Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238349
This commit a 3rd attempt at comitting the initial MIR serialization patch.
The first commit (r237708) was reverted in 237730. Then the second commit
(r237954) was reverted in r238007, as the MIR library under CodeGen caused
a circular dependency where the CodeGen library depended on MIR and MIR
library depended on CodeGen.
This commit has fixed the dependencies between CodeGen and MIR by
reorganizing the MIR serialization code - the code that prints out
MIR has been moved to CodeGen, and the MIR library has been renamed
to MIRParser. Now the CodeGen library doesn't depend on the
MIRParser library, thus the circular dependency no longer exists.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 238341
remove ExecutionEngine's dependence on CodeGen. NFC.
This is a follow-up to r238080.
Differential Revision: http://reviews.llvm.org/D9830
llvm-svn: 238244
This is part of the work to remove TargetMachine::resetTargetOptions.
In this patch, instead of updating global variable NoFramePointerElim in
resetTargetOptions, its use in DisableFramePointerElim is replaced with a call
to TargetFrameLowering::noFramePointerElim. This function determines on a
per-function basis if frame pointer elimination should be disabled.
There is no change in functionality except that cl:opt option "disable-fp-elim"
can now override function attribute "no-frame-pointer-elim".
llvm-svn: 238080
Summary:
This supersedes http://reviews.llvm.org/D4010, hopefully properly
dealing with the JIT case and also adds an actual test case.
DwarfContext was basically already usable for the JIT (and back when
we were overwriting ELF files it actually worked out of the box by
accident), but in order to resolve relocations correctly it needs
to know the load address of the section.
Rather than trying to get this out of the ObjectFile or requiring
the user to create a new ObjectFile just to get some debug info,
this adds the capability to pass in that info directly.
As part of this I separated out part of the LoadedObjectInfo struct
from RuntimeDyld, since it is now required at a higher layer.
Reviewers: lhames, echristo
Reviewed By: echristo
Subscribers: vtjnash, friss, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D6961
llvm-svn: 237961
This commit is a 2nd attempt at committing the initial MIR serialization patch.
The first commit (r237708) made the incremental buildbots unstable and was
reverted in r237730. The original commit didn't add a terminating null
character to the LLVM IR source which was passed to LLParser, and this
sometimes caused the test 'llvmIR.mir' to fail with a parsing error because
the LLVM IR source didn't have a null character immediately after the end
and thus LLLexer encountered some garbage characters that ultimately caused
the error.
This commit also includes the other test fixes I committed in
r237712 (llc path fix) and r237723 (remove target triple) which
also got reverted in r237730.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 237954
This starts merging MCSection and MCSectionData.
There are a few issues with the current split between MCSection and
MCSectionData.
* It optimizes the the not as important case. We want the production
of .o files to be really fast, but the split puts the information used
for .o emission in a separate data structure.
* The ELF/COFF/MachO hierarchy is not represented in MCSectionData,
leading to some ad-hoc ways to represent the various flags.
* It makes it harder to remember where each item is.
The attached patch starts merging the two by moving the alignment from
MCSectionData to MCSection.
Most of the patch is actually just dropping 'const', since
MCSectionData is mutable, but MCSection was not.
llvm-svn: 237936
DWARF standard claims that each compilation/type unit header in
.debug_info/.debug_types section must be followed by corresponding
compile/type unit DIE, possibly with its children. Two situations
are possible:
* compile/type unit DIE is missing because DWARF producer failed to
emit it.
* DWARF parser failed to parse unit DIE correctly, for instance if it
contains some unsupported attributes (see r237721, for instance).
In either of these cases, the library, and the tools that use it
(llvm-dwarfdump, llvm-symbolizer) should not crash. Insert appropriate
checks to protect against this.
llvm-svn: 237733
The incremental buildbots entered a pass-fail cycle where during the fail
cycle one of the tests from this commit fails for an unknown reason. I
have reverted this commit and will investigate the cause of this problem.
llvm-svn: 237730
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 237708
llvm-cov was truncating numbers that were larger than a particular
fixed width, which is as confusing as it is useless. Instead, we use
engineering notation with SI prefix for magnitude.
llvm-svn: 237307
-dump mode normally omits blob data that contains unprintable characters.
When -show-binary-blobs is passed, it unilaterally escapes all blobs,
allowing those with binary data to be displayed.
llvm-svn: 237276
to use the information in the module rather than TargetOptions.
