TLS access requires an offset from the TLS index. The index itself is the
section-relative distance of the symbol. For ARM, the relevant relocation
(IMAGE_REL_ARM_SECREL) is applied as a constant. This means that the value may
not be an immediate and must be lowered into a constant pool. This offset will
not be base relocated. We were previously emitting the actual address of the
symbol which would be base relocated and would therefore be the vaue offset by
the ImageBase + TLS Offset.
llvm-svn: 271974
It seems that cl will emit the export directives for Windows ARM targets. The
fact that it did this had originally been missed and this functionality was
never implemented. This makes it possible to rely solely on the source code for
indicating what the exported interfaces are and brings us more compatibility
with cl.
llvm-svn: 269574
This corrects the MI annotations for the stack adjustment following the __chkstk
invocation. We were marking the original SP usage as a Def rather than Kill.
The (new) assigned value is the definition, the original reference is killed.
Adjust the ISelLowering to mark Kills and FrameSetup as well.
This partially resolves PR27480.
llvm-svn: 267361
Rather than checking both stdout and stderr simultaneously, split it into two
tests. This apparently breaks on Windows where MSVCRT does not buffer output
correctly. NFC.
Thanks to chapuni for bringing the issue to my attention!
llvm-svn: 267179
WIN__DBZCHK will insert a CBZ instruction into the stream. This instruction
reserves 3 bits for the condition register (rn). As such, we must ensure that
we restrict the register to a low register. Use the tGPR class instead of GPR
to ensure that this is properly constrained. In debug builds, we would attempt
to use lr as a condition register which would silently get truncated with no
hint that the register selection was incorrect.
llvm-svn: 267080
It is possible to have a fallthrough MBB prior to MBB placement. The original
addition of the BB would result in reordering the BB as not preceding the
successor. Because of the fallthrough nature of the BB, we could end up
executing incorrect code or even a constant pool island! Insert the spliced BB
into the same location to avoid that.
Thanks to Tim Northover for invaluable hints and Fiora for the discussion on
what may have been occurring!
llvm-svn: 264454
We did not have an explicit branch to the continuation BB. When the check was
hoisted, this could permit control follow to fall through into the division
trap. Add the explicit branch to the continuation basic block to ensure that
code execution is correct.
llvm-svn: 264370
The two changes together weakened the test and caused a regression with division
handling in MSVC mode. They were applied to avoid an assertion being triggered
in the block frequency analysis. However, the underlying problem was simply
being masked rather than solved properly. Address the actual underlying problem
and revert the changes. Rather than analyze the cause of the assertion, the
division failure was assumed to be an overflow.
The underlying issue was a subtle bug in the BB construction in the emission of
the div-by-zero check (WIN__DBZCHK). We did not construct the proper successor
information in the basic blocks, nor did we update the PHIs associated with the
basic block when we split them. This would result in assertions being triggered
in the block frequency analysis pass.
Although the original tests are being removed, the tests themselves performed
very little in terms of validation but merely tested that we did not assert when
generating code. Update this with new tests that actually ensure that we do not
regress on the code generation.
llvm-svn: 263714
The initial change was insufficiently complete for always getting the semantics
of __builtin_longjmp correct. The builtin is translated into a
`tInt_eh_sjlj_longjmp` DAG node. This node set R7 as clobbered. However, the
code would then follow up with a clobber of R11. I had failed to notice the
imp-def,kill on R7 in the isel. Unfortunately, it seems that it is not possible
to conditionalise the Defs list via an !if. Instead, construct a new parallel
WIN node and prefer that when targeting windows. This ensures that we now both
correctly model the __builtin_longjmp as well as construct the frame in a more
ABI conformant manner.
llvm-svn: 263123
WoA uses r11 as the FP even though it is a pure thumb-2 environment in contrast
to AAPCS which states r7. This adjusts __builtin_longjmp to not clobber r7 and
to properly restore the frame pointer on execution.
llvm-svn: 263118
Add support for TLS access for Windows on ARM. This generates a similar access
to MSVC for ARM.
The changes to the tablegen data is needed to support loading an external symbol
global that is not for a call. The adjustments to the DAG to DAG transforms are
needed to preserve the 32-bit move.
llvm-svn: 259676
For historic reasons, the behavior of .align differs between targets.
