https://reviews.llvm.org/D67133
While investigating some non determinism (CSE doesn't produce wrong
code, it just doesn't CSE some times) in GISel CSE on an out of tree
target, I realized that the core issue was that there were lots of code
that mutates (setReg, setRegClass etc), but doesn't notify observers
(CSE in this case but this could be any other observer). In order to
make the Observer be available in various parts of code and to avoid
having to thread it through various API, the MachineFunction now has the
observer as field. This allows it to be easily used in helper functions
such as constrainOperandRegClass.
Also added some invariant verification method in CSEInfo which can
catch these issues (when CSE is enabled).
Legalization algorithm is complicated by two facts:
1) While regular instructions should be possible to legalize in
an isolated, per-instruction, context-free manner, legalization
artifacts can only be eliminated in pairs, which could be deeply, and
ultimately arbitrary nested: { [ () ] }, where which paranthesis kind
depicts an artifact kind, like extend, unmerge, etc. Such structure
can only be fully eliminated by simple local combines if they are
attempted in a particular order (inside out), or alternatively by
repeated scans each eliminating only one innermost pair, resulting in
O(n^2) complexity.
2) Some artifacts might in fact be regular instructions that could (and
sometimes should) be legalized by the target-specific rules. Which
means failure to eliminate all artifacts on the first iteration is
not a failure, they need to be tried as instructions, which may
produce more artifacts, including the ones that are in fact regular
instructions, resulting in a non-constant number of iterations
required to finish the process.
I trust the recently introduced termination condition (no new artifacts
were created during as-a-regular-instruction-retrial of artifacts not
eliminated on the previous iteration) to be efficient in providing
termination, but only performing the legalization in full if and only if
at each step such chains of artifacts are successfully eliminated in
full as well.
Which is currently not guaranteed, as the artifact combines are applied
only once and in an arbitrary order that has to do with the order of
creation or insertion of artifacts into their worklist, which is a no
particular order.
In this patch I make a small change to the artifact combiner, making it
to re-insert into the worklist immediate (modulo a look-through copies)
artifact users of each vreg that changes its definition due to an
artifact combine.
Here the first scan through the artifacts worklist, while not
being done in any guaranteed order, only needs to find the innermost
pair(s) of artifacts that could be immediately combined out. After that
the process follows def-use chains, making them shorter at each step, thus
combining everything that can be combined in O(n) time.
Reviewers: volkan, aditya_nandakumar, qcolombet, paquette, aemerson, dsanders
Reviewed By: aditya_nandakumar, paquette
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71448
and introducing new unittests/CodeGen/GlobalISel/LegalizerTest.cpp
relying on it to unit test the entire legalizer algorithm (including the
top-level main loop).
See also https://reviews.llvm.org/D71448
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
Currently, Legalizer aborts if it’s unable to legalize artifacts. However, it’s
possible to combine them after processing the rest of the instruction because
the legalization is likely to generate more artifacts that allow ArtifactCombiner
to combine away them.
Instead, move illegal artifacts to another list called RetryList and wait until all of the
instruction in InstList are legalized. After that, check if there is any new artifacts and
try to combine them again if that’s the case. If not, abort. The idea is similar to D59339,
but the approach is a bit different.
This patch fixes the issue described above, but the legalizer still may be unable to handle
some cases depending on when to legalize artifacts. So, in the long run, we probably need
a different legalization strategy that handles this dependency in a better way.
Reviewers: dsanders, aditya_nandakumar, qcolombet, arsenm, aemerson, paquette
Reviewed By: dsanders
Subscribers: jvesely, wdng, nhaehnle, rovka, javed.absar, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65894
llvm-svn: 369805
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
All the GlobalISel passes are initialized when the target calls
initializeGlobalISel(), so we don't need to call the initializers
from the pass constructors.
Reviewers: qcolombet, t.p.northover, paquette, dsanders, aemerson, aditya_nandakumar
Reviewed By: aemerson
Subscribers: rovka, kristof.beyls, hiraditya, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63235
llvm-svn: 363642
* LegalizeAction should be printed by name rather than number
* Newly created instructions are incomplete at the point the observer first sees
them. They are therefore recorded in a small vector and printed just before
the legalizer moves on to another instruction. By this point, the instruction
must be complete.
llvm-svn: 359481
Other opcodes shouldn't be CSE'd until we can be sure debug info quality won't
be degraded.
