This allows to write a test case for one of untested errors
in llvm/Object/ELF.h.
I did it in this patch to demonstrate.
Differential revision: https://reviews.llvm.org/D65394
llvm-svn: 367860
Summary:
This patch adds initial support for the SVE calling convention such that
SVE types can be passed as arguments and return values to/from a
subroutine.
The SVE AAPCS states [1]:
z0-z7 are used to pass scalable vector arguments to a subroutine,
and to return scalable vector results from a function. If a
subroutine takes arguments in scalable vector or predicate
registers, or if it is a function that returns results in such
registers, it must ensure that the entire contents of z8-z23 are
preserved across the call. In other cases it need only preserve the
low 64 bits of z8-z15, as described in §5.1.2.
p0-p3 are used to pass scalable predicate arguments to a subroutine
and to return scalable predicate results from a function. If a
subroutine takes arguments in scalable vector or predicate
registers, or if it is a function that returns results in these
registers, it must ensure that p4-p15 are preserved across the call.
In other cases it need not preserve any scalable predicate register
contents.
SVE predicate and data registers are passed indirectly (i.e. spilled to the
stack and pass the address) if they exceed the registers used for argument
passing defined by the PCS referenced above. Until SVE stack support is merged
we can't spill SVE registers to the stack, so currently an llvm_unreachable is
used where we will eventually handle this.
[1] https://static.docs.arm.com/100986/0000/100986_0000.pdf
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D65448
llvm-svn: 367859
This method is dead. It was introduced in D47989,
but now the logic from D63475 is used in llvm-readobj instead.
Also it has a problem: it returns the first matching section,
even if there are multiple sections with the same name.
Differential revision: https://reviews.llvm.org/D65393
llvm-svn: 367833
Adds a two way mapping between the scalable vector IR type and
corresponding SelectionDAG ValueTypes.
Reviewers: craig.topper, jeroen.dobbelaere, fhahn, rengolin, greened, rovka
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D47770
llvm-svn: 367832
Summary:
This is patch is part of a serie to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, jfb, jakehehrlich
Reviewed By: jfb
Subscribers: wuzish, jholewinski, arsenm, dschuff, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65514
llvm-svn: 367828
Add an explicit construction of the ArrayRef, gcc 5 and earlier don't
seem to select the ArrayRef constructor which takes a C array when the
construction is implicit.
Original commit message:
- Avoid a crash when IPRA calls ARMFrameLowering::determineCalleeSaves
with a null RegScavenger. Simply not updating the register scavenger
is fine because IPRA only cares about the SavedRegs vector, the acutal
code of the function has already been generated at this point.
- Add a new hook to TargetRegisterInfo to get the set of registers which
can be clobbered inside a call, even if the compiler can see both
sides, by linker-generated code.
Differential revision: https://reviews.llvm.org/D64908
llvm-svn: 367819
Summary:
This contains various fixes:
- Explicitly determine and return the next noreturn instruction.
- If an invoke calls a noreturn function which is not nounwind we
keep the unwind destination live. This also means we require an
invoke. Though we can still add the unreachable to the normal
destination block.
- Check if the return instructions are dead after we look for calls
to avoid triggering an optimistic fixpoint in the presence of
assumed liveness information.
- Make the interface work with "const" pointers.
- Some simplifications
While additional tests are included, full coverage is achieved only with
D59978.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65701
llvm-svn: 367791
When a fixpoint is indicated the change status is known due to the
fixpoint kind. This simplifies a common code pattern by making the
connection explicit.
llvm-svn: 367790
MachO/x86-64 UNSIGNED relocs are almost always 64-bit (length=3), but UNSIGNED
relocs of length=2 are allowed if the target resides in the low 32-bits. This
patch adds support for such relocations in JITLink (previously they would have
triggered an unsupported relocation error).
llvm-svn: 367764
This is an old commit that exposed a bug in the GISel importer, which caused
non-truncating stores to be selected for truncating store patterns. Now that's
been fixed in r367737 this can go back in.
llvm-svn: 367739
Modifying other AbstractAttributes to use Liveness AA and skip dead instructions.
Reviewers: jdoerfert, uenoku
Subscribers: hiraditya, llvm-commits
Differential revision: https://reviews.llvm.org/D65243
llvm-svn: 367725
Previously, debuginfo types are annotated to
IR builtin preserve_struct_access_index() and
preserve_union_access_index(), but not
preserve_array_access_index(). The debug info
is useful to identify the root type name which
later will be used for type comparison.
For user access without explicit type conversions,
the previous scheme works as we can ignore intermediate
compiler generated type conversions (e.g., from union types to
union members) and still generate correct access index string.
The issue comes with user explicit type conversions, e.g.,
converting an array to a structure like below:
struct t { int a; char b[40]; };
struct p { int c; int d; };
struct t *var = ...;
... __builtin_preserve_access_index(&(((struct p *)&(var->b[0]))->d)) ...
Although BPF backend can derive the type of &(var->b[0]),
explicit type annotation make checking more consistent
and less error prone.
Another benefit is for multiple dimension array handling.
For example,
struct p { int c; int d; } g[8][9][10];
... __builtin_preserve_access_index(&g[2][3][4].d) ...
It would be possible to calculate the number of "struct p"'s
before accessing its member "d" if array debug info is
available as it contains each dimension range.
