Commit Graph

110 Commits

Author SHA1 Message Date
Matt Morehouse fd0a2f75ff Revert "Refactor mutation strategies into a standalone library"
This reverts commit c4a41cd77c due to
buildbot failure.
2021-05-26 15:16:43 -07:00
Aaron Green c4a41cd77c Refactor mutation strategies into a standalone library
This change introduces libMutagen/libclang_rt.mutagen.a as a subset of libFuzzer/libclang_rt.fuzzer.a. This library contains only the fuzzing strategies used by libFuzzer to produce new test inputs from provided inputs, dictionaries, and SanitizerCoverage feedback.

Most of this change is simply moving sections of code to one side or the other of the library boundary. The only meaningful new code is:

* The Mutagen.h interface and its implementation in Mutagen.cpp.
* The following methods in MutagenDispatcher.cpp:
  * UseCmp
  * UseMemmem
  * SetCustomMutator
  * SetCustomCrossOver
  * LateInitialize (similar to the MutationDispatcher's original constructor)
  * Mutate_AddWordFromTORC (uses callbacks instead of accessing TPC directly)
  * StartMutationSequence
  * MutationSequence
  * DictionaryEntrySequence
  * RecommendDictionary
  * RecommendDictionaryEntry
* FuzzerMutate.cpp (which now justs sets callbacks and handles printing)
* MutagenUnittest.cpp (which adds tests of Mutagen.h)

A note on performance: This change was tested with a 100 passes of test/fuzzer/LargeTest.cpp with 1000 runs per pass, both with and without the change. The running time distribution was qualitatively similar both with and without the change, and the average difference was within 30 microseconds (2.240 ms/run vs 2.212 ms/run, respectively). Both times were much higher than observed with the fully optimized system clang (~0.38 ms/run), most likely due to the combination of CMake "dev mode" settings (e.g. CMAKE_BUILD_TYPE="Debug", LLVM_ENABLE_LTO=OFF, etc.). The difference between the two versions built similarly seems to be "in the noise" and suggests no meaningful performance degradation.

Reviewed By: morehouse

Differential Revision: https://reviews.llvm.org/D102447
2021-05-26 13:27:49 -07:00
Alexey Vishnyakov 827ccc93b8 [fuzzer] Print reloaded file paths
In order to integrate libFuzzer with a dynamic symbolic execution tool
Sydr we need to print loaded file paths.

Reviewed By: morehouse

Differential Revision: https://reviews.llvm.org/D100303
2021-04-16 10:00:24 -07:00
Matt Morehouse 4b82f61474 [libFuzzer] Use macro instead of __attribute__.
This should fix the Windows buildbot errors.
2021-03-12 14:36:57 -08:00
Jonas Paulsson 5908c7ca41 [libFuzzer] Add attribute noinline on Fuzzer::ExecuteCallback().
The inlining of this function needs to be disabled as it is part of the
inpsected stack traces. It's string representation will look different
depending on if it was inlined or not which will cause it's string comparison
to fail.

When it was inlined in only one of the two execution stacks,
minimize_two_crashes.test failed on SystemZ. For details see
https://bugs.llvm.org/show_bug.cgi?id=49152.

Reviewers: Ulrich Weigand, Matt Morehouse, Arthur Eubanks

Differential Revision: https://reviews.llvm.org/D97975
2021-03-11 21:05:22 -06:00
Aaron Green 6708186c91 [crt][fuzzer] Fix up various numeric conversions
Attempting to build a standalone libFuzzer in Fuchsia's default toolchain for the purpose of cross-compiling the unit tests  revealed a number of not-quite-proper type conversions. Fuchsia's toolchain include `-std=c++17` and `-Werror`, among others, leading to many errors like `-Wshorten-64-to-32`, `-Wimplicit-float-conversion`, etc.

Most of these have been addressed by simply making the conversion explicit with a `static_cast`. These typically fell into one of two categories: 1) conversions between types where high precision isn't critical, e.g. the "energy" calculations for `InputInfo`, and 2) conversions where the values will never reach the bits being truncated, e.g. `DftTimeInSeconds` is not going to exceed 136 years.

The major exception to this is the number of features: there are several places that treat features as `size_t`, and others as `uint32_t`. This change makes the decision to cap the features at 32 bits. The maximum value of a feature as produced by `TracePC::CollectFeatures` is roughly:
  (NumPCsInPCTables + ValueBitMap::kMapSizeInBits + ExtraCountersBegin() - ExtraCountersEnd() + log2(SIZE_MAX)) * 8

It's conceivable for extremely large targets and/or extra counters that this limit could be reached. This shouldn't break fuzzing, but it will cause certain features to collide and lower the fuzzers overall precision. To address this, this change adds a warning to TracePC::PrintModuleInfo about excessive feature size if it is detected, and recommends refactoring the fuzzer into several smaller ones.

Reviewed By: morehouse

Differential Revision: https://reviews.llvm.org/D97992
2021-03-11 16:01:28 -08:00
Max Moroz dc62d5ec97 [libFuzzer] Added -print_full_coverage flag.
-print_full_coverage=1 produces a detailed branch coverage dump when run on a single file.
Uses same infrastructure as -print_coverage flag, but prints all branches (regardless of coverage status) in an easy-to-parse format.
Usage: For internal use with machine learning fuzzing models which require detailed coverage information on seed files to generate mutations.

Differential Revision: https://reviews.llvm.org/D85928
2020-10-23 16:05:54 -07:00
mhl 66df98945e [libfuzzer] Reduce default verbosity when printing large mutation sequences
When using a custom mutator (e.g. thrift mutator, similar to LPM)
that calls back into libfuzzer's mutations via `LLVMFuzzerMutate`, the mutation
sequences needed to achieve new coverage can get prohibitively large.

Printing these large sequences has two downsides:

1) It makes the logs hard to understand for a human.
2) The performance cost slows down fuzzing.

In this patch I change the `PrintMutationSequence` function to take a max
number of entries, to achieve this goal. I also update `PrintStatusForNewUnit`
to default to printing only 10 entries, in the default verbosity level (1),
requiring the user to set verbosity to 2 if they want the full mutation
sequence.

For our use case, turning off verbosity is not an option, as that would also
disable `PrintStats()` which is very useful for infrastructure that analyzes
the logs in realtime. I imagine most users of libfuzzer always want those logs
in the default.

I built a fuzzer locally with this patch applied to libfuzzer.

When running with the default verbosity, I see logs like this:

    #65 NEW    cov: 4799 ft: 10443 corp: 41/1447Kb lim: 64000 exec/s: 1 rss: 575Mb L: 28658/62542 MS: 196 Custom-CrossOver-ChangeBit-EraseBytes-ChangeBit-ChangeBit-ChangeBit-CrossOver-ChangeBit-CrossOver- DE: "\xff\xff\xff\x0e"-"\xfe\xff\xff\x7f"-"\xfe\xff\xff\x7f"-"\x17\x00\x00\x00\x00\x00\x00\x00"-"\x00\x00\x00\xf9"-"\xff\xff\xff\xff"-"\xfa\xff\xff\xff"-"\xf7\xff\xff\xff"-"@\xff\xff\xff\xff\xff\xff\xff"-"E\x00"-
    #67 NEW    cov: 4810 ft: 10462 corp: 42/1486Kb lim: 64000 exec/s: 1 rss: 577Mb L: 39823/62542 MS: 135 Custom-CopyPart-ShuffleBytes-ShuffleBytes-ChangeBit-ChangeBinInt-EraseBytes-ChangeBit-ChangeBinInt-ChangeBit- DE: "\x01\x00\x00\x00\x00\x00\x01\xf1"-"\x00\x00\x00\x07"-"\x00\x0d"-"\xfd\xff\xff\xff"-"\xfe\xff\xff\xf4"-"\xe3\xff\xff\xff"-"\xff\xff\xff\xf1"-"\xea\xff\xff\xff"-"\x00\x00\x00\xfd"-"\x01\x00\x00\x05"-

Staring hard at the logs it's clear that the cap of 10 is applied.

