This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
llvm-svn: 288029
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
llvm-svn: 288028
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
llvm-svn: 286587
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
llvm-svn: 286586
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
llvm-svn: 286585
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
llvm-svn: 286284
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
llvm-svn: 286283
Define a couple of additional semantic classes and use them
throughout the .td files to make them more consistent and
more easily readable.
No functional change.
llvm-svn: 286268
This changes the InstRR (and related) patterns to no longer
automatically add an "r" at the end of the mnemonic. This
makes the .td files more obviously understandable, and also
allows using the patterns for those few instructions that
do not follow the *r scheme.
Also add some more sub-formats of the RRF format class, to
match operand names and sequence from the PoP better.
No functional change.
llvm-svn: 286267
Now that we've added instruction format subclasses like
InstRIb, it makes sense to rename the old InstRI to InstRIa.
Similar for InstRX, InstRXY, InstRS, InstRSY, and InstSS.
No functional change.
llvm-svn: 286266
Rework patterns for branches, call & return instructions,
compare-and-branch, compare-and-trap, and conditional move
instructions.
In particular, simplify creation of patterns for the extended
opcodes of instructions that take a CC mask.
Also, use semantical instruction classes for all the instructions
instead of open-coding them in SystemZInstrInfo.td.
Adds a couple of the basic branch instructions (that are unused
for codegen) for the assembler/disassembler.
llvm-svn: 286263
LLVM currently treats the first operand of MVCK as if it were a
regular base+index+displacement address. However, it is in fact
a base+displacement combined with a length register field.
While the two might look syntactically similar, there are two
semantic differences:
- %r0 is a valid length register, even though it cannot be used
as an index register.
- In an expression with just a single register like 0(%rX), the
register is treated as base with normal addresses, while it is
treated as the length register (with an empty base) for MVCK.
Fixed by adding a new operand parser class BDRAddr and reworking
the assembler parser to distinguish between address + length
register operands and regular addresses.
llvm-svn: 285574
Post-RA sched strategy and scheduling instruction annotations for z196, zEC12
and z13.
This scheduler optimizes decoder grouping and balances processor resources
(including side steering the FPd unit instructions).
The SystemZHazardRecognizer keeps track of the scheduling state, which can
be dumped with -debug-only=misched.
Reviers: Ulrich Weigand, Andrew Trick.
https://reviews.llvm.org/D17260
llvm-svn: 284704
The change in r279105 causes an infinite loop in some cases, as it sets the upper bits of an AND mask constant, which DAGCombiner::SimplifyDemandedBits then unsets.
This patch reverts that part of the behaviour, instead relying on .td peepholes to perform the transformation to NILL. I reapplied my original fix for the problem addressed by r279105 (unsetting the upper bits, which prevents a compiler abort for a different reason).
Differential Revision: https://reviews.llvm.org/D23781
llvm-svn: 279515
Normally, when an AND with a constant is lowered to NILL, the constant value is truncated to 16 bits. However, since r274066, ANDs whose results are used in a shift are caught by a different pattern that does not truncate. The instruction printer expects a 16-bit unsigned immediate operand for NILL, so this results in an abort.
This patch adds code to manually truncate the constant in this situation. The rest of the bits are then set, so we will detect a case for NILL "naturally" rather than using peephole optimizations.
Differential Revision: http://reviews.llvm.org/D21854
llvm-svn: 279105
Summary:
Add support for the .insn directive.
.insn is an s390 specific directive that allows encoding of an instruction
instead of using a mnemonic. The motivating case is some code in node.js that
requires support for the .insn directive.
Reviewers: koriakin, uweigand
Subscribers: koriakin, llvm-commits
Differential Revision: https://reviews.llvm.org/D21809
llvm-svn: 278012
Summary:
Add instruction formats E, RSI, SSd, SSE, and SSF.
Added BRXH, BRXLE, PR, MVCK, STRAG, and ECTG instructions to test out
those formats.
Reviewers: uweigand
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23179
llvm-svn: 277822
Summary: Add support for the z13 instructions LOCHI and LOCGHI which
conditionally load immediate values. Add target instruction info hooks so
that if conversion will allow predication of LHI/LGHI.
Author: RolandF
Reviewers: uweigand
Subscribers: zhanjunl
Commiting on behalf of Roland.
