This makes sure that nothing that requires Python is being built
when the LLDB_DISABLE_PYTHON flag is being passed in.
It also changes a use of CPPFLAGS to CPP.Flags since the former is overridden
when external flags are passed in while the later is not. I'm not sure exactly
why LLDB_DISABLE_PYTHON is in CXXFLAGS rather than CPPFLAGS,
but cleaning that up is for another commit.
Differential Revision: http://reviews.llvm.org/D4918
llvm-svn: 217414
This cleans up a couple of warnings [-Wcovered-switch-default] from the build by
removing the default case from a couple of switches which are fully covered.
This is generally better as it will help identify when a new item is added to
the enumeration but the use sites are not updated.
llvm-svn: 217376
This adds a definition for the TypeValidatorImpl_CXX destructor. Because the
destructor is first virtual method, and declared out-of-line, it also serves as
the key function. Since no definition was present, no virtual table for
TypeValidatorImpl_CXX was emitted, which results in link failures due to
references to undefined symbols.
Also add a definition for a TypeValidatorImpl contructor which was declared
out-of-line and referenced in a constructor for TypeValidatorImpl_CXX.
llvm-svn: 217375
Linking Release+Asserts executable lldb-gdbserver (without symbols)
liblldb.so: undefined reference to `lldb_private::MemoryHistoryASan::Initialize()'
liblldb.so: undefined reference to `lldb_private::MemoryHistoryASan::Terminate()'
liblldb.so: undefined reference to `vtable for lldb_private::TypeValidatorImpl_CXX'
liblldb.so: undefined reference to `lldb_private::TypeValidatorImpl::TypeValidatorImpl(lldb_private::TypeValidatorImpl::Flags const&)'
liblldb.so underlinked to lldbPluginMemoryHistoryASan.a when building with the
make based build system (as opposed to CMake).
llvm-svn: 217360
We would previously simply assume that the write would always succeed. However,
write(2) may return -1 for error as well as fail to perform a complete write (in
which case the returned number of bytes will be less than the requested bytes).
Explicitly check if an error condition is encountered. This would previously
not be caught as we default initialized success to true. Add an assertion that
we always perform a complete write (a continuous retry could be added to ensure
that we finish writing completely).
This was caught by GCC's signed comparison warning and manual inspection.
llvm-svn: 217355
Covers more of the behavior of rendezvous breakpoint handling and other
dynamic loader aspects, all on the 'enable log lldb dyld' log channel.
llvm-svn: 217283
Type Validators have the purpose of looking at a ValueObject, and making sure that there is nothing semantically wrong about the object's contents
For instance, if you have a class that represents a speed, the validator might trigger if the speed value is greater than the speed of light
This first patch hooks up the moving parts in the formatters subsystem, but does not link ValueObjects to TypeValidators, nor lets the SB API be exposed to validators
It also lacks the notion of Python validators
llvm-svn: 217277
lldb's internal memory cache chunks that are read from the remote
system. For a remote connection that is especially slow, a user may
need to reduce it; reading a 512 byte chunk of memory whenever a
4-byte region is requested may not be the right decision in these
kinds of environments.
<rdar://problem/18175117>
llvm-svn: 217083
detct unwind loops but there was a code path through there (using
architecture default unwind plans) that didn't do the check, and
could end up with an infinite loop unwind. Move that code into a
separate method and call it from both places where it is needed.
Also remove the use of ABI::FunctionCallsChangeCFA in that check.
I thought about it a lot and none of the architecutres that we're
supporting today can have a looping CFA.
Since the unwinder isn't using ABI::FunctionCallsChangeCFA() and
ABI::StackUsesFrames(), and the unwinder was the only reason
those methods exists, I removed them from the ABI and all its
plugins.
<rdar://problem/17364005>
llvm-svn: 216992
llgs Linux is no longer doing the translation to some gdb fixed signal
numbers. This change modifies the test method to take in the signo
expected for a segfault. The debugserver test uses the fixed gdb number,
and everything else uses signal.SIGSEGV for the platform.
Sidenote: I somehow did not see this reported in multicore tests.
I will need to verify that we aren't missing test failures in that
script. I need to verify why this wasn't more obvious with
test/dosep.py.
llvm-svn: 216770
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
This patch accepts environment variables of the form:
LLDB_DEBUGSERVER_EXTRA_ARG_n
where n starts with 1, and may continue nearly indefinitely (up through std::numeric_limits<uint32_t>::max()).
The code loops around, starting with 1, until it doesn't find one of the environment variables. For each one it does find defined, it appends the environment variable's contents to the end of the debugserver/llgs startup command line issued when the stub is started for local debugging.