When running with verbosity level 2, the logs look like the below:

    #66    NEW    cov: 4700 ft: 10188 corp: 37/1186Kb lim: 64000 exec/s: 2 rss: 509Mb L: 47616/61231 MS: 520 Custom-CopyPart-ChangeBinInt-ChangeBit-ChangeByte-EraseBytes-PersAutoDict-CopyPart-ShuffleBytes-ChangeBit-ShuffleBytes-CopyPart-EraseBytes-CopyPart-ChangeBinInt-CopyPart-ChangeByte-ShuffleBytes-ChangeBinInt-ShuffleBytes-ChangeBit-CMP-ShuffleBytes-ChangeBit-CrossOver-ChangeBinInt-ChangeByte-ShuffleBytes-CrossOver-EraseBytes-ChangeBinInt-InsertRepeatedBytes-PersAutoDict-InsertRepeatedBytes-InsertRepeatedBytes-CrossOver-ChangeByte-ShuffleBytes-CopyPart-ShuffleBytes-CopyPart-CrossOver-ChangeBit-ShuffleBytes-CrossOver-PersAutoDict-ChangeByte-ChangeBit-ShuffleBytes-CrossOver-ChangeByte-EraseBytes-CopyPart-ChangeBinInt-PersAutoDict-CrossOver-ShuffleBytes-CrossOver-CrossOver-EraseBytes-CrossOver-EraseBytes-CrossOver-ChangeBit-ChangeBinInt-ChangeByte-EraseBytes-ShuffleBytes-ShuffleBytes-ChangeBit-EraseBytes-ChangeBinInt-ChangeBit-ChangeBinInt-CopyPart-EraseBytes-PersAutoDict-EraseBytes-CopyPart-ChangeBinInt-ChangeByte-CrossOver-ChangeBinInt-ShuffleBytes-PersAutoDict-PersAutoDict-ChangeBinInt-CopyPart-ChangeBinInt-CrossOver-ChangeBit-ChangeBinInt-CopyPart-ChangeByte-ChangeBit-CopyPart-CrossOver-ChangeByte-ChangeBit-ChangeByte-ShuffleBytes-CMP-ChangeBit-CopyPart-ChangeBit-ChangeByte-ChangeBinInt-PersAutoDict-ChangeBinInt-CrossOver-ChangeBinInt-ChangeBit-ChangeBinInt-ChangeBinInt-PersAutoDict-ChangeBinInt-ChangeBinInt-ChangeByte-CopyPart-ShuffleBytes-ChangeByte-ChangeBit-ChangeByte-ChangeByte-EraseBytes-CrossOver-ChangeByte-ChangeByte-EraseBytes-EraseBytes-InsertRepeatedBytes-ShuffleBytes-CopyPart-CopyPart-ChangeBit-ShuffleBytes-PersAutoDict-ShuffleBytes-ChangeBit-ChangeByte-ChangeBit-ShuffleBytes-ChangeByte-ChangeBinInt-CrossOver-ChangeBinInt-ChangeBit-EraseBytes-CopyPart-ChangeByte-CrossOver-EraseBytes-CrossOver-ChangeByte-ShuffleBytes-ChangeByte-ChangeBinInt-CrossOver-ChangeByte-InsertRepeatedBytes-InsertByte-ShuffleBytes-PersAutoDict-ChangeBit-ChangeByte-ChangeBit-ShuffleBytes-ShuffleBytes-CopyPart-ShuffleBytes-EraseBytes-ShuffleBytes-ShuffleBytes-CrossOver-ChangeBinInt-CopyPart-CopyPart-CopyPart-EraseBytes-EraseBytes-ChangeByte-ChangeBinInt-ShuffleBytes-CMP-InsertByte-EraseBytes-ShuffleBytes-CopyPart-ChangeBit-CrossOver-CopyPart-CopyPart-ShuffleBytes-ChangeByte-ChangeByte-ChangeBinInt-EraseBytes-ChangeByte-ChangeBinInt-ChangeBit-ChangeBit-ChangeByte-ShuffleBytes-PersAutoDict-PersAutoDict-CMP-ChangeBit-ShuffleBytes-PersAutoDict-ChangeBinInt-EraseBytes-EraseBytes-ShuffleBytes-ChangeByte-ShuffleBytes-ChangeBit-EraseBytes-CMP-ShuffleBytes-ChangeByte-ChangeBinInt-EraseBytes-ChangeBinInt-ChangeByte-EraseBytes-ChangeByte-CrossOver-ShuffleBytes-EraseBytes-EraseBytes-ShuffleBytes-ChangeBit-EraseBytes-CopyPart-ShuffleBytes-ShuffleBytes-CrossOver-CopyPart-ChangeBinInt-ShuffleBytes-CrossOver-InsertByte-InsertByte-ChangeBinInt-ChangeBinInt-CopyPart-EraseBytes-ShuffleBytes-ChangeBit-ChangeBit-EraseBytes-ChangeByte-ChangeByte-ChangeBinInt-CrossOver-ChangeBinInt-ChangeBinInt-ShuffleBytes-ShuffleBytes-ChangeByte-ChangeByte-ChangeBinInt-ShuffleBytes-CrossOver-EraseBytes-CopyPart-CopyPart-CopyPart-ChangeBit-ShuffleBytes-ChangeByte-EraseBytes-ChangeByte-InsertRepeatedBytes-InsertByte-InsertRepeatedBytes-PersAutoDict-EraseBytes-ShuffleBytes-ChangeByte-ShuffleBytes-ChangeBinInt-ShuffleBytes-ChangeBinInt-ChangeBit-CrossOver-CrossOver-ShuffleBytes-CrossOver-CopyPart-CrossOver-CrossOver-CopyPart-ChangeByte-ChangeByte-CrossOver-ChangeBit-ChangeBinInt-EraseBytes-ShuffleBytes-EraseBytes-CMP-PersAutoDict-PersAutoDict-InsertByte-ChangeBit-ChangeByte-CopyPart-CrossOver-ChangeByte-ChangeBit-ChangeByte-CopyPart-ChangeBinInt-EraseBytes-CrossOver-ChangeBit-CrossOver-PersAutoDict-CrossOver-ChangeByte-CrossOver-ChangeByte-ChangeByte-CrossOver-ShuffleBytes-CopyPart-CopyPart-ShuffleBytes-ChangeByte-ChangeByte-ChangeBinInt-ChangeBinInt-ChangeBinInt-ChangeBinInt-ShuffleBytes-CrossOver-ChangeBinInt-ShuffleBytes-ChangeBit-PersAutoDict-ChangeBinInt-ShuffleBytes-ChangeBinInt-ChangeByte-CrossOver-ChangeBit-CopyPart-ChangeBit-ChangeBit-CopyPart-ChangeByte-PersAutoDict-ChangeBit-ShuffleBytes-ChangeByte-ChangeBit-CrossOver-ChangeByte-CrossOver-ChangeByte-CrossOver-ChangeBit-ChangeByte-ChangeBinInt-PersAutoDict-CopyPart-ChangeBinInt-ChangeBit-CrossOver-ChangeBit-PersAutoDict-ShuffleBytes-EraseBytes-CrossOver-ChangeByte-ChangeBinInt-ShuffleBytes-ChangeBinInt-InsertRepeatedBytes-PersAutoDict-CrossOver-ChangeByte-Custom-PersAutoDict-CopyPart-CopyPart-ChangeBinInt-ShuffleBytes-ChangeBinInt-ChangeBit-ShuffleBytes-CrossOver-CMP-ChangeByte-CopyPart-ShuffleBytes-CopyPart-CopyPart-CrossOver-CrossOver-CrossOver-ShuffleBytes-ChangeByte-ChangeBinInt-ChangeBit-ChangeBit-ChangeBit-ChangeByte-EraseBytes-ChangeByte-ChangeBit-ChangeByte-ChangeByte-CopyPart-PersAutoDict-ChangeBinInt-PersAutoDict-PersAutoDict-PersAutoDict-CopyPart-CopyPart-CrossOver-ChangeByte-ChangeBinInt-ShuffleBytes-ChangeBit-CopyPart-EraseBytes-CopyPart-CopyPart-CrossOver-ChangeByte-EraseBytes-ShuffleBytes-ChangeByte-CopyPart-EraseBytes-CopyPart-CrossOver-ChangeBinInt-ChangeBinInt-InsertByte-ChangeBinInt-ChangeBit-ChangeByte-CopyPart-ChangeByte-EraseBytes-ChangeByte-ChangeBit-ChangeByte-ShuffleBytes-CopyPart-ChangeBinInt-EraseBytes-CrossOver-ChangeBit-ChangeBit-CrossOver-EraseBytes-ChangeBinInt-CopyPart-CopyPart-ChangeBinInt-ChangeBit-EraseBytes-InsertRepeatedBytes-EraseBytes-ChangeBit-CrossOver-CrossOver-EraseBytes-EraseBytes-ChangeByte-CopyPart-CopyPart-ShuffleBytes-ChangeByte-ChangeBit-ChangeByte-EraseBytes-ChangeBit-ChangeByte-ChangeByte-CrossOver-CopyPart-EraseBytes-ChangeByte-EraseBytes-ChangeByte-ShuffleBytes-ShuffleBytes-ChangeByte-CopyPart-ChangeByte-ChangeByte-ChangeBit-CopyPart-ChangeBit-ChangeBinInt-CopyPart-ShuffleBytes-ChangeBit-ChangeBinInt-ChangeBit-EraseBytes-CMP-CrossOver-CopyPart-ChangeBinInt-CrossOver-CrossOver-CopyPart-CrossOver-CrossOver-InsertByte-InsertByte-CopyPart-Custom- DE: "warn"-"\x00\x00\x00\x80"-"\xfe\xff\xff\xfb"-"\xff\xff"-"\x10\x00\x00\x00"-"\xfe\xff\xff\xff"-"\xff\xff\xff\xf6"-"U\x01\x00\x00\x00\x00\x00\x00"-"\xd9\xff\xff\xff"-"\xfe\xff\xff\xea"-"\xf0\xff\xff\xff"-"\xfc\xff\xff\xff"-"warn"-"\xff\xff\xff\xff"-"\xfe\xff\xff\xfb"-"\x00\x00\x00\x80"-"\xfe\xff\xff\xf1"-"\xfe\xff\xff\xea"-"\x00\x00\x00\x00\x00\x00\x012"-"\xe2\x00"-"\xfb\xff\xff\xff"-"\x00\x00\x00\x00"-"\xe9\xff\xff\xff"-"\xff\xff"-"\x00\x00\x00\x80"-"\x01\x00\x04\xc9"-"\xf0\xff\xff\xff"-"\xf9\xff\xff\xff"-"\xff\xff\xff\xff\xff\xff\xff\x12"-"\xe2\x00"-"\xfe\xff\xff\xff"-"\xfe\xff\xff\xea"-"\xff\xff\xff\xff"-"\xf4\xff\xff\xff"-"\xe9\xff\xff\xff"-"\xf1\xff\xff\xff"-
    #48    NEW    cov: 4502 ft: 9151 corp: 27/750Kb lim: 64000 exec/s: 2 rss: 458Mb L: 50772/50772 MS: 259 ChangeByte-ShuffleBytes-ChangeBinInt-ChangeByte-ChangeByte-ChangeByte-ChangeByte-ChangeBit-CopyPart-CrossOver-CopyPart-ChangeByte-CrossOver-CopyPart-ChangeBit-ChangeByte-EraseBytes-ChangeByte-CopyPart-CopyPart-CopyPart-ChangeBit-EraseBytes-ChangeBinInt-CrossOver-CopyPart-CrossOver-CopyPart-ChangeBit-ChangeByte-ChangeBit-InsertByte-CrossOver-InsertRepeatedBytes-InsertRepeatedBytes-InsertRepeatedBytes-ChangeBinInt-EraseBytes-InsertRepeatedBytes-InsertByte-ChangeBit-ShuffleBytes-ChangeBit-ChangeBit-CopyPart-ChangeBit-ChangeByte-CrossOver-ChangeBinInt-ChangeByte-CrossOver-CMP-ChangeByte-CrossOver-ChangeByte-ShuffleBytes-ShuffleBytes-ChangeByte-ChangeBinInt-CopyPart-EraseBytes-CrossOver-ChangeBit-ChangeBinInt-InsertByte-ChangeBit-CopyPart-ChangeBinInt-ChangeByte-CrossOver-ChangeBit-EraseBytes-CopyPart-ChangeBinInt-ChangeBit-ChangeBit-ChangeByte-CopyPart-ChangeBinInt-CrossOver-PersAutoDict-ChangeByte-ChangeBit-ChangeByte-ChangeBinInt-ChangeBinInt-EraseBytes-CopyPart-CopyPart-ChangeByte-ChangeByte-EraseBytes-PersAutoDict-CopyPart-ChangeByte-ChangeByte-EraseBytes-CrossOver-CopyPart-CopyPart-CopyPart-ChangeByte-ChangeBit-CMP-CopyPart-ChangeBinInt-ChangeBinInt-CrossOver-ChangeBit-ChangeBit-EraseBytes-ChangeByte-ShuffleBytes-ChangeBit-ChangeBinInt-CMP-InsertRepeatedBytes-CopyPart-Custom-ChangeByte-CrossOver-EraseBytes-ChangeBit-CopyPart-CrossOver-CMP-ShuffleBytes-EraseBytes-CrossOver-PersAutoDict-ChangeByte-CrossOver-CopyPart-CrossOver-CrossOver-ShuffleBytes-ChangeBinInt-CrossOver-ChangeBinInt-ShuffleBytes-PersAutoDict-ChangeByte-EraseBytes-ChangeBit-CrossOver-EraseBytes-CrossOver-ChangeBit-ChangeBinInt-EraseBytes-InsertByte-InsertRepeatedBytes-InsertByte-InsertByte-ChangeByte-ChangeBinInt-ChangeBit-CrossOver-ChangeByte-CrossOver-EraseBytes-ChangeByte-ShuffleBytes-ChangeBit-ChangeBit-ShuffleBytes-CopyPart-ChangeByte-PersAutoDict-ChangeBit-ChangeByte-InsertRepeatedBytes-CMP-CrossOver-ChangeByte-EraseBytes-ShuffleBytes-CrossOver-ShuffleBytes-ChangeBinInt-ChangeBinInt-CopyPart-PersAutoDict-ShuffleBytes-ChangeBit-CopyPart-ShuffleBytes-CopyPart-EraseBytes-ChangeByte-ChangeBit-ChangeBit-ChangeBinInt-ChangeByte-CopyPart-EraseBytes-ChangeBinInt-EraseBytes-EraseBytes-PersAutoDict-CMP-PersAutoDict-CrossOver-CrossOver-ChangeBit-CrossOver-PersAutoDict-CrossOver-CopyPart-ChangeByte-EraseBytes-ChangeByte-ShuffleBytes-ChangeByte-ChangeByte-CrossOver-ChangeBit-EraseBytes-ChangeByte-EraseBytes-ChangeBinInt-CrossOver-CrossOver-EraseBytes-ChangeBinInt-CrossOver-ChangeBit-ShuffleBytes-ChangeBit-ChangeByte-EraseBytes-ChangeBit-CrossOver-CrossOver-CrossOver-ChangeByte-ChangeBit-ShuffleBytes-ChangeBit-ChangeBit-EraseBytes-CrossOver-CrossOver-CopyPart-ShuffleBytes-ChangeByte-ChangeByte-CopyPart-CrossOver-CopyPart-CrossOver-CrossOver-EraseBytes-EraseBytes-ShuffleBytes-InsertRepeatedBytes-ChangeBit-CopyPart-Custom- DE: "\xfe\xff\xff\xfc"-"\x00\x00\x00\x00"-"F\x00"-"\xf3\xff\xff\xff"-"St9exception"-"_\x00\x00\x00"-"\xf6\xff\xff\xff"-"\xfe\xff\xff\xff"-"\x00\x00\x00\x00"-"p\x02\x00\x00\x00\x00\x00\x00"-"\xfe\xff\xff\xfb"-"\xff\xff"-"\xff\xff\xff\xff"-"\x01\x00\x00\x07"-"\xfe\xff\xff\xfe"-

