it in with the SSSE3 instructions.
Steward! Could you place this chair by the aft sun deck? I'm trying to get away
from the Astors. They are such boors!
llvm-svn: 115552
The x86_mmx type is used for MMX intrinsics, parameters and
return values where these use MMX registers, and is also
supported in load, store, and bitcast.
Only the above operations generate MMX instructions, and optimizations
do not operate on or produce MMX intrinsics.
MMX-sized vectors <2 x i32> etc. are lowered to XMM or split into
smaller pieces. Optimizations may occur on these forms and the
result casted back to x86_mmx, provided the result feeds into a
previous existing x86_mmx operation.
The point of all this is prevent optimizations from introducing
MMX operations, which is unsafe due to the EMMS problem.
llvm-svn: 115243
Omission of memory form of PI2PD is intentional; this
does not use an MMX register and does not put the chip
into MMX mode (PI2PS, oddly enough, does).
Operands of PI2PS follow the gcc builtin, not Intel.
llvm-svn: 113388
this fixes rdar://8192860. Unfortunately it can only be triggered
with llc because llvm-mc matches another (correctly encoded) version
of this, so no testcase.
llvm-svn: 108454
Move some utility TableGen defs, classes, etc. into a common file so
they may be used my multiple pattern files. We will use this for
the AVX specification to help with the transition from the current
SSE specification.
llvm-svn: 95727
bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.
llvm-svn: 85517
- Used to mark fake instructions which don't correspond to an actual machine
instruction (or are duplicates of a real instruction). This is to be used for
"special cases" in the .td files, which should be ignored by things like the
assembler and disassembler. We still need a good solution to handle pervasive
duplication, like with the Int_ instructions.
- Set the bit on fake "mov 0" style instructions, which allows turning an
assembler matcher warning into a hard error.
- -2 FIXMEs.
llvm-svn: 78731
instructions, which implies that there is an explicit memory operand. There is
(however) no explicit memory operand; although this is a store, the only memory
operand is implicit, indicated by DS:EDI. This causes the table-generation code
for the disassembler to report an error."
Patch by Sean Callanan!
llvm-svn: 73989
nodes for vectors with an i16 element type. Add an optimization for
building a vector which is all zeros/undef except for the bottom
element, where the bottom element is an i8 or i16.
llvm-svn: 72988
the Intel manual (screenshot) says it should be 0b11110110 (f6). The existing
encoding causes a disassembly conflict with MMX_PAVGBrm, which really should be
0f e0."
Patch by Sean Callanan!
llvm-svn: 72508
PR2957
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
llvm-svn: 70225
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
A clean up of x86 shuffle code, and some canonicalizing in DAGCombiner is next.
llvm-svn: 69952
X86 lowering normalize vector 0 to v4i32. However DAGCombine can fold (sub x, x) -> 0 after legalization. It can create a zero vector of a type that's not expected (e.g. v8i16). We don't want to disable the optimization since leaving a (sub x, x) is really bad. Add isel patterns for other types of vector 0 to ensure correctness. It's highly unlikely to happen other than in bugpoint reduced test cases.
llvm-svn: 48279
x86 backend where instructions were not marked maystore/mayload, and perf issues where
instructions were not marked neverHasSideEffects. It would be really nice if we could
write patterns for copy instructions.
I have audited all the x86 instructions down to MOVDQAmr. The flags on others and on
other targets are probably not right in all cases, but no clients currently use this
info that are enabled by default.
llvm-svn: 45829
based what flag to set on whether it was already marked as
"isRematerializable". If there was a further check to determine if it's "really"
rematerializable, then I marked it as "mayHaveSideEffects" and created a check
in the X86 back-end similar to the remat one.
llvm-svn: 45132
sometimes emit "zero" and "all one" vectors multiple times,
for example:
_test2:
pcmpeqd %mm0, %mm0
movq %mm0, _M1
pcmpeqd %mm0, %mm0
movq %mm0, _M2
ret
instead of:
_test2:
pcmpeqd %mm0, %mm0
movq %mm0, _M1
movq %mm0, _M2
ret
This patch fixes this by always arranging for zero/one vectors
to be defined as v4i32 or v2i32 (SSE/MMX) instead of letting them be
any random type. This ensures they get trivially CSE'd on the dag.
This fix is also important for LegalizeDAGTypes, as it gets unhappy
when the x86 backend wants BUILD_VECTOR(i64 0) to be legal even when
'i64' isn't legal.
This patch makes the following changes:
1) X86TargetLowering::LowerBUILD_VECTOR now lowers 0/1 vectors into
their canonical types.
2) The now-dead patterns are removed from the SSE/MMX .td files.
3) All the patterns in the .td file that referred to immAllOnesV or
immAllZerosV in the wrong form now use *_bc to match them with a
bitcast wrapped around them.
4) X86DAGToDAGISel::SelectScalarSSELoad is generalized to handle
bitcast'd zero vectors, which simplifies the code actually.
5) getShuffleVectorZeroOrUndef is updated to generate a shuffle that
is legal, instead of generating one that is illegal and expecting
a later legalize pass to clean it up.
6) isZeroShuffle is generalized to handle bitcast of zeros.
7) several other minor tweaks.
This patch is definite goodness, but has the potential to cause random
code quality regressions. Please be on the lookout for these and let
me know if they happen.
llvm-svn: 44310
X86InstrInfo::isReallyTriviallyReMaterializable knows how to handle
with the isReMaterializable flag so that it is given a chance to handle
them. Without hoisting constant-pool loads from loops this isn't very
visible, though it does keep CodeGen/X86/constant-pool-remat-0.ll from
making a copy of the constant pool on the stack.
llvm-svn: 40736
mnemonics from their operands instead of single spaces. This makes the
assembly output a little more consistent with various other compilers
(f.e. GCC), and slightly easier to read. Also, update the regression
tests accordingly.
llvm-svn: 40648
InOperandList. This gives one piece of important information: # of results
produced by an instruction.
An example of the change:
def ADD32rr : I<0x01, MRMDestReg, (ops GR32:$dst, GR32:$src1, GR32:$src2),
"add{l} {$src2, $dst|$dst, $src2}",
[(set GR32:$dst, (add GR32:$src1, GR32:$src2))]>;
=>
def ADD32rr : I<0x01, MRMDestReg, (outs GR32:$dst), (ins GR32:$src1, GR32:$src2),
"add{l} {$src2, $dst|$dst, $src2}",
[(set GR32:$dst, (add GR32:$src1, GR32:$src2))]>;
llvm-svn: 40033
instruction flag, and use the flag along with a virtual member function
hook for targets to override if there are instructions that are only
trivially rematerializable with specific operands (i.e. constant pool
loads).
llvm-svn: 37728
with a general target hook to identify rematerializable instructions. Some
instructions are only rematerializable with specific operands, such as loads
from constant pools, while others are always rematerializable. This hook
allows both to be identified as being rematerializable with the same
mechanism.
llvm-svn: 37644
Craig Topper