if the offset fits in 11 bits. This makes use of the fact that the abi
requires sp to be 8 byte aligned so the actual offset can fit in 8
bits. It will be shifted left and sign extended before being actually used.
The assembler or direct object emitter will shift right the 11 bit
signed field by 3 bits. We don't need to deal with that here.
llvm-svn: 175073
This happens when there is both stack realignment and a dynamic alloca in the
function. If we overwrite %esi (rep;movsl uses fixed registers) we'll lose the
base pointer and the next register spill will write into oblivion.
Fixes PR15249 and unbreaks firefox on i386/freebsd. Mozilla uses dynamic allocas
and freebsd a 4 byte stack alignment.
llvm-svn: 175057
RegisterCoalescer used to depend on LiveDebugVariable. LDV removes DBG_VALUEs
without emitting them at the end.
We fix this by removing LDV from RegisterCoalescer. Also add an assertion to
make sure we call emitDebugValues if DBG_VALUEs are removed at
runOnMachineFunction.
rdar://problem/13183203
Reviewed by Andy & Jakob
llvm-svn: 175023
This is complicated by backward labels (e.g., 0b can be both a backward label
and a binary zero). The current implementation assumes [0-9]b is always a
label and thus it's possible for 0b and 1b to not be interpreted correctly for
ms-style inline assembly. However, this is relatively simple to fix in the
inline assembly (i.e., drop the [bB]).
This patch also limits backward labels to [0-9]b, so that only 0b and 1b are
ambiguous.
Part of rdar://12470373
llvm-svn: 174983
DAGCombiner::ReduceLoadWidth was converting (trunc i32 (shl i64 v, 32))
into (shl i32 v, 32) into undef. To prevent this, check the shift count
against the final result size.
Patch by: Kevin Schoedel
Reviewed by: Nadav Rotem
llvm-svn: 174972
Vectors were being manually scalarized by the backend. Instead,
let the target-independent code do all of the work. The manual
scalarization was from a time before good target-independent support
for scalarization in LLVM. However, this forces us to specially-handle
vector loads and stores, which we can turn into PTX instructions that
produce/consume multiple operands.
llvm-svn: 174968
'R600/SI: Use proper instructions for array/shadow samplers.' removed two
cases from TEX_SHADOW. Vincent Lejeune reported on IRC that this broke some
shadow array piglit tests with the r600g driver. Reinstating the removed
cases should fix this, and still works with radeonsi as well.
I will follow up with some lit tests which would have caught the regression.
NOTE: This is a candidate for the Mesa stable branch.
Tested-by: Vincent Lejeune <vljn@ovi.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174963
This is based on Bill Wendling's email. No additional content has been added,
but now there's a place for Attributes to capture future information.
llvm-svn: 174961
The bitcode writer emits a reference to the attribute group that the object at
the given index refers to. The bitcode reader is modified to read this in and
map it back to the attribute group.
llvm-svn: 174952
live ranges should always be extended, and the only successor that should be
considered for extension of other ranges is the target of the split edge.
llvm-svn: 174935
Sorry for the lack of a test case. I tried writing one for i386 as i know selects are illegal on this target, but they are actually considered legal by isel and expanded later.
I can't see any targets to trigger this, but checking for the legality of a node before forming it is general goodness.
llvm-svn: 174934
Check for reverse shuffles in the CostModel analysis pass and query
TargetTransform info accordingly. This allows us we can write test cases for
reverse shuffles.
radar://13171406
llvm-svn: 174932
Lower reverse shuffles to a vrev64 and a vext instruction instead of the default
legalization of storing and loading to the stack. This is important because we
generate reverse shuffles in the loop vectorizer when we reverse store to an
array.
uint8_t Arr[N];
for (i = 0; i < N; ++i)
Arr[N - i - 1] = ...
radar://13171760
llvm-svn: 174929
When building the pairable-instruction dependency map, don't search
past the last pairable instruction. For large blocks that have been
divided into multiple instruction groups, searching past the last
instruction in each group is very wasteful. This gives a 32% speedup
on the csa.ll test case from PR15222 (when using 50 instructions
in each group).