These are prohibitively large and of limited value in the default case (when
someone is running the fuzzer, not debugging it), in my opinion.

Reviewed By: morehouse

Differential Revision: https://reviews.llvm.org/D86658
2020-09-16 09:20:57 -07:00
Dokyung Song 1bb1eac6b1 [libFuzzer] Add a command-line option for tracing mutation of corpus inputs in the dot graph format.
This patch adds a new command-line option -mutation_graph_file=FILE for
debugging purposes, which traces how corpus inputs evolve during a fuzzing
run. For each new input that is added to the corpus, a new vertex corresponding
to the added input, as well as a new edge that connects its base input to itself
are written to the given file. Each vertex is labeled with the filename of the
input, and each edge is labeled with the mutation sequence that led to the input
w.r.t. its base input.

The format of the mutation graph file is the dot file format. Once prepended and
appended with "graph {" and "}", respectively, the graph becomes a valid dot
file and can be visualized.

Differential Revision: https://reviews.llvm.org/D86560
2020-09-09 03:28:53 +00:00
Dokyung Song 5cda4dc7b4 [libFuzzer] Scale energy assigned to each input based on input execution time.
This patch scales the energy computed by the Entropic schedule based on the
execution time of each input. The input execution time is compared with the
average execution time of inputs in the corpus, and, based on the amount by
which they differ, the energy is scaled from 0.1x (for inputs executing slow) to
3x (for inputs executing fast). Note that the exact scaling criteria and formula
is borrowed from AFL.

On FuzzBench, this gives a sizeable throughput increase, which in turn leads to
more coverage on several benchmarks. For details, see the following report.

https://storage.googleapis.com/fuzzer-test-suite-public/exectime-report/index.html

Differential Revision: https://reviews.llvm.org/D86092
2020-09-03 20:38:20 +00:00
Dokyung Song b53243e194 [libFuzzer] Evenly select inputs to cross over with from the corpus regardless of the input's coverage.
This patch adds an option "cross_over_uniform_dist", which, if 1, considers all
inputs in the corpus for the crossover input selection. More specifically, this
patch uses a uniform distribution of all inputs in the corpus for the CrossOver
input selection. Note that input selection for mutation is still fully
determined by the scheduling policy (i.e., vanilla or Entropic); the uniform
distribution only applies to the secondary input selection, only for the
crossover mutation of the base input chosen by the scheduling policy. This way
the corpus inputs that have useful fragments in them, even though they are
deprioritized by the scheduling policy, have chances of getting mixed with other
inputs that are prioritized and selected as base input for mutation.

Differential Revision: https://reviews.llvm.org/D86954
2020-09-03 19:47:00 +00:00
Dokyung Song 62673c430d [libFuzzer] Add an option to keep initial seed inputs around.
This patch adds an option "keep_seed" to keep all initial seed inputs in the
corpus. Previously, only the initial seed inputs that find new coverage were
added to the corpus, and all the other initial inputs were discarded. We
observed in some circumstances that useful initial seed inputs are discarded as
they find no new coverage, even though they contain useful fragments in them
(e.g., SQLITE3 FuzzBench benchmark). This newly added option provides a way to
keeping seed inputs in the corpus for those circumstances. With this patch, and
with -keep_seed=1, all initial seed inputs are kept in the corpus regardless of
whether they find new coverage or not. Further, these seed inputs are not
replaced with smaller inputs even if -reduce_inputs=1.

Differential Revision: https://reviews.llvm.org/D86577
2020-09-03 15:54:39 +00:00
Matt Morehouse 7139736261 Revert "[libfuzzer] Reduce default verbosity when printing large mutation sequences"
This reverts commit 2665425908 due to
buildbot failure.
2020-09-01 12:49:41 -07:00
mhl 2665425908 [libfuzzer] Reduce default verbosity when printing large mutation sequences
When using a custom mutator (e.g. thrift mutator, similar to LPM)
that calls back into libfuzzer's mutations via `LLVMFuzzerMutate`, the mutation
sequences needed to achieve new coverage can get prohibitively large.

Printing these large sequences has two downsides:

1) It makes the logs hard to understand for a human.
2) The performance cost slows down fuzzing.

In this patch I change the `PrintMutationSequence` function to take a max
number of entries, to achieve this goal. I also update `PrintStatusForNewUnit`
to default to printing only 10 entries, in the default verbosity level (1),
requiring the user to set verbosity to 2 if they want the full mutation
sequence.

For our use case, turning off verbosity is not an option, as that would also
disable `PrintStats()` which is very useful for infrastructure that analyzes
the logs in realtime. I imagine most users of libfuzzer always want those logs
in the default.

I built a fuzzer locally with this patch applied to libfuzzer.

When running with the default verbosity, I see logs like this:

    #65 NEW    cov: 4799 ft: 10443 corp: 41/1447Kb lim: 64000 exec/s: 1 rss: 575Mb L: 28658/62542 MS: 196 Custom-CrossOver-ChangeBit-EraseBytes-ChangeBit-ChangeBit-ChangeBit-CrossOver-ChangeBit-CrossOver- DE: "\xff\xff\xff\x0e"-"\xfe\xff\xff\x7f"-"\xfe\xff\xff\x7f"-"\x17\x00\x00\x00\x00\x00\x00\x00"-"\x00\x00\x00\xf9"-"\xff\xff\xff\xff"-"\xfa\xff\xff\xff"-"\xf7\xff\xff\xff"-"@\xff\xff\xff\xff\xff\xff\xff"-"E\x00"-
    #67 NEW    cov: 4810 ft: 10462 corp: 42/1486Kb lim: 64000 exec/s: 1 rss: 577Mb L: 39823/62542 MS: 135 Custom-CopyPart-ShuffleBytes-ShuffleBytes-ChangeBit-ChangeBinInt-EraseBytes-ChangeBit-ChangeBinInt-ChangeBit- DE: "\x01\x00\x00\x00\x00\x00\x01\xf1"-"\x00\x00\x00\x07"-"\x00\x0d"-"\xfd\xff\xff\xff"-"\xfe\xff\xff\xf4"-"\xe3\xff\xff\xff"-"\xff\xff\xff\xf1"-"\xea\xff\xff\xff"-"\x00\x00\x00\xfd"-"\x01\x00\x00\x05"-

Staring hard at the logs it's clear that the cap of 10 is applied.

