If the shift amount is known, we can determine the known bits of the
output based on the known bits of two inputs.
This is essentially the same functionality as implemented in D54869,
but for ValueTracking rather than InstCombine SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D55140
llvm-svn: 348091
This makes the SDAG behavior consistent with the way we do this in IR.
It's possible that we were getting the wrong answer before. For example,
'xor undef, undef --> 0' but 'xor undef, C' --> undef.
But the most practical improvement is likely as shown in the tests here -
for FP, we were overconstraining undef lanes to NaN, and that can prevent
vector simplifications/narrowing (see D51553).
llvm-svn: 348090
This change prevents the crash noted in the post-commit comments
for rL347478 :
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181119/605166.html
We can't guarantee that an oversized shift amount is folded away,
so we have to check for it.
Note that I committed an incomplete fix for that crash with:
rL347502
But as discussed here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181126/605679.html
...we have to try harder.
So I'm not sure how to expose the bug now (and apparently no fuzzers have found
a way yet either).
On the plus side, we have discovered that we're missing real optimizations by
not simplifying nodes sooner, so the earlier fix still has value, and there's
likely more value in extending that so we can simplify more opcodes and simplify
when doing RAUW and/or putting nodes on the combiner worklist.
Differential Revision: https://reviews.llvm.org/D54954
llvm-svn: 348089
We were duplicating code around the existing isImpliedCondition() that
checks for a predecessor block/dominating condition, so make that a
wrapper call.
llvm-svn: 348088
Previously this code generated its own extracts and build_vector. But we can use a simpler concat_vectors or scalar_to_vector operation and let type legalization do additional legalization of those operations.
llvm-svn: 348087
The generic legalizer will fall back to a stack spill that uses a truncating store. That store will get expanded into a shuffle and non-truncating store on pre-avx512 targets. Once that happens the stack store/load pair will be combined away leaving behind the shuffle and bitcasts. On avx512 targets the truncating store is legal so doesn't get folded away.
By custom legalizing it we can avoid this churn and maybe produce better code.
llvm-svn: 348085
The vector modifier is considered separate, so
don't treat it as a conversion specifier.
This is still not warning on some cases, like
using a type that isn't a valid vector element.
Fixes bug 39652
llvm-svn: 348084
The spec is ambiguous on whether vector types are allowed to be
implicitly converted. The only legal context I think this can
be used for OpenCL is printf, where it seems necessary.
llvm-svn: 348083
If we know that we'll definitely save LR to a register, there's no reason to
pre-check whether or not a stack instruction is unsafe to fix up.
This makes it so that we check for that condition before mapping instructions.
This allows us to outline more, since we don't pessimise as many instructions.
Also update some tests, since we outline more.
llvm-svn: 348081
Summary: With sse4.1 we use two zero_extend_vector_inreg and a pshufd to expand the v16i8 input into two v8i16 vectors for the multiply. That's 3 shuffles to extend one operand. The other operand is usually constant as this is mostly used by division by constant optimization. Pre sse4.1 we use a punpckhbw and a punpcklbw with a zero vector. That's two shuffles and an xor and a copy due to tied register constraints. That seems maybe better than the 3 shuffles. With AVX we avoid the copy so that's obviously better.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55138
llvm-svn: 348079
Summary:
The purpose of this option is provide a way for the ASan dylib
to be loaded via `dlopen()` without triggering most initialization
steps (e.g. shadow memory set up) that normally occur when the
ASan dylib is loaded.
This new functionality is exposed by
- A `SANITIZER_SUPPORTS_INIT_FOR_DLOPEN` macro which indicates if the
feature is supported. This only true for Darwin currently.
- A `HandleDlopenInit()` function which should return true if the library
is being loaded via `dlopen()` and
`SANITIZER_SUPPORTS_INIT_FOR_DLOPEN` is supported. Platforms that
support this may perform any initialization they wish inside this
function.
Although disabling initialization is something that could potentially
apply to other sanitizers it appears to be unnecessary for other
sanitizers so this patch only makes the change for ASan.
rdar://problem/45284065
Reviewers: kubamracek, george.karpenkov, kcc, eugenis, krytarowski
Subscribers: #sanitizers, llvm-commits
Differential Revision: https://reviews.llvm.org/D54469
llvm-svn: 348078
We were adding the entire scalarization extraction cost for reductions, which returns the total cost of extracting every element of a vector type.