No functionality change intended.
llvm-svn: 174915
This map is queried only for instructions in pairs of pairable
instructions; so make sure that only pairs of pairable
instructions are added to the map. This gives a 3.5% speedup
on the csa.ll test case from PR15222.
No functionality change intended.
llvm-svn: 174914
MipsCodeEmitter.cpp.
JALR and NOP are expanded by function emitPseudoExpansionLowering, which is not
called when the old JIT is used.
This fixes the following tests which have been failing on
llvm-mips-linux builder:
LLVM :: ExecutionEngine__2003-01-04-LoopTest.ll
LLVM :: ExecutionEngine__2003-05-06-LivenessClobber.ll
LLVM :: ExecutionEngine__2003-06-04-bzip2-bug.ll
LLVM :: ExecutionEngine__2005-12-02-TailCallBug.ll
LLVM :: ExecutionEngine__2003-10-18-PHINode-ConstantExpr-CondCode-Failure.ll
LLVM :: ExecutionEngine__hello2.ll
LLVM :: ExecutionEngine__stubs.ll
LLVM :: ExecutionEngine__test-branch.ll
LLVM :: ExecutionEngine__test-call.ll
LLVM :: ExecutionEngine__test-common-symbols.ll
LLVM :: ExecutionEngine__test-loadstore.ll
LLVM :: ExecutionEngine__test-loop.ll
llvm-svn: 174912
This eliminates one more linear search over a range of
std::multimap entries. This gives a 22% speedup on the
csa.ll test case from PR15222.
No functionality change intended.
llvm-svn: 174893
The modifiers don't seem to have any effect with V_MOV_B32, supposedly it's
meant to just move bits untouched.
Fixes 46 piglit tests with radeonsi, though unfortunately 11 of those had
just regressed because they started using the clamp modifier.
NOTE: This is a candidate for the Mesa stable branch.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174890
This flag makes asan use a small (<2G) offset for 64-bit asan shadow mapping.
On x86_64 this saves us a register, thus achieving ~2/3 of the
zero-base-offset's benefits in both performance and code size.
Thanks Jakub Jelinek for the idea.
llvm-svn: 174886
This does two things:
It removes a call to abs() which may have "long long" parameter on Windows,
which is not necessarily available in C++03.
It also corrects the signedness of Amount, which was relying on
implementation-defined conversions previously.
Code was already tested (albeit in an implemnetation defined way) so no extra
tests.
llvm-svn: 174885
Previous code had a confusing comment which was mostly an implementation
detail. This condition corresponds to "lsb up to register width" and "width not
ridiculous".
llvm-svn: 174877
This gives a DiagnosticType to all AsmOperands in sight. This replaces all
"invalid operand" diagnostics with something more specific. The messages given
should still be sufficiently vague that they're not usually actively misleading
when LLVM guesses your instruction incorrectly.
llvm-svn: 174871
This is currently a bit hairier than it needs to be, since depending on where the
split block resides the end ListEntry of the split block may be the end ListEntry
of the original block or a new entry. Some changes to the SlotIndexes updating
should make it possible to eliminate the two cases here.
This also isn't as optimized as it could be. In the future Liveinterval should
probably get a flag that indicates whether the LiveInterval is within a single
basic block. We could ignore all such intervals when splitting an edge.
llvm-svn: 174870
This emits the attribute groups that are used by the functions. (It currently
doesn't print out return type or parameter attributes within attribute groups.)
Note: The functions still retrieve their attributes from the "old" bitcode
format (using the deprecated 'Raw()' method). This means that string attributes
within an attribute group will not show up during a disassembly. This will be
addressed in a future commit.
llvm-svn: 174867
This reverts my commit 171047. Now that I've removed my misguided attempt to
support backend warnings, these diagnostics are only about inline assembly.
