crashes or wrong code with codegen of large integers:
eliminate the legacy getIntegerVTBitMask and
getIntegerVTSignBit methods, which returned their
value as a uint64_t, so couldn't handle huge types.
llvm-svn: 63494
returned by getShiftAmountTy may be too small
to hold shift values (it is an i8 on x86-32).
Before and during type legalization, use a large
but legal type for shift amounts: getPointerTy;
afterwards use getShiftAmountTy, fixing up any
shift amounts with a big type during operation
legalization. Thanks to Dan for writing the
original patch (which I shamelessly pillaged).
llvm-svn: 63482
new isOperationLegalOrCustom, which does what isOperationLegal
previously did.
Update a bunch of callers to use isOperationLegalOrCustom
instead of isOperationLegal. In some case it wasn't obvious
which behavior is desired; when in doubt I changed then to
isOperationLegalOrCustom as that preserves their previous
behavior.
This is for the second half of PR3376.
llvm-svn: 63212
a uint64_t to verify that the value is in range for the given type,
to help catch accidental overflow. Fix a few places that relied on
getConstant implicitly truncating the value.
llvm-svn: 63128
- Ensure that (operation) legalization emits proper FDIV libcall when needed.
- Fix various bugs encountered during llvm-spu-gcc build, along with various
cleanups.
- Start supporting double precision comparisons for remaining libgcc2 build.
Discovered interesting DAGCombiner feature, which is currently solved via
custom lowering (64-bit constants are not legal on CellSPU, but DAGCombiner
insists on inserting one anyway.)
- Update README.
llvm-svn: 62664
promote from i1 all the way up to the canonical SetCC type.
In order to discover an appropriate type to use, pass
MVT::Other to getSetCCResultType. In order to be able to
do this, change getSetCCResultType to take a type as an
argument, not a value (this is also more logical).
llvm-svn: 61542
This removes all the _8, _16, _32, and _64 opcodes and replaces each
group with an unsuffixed opcode. The MemoryVT field of the AtomicSDNode
is now used to carry the size information. In tablegen, the size-specific
opcodes are replaced by size-independent opcodes that utilize the
ability to compose them with predicates.
This shrinks the per-opcode tables and makes the code that handles
atomics much more concise.
llvm-svn: 61389
width register load followed by a truncating
store for the copy, since the load will not place
the value in the lower bits. Probably partial
loads/stores can never happen here, but fix it
anyway.
llvm-svn: 60972
use of illegal integer types: instead, use a stack slot
and copying via integer registers. The existing code
is still used if the bitconvert is to a legal integer
type.
This fires on the PPC testcases 2007-09-08-unaligned.ll
and vec_misaligned.ll. It looks like equivalent code
is generated with these changes, just permuted, but
it's hard to tell.
With these changes, nothing in LegalizeDAG produces
illegal integer types anymore. This is a prerequisite
for removing the LegalizeDAG type legalization code.
While there I noticed that the existing code doesn't
handle trunc store of f64 to f32: it turns this into
an i64 store, which represents a 4 byte stack smash.
I added a FIXME about this. Hopefully someone more
motivated than I am will take care of it.
llvm-svn: 60964
Fix the shift amount when unrolling a vector shift into scalar shifts.
Fix problem in getShuffleScalarElt where it assumes that the input of
a bit convert must be a vector.
llvm-svn: 60740
ReplaceNodeResults: rather than returning a node which
must have the same number of results as the original
node (which means mucking around with MERGE_VALUES,
and which is also easy to get wrong since SelectionDAG
folding may mean you don't get the node you expect),
return the results in a vector.
llvm-svn: 60348
support targets that support these conversions. Users should avoid using
this node as the current targets don't generating code for it.
llvm-svn: 59001
This is Chris' patch from the PR, modified to realize that
SETUGT/SETULT occur legitimately with integers, plus
two fixes in LegalizeDAG to pass a valid result type into
LegalizeSetCC. The argument of TLI.getSetCCResultType is
ignored on PPC, but I think I'm following usage elsewhere.
llvm-svn: 58871
The same one Apple gcc uses, faster. Also gets the
extreme case in gcc.c-torture/execute/ieee/rbug.c
correct which we weren't before; this is not
sufficient to get the test to pass though, there
is another bug.
llvm-svn: 57926
i.e. conditions that cannot be checked with a single instruction. For example,
SETONE and SETUEQ on x86.
- Teach legalizer to implement *illegal* setcc as a and / or of a number of
legal setcc nodes. For now, only implement FP conditions. e.g. SETONE is
implemented as SETO & SETNE, SETUEQ is SETUO | SETEQ.
- Move x86 target over.
llvm-svn: 57542
Completely eliminate the TopOrder std::vector. Instead, sort
the AllNodes list in place. This also eliminates the need to
call AllNodes.size(), a linear-time operation, before
performing the sort.