I am using this to add arbitrary startup commands to the llgs command line for turning on additional logging. For example:
export LLDB_DEBUGSERVER_EXTRA_ARG_1="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_2="log enable -f /tmp/llgs_packets.log gdb-remote packets"
export LLDB_DEBUGSERVER_EXTRA_ARG_3="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_4="log enable -f /tmp/llgs_process.log lldb process"
llvm-svn: 216745
Yet another step toward ARM64 support. With this commit, lldb-gdbserver started on ARM64 target can be accessed by lldb running on desktop PC and it can process simple commands (like 'continue'). Still ARM64 support lacks NativeRegisterContextLinux_arm64.* code which waits to be implemented.
Based on similar files for Linux x86_64 and Darwin ARM64. Due to common code extraction from Darwin related files, lldb should be tested for any unexpected regression on Darwin ARM64 machines too.
See the following for more details:
http://reviews.llvm.org/D4580http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140825/012670.html
Change by Paul Osmialowski.
llvm-svn: 216737
For hosts that cannot support long thread names, shrink the host
wait4 thread name so that it does not truncate the PID in the thread name.
Change by Shawn Best.
llvm-svn: 216686
This change:
* properly captures execs in NativeProcessLinux.
* clears out all non-main-thread thread metadata in NativeProcessLinux on exec.
* adds a DidExec() method to the NativeProcessProtocol delegate.
* clears out the auxv data cache when we exec (on Linux).
This is a small part of the llgs for local Linux debugging work going on here:
https://github.com/tfiala/lldb/tree/dev-llgs-local
I'm breaking it into small patches.
llvm-svn: 216670
This is a lightweight wrapper around a pid. It is intended to be
lightweight enough to serve as a replacement anywhere we currently
store a pid. It provides convenience methods and common process
operations.
This patch does not yet make use of HostProcess anywhere.
llvm-svn: 216607
LLDB had implemented its own DynamicLibrary class for plugin
support. LLVM has an equivalent mechanism, so this patch deletes
the duplicated code in LLDB and updates LLDB to reference the
mechanism provided by LLVM.
llvm-svn: 216606
See thread here:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140825/012580.html
The original change I made there was due to a segfault. That was
caused by me directly calling PluginManager::Initialize (), with
PluginManager::Initialize() depending on HostInfo::Initialize () to
have been called already (which it wasn't).
The call to PluginManager::Initialize () was erroneous (at least at the
current time) since that method is already called by Debugger::Initialize()'s
implementation.
We will want to revisit initializing a smaller core of the debugger
suitable for lldb-gdbserver and lldb-platform.
llvm-svn: 216581
I copied this originally based on what debugserver was doing. This appears to
be incorrect and unncessary for Linux. The LinuxSignals on the lldb side
don't look for these and therefore they get handled incorrectly.
Leaving the hook in place since I think darwin will continue to need to
translate those signal numbers.
llvm-svn: 216564
Add entries to core_definitions and elf_arch_entries for
those variants. Select the subtype for the variant by parsing
the e_flags field of the elf header.
llvm-svn: 216541
creating the ModuleSpec to load the core file - we won't have a fat
core file and we can end up with cpu subtype mismatches if the core
file header isn't written out completely accurately. We need to
be a little loose in this particular case.
<rdar://problem/17843388>
llvm-svn: 216498
And likewise for qProcessInfo on Linux, but ensures cputype/cpusubtype is not defined. The
Apple case is the more important one, since we take a slightly different path to initialize
ProcessGDBRemote-related remote host/process info if triple is present.
Related to http://llvm.org/bugs/show_bug.cgi?id=20755.
llvm-svn: 216473
This change addresses this bug:
http://llvm.org/bugs/show_bug.cgi?id=20755
This change:
* Modifies llgs to send triple instead of cputype and cpusubtype when not on Apple platforms in qProcessInfo.
* Modifies lldb's GDBRemoteCommunicationClient to handle the triple returned from qProcessInfo if given.
When given, it will prefer to use triple over cputype and cpusubtype.
* Adds gdb-remote protocol tests to verify that cputype and cpusubtype are specified on darwin, and that triple is specified on Linux.
llvm-svn: 216470
I'm about to add some more qProcessInfo tests so I wanted to first pull them out
of the monolithic TestLldbGdbServer test case class.
Related to http://llvm.org/bugs/show_bug.cgi?id=20755
llvm-svn: 216465
I wrote this originally as a part of an unwind library that was using
a different coding convention and some of that old style remained after
its integration into lldb.
llvm-svn: 216419
In practice, 64bit eh_frame is not used even for x86_64 binaries. The main reason is in eh_frame we almost always use pc-relative addressing, so addresses are within 32bits and gcc just sticks to 32bit eh_frame.
