that one of the numbers is signed while the other is unsigned. This could lead
to a wrong result when the signed was promoted to an unsigned int.
* Add the data layout line to the testcase so that it will test the appropriate
thing.
Patch by David Terei!
llvm-svn: 128577
StringMap was not properly updating NumTombstones after a clear or rehash.
This was not fatal until now because the table was growing faster than
NumTombstones could, but with the previous change of preventing infinite
growth of the table the invariant (NumItems + NumTombstones <= NumBuckets)
stopped being observed, causing infinite loops in certain situations.
Patch by José Fonseca!
llvm-svn: 128567
The rewriter can keep track of multiple stack slots in the same register if they
happen to have the same value. When an instruction modifies a stack slot by
defining a register that is mapped to a stack slot, other stack slots in that
register are no longer valid.
This is a very rare problem, and I don't have a simple test case. I get the
impression that VirtRegRewriter knows it is about to be deleted, inventing a
last opaque problem.
<rdar://problem/9204040>
llvm-svn: 128562
The idea is, that if an ieee 754 float is divided by a power of two, we can
turn the division into a cheaper multiplication. This function sees if we can
get an exact multiplicative inverse for a divisor and returns it if possible.
This is the hard part of PR9587.
I tested many inputs against llvm-gcc's frotend implementation of this
optimization and didn't find any difference. However, floating point is the
land of weird edge cases, so any review would be appreciated.
llvm-svn: 128545
When DCE clones a live range because it separates into connected components,
make sure that the clones enter the same register allocator stage as the
register they were cloned from.
For instance, clones may be split even when they where created during spilling.
Other registers created during spilling are not candidates for splitting or even
(re-)spilling.
llvm-svn: 128524
was lowering them to sext / uxt + mul instructions. Unfortunately the
optimization passes may hoist the extensions out of the loop and separate them.
When that happens, the long multiplication instructions can be broken into
several scalar instructions, causing significant performance issue.
Note the vmla and vmls intrinsics are not added back. Frontend will codegen them
as intrinsics vmull* + add / sub. Also note the isel optimizations for catching
mul + sext / zext are not changed either.
First part of rdar://8832507, rdar://9203134
llvm-svn: 128502
The instruction to be rematerialized may not be the one defining the register
that is being spilled. The traceSiblingValue() function sees through sibling
copies to find the remat candidate.
llvm-svn: 128449
isel lowering to fold the zero-extend's and take advantage of no-stall
back to back vmul + vmla:
vmull q0, d4, d6
vmlal q0, d5, d6
is faster than
vaddl q0, d4, d5
vmovl q1, d6
vmul q0, q0, q1
This allows us to vmull + vmlal for:
f = vmull_u8( vget_high_u8(s), c);
f = vmlal_u8(f, vget_low_u8(s), c);
rdar://9197392
llvm-svn: 128444
otool(1), this time with the needed fix for case sensitive file systems :) .
This is a work in progress as the interface for producing symbolic operands is
not done. But a hacked prototype using information from the object file's
relocation entiries and replacing immediate operands with MCExpr's has been
shown to work with no changes to the instrucion printer. These APIs will be
moved into a dynamic library at some point.
llvm-svn: 128415
The reassignment phase was able to move interference with a higher spill weight,
but it didn't happen very often and it was fairly expensive.
The existing interference eviction picks up the slack.
llvm-svn: 128397
removes one use of X which helps it pass the many hasOneUse() checks.
In my analysis, this turns up very often where X = A >>exact B and that can't be
simplified unless X has one use (except by increasing the lifetime of A which is
generally a performance loss).
llvm-svn: 128373
The main register class may have been inflated by live range splitting, so that
register class is not necessarily valid for the snippet instructions.
Use the original register class for the stack slot interval.
llvm-svn: 128351
It couldn't be used outside of the file because SDISelAsmOperandInfo
is local to SelectionDAGBuilder.cpp. Making it a static function avoids
a weird linkage dance.
llvm-svn: 128342
There are two ways that a later store can comletely overlap a previous store:
1. They both start at the same offset, but the earlier store's size is <= the
later's size, or
2. The earlier store's offset is > the later's offset, but it's offset + size
doesn't extend past the later's offset + size.
llvm-svn: 128332
Correctly terminate the range of register DBG_VALUEs when the register is
clobbered or when the basic block ends.
