r360876 didn't fix 2 call sites in clang.
Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
Follow-up of D61781.
llvm-svn: 360892
It broke the Clang build, see llvm-commits thread.
> Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
>
> Follow-up of D61781.
llvm-svn: 360878
Summary:
It currently receives an output parameter and returns
std::error_code. Expected<StringRef> fits for this purpose perfectly.
Differential Revision: https://reviews.llvm.org/D61421
llvm-svn: 359774
For well-known type IDs, include the name of the type.
To not duplicate the ID->name map, make llvm-readobj call this new
function as well. It has slightly different output, so this also
requires updating a few tests.
Differential Revision: https://reviews.llvm.org/D61086
llvm-svn: 359153
When type streams with forward references were merged using GHashes, cycles
were introduced in the debug info. This was caused by
GlobalTypeTableBuilder::insertRecordAs() not inserting the record on the second
pass, thus yielding an empty ArrayRef at that record slot. Later on, upon PDB
emission, TpiStreamBuilder::commit() would skip that empty record, thus
offseting all indices that came after in the stream.
This solution comes in two steps:
1. Fix the hash calculation, by doing a multiple-step resolution, iff there are
forward references in the input stream.
2. Fix merge by resolving with multiple passes, therefore moving records with
forward references at the end of the stream.
This patch also adds support for llvm-readoj --codeview-ghash.
Finally, fix dumpCodeViewMergedTypes() which previously could reference deleted
memory.
Fixes PR40221
Differential Revision: https://reviews.llvm.org/D57790
llvm-svn: 353412
In r287786, a bug was introduced into llvm-readelf where it didn't print
the static symbol table if both --symbols and --dyn-symbols were
specified, even if there was no dynamic symbol table. This is obviously
incorrect.
This patch fixes this issue, by delegating the decision of which symbol
tables should be printed to the final dumper, rather than trying to
decide in the command-line option handling layer. The decision was made
to follow the approach taken in this patch because the LLVM style dumper
uses a different order to the original GNU style behaviour (and GNU
readelf) for ELF output. Other approaches resulted in behaviour changes
for other dumpers which felt wrong. In particular, I wanted to avoid
changing the order of the output for --symbols --dyn-symbols for LLVM
style, keep what is emitted by --symbols unchanged for all dumpers, and
avoid having different orders of .dynsym and .symtab dumping for GNU
"--symbols" and "--symbols --dyn-symbols".
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D57016
llvm-svn: 351960
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
There can be multiple local symbols with the same name (for e.g.
comdat sections), and thus the symbol name itself isn't enough
to disambiguate symbols.
Differential Revision: https://reviews.llvm.org/D56140
llvm-svn: 350288
Summary:
This change adds a bunch of options that GNU readelf supports. There is one breaking change when invoked as `llvm-readobj`, and three breaking changes when invoked as `llvm-readelf`:
- Add --all (implies --file-header, --program-headers, etc.)
- [Breaking] -a is --all instead of --arm-attributes
- Add --file-header as an alias for --file-headers
- Replace --sections with --sections-headers, keeping --sections as an alias for it
- Add --relocs as an alias for --relocations
- Add --dynamic as an alias for --dynamic-table
- Add --segments as an alias for --program-headers
- Add --section-groups as an alias for --elf-section-groups
- Add --dyn-syms as an alias for --dyn-symbols
- Add --syms as an alias for --symbols
- Add --histogram as an alias for --elf-hash-histogram
- [Breaking] When invoked as `llvm-readelf`, -s is --symbols instead of --sections
- [Breaking] When invoked as `llvm-readelf`, -t is no longer an alias for --symbols
Reviewers: MaskRay, phosek, mcgrathr, jhenderson
Reviewed By: MaskRay, jhenderson
Subscribers: sbc100, aheejin, edd, jhenderson, silvas, echristo, compnerd, kristina, javed.absar, kristof.beyls, llvm-commits, Bigcheese
Differential Revision: https://reviews.llvm.org/D54124
llvm-svn: 346685
This change allows for link-time merging of debugging information from
Microsoft precompiled types OBJs compiled with cl.exe /Z7 /Yc and /Yu.
This fixes llvm.org/PR34278
Differential Revision: https://reviews.llvm.org/D45213
llvm-svn: 346154
This patch adds support for dumping the unwind info from ARM64 COFF object
files.