For reductions we don't need to do this - we just need to extract the 0'th element after the reduction pattern has completed.
Fixes PR37731
Rebased and reapplied after being reverted in rL347541 due to PR39774 - which was fixed by D54955/rL347759 and D55017/rL347997
Differential Revision: https://reviews.llvm.org/D54585
llvm-svn: 348076
The identity ~(x ^ y) == (~x ^ y) == (x ^ ~y) allows XNOR (XOR/NOT) to turn into NOT/XOR. Handling this case with its own split means we can make the NOT remain in the scalar unit. Previously, we split 64-bit XNOR into two 32-bit XNOR, then lowered. Now, we get three instructions (s_not, v_xor, v_xor) rather than four in the case where either of the sources is a scalar 64-bit.
Add test cases to xnor.ll to attempt XNOR Vx, Sy and XNOR Sx, Vy. Also adding test that uses the opposite identity such that (~x ^ y) on the scalar unit (or vector for gfx906) can generate XNOR. This already worked, but I didn't see a test for it.
Differential: https://reviews.llvm.org/D55071
llvm-svn: 348075
D52935 introduced the ability for SimplifyDemandedBits to call SimplifyDemandedVectorElts through BITCASTs if the demanded bit mask entirely covered the sub element.
This patch relaxes this to demanding an element if we need any bit from it.
Differential Revision: https://reviews.llvm.org/D54761
llvm-svn: 348073
Extend ssub.sat(X, C) -> sadd.sat(X, -C) canonicalization to also
support non-splat vector constants. This is done by generalizing
the implementation of the isNotMinSignedValue() helper to return
true for constants that are non-splat, but don't contain any
signed min elements.
Differential Revision: https://reviews.llvm.org/D55011
llvm-svn: 348072
Summary:
Follow up to D54270, which allowed importing of var args functions
unless they called va_start. As pointed out in the post-commit comments
on that patch, the inliner can handle functions that call va_start in
certain situations as well. Go ahead and enable importing of all var
args functions. Measurements on a large binary show that this increases
imports and binary size by an insignificant amount.
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D54607
llvm-svn: 348068
As noted by Eli Friedman <https://reviews.llvm.org/D52977?id=168629#1315291>,
the RV64I shift patterns for SLLW/SRLW/SRAW make some incorrect assumptions.
SRAW assumed that (sext_inreg foo, i32) could only be produced when
sign-extended an i32. However, it can be produced by input such as:
define i64 @tricky_ashr(i64 %a, i64 %b) {
%1 = shl i64 %a, 32
%2 = ashr i64 %1, 32
%3 = ashr i64 %2, %b
ret i64 %3
}
It's important not to select sraw in the above case, because sraw only uses
bits lower 5 bits from the shift, while a shift of 32-63 would be valid.
Similarly, the patterns for srlw assumed (and foo, 0xffffffff) would only be
produced when zero-extending a value that was originally i32 in LLVM IR. This
is obviously incorrect.
This patch removes the SLLW/SRLW/SRAW shift patterns for the time being and
adds test cases that would demonstrate a miscompile if the incorrect patterns
were re-added.
llvm-svn: 348067
The two LLVM_DUMP_METHOD methods have a undefined reference on clang::DiagnosticsEngine::DiagStateMap::dump.
tools/clang/tools/extra/clangd/benchmarks/IndexBenchmark links in
clangDaemon but does not link in clangBasic explicitly, which causes a
linker error "undefined symbol" in !NDEBUG + -DBUILD_SHARED_LIBS=on builds.
Move LLVM_DUMP_METHOD methods to .cpp to fix IndexBenchmark. They should
be unconditionally defined as they are also used by non-dump-method #pragma clang __debug diag_mapping
llvm-svn: 348065
This allows disabling implicit projects via the LLVM_TOOL_*_BUILD
variables, similar to how implicit tools can be disabled. They'll still
be enabled by default, since add_llvm_external_project defaults the
LLVM_TOOL_*_BUILD variables to ON for in-tree implciit projects.
Differential Revision: https://reviews.llvm.org/D55105
llvm-svn: 348064
This adds a callback to PrintingPolicy to allow CGDebugInfo to remap
file paths according to -fdebug-prefix-map. Otherwise the debug info
(particularly function names for C++ lambdas) may contain paths that
should have been remapped in the debug info.