This change also improves the IRTranslator so that in most places, but not all,
it creates constants using the MIRBuilder directly instead of first creating a
new destination vreg and then creating a constant. By doing this, the
buildConstant() method can just return the vreg of an existing G_CONSTANT
instead of having to create a COPY from it.
I measured a 0.2% improvement in compile time and a 0.9% improvement in code
size at -O0 ARM64.
Compile time:
Program base cse diff
test-suite...ark/tramp3d-v4/tramp3d-v4.test 9.04 9.12 0.8%
test-suite...Mark/mafft/pairlocalalign.test 2.68 2.66 -0.7%
test-suite...-typeset/consumer-typeset.test 5.53 5.51 -0.4%
test-suite :: CTMark/lencod/lencod.test 5.30 5.28 -0.3%
test-suite :: CTMark/Bullet/bullet.test 25.82 25.76 -0.2%
test-suite...:: CTMark/ClamAV/clamscan.test 6.92 6.90 -0.2%
test-suite...TMark/7zip/7zip-benchmark.test 34.24 34.17 -0.2%
test-suite :: CTMark/SPASS/SPASS.test 6.25 6.24 -0.1%
test-suite...:: CTMark/sqlite3/sqlite3.test 1.66 1.66 -0.1%
test-suite :: CTMark/kimwitu++/kc.test 13.61 13.60 -0.0%
Geomean difference -0.2%
Code size:
Program base cse diff
test-suite...-typeset/consumer-typeset.test 1315632 1266480 -3.7%
test-suite...:: CTMark/ClamAV/clamscan.test 1313892 1297508 -1.2%
test-suite :: CTMark/lencod/lencod.test 1439504 1423112 -1.1%
test-suite...TMark/7zip/7zip-benchmark.test 2936980 2904172 -1.1%
test-suite :: CTMark/Bullet/bullet.test 3478276 3445460 -0.9%
test-suite...ark/tramp3d-v4/tramp3d-v4.test 8082868 8033492 -0.6%
test-suite :: CTMark/kimwitu++/kc.test 3870380 3853972 -0.4%
test-suite :: CTMark/SPASS/SPASS.test 1434904 1434896 -0.0%
test-suite...Mark/mafft/pairlocalalign.test 764528 764528 0.0%
test-suite...:: CTMark/sqlite3/sqlite3.test 782092 782092 0.0%
Geomean difference -0.9%
Differential Revision: https://reviews.llvm.org/D60580
llvm-svn: 358369
Because CodeGen can't depend on GlobalISel, we need a way to encapsulate the CSE
configs that can be passed between TargetPassConfig and the targets' custom
pass configs. This CSEConfigBase allows targets to create custom CSE configs
which is then used by the GISel passes for the CSEMIRBuilder.
This support will be used in a follow up commit to allow constant-only CSE for
-O0 compiles in D60580.
llvm-svn: 358368
The artifact combiners push instructions which have been marked for deletion
onto an list for the legalizer to deal with on return. However, for trunc(ext)
combines the combiner routine recursively calls itself. When it does this the
dead instructions list may not be empty, and the other combiners don't expect
to be dealing with essentially invalid MIR (multiple vreg defs etc).
This change fixes it by ensuring that the dead instructions are processed on
entry into tryCombineInstruction.
As a result, this fix exposed a few places in tests where G_TRUNC instructions
were not being deleted even though they were dead.
Differential Revision: https://reviews.llvm.org/D59892
llvm-svn: 357101
https://reviews.llvm.org/D58073
Speed up insertion during the initial populating phase into the
GISelWorkList by deferring repeatedly resizing the DenseMap.
This results in ~10% improvement in the combiner passes, and
~3% speedup in the Legalizer.
reviewed by: aemerson.
llvm-svn: 354093
Try to use the underlying source registers.
This enables legalization in more cases where some irregular
operations are widened and others narrowed.
This seems to make the test_combines_2 AArch64 test worse, since the
MERGE_VALUES has multiple uses. Since this should be required for
legalization, a hasOneUse check is probably inappropriate (or maybe
should only be used if the merge is legal?).
llvm-svn: 353121
https://reviews.llvm.org/D57178
Now add a hook in TargetPassConfig to query if CSE needs to be
enabled. By default this hook returns false only for O0 opt level but
this can be overridden by the target.