Also, eliminate the Sources temporary std::vector, since it
essentially duplicates the sorted result as it is being
built.
This also changes the direction of the topological sort
from bottom-up to top-down. The AllNodes list starts out in
roughly top-down order, so this reduces the amount of
reordering needed. Top-down is also more convenient for
Legalize, and ISel needed only minor adjustments.
llvm-svn: 56867
its size). Adjust various lowering functions to
pass this info through from CallInst. Use it to
implement sseregparm returns on X86. Remove
X86_ssecall calling convention.
llvm-svn: 56677
ConstantPoolSDNode, using the target's preferred alignment for the
constant type.
In LegalizeDAG, when performing loads from the constant pool, the
ConstantPoolSDNode's alignment is used in the calls to getLoad and
getExtLoad.
This change prevents SelectionDAG::getLoad/getExtLoad from incorrectly
choosing the ABI alignment for constant pool loads when Alignment == 0.
The incorrect alignment is only a performance issue when ABI alignment
does not equal preferred alignment (i.e., on x86 it was generating
MOVUPS instead of MOVAPS for v4f32 constant loads when the default ABI
alignment for 128bit vectors is forced to 1 byte.)
Patch by Paul Redmond!
llvm-svn: 56253
- Add linkage to SymbolSDNode (default to external).
- Change ISD::ExternalSymbol to ISD::Symbol.
- Change ISD::TargetExternalSymbol to ISD::TargetSymbol
These changes pave the way to allowing SymbolSDNodes with non-external linkage.
llvm-svn: 56249
ConstantFP* instead of APInt and APFloat directly.
This reduces the amount of time to create ConstantSDNode
and ConstantFPSDNode nodes when ConstantInt* and ConstantFP*
respectively are already available, as is the case in
SelectionDAGBuild.cpp. Also, it reduces the amount of time
to legalize constants into constant pools, and the amount of
time to add ConstantFP operands to MachineInstrs, due to
eliminating ConstantInt::get and ConstantFP::get calls.
It increases the amount of work needed to create new constants
in cases where the client doesn't already have a ConstantInt*
or ConstantFP*, such as legalize expanding 64-bit integer constants
to 32-bit constants. And it adds a layer of indirection for the
accessor methods. But these appear to be outweight by the benefits
in most cases.
It will also make it easier to make ConstantSDNode and
ConstantFPNode more consistent with ConstantInt and ConstantFP.
llvm-svn: 56162
ATOMIC_LOAD_ADD_{8,16,32,64} instead of ATOMIC_LOAD_ADD.
Increased the Hardcoded Constant OpActionsCapacity to match.
Large but boring; no functional change.
This is to support partial-word atomics on ppc; i8 is
not a valid type there, so by the time we get to lowering, the
ATOMIC_LOAD nodes looks the same whether the type was i8 or i32.
The information can be added to the AtomicSDNode, but that is the
largest SDNode; I don't fully understand the SDNode allocation,
but it is sensitive to the largest node size, so increasing
that must be bad. This is the alternative.
llvm-svn: 55457
of two, and to not need a scratch std::vector. Also, use the
SelectionDAG's topological sort in LegalizeDAG instead of having
a separate implementation.
llvm-svn: 55389
generic SDNode's (nodes with their own constructors
should do sanity checking in the constructor). Add
sanity checks for BUILD_VECTOR and fix all the places
that were producing bogus BUILD_VECTORs, as found by
"make check". My favorite is the BUILD_VECTOR with
only two operands that was being used to build a
vector with four elements!
llvm-svn: 53850
that fixed problems in EmitStackConvert where the source and target type
have different alignment by creating a stack slot with the max
alignment of source and target type.
llvm-svn: 53150
hook for each way in which a result type can be
legalized (promotion, expansion, softening etc),
just use one: ReplaceNodeResults, which returns
a node with exactly the same result types as the
node passed to it, but presumably with a bunch of
custom code behind the scenes. No change if the
new LegalizeTypes infrastructure is not turned on.
llvm-svn: 53137
to be passed the list of value types, and use this
where appropriate. Inappropriate places are where
the value type list is already known and may be
long, in which case the existing method is more
efficient.
llvm-svn: 53035
the need for a flavor operand, and add a new SDNode subclass,
LabelSDNode, for use with them to eliminate the need for a label id
operand.
Change instruction selection to let these label nodes through
unmodified instead of creating copies of them. Teach the MachineInstr
emitter how to emit a MachineInstr directly from an ISD label node.
This avoids the need for allocating SDNodes for the label id and
flavor value, as well as SDNodes for each of the post-isel label,
label id, and label flavor.
llvm-svn: 52943
purpose, and give it a custom SDNode subclass so that it doesn't
need to have line number, column number, filename string, and
directory string, all existing as individual SDNodes to be the
operands.