Differential Revision: http://reviews.llvm.org/D22117
llvm-svn: 275086
Summary: SystemZ shift instructions only use the last 6 bits of the shift
amount. When the result of an AND operation is used as a shift amount, this
means that we can use the NILL instruction (which operates on the last 16 bits)
rather than NILF (which operates on the last 32 bits) for a 16-bit savings in
instruction size.
Reviewers: uweigand
Subscribers: llvm-commits
Author: colpell
Committing on behalf of Elliot.
Differential Revision: http://reviews.llvm.org/D21686
llvm-svn: 274066
Summary:
Created a pattern to match 64-bit mode (and (xor x, -1), y)
to a shorter sequence of instructions.
Before the change, the canonical form is translated to:
xihf %r3, 4294967295
xilf %r3, 4294967295
ngr %r2, %r3
After the change, the canonical form is translated to:
ngr %r3, %r2
xgr %r2, %r3
Reviewers: zhanjunl, uweigand
Subscribers: llvm-commits
Author: assem
Committing on behalf of Assem.
Differential Revision: http://reviews.llvm.org/D21693
llvm-svn: 273887
Support and generate Compare and Traps like CRT, CIT, etc.
Support Trap as legal DAG opcodes and generate "j .+2" for them by default.
Add support for Conditional Traps and use the If Converter to convert them into
the corresponding compare and trap opcodes.
Differential Revision: http://reviews.llvm.org/D21155
llvm-svn: 272419
Summary: On Linux, /usr/include/bits/byteswap-16.h defines __byteswap_16(x) as an inlined LRVH (Load Reversed Half-word) instruction. The SystemZ back-end did not support this opcode and the inlined assembly would cause a fatal error.
Reviewers: bryanpkc, uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18732
llvm-svn: 269688
Added support for extended mnemonics for the following branch instructions and
load/store-on-condition opcodes:
BR, LOCR, LOCGR, LOC, LOCG, STOC, STOCG
Phabricator: http://reviews.llvm.org/D19729
Committing on behalf of Zhan Liau
llvm-svn: 269106
This adds a conditional variant of CallBR instruction, CallBCR. Also,
it can be fused with integer comparisons, resulting in one of the new
C*BCall instructions.
In addition to CallBRCL limitations, this has another one: it won't
trigger if the function to call isn't already in %r1 - see f22 in the
test for an example (it's also why the loads in tests are volatile).
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18928
llvm-svn: 265933
These are fused compare-and-branches, so they obviously don't use CC.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18927
llvm-svn: 265932
This adds a conditional variant of CallJG instruction, CallBRCL.
It can be used for conditional sibling calls. Unfortunately, due
to IfCvt limitations, it only really works well for functions without
arguments.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18864
llvm-svn: 265814
Return is now considered a predicable instruction, and is converted
to a newly-added CondReturn (which maps to BCR to %r14) instruction by
the if conversion pass.
Also, fused compare-and-branch transform knows about conditional
returns, emitting the proper fused instructions for them.
This transform triggers on a *lot* of tests, hence the huge diffstat.
The changes are mostly jX to br %r14 -> bXr %r14.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D17339
llvm-svn: 265689
This adds MC support for fused compare + indirect branch instructions,
ie. CRB, CGRB, CLRB, CLGRB, CIB, CGIB, CLIB, CLGIB. They aren't actually
generated yet -- this is preparation for their use for conditional
returns in the next iteration of D17339.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18742
llvm-svn: 265296
A cross-thread sequentially consistent fence should be lowered into
z/Architecture's BCR serialization instruction, instead of causing a
fatal error in the back-end.
Author: bryanpkc
Differential Revision: http://reviews.llvm.org/D18644
llvm-svn: 265292
For compatability with GAS, nop and nopr are recognized as alises for
bc and bcr, respectively. A mask of 0 turns these instructions
effectively into no-operations.
Reviewed by Ulrich Weigand.
llvm-svn: 264875
Some instructions were missing isBranch, isCall, or isTerminator
flags. This didn't really affect code generation since most of
the affected patterns were used only for the AsmParser and/or
disassembler.