When running with verbosity level 2, the logs look like the below:

    #66    NEW    cov: 4700 ft: 10188 corp: 37/1186Kb lim: 64000 exec/s: 2 rss: 509Mb L: 47616/61231 MS: 520 Custom-CopyPart-ChangeBinInt-ChangeBit-ChangeByte-EraseBytes-PersAutoDict-CopyPart-ShuffleBytes-ChangeBit-ShuffleBytes-CopyPart-EraseBytes-CopyPart-ChangeBinInt-CopyPart-ChangeByte-ShuffleBytes-ChangeBinInt-ShuffleBytes-ChangeBit-CMP-ShuffleBytes-ChangeBit-CrossOver-ChangeBinInt-ChangeByte-ShuffleBytes-CrossOver-EraseBytes-ChangeBinInt-InsertRepeatedBytes-PersAutoDict-InsertRepeatedBytes-InsertRepeatedBytes-CrossOver-ChangeByte-ShuffleBytes-CopyPart-ShuffleBytes-CopyPart-CrossOver-ChangeBit-ShuffleBytes-CrossOver-PersAutoDict-ChangeByte-ChangeBit-ShuffleBytes-CrossOver-ChangeByte-EraseBytes-CopyPart-ChangeBinInt-PersAutoDict-CrossOver-ShuffleBytes-CrossOver-CrossOver-EraseBytes-CrossOver-EraseBytes-CrossOver-ChangeBit-ChangeBinInt-ChangeByte-EraseBytes-ShuffleBytes-ShuffleBytes-ChangeBit-EraseBytes-ChangeBinInt-ChangeBit-ChangeBinInt-CopyPart-EraseBytes-PersAutoDict-EraseBytes-CopyPart-ChangeBinInt-ChangeByte-CrossOver-ChangeBinInt-ShuffleBytes-PersAutoDict-PersAutoDict-ChangeBinInt-CopyPart-ChangeBinInt-CrossOver-ChangeBit-ChangeBinInt-CopyPart-ChangeByte-ChangeBit-CopyPart-CrossOver-ChangeByte-ChangeBit-ChangeByte-ShuffleBytes-CMP-ChangeBit-CopyPart-ChangeBit-ChangeByte-ChangeBinInt-PersAutoDict-ChangeBinInt-CrossOver-ChangeBinInt-ChangeBit-ChangeBinInt-ChangeBinInt-PersAutoDict-ChangeBinInt-ChangeBinInt-ChangeByte-CopyPart-ShuffleBytes-ChangeByte-ChangeBit-ChangeByte-ChangeByte-EraseBytes-CrossOver-ChangeByte-ChangeByte-EraseBytes-EraseBytes-InsertRepeatedBytes-ShuffleBytes-CopyPart-CopyPart-ChangeBit-ShuffleBytes-PersAutoDict-ShuffleBytes-ChangeBit-ChangeByte-ChangeBit-ShuffleBytes-ChangeByte-ChangeBinInt-CrossOver-ChangeBinInt-ChangeBit-EraseBytes-CopyPart-ChangeByte-CrossOver-EraseBytes-CrossOver-ChangeByte-ShuffleBytes-ChangeByte-ChangeBinInt-CrossOver-ChangeByte-InsertRepeatedBytes-InsertByte-ShuffleBytes-PersAutoDict-ChangeBit-ChangeByte-ChangeBit-ShuffleBytes-ShuffleBytes-CopyPart-ShuffleBytes-EraseBytes-ShuffleBytes-ShuffleBytes-CrossOver-ChangeBinInt-CopyPart-CopyPart-CopyPart-EraseBytes-EraseBytes-ChangeByte-ChangeBinInt-ShuffleBytes-CMP-InsertByte-EraseBytes-ShuffleBytes-CopyPart-ChangeBit-CrossOver-CopyPart-CopyPart-ShuffleBytes-ChangeByte-ChangeByte-ChangeBinInt-EraseBytes-ChangeByte-ChangeBinInt-ChangeBit-ChangeBit-ChangeByte-ShuffleBytes-PersAutoDict-PersAutoDict-CMP-ChangeBit-ShuffleBytes-PersAutoDict-ChangeBinInt-EraseBytes-EraseBytes-ShuffleBytes-ChangeByte-ShuffleBytes-ChangeBit-EraseBytes-CMP-ShuffleBytes-ChangeByte-ChangeBinInt-EraseBytes-ChangeBinInt-ChangeByte-EraseBytes-ChangeByte-CrossOver-ShuffleBytes-EraseBytes-EraseBytes-ShuffleBytes-ChangeBit-EraseBytes-CopyPart-ShuffleBytes-ShuffleBytes-CrossOver-CopyPart-ChangeBinInt-ShuffleBytes-CrossOver-InsertByte-InsertByte-ChangeBinInt-ChangeBinInt-CopyPart-EraseBytes-ShuffleBytes-ChangeBit-ChangeBit-EraseBytes-ChangeByte-ChangeByte-ChangeBinInt-CrossOver-ChangeBinInt-ChangeBinInt-ShuffleBytes-ShuffleBytes-ChangeByte-ChangeByte-ChangeBinInt-ShuffleBytes-CrossOver-EraseBytes-CopyPart-CopyPart-CopyPart-ChangeBit-ShuffleBytes-ChangeByte-EraseBytes-ChangeByte-InsertRepeatedBytes-InsertByte-InsertRepeatedBytes-PersAutoDict-EraseBytes-ShuffleBytes-ChangeByte-ShuffleBytes-ChangeBinInt-ShuffleBytes-ChangeBinInt-ChangeBit-CrossOver-CrossOver-ShuffleBytes-CrossOver-CopyPart-CrossOver-CrossOver-CopyPart-ChangeByte-ChangeByte-CrossOver-ChangeBit-ChangeBinInt-EraseBytes-ShuffleBytes-EraseBytes-CMP-PersAutoDict-PersAutoDict-InsertByte-ChangeBit-ChangeByte-CopyPart-CrossOver-ChangeByte-ChangeBit-ChangeByte-CopyPart-ChangeBinInt-EraseBytes-CrossOver-ChangeBit-CrossOver-PersAutoDict-CrossOver-ChangeByte-CrossOver-ChangeByte-ChangeByte-CrossOver-ShuffleBytes-CopyPart-CopyPart-ShuffleBytes-ChangeByte-ChangeByte-ChangeBinInt-ChangeBinInt-ChangeBinInt-ChangeBinInt-ShuffleBytes-CrossOver-ChangeBinInt-ShuffleBytes-ChangeBit-PersAutoDict-ChangeBinInt-ShuffleBytes-ChangeBinInt-ChangeByte-CrossOver-ChangeBit-CopyPart-ChangeBit-ChangeBit-CopyPart-ChangeByte-PersAutoDict-ChangeBit-ShuffleBytes-ChangeByte-ChangeBit-CrossOver-ChangeByte-CrossOver-ChangeByte-CrossOver-ChangeBit-ChangeByte-ChangeBinInt-PersAutoDict-CopyPart-ChangeBinInt-ChangeBit-CrossOver-ChangeBit-PersAutoDict-ShuffleBytes-EraseBytes-CrossOver-ChangeByte-ChangeBinInt-ShuffleBytes-ChangeBinInt-InsertRepeatedBytes-PersAutoDict-CrossOver-ChangeByte-Custom-PersAutoDict-CopyPart-CopyPart-ChangeBinInt-ShuffleBytes-ChangeBinInt-ChangeBit-ShuffleBytes-CrossOver-CMP-ChangeByte-CopyPart-ShuffleBytes-CopyPart-CopyPart-CrossOver-CrossOver-CrossOver-ShuffleBytes-ChangeByte-ChangeBinInt-ChangeBit-ChangeBit-ChangeBit-ChangeByte-EraseBytes-ChangeByte-ChangeBit-ChangeByte-ChangeByte-CopyPart-PersAutoDict-ChangeBinInt-PersAutoDict-PersAutoDict-PersAutoDict-CopyPart-CopyPart-CrossOver-ChangeByte-ChangeBinInt-ShuffleBytes-ChangeBit-CopyPart-EraseBytes