Currently, YAML has the following syntax for describing the symbols:
Symbols:
Local:
LocalSymbol1:
...
LocalSymbol2:
...
...
Global:
GlobalSymbol1:
...
Weak:
...
GNUUnique:
I.e. symbols are grouped by their bindings. That is not very convenient,
because:
It does not allow to set a custom binding, what can be useful for producing
broken/special outputs for test cases. Adding a new binding would require to
change a syntax (what we observed when added GNUUnique recently).
It does not allow to change the order of the symbols in .symtab/.dynsym,
i.e. currently all Local symbols are placed first, then Global, Weak and GNUUnique
are following, but we are not able to change the order.
It is not consistent. Binding is just one of the properties of the symbol,
we do not group them by other properties.
It makes the code more complex that it can be. This patch shows it can be simplified
with the change performed.
The patch changes the syntax to just:
Symbols:
Symbol1:
...
Symbol2:
...
...
With that, we are able to work with the binding field just like with any other symbol property.
Differential revision: https://reviews.llvm.org/D60122
llvm-svn: 357595
Summary: Currently, `llvm-readobj` do not support GNU style dumper for symbol versioning sections. In this patch, I would like to implement dumper for `.gnu.version` section
Reviewers: jhenderson, rupprecht, grimar
Reviewed By: jhenderson, rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59877
llvm-svn: 357578
GNU nm has --no-demangle, so llvm-nm should too. It disables the
--demangle switch. The patch also allows --demangle to be specified
multiple times (the last of all --no-demangle/--demangle switches
takes precedence).
Reviewed by: grimar, rupprecht, mattd
Differential Revision: https://reviews.llvm.org/D60134
llvm-svn: 357575
Summary:
Some flags accepted by --set-section-flags and --rename-section can change a SHT_NOBITS section to a SHT_PROGBITS section. Note that none of them can change a SHT_PROGBITS to SHT_NOBITS.
The full list (found via experimentation of individually setting each flag) that does this is: contents, load, noload, code, data, rom, and debug.
This was found by testing llvm-objcopy with the gnu binutils test suite, specifically this test case: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob;f=binutils/testsuite/binutils-all/copy-1.d;h=f2b0d9e90df738c2891b4d5c7b62f62894b556ca;hb=HEAD
Reviewers: jhenderson, grimar, jakehehrlich, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59958
llvm-svn: 357492
This patch fixes https://bugs.llvm.org/show_bug.cgi?id=41293 and
https://bugs.llvm.org/show_bug.cgi?id=41045. llvm-objcopy assumed that
it could always read a section header string table. This isn't the case
when the sections were previously all stripped, and the e_shstrndx field
was set to 0. This patch fixes this. It also fixes a double space in an
error message relating to this issue, and prevents llvm-objcopy from
adding extra space for non-existent section headers, meaning that
--strip-sections on the output of a previous --strip-sections run
produces identical output, simplifying the test.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59989
llvm-svn: 357475
Summary:
This patch adds the code needed to parse a minidump file into the
MinidumpYAML model, and the necessary glue code so that obj2yaml can
recognise the minidump files and process them.
Reviewers: jhenderson, zturner, clayborg
Subscribers: mgorny, lldb-commits, amccarth, markmentovai, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59634
llvm-svn: 357469
Summary: Support reading notes that don't have a standard note name.
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59969
llvm-svn: 357271
This patch adds an experimental stage named MicroOpQueueStage.
MicroOpQueueStage can be used to simulate a hardware micro-op queue (basically,
a decoupling queue between 'decode' and 'dispatch'). Users can specify a queue
size, as well as a optional MaxIPC (which - in the absence of a "Decoders" stage
- can be used to simulate a different throughput from the decoders).
This stage is added to the default pipeline between the EntryStage and the
DispatchStage only if PipelineOption::MicroOpQueue is different than zero. By
default, llvm-mca sets PipelineOption::MicroOpQueue to the value of hidden flag
-micro-op-queue-size.
Throughput from the decoder can be simulated via another hidden flag named
-decoder-throughput. That flag allows us to quickly experiment with different
frontend throughputs. For targets that declare a loop buffer, flag
-decoder-throughput allows users to do multiple runs, each time simulating a
different throughput from the decoders.
This stage can/will be extended in future. For example, we could add a "buffer
full" event to notify bottlenecks caused by backpressure. flag
-decoder-throughput would probably go away if in future we delegate to another
stage (DecoderStage?) the simulation of a (potentially variable) throughput from
the decoders. For now, flag -decoder-throughput is "good enough" to run some
simple experiments.
Differential Revision: https://reviews.llvm.org/D59928
llvm-svn: 357248
The majority of the printRelocation and printDynamicRelocation functions
were identical. This patch factors this all out into a new function.
There are a couple of minor differences to do with printing of symbols
without names, but I think these are harmless, and in some cases a small
improvement.
Reviewed by: grimar, rupprecht, Higuoxing
Differential Revision: https://reviews.llvm.org/D59823
llvm-svn: 357246
Essentially echo "" | yaml2obj crashes. This patch attempts to trim whitespace
and determine if the yaml string in the file is empty or not. If the input is
empty then it will not properly print out an error message and return an error
code.
Differential Revision: https://reviews.llvm.org/D59964
A test/tools/yaml2obj/empty.yaml
M tools/yaml2obj/yaml2obj.cpp
llvm-svn: 357219
Based on llvm-exegesis measurements.
Now that llvm-exegesis is ~2 magnitudes faster, and is a bit smarter,
it is now possible to continue cleanup of the scheduler model.
With this, there are no more latency inconsistencies for the
opcodes that produce stable measurements, and only a few inconsistencies
for unstable measurements (MMX_* opcodes, opcodes that llvm-exegesis
measures by chaining - CMP, TEST, BT, SETcc, CVT, MOV, etc.)
llvm-svn: 357169
Summary:
This is an alternative to D59539.
Let's suppose we have measured 4 different opcodes, and got: `0.5`, `1.0`, `1.5`, `2.0`.
Let's suppose we are using `-analysis-clustering-epsilon=0.5`.
By default now we will start processing the `0.5` point, find that `1.0` is it's neighbor, add them to a new cluster.
Then we will notice that `1.5` is a neighbor of `1.0` and add it to that same cluster.
Then we will notice that `2.0` is a neighbor of `1.5` and add it to that same cluster.
So all these points ended up in the same cluster.
This may or may not be a correct implementation of dbscan clustering algorithm.
But this is rather horribly broken for the reasons of comparing the clusters with the LLVM sched data.
Let's suppose all those opcodes are currently in the same sched cluster.
If i specify `-analysis-inconsistency-epsilon=0.5`, then no matter
the LLVM values this cluster will **never** match the LLVM values,
and thus this cluster will **always** be displayed as inconsistent.
The solution is obviously to split off some of these opcodes into different sched cluster.
But how do i do that? Out of 4 opcodes displayed in the inconsistency report,
which ones are the "bad ones"? Which ones are the most different from the checked-in data?
I'd need to go in to the `.yaml` and look it up manually.
The trivial solution is to, when creating clusters, don't use the full dbscan algorithm,
but instead "pick some unclustered point, pick all unclustered points that are it's neighbor,
put them all into a new cluster, repeat". And just so as it happens, we can arrive
at that algorithm by not performing the "add neighbors of a neighbor to the cluster" step.
But that won't work well once we teach analyze mode to operate in on-1D mode
(i.e. on more than a single measurement type at a time), because the clustering would
depend on the order of the measurements.
Instead, let's just create a single cluster per opcode, and put all the points of that opcode into said cluster.
And simultaneously check that every point in that cluster is a neighbor of every other point in the cluster,
and if they are not, the cluster (==opcode) is unstable.
This is //yet another// step to bring me closer to being able to continue cleanup of bdver2 sched model..
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=40880 | PR40880 ]].
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: tschuett, jdoerfert, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59820
llvm-svn: 357152
Summary:
Follow-up for D56743.
* Add more "--" in llvm-rc invocations.
* Add llvm-rc to the tools list. This uses full path to llvm-rc in test
RUN lines (llvm-lit -v), making them copy-pasteable.
Reviewers: mstorsjo, zturner
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59858
llvm-svn: 357118
This reverts commit rL357020.
The commit broke the test llvm/test/tools/llvm-objdump/embedded-source.test
on some builds including clang-ppc64be-linux-multistage,
clang-s390x-linux, clang-with-lto-ubuntu, clang-x64-windows-msvc,
llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast (and others).
llvm-svn: 357026
Reapply rL356941 after regenerating the object file in the failing test
llvm/test/tools/llvm-objdump/embedded-source.test from source.