This was the only user of ISD::STRING, StringSDNode, etc., so
remove those and some associated code.
This makes stop-points considerably easier to read in
-view-legalize-dags output, and reduces overhead (creating new
nodes and copying std::strings into them) on code containing
debugging information.
llvm-svn: 52924
it impossible to create a MERGE_VALUES node with
only one result: sometimes it is useful to be able
to create a node with only one result out of one of
the results of a node with more than one result, for
example because the new node will eventually be used
to replace a one-result node using ReplaceAllUsesWith,
cf X86TargetLowering::ExpandFP_TO_SINT. On the other
hand, most users of MERGE_VALUES don't need this and
for them the optimization was valuable. So add a new
utility method getMergeValues for creating MERGE_VALUES
nodes which by default performs the optimization.
Change almost everywhere to use getMergeValues (and
tidy some stuff up at the same time).
llvm-svn: 52893
Added abstract class MemSDNode for any Node that have an associated MemOperand
Changed atomic.lcs => atomic.cmp.swap, atomic.las => atomic.load.add, and
atomic.lss => atomic.load.sub
llvm-svn: 52706
fixes PR2476; patch by Richard Osborne. The same
problem exists for a bunch of other operators, but
I'm ignoring this because they will be automagically
fixed when the new LegalizeTypes infrastructure lands,
since it already solves this problem centrally.
llvm-svn: 52610
wrong for volatile loads and stores. In fact this
is almost all of them! There are three types of
problems: (1) it is wrong to change the width of
a volatile memory access. These may be used to
do memory mapped i/o, in which case a load can have
an effect even if the result is not used. Consider
loading an i32 but only using the lower 8 bits. It
is wrong to change this into a load of an i8, because
you are no longer tickling the other three bytes. It
is also unwise to make a load/store wider. For
example, changing an i16 load into an i32 load is
wrong no matter how aligned things are, since the
fact of loading an additional 2 bytes can have
i/o side-effects. (2) it is wrong to change the
number of volatile load/stores: they may be counted
by the hardware. (3) it is wrong to change a volatile
load/store that requires one memory access into one
that requires several. For example on x86-32, you
can store a double in one processor operation, but to
store an i64 requires two (two i32 stores). In a
multi-threaded program you may want to bitcast an i64
to a double and store as a double because that will
occur atomically, and be indivisible to other threads.
So it would be wrong to convert the store-of-double
into a store of an i64, because this will become two
i32 stores - no longer atomic. My policy here is
to say that the number of processor operations for
an illegal operation is undefined. So it is alright
to change a store of an i64 (requires at least two
stores; but could be validly lowered to memcpy for
example) into a store of double (one processor op).
In short, if the new store is legal and has the same
size then I say that the transform is ok. It would
also be possible to say that transforms are always
ok if before they were illegal, whether after they
are illegal or not, but that's more awkward to do
and I doubt it buys us anything much.
However this exposed an interesting thing - on x86-32
a store of i64 is considered legal! That is because
operations are marked legal by default, regardless of
whether the type is legal or not. In some ways this
is clever: before type legalization this means that
operations on illegal types are considered legal;
after type legalization there are no illegal types
so now operations are only legal if they really are.
But I consider this to be too cunning for mere mortals.
Better to do things explicitly by testing AfterLegalize.
So I have changed things so that operations with illegal
types are considered illegal - indeed they can never
map to a machine operation. However this means that
the DAG combiner is more conservative because before
it was "accidentally" performing transforms where the
type was illegal because the operation was nonetheless
marked legal. So in a few such places I added a check
on AfterLegalize, which I suppose was actually just
forgotten before. This causes the DAG combiner to do
slightly more than it used to, which resulted in the X86
backend blowing up because it got a slightly surprising
node it wasn't expecting, so I tweaked it.
llvm-svn: 52254
of apint codegen failure is the DAG combiner doing
the wrong thing because it was comparing MVT's using
< rather than comparing the number of bits. Removing
the < method makes this mistake impossible to commit.
Instead, add helper methods for comparing bits and use
them.
llvm-svn: 52098
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
llvm-svn: 52044
Rename SDOperandImpl back to SDOperand.
Introduce the SDUse class that represents a use of the SDNode referred by
an SDOperand. Now it is more similar to Use/Value classes.
Patch is approved by Dan Gohman.
llvm-svn: 49795
on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.
Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.
This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.
Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.
This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.
llvm-svn: 49572
LLVM Value/Use does and MachineRegisterInfo/MachineOperand does.
This allows constant time for all uses list maintenance operations.
The idea was suggested by Chris. Reviewed by Evan and Dan.