It would take quite a bit more work to generalize them properly, so I'm
just reverting this.
llvm-svn: 174860
This removes the last of the linear searches over ranges of std::multimap
iterators, giving a 7% speedup on the doduc.bc input from PR15222.
No functionality change intended.
llvm-svn: 174859
Profiling suggests that getInstructionTypes is performance-sensitive,
this cleans up some double-casting in that function in favor of
using dyn_cast.
No functionality change intended.
llvm-svn: 174857
By itself, this does not have much of an effect, but only because in the default
configuration the full cycle checks are used only for small problem sizes.
This is part of a general cleanup of uses of iteration over std::multimap
ranges only for the purpose of checking membership.
No functionality change intended.
llvm-svn: 174856
function is successfully handled by fast-isel. That's because function
arguments are *always* handled by SDISel. Introduce FastLowerArguments to
allow each target to provide hook to handle formal argument lowering.
As a proof-of-concept, add ARMFastIsel::FastLowerArguments to handle
functions with 4 or fewer scalar integer (i8, i16, or i32) arguments. It
completely eliminates the need for SDISel for trivial functions.
rdar://13163905
llvm-svn: 174855
I have some uncommitted changes to the cast code that catch this sort of thing
at compile-time but I still need to do some other cleanup before I can enable
it.
llvm-svn: 174853
support for updating SlotIndexes to MachineBasicBlock::SplitCriticalEdge(). This
calls renumberIndexes() every time; it should be improved to only renumber
locally.
llvm-svn: 174851
This reads the attribute groups. It currently doesn't do anything with them.
NOTE: In the commit to the bitcode writer, the format *may* change in the near
future. Which means that this code would also change.
llvm-svn: 174849
This is some initial code for emitting the attribute groups into the bitcode.
NOTE: This format *may* change! Do not rely upon the attribute groups' bitcode
not changing.
llvm-svn: 174845
present, it currently verifies them with the MachineVerifier, and this passed
all of the test cases in 'make check' (when accounting for existing verifier
errors). There were some assertion failures in the two-address pass, but they
also happened on code without phis and look like they are caused by different
kill flags from LiveIntervals.
The only part that doesn't work is the critical edge splitting heuristic,
because there isn't currently an efficient way to update LiveIntervals after
splitting an edge. I'll probably start by implementing the slow fallback and
test that it works before tackling the fast path for single-block ranges. The
existing code that updates LiveVariables is fairly slow as it is.
There isn't a command-line option for enabling this; instead, just edit
PHIElimination.cpp to require LiveIntervals.
llvm-svn: 174831
The original syntax for the attribute groups was ambiguous. For example:
declare void @foo() #1#0 = attributes { noinline }
The '#0' would be parsed as an attribute reference for '@foo' and not as a
top-level entity. In order to continue forward while waiting for a decision on
what the correct syntax is, I'm changing it to this instead:
declare void @foo() #1
attributes #0 = { noinline }
Repeat: This is TEMPORARY until we decide what the correct syntax should be.
llvm-svn: 174813
bitcode writer would generate abbrev records saying that the abbrev should be
filled with fixed zero-bit bitfields (this happens in the .bc writer when
the number of types used in a module is exactly one, since log2(1) == 0).
In this case, just handle it as a literal zero. We can't "just fix" the writer
without breaking compatibility with existing bc files, so have the abbrev reader
do the substitution.
Strengthen the assert in read to reject reads of zero bits so we catch such
crimes in the future, and remove the special case designed to handle this.
llvm-svn: 174801
instead of always 32-bits at a time) with two changes:
1. Make Read(0) always return zero without affecting the state of our cursor.
2. Hack word_t to always be 32 bits, as staging.
These two caveats will change shortly.
llvm-svn: 174800
This uses a liveness algorithm that does not depend on data from the
LiveVariables analysis, it is the first step towards removing
LiveVariables completely.
llvm-svn: 174774
check_cxx_symbol_exists requires CMake 2.8.6, so even though I
recommended it to Owen it's probably better to stay away for now.