I generated 64bit eh_frame for Android Java runtime and unwind successfully in gdb, and in lldb with this patch.
Patch by Tong Shen.
llvm-svn: 216409
We decided to use assmbly profiler instead of eh_frame for frame 0 because for compiler generated code, eh_frame is usually synchronous(a.k.a. only valid at call site); and we have no way to tell if it's asynchronous or not.
But for x86 & x86_64 compiler generated code:
1. clang & GCC describes all prologue instructions in eh_frame;
2. mid-function stack pointer altering instructions can be easily detected.
So we can grab eh_frame, and use assembly profiler to augment it into asynchronous unwind table.
This change also benefits hand-written assembly; eh_frame for hand-written assembly is often asynchronous,so we have a much better chance to successfully unwind through them.
Change by Tong Shen.
llvm-svn: 216406
When building without XCode on sytems where these constants are
not in the system header (or I presume with older versions of XCode),
these are needed to make this file compile, since unlike most other
uses of MachO specific constants, these use the system headers
rather than the LLVM-defined ones.
llvm-svn: 216332
with binaries in the dyld shared cache (esp on iOS) where the file
address for the executable binary (maybe from memory, maybe from
an expanded copy of the dyld shared cache) is different from the
file address in the dSYM. In that case, ObjectFileMachO replaces
the file addresses from the original binary with the dSYM file
addresses (usually 0-based) -- lldb doesn't have a notion of two
file addresses for a given module so they need to agree.
There was a cache of file addresses over in the Symtab so I added
a method to the Module and the objects within to clear any file address
caches if they exist, and added an implementation in the Symtab
module to do that.
<rdar://problem/16929569>
llvm-svn: 216258
This should bring HostInfo up to 99% completion. The remainder
of code in Host will be split into instantiatable classes
representing host processes, threads, dynamic libraries, and
process launching strategies.
llvm-svn: 216230
This continues the effort to get Host code moved over to HostInfo,
and removes many more instances of preprocessor defines along the
way.
llvm-svn: 216195
See this email thread:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140818/012487.html
This patch handles the case where the inferior process exits but leaves the ReadThread in a continuous loop reading from the communication pipe. On MacOSX, the ReadThread exits when it receives a 0 return value from the read due to EOF. On Linux the read returns -1 and sets errno to EIO error, this does not currently cause the thread to shutdown so it continues to read from the comm. In Communication::ReadThread I added a handler for eConnectionStatusError to disconnect and shutdown the thread.
Change by Alex Pepper.
llvm-svn: 216194
inside classes as static local variables and remove the static
ivars. Subclasses should use the accessor functions."
This change moved global statics to function local statics, but
forgot to make the locals static in the function, breaking all
platforms. Furthermore, MSVC doesn't support thread-safe function
local statics, so any use of a function local static on non
primitive types is undefined behavior on MSVC.
Reverting due to the fact that it's broken on all platforms, but
would like to have a discussion about the thread-safety issue
before it goes back in.
llvm-svn: 216123
What it does:
- it introduces a concept of EncodingToType to the ObjCLanguageRuntime
The ObjC runtime has a "type encoding" feature that describes types as strings
The EncodingToType is a decoder for that format, making types out of type encoding strings
This feature already existed in some shape as we were using it to create method signatures out of the runtime, but this checkin extends the parser to support the full syntax, and moves things so that more parts of LLDB have access to this decoder
- it splits the ClassDescriptorV2 object to its own file, it was starting to grow too large
- it adds to the ClassDescriptor mechanism a notion of ivar storage; the ObjC runtime vends ivar information as well as method information
While ivar information is not ready for prime type (i.e. we don't want to add it to the runtime generated types for expression evaluator usage), there are potentially useful scenarios in which realizing ivar types could be useful. For now, the ClassDescriptor is going to hold ivar information directly. Existing code already allows describing ivars, this patch hooks those moving parts up so that one can actually ask a ClassDescriptor about ivars for the class it represents
and as a couple minor niceties:
- it makes it possible to retrieve the LLDB ClangASTContext that is associated to a clang::ASTContext
- it extends the ValueObject-to-ClassDescriptor API in the language runtime to deal correctly with base-class hierarchies
llvm-svn: 216026
This change modifies the 'process launch' --disable-aslr option to take a boolean argument. If the user directly specifies --disable-aslr {true,false}, that setting will control whether the process is launched with ASLR disabled accordingly. In the event that the setting is not explicitly made on the process launch command line, then the value is retrieved from the target.disable-aslr setting (i.e. settings show target.disable-aslr).