Patch is tested and approved by Dan.
On normal use-cases compilation speed is not affected. On very big basic
blocks there are compilation speedups in the range of 15-20% or even better.
llvm-svn: 48822
flags. This is needed by the new legalize types
infrastructure which wants to expand the 64 bit
constants previously used to hold the flags on
32 bit machines. There are two functional changes:
(1) in LowerArguments, if a parameter has the zext
attribute set then that is marked in the flags;
before it was being ignored; (2) PPC had some bogus
code for handling two word arguments when using the
ELF 32 ABI, which was hard to convert because of
the bogusness. As suggested by the original author
(Nicolas Geoffray), I've disabled it for the moment.
Tested with "make check" and the Ada ACATS testsuite.
llvm-svn: 48640
and it's the result that requires expansion. This code is a little confusing
because the TargetLoweringInfo tables for [US]INT_TO_FP use the operand type
(the integer type) rather than the result type.
llvm-svn: 48206
of BUILD_VECTORS that only have two unique elements:
1. The previous code was nondeterminstic, because it walked a map in
SDOperand order, which isn't determinstic.
2. The previous code didn't handle the case when one element was undef
very well. Now we ensure that the generated shuffle mask has the
undef vector on the RHS (instead of potentially being on the LHS)
and that any elements that refer to it are themselves undef. This
allows us to compile CodeGen/X86/vec_set-9.ll into:
_test3:
movd %rdi, %xmm0
punpcklqdq %xmm0, %xmm0
ret
instead of:
_test3:
movd %rdi, %xmm1
#IMPLICIT_DEF %xmm0
punpcklqdq %xmm1, %xmm0
ret
... saving a register.
llvm-svn: 48060
bug in r47928 (Int64Ty is the correct type for the constant
pool entry here) and removes the asserts, now that the code
is capable of handling i128.
llvm-svn: 47932
For x86, if sse2 is available, it's not a good idea since cvtss2sd is slower than a movsd load and it prevents load folding. On x87, it's important to shrink fp constant since fldt is very expensive.
llvm-svn: 47931
same size as an int type by doing a bitconvert of
load/store of the int type (same algorithm as floating point).
This makes them work for ppc Altivec. There was some
code that purported to handle loads of (some) vectors
by splitting them into two smaller vectors, but getExtLoad
rejects subvector loads, so this could never have worked;
the patch removes it.
llvm-svn: 47696
tblgen will complain if a sign-extended constant does not fit into a
data type smaller than i32, e.g., i16. This causes a problem when certain
hex constants are used, such as 0xff for byte masks or immediate xor
values.
tblgen will try the sign-extended value first and, if the sign extended
value would overflow, it tries to see if the unsigned value will fit.
Consequently, a software developer can now safely incant:
(XORHIr16 R16C:$rA, 0xffff)
which is somewhat clearer and more informative than incanting:
(XORHIr16 R16C:$rA, (i16 -1))
even if the two are bitwise equivalent.
Tblgen also outputs the 64-bit unsigned constant in the generated ISel code
when getTargetConstant() is invoked.
llvm-svn: 47188
the return value is zero-extended if it isn't
sign-extended. It may also be any-extended.
Also, if a floating point value was returned
in a larger floating point type, pass 1 as the
second operand to FP_ROUND, which tells it
that all the precision is in the original type.
I think this is right but I could be wrong.
Finally, when doing libcalls, set isZExt on
a parameter if it is "unsigned". Currently
isSExt is set when signed, and nothing is
set otherwise. This should be right for all
calls to standard library routines.
llvm-svn: 47122
1) ConstantFP is now expand by default
2) ConstantFP is not turned into TargetConstantFP during Legalize
if it is legal.
This allows ConstantFP to be handled like Constant, allowing for
targets that can encode FP immediates as MachineOperands.
As a bonus, fix up Itanium FP constants, which now correctly match,
and match more constants! Hooray.
llvm-svn: 47121
initializer problem, a minor tweak to the way the
DAGISelEmitter finds load/store nodes, and a renaming of the
new PseudoSourceValue objects.
llvm-svn: 46827
Added ISD::DECLARE node type to represent llvm.dbg.declare intrinsic. Now the intrinsic calls are lowered into a SDNode and lives on through out the codegen passes.
For now, since all the debugging information recording is done at isel time, when a ISD::DECLARE node is selected, it has the side effect of also recording the variable. This is a short term solution that should be fixed in time.
llvm-svn: 46659
in the backend. Introduce a new SDNode type, MemOperandSDNode, for
holding a MemOperand in the SelectionDAG IR, and add a MemOperand
list to MachineInstr, and code to manage them. Remove the offset
field from SrcValueSDNode; uses of SrcValueSDNode that were using
it are all all using MemOperandSDNode now.