The code is now ready to deal with variables that are sometimes in a register
and sometimes on the stack. We just need to teach emitDebugLoc to say 'stack
slot'.
llvm-svn: 128327
masks to match inversely for the code as is to work. For the example given
we actually want:
bfi r0, r2, #1, #1
not #0, however, given the way the pattern is written it's not possible
at the moment.
Fixes rdar://9177502
llvm-svn: 128320
This is a work in progress as the interface for producing symbolic operands is
not done. But a hacked prototype using information from the object file's
relocation entiries and replacing immediate operands with MCExpr's has been
shown to work with no changes to the instrucion printer. These APIs will be
moved into a dynamic library at some point.
llvm-svn: 128308
The .dot directives don't need labels, that is a leftover from when we created
line number info manually.
Instructions following a DBG_VALUE can share its label since the DBG_VALUE
doesn't produce any code.
llvm-svn: 128284
These instructions were changed to not embed the addressing mode within the MC instructions
We also need to update the corresponding assert stmt. Also add a test case.
llvm-svn: 128240
Set the encoding bits to {0,?,?,0}, not 0. Plus delegate the disassembly of ADR to
the more generic ADDri/SUBri instructions, and add a test case for that.
llvm-svn: 128234
The MC asm lexer wasn't honoring a non-default (anything but ';') statement
separator. Fix that, and generalize a bit to support multi-character
statement separators.
llvm-svn: 128227
entries being compared may not be ARMConstantPoolValue. Without checking
whether they are ARMConstantPoolValue first, and if the stars and moons
are aligned properly, the equality test may return true (when the first few
words of two Constants' values happen to be identical) and very bad things can
happen.
rdar://9125354
llvm-svn: 128203
These instructions were changed to not embed the addressing mode within the MC instructions
We also need to update the corresponding assert stmt. Also add two test cases.
llvm-svn: 128191
were incomplete. The assert stmt needs to be updated and the operand index incrment is wrong.
Fix the bad logic and add some sanity checking to detect bad instruction encoding;
and add a test case.
llvm-svn: 128186
int tries = INT_MAX;
while (tries > 0) {
tries--;
}
The check should be:
subs r4, #1
cmp r4, #0
bgt LBB0_1
The subs can set the overflow V bit when r4 is INT_MAX+1 (which loop
canonicalization apparently does in this case). cmp #0 would have cleared
it while not changing the N and Z bits. Since BGT is dependent on the V
bit, i.e. (N == V) && !Z, it is not safe to eliminate the cmp #0.
rdar://9172742
llvm-svn: 128179
The ExecutionEngine constructor already added the module, so there's no
need to call addModule() directly. Doing so causes a double-free of the
Module at program termination.
llvm-svn: 128171
so the scheduler can't create new interferences on the copies
themselves. Prior to this fix the scheduler could get stuck in a loop
creating copies.
Fixes PR9509.
llvm-svn: 128164
Each of these instructions may have a RegsClobberInsn entry that can't be
ignored. Consecutive ranges are coalesced later when DwarfDebug::emitDebugLoc
merges entries.
llvm-svn: 128155
I'm tired of doing this manually for each checkout.
If anyone knows a better way debug isel for non-trivial tests feel
free to revert and let me know how to do it.
llvm-svn: 128132
This will extend the ranges of debug info variables in registers until they are
clobbered.
Fix 1: Don't mistake DBG_VALUE instructions referring to incoming arguments on
the stack with DBG_VALUE instructions referring to variables in the frame
pointer. This fixes the gdb test-suite failure.
Fix 2: Don't trace through copies to physical registers setting up call
arguments. These registers are call clobbered, and the source register is more
likely to be a callee-saved register that can be extended through the call
instruction.
llvm-svn: 128114
VFP Load/Store Multiple Instructions used to embed the IA/DB addressing mode within the
MC instruction; that has been changed so that now, for example, VSTMDDB_UPD and VSTMDIA_UPD
are two instructions. Update the ARMDisassemblerCore.cpp's DisassembleVFPLdStMulFrm()
to reflect the change.
Also add a test case.
llvm-svn: 128103
Support argument passing simple, common, prototypes directly. More
complicated scenarios will require building up a stub function, which the
MC-JIT isn't set up to handle yet.
Add Intercept.cpp, which is just a copy from ExecutionEngine/JIT for now,
to handle looking looking up external symbol names. This probably more
properly belongs as part of RuntimeDyld. It'll migrate there as things
flesh out more fully.
llvm-svn: 128090
Cameron Zwarich