However, it could affect tools using the MC layer to disassemble
and parse binary code (e.g. via MCInstrDesc::mayAffectControlFlow).
llvm-svn: 263478
Serialize will perform a hardware serialization operation, and is
acting as a memory barrier. Therefore it must have the hasSideEffects
flag set so it will be treated as a global memory object.
Reviewed by Ulrich Weigand
llvm-svn: 257036
This was discovered to be necessary while running memchr-01.ll with
-verify-machinstrs, because it is not allowed to have a phys reg live
accross block boundaries while on SSA form, if the register is
allocatable (expect in entry block and landing pads).
In this test case, stringRRE pseudos are expanded after isel by adding
a loop block which produces a live out CC register. To make the test
pass, it was also necessary to not say that StringRRELoop pseudo uses
R0L, this is only true for the StringRRE opcode.
-verify-machineinstrs added to memchr-01.ll test.
New test case int-cmp-51.ll to test that MachineCSE can eliminate
an identical compare (which it couldn't do before).
Reviewed by Ulrich Weigand
llvm-svn: 251634
LLCH, LLHH and CLIH had the wrong register classes for the def-operand.
Tie operands if changing opcode to an instruction with tied ops.
Comment typo fix.
These fixes were needed in order to make regression test case
SystemZ/asm-18.ll pass with -verify-machineinstrs (not used by
default).
Reviewed by Ulrich Weigand.
llvm-svn: 249811
So far, we do not yet support any instruction specific to zEC12.
Most of the facilities added with zEC12 are indeed not very useful
to compiler code generation, but there is one exception: the
miscellaneous-extensions facility provides the RISBGN instruction,
which is a variant of RISBG that does not set the condition code.
Add support for this facility, MC support for RISBGN, and CodeGen
support for prefering RISBGN over RISBG on zEC12, unless we can
actually make use of the condition code set by RISBG.
llvm-svn: 233690
We already exploit a number of instructions specific to z196,
but not yet POPCNT. Add support for the population-count
facility, MC support for the POPCNT instruction, CodeGen
support for using POPCNT, and implement the getPopcntSupport
TargetTransformInfo hook.
llvm-svn: 233689
The current SystemZ back-end only supports the local-exec TLS access model.
This patch adds all required CodeGen support for the other TLS models, which
means in particular:
- Expand initial-exec TLS accesses by loading TLS offsets from the GOT
using @indntpoff relocations.
- Expand general-dynamic and local-dynamic accesses by generating the
appropriate calls to __tls_get_offset. Note that this routine has
a non-standard ABI and requires loading the GOT pointer into %r12,
so the patch also adds support for the GLOBAL_OFFSET_TABLE ISD node.
- Add a new platform-specific optimization pass to remove redundant
__tls_get_offset calls in the local-dynamic model (modeled after
the corresponding X86 pass).
- Add test cases verifying all access models and optimizations.
llvm-svn: 229654
The current SystemZ back-end only supports the local-exec TLS access model.
This patch adds all required MC support for the other TLS models, which
means in particular:
- Support additional relocation types for
Initial-exec model: R_390_TLS_IEENT
Local-dynamic-model: R_390_TLS_LDO32, R_390_TLS_LDO64,
R_390_TLS_LDM32, R_390_TLS_LDM64, R_390_TLS_LDCALL
General-dynamic model: R_390_TLS_GD32, R_390_TLS_GD64, R_390_TLS_GDCALL
- Support assembler syntax to generate additional relocations
for use with __tls_get_offset calls:
:tls_gdcall:
:tls_ldcall:
The patch also adds a new test to verify fixups and relocations,
and removes the (already unused) FK_390_PLT16DBL/FK_390_PLT32DBL
fixup kinds.
llvm-svn: 229652
There's no real need to have Shift as a separate format type from Binary.
The comments for other format types were too specific and in some cases
no longer accurate.
Just a clean-up, no behavioral change intended.
llvm-svn: 212707
Immediate fields that have no natural MVT type tended to use i8 if the
field was small enough. This was a bit confusing since i8 isn't a legal
type for the target. Fields for short immediates in a 32-bit or 64-bit
operation use i32 or i64 instead, so it would be better to do the same
for all fields.
No behavioral change intended.
llvm-svn: 212702
...instead of a separate Requires for each one. This style was already
used in some places and seems more compact.
No behavioral change intended.
llvm-svn: 204452