Original commit message:
[llvm] Prevent duplicate files in debug line header in dwarf 5.
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 357018
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=40007.
Idea is to swap the order of stripping. So that we strip sections before
symbols what allows us to strip relocation sections without emitting
the error about relative symbols.
Differential revision: https://reviews.llvm.org/D59763
llvm-svn: 357017
Summary:
This prevents "Cannot encode high byte register in REX-prefixed instruction"
from happening on instructions that require REX encoding when AH & co
get selected.
On the down side, these 4 registers can no longer be selected
automatically, but this avoids having to expose all the X86 encoding
complexity.
Reviewers: gchatelet
Subscribers: tschuett, jdoerfert, llvm-commits, bdb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59821
llvm-svn: 357003
This makes GNU binutils not reject the libraries outright.
GNU ld handles weak externals slightly differently though, so it
can't use them for aliases in import libraries, but this makes GNU
ld able to use the rest of the import libraries.
LLD accepted object files with machine type 0 aka
IMAGE_FILE_MACHINE_UNKNOWN.
Differential Revision: https://reviews.llvm.org/D59742
llvm-svn: 356982
Summary:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Reviewers: dblaikie, probinson, aprantl, espindola
Reviewed By: probinson
Subscribers: emaste, jvesely, nhaehnle, aprantl, javed.absar, arichardson, hiraditya, MaskRay, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 356941
llvm-objcopy previously knew nothing about data in segments that wasn't
covered by section headers, meaning that it wrote zeroes instead of what
was there. As it is possible for this data to be useful to the loader,
this patch causes llvm-objcopy to start preserving this data. Data in
sections that are explicitly removed continues to be written as zeroes.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41005.
Reviewed by: jakehehrlich, rupprecht
Differential Revision: https://reviews.llvm.org/D59483
llvm-svn: 356919
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: jhenderson, rupprecht
Subscribers: ormris, dyung, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356881
Fix: r356853 + set AddressAlign to 4 in
Inputs/compress-debug-sections.yaml for the new group section introduced.
Original commit message:
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356856
This patch fixes the reason of ubsan failure (UB detected)
happened after landing the D59638 (I had to revert it).
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap-ubsan/builds/11760/steps/check-llvm%20ubsan/logs/stdio)
Problem is the following. Our implementation of GroupSection assumes that
its address is 4 bytes aligned when writes it:
template <class ELFT>
void ELFSectionWriter<ELFT>::visit(const GroupSection &Sec) {
ELF::Elf32_Word *Buf =
reinterpret_cast<ELF::Elf32_Word *>(Out.getBufferStart() + Sec.Offset);
...
But the test case for D59638 did not set AddressAlign in YAML. So address was
not 4 bytes aligned since Sec.Offset was odd. That triggered the issue.
This patch teaches llvm-objcopy to report an error for such sections (which should
not met in reality), what is better than having UB.
Differential revision: https://reviews.llvm.org/D59695
llvm-svn: 356853
This reverts commit 94a0cffe25 (r356764).
This change was originally committed in r356764, but then partially
reverted in r356777 due to "bad changes". This caused test failures
because the test changes committed along with the original change
were not reverted, so this change reverts the rest of the changes.
llvm-svn: 356811
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356764
Summary:
This patch adds the ability to read a yaml form of a minidump file and
write it out as binary. Apart from the minidump header and the stream
directory, only three basic stream kinds are supported:
- Text: This kind is used for streams which contain textual data. This
is typically the contents of a /proc file on linux (e.g.
/proc/PID/maps). In this case, we just put the raw stream contents
into the yaml.
- SystemInfo: This stream contains various bits of information about the
host system in binary form. We expose the data in a structured form.
- Raw: This kind is used as a fallback when we don't have any special
knowledge about the stream. In this case, we just print the stream
contents in hex.
For this code to be really useful, more stream kinds will need to be
added (particularly for things like lists of memory regions and loaded
modules). However, these can be added incrementally.
Reviewers: jhenderson, zturner, clayborg, aprantl
Subscribers: mgorny, lemo, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59482
llvm-svn: 356753
Also fix up a couple of minor issues in the test being updated, where
FileCheck could match on incorrect output and fix the test case order to
match the struct order.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D59691
llvm-svn: 356746
Spec says about the first symbol table entry that index 0 both designates the first entry in the table
and serves as the undefined symbol index. It should have zero value.
Hence the first symbol table entry has no name. And so has to have a st_name == 0.
(http://refspecs.linuxbase.org/elf/gabi4+/ch4.symtab.html)
Currently, we do not emit zero value for the first symbol table entry.
That happens because we add empty strings to the string builder, which
for each such case adds a zero byte:
(https://github.com/llvm-mirror/llvm/blob/master/lib/MC/StringTableBuilder.cpp#L185)
After the string optimization performed it might return non zero indexes for the
empty string requested.
The patch fixes this issue for the case above and other sections with no names.
Differential revision: https://reviews.llvm.org/D59496
llvm-svn: 356739
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356738
GNU objcopy can support output formats like elf32-i386-freebsd and
elf64-x86-64-freebsd. The only difference from their regular non-freebsd
counterparts that I have observed is that the freebsd versions set the
OS/ABI field to ELFOSABI_FREEBSD. This patch sets the OS/ABI field
according based on the format whenever --output-format is specified.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59645
llvm-svn: 356737
Summary:
r354375 added support for most objdump groupings, but didn't add support for -j|--sections, because that wasn't possible.
r354870 added --disassembler options, but grouping still wasn't available.
r355185 supported values for grouped options.
This just puts the three of them together. This supports -j in modes like `-s -j .foo`, `-sj .foo`, `-sj=.foo`, or `-sj.foo`, and similar for `-M`.
Reviewers: ormris, jhenderson, ikudrin
Reviewed By: jhenderson, ikudrin
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59618
llvm-svn: 356697
Summary:
llvm-objdump (via libObject) validates DYLD_INFO rebase and bind
entries against the basic structure found in the Mach-O file before
evaluating the contents of those entries. Certain malformed Mach-Os can
defeat the validation check and force llvm-objdump (libObject) to crash.
The previous logic verified a rebase or bind started in a valid Mach-O
section, but did not verify that the section wholely contained the
fixup. It also generally allows rebases or binds to start immediately
after a valid section even if that range is not itself part of a valid
section. Finally, bind and rebase opcodes that indicate more than one
fixup (apply N times...) are not completely validated: only the first
and final fixups are checked.
The previous logic also rejected certain binaries as false positives.
Some bind and rebase opcodes can modify the state machine such that the
next bind or rebase will fail. libObject will reject these opcodes as
invalid in order to be helpful and print an error message associated
with the instruction that caused the problem, even though the binary is
not actually illegal until it consumes the invalid state in the state
machine. In other words, libObject may reject a Mach-O binary that
Apple's dynamic linker may consider legal. The original version of
macho-rebase-add-addr-uleb-too-big is an example of such a binary.
I have replaced the existing checkSegAndOffset and checkCountAndSkip
functions with a single function, checkSegAndOffsets, which validates
all of the fixups realized by a DYLD_INFO opcode. checkSegAndOffsets
verifies that a Mach-O section fully contains each fixup. Every fixup
realized by an opcode is validated, and some (but not all!)
inconsistencies in the state machine are allowed until a fixup is
realized. This means that libObject may fail on an opcode that realizes
a fixup, not on the opcode that introduced the arithmetic error.
Existing test cases have been modified to reflect the changes in error
messages returned by libObject. What's more, the test case for
macho-rebase-add-addr-uleb-too-big has been modified so that it actually
triggers the error condition; the new code in libObject considers the
original test binary "legal".
rdar://47797757
Reviewers: lhames, pete, ab
Reviewed By: pete
Subscribers: rupprecht, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59574
llvm-svn: 356629
If the compression was used and we had a symbol not involved in relocation,
we never updated its section and it was silently removed from the output.
Differential revision: https://reviews.llvm.org/D59542
llvm-svn: 356554
Summary:
GNU ar supports the 'N' count modifier for the extract (x) and delete (d) operations. When an archive contains multiple members with the same name, this can be used to extract (or delete) them individually. For example:
```
$ llvm-ar t archive.a
foo
foo
$ llvm-ar x archive.a
-> Writes foo twice, overwriting it the second time :( :(
$ llvm-ar xN 1 archive.a foo && mv foo foo.1
$ llvm-ar xN 2 archive.a foo && mv foo foo.2
-> Write foo twice, renaming it in between invocations to preserve all versions
```
Reviewers: ruiu, MaskRay
Reviewed By: ruiu, MaskRay
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59503
llvm-svn: 356466
This fixes the https://bugs.llvm.org/show_bug.cgi?id=40980.