Also, begin updating some getLoad and getStore calls to use the
PseudoSourceValue objects.
Most of this was written by Florian Brander, some
reorganization and updating to TOT by me.
llvm-svn: 46585
and StoreSDNode into their common base class LSBaseSDNode. Member
functions getLoadedVT and getStoredVT are replaced with the common
getMemoryVT to simplify code that will handle both loads and stores.
llvm-svn: 46538
precision integers. This won't actually work
(and most of the code is dead) unless the new
legalization machinery is turned on. While
there, I rationalized the handling of i1, and
removed some bogus (and unused) sextload patterns.
For i1, this could result in microscopically
better code for some architectures (not X86).
It might also result in worse code if annotating
with AssertZExt nodes turns out to be more harmful
than helpful.
llvm-svn: 46280
integers. Handle truncstore of a legal type to an unusual
number of bits. Most of this code is not reachable unless
the new legalize infrastructure is turned on.
llvm-svn: 46249
1. Legalize now always promotes truncstore of i1 to i8.
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
safe.
The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:
_foo:
fldt 20(%esp)
fldt 4(%esp)
faddp %st(1)
movl 36(%esp), %eax
fstps (%eax)
ret
instead of:
_foo:
subl $4, %esp
fldt 24(%esp)
fldt 8(%esp)
faddp %st(1)
fstps (%esp)
movl 40(%esp), %eax
movss (%esp), %xmm0
movss %xmm0, (%eax)
addl $4, %esp
ret
llvm-svn: 46140
and switch various codegen pieces and the X86 backend over
to using it.
* Add some comments to SelectionDAGNodes.h
* Introduce a second argument to FP_ROUND, which indicates
whether the FP_ROUND changes the value of its input. If
not it is safe to xform things like fp_extend(fp_round(x)) -> x.
llvm-svn: 46125
into the ANY_EXTEND/ZERO_EXTEND/SIGN_EXTEND code to simplify it.
Unmerge the code for FP_ROUND and FP_EXTEND from each other to
make each one simpler.
llvm-svn: 46061
Likewise fix up a bunch of other libcalls. While
there I remove NEG_F32 and NEG_F64 since they are
not used anywhere. This fixes 9 Ada ACATS failures.
llvm-svn: 45833
values, which means doing extra legalization work.
It would be easier to get this kind of thing right if
there was some documentation...
llvm-svn: 45472
that "machine" classes are used to represent the current state of
the code being compiled. Given this expanded name, we can start
moving other stuff into it. For now, move the UsedPhysRegs and
LiveIn/LoveOuts vectors from MachineFunction into it.
Update all the clients to match.
This also reduces some needless #includes, such as MachineModuleInfo
from MachineFunction.
llvm-svn: 45467
1) Change the interface to TargetLowering::ExpandOperationResult to
take and return entire NODES that need a result expanded, not just
the value. This allows us to handle things like READCYCLECOUNTER,
which returns two values.
2) Implement (extremely limited) support in LegalizeDAG::ExpandOp for MERGE_VALUES.
3) Reimplement custom lowering in LegalizeDAGTypes in terms of the new
ExpandOperationResult. This makes the result simpler and fully
general.
4) Implement (fully general) expand support for MERGE_VALUES in LegalizeDAGTypes.
5) Implement ExpandOperationResult support for ARM f64->i64 bitconvert and ARM
i64 shifts, allowing them to work with LegalizeDAGTypes.
6) Implement ExpandOperationResult support for X86 READCYCLECOUNTER and FP_TO_SINT,
allowing them to work with LegalizeDAGTypes.
LegalizeDAGTypes now passes several more X86 codegen tests when enabled and when
type legalization in LegalizeDAG is ifdef'd out.
llvm-svn: 44300
Fix a couple of problems:
1. Don't assume the VT-1 is a VT that is half the size.
2. Treat vectors of FP in the vector path, not the FP path.
This has a couple of remaining problems before it will work with
the code in PR1811: the code below this change assumes that it can
use extload/shift/or to construct the result, which isn't right for
vectors.
This also doesn't handle vectors of 1 or vectors that aren't pow-2.
llvm-svn: 44243
adjustment fields, and an optional flag. If there is a "dynamic_stackalloc" in
the code, make sure that it's bracketed by CALLSEQ_START and CALLSEQ_END. If
not, then there is the potential for the stack to be changed while the stack's
being used by another instruction (like a call).
This can only result in tears...
llvm-svn: 44037
The meaning of getTypeSize was not clear - clarifying it is important
now that we have x86 long double and arbitrary precision integers.