Differential Revision: https://reviews.llvm.org/D53264
llvm-svn: 345108
Summary:
There are two registers encoded in the S_FRAMEPROC flags: one for locals
and one for parameters. The encoding is described by the
ExpandEncodedBasePointerReg function in cvinfo.h. Two bits are used to
indicate one of four possible values:
0: no register - Used when there are no variables.
1: SP / standard - Variables are stored relative to the standard SP
for the ISA.
2: FP - Variables are addressed relative to the ISA frame
pointer, i.e. EBP on x86. If realignment is required, parameters
use this. If a dynamic alloca is used, locals will be EBP relative.
3: Alternative - Variables are stored relative to some alternative
third callee-saved register. This is required to address highly
aligned locals when there are dynamic stack adjustments. In this
case, both the incoming SP saved in the standard FP and the current
SP are at some dynamic offset from the locals. LLVM uses ESI in
this case, MSVC uses EBX.
Most of the changes in this patch are to pass around the CPU so that we
can decode these into real, named architectural registers.
Subscribers: hiraditya
Differential Revision: https://reviews.llvm.org/D51894
llvm-svn: 341999
The format is the same as in ELF: a sequence of ULEB128-encoded
symbol indexes.
Differential Revision: https://reviews.llvm.org/D51047
llvm-svn: 340499
Helpers are available to make this option file format independant. This
patch adds the feature for Wasm file format. It doesn't change the
behavior of the other file format handling.
Differential Revision: https://reviews.llvm.org/D49545
llvm-svn: 337896
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
These appear in a .debug$P section, which is exactly the same in
format as a .debug$T section. So we shouldn't ignore these when
dumping types.
llvm-svn: 329326
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: JDevlieghere, zturner, echristo, dberris, friss
Reviewed By: echristo
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D45141
llvm-svn: 328943
Summary:
This protects calls to longjmp from transferring control to arbitrary
program points. Instead, longjmp calls are limited to the set of
registered setjmp return addresses.
This also implements /guard:nolongjmp to allow users to link in object
files that call setjmp that weren't compiled with /guard:cf. In this
case, the linker will approximate the set of address taken functions,
but it will leave longjmp unprotected.
I used the following program to test, compiling it with different -guard
flags:
$ cl -c t.c -guard:cf
$ lld-link t.obj -guard:cf
#include <setjmp.h>
#include <stdio.h>
jmp_buf buf;
void g() {
printf("before longjmp\n");
fflush(stdout);
longjmp(buf, 1);
}
void f() {
if (setjmp(buf)) {
printf("setjmp returned non-zero\n");
return;
}
g();
}
int main() {
f();
printf("hello world\n");
}
In particular, the program aborts when the code is compiled *without*
-guard:cf and linked with -guard:cf. That indicates that longjmps are
protected.
Reviewers: ruiu, inglorion, amccarth
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43217
llvm-svn: 325047
There were a few places where outs() was being used
directly rather than the ScopedPrinter object.
Differential Revision: https://reviews.llvm.org/D41370
llvm-svn: 322141
A couple of places in LLD were passing references to
TypeTableCollections around, which makes it hard to change the
implementation at runtime. However, these cases only needed to
iterate over the types in the collection, and TypeCollection
already provides a handy abstract interface for this purpose.
By implementing this interface, we can get rid of the need to
pass TypeTableBuilder references around, which should allow us
to swap the implementation at runtime in subsequent patches.
llvm-svn: 319345
Summary:
Instead of wiring these through the CVTypeVisitor interface, clients
should inspect the CVTypeArray before visiting it and potentially load
up the type server's TPI stream if they need it.
No tests relied on this functionality because LLD was the only client.
Reviewers: ruiu
Subscribers: mgorny, hiraditya, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35394
llvm-svn: 308212
We would return an error in getVaPtr if the RVA table being dumped was
the last data in the .rdata section. Avoid the issue by subtracting one
from the offset and adding it back to get an open interval again.
llvm-svn: 306171
This includes the safe SEH tables and the control flow guard function
table. LLD will emit the guard table soon, and I need a tool that dumps
them for testing.
llvm-svn: 305979
Merge the functionality into the random access type collection.
This class was only being used in 2 places, so getting rid of it
simplifies the code.
llvm-svn: 305653
Fangrui Song