This check is not technically correct because we're checking <math.h>
but then using <cmath> in the actual code, but if we run into problems we
can do the same sort of dance as isinf() and isnan() where we check /both/
headers and then write a wrapper header around them.
llvm-svn: 174773
to use -Wfoo instead of -Wno-foo. This works around a bug in some versions of
gcc, where it will silently accept an unknown -Wno-foo option, but will
generate an error for a compile which uses -Wno-foo if that compile also
triggers any warnings.
llvm-svn: 174770
This fixes a couple of bugs and incorrect assumptions,
in total four more piglit tests now pass.
v2: fix small bug in the dominator updating
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
llvm-svn: 174762
Patch by: Christian König
Intersecting loop handling was wrong.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 174761
Otherwise we sometimes produce invalid code.
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 174760
This reverts r171041. This was a nice idea that didn't work out well.
Clang warnings need to be associated with warning groups so that they can
be selectively disabled, promoted to errors, etc. This simplistic patch didn't
allow for that. Enhancing it to provide some way for the backend to specify
a front-end warning type seems like overkill for the few uses of this, at
least for now.
llvm-svn: 174748
same so we put in the comment field an indicator when we think we are
emitting the 16 bit version. For the direct object emitter, the difference is
important as well as for other passes which need an accurate count of
program size. There will be other similar putbacks to this for various
instructions.
llvm-svn: 174747
Previously, even when a pre-increment load or store was generated,
we often needed to keep a copy of the original base register for use
with other offsets. If all of these offsets are constants (including
the offset which was combined into the addressing mode), then this is
clearly unnecessary. This change adjusts these other offsets to use the
new incremented address.
llvm-svn: 174746
This is a follow-up to the cost-model change in r174713 which splits
the cost of a memory operation between the address computation and the
actual memory access. In r174713, this cost is always added to the
memory operation cost, and so BBVectorize will do the same.
Currently, this new cost function is used only by ARM, and I don't
have any ARM test cases for BBVectorize. Assistance in generating some
good ARM test cases for BBVectorize would be greatly appreciated!
llvm-svn: 174743
Aside from the question of whether we report a warning or an error when we
can't satisfy a requested stack object alignment, the current implementation
of this is not good. We're not providing any source location in the diagnostics
and the current warning is not connected to any warning group so you can't
control it. We could improve the source location somewhat, but we can do a
much better job if this check is implemented in the front-end, so let's do that
instead. <rdar://problem/13127907>
llvm-svn: 174741
This updates the current references to links that work for me.
In the future, we should update the list of references itself to provide
information on newer architecture variants.
Thanks to Sean Silva for pointing out that the current links were broken!
llvm-svn: 174739
Thanks to help from Nadav and Hal, I have a more reasonable (and even
correct!) approach. This specifically penalizes the insertelement
and extractelement operations for the performance hit that will occur
on PowerPC processors.
llvm-svn: 174725
isn't using the default calling convention. However, if the transformation is
from a call to inline IR, then the calling convention doesn't matter.
rdar://13157990
llvm-svn: 174724
of lines which weren't being explicitly looked at and were printing incorrect results. These
values clearly must lie within 32 bits, so the casts are definitely safe.
llvm-svn: 174717
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
llvm-svn: 174713
Attribute references are of this form:
define void @foo() #0#1#2 { ... }
Parse them for function attributes. If there's more than one reference, then
they are merged together.
llvm-svn: 174697
allowed size for the instruction. This code uses RegScavenger to fix this.
We sometimes need 2 registers for Mips16 so we must handle things
differently than how register scavenger is normally used.
llvm-svn: 174696
Add #include <unistd.h> to OProfileWrapper.cpp. This provides the declarations for 'read' and 'close' that are otherwise missing, and result in 'error: <foo> was not declared in this scope'.