Previously if string optimization occurred as a result of
StringTableBuilder's finalize() method, the size wasn't updated.
This hopefully also makes the interaction between sections during finalization
processes a bit more clear.
Differential revision: https://reviews.llvm.org/D59488
llvm-svn: 356371
Previously we had a regular form of the instruction used when the immediate was 0-7. And _alt form that allowed the full 8 bit immediate. Codegen would always use the 0-7 form since the immediate was always checked to be in range. Assembly parsing would use the 0-7 form when a mnemonic like vpcomtrueb was used. If the immediate was specified directly the _alt form was used. The disassembler would prefer to use the 0-7 form instruction when the immediate was in range and the _alt form otherwise. This way disassembly would print the most readable form when possible.
The assembly parsing for things like vpcomtrueb relied on splitting the mnemonic into 3 pieces. A "vpcom" prefix, an immediate representing the "true", and a suffix of "b". The tablegenerated printing code would similarly print a "vpcom" prefix, decode the immediate into a string, and then print "b".
The _alt form on the other hand parsed and printed like any other instruction with no specialness.
With this patch we drop to one form and solve the disassembly printing issue by doing custom printing when the immediate is 0-7. The parsing code has been tweaked to turn "vpcomtrueb" into "vpcomb" and then the immediate for the "true" is inserted either before or after the other operands depending on at&t or intel syntax.
I'd rather not do the custom printing, but I tried using an InstAlias for each possible mnemonic for all 8 immediates for all 16 combinations of element size, signedness, and memory/register. The code emitted into printAliasInstr ended up checking the number of operands, the register class of each operand, and the immediate for all 256 aliases. This was repeated for both the at&t and intel printer. Despite a lot of common checks between all of the aliases, when compiled with clang at least this commonality was not well optimized. Nor do all the checks seem necessary. Since I want to do a similar thing for vcmpps/pd/ss/sd which have 32 immediate values and 3 encoding flavors, 3 register sizes, etc. This didn't seem to scale well for clang binary size. So custom printing seemed a better trade off.
I also considered just using the InstAlias for the matching and not the printing. But that seemed like it would add a lot of extra rows to the matcher table. Especially given that the 32 immediates for vpcmpps have 46 strings associated with them.
Differential Revision: https://reviews.llvm.org/D59398
llvm-svn: 356343
Summary:
This is similar to how addr2line handles consecutive entries with the
same address - pick the last one.
Reviewers: dblaikie, friss, JDevlieghere
Reviewed By: dblaikie
Subscribers: eugenis, vitalybuka, echristo, JDevlieghere, probinson, aprantl, hiraditya, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D58952
llvm-svn: 356265
yaml2obj currently derives the p_filesz, p_memsz, and p_offset values of
program headers from their sections. This makes writing tests for
certain formats more complex, and sometimes impossible. This patch
allows setting these fields explicitly, overriding the default value,
when relevant.
Reviewed by: jakehehrlich, Higuoxing
Differential Revision: https://reviews.llvm.org/D59372
llvm-svn: 356247
For ELF, we accept but ignore --only-keep-debug. Do the same for llvm-strip.
COFF does implement this, so update the test that it is supported.
llvm-svn: 356207
Summary:
CoverageExporterJson::renderFiles accounts for most of the execution time given a large profdata file with multiple binaries.
Proposed solution is to generate JSON for each file in parallel and sort at the end to preserve deterministic output. Also added flags to skip generating parts of the output to trim the output size.
Patch by Sajjad Mirza (@sajjadm).
Reviewers: Dor1s, vsk
Reviewed By: Dor1s, vsk
Subscribers: liaoyuke, mgrang, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59277
llvm-svn: 356178
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
This is a reland of r356129, attempting to fix greendragon failures
due to a suspected compatibility issue with od on the greendragon bots
versus other versions.
llvm-svn: 356136
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
llvm-svn: 356129
error() was previously cleaned up from CopyConfig, but new uses were introduced.
This also tweaks the error message for --add-symbol to report all invalid flags.
llvm-svn: 356105
Add break statements in Object/ELF.cpp since the code should consider the
generic tags for Hexagon, MIPS, and PPC. Add a test (copied from llvm-readobj)
to show that this works correctly (earlier versions of this patch would have
asserted).
The warnings in X86ELFObjectWriter.cpp are actually false-positives since
the nested switch() handles all possible values and returns in all cases.
Make this explicit by adding llvm_unreachable's.
Differential Revision: https://reviews.llvm.org/D58837
llvm-svn: 356037
Summary:
This is similar to how addr2line handles consecutive entries with the
same address - pick the last one.
Reviewers: dblaikie, friss, JDevlieghere
Reviewed By: dblaikie
Subscribers: ormris, echristo, JDevlieghere, probinson, aprantl, hiraditya, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D58952
llvm-svn: 355972
Prior to this change, the "Symbol" field of a relocation would always be
assumed to be a symbol name, and if no such symbol existed, the
relocation would reference index 0. This confused me when I tried to use
a literal symbol index in the field: since "0x1" was not a known symbol
name, the symbol index was set as 0. This change falls back to treating
unknown symbol names as integers, and emits an error if the name is not
found and the string is not an integer.
Note that the Symbol field is optional, so if a relocation doesn't
reference a symbol, it shouldn't be specified. The new error required a
number of test updates.
Reviewed by: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D58510
llvm-svn: 355938
I recently discovered a bug in llvm-cxxfilt introduced in r353743 but
was fixed later incidentally due to r355031. Specifically, llvm-cxxfilt
was attempting to call .back() on an empty string any time there was a
new line in the input. This was causing a crash in my debug builds only.
This patch simply adds a test that explicitly tests that llvm-cxxfilt
handles empty lines correctly. It may pass under release builds under
the broken behaviour, but it fails at least in debug builds.
Reviewed by: mattd
Differential Revision: https://reviews.llvm.org/D58785
llvm-svn: 355929
Summary:
llvm-objdump can be tricked into reading beyond valid memory and
segfaulting if LC_LINKER_COMMAND strings are not null terminated. libObject
does have code to validate the integrity of the LC_LINKER_COMMAND struct,
but this validator improperly assumes linker command strings are null
terminated.
The solution is to report an error if a string extends beyond the end of
the LC_LINKER_COMMAND struct.
Reviewers: lhames, pete
Reviewed By: pete
Subscribers: rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59179
llvm-svn: 355851
When --compress-debug-sections is given,
llvm-objcopy removes the uncompressed sections and adds compressed to the section list.
This makes all the pointers to old sections to be outdated.
Currently, code already has logic for replacing the target sections of the relocation
sections. But we also have to update the relocations by themselves.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40885.
Differential revision: https://reviews.llvm.org/D58960
llvm-svn: 355821
Specifically, compute and Print Type and Section columns.
This is a re-commit of rL354833, after fixing the Asan problem found a a buildbot.
Differential Revision: https://reviews.llvm.org/D59060
llvm-svn: 355742
llvm-readelf prints relocation addends as:
<symbol value>[+-]<absolute addend>
where [+-] is determined from whether addend is less than zero or not.
However, it does not print the +/- if there is no symbol, which meant
that negative addends became their positive value with no indication
that this had happened. This patch stops the absolute conversion when
addends are negative and there is no associated symbol.
Reviewed by: Higuoxing, mattd, MaskRay
Differential Revision: https://reviews.llvm.org/D59095
llvm-svn: 355696
Rotate with explicit immediate is a single uop from Haswell on. An immediate of 1 has a dependency on the previous writer of flags, but the other immediate values do not.
The implicit rotate by 1 instruction is 2 uops. But the flags are merged after the rotate uop so the data result does not see the flag dependency. But I don't think we have any way of modeling that.
RORX is 1 uop without the load. 2 uops with the load. We currently model these with WriteShift/WriteShiftLd.
Differential Revision: https://reviews.llvm.org/D59077
llvm-svn: 355636
Haswell and possibly Sandybridge have an optimization for ADC/SBB with immediate 0 to use a single uop flow. This only applies GR16/GR32/GR64 with an 8-bit immediate. It does not apply to GR8. It also does not apply to the implicit AX/EAX/RAX forms.