We've had and clang has used the use-soft-float attribute for some
time now so have the backends set a subtarget feature based on
a particular function now that subtargets are created based on
functions and function attributes.
For the one middle end soft float check go ahead and create
an overloadable TargetLowering::useSoftFloat function that
just checks the TargetSubtargetInfo in all cases.
Also remove the command line option that hard codes whether or
not soft-float is set by using the attribute for all of the
target specific test cases - for the generic just go ahead and
add the attribute in the one case that showed up.
llvm-svn: 237079
Summary:
1. llvm-as/llvm-dis tools do not check for input filename length.
2. llvm-dis does not verify the `Streamer` variable against `nullptr` properly, so the `M` variable could be uninitialized (e.g. if the input file does not exist) leading to null dref.
Patch by Lenar Safin!
Reviewers: samsonov
Reviewed By: samsonov
Subscribers: samsonov, llvm-commits
Differential Revision: http://reviews.llvm.org/D9584
llvm-svn: 237051
Now caller of ELFState::writeSectionContent() methods is responsible to check
a section type and selects an appropriate writeSectionContent method.
So unexpected section type inside writeSectionContent method indicates
a wrong usage of the method and should be guarded by assert.
llvm-svn: 236808
options.
This commit fixes a bug in llc and opt where "-mcpu" and "-mattr" wouldn't
override function attributes "-target-cpu" and "-target-features" in the IR.
Differential Revision: http://reviews.llvm.org/D9537
llvm-svn: 236677
Specifically, this patch correctly respects the -demangle option,
and additionally adds a hidden --relative-address option allows
input addresses to be relative to the module load address instead
of absolute addresses into the image.
llvm-svn: 236653
I tracked down the bug to an unchecked malloc in SmallVectorBase::grow_pod().
This malloc is returning NULL on my machine when running under bugpoint but not
when -enable-valgrind is given.
llvm-svn: 236504
and avoid cloning unused decls into every partition.
Module partitioning showed up as a source of significant overhead when I
profiled some trivial test cases. Avoiding the overhead of partitionging
for uncalled functions helps to mitigate this.
This change also means that it is no longer necessary to have a
LazyEmittingLayer underneath the CompileOnDemand layer, since the
CompileOnDemandLayer will not extract or emit function bodies until they are
called.
llvm-svn: 236465
This patch adds the --load-address command line option to
llvm-pdbdump, which dumps all addresses assuming the module has
loaded at the specified address.
Additionally, this patch adds an option to llvm-pdbdump to support
dumping of public symbols (i.e. symbols with external linkage).
llvm-svn: 236342
option to print the archive headers using raw numeric values. Also add the -archive-member-offsets
for use with these to also trigger printing of the offset of the archive member from the start
of the archive.
llvm-svn: 236252
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
Reverse libLTO's default behaviour for preserving use-list order in
bitcode, and add API for controlling it. The default setting is now
`false` (don't preserve them), which is consistent with `clang`'s
default behaviour.
Users of libLTO should call `lto_codegen_should_embed_uselists(CG,true)`
prior to calling `lto_codegen_write_merged_modules()` whenever the
output file isn't part of the production workflow in order to reproduce
results with subsequent calls to `llc`.
(I haven't added tests since `llvm-lto` (the test tool for LTO) doesn't
support bitcode output, and even if it did: there isn't actually a good
way to test whether a tool has passed the flag. If the order is already
"natural" (if the order will already round-trip) then no use-list
directives are emitted at all. At some point I'll circle back to add
tests to `llvm-as` (etc.) that they actually respect the flag, at which
point I can somehow add a test here as well.)
llvm-svn: 235943
This will enable us to create a PDBContext so as to expose some
amount of debug info functionality through a common interace.
Differential Revision: http://reviews.llvm.org/D9205
Reviewed by: Alexey Samsonov
llvm-svn: 235612
ARM32 ELF R_ARM_V4BX relocation format is a special relocation type
that records the location of an ARMv4t BX instruction to enable a
static linker to generate ARMv4 compatible instructions. This
relocation does not contain a reference symbol.
This patch enabled its creation by removing the requeriment of a
relocation symbol target in ELFState<ELFT>::writeSectionContent.
llvm-svn: 235513
Duncan P. N. Exon Smith