<rdar://problem/46128056>
Differential Revision: https://reviews.llvm.org/D55137
llvm-svn: 348060
identify_magic does not need the file to be null terminated. Passing
true here causes the file reading code to decide not to use mmap in
some rare cases (which happen to be true 100% of the time in PDB files)
which can lead to very large files failing to load. Since it was
probably just an accident that we were passing true here (since it is
the default function parameter), this should be strictly an improvement.
llvm-svn: 348059
This adds a script called build.py as well as a lit substitution
called %build that we can use to invoke it. The idea is that
this allows a lit test to build test inferiors without having
to worry about architecture / platform specific differences,
command line syntax, finding / configurationg a proper toolchain,
and other issues. They can simply write something like:
%build --arch=32 -o %t.exe %p/Inputs/foo.cpp
and it will just work. This paves the way for being able to
run lit tests with multiple configurations, platforms, and
compilers with a single test.
Differential Revision: https://reviews.llvm.org/D54914
llvm-svn: 348058
1. In ProcessWindows if we fail to allocate memory, we need to return LLDB_INVALID_ADDRESS rather than 0 or nullptr as that is the invalid address that LLDB looks for
2. In RegisterContextWindows in ReadAllRegisterValues, always create a new buffer. This is what the other platforms do and data_sp is always null in all tested scenarios on Windows as well
llvm-svn: 348055
It seems the two failing tests can be simply fixed after r348037
Fix 3 cases in Analysis/builtin-functions.cpp
Delete the bad CodeGen/builtin-constant-p.c for now
llvm-svn: 348053
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
llvm-svn: 348050
Summary:
The VirtReg2Value mapping is crucial for getting consistently
reliable divergence information into the SelectionDAG. This
patch fixes a bunch of issues that lead to incorrect divergence
info and introduces tight assertions to ensure we don't regress:
1. VirtReg2Value is generated lazily; there were some cases where
a lookup was performed before all relevant virtual registers were
created, leading to an out-of-sync mapping. Those cases were:
- Complex code to lower formal arguments that generated CopyFromReg
nodes from live-in registers (fixed by never querying the mapping
for live-in registers).
- Code that generates CopyToReg for formal arguments that are used
outside the entry basic block (fixed by never querying the
mapping for Register nodes, which don't need the divergence info
anyway).
2. For complex values that are lowered to a sequence of registers,
all registers must be reflected in the VirtReg2Value mapping.
I am not adding any new tests, since I'm not actually aware of any
bugs that these problems are causing with trunk as-is. However,
I recently added a test case (in r346423) which fails when D53283 is
applied without this change. Also, the new assertions should provide
most of the effective test coverage.
There is one test change in sdwa-peephole.ll. The underlying issue
is that since the divergence info is now correct, the DAGISel will
select V_OR_B32 directly instead of S_OR_B32. This leads to an extra
COPY which affects the behavior of MachineLICM in a way that ends up
with the S_MOV_B32 with the constant in a different basic block than
the V_OR_B32, which is presumably what defeats the peephole.
Reviewers: alex-t, arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D54340
llvm-svn: 348049
Summary:
This is patch #3 of the new DivergenceAnalysis
<https://lists.llvm.org/pipermail/llvm-dev/2018-May/123606.html>
The GPUDivergenceAnalysis is intended to eventually supersede the existing
LegacyDivergenceAnalysis. The existing LegacyDivergenceAnalysis produces
incorrect results on unstructured Control-Flow Graphs:
<https://bugs.llvm.org/show_bug.cgi?id=37185>
This patch adds the option -use-gpu-divergence-analysis to the
LegacyDivergenceAnalysis to turn it into a transparent wrapper for the
GPUDivergenceAnalysis.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: jholewinski, jvesely, jfb, llvm-commits, alex-t, sameerds, arsenm, nhaehnle
Differential Revision: https://reviews.llvm.org/D53493
llvm-svn: 348048
These tests should probably go under a separate test file because they
should fold with just -constprop, but they're similar to the scalar
tests already in here.
llvm-svn: 348045
Generalize the existing MatchSelectPatternTest class to also work
with other types of tests. This reduces the amount of boilerplate
necessary to write ValueTracking tests in general, and computeKnownBits
tests in particular.
The inherited convention is that the function must be @test and the
tested instruction %A.
Differential Revision: https://reviews.llvm.org/D55141
llvm-svn: 348043
MSVC 2015 and newer have std::is_trivially_copyable available for use.
We should prefer that over the std::is_class to get this check be
correct.
llvm-svn: 348042
Stephen Kelly