Differential Revision: https://reviews.llvm.org/D59058
llvm-svn: 355635
Summary:
Since bottleneck hints are enabled via user request, it can be
confusing if no bottleneck information is presented. Such is the
case when no bottlenecks are identified. This patch emits a message
in that case.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: tschuett, gbedwell, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59098
llvm-svn: 355628
Change the format type of *Personality and *LSDAAddress to PRIx64 since
they are of type uint64_t.
The problem was detected on mips builds, where it was printing junk values
and causing test failure.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D58451
llvm-svn: 355607
I need this to remove a binary from LLD test suite.
The patch also simplifies the code a bit.
Differential revision: https://reviews.llvm.org/D59082
llvm-svn: 355591
Part 4 of CSPGO changes:
(1) add support in cmake for cspgo build.
(2) fix an issue in big endian.
(3) test cases.
Differential Revision: https://reviews.llvm.org/D54175
llvm-svn: 355541
Summary:
This tag is documented in https://docs.oracle.com/cd/E19253-01/817-1984/chapter6-42444/index.html
Though I could not find some docs that describe it in detail, I found some code snippets.
1.
```
/*
* Look up the string in the string table and get its offset. If
* this succeeds, then it is possible that there is a DT_NEEDED
* dynamic entry that references it.
*/
have_string = elfedit_sec_findstr(argstate->str.sec,
strpad_elt.dn_dyn.d_un.d_val, arg, &str_offset) != 0;
if (have_string) {
dyn = argstate->dynamic.data;
for (ndx = 0; ndx < numdyn; dyn++, ndx++) {
if (((dyn->d_tag == DT_NEEDED) ||
(dyn->d_tag == DT_USED)) &&
(dyn->d_un.d_val == str_offset))
goto done;
}
}
```
80192cd83b/usr/src/cmd/sgs/elfedit/modules/common/syminfo.c (L512)
2.
```
case DT_USED:
case DT_INIT_ARRAY:
case DT_FINI_ARRAY:
if (do_dynamic)
{
if (entry->d_tag == DT_USED
&& VALID_DYNAMIC_NAME (entry->d_un.d_val))
{
char *name = GET_DYNAMIC_NAME (entry->d_un.d_val);
if (*name)
{
printf (_("Not needed object: [%s]\n"), name);
break;
}
}
print_vma (entry->d_un.d_val, PREFIX_HEX);
putchar ('\n');
}
break;
```
http://web.mit.edu/freebsd/head/contrib/binutils/binutils/readelf.c
3.
```
#define DT_USED 0x7ffffffe /* ignored - same as needed */
```
https://github.com/switchbrew/switch-tools/blob/master/src/elf_common.h
Reviewers: jhenderson, grimar
Reviewed By: jhenderson, grimar
Subscribers: emaste, krytarowski, fedor.sergeev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58762
llvm-svn: 355468
When dumping ToT clan's debug info with dwarfdump, we were seeing an
error saying that that the location list overflows the debug_loc
section. After reducing the testcase we figured out that we were
interpreting the DW_FORM_data4 as a section offset.
In DWARF3 DW_FORM_data4 and DW_FORM_data8 served also as a section
offset. Until now we didn't check check for the DWARF version, because
some producers (read old versions of clang) were still emitting this.
The relevant code/comment was added in 2013, and I believe it's now
reasonable to start checking the version.
The FormValue class is a little bit of a mess because it cashes the
DWARF unit and context when it extracted the value itself. Several
methods of the class rely on it being present, or return an Optional for
the code path that needs it. At the same time the FormValue class also
used in places where there's no DWARF unit.
For this patch I went with the least invasive change: checking the
version from the CU when it's available. If it's not (because the form
value was created from a value directly) we default to the old behavior.
Differential revision: https://reviews.llvm.org/D58698
llvm-svn: 355456
When --compress-debug-sections is given, llvm-objcopy do not compress
sections that have "ZLIB" header in data. Normally this signature is used
in zlib-gnu compression format. But if zlib-gnu used then the name of the compressed
section should start from .z* (e.g .zdebug_info). If it does not, then it is not
a zlib-gnu format and section should be treated as a normal uncompressed section.
Differential revision: https://reviews.llvm.org/D58908
llvm-svn: 355399
This patch adds a new flag named -bottleneck-analysis to print out information
about throughput bottlenecks.
MCA knows how to identify and classify dynamic dispatch stalls. However, it
doesn't know how to analyze and highlight kernel bottlenecks. The goal of this
patch is to teach MCA how to correlate increases in backend pressure to backend
stalls (and therefore, the loss of throughput).
From a Scheduler point of view, backend pressure is a function of the scheduler
buffer usage (i.e. how the number of uOps in the scheduler buffers changes over
time). Backend pressure increases (or decreases) when there is a mismatch
between the number of opcodes dispatched, and the number of opcodes issued in
the same cycle. Since buffer resources are limited, continuous increases in
backend pressure would eventually leads to dispatch stalls. So, there is a
strong correlation between dispatch stalls, and how backpressure changed over
time.
This patch teaches how to identify situations where backend pressure increases
due to:
- unavailable pipeline resources.
- data dependencies.
Data dependencies may delay execution of instructions and therefore increase the
time that uOps have to spend in the scheduler buffers. That often translates to
an increase in backend pressure which may eventually lead to a bottleneck.
Contention on pipeline resources may also delay execution of instructions, and
lead to a temporary increase in backend pressure.
Internally, the Scheduler classifies instructions based on whether register /
memory operands are available or not.
An instruction is marked as "ready to execute" only if data dependencies are
fully resolved.
Every cycle, the Scheduler attempts to execute all instructions that are ready
to execute. If an instruction cannot execute because of unavailable pipeline
resources, then the Scheduler internally updates a BusyResourceUnits mask with
the ID of each unavailable resource.
ExecuteStage is responsible for tracking changes in backend pressure. If backend
pressure increases during a cycle because of contention on pipeline resources,
then ExecuteStage sends a "backend pressure" event to the listeners.
That event would contain information about instructions delayed by resource
pressure, as well as the BusyResourceUnits mask.
Note that ExecuteStage also knows how to identify situations where backpressure
increased because of delays introduced by data dependencies.
The SummaryView observes "backend pressure" events and prints out a "bottleneck
report".
Example of bottleneck report:
```
Cycles with backend pressure increase [ 99.89% ]
Throughput Bottlenecks:
Resource Pressure [ 0.00% ]
Data Dependencies: [ 99.89% ]
- Register Dependencies [ 0.00% ]
- Memory Dependencies [ 99.89% ]
```
A bottleneck report is printed out only if increases in backend pressure
eventually caused backend stalls.
About the time complexity:
Time complexity is linear in the number of instructions in the
Scheduler::PendingSet.
The average slowdown tends to be in the range of ~5-6%.
For memory intensive kernels, the slowdown can be significant if flag
-noalias=false is specified. In the worst case scenario I have observed a
slowdown of ~30% when flag -noalias=false was specified.
We can definitely recover part of that slowdown if we optimize class LSUnit (by
doing extra bookkeeping to speedup queries). For now, this new analysis is
disabled by default, and it can be enabled via flag -bottleneck-analysis. Users
of MCA as a library can enable the generation of pressure events through the
constructor of ExecuteStage.
This patch partially addresses https://bugs.llvm.org/show_bug.cgi?id=37494
Differential Revision: https://reviews.llvm.org/D58728
llvm-svn: 355308
Add statistics for abstract origins, function, variable and parameter
locations; break the 'variable' counts down into variables and
parameters. Also update call site counting to check for
DW_AT_call_{file,line} in addition to DW_TAG_call_site.
Differential revision: https://reviews.llvm.org/D58849
llvm-svn: 355243
Summary:
This patch will obtain the section name for symbols that refer to a section. Prior to this patch the Name field for STT_SECTIONs was blank, now it is populated.
Before:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
With this patch:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1 .text
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3 .data
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4 .bss
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
This fixes PR40788
Reviewers: jhenderson, rupprecht, espindola
Reviewed By: rupprecht
Subscribers: emaste, javed.absar, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58796
llvm-svn: 355207
This is for tweaking SHT_SYMTAB sections.
Their sh_info contains the (number of symbols + 1) usually.
But for creating invalid inputs for test cases it would be convenient
to allow explicitly override this field from YAML.
Differential revision: https://reviews.llvm.org/D58779
llvm-svn: 355193
There's no reason to limit the DWARF CFI dumper to EM_386 and EM_X86_64;
ELF files could contain DWARF CFI on almost any platform (even 32-bit ARM;
NetBSD uses DWARF CFI on that platform). So start using the DWARF CFI dumper
unconditionally so that we can dump .eh_frame sections on the remaining ELF
platforms as well as in NetBSD binaries.