-CopyPart-CopyPart-CrossOver-ChangeByte-EraseBytes-ShuffleBytes-ChangeByte-CopyPart-EraseBytes-CopyPart-CrossOver-ChangeBinInt-ChangeBinInt-InsertByte-ChangeBinInt-ChangeBit-ChangeByte-CopyPart-ChangeByte-EraseBytes-ChangeByte-ChangeBit-ChangeByte-ShuffleBytes-CopyPart-ChangeBinInt-EraseBytes-CrossOver-ChangeBit-ChangeBit-CrossOver-EraseBytes-ChangeBinInt-CopyPart-CopyPart-ChangeBinInt-ChangeBit-EraseBytes-InsertRepeatedBytes-EraseBytes-ChangeBit-CrossOver-CrossOver-EraseBytes-EraseBytes-ChangeByte-CopyPart-CopyPart-ShuffleBytes-ChangeByte-ChangeBit-ChangeByte-EraseBytes-ChangeBit-ChangeByte-ChangeByte-CrossOver-CopyPart-EraseBytes-ChangeByte-EraseBytes-ChangeByte-ShuffleBytes-ShuffleBytes-ChangeByte-CopyPart-ChangeByte-ChangeByte-ChangeBit-CopyPart-ChangeBit-ChangeBinInt-CopyPart-ShuffleBytes-ChangeBit-ChangeBinInt-ChangeBit-EraseBytes-CMP-CrossOver-CopyPart-ChangeBinInt-CrossOver-CrossOver-CopyPart-CrossOver-CrossOver-InsertByte-InsertByte-CopyPart-Custom- DE: "warn"-"\x00\x00\x00\x80"-"\xfe\xff\xff\xfb"-"\xff\xff"-"\x10\x00\x00\x00"-"\xfe\xff\xff\xff"-"\xff\xff\xff\xf6"-"U\x01\x00\x00\x00\x00\x00\x00"-"\xd9\xff\xff\xff"-"\xfe\xff\xff\xea"-"\xf0\xff\xff\xff"-"\xfc\xff\xff\xff"-"warn"-"\xff\xff\xff\xff"-"\xfe\xff\xff\xfb"-"\x00\x00\x00\x80"-"\xfe\xff\xff\xf1"-"\xfe\xff\xff\xea"-"\x00\x00\x00\x00\x00\x00\x012"-"\xe2\x00"-"\xfb\xff\xff\xff"-"\x00\x00\x00\x00"-"\xe9\xff\xff\xff"-"\xff\xff"-"\x00\x00\x00\x80"-"\x01\x00\x04\xc9"-"\xf0\xff\xff\xff"-"\xf9\xff\xff\xff"-"\xff\xff\xff\xff\xff\xff\xff\x12"-"\xe2\x00"-"\xfe\xff\xff\xff"-"\xfe\xff\xff\xea"-"\xff\xff\xff\xff"-"\xf4\xff\xff\xff"-"\xe9\xff\xff\xff"-"\xf1\xff\xff\xff"-
    #48    NEW    cov: 4502 ft: 9151 corp: 27/750Kb lim: 64000 exec/s: 2 rss: 458Mb L: 50772/50772 MS: 259 ChangeByte-ShuffleBytes-ChangeBinInt-ChangeByte-ChangeByte-ChangeByte-ChangeByte-ChangeBit-CopyPart-CrossOver-CopyPart-ChangeByte-CrossOver-CopyPart-ChangeBit-ChangeByte-EraseBytes-ChangeByte-CopyPart-CopyPart-CopyPart-ChangeBit-EraseBytes-ChangeBinInt-CrossOver-CopyPart-CrossOver-CopyPart-ChangeBit-ChangeByte-ChangeBit-InsertByte-CrossOver-InsertRepeatedBytes-InsertRepeatedBytes-InsertRepeatedBytes-ChangeBinInt-EraseBytes-InsertRepeatedBytes-InsertByte-ChangeBit-ShuffleBytes-ChangeBit-ChangeBit-CopyPart-ChangeBit-ChangeByte-CrossOver-ChangeBinInt-ChangeByte-CrossOver-CMP-ChangeByte-CrossOver-ChangeByte-ShuffleBytes-ShuffleBytes-ChangeByte-ChangeBinInt-CopyPart-EraseBytes-CrossOver-ChangeBit-ChangeBinInt-InsertByte-ChangeBit-CopyPart-ChangeBinInt-ChangeByte-CrossOver-ChangeBit-EraseBytes-CopyPart-ChangeBinInt-ChangeBit-ChangeBit-ChangeByte-CopyPart-ChangeBinInt-CrossOver-PersAutoDict-ChangeByte-ChangeBit-ChangeByte-ChangeBinInt-ChangeBinInt-EraseBytes-CopyPart-CopyPart-ChangeByte-ChangeByte-EraseBytes-PersAutoDict-CopyPart-ChangeByte-ChangeByte-EraseBytes-CrossOver-CopyPart-CopyPart-CopyPart-ChangeByte-ChangeBit-CMP-CopyPart-ChangeBinInt-ChangeBinInt-CrossOver-ChangeBit-ChangeBit-EraseBytes-ChangeByte-ShuffleBytes-ChangeBit-ChangeBinInt-CMP-InsertRepeatedBytes-CopyPart-Custom-ChangeByte-CrossOver-EraseBytes-ChangeBit-CopyPart-CrossOver-CMP-ShuffleBytes-EraseBytes-CrossOver-PersAutoDict-ChangeByte-CrossOver-CopyPart-CrossOver-CrossOver-ShuffleBytes-ChangeBinInt-CrossOver-ChangeBinInt-ShuffleBytes-PersAutoDict-ChangeByte-EraseBytes-ChangeBit-CrossOver-EraseBytes-CrossOver-ChangeBit-ChangeBinInt-EraseBytes-InsertByte-InsertRepeatedBytes-InsertByte-InsertByte-ChangeByte-ChangeBinInt-ChangeBit-CrossOver-ChangeByte-CrossOver-EraseBytes-ChangeByte-ShuffleBytes-ChangeBit-ChangeBit-ShuffleBytes-CopyPart-ChangeByte-PersAutoDict-ChangeBit-ChangeByte-InsertRepeatedBytes-CMP-CrossOver-ChangeByte-EraseBytes-ShuffleBytes-CrossOver-ShuffleBytes-ChangeBinInt-ChangeBinInt-CopyPart-PersAutoDict-ShuffleBytes-ChangeBit-CopyPart-ShuffleBytes-CopyPart-EraseBytes-ChangeByte-ChangeBit-ChangeBit-ChangeBinInt-ChangeByte-CopyPart-EraseBytes-ChangeBinInt-EraseBytes-EraseBytes-PersAutoDict-CMP-PersAutoDict-CrossOver-CrossOver-ChangeBit-CrossOver-PersAutoDict-CrossOver-CopyPart-ChangeByte-EraseBytes-ChangeByte-ShuffleBytes-ChangeByte-ChangeByte-CrossOver-ChangeBit-EraseBytes-ChangeByte-EraseBytes-ChangeBinInt-CrossOver-CrossOver-EraseBytes-ChangeBinInt-CrossOver-ChangeBit-ShuffleBytes-ChangeBit-ChangeByte-EraseBytes-ChangeBit-CrossOver-CrossOver-CrossOver-ChangeByte-ChangeBit-ShuffleBytes-ChangeBit-ChangeBit-EraseBytes-CrossOver-CrossOver-CopyPart-ShuffleBytes-ChangeByte-ChangeByte-CopyPart-CrossOver-CopyPart-CrossOver-CrossOver-EraseBytes-EraseBytes-ShuffleBytes-InsertRepeatedBytes-ChangeBit-CopyPart-Custom- DE: "\xfe\xff\xff\xfc"-"\x00\x00\x00\x00"-"F\x00"-"\xf3\xff\xff\xff"-"St9exception"-"_\x00\x00\x00"-"\xf6\xff\xff\xff"-"\xfe\xff\xff\xff"-"\x00\x00\x00\x00"-"p\x02\x00\x00\x00\x00\x00\x00"-"\xfe\xff\xff\xfb"-"\xff\xff"-"\xff\xff\xff\xff"-"\x01\x00\x00\x07"-"\xfe\xff\xff\xfe"-

These are prohibitively large and of limited value in the default case (when
someone is running the fuzzer, not debugging it), in my opinion.

