites in clang.
Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
Follow-up of D61781.
llvm-svn: 360892
It broke the Clang build, see llvm-commits thread.
> Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
>
> Follow-up of D61781.
llvm-svn: 360878
Follow up to r359122, after a bug was reported in it - the original
change too aggressively tried to move related types out of type units,
which included unnamed types (like array types) which can't reasonably
be declared-but-not-defined.
A step beyond that is that some types in type units can be anonymous, if
they are types with a name for linkage purposes (eg: "typedef struct { }
x;"). So ensure those don't get turned into plain declarations (without
signatures) because, lacking names, they can't be resolved to the
definition.
[Also include a fix for llvm-dwarfdump/libDebugInfoDWARF to pretty print
types in type units]
llvm-svn: 360458
Summary:
Prior to DWARF v5, a directory index of 0 represents DW_AT_comp_dir.
In DWARF v5, the index starts with 0 and Entry.DirIdx is the index into
Prologue.IncludeDirectories.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D61253
llvm-svn: 360015
lld-link used to write PDB files that DIA couldn't recover natvis
files from if:
- The global strings table was > 64kiB
- There were at least 3 natvis files
The cause was that the hash function for the /src/headerblock stream
was incorrect: It needs to be truncated to 16 bit.
If the global strings table was <= 64kiB, truncating to 16 bit is a
no-op, so this wasn't needed for small programs.
If there are only 1 or 2 natvis files, then the growth strategy in
HashTable::grow() would mean the hash table would have 2 buckets (for 1
natvis file) or 4 buckets (for 4 natvis files), and since the hash
function is used modulo number of buckets, and since 2 and 4 divide
0x10000, the missing `% 0x10000` is a no-op there too. For 3 natvis
files, the hash table grows to 6 buckets, which has a factor that's not
common with 0x10000 and the difference starts to matter.
Fixes PR41626.
Differential Revision: https://reviews.llvm.org/D61277
llvm-svn: 359515
This is very minor issue. The returned section index is only used by
DWARFDebugLine as an llvm::upper_bound input and the use case shouldn't
cause any behavioral change.
llvm-svn: 358814
Another attempt to land the changes in debug line header to prevent duplicate
files in Dwarf 5. I rolled back my previous commit because of a mistake in
generating the object file in a test. Meanwhile, I addressed some offline
comments and changed the implementation; the largest difference is that
MCDwarfLineTableHeader does not keep DwarfVersion but gets it as a parameter. I
also merged the patch to fix two lld tests that will strt to fail into this
patch.
Original Commit:
https://reviews.llvm.org/D59515
Original Message:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf
5) However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
llvm-svn: 358732
It didn't handle empty LHS correctly. If two ranges of LHS were
contiguous and jointly contained one range of RHS, it could also be incorrect.
DWARFAddressRange::contains can be removed and its tests can be merged into DWARFVerifier::DieRangeInfo::contains
llvm-svn: 358387
Summary:
Make DW_LNS_copy set the discriminator register to 0, to conform to
DWARF 4 & 5: "Then it sets the discriminator register to 0, and sets the
basic_block, prologue_end and epilogue_begin registers to false."
Because all of DW_LNE_end_sequence, DN_LNS_copy, and special opcodes reset
discriminator to 0, we can move discriminator=0 to appendRowToMatrix.
Also, make DW_LNS_copy print before appending the row, as it is similar
to a address+=0,line+=0 special opcode, which prints before appending
the row.
Reviewers: dblaikie, probinson, aprantl
Reviewed By: dblaikie
Subscribers: danielcdh, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60364
llvm-svn: 358148
We want the last row whose address is less than or equal to Address.
This can be computed as upper_bound - 1, which is simpler than
lower_bound followed by skipping equal rows in a loop.
Since FirstRow (LowPC) does not satisfy the predicate (OrderByAddress)
while LastRow-1 (HighPC) satisfies the predicate. We can decrease the
search range by two, i.e.
upper_bound [FirstRow,LastRow) = upper_bound [FirstRow+1,LastRow-1)
llvm-svn: 358053
In a sorted list of non-overlapping [LowPC,HighPC) ranges, locating an address with
upper_bound on HighPC is simpler than lower_bound on LowPC.
llvm-svn: 358012
The current lower_bound approach has to check two iterators pos and pos-1.
Changing it to upper_bound allows us to check one iterator (similar to
DWARFUnitVector::getUnitFor*).
llvm-svn: 357834
In general, llvm-symbolizer follows the output style of GNU's addr2line.
However, there are still some differences; in particular, for a requested
address, llvm-symbolizer prints line and column, while addr2line prints
only the line number.
This patch adds a new switch to select the preferred style.
Differential Revision: https://reviews.llvm.org/D60190
llvm-svn: 357675
Summary:
Now CVType and CVSymbol are effectively type-safe wrappers around
ArrayRef<uint8_t>. Make the kind() accessor load it from the
RecordPrefix, which is the same for types and symbols.