Differential Revision: https://reviews.llvm.org/D58761
llvm-svn: 355151
Add support for cloning DWARF expressions that contain base type DIE
references in dsymutil.
<rdar://problem/48167812>
Differential Revision: https://reviews.llvm.org/D58534
llvm-svn: 355148
Summary:
In the clang UI, replaces -mthread-model posix with -matomics as the
source of truth on threading. In the backend, replaces
-thread-model=posix with the atomics target feature, which is now
collected on the WebAssemblyTargetMachine along with all other used
features. These collected features will also be used to emit the
target features section in the future.
The default configuration for the backend is thread-model=posix and no
atomics, which was previously an invalid configuration. This change
makes the default valid because the thread model is ignored.
A side effect of this change is that objects are never emitted with
passive segments. It will instead be up to the linker to decide
whether sections should be active or passive based on whether atomics
are used in the final link.
Reviewers: aheejin, sbc100, dschuff
Subscribers: mehdi_amini, jgravelle-google, hiraditya, sunfish, steven_wu, dexonsmith, rupprecht, jfb, jdoerfert, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D58742
llvm-svn: 355112
This is https://bugs.llvm.org/show_bug.cgi?id=40861,
Previously llvm-readobj would print the DT_NULL sometimes
for the dynamic section that has no terminator entry.
The logic of printDynamicTable was a bit overcomplicated.
I rewrote it slightly to fix the issue and commented.
Differential revision: https://reviews.llvm.org/D58716
llvm-svn: 355073
This restores the patch that splits demangled stdin input on
non-alphanumerics. I had reverted this patch earlier because it broke
Windows build-bots. I have updated the test so that it passes on
Windows.
I was running the test from powershell and never saw the issue until I
switched to the mingw shell.
This reverts commit 628ab5c682.
llvm-svn: 355031
This reverts commit 5cd5f8f256.
The test passes on linux, but fails on the windows build-bots.
This test failure seems to be a quoting issue between my test and
FileCheck on Windows. I'm reverting this patch until I can replicate
and fix in my Windows environment.
llvm-svn: 355021
Summary:
This patch displays a hexadecimal section value (Elf_Shdr::sh_type) or section-relative offset when printing unknown sections.
Here is a subset of the output (ignoring the fields following "Type" when dumping an ELF's GNU `--section-headers` table).
Section Headers:
```
[Nr] Name Type
[16] android_rel LOOS+0x1
[17] android_rela LOOS+0x2
[27] unknown 0x1000: <unknown>
[28] loos LOOS+0
[30] hios VERSYM
[31] loproc LOPROC+0
[33] hiproc LOPROC+0xFFFFFFF
[34] louser LOUSER+0
[36] hiuser LOUSER+0x7FFFFFFF
```
As a comparison, the previous output looked something like the above, but with a blank "Type" field:
```
[Nr] Name Type
[27] unknown
[28] loos
[30] hios VERSYM
[31] loproc
[33] hiproc
[34] louser
[36] hiuser
```
This fixes PR40773
Reviewers: jhenderson, rupprecht, Bigcheese
Reviewed By: jhenderson, rupprecht, Bigcheese
Subscribers: MaskRay, Bigcheese, srhines, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58701
llvm-svn: 355014
The original intent was to enable this test for Windows; however, that
initial patch broke one of the build-bots. I temporarily disabled this
test on Windows until that issue was resolved. It was resolved in my
previous patch (cfd1d9742ee2d1b8dd6b7), and now I am re-enabling this
test.
llvm-svn: 355011
Ideally this is a NFCI, used single quotes in most cases. Hopefully
this will make the Windows bot happy.
I've marked this unsupported on windows, until I get my windows box
setup with this patch to test. I'll remove that constraint after I'm
confident this will pass on windows. I just want to silence the
buildbots for now.
llvm-svn: 355007
This patch adds testing of areas of the code that are not fully tested,
in particular dynamic table printing, ELF type printing, handling of
edge cases where things are missing/empty (relocations/program header
tables/section header table), and the --string-dump switch.
Reviewed by: grimar, higuoxing, rupprecht
Differential Revision: https://reviews.llvm.org/D58677
llvm-svn: 355003
Summary:
Before:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH 0x00000000001c2e61
```
After:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH $ORIGIN/../lib
```
Only a small problem here, I have no idea on choosing test case. I see there's a test
file(test/tools/llvm-objdump/private-headers-dynamic-section.test). But it has no DT_RPATH and DT_RUNPATH tags. Shall I replace the ELF file in the
Inputs dir by a new one?
Reviewers: jhenderson, grimar
Reviewed By: jhenderson
Subscribers: srhines, rupprecht, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58707
llvm-svn: 355001
Summary:
This patch attempts to replicate GNU c++-filt behavior when splitting stdin input for demangling.
Previously, cxx-filt would split input only on spaces. Each delimited item is then demangled.
From what I have tested, GNU c++filt also splits input on any character that does not make
up the mangled name (notably commas, but also a large set of non-alphanumeric characters).
This patch splits stdin input on any character that does not belong to the Itanium mangling
format (since Itanium is currently the only supported format in llvm-cxxfilt).
This is an update to PR39990
Reviewers: jhenderson, tejohnson, compnerd
Reviewed By: compnerd
Subscribers: erik.pilkington, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58416
llvm-svn: 354998
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
llvm-readobj's error messages were broken for bad archive members. This
patch fixes them, and also adds testing for archive and thin archive
handling within llvm-readobj.
Reviewed by: rupprecht, grimar, higuoxing
Differential Revision: https://reviews.llvm.org/D58681
llvm-svn: 354960
Dispatch stall cycles may be associated to multiple dispatch stall events.
Before this patch, each stall cycle was associated with a single stall event.
This patch also improves a couple of code comments, and adds a helper method to
query the Scheduler for dispatch stalls.
llvm-svn: 354877
This allows tools to parse/dump the architecture specific tags
like DT_MIPS_*, DT_PPC64_* and DT_HEXAGON_*
Also fixes a bug in DynamicTags.def which was revealed in this patch.
Differential revision: https://reviews.llvm.org/D58667
llvm-svn: 354876
The --disassembler-options, or -M, are used to customize
the disassembler and affect its output.
The two implemented options allow selecting register names on ARM:
* With -Mreg-names-raw, the disassembler uses rNN for all registers.
* With -Mreg-names-std it prints sp, lr and pc for r13, r14 and r15,
which is the default behavior of llvm-objdump.
Differential Revision: https://reviews.llvm.org/D57680
llvm-svn: 354870
Recently, support was added to yaml2obj to allow dynamic sections to
have a list of entries, to make it easier to write tests with dynamic
sections. However, this change also removed the ability to provide
custom contents to the dynamic section, making it hard to test
malformed contents (e.g. because the section is not a valid size to
contain an array of entries). This change reinstates this. An error is
emitted if raw content and dynamic entries are both specified.
Reviewed by: grimar, ruiu
Differential Review: https://reviews.llvm.org/D58543
llvm-svn: 354770
Summary:
The AX/EAX/RAX with immediate forms are 2 uops just like the AL with immediate.
The modrm form with r8 and immediate is a single uop just like r16/r32/r64 with immediate.
Reviewers: RKSimon, andreadb
Reviewed By: RKSimon
Subscribers: gbedwell, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58581
llvm-svn: 354754
Summary:
The objdump Mach-O parser uses MachOObjectFile::checkSymbolTable() to
verify the symbol table is in a legal state before dereferencing the
offsets in the table. This routine missed a test for N_STAB symbols
when validating the two-level name space library ordinal for undefined
symbols. If the binary in question contained a value in the n_desc high
byte that is larger than the list of loaded dylibs, checkSymbolTable()
will flag the library ordinal as being out of range. Most of the time
the n_desc field is set to 0 or to small values, but old final linked
binaries exist with N_STAB symbols bearing non-trivial n_desc fields.
The change here is simply to verify a symbol is not an N_STAB symbol
before consulting the values of n_other or n_desc.
rdar://44977336
Reviewers: lhames, pete, ab
Reviewed By: pete
Subscribers: llvm-commits, rupprecht
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58568
llvm-svn: 354722
This fixes https://bugs.llvm.org/show_bug.cgi?id=40786
("obj2yaml symbol output missing section index for SHN_ABS and SHN_COMMON symbols")
Since SHN_ABS and SHN_COMMON symbols are special, we should preserve
the st_shndx for them. The patch does this for them and the other special symbols.