The issue with long double is that it requires 80 bits, and this is
not a multiple of its alignment. This gives a primitive type for
which getTypeSize differed from getABITypeSize. For arbitrary precision
integers it is even worse: there is the minimum number of bits needed to
hold the type (eg: 36 for an i36), the maximum number of bits that will
be overwriten when storing the type (40 bits for i36) and the ABI size
(i.e. the storage size rounded up to a multiple of the alignment; 64 bits
for i36).
This patch removes getTypeSize (not really - it is still there but
deprecated to allow for a gradual transition). Instead there is:
(1) getTypeSizeInBits - a number of bits that suffices to hold all
values of the type. For a primitive type, this is the minimum number
of bits. For an i36 this is 36 bits. For x86 long double it is 80.
This corresponds to gcc's TYPE_PRECISION.
(2) getTypeStoreSizeInBits - the maximum number of bits that is
written when storing the type (or read when reading it). For an
i36 this is 40 bits, for an x86 long double it is 80 bits. This
is the size alias analysis is interested in (getTypeStoreSize
returns the number of bytes). There doesn't seem to be anything
corresponding to this in gcc.
(3) getABITypeSizeInBits - this is getTypeStoreSizeInBits rounded
up to a multiple of the alignment. For an i36 this is 64, for an
x86 long double this is 96 or 128 depending on the OS. This is the
spacing between consecutive elements when you form an array out of
this type (getABITypeSize returns the number of bytes). This is
TYPE_SIZE in gcc.
Since successive elements in a SequentialType (arrays, pointers
and vectors) need to be aligned, the spacing between them will be
given by getABITypeSize. This means that the size of an array
is the length times the getABITypeSize. It also means that GEP
computations need to use getABITypeSize when computing offsets.
Furthermore, if an alloca allocates several elements at once then
these too need to be aligned, so the size of the alloca has to be
the number of elements multiplied by getABITypeSize. Logically
speaking this doesn't have to be the case when allocating just
one element, but it is simpler to also use getABITypeSize in this
case. So alloca's and mallocs should use getABITypeSize. Finally,
since gcc's only notion of size is that given by getABITypeSize, if
you want to output assembler etc the same as gcc then getABITypeSize
is the size you want.
Since a store will overwrite no more than getTypeStoreSize bytes,
and a read will read no more than that many bytes, this is the
notion of size appropriate for alias analysis calculations.
In this patch I have corrected all type size uses except some of
those in ScalarReplAggregates, lib/Codegen, lib/Target (the hard
cases). I will get around to auditing these too at some point,
but I could do with some help.
Finally, I made one change which I think wise but others might
consider pointless and suboptimal: in an unpacked struct the
amount of space allocated for a field is now given by the ABI
size rather than getTypeStoreSize. I did this because every
other place that reserves memory for a type (eg: alloca) now
uses getABITypeSize, and I didn't want to make an exception
for unpacked structs, i.e. I did it to make things more uniform.
This only effects structs containing long doubles and arbitrary
precision integers. If someone wants to pack these types more
tightly they can always use a packed struct.
llvm-svn: 43620
of offset and the alignment of ptr if these are both powers of
2. While the ptr alignment is guaranteed to be a power of 2,
there is no reason to think that offset is. For example, if
offset is 12 (the size of a long double on x86-32 linux) and
the alignment of ptr is 8, then the alignment of ptr+offset
will in general be 4, not 8. Introduce a function MinAlign,
lifted from gcc, for computing the minimum guaranteed alignment.
I've tried to fix up everywhere under lib/CodeGen/SelectionDAG/.
I also changed some places that weren't wrong (because both values
were a power of 2), as a defensive change against people copying
and pasting the code.
Hopefully someone who cares about alignment will review the rest
of LLVM and fix up the remaining places. Since I'm on x86 I'm
not very motivated to do this myself...
llvm-svn: 43421
To do this it is necessary to add a "always inline" argument to the
memcpy node. For completeness I have also added this node to memmove
and memset. I have also added getMem* functions, because the extra
argument makes it cumbersome to use getNode and because I get confused
by it :-)
llvm-svn: 43172
types. This is needed for SIGN_EXTEND_INREG at least.
It is not clear if this is correct for other operations.
On the other hand, for the various load/store actions
it seems to correct to return the type action, as is
currently done.
Also, it seems that SelectionDAG::getValueType can be
called for extended value types; introduce a map for
holding these, since we don't really want to extend
the vector to be 2^32 pointers long!
Generalize DAGTypeLegalizer::PromoteResult_TRUNCATE
and DAGTypeLegalizer::PromoteResult_INT_EXTEND to handle
the various funky possibilities that apints introduce,
for example that you can promote to a type that needs
to be expanded.
llvm-svn: 43071
Make two changes:
1) only xform "store of f32" if i32 is a legal type for the target.
2) only xform "store of f64" if either i64 or i32 are legal for the target.