Reviewed By: morehouse

Differential Revision: https://reviews.llvm.org/D86658
2020-09-01 11:14:36 -07:00
Dokyung Song 750369e2e8 [libFuzzer] Fix compilation error by including missing platform macro definitions.
Summary: This patch fixes sanitizer-windows build errors.

Reviewers: morehouse, hctim

Reviewed By: morehouse, hctim

Subscribers: #sanitizers

Tags: #sanitizers

Differential Revision: https://reviews.llvm.org/D83823
2020-07-14 22:26:50 +00:00
Matt Morehouse e2e38fca64 Entropic: Boosting LibFuzzer Performance
Summary:
This is collaboration between Marcel Boehme @ Monash, Australia and Valentin Manès plus Sang Kil Cha @ KAIST, South Korea.

We have made a few modifications to boost LibFuzzer performance by changing how weights are assigned to the seeds in the corpus. Essentially, seeds that reveal more "information" about globally rare features are assigned a higher weight. Our results on the Fuzzer Test Suite seem quite promising. In terms of bug finding, our Entropic patch usually finds the same errors much faster and in more runs. In terms of coverage, our version Entropic achieves the same coverage in less than half the time for the majority of subjects. For the lack of space, we shared more detailed performance results directly with @kcc. We'll publish the preprint with all the technical details as soon as it is accepted. Happy to share if you drop us an email.

There should be plenty of opportunities to optimise further. For instance, while Entropic achieves the same coverage in less than half the time, Entropic has a much lower #execs per second. We ran the perf-tool and found a few performance bottlenecks.

Thanks for open-sourcing LibFuzzer (and the entire LLVM Compiler Infrastructure)! This has been such a tremendous help to my research.

Patch By: Marcel Boehme

Reviewers: kcc, metzman, morehouse, Dor1s, vitalybuka

Reviewed By: kcc

Subscribers: dgg5503, Valentin, llvm-commits, kcc

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D73776
2020-05-19 10:28:57 -07:00
Max Moroz 076475713c [libFuzzer] Fix denominator in the "inputs have DFT" log line.
Summary:
The number of "inputs have the Data Flow Trace" cannot be greater than
the number of inputs touching the focus function. The existing message is rather
confusing as the same log would mention a greater total number of traces a few
lines above.

Reviewers: kcc, metzman

Subscribers: #sanitizers, llvm-commits

Tags: #sanitizers, #llvm

Differential Revision: https://reviews.llvm.org/D74779
2020-02-19 11:05:14 -08:00
Yuanfang Chen 4f3c3bbbf8 Reland "[NFC][libFuzzer] Prefix TempPath with string showing the work it is doing."
With fix (somehow one hunk is missed).
2020-02-10 18:23:39 -08:00
Yuanfang Chen b1c7623982 Revert "[NFC][libFuzzer] Prefix TempPath with string showing the work it is doing."
This reverts commit 8a29cb4421.

fuzzer-linux bot has failure because of this.
2020-02-10 18:06:17 -08:00
Yuanfang Chen 8a29cb4421 [NFC][libFuzzer] Prefix TempPath with string showing the work it is doing. 2020-02-10 16:45:10 -08:00
Jake Ehrlich e7bfce7863 [libFuzzer] Fix Alarm callback in fuchsia.
This patch adds an #if macro to skip the InFuzzingThread() comparison
for fuchsia, similar to what it is done for Windows and NetBSD.

In fuchsia, the alarm callback runs in a separate thread[0], making it fail
the comparison InFuzzingThread(), breaking the -timeout flag.

[0]:
https://github.com/llvm/llvm-project/blob/master/compiler-rt/lib/fuzzer/FuzzerUtilFuchsia.cpp#L323

Author: charco (aka Marco  Vanotti)
Differential Revision: https://reviews.llvm.org/D68166

llvm-svn: 374228
2019-10-09 21:01:50 +00:00
Matt Morehouse 1c8e05110c [libFuzzer] Remove lazy counters.
Summary: Lazy counters haven't improved performance for large fuzz targets.

Reviewers: kcc

Reviewed By: kcc

Subscribers: llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D67476

llvm-svn: 373403
2019-10-01 22:49:06 +00:00
Mitch Phillips d1e222e552 [libFuzzer] Dump trace and provide correct msg for overwritten input.
Summary:
Now crashes with a stacktrace and uses 'overwrites-const-input' as the error
message instead of 'out-of-memory'.

Reviewers: morehouse, Dor1s

Reviewed By: morehouse, Dor1s

Subscribers: #sanitizers, llvm-commits, metzman, Dor1s

Tags: #sanitizers, #llvm

Differential Revision: https://reviews.llvm.org/D68067

llvm-svn: 373130
2019-09-27 22:04:36 +00:00
Mitch Phillips da3cf61654 [libFuzzer] [NFC] Fix grammar error with "it's"
llvm-svn: 372937
2019-09-26 00:54:30 +00:00
Max Moroz 74cec618f3 [libFuzzer] Merge: print feature coverage number as well.
Summary:
feature coverage is a useful signal that is available during the merge
process, but was not printed previously.

Output example:

```
$ ./fuzzer -use_value_profile=1 -merge=1 new_corpus/ seed_corpus/
INFO: Seed: 1676551929
INFO: Loaded 1 modules   (2380 inline 8-bit counters): 2380 [0x90d180, 0x90dacc), 
INFO: Loaded 1 PC tables (2380 PCs): 2380 [0x684018,0x68d4d8), 
MERGE-OUTER: 180 files, 78 in the initial corpus
MERGE-OUTER: attempt 1
INFO: Seed: 1676574577
INFO: Loaded 1 modules   (2380 inline 8-bit counters): 2380 [0x90d180, 0x90dacc), 
INFO: Loaded 1 PC tables (2380 PCs): 2380 [0x684018,0x68d4d8), 
INFO: -max_len is not provided; libFuzzer will not generate inputs larger than 1048576 bytes
MERGE-INNER: using the control file '/tmp/libFuzzerTemp.111754.txt'
MERGE-INNER: 180 total files; 0 processed earlier; will process 180 files now
#1	pulse  cov: 134 ft: 330 exec/s: 0 rss: 37Mb
#2	pulse  cov: 142 ft: 462 exec/s: 0 rss: 38Mb
#4	pulse  cov: 152 ft: 651 exec/s: 0 rss: 38Mb
#8	pulse  cov: 152 ft: 943 exec/s: 0 rss: 38Mb
#16	pulse  cov: 520 ft: 2783 exec/s: 0 rss: 39Mb
#32	pulse  cov: 552 ft: 3280 exec/s: 0 rss: 41Mb
#64	pulse  cov: 576 ft: 3641 exec/s: 0 rss: 50Mb
#78	LOADED cov: 602 ft: 3936 exec/s: 0 rss: 88Mb
#128	pulse  cov: 611 ft: 3996 exec/s: 0 rss: 93Mb
#180	DONE   cov: 611 ft: 4016 exec/s: 0 rss: 155Mb
MERGE-OUTER: succesfull in 1 attempt(s)
MERGE-OUTER: the control file has 39741 bytes
MERGE-OUTER: consumed 0Mb (37Mb rss) to parse the control file
MERGE-OUTER: 9 new files with 80 new features added; 9 new coverage edges
```