As a consequence of the default of enabled for non O0, a few tests
needed to be updated to not use CSE (by passing in -O0) to the run
line.
reviewed by: arsenm
llvm-svn: 352126
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
Summary:
In addition to knowing that an instruction is changed. It's also useful to
know when it's about to change. For example, it might print the instruction so
you can track the changes in a debug log, it might remove it from some queue
while it's being worked on, or it might want to change several instructions as
a single transaction and act on all the changes at once.
Added changingInstr() to all existing uses of changedInstr()
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55623
llvm-svn: 348992
Summary:
There's little of interest that can be done to an already-erased instruction.
You can't inspect it, write it to a debug log, etc. It ought to be notification
that we're about to erase it. Rename the function to clarify the timing of the
event and reflect current usage.
Also fixed one case where we were trying to print an erased instruction.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55611
llvm-svn: 348976
This patch restricts the capability of G_MERGE_VALUES, and uses the new
G_BUILD_VECTOR and G_CONCAT_VECTORS opcodes instead in the appropriate places.
This patch also includes AArch64 support for selecting G_BUILD_VECTOR of <4 x s32>
and <2 x s64> vectors.
Differential Revisions: https://reviews.llvm.org/D53629
llvm-svn: 348788
https://reviews.llvm.org/D54980
This provides a standard API across GISel passes to observe and notify
passes about changes (insertions/deletions/mutations) to MachineInstrs.
This patch also removes the recordInsertion method in MachineIRBuilder
and instead provides method to setObserver.
Reviewed by: vkeles.
llvm-svn: 348406
This re-applies r336929 with a fix to accomodate for the Mips target
scheduling multiple SelectionDAG instances into the pass pipeline.
PrologEpilogInserter and StackColoring depend on the StackProtector analysis
being alive from the point it is run until PEI, which requires that they are all
scheduled in the same FunctionPassManager. Inserting a (machine) ModulePass
between StackProtector and PEI results in these passes being in separate
FunctionPassManagers and the StackProtector is not available for PEI.
PEI and StackColoring don't use much information from the StackProtector pass,
so transfering the required information to MachineFrameInfo is cleaner than
keeping the StackProtector pass around. This commit moves the SSP layout
information to MFI instead of keeping it in the pass.
This patch set (D37580, D37581, D37582, D37583, D37584, D37585, D37586, D37587)
is a first draft of the pagerando implementation described in
http://lists.llvm.org/pipermail/llvm-dev/2017-June/113794.html.
Patch by Stephen Crane <sjc@immunant.com>
Differential Revision: https://reviews.llvm.org/D49256
llvm-svn: 336964
PrologEpilogInserter and StackColoring depend on the StackProtector analysis
being alive from the point it is run until PEI, which requires that they are all
scheduled in the same FunctionPassManager. Inserting a (machine) ModulePass
between StackProtector and PEI results in these passes being in separate
FunctionPassManagers and the StackProtector is not available for PEI.
PEI and StackColoring don't use much information from the StackProtector pass,
so transfering the required information to MachineFrameInfo is cleaner than
keeping the StackProtector pass around. This commit moves the SSP layout
information to MFI instead of keeping it in the pass.
This patch set (D37580, D37581, D37582, D37583, D37584, D37585, D37586, D37587)
is a first draft of the pagerando implementation described in
http://lists.llvm.org/pipermail/llvm-dev/2017-June/113794.html.
Patch by Stephen Crane <sjc@immunant.com>
Differential Revision: https://reviews.llvm.org/D49256
llvm-svn: 336929
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
artifacts along with DCE
Legalization Artifacts are all those insts that are there to make the
type system happy. Currently, the target needs to say all combinations
of extends and truncs are legal and there's no way of verifying that
post legalization, we only have *truly* legal instructions. This patch
changes roughly the legalization algorithm to process all illegal insts
at one go, and then process all truncs/extends that were added to
satisfy the type constraints separately trying to combine trivial cases
until they converge. This has the added benefit that, the target
legalizerinfo can only say which truncs and extends are okay and the
artifact combiner would combine away other exts and truncs.
Updated legalization algorithm to roughly the following pseudo code.