Fortunately, there are alternatives, .p2align and .balign, which make the
interpretation of the parameter explicit, and which behave consistently across
targets.
This patch teaches MC to use .p2align instead of .align, so that people reading
code for multiple architectures don't have to remember which way each platform
does its .align directive.
Differential Revision: http://reviews.llvm.org/D16549
llvm-svn: 258750
EABI attributes should only be emitted on EABI targets. This prevents the
emission of the optimization goals EABI attribute on Windows ARM.
llvm-svn: 255448
Building on r253865 the crash is not limited to signed overflows.
Disable custom handling of unsigned 32-bit and 64-bit integer divide.
Add test cases for both 32-bit and 64-bit unsigned integer overflow.
llvm-svn: 254158
Disable custom handling of signed 32-bit and 64-bit integer divide.
Add test cases for both 32-bit and 64-bit integer overflow crashes.
llvm-svn: 253865
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
Accept r11 when targeting Windows on ARM rather than just low registers.
Because we are in a thumb-2 only mode, this may be slightly more expensive in
code size, but results in better code for the environment since it spills the
frame register, which is generally desired for fast stack walking as per the
ABI.
llvm-svn: 249804
We now emit the compiler generated divide by zero check that was needed for the
MSVC routines. We construct a psuedo-instruction for the DBZ check as the
operation requires splitting up the BB. For the 64-bit operations, we need to
custom expand the node as we need to insert the DBZ check and then emit the
libcall to the appropriate name. Because this is target specific, it seemed
better to reproduce the expansion operation from the target-agnostic type
legalization rather than sink this there to avoid the duplication. The division
library calls now match MSVC semantically.
llvm-svn: 248561
This adds the software division routines for the Windows RTABI. These are not
expected to be used often though as most modern Windows ARM capable targets
support hardware division. In the case that the target CPU doesnt support
hardware division, this will be the fallback.
llvm-svn: 243952
The ones committed were orthogonal to the change and would have passed before
that revision. What it *did* do was prevent an assertion failure when
generating object files.
llvm-svn: 242166
be emitted.
This is needed to enable ARM long calls for LTO and enable and disable it on a
per-function basis.
Out-of-tree projects currently using EnableARMLongCalls to emit long calls
should start passing "+long-calls" to the feature string (see the changes made
to clang in r241565).
rdar://problem/21529937
Differential Revision: http://reviews.llvm.org/D9364
llvm-svn: 241566
COFF COMDATs (for selection kinds other than 'select any') require at
least one non-section symbol in the symbol table.
Satisfy this by morally enhancing the linkage from private to internal.
Differential Revision: http://reviews.llvm.org/D8394
llvm-svn: 232570
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
COFF section flags are not idempotent:
'rd' will make a read-write section because 'd' implies write
'dr' will make a read-only section because 'r' disables write
llvm-svn: 228490
Now that -mstack-probe-size is piped through to the backend via the function
attribute as on Windows x86, honour the value to permit handling of non-default
values for stack probes. This is needed /Gs with the clang-cl driver or
-mstack-probe-size with the clang driver when targeting Windows on ARM.
llvm-svn: 227667
When performing a dynamic stack adjustment without optimisations, we would mark
SP as def and R4 as kill. This occurred as part of the expansion of a
WIN__CHKSTK SDNode which indicated the proper handling of SP and R4. The result
would be that we would double define SP as part of an operation, which is
obviously incorrect.
Furthermore, the VTList for the chain had an incorrect parameter type of i32
instead of Other.
Correct these to permit proper lowering of __builtin_alloca at -O0.
llvm-svn: 213442
This completes the handling for DLL import storage symbols when lowering
instructions. A DLL import storage symbol must have an additional load
performed prior to use. This is applicable to variables and functions.
This is particularly important for non-function symbols as it is possible to
handle function references by emitting a thunk which performs the translation
from the unprefixed __imp_ symbol to the proper symbol (although, this is a
non-optimal lowering). For a variable symbol, no such thunk can be
accommodated.
llvm-svn: 212431
Windows on ARM uses COFF/PE which is intrinsically position independent. For
the case of 32-bit immediates, use a pair-wise relocation as otherwise we may
exceed the range of operators. This fixes a code generation crash when using
-Oz when targeting Windows on ARM.
llvm-svn: 210814
The armv7-windows-itanium environment is nearly identical to the MSVC ABI. It
has a few divergences, mostly revolving around the use of the Itanium ABI for
C++. VLA support is one of the extensions that are amongst the set of the
extensions.