This matches the issue as reported in bug 15055 "Can no longer compile LLVM with --with-oprofile"
llvm-svn: 174661
Certain vector operations don't vectorize well with the current
PowerPC implementation. Element insert/extract performs poorly
without VSX support because Altivec requires going through memory.
SREM, UREM, and VSELECT all produce bad scalar code.
There's a lot of work to do for the cost model before
autovectorization will be tuned well, and this is not an attempt to
address the larger problem.
llvm-svn: 174660
Remove all the unused code.
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174656
Allows nexuiz to run with radeonsi.
Patch by: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174655
20 more little piglits with radeonsi.
Patch by: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174654
The _SGPR variants where wrong.
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174653
v2: rebased on current upstream
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174652
This is for the case when no processor is passed to the backend. This
prevents the
'' is not a recognized processor for this target (ignoring processor)
warning from being generated by clang.
llvm-svn: 174651
We don't want too many classes in a pass and the classes obscure the details. I
was going a little overboard with object modeling here. Replace classes by
generic code that handles both loads and stores.
No functionality change intended.
llvm-svn: 174646
PR15138 was opened because of a segfault in the Bitcode writer.
The actual issue ended up being a bug in APInt where calls to
APInt::getActiveWords returns a bogus value when the APInt value
is 0. This patch fixes the problem by ensuring that getActiveWords
returns 1 for 0 valued APInts.
llvm-svn: 174641
Handle vectors of 1 to 16 integers.
Change the intrinsic names to prevent the wrong one from being selected at
runtime due to the overloading.
Patch By: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174633
v1i32, v2i32, v8i32 and v16i32.
Only add VGPR register classes for integer vector types, to avoid attempts
copying from VGPR to SGPR registers, which is not possible.
Patch By: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174632
Use sub0-15 everywhere.
Patch by: Michel Dänzerr
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 174610
These instructions compare two floating point values and return an
integer true (-1) or false (0) value.
When compiling code generated by the Mesa GLSL frontend, the SET*_DX10
instructions save us four instructions for most branch decisions that
use floating-point comparisons.
llvm-svn: 174609
A double inclusion will pretty much always be an error in TableGen, so
there's no point going on just to die with "def already defined" or
whatnot.
I'm not too thrilled about the "public: ... private: ..." to expose the
DependenciesMapTy, but I really didn't see a better way to keep that
type centralized. It's a smell that indicates that some refactoring is
needed to make this code more loosely coupled.
This should avoid all bugs of the same nature as PR15189.
llvm-svn: 174582
1. Moved a comment from ObjCARCOpts.cpp -> ObjCARCContract.cpp.
2. Removed a comment from ObjCARCOpts.cpp that was already moved to
ObjCARCAliasAnalysis.h/.cpp.
llvm-svn: 174581
The test is a binary placed in test/DebugInfo/Inputs, with a source C
file used for reference/reproducing. The source's first line is a clang
build command for reproducing the binary.
llvm-svn: 174543
account. Atoms use LEA for updating SP in prologs/epilogs, and the
exact LEA opcode depends on the data model.
Also reapplying the test case which was added and then reverted
(because of Atom failures), this time specifying explicitly the CPU in
addition to the triple. The test case now checks all variations (data
mode, cpu Atom vs. Core).
llvm-svn: 174542
Most of PPCCallingConv.td is used only by the 32-bit SVR4 ABI. Rename
things to clarify this. Also delete some code that's been commented out
for a long time.
llvm-svn: 174526
Only implemented for R600 so far. SI is missing implementations of a
few callbacks used by the Indirect Addressing pass and needs code to
handle frame indices.
At the moment R600 only supports array sizes of 16 dwords or less.
