This is a follow up to the rL330983. The patch teaches ld, sd, and lld
commands accept 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`. In fact, these commands should accept 64-bit offsets,
but so large offsets require another command expanding and will be
supported by a separate patch.
Differential Revision: https://reviews.llvm.org/D46629
llvm-svn: 331997
This is a follow up to the rL330983. The patch teaches lh and lhu
commands accepts 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`.
Differential Revision: https://reviews.llvm.org/D46513
llvm-svn: 331996
And eliminatw the duplication of those instructions for microMIPS32r6.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D46117
llvm-svn: 331526
Previously these instructions were unselectable and instead were generated
through the instruction mapping tables.
Reviewers: atanasyan, smaksimovic, abeserminji
Differential Revision: https://reviews.llvm.org/D46055
llvm-svn: 331165
`lb` and `lbu` commands accepts 16-bit signed offsets. But GAS accepts
larger offsets for these commands. If an offset does not fit in 16-bit
range, `lb` command is translated into lui/lb or lui/addu/lb series.
It's interesting that initially LLVM assembler supported this feature,
but later it was broken.
This patch restores support for 32-bit offsets. It replaces `mem_simm16`
operand for `LB` and `LBu` definitions by the new `mem_simmptr` operand.
This operand is intended to check that offset fits to the same size as
using for pointers. Later we will be able to extend this rule and
accepts 64-bit offsets when it is possible.
Some issues remain:
- The regression also affects LD, SD, LH, LHU commands. I'm going
to fix them by a separate patch.
- GAS accepts any 32-bit values as an offset. Now LLVM accepts signed
16-bit values and this patch extends the range to signed 32-bit offsets.
In other words, the following code accepted by GAS and still triggers
an error by LLVM:
```
lb $4, 0x80000004
# gas
lui a0, 0x8000
lb a0, 4(a0)
```
- In case of 64-bit pointers GAS accepts a 64-bit offset and translates
it to the li/dsll/lb series of commands. LLVM still rejects it.
Probably this feature has never been implemented in LLVM. This issue
is for a separate patch.
```
lb $4, 0x800000001
# gas
li a0, 0x8000
dsll a0, a0, 0x14
lb a0, 4(a0)
```
Differential Revision: https://reviews.llvm.org/D45020
llvm-svn: 330983
Correct the definitions of ei, di, eret, deret, wait, syscall and break.
Also provide microMIPS specific aliases to match the MIPS aliases.
Additionally correct the definition of the wait instruction so that
it is present in the instruction mapping tables.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D45939
llvm-svn: 330952
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
This patch relands r327409, hopefully without the problematic part of the
tests that cause FileCheck to assert on the windows expensive checks bot.
llvm-svn: 330741
Current code does not check that a register number is in the 0-31 range.
Sometimes the parser checks that later for some kinds of instructions,
but that leads to unclear / incorrect error messages like that:
% cat test.s
.text
lb $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
test.s:2:10: error: expected memory with 16-bit signed offset
lb $4, 8($32)
^
Sometimes the parser just crashes:
% cat test.s
.text
lw $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
This patch resolves the problem by checking that register number after
'$' sign is in the 0-31 range. If the number is out of the range the
parser shows the `invalid register number` error, but treats invalid
register number as a normal one to continue parsing and catch other
possible errors.
Differential Revision: https://reviews.llvm.org/D45919
llvm-svn: 330732
On Hexagon "x = y" is a syntax used in most instructions, and is not
treated as a directive.
Differential Revision: https://reviews.llvm.org/D44256
llvm-svn: 328635
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
llvm-svn: 327409
These instructions are defined as taking a GPR register and a
coprocessor register for ISAs up to MIPS32. MIPS32 extended the
definition to allow a selector--a value from 0 to 32--to access
another register.
These instructions are now internally defined as being MIPS-I
instructions, but are rejected for pre-MIPS32 ISA's if they have
an explicit selector which is non-zero. This deviates slightly from
GAS's behaviour which rejects assembly instructions with an
explicit selector for pre-MIPS32 ISAs.