This adds support for proper VLA emission for this environment. This is
somewhat similar to the handling for __chkstk emission on X86 and the large
stack frame emission for ARM. The invocation style for chkstk is still
controlled via the -mcmodel flag to clang.
Make an explicit note that this is an extension.
llvm-svn: 210489
COFF/PE, so the relocation model is never static. Loosen the assertion
accordingly. The relocation can still be emitted properly, as it will be
converted to an IMAGE_REL_ARM_ADDR32 which will be resolved by the loader
taking the base relocation into account. This is necessary to permit the
emission of long calls which can be controlled via the -mlong-calls option in
the driver.
llvm-svn: 210399
Although the previous code would construct a bundle and add the correct elements
to it, it would not finalise the bundle. This resulted in the InternalRead
markers not being added to the MachineOperands nor, more importantly, the
externally visible defs to the bundle itself. So, although the bundle was not
exposing the def, the generated code would be correct because there was no
optimisations being performed. When optimisations were enabled, the post
register allocator would kick in, and the hazard recognizer would reorder
operations around the load which would define the value being operated upon.
Rather than manually constructing the bundle, simply construct and finalise the
bundle via the finaliseBundle call after both MIs have been emitted. This
improves the code generation with optimisations where IMAGE_REL_ARM_MOV32T
relocations are emitted.
The changes to the other tests are the result of the bundle generation
preventing the scheduler from hoisting the moves across the loads. The net
effect of the generated code is equivalent, but, is much more identical to what
is actually being lowered.
llvm-svn: 209267
Windows on ARM uses R11 for the frame pointer even though the environment is a
pure Thumb-2, thumb-only environment. Replicate this behaviour to improve
Windows ABI compatibility. This register is used for fast stack walking, and
thus is part of the Windows ABI.
llvm-svn: 209085
WoA uses COFF, not ELF. ARMISelLowering::createTLOF would previously return ELF
for any non-MachO platform. This was a missed site when the original change for
target format support for Windows on ARM was done.
llvm-svn: 209057
Add some Windows on ARM specific library calls. These are provided by msvcrt,
and can be used to perform integer to floating-point conversions (and
vice-versa) mirroring similar functions in the RTABI.
llvm-svn: 208949
Handle lowering of global addresses for PIC mode compilation on Windows. Always
use the movw/movt load to load the address as Windows on ARM requires ARMv7+ and
is a pure Thumb environment.
llvm-svn: 208385
The ARM::BLX instruction is an ARM mode instruction. The Windows on ARM target
is limited to Thumb instructions. Correctly use the thumb mode tBLXr
instruction. This would manifest as an errant write into the object file as the
instruction is 4-bytes in length rather than 2. The result would be a corrupted
object file that would eventually result in an executable that would crash at
runtime.
llvm-svn: 208152
Windows on ARM does not conform to AEABI. However, memset would be emitted
using the AEABI signature, resulting in inverted parameters. Handle this
special case appropriately.
llvm-svn: 207943
This introduces the stack lowering emission of the stack probe function for
Windows on ARM. The stack on Windows on ARM is a dynamically paged stack where
any page allocation which crosses a page boundary of the following guard page
will cause a page fault. This page fault must be handled by the kernel to
ensure that the page is faulted in. If this does not occur and a write access
any memory beyond that, the page fault will go unserviced, resulting in an
abnormal program termination.
The watermark for the stack probe appears to be at 4080 bytes (for
accommodating the stack guard canaries and stack alignment) when SSP is
enabled. Otherwise, the stack probe is emitted on the page size boundary of
4096 bytes.
llvm-svn: 207615
IMAGE_REL_ARM_MOV32T relocations require that the movw/movt pair-wise
relocation is not split up and reordered. When expanding the mov32imm
pseudo-instruction, create a bundle if the machine operand is referencing an
address. This helps ensure that the relocatable address load is not reordered
by subsequent passes.
Unfortunately, this only partially handles the case as the Constant Island Pass
occurs after the instructions are unbundled and does not properly handle
bundles. That is a more fundamental issue with the pass itself and beyond the
scope of this change.
llvm-svn: 207608
Saleem Abdulrasool