Reviewers: zturner, aganea
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60018
llvm-svn: 357658
The standard doesn't require a DW_TAG_variable, DW_TAG_formal_parameter
or DW_TAG_constant to A DW_AT_type attribute describing the type of the
variable. It only specifies that it *can* have one.
llvm-svn: 357628
This avoids allocating a few KB of heap memory on startup, and instead
allocates these maps lazily. I noticed this while profiling LLD.
llvm-svn: 357192
This reverts commit rL357020.
The commit broke the test llvm/test/tools/llvm-objdump/embedded-source.test
on some builds including clang-ppc64be-linux-multistage,
clang-s390x-linux, clang-with-lto-ubuntu, clang-x64-windows-msvc,
llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast (and others).
llvm-svn: 357026
Reapply rL356941 after regenerating the object file in the failing test
llvm/test/tools/llvm-objdump/embedded-source.test from source.
Original commit message:
[llvm] Prevent duplicate files in debug line header in dwarf 5.
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 357018
Summary:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Reviewers: dblaikie, probinson, aprantl, espindola
Reviewed By: probinson
Subscribers: emaste, jvesely, nhaehnle, aprantl, javed.absar, arichardson, hiraditya, MaskRay, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 356941
[Symbolizer] Add getModuleSectionIndexForAddress() helper routine
The https://reviews.llvm.org/D58194 patch changed symbolizer interface.
Particularily it requires not only Address but SectionIndex also.
Note object::SectionedAddress parameter:
Expected<DILineInfo> symbolizeCode(const std::string &ModuleName,
object::SectionedAddress ModuleOffset,
StringRef DWPName = "");
There are callers of symbolizer which do not know particular section index.
That patch creates getModuleSectionIndexForAddress() routine which
will detect section index for the specified address. Thus if caller
set ModuleOffset.SectionIndex into object::SectionedAddress::UndefSection
state then symbolizer would detect section index using
getModuleSectionIndexForAddress routine.
Differential Revision: https://reviews.llvm.org/D58848
llvm-svn: 356829
Summary:
getRelocatedValue may compute incorrect value for SHT_RELA-typed relocation entries.
// DWARFDataExtractor.cpp
uint64_t DWARFDataExtractor::getRelocatedValue(uint32_t Size, uint32_t *Off,
...
// This formula is correct for REL, but may be incorrect for RELA if the value
// stored in the location (getUnsigned(Off, Size)) is not zero.
return getUnsigned(Off, Size) + Rel->Value;
In this patch, we
* refactor these visit* functions to include a new parameter `uint64_t A`.
Since these visit* functions are no longer used as visitors, rename them to resolve*.
+ REL: A is used as the addend. A is the value stored in the location where the
relocation applies: getUnsigned(Off, Size)
+ RELA: The addend encoded in RelocationRef is used, e.g. getELFAddend(R)
* and add another set of supports* functions to check if a given relocation type is handled.
DWARFObjInMemory uses them to fail early.
Reviewers: echristo, dblaikie
Reviewed By: echristo
Subscribers: mgorny, aprantl, aheejin, fedor.sergeev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57939
llvm-svn: 356729
Summary:
This considers module symbol streams and the global symbol stream to be
roots. Most types that this considers "unreferenced" are referenced by
LF_UDT_MOD_SRC_LINE id records, which VC seems to always include.
Essentially, they are types that the user can only find in the debugger
if they call them by name, they cannot be found by traversing a symbol.
In practice, around 80% of type information in a PDB is referenced by a
symbol. That seems like a reasonable number.
I don't really plan to do anything with this tool. It mostly just exists
for informational purposes, and to confirm that we probably don't need
to implement type reference tracking in LLD. We can continue to merge
all types as we do today without wasting space.
Reviewers: zturner, aganea
Subscribers: mgorny, hiraditya, arphaman, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59620
llvm-svn: 356692
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356451
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356442
Before, empty debug streams were written as 8 bytes (4 bytes signature + 4 bytes for the GlobalRefs count).
With this patch, unused empty streams aren't emitted anymore. Modules now encode 65535 as an 'unused stream' value, by convention.
Also fix the * Linker * contrib section which wasn't correctly emitted previously.
Differential Revision: https://reviews.llvm.org/D59502
llvm-svn: 356395
Summary:
This is similar to how addr2line handles consecutive entries with the
same address - pick the last one.
Reviewers: dblaikie, friss, JDevlieghere
Reviewed By: dblaikie
Subscribers: eugenis, vitalybuka, echristo, JDevlieghere, probinson, aprantl, hiraditya, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D58952
llvm-svn: 356265
Summary:
This is similar to how addr2line handles consecutive entries with the
same address - pick the last one.
Reviewers: dblaikie, friss, JDevlieghere
Reviewed By: dblaikie
Subscribers: ormris, echristo, JDevlieghere, probinson, aprantl, hiraditya, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D58952
llvm-svn: 355972
Igor Kudrin