llvm-svn: 215996
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
Previously lldbHost was built as multiple static libraries such as
lldbHostCommon, lldbHostLinux, etc. With this patch, the CMake
build produces only a single static library, lldbHost, whose file
set is dynamically created based on the platform.
llvm-svn: 215792
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
Fixes include:
1 - added new FileSpec method: bool FileSpec::Readable()
2 - detect when an executable is not readable and give an appropriate error for:
(lldb) file /tmp/unreadablefile
3 - detect when a core file is not readable and give an appropriate error
4 - detect when a specified core file doesn't exist and give an appropriate error
<rdar://problem/17727734>
llvm-svn: 215741
The documentation says that these fields should be generated when
we have proper process or target file. Current implementation did not
check for this. Eclipse seem to use list-thread-group command even
before setting the executable in which case current implementation
can return garbage data.
llvm-svn: 215658
Previously it was using run command which did not set the process
pointer in the sessionInfo. This commit also sends the proper
out-of-band data.
llvm-svn: 215656
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
Many of the test executables use pthreads directly. This isn't
portable on Windows, so this patch converts these test to use
C++11 threads and mutexes. Since Windows' implementation of
std::thread classes throw and catch from header files, this patch
also disables exceptions when compiling with clang on Windows.
Reviewed by: Todd Fiala, Ed Maste
Differential Revision: http://reviews.llvm.org/D4816
llvm-svn: 215562
i386 eh_frame register numbering, encoding a darwin-specific
bug in the register numbering. Update the definitions to be
the correct values, Darwin can use the register numbers from
debugserver. Patch from Tong Shen.
llvm-svn: 215488
% lldb -x /bin/ls
(lldb) r
(lldb) r
Prior to this fix the first time it would run /usr/bin/arch with "-arch x86_64" the first time and succeed, and fail the second when the target had updated its architecture to x86_64h. We can't specify x86_64h to /usr/bin/arch, it doesn't handle it.
Also fixed it so /usr/bin/arch is only used for Apple triples.
<rdar://problem/17951312>
llvm-svn: 215475
Added llgs/debugserver gdb-remote tests around SIGABRT and SIGSEGV signal reception
notification. Found a few bugs in exception signal handling in Linux llgs. Fixed those.
llvm-svn: 215458
MinGW32 and Cygwin have been removed from the OSType enumeration. They are
represented as environments, and the OS is Windows in both of those cases.
Simply remove the value from the switch.
llvm-svn: 215304
from Python. If you don't need to refer to the result in another expression, there's no
need to bloat the persistent variable table with them since you already have the result
SBValue to work with.
<rdar://problem/17963645>
llvm-svn: 215244
in all but one of the AllocatedBlocks that matched the requested permissions.
Over time this would make the performance of expressions slow down considerably.
Also added a little bit of logging that was helpful in resolving the issue.
<rdar://problem/17954438>
llvm-svn: 215239
- Can now load an executable directly as an argument.
- Fixes towards supporting local debugging.
- Fixes for stack-list-arguments, data-evaluate-expression, environment-cd, stack-list-locals, interpreter-exec.
- Fix breakpoint event handling.
- Support dynamic loading of libraries using the search paths provided by Eclipse.
llvm-svn: 215223
The select() API on Windows is not compatible with objects other
than sockets, so passing a descriptor for the command pipe to this
function is guaranteed to fail. ConnectionFileDescriptor is still
broken on Windows after this patch, but slightly less broken than
before.
llvm-svn: 215172
This patch adds the notion of a "path syntax" to FileSpec. There
are two syntaxes (Posix and Windows) and one "meta syntax",
Host Native, which uses the current platform to figure out the
appropriate syntax for host paths.
This allows paths from one platform to be represented and
manipulated on another platform even if they have different path
syntaxes.
llvm-svn: 215123
This patch moves the logic of many common socket operations into
its own class lldb_private::Socket. It then modifies the
ConnectionFileDescriptor class, and a few users of that class,
to use this new Socket class instead of hardcoding socket logic
directly.
Finally, this patch creates a common interface called IOObject for
any objects that support reading and writing, so that endpoints
such as sockets and files can be treated the same.
Differential Revision: http://reviews.llvm.org/D4641
Reviewed by: Todd Fiala, Greg Clayton
llvm-svn: 214984
the same parent frame, but different current frame - e.g. when
you step past a tail call exit from a function. Apply the same
"avoid-no-debug" rules to this case as for a "step-in".
<rdar://problem/16189225>
llvm-svn: 214946
Keno Fischer