WorkList Insts, Artifacts;
collect_all_insts_and_artifacts(Insts, Artifacts);
do {
for (Inst in Insts)
legalizeInstrStep(Inst, Insts, Artifacts);
for (Artifact in Artifacts)
tryCombineArtifact(Artifact, Insts, Artifacts);
} while(!Insts.empty());
Also, wrote a simple wrapper equivalent to SetVector, except for
erasing, it avoids moving all elements over by one and instead just
nulls them out.
llvm-svn: 318210
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
Summary: Make sure shifts are legal/specified by the legalizerinfo before creating it
Reviewers: qcolombet, dsanders, rovka, t.p.northover
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39264
llvm-svn: 316602
Prior to this patch we used to create SetVectors in temporaries that
were created and destroyed for each instruction. Now, instead we create
and destroyed them only once, but clear the content for each
instruction.
This speeds up the pass by ~25%.
NFC.
llvm-svn: 315756
Added a combiner which can clean up truncs/extends that are created in
order to make the types work during legalization.
Also moved the combineMerges to the LegalizeCombiner.
https://reviews.llvm.org/D36880
llvm-svn: 312158
It was trying to do too many things. The basic lumping together of values for
legalization purposes is now handled by G_MERGE_VALUES. More complex things
involving gaps and odd sizes are handled by G_INSERT sequences.
llvm-svn: 306120
Summary:
In some cases legalization ends up with not symmetric merge/unmerge nodes.
Transform it to merge/unmerge nodes.
Reviewers: t.p.northover, qcolombet, zvi
Reviewed By: t.p.northover
Subscribers: rovka, kristof.beyls, guyblank, llvm-commits
Differential Revision: https://reviews.llvm.org/D33626
llvm-svn: 305783
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
During legalization, targets can create Pseudo Instructions with
generic types. We shouldn't try to legalize them.
Reviewed by Quentin, dsanders
https://reviews.llvm.org/D32575
llvm-svn: 302199
This will become asan errors once the patch lands that poisons the
memory after free. The x86 change is a hack, but I don't see how to
solve this properly at the moment.
llvm-svn: 300867
The original instruction might get legalized and erased and expanded
into intermediate instructions and the intermediate instructions might
fail legalization. This end up in reporting GISelFailure on the erased
instruction.
Instead report GISelFailure on the intermediate instruction which failed
legalization.
Reviewed by: ab
llvm-svn: 299802
Summary:
We don’t actually use LegalizerInfo in Legalizer pass, it’s just passed
as an argument.
In order to check if an instruction is legal or not, we need to get LegalizerInfo
by calling `MI.getParent()->getParent()->getSubtarget().getLegalizerInfo()`.
Instead, make LegalizerInfo accessible in LegalizerHelper.
Reviewers: qcolombet, aditya_nandakumar, dsanders, ab, t.p.northover, kristof.beyls
Reviewed By: qcolombet
Subscribers: dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D30838
llvm-svn: 297491
These are simplified variants of the current G_SEQUENCE and G_EXTRACT, which
assume the individual parts will be contiguous, homogeneous, and occupy the
entirity of the larger register. This makes reasoning about them much easer
since you only have to look at the first register being merged and the result
to know what the instruction is doing.
I intend to gradually replace all uses of the more complicated sequence/extract
with these (or single-element insert/extracts), and then remove the older
variants. For now we start with legalization.
llvm-svn: 296921
Iterating on the use-list we're modifying doesn't work: after the first
iteration, the use-list iterator will point to a MachineOperand
referencing the new register. This caused us to skip the other uses to
replace.
Instead, use MRI.replaceRegWith(), which accounts for this behavior.
llvm-svn: 296551
Having more fine-grained information on the specific construct that
caused us to fallback is valuable for large-scale data collection.
We still have the fallback warning, that's also used for FastISel.
We still need to remove the fallback warning, and teach FastISel to also
emit remarks (it currently has a combination of the warning, stats, and
debug prints: the remarks could unify all three).
The abort-on-fallback path could also be better handled using remarks:
one could imagine a "-Rpass-error", analoguous to "-Werror", which would
promote missed/failed remarks to errors. It's not clear whether that
would be useful for other remarks though, so we're not there yet.
llvm-svn: 296013
The previous names were both misleading (the MachineLegalizer actually
contained the info tables) and inconsistent with the selector & translator (in
having a "Machine") prefix. This should make everything sensible again.
The only functional change is the name of a couple of command-line options.
llvm-svn: 284287
Aditya Nandakumar