E.g:
mfc0 $4, $5, 0
is rejected by GAS for MIPS-I to MIPS-V but will be accepted
with this patch for MIPS-I to MIPS-V.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41662
llvm-svn: 326890
An upcoming patch D41434, changes the ordering of the matcher table
for assembly. This patch corrects the definition of the normal MIPS
cvt.d.w not to be available in microMIPS.
llvm-svn: 325589
Instructions affected:
mthc1, mfhc1, add.d, sub.d, mul.d, div.d,
mov.d, neg.d, cvt.w.d, cvt.d.s, cvt.d.w, cvt.s.d
These instructions are now defined for
microMIPS32r3 + microMIPS32r6 in MicroMipsInstrFPU.td
since they shared their encoding with those already defined
in microMIPS32r6InstrInfo.td and have been therefore
removed from the latter file.
Some instructions present in MicroMipsInstrFPU.td which
did not have both AFGR64 and FGR64 variants defined have
been altered to do so.
Differential revision: https://reviews.llvm.org/D42738
llvm-svn: 324584
- Alter abs for micromips to have both AFGR64 and FGR64
variants, same as sqrt
- Remove sqrt and abs from MicroMips32r6InstrInfo.td,
use micromips FGR64 variants
- Restrict non-micromips abs/sqrt with NotInMicroMips
predicate
Differential revision: https://reviews.llvm.org/D41439
llvm-svn: 323184
During the review of D40362 I spotted that this test wasn't actually
testing the eva instructions due to '-mattr==eva', rather than '-mattr=+eva',
which resulted in test having no effect.
llvm-svn: 321273
This patch resubmits the SVE ZIP1/ZIP2 patch series consisting of
of r320992, r320986, r320973, and r320970 by reverting
https://reviews.llvm.org/rL321024.
The issue that caused r321024 has been addressed in https://reviews.llvm.org/rL321158,
so this patch-series should be safe to resubmit.
llvm-svn: 321163
This reverts changes r320992, r320986, r320973, and r320970.
r320970 by itself breaks the test case, and the rest depend on it.
Test case will land soon.
llvm-svn: 321024
Summary:
When emitting a diagnostic for an invalid operand, a specific diagnostic
should only be reported when the instruction being matched is actually
enabled by the feature flags.
Patch [3/4] in a series to add parsing of predicates and properly parse SVE
ZIP1/ZIP2 instructions. This patch fixes bogus diagnostic messages for when
the SVE feature is not specified.
Reviewers: rengolin, craig.topper, olista01, sdardis, stoklund
Reviewed By: olista01, sdardis
Subscribers: fhahn, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40362
llvm-svn: 320986
All files and parts of files related to microMIPS4R6 are removed.
When target is microMIPS4R6, errors are printed.
This is LLVM part of patch.
Differential Revision: https://reviews.llvm.org/D35625
llvm-svn: 320350
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
This patch fixes an issue where microMIPS ASE flag is not set
when a function has micromips attribute or when .set micromips
directive is used.
Differential Revision: https://reviews.llvm.org/D40316
llvm-svn: 318948
This adjusts the tests to hopfully pacify the
llvm-clang-x86_64-expensive-checks-win buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 318207
Correct the definition of 'j' as being unavailable for microMIPS32R6 and
provide the 'b' assembly idiom for codegen purposes for microMIPS32r3.
Provide the necessary 'br' pattern for microMIPS32R6 as it now longer
incorrectly uses the 'j' instruction.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39741
llvm-svn: 317801
Previously, the 'movep' instruction was defined for microMIPS32r3 and
shared that definition with microMIPS32R6. 'movep' was re-encoded for
microMIPS32r6, so this patch provides the correct encoding.
Secondly, correct the encoding of the 'rs' and 'rt' operands which have
an instruction specific encoding for the registers those operands accept.
Finally, correct the decoding of the 'dst_regs' operand which was extracting
the relevant field from the instruction, but was actually extracting the
field from the alreadly extracted field.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39495
llvm-svn: 317475
Mark all symbols involved with TLS relocations as being TLS symbols.
This resolves PR35140.
Thanks to Alex Crichton for reporting the issue!
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39591
llvm-svn: 317470
Simon Dardis