The test case is based on the test provided by James Henderson at the bug page!
Differential revision: https://reviews.llvm.org/D58498
llvm-svn: 354661
Summary:
This removes calls to `error()`/`reportError()` in the main driver (llvm-objcopy.cpp) as well as the associated argv-parsing (CopyConfig.cpp). `logAllUnhandledErrors()` is now the main way to print errors.
There are still a few uses from within the per-arch drivers, so we can't delete them yet... but almost!
Reviewers: jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, jakehehrlich, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58316
llvm-svn: 354600
The existing ELF symbol and section table testing doesn't test many of
the corner-cases or valid values for various ELF properties, including
things like binding, visibility, section type and so on. This patch adds
a series of tests that test these and other related edge-cases.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D58457
llvm-svn: 354577
There was no real testing for llvm-readobj/llvm-readelf's behaviour
under various bad inputs and command-line switches. This patch adds some
testing of this, along with basic testing of --version and --help.
Reviewed by: MaskRay, grimar
Differential Revision: https://reviews.llvm.org/D58455
llvm-svn: 354567
In order to test tool handling of invalid section indexes, I need to
create an object containing such an invalid section index. I could
create a hex-edited binary, but having the ability to use yaml2obj is
preferable. Prior to this change, yaml2obj would reject any explicit
section indexes less than SHN_LORESERVE. This patch changes it to allow
any value.
I had to change the test to use llvm-readelf instead of llvm-readobj,
because llvm-readobj does not like invalid section indexes. I've also
expanded the test to show that the most common SHN_* values are accepted
(SHN_UNDEF, SHN_ABS, SHN_COMMON).
Reviewed by: grimar, jakehehrlich
Differential Revision: https://reviews.llvm.org/D58445
llvm-svn: 354566
Adds llvm-dwarfdump support for pretty printing Dwarf5 expressions ops
that reference a base type (right now only DW_OP_convert is added).
Includes verification to verify that the ops operand is actually a
DW_TAG_base_type DIE.
Differential Revision: https://reviews.llvm.org/D58442
llvm-svn: 354552
This patch adds two new tests for edge-case behaviour for --section-
mapping, namely when there are no program headers, and when there are no
section headers.
Reviewed by: mattd
Differential Revision: https://reviews.llvm.org/D58456
llvm-svn: 354484
A number of the obj2yaml tests end in .yaml, but .yaml is not a default
file type picked up by lit, so these tests weren't being run when
running the testsuite as a whole (they could be run explicitly still).
This change adds a lit local config file to specify the known file types
for obj2yaml tests (.yaml and .test). Additionally, it fixes the
yaml2obj config file to allow both .test and .yaml suffixed tests
(previously, the two tests ending in '.test' were not being run).
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D58439
llvm-svn: 354474
Summary:
Rename MemoryIndex to InitFlags and implement logic for determining
data segment layout in ObjectYAML and MC. Also adds a "passive" flag
for the .section assembler directive although this cannot be assembled
yet because the assembler does not support data sections.
Reviewers: sbc100, aardappel, aheejin, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57938
llvm-svn: 354397
The patch adds support for --hash-filenames to llvm-cov. This option adds md5
hash of the source path to the name of the generated .gcov file. The option is
crucial for cases where you have multiple files with the same name but can't
use --preserve-paths as resulting filenames exceed the limit.
from gcov(1):
```
-x
--hash-filenames
By default, gcov uses the full pathname of the source files to to
create an output filename. This can lead to long filenames that
can overflow filesystem limits. This option creates names of the
form source-file##md5.gcov, where the source-file component is
the final filename part and the md5 component is calculated from
the full mangled name that would have been used otherwise.
```
Patch by Igor Ignatev!
Differential Revision: https://reviews.llvm.org/D58370
llvm-svn: 354379
- Tests that use multiple short switches now test them grouped and ungrouped.
- Ensure the output of ungrouped and grouped variants is identical
Differential Revision: https://reviews.llvm.org/D57904
llvm-svn: 354375
yaml2obj/obj2yaml previously supported SHT_LOOS, SHT_HIOS, and
SHT_LOPROC for section types. These are simply values that delineate a
range and don't really make sense as valid values. For example if a
section has type value 0x70000000, obj2yaml shouldn't print this value
as SHT_LOPROC. Additionally, this was missing the three other range
markers (SHT_HIPROC, SHT_LOUSER and SHT_HIUSER).
This change removes these three range markers. It also adds support for
specifying the type as an integer, to allow section types that LLVM
doesn't know about.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D58383
llvm-svn: 354344
Fix:
Replace
assert(!IO.getContext() && "The IO context is initialized already");
with
assert(IO.getContext() && "The IO context is not initialized");
(this was introduced in r354329, where I tried to quickfix the darwin BB
and seems copypasted the assert from the wrong place).
Original commit message:
The section is described here:
https://refspecs.linuxfoundation.org/LSB_1.3.0/gLSB/gLSB/symverrqmts.html
Patch just teaches obj2yaml/yaml2obj to dump and parse such sections.
We did the finalization of string tables very late,
and I had to move the logic to make it a bit earlier.
That was needed in this patch since .gnu.version_r adds strings to .dynstr.
This might also be useful for implementing other special sections.
Everything else changed in this patch seems to be straightforward.
Differential revision: https://reviews.llvm.org/D58119
llvm-svn: 354335
The section is described here:
https://refspecs.linuxfoundation.org/LSB_1.3.0/gLSB/gLSB/symverrqmts.html
Patch just teaches obj2yaml/yaml2obj to dump and parse such sections.
We did the finalization of string tables very late,
and I had to move the logic to make it a bit earlier.
That was needed in this patch since .gnu.version_r adds strings to .dynstr.
This might also be useful for implementing other special sections.
Everything else changed in this patch seems to be straightforward.
Differential revision: https://reviews.llvm.org/D58119
llvm-svn: 354328
Fix: move the test to x86 folder.
Seems it is needed, because llvm-objdump invocation used in test has -D (disasm) flag.
BB: http://lab.llvm.org:8011/builders/clang-hexagon-elf/builds/23016
/local/buildbot/slaves/hexagon-build-02/clang-hexagon-elf/stage1/bin/llvm-objdump:
error: '/local/buildbot/slaves/hexagon-build-02/clang-hexagon-elf/stage1/test/tools/llvm-objdump/Output/disasm-zeroes-relocations.test.tmp':
can't find target: : error: unable to get target for 'x86_64--', see --version and --triple.
.
llvm-svn: 354322
This is for -D -reloc combination.
With this patch, we do not skip the zero bytes that have a relocation against
them when -reloc is used. If -reloc is not used, then the behavior will be the same.
Differential revision: https://reviews.llvm.org/D58174
llvm-svn: 354319
This patch fixes a bug where register writes performed by optimizable register
moves were sometimes wrongly treated like partial register updates. Before this
patch, llvm-mca wrongly predicted a 1.50 IPC for test reg-move-elimination-6.s
(added by this patch). With this patch, llvm-mca correctly updates the register
defintions in the PRF, and the IPC for that test is now correctly reported as 2.
llvm-svn: 354271
Summary:
This change fixes the `-no-llvm-bc` flag to work with object files within
archives. Currently the `-no-llvm-bc` flag works for regular object files, but
not static libraries, where it continues to show bitcode symbol info.
Original support was added in D4371.
Reviewers: compnerd, smeenai, pcc
Reviewed By: compnerd
Subscribers: rupprecht, keith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D48798
llvm-svn: 354196
Summary:
llvm-symbolizer would originally report symbols that belonged to an invalid object file section.
Specifically the case where: `*Symbol.getSection() == ObjFile.section_end()`
This patch prevents the Symbolizer from collecting symbols that belong to invalid sections.
The test (from PR40591) introduces a case where two symbols have address 0,
one symbol is defined, 'foo', and the other is not defined, 'bar'. This patch will cause
the Symbolizer to keep 'foo' and ignore 'bar'.
As a side note, the logic for adding symbols to the Symbolizer's store
(`SymbolizableObjectFile::addSymbol`) replaces symbols with the
same <address, size> pair. At some point that logic should be revisited as in the
aforementioned case, 'bar' was overwriting 'foo' in the Symbolizer's store,
and 'foo' was forgotten.