Register packing of vector types is currently disabled, which means that a
vec4 is stored in T0_X, T1_X, T2_X, T3_X, rather than T0_XYZW. In order
to correctly pack registers in all cases, we will need to implement an
analysis pass for R600 that determines the correct vector width for each
array.
v2:
- Add support for i8 zext load from stack.
- Coding style fixes
v3:
- Don't reserve registers for indirect addressing when it isn't
being used.
- Fix bug caused by LLVM limiting the number of SubRegIndex
declarations.
v4:
- Fix 64-bit defines
llvm-svn: 174525
Weakly defined symbols should evaluate to 0 if they're undefined at
link-time. This is impossible to do with the usual address generation
patterns, so we should use a literal pool entry to materlialise the
address.
llvm-svn: 174518
These instructions are a late addition to the architecture, and may
yet end up behind an optional attribute, but for now they're available
at all times.
llvm-svn: 174496
Attribute groups are of the form:
#0 = attributes { noinline "no-sse" "cpu"="cortex-a8" alignstack=4 }
Target-dependent attributes are represented as strings. Attributes can have
optional values associated with them. E.g., the "cpu" attribute has the value
"cortex-a8".
Target-independent attributes are listed as enums inside the attribute classes.
Multiple attribute groups can be referenced by the same object. In that case,
the attributes are merged together.
llvm-svn: 174493
Use the validateTargetOperandClass() hook to match literal '#0' operands in
InstAlias definitions. Previously this required per-instruction C++ munging of the
operand list, but not is handled as a natural part of the matcher. Much better.
No additional tests are required, as the pre-existing tests for these instructions
exercise the new behaviour as being functionally equivalent to the old.
llvm-svn: 174488
For example, ARM has several instructions with a literal '#0' immediate in the syntax
that's not represented as an actual operand. The asm matcher is expected a token
operand, but the parser will have created an immediate operand. This is currently
handled by dedicated per-instruction C++ munging of the ParsedAsmOperand list, but
will be better handled by this hook.
llvm-svn: 174487
This is useful when parsing an object that references multiple attribute groups.
N.B. If both builders have alignments specified, then they should match!
llvm-svn: 174480
Failure: undefined symbol 'Lline_table_start0'.
Root-cause: we use a symbol subtraction to calculate at_stmt_list, but
the line table entries are not dumped in the assembly.
Fix: use zero instead of a symbol subtraction for Compile Unit 0.
llvm-svn: 174479
If an Apple llvmCore build is done without assertions, and a client uses
the llvmCore headers with assertions enabled, or vice versa, then things will
break because some of the structure sizes in the API are different. Use the
unifdef tool to make the headers unconditionally match the way the llvmCore
libraries were built.
llvm-svn: 174460
This reverts commit a33e1fafac7fedb1b080ef07ddf9ad6ddff3a830.
This unit test crashes on Darwon. It needs to be temporarily reverted
to unblock the test infrastructure.
llvm-svn: 174458
The stuff we're handing are all enums (Attribute::AttrKind), integers and
strings. Don't convert them to Constants, which is an unnecessary step here. The
rest of the changes are mostly mechanical.
llvm-svn: 174456
pointer in function prologs/epilogs. The opcodes should depend on the
data model (LP64 vs. ILP32) rather than the architecture bit-ness.
llvm-svn: 174446
is a vararg function.
The original code was examining flag OutputArg::IsFixed to determine whether
CC_MipsN_VarArg or CC_MipsN should be called. This is not correct, since this
flag is often set to false when the function being analyzed is a non-variadic
function.
llvm-svn: 174442
base point of a load, and the overall alignment of the load. This caused infinite loops in DAG combine with the
original application of this patch.
ORIGINAL COMMIT LOG:
When the target-independent DAGCombiner inferred a higher alignment for a load,
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
llvm-svn: 174431
All targets are now adding return value registers as implicit uses on
return instructions, and there is no longer a need for the live out
lists.
llvm-svn: 174417
Benjamin Kramer