3) if i64 isn't legal, manually lower to 2 stores of i32 instead of letting a
later pass of legalize do it. This is ugly, but helps future changes I'm
about to commit.
llvm-svn: 42980
Factor out the code that expands the "nasty scalar code" for unrolling
vectors into a separate routine, teach it how to handle mixed
vector/scalar operands, as seen in powi, and use it for several operators,
including sin, cos, powi, and pow.
Add support in SplitVectorOp for fpow, fpowi and for several unary
operators.
llvm-svn: 42884
No compile-time support for constant operations yet,
just format transformations. Make readers and
writers work. Split constants into 2 doubles in
Legalize.
llvm-svn: 42865
use ISD::{S,U}DIVREM and ISD::{S,U}MUL_HIO. Move the lowering code
associated with these operators into target-independent in LegalizeDAG.cpp
and TargetLowering.cpp.
llvm-svn: 42762
input. APInt unfortunately zero-extends signed integers, so Dale
modified the function to expect zero-extended input. Make this
assumption explicit in the function name.
llvm-svn: 42732
basic arithmetic works.
Rename RTLIB long double functions to distinguish
different flavors of long double; the lib functions
have different names, alas.
llvm-svn: 42644
bit width instead of number of words allocated, which
makes it actually work for int->APF conversions.
Adjust callers. Add const to one of the APInt constructors
to prevent surprising match when called with const
argument.
llvm-svn: 42210
double from some of the many places in the optimizers
it appears, and do something reasonable with x86
long double.
Make APInt::dump() public, remove newline, use it to
dump ConstantSDNode's.
Allow APFloats in FoldingSet.
Expand X86 backend handling of long doubles (conversions
to/from int, mostly).
llvm-svn: 41967
access to bits). Use them in place of float and
double interfaces where appropriate.
First bits of x86 long double constants handling
(untested, probably does not work).
llvm-svn: 41858
Add APFloat interfaces to ConstantFP, SelectionDAG.
Fix integer bit in double->APFloat conversion.
Convert LegalizeDAG to use APFloat interface in
ConstantFPSDNode uses.
llvm-svn: 41587
(constants are still not handled). Adds ConvertActions
to control fp-to-fp conversions (these are currently
defaulted for all other targets, so no changes there).
llvm-svn: 40958
This patch fills the last necessary bits to enable exceptions
handling in LLVM. Currently only on x86-32/linux.
In fact, this patch adds necessary intrinsics (and their lowering) which
represent really weird target-specific gcc builtins used inside unwinder.
After corresponding llvm-gcc patch will land (easy) exceptions should be
more or less workable. However, exceptions handling support should not be
thought as 'finished': I expect many small and not so small glitches
everywhere.
llvm-svn: 39855
extended vector types. Remove the special SDNode opcodes used for pre-legalize
vector operations, and the special MVT::Vector type used with them. Adjust
lowering and legalize to work with the normal SDNode kinds instead, and to
use the normal MVT functions to work with vector types instead of using the
two special operands that the pre-legalize nodes held.
This allows pre-legalize and post-legalize DAGs, and the code that operates
on them, to be more consistent. Pre-legalize vector operators can be handled
more consistently with scalar operators. And, -view-dag-combine1-dags and
-view-legalize-dags now look prettier for vector code.
llvm-svn: 37719
TargetLowering to SelectionDAG so that they have more convenient
access to the current DAG, in preparation for the ValueType routines
being changed from standalone functions to members of SelectionDAG for
the pre-legalize vector type changes.
llvm-svn: 37704
VCONCAT_VECTORS. Use these for CopyToReg and CopyFromReg legalizing in
the case that the full register is to be split into subvectors instead
of scalars. This replaces uses of VBIT_CONVERT to present values as
vector-of-vector types in order to make whole subvectors accessible via
BUILD_VECTOR and EXTRACT_VECTOR_ELT.
This is in preparation for adding extended ValueType values, where
having vector-of-vector types is undesirable.
llvm-svn: 37569
Implement support for expanding a bitcast from an illegal vector type to
a legal one (e.g. 4xi32 -> 4xf32 in SSE1). This fixes PR1371 and
CodeGen/X86/2007-05-05-VecCastExpand.ll
llvm-svn: 36787
If the operand is not already an indirect operand, spill it to a constant
pool entry or a stack slot.
This fixes PR1356 and CodeGen/X86/2007-04-27-InlineAsm-IntMemInput.ll
llvm-svn: 36536
2. Help DAGCombiner recognize zero/sign/any-extended versions of ROTR and ROTL
patterns. This was motivated by the X86/rotate.ll testcase, which should now
generate code for other platforms (and soon-to-come platforms.) Rewrote code
slightly to make it easier to read.
llvm-svn: 35605
the lo-reg first. This is fallout from my ppc calling conv change yesterday,
it fixes test/ExecutionEngine/2003-05-06-LivenessClobber.llx
llvm-svn: 34983
1. New parameter attribute called 'inreg'. It has meaning "place this
parameter in registers, if possible". This is some generalization of
gcc's regparm(n) attribute. It's currently used only in X86-32 backend.