Reviewers: hctim, morehouse

Reviewed By: morehouse

Subscribers: delcypher, #sanitizers, llvm-commits, kcc

Tags: #llvm, #sanitizers

Differential Revision: https://reviews.llvm.org/D66030

llvm-svn: 368617
2019-08-12 20:21:27 +00:00
Kostya Serebryany db88fc56b9 [libFuzzer] implement a better queue for the fork mode. Add an internal flag -stop_file to allow graceful shutdown of fuzzing. Enhance the logging in the fork mode
llvm-svn: 363470
2019-06-14 22:56:50 +00:00
Kostya Serebryany 060f4b48d5 [libFuzzer] when using data-flow-trace (DFT) only load the DFT for the files present in the corpus
llvm-svn: 361579
2019-05-24 00:43:52 +00:00
Kostya Serebryany 4c7353c53b [libFuzzer] code refactoring; NFC
llvm-svn: 360400
2019-05-10 01:34:26 +00:00
Matt Morehouse 3478494c1f [libFuzzer] Unpoison parameters before calling user callback.
Summary:
Fixes an MSan false positive when compiling with
-fsanitize=memory,fuzzer.

See https://github.com/google/oss-fuzz/issues/2369 for more details.

Reviewers: kcc

Reviewed By: kcc

Subscribers: llvm-commits, metzman, eugenis

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D61753

llvm-svn: 360390
2019-05-09 22:48:46 +00:00
Kostya Serebryany e9aaa5582f [libFuzzer] implement -focus_function=auto, to be used with Data Flow Traces
llvm-svn: 360378
2019-05-09 21:29:45 +00:00
Matt Morehouse 1b76063a5e [libFuzzer] Disable MSan interceptors in SIGINT handler.
Summary:
Avoids an MSan false positive if the SIGINT comes while the user
callback is running.  The false positive happens when the interrupt
handler calls opendir() to remove some temporary files, which is
intercepted by MSan.

Fixes https://github.com/google/oss-fuzz/issues/2332.

Reviewers: kcc

Reviewed By: kcc

Subscribers: llvm-commits, Dor1s, metzman

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D61163

llvm-svn: 359254
2019-04-26 00:17:41 +00:00
Kostya Serebryany 5e67abd91f [libFuzzer] speedup the merge step in the fork mode by merging only the files that have unique features.
llvm-svn: 358320
2019-04-13 01:57:33 +00:00
Kostya Serebryany 4614cc3dfd [libFuzzer] add -features_dir= flag to dump unique input features on disk
llvm-svn: 358317
2019-04-13 00:20:31 +00:00
Max Moroz 9d5e7ee296 [libFuzzer] Fallback to default Mutate when MutateWithMask fails.
Summary:
In case the current corpus input doesn't have bytes going into the
focus function, MutateWithMask is useless and may fail gently, allowing the
default mutation routine happen, rather than crashing on an assertion.

For more context and the initial fix suggestion, see:
https://github.com/google/oss-fuzz/issues/1632#issuecomment-481862879

Reviewers: kcc, morehouse

Reviewed By: kcc

Subscribers: delcypher, #sanitizers, llvm-commits

Tags: #llvm, #sanitizers

Differential Revision: https://reviews.llvm.org/D60567

llvm-svn: 358190
2019-04-11 16:24:53 +00:00
Kostya Serebryany b6ca1e7259 [libFuzzer] make len_control less agressive: set the initial max len to the length of the largest seed. This was the original intent, but... Now, with a test, to ensure it stays this way
llvm-svn: 354191
2019-02-16 01:23:41 +00:00
Kostya Serebryany 312af158b0 [libFuzzer] fork mode: try harder to cleanup after itself
llvm-svn: 354186
2019-02-16 00:14:16 +00:00
Kostya Serebryany 96f81bc679 [libFuzzer] when doing the merge, keep track of the coveraged edges, not just features
llvm-svn: 354076
2019-02-14 23:12:33 +00:00
Kostya Serebryany 63f48717b5 [libFuzzer] extend the -fork=1 functionality. Still not fully usable, but good enough for the first unit test
llvm-svn: 353775
2019-02-12 00:12:33 +00:00
Kostya Serebryany 0fda9dcbe9 [libFuzzer] more refactoring; change some of the exit codes (timeout, OOM, interrupt) so that the parent process can distinguish those
llvm-svn: 353584
2019-02-09 00:16:21 +00:00
Kostya Serebryany f762a11544 [libFuzzer] introduce an experimental mode -fork=1, where fuzzing happens in a subprocess (still running multiple inputs per process), thus making the fuzzing more resilient to timeouts and OOMs. This is just a skeleton of the code, and some associated refactoring, not a fully working feature yet.
llvm-svn: 353570
2019-02-08 21:27:23 +00:00
Kostya Serebryany 0719b3527f [libFuzzer] refactor the way we choose the element to cross-over with, NFC (expected1); add a flag -seed_inputs= to pass extra seed inputs as file paths, not dirs
llvm-svn: 353494
2019-02-08 01:20:54 +00:00
Kostya Serebryany 23482e1d07 [libFuzzer] set libFuzzer's own SEGV handler even one is already present, but call that handler from ours (unless we are unprotecting lazy counters). Call ProtectLazyCounters later, so that it runs after the initialization code in the target.
llvm-svn: 352713
2019-01-31 01:40:14 +00:00
Julian Lettner 15df273eb4 [libFuzzer] Set default sanitizer options in fuzzer tests
Summary:
Set default `ASAN_OPTIONS` when running libFuzzer tests. This allows us
to remove special casing in code for Darwin where we usually pass
`abort_on_error=0` to override platform defaults for tests.

A previous commit changed the code to make the tests pass:
7764a04af0

Adapted a few tests to use `%env_asan_opts=` instead of directly setting
the environment variable.

rdar://problem/47515276

Reviewers: kcc, george.karpenkov

Differential Revision: https://reviews.llvm.org/D57465

llvm-svn: 352711
2019-01-31 01:24:01 +00:00
Kostya Serebryany 8da9479e40 [libFuzzer] experimental performance optimization -lazy_counters, off by default. Posix-only for now, tested on Linux
llvm-svn: 352700
2019-01-31 00:09:43 +00:00
Kostya Serebryany 5c0751ec3e [libFuzzer] remove stale code, NFC
llvm-svn: 352604
2019-01-30 06:21:20 +00:00
Kostya Serebryany 2891b257c2 [libFuzzer] remove stale code
llvm-svn: 352571
2019-01-29 23:53:28 +00:00
Chandler Carruth 2946cd7010 Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636
2019-01-19 08:50:56 +00:00
Jonathan Metzman b795c31dff [libFuzzer][MSVC] Make attribute-use compatible with MSVC
Summary:
Replace attributes with macros that use equivalent declspecs
for MSVC.

Reviewers: vitalybuka

Reviewed By: vitalybuka

Differential Revision: https://reviews.llvm.org/D56512

llvm-svn: 351456
2019-01-17 16:36:05 +00:00
Jonathan Metzman 9e14cccf6f [libFuzzer] Remove unstable edge handling
Summary:
Remove code for handling unstable edges from libFuzzer since
it has not been found useful.

Differential Revision: https://reviews.llvm.org/D56730

llvm-svn: 351262
2019-01-15 22:12:51 +00:00
Kamil Rytarowski 2e61186c42 Follow Windows' approach for NetBSD in AlarmCallback()
NetBSD's current behavior needs to ignore check for
InFuzzingThread() in Fuzzer::AlarmCallback().

llvm-svn: 346194
2018-11-06 01:28:01 +00:00