This fixes PR40591
Reviewers: jhenderson, rupprecht
Reviewed By: rupprecht
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58146
llvm-svn: 354083
Summary:
GNU ar has a `P` modifier that changes filename comparisons to use full paths instead of the basename. As noted in the GNU docs, regular archives are not created with full path names, so P is used to deal with archives created by other archive programs (e.g. see the updated `absolute-paths.test` test case).
Since thin archives use full path names -- paths are relative to the archive -- it seems very error prone to not imply P when dealing with thin archives, so P is implied in those cases. (I think this is a deviation from GNU ar that makes sense).
This fixes PR37436 via https://github.com/ClangBuiltLinux/linux/issues/33.
Reviewers: mstorsjo, pcc, ruiu, davide, david2050, rnk
Subscribers: tpimh, llvm-commits, nickdesaulniers
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57927
llvm-svn: 354044
Summary:
When adding one thin archive to another, we currently chop off the relative path to the flattened members. For instance, when adding `foo/child.a` (which contains `x.txt`) to `parent.a`, when flattening it we should add it as `foo/x.txt` (which exists) instead of `x.txt` (which does not exist).
As a note, this also undoes the `IsNew` parameter of handling relative paths in r288280. The unit test there still passes.
This was reported as part of testing the kernel build with llvm-ar: https://patchwork.kernel.org/patch/10767545/ (see the second point).
Reviewers: mstorsjo, pcc, ruiu, davide, david2050, inglorion
Reviewed By: ruiu
Subscribers: void, jdoerfert, tpimh, mgorny, hans, nickdesaulniers, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57842
llvm-svn: 353995
The DWARF standard says that an empty compile unit is not valid:
> Each such contribution consists of a compilation unit header (see
> Section 7.5.1.1 on page 200) followed by a single DW_TAG_compile_unit or
> DW_TAG_partial_unit debugging information entry, together with its
> children.
Therefore we shouldn't clone them in dsymutil.
Differential revision: https://reviews.llvm.org/D57979
llvm-svn: 353903
Summary:
An empty dwo_id indicates a degenerate .dwo file that should not have been generated in the first place. Instead of discovering this error later when merging with another degenerate .dwo file, print an error immediately when noticing an unset dwo_id, including the filename of the offending file.
Test case created by compiling a trivial file w/ `-fno-split-dwarf-inlining -gmlt -gsplit-dwarf -c` prior to r353771
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: jdoerfert, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58085
llvm-svn: 353846
ELFYAML.h contains a `Section` class which is a base for a few other
sections classes that are used for mapping different section types.
`Section` has a `StringRef Info` field used for storing sh_info.
At the same time, sh_info has very different meanings for sections and
cannot be processed in a similar way generally,
for example ELFDumper does not handle it in `dumpCommonSection`
but do that in `dumpGroup` and `dumpCommonRelocationSection` respectively.
At this moment, we have and handle it as a string, because that was possible for
the current use case. But also it can simply be a number:
For SHT_GNU_verdef is "The number of version definitions within the section."
The patch moves `Info` field out to be able to have it as a number.
With that change, each class will be able to decide what type and purpose
of the sh_info field it wants to use.
I also had to edit 2 test cases. This is because patch fixes a bug. Previously we
accepted yaml files with Info fields for all sections (for example, for SHT_DYNSYM too).
But we do not handle it and the resulting objects had zero sh_info fields set for
such sections. Now it is accepted only for sections that supports it.
Differential revision: https://reviews.llvm.org/D58054
llvm-svn: 353810
Summary:
Originally, llvm-cxxfilt would treat a line as a single mangled item to be demangled.
If a mangled name appears in the middle of that string, that name would not be demangled.
GNU c++filt splits and demangles every word in a string that is piped to it via stdin.
Prior to this patch llvm-cxxfilt would never split strings piped to it.
This patch replicates the GNU behavior and splits strings that are piped to it via stdin.
This fixes PR39990
Reviewers: compnerd, jhenderson, davide
Reviewed By: compnerd, jhenderson
Subscribers: erik.pilkington, jhenderson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57350
llvm-svn: 353743
This was introduced by me in r353613.
I tried to fix Big-endian bot and replaced
uintX_t -> ELFT::Xword. But ELFT::Xword is a packed<uint64_t>,
so it is always 8 bytes and that was obviously incorrect.
My intention was to use something like packed<uint> actually, which
size is target dependent.
Patch fixes this bug and adds a test case, since no bots seems reported this.
llvm-svn: 353636
This teaches the tools to parse and dump
the .dynamic section and its dynamic tags.
Differential revision: https://reviews.llvm.org/D57691
llvm-svn: 353606
This broke the Chromium build on Windows, see https://crbug.com/930058
> Summary:
> When adding one thin archive to another, we currently chop off the relative path to the flattened members. For instance, when adding `foo/child.a` (which contains `x.txt`) to `parent.a`, whe
> lattening it we should add it as `foo/x.txt` (which exists) instead of `x.txt` (which does not exist).
>
> As a note, this also undoes the `IsNew` parameter of handling relative paths in r288280. The unit test there still passes.
>
> This was reported as part of testing the kernel build with llvm-ar: https://patchwork.kernel.org/patch/10767545/ (see the second point).
>
> Reviewers: mstorsjo, pcc, ruiu, davide, david2050
>
> Subscribers: hiraditya, llvm-commits
>
> Tags: #llvm
>
> Differential Revision: https://reviews.llvm.org/D57842
This reverts commit bf990ab5aa.
llvm-svn: 353507
DW_TAG_subprogram DIEs should not be counted in the inlined function statistic. This also addresses the source variables count, as that uses the inlined function count in its calculations.
Differential revision: https://reviews.llvm.org/D57849
llvm-svn: 353491
Summary:
When adding one thin archive to another, we currently chop off the relative path to the flattened members. For instance, when adding `foo/child.a` (which contains `x.txt`) to `parent.a`, when flattening it we should add it as `foo/x.txt` (which exists) instead of `x.txt` (which does not exist).
As a note, this also undoes the `IsNew` parameter of handling relative paths in r288280. The unit test there still passes.
This was reported as part of testing the kernel build with llvm-ar: https://patchwork.kernel.org/patch/10767545/ (see the second point).
Reviewers: mstorsjo, pcc, ruiu, davide, david2050
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57842
llvm-svn: 353424
When type streams with forward references were merged using GHashes, cycles
were introduced in the debug info. This was caused by
GlobalTypeTableBuilder::insertRecordAs() not inserting the record on the second
pass, thus yielding an empty ArrayRef at that record slot. Later on, upon PDB
emission, TpiStreamBuilder::commit() would skip that empty record, thus
offseting all indices that came after in the stream.
This solution comes in two steps:
1. Fix the hash calculation, by doing a multiple-step resolution, iff there are
forward references in the input stream.
2. Fix merge by resolving with multiple passes, therefore moving records with
forward references at the end of the stream.
This patch also adds support for llvm-readoj --codeview-ghash.
Finally, fix dumpCodeViewMergedTypes() which previously could reference deleted
memory.
Fixes PR40221
Differential Revision: https://reviews.llvm.org/D57790
llvm-svn: 353412
This allows limiting the displayed remarks to the ones with names
matching the filter (regular) expression.
Generating html pages for a larger project with optimization remarks can
result in a huge HTML documents and using --filter allows to focus on a
set of interesting remarks.
Reviewers: hfinkel, anemet, thegameg, serge-sans-paille
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D57827
llvm-svn: 353322
yaml2obj previously only recognised standard STT_* names, and didn't
allow arbitrary numbers. This change allows the user to specify a number
for the type instead. It also adds a test to verify the existing
behaviour for obj2yaml for unkown symbol types.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D57822
llvm-svn: 353315
The wrong variable was being used when printing the address increment in
verbose output of .debug_line. This patch fixes this.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D57693
llvm-svn: 353288
This patch adds half a dozen new tests that test various edge cases in
the behaviour of the symbolizer and DWARF data parsing. All of them test
the current behaviour.
Reviewed by: JDevlieghere, aprantl
Differential Revision: https://reviews.llvm.org/D57741
llvm-svn: 353286
Summary:
The following patch adds the "None" line to the section to segment mapping dump.
That line lists the sections that do not belong to any segment.
I realize that this change differs from GNU readelf which does not display the latter information.
I'd rather not add this "feature" under a command line option. I think that might introduce confusion, since users would have to
make an additional decision as to if they want to see all of the section-to-segment map or just a subset of it.