2. Completely rewritten CC handling/lowering code inside X86 backend.
Merged stdcall + c CCs and fastcall + fast CC.
3. Dropped CSRET CC. We cannot add struct return variant for each
target-specific CC (e.g. stdcall + csretcc and so on).
4. Instead of CSRET CC introduced 'sret' parameter attribute. Setting in
on first attribute has meaning 'This is hidden pointer to structure
return. Handle it gently'.
5. Fixed small bug in llvm-extract + add new feature to
FunctionExtraction pass, which relinks all internal-linkaged callees
from deleted function to external linkage. This will allow further
linking everything together.
NOTEs: 1. Documentation will be updated soon.
2. llvm-upgrade should be improved to translate csret => sret.
Before this, there will be some unexpected test fails.
llvm-svn: 33597
This is the final patch for this PR. It implements some minor cleanup
in the use of IntegerType, to wit:
1. Type::getIntegerTypeMask -> IntegerType::getBitMask
2. Type::Int*Ty changed to IntegerType* from Type*
3. ConstantInt::getType() returns IntegerType* now, not Type*
This also fixes PR1120.
Patch by Sheng Zhou.
llvm-svn: 33370
Three changes:
1. Convert signed integer types to signless versions.
2. Implement the @sext and @zext parameter attributes. Previously the
type of an function parameter was used to determine whether it should
be sign extended or zero extended before the call. This information is
now communicated via the function type's parameter attributes.
3. The interface to LowerCallTo had to be changed in order to accommodate
the parameter attribute information. Although it would have been
convenient to pass in the FunctionType itself, there isn't always one
present in the caller. Consequently, a signedness indication for the
result type and for each parameter was provided for in the interface
to this method. All implementations were changed to make the adjustment
necessary.
llvm-svn: 32788
its expansion result type is equal to the result type of the bit_convert,
e.g. (i64 bit_convert (f64 op)) if FP is not legal
returns the result of the expanded source operand.
- Store f32 / f64 may be expanded to a single store i32/i64.
llvm-svn: 32490
Turn on -Wunused and -Wno-unused-parameter. Clean up most of the resulting
fall out by removing unused variables. Remaining warnings have to do with
unused functions (I didn't want to delete code without review) and unused
variables in generated code. Maintainers should clean up the remaining
issues when they see them. All changes pass DejaGnu tests and Olden.
llvm-svn: 31380
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.
llvm-svn: 31063
in the start of an array and a count of operands where applicable. In many
cases, the number of operands is known, so this static array can be allocated
on the stack, avoiding the heap. In many other cases, a SmallVector can be
used, which has the same benefit in the common cases.
I updated a lot of code calling getNode that takes a vector, but ran out of
time. The rest of the code should be updated, and these methods should be
removed.
We should also do the same thing to eliminate the methods that take a
vector of MVT::ValueTypes.
It would be extra nice to convert the dagiselemitter to avoid creating vectors
for operands when calling getTargetNode.
llvm-svn: 29566
use UpdateNodeOperands to just update the operands! This is important because
getNode will allocate a new node if the node returns a flag and this breaks
assumptions in the legalizer that you can legalize some things multiple times
and get exactly the same results.
This latent bug was exposed by my ppc patch last night, and this fixes
gsm/toast.
llvm-svn: 28348
x86 and ppc for 100% dense switch statements when relocations are non-PIC.
This support will be extended and enhanced in the coming days to support
PIC, and less dense forms of jump tables.
llvm-svn: 27947
store vector to $esp
store element to $esp + sizeof(VT) * index
load vector from $esp
The bug is VT is the type of the vector element, not the type of the vector!
llvm-svn: 27517
promoted/expanded (e.g. SCALAR_TO_VECTOR from i8/i16 on PPC).
* Add support for targets to request that VECTOR_SHUFFLE nodes be promoted
to a canonical type, for example, we only want v16i8 shuffles on PPC.
* Move isShuffleLegal out of TLI into Legalize.
* Teach isShuffleLegal to allow shuffles that need to be promoted.
llvm-svn: 27399
into elements and operate on each piece. This allows generic vector integer
multiplies to work on PPC, though the generated code is horrible.
llvm-svn: 27347
needs to be promoted or expanded. Relegalize the scalar store once created.
This fixes CodeGen/Generic/vector.ll:test1 on non-SSE x86 targets.
llvm-svn: 27293
Dale Johannesen