Another option is to only print the "None" line if the `--section-mapping` option is passed; however,
that might also introduce some confusion, because the section-to-segment map would be different between`--program-headers`
and the `--section-mapping` output. While the difference is just the "None" line, it seems that if we choose to display
the segment-to-section mapping, then we should always display the whole map including the sections
that do not belong to segments.
```
Section to Segment mapping:
Segment Sections...
00
01 .interp
02 .interp .note.ABI-tag .gnu.hash
03 .init_array .fini_array .dynamic
04 .dynamic
05 .note.ABI-tag
06 .eh_frame_hdr
07
08 .init_array .fini_array .dynamic .got
None .comment .symtab .strtab .shstrtab <--- THIS LINE
```
Reviewers: grimar, rupprecht, jhenderson, espindola
Reviewed By: rupprecht
Subscribers: khemant, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57700
llvm-svn: 353217
See https://github.com/WebAssembly/tool-conventions/pull/95.
This is less typing and IMHO more readable, and it also fits with
our naming around the binary format which tends to use the short name.
e.g.
include/llvm/BinaryFormat/Wasm.h
tools/llvm-objdump/WasmDump.cpp
etc..
Differential Revision: https://reviews.llvm.org/D57611
llvm-svn: 353062
All of these instructions consume one encoded register and the other register is %st. They either write the result to %st or the encoded register. Previously we printed both arguments when the encoded register was written. And we printed one argument when the result was written to %st. For the stack popping forms the encoded register is always the destination and we didn't print both operands. This was inconsistent with gcc and objdump and just makes the output assembly code harder to read.
This patch changes things to always print both operands making us consistent with gcc and objdump. The parser should still be able to handle the single register forms just as it did before. This also matches the GNU assembler behavior.
llvm-svn: 353061
Summary:
Up until the point i have looked in the source, i didn't even understood that
i can disable 'cluster' output. I have always silenced it via ` &> /dev/null`.
(And hoped it wasn't contributing much of the run time.)
While i expect that it has it's use-cases i never once needed it so far.
If i forget to silence it, console is completely flooded with that output.
How about not expecting users to opt-out of analyses,
but to explicitly specify the analyses that should be performed?
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: tschuett, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57648
llvm-svn: 353021
Looking into gcc and objdump behavior more this was overly aggressive. If the register is encoded in the instruction we should print %st(0), if its implicit we should print %st.
I'll be making a more directed change in a future patch.
llvm-svn: 353013
In llvm-nm, the symbol size was being computed only with --print-size option,
even though it was being printed in other cases, such as with --format=posix.
This patch simply removes the guard, so that the size is computed
independently of the later decision to print it or not.
Fixes PR39997.
Differential Revision: https://reviews.llvm.org/D57599
llvm-svn: 353011
Summary:
When calculating clobbers for MS style inline assembly we fail if the asm clobbers stack top because we print st(0) and try to pass it through the gcc register name check. This was found with when I attempted to make a emms/femms clobber all ST registers. If you use emms/femms in MS inline asm we would try to use st(0) as the clobber name but clang would think that wasn't a valid clobber name.
This also matches what objdump disassembly prints. It's also what is printed by gcc -S.
Reviewers: RKSimon, rnk, efriedma, spatel, andreadb, lebedev.ri
Reviewed By: rnk
Subscribers: eraman, gbedwell, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D57621
llvm-svn: 352985
Some triples in llvm-mc appear to be unavailable on some buildbots.
To please those buildbots we temporarily limit the test to darwin
(where the required triple is guranteed to be available)
until we find the right solution.
llvm-svn: 352950
This diff implements first bits for copying (without modification) MachO object files.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D54674
llvm-svn: 352944
Summary:
The following patch introduces a new function `printSectionMapping` which is responsible for dumping just the section-to-segment mapping.
This patch also introduces a n option `-section-mapping` that outputs that mapping without the program headers.
Previously, this functionality was controlled by `printProgramHeaders`, and the output from `-program-headers` has not been changed. I am happy to change the option name, I copied the name that was displayed when outputting the mapping table.
Reviewers: khemant, jhenderson, grimar, rupprecht
Reviewed By: jhenderson, grimar, rupprecht
Subscribers: rupprecht, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57365
llvm-svn: 352896
Summary:
I'm unable to find this number in the "AMD SOG for family 15h".
llvm-exegesis measures the latencies of these instructions as `2`,
which matches the latencies specified in "AMD SOG for family 15h".
However if we look at Agner, Microarchitecture, "AMD Bulldozer, Piledriver,
Steamroller and Excavator pipeline", "Data delay between different execution
domains", the int->ivec transfer is listed as `8`..`10`cy of additional latency.
Also, Agner's "Instruction tables", for Piledriver, lists their latencies as `12`,
which is consistent with `2cy` from exegesis / AMD SOG + `10cy` transfer delay.
Additional data point comes from the fact that Agner's "Instruction tables",
for Jaguar, lists their latencies as `8`; and "AMD SOG for family 16h" does
state the `+6cy` int->ivec delay, which is consistent with instr latency of `1` or `2`.
Reviewers: andreadb, RKSimon, craig.topper
Reviewed By: andreadb
Subscribers: gbedwell, courbet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57300
llvm-svn: 352861
Summary:
Include the symbol being defined in the list of requirements for using --localize-symbol.
This is used, for example, when someone is depending on two different projects that have the same (or close enough) method defined in each library, and using "-L sym" for a conflicting symbol in one of the libraries so that the definition from the other one is used. However, the library may have internal references to the symbol, which cause program crashes when those are used, i.e.:
```
$ cat foo.c
int foo() { return 5; }
$ cat bar.c
int foo();
int bar() { return 2 * foo(); }
$ cat foo2.c
int foo() { /* Safer implementation */ return 42; }
$ cat main.c
int bar();
int main() {
__builtin_printf("bar = %d\n", bar());
return 0;
}
$ ar rcs libfoo.a foo.o bar.o
$ ar rcs libfoo2.a foo2.o
# Picks the wrong foo() impl
$ clang main.o -lfoo -lfoo2 -L. -o main
# Picks the right foo() impl
$ objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
# Links somehow, but crashes at runtime
$ llvm-objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
```
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57417
llvm-svn: 352767
This is the fourth (and final for now) of a series of patches
simplifying llvm-symbolizer tests. See r352752, r352753 and 352754 for
the previous ones. This patch splits out several more distinct test
cases from llvm-symbolizer.test into separate tests, and simplifies them
in various ways including:
1) Building a test case for spaces in path from source, rather than
using a pre-canned binary. This allows deleting of said binary and the
source it was built from.
2) Switching to specifying addresses and objects directly on the
command-line rather than via stdin.
This also adds an explict test for the ability to specify a file and
address as a line in stdin, since the majority of the tests have been
migrated away from this approach, leaving this largely untested.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57446
llvm-svn: 352756
This is the third of a series of patches simplifying llvm-symbolizer
tests. See r352752 and r352753 for the previous two. This patch splits
out a number of distinct test cases from llvm-symbolizer.test into
separate tests, and simplifies them in various ways including:
1) using --obj/positional arguments for the input file and addresses
instead of stdin,
2) using runtime-generated inputs rather than a pre-canned binary, and
3) testing more specifically (i.e. checking only what is interesting to
the behaviour changed in the original commit for that test case).
This patch also removes the test case for using --obj. The
tools/llvm-symbolizer/basic.s test already tests this case. Finally,
this patch adds a simple test case to the demangle switch test case to
show that demangling happens by default.
See https://bugs.llvm.org/show_bug.cgi?id=40070#c1 for the motivation.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57446
llvm-svn: 352754
This change migrates most llvm-symbolizer tests away from reading input
via stdin and instead using --obj + positional arguments for the file
and addresses respectively, which makes the tests easier to read.
One exception is the test test/tools/llvm-symbolizer/pdb/pdb.test, which
was doing some manipulation on the input addresses. This patch
simplifies this somewhat, but it still reads from stdin.
More changes to follow to simplify/break-up other tests.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57441
llvm-svn: 352752
Summary:
This adds support for the --discard-locals flag, which acts similarly to --discard-all, except it only applies to compiler-generated symbols (i.e. symbols starting with `.L` in ELF).
I am not sure about COFF local symbols: those appear to also use `.L` in most cases, but also use just `L` in other cases, so for now I am just leaving it unimplemented there.
Fixes PR36160
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Reviewed By: jhenderson
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57248
llvm-svn: 352626
Summary: Do some more error cleanup, removing some dependencies from llvm-objcopy's error/reportError in [ELF/COFF]Objcopy methods.
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57423
llvm-svn: 352625
George Rimar