This patch enables to annotate IR builtin preserve_array_access_index()
with proper debuginfo type. The unit test case and language reference
is updated as well.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D65664
llvm-svn: 367724
Summary:
As part of this, define DenseMapInfo for MCRegister (and Register while I'm at it)
Depends on D65599
Reviewers: arsenm
Subscribers: MatzeB, qcolombet, jvesely, wdng, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65605
llvm-svn: 367719
libObject does not apply the Exported flag to symbols in COFF object files,
which can lead to assertions when the symbol flags initially derived from
IR added to the JIT clash with the flags seen by the JIT linker. Both
RTDyldObjectLinkingLayer and ObjectLinkingLayer have a workaround for this:
they can be told to override the flags seen by the linker with the flags
attached to the materialization responsibility object that was passed down
to the linker. This patch modifies LLJIT's setup code to enable this override
by default on platforms where COFF is the default object format.
llvm-svn: 367712
Summary:
Register can cast to MCRegister and we may want to consider asserting
!isValid() || isPhysical() when expensive checks are on.
Depends on D65554
Reviewers: arsenm
Subscribers: wdng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65599
llvm-svn: 367711
Summary:
If the CallCounts change after an iteration of the DevirtSCCRepeatedPass, this is not reflected in the local CallCounts structure triggering the assertion checking the before/after sizes.
Since it is valid for the size to change and this only uses the CallCounts for the devirtualizing heuristic, keep a <Function*, CallCount> map instead, and make the devirtualizing decision using the counts for the functions that exist both before and after the pass.
Resolves PR42726.
Reviewers: chandlerc
Subscribers: mehdi_amini, jlebar, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65621
llvm-svn: 367703
ThreadSafeModule/ThreadSafeContext are used to manage lifetimes and locking
for LLVMContexts in ORCv2. Prior to this patch contexts were locked as soon
as an associated Module was emitted (to be compiled and linked), and were not
unlocked until the emit call returned. This could lead to deadlocks if
interdependent modules that shared contexts were compiled on different threads:
when, during emission of the first module, the dependence was discovered the
second module (which would provide the required symbol) could not be emitted as
the thread emitting the first module still held the lock.
This patch eliminates this possibility by moving to a finer-grained locking
scheme. Each client holds the module lock only while they are actively operating
on it. To make this finer grained locking simpler/safer to implement this patch
removes the explicit lock method, 'getContextLock', from ThreadSafeModule and
replaces it with a new method, 'withModuleDo', that implicitly locks the context,
calls a user-supplied function object to operate on the Module, then implicitly
unlocks the context before returning the result.
ThreadSafeModule TSM = getModule(...);
size_t NumFunctions = TSM.withModuleDo(
[](Module &M) { // <- context locked before entry to lambda.
return M.size();
});
Existing ORCv2 layers that operate on ThreadSafeModules are updated to use the
new method.
This method is used to introduce Module locking into each of the existing
layers.
llvm-svn: 367686
This patch adds support to the WholeProgramDevirt pass to perform
index-based WPD, which is invoked from ThinLTO during the thin link.
The ThinLTO backend (WPD import phase) behaves the same regardless of
whether the WPD decisions were made with the index-based or (the
existing) IR-based analysis.
Depends on D54815.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, arphaman, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D55153
llvm-svn: 367679
This optimisation isn't generally profitable for ARM, because we can
save/restore many registers in the prologue and epilogue using the PUSH
and POP instructions, but mostly use individual LDR/STR instructions for
other spills.
Differential revision: https://reviews.llvm.org/D64910
llvm-svn: 367670
- Avoid a crash when IPRA calls ARMFrameLowering::determineCalleeSaves
with a null RegScavenger. Simply not updating the register scavenger
is fine because IPRA only cares about the SavedRegs vector, the acutal
code of the function has already been generated at this point.
- Add a new hook to TargetRegisterInfo to get the set of registers which
can be clobbered inside a call, even if the compiler can see both
sides, by linker-generated code.
Differential revision: https://reviews.llvm.org/D64908
llvm-svn: 367669
This patch adds an ability to disable profile based peeling
causing the peeling of all iterations and as a result prohibits
further unroll/peeling attempts on that loop.
The motivation to get an ability to separate peeling usage in
pipeline where in the first part we peel only separate iterations if needed
and later in pipeline we apply the full peeling which will prohibit further peeling.
Reviewers: reames, fhahn
Reviewed By: reames
Subscribers: hiraditya, zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D64983
llvm-svn: 367668
The unit tests in BasicAliasAnalysisTest use the alias analysis API
directly and do not call setAAResults to initalize AAR. This gives a
valgrind error "Conditional Jump depends on unitialized variable".
On most buildbots the variable is nullptr, but in some cases it can be
non nullptr leading to seemingly random failures.
These tests were disabled in r366986. With the initialization they can be
enabled again.
Fixes PR42719
Differential Revision: https://reviews.llvm.org/D65568
llvm-svn: 367662
1. raw_ostream supports ANSI colors so that you can write messages to
the termina with colors. Previously, in order to change and reset
color, you had to call `changeColor` and `resetColor` functions,
respectively.
So, if you print out "error: " in red, for example, you had to do
something like this:
OS.changeColor(raw_ostream::RED);
OS << "error: ";
OS.resetColor();
With this patch, you can write the same code as follows:
OS << raw_ostream::RED << "error: " << raw_ostream::RESET;
2. Add a boolean flag to raw_ostream so that you can disable colored
output. If you disable colors, changeColor, operator<<(Color),
resetColor and other color-related functions have no effect.
Most LLVM tools automatically prints out messages using colors, and
you can disable it by passing a flag such as `--disable-colors`.
This new flag makes it easy to write code that works that way.
Differential Revision: https://reviews.llvm.org/D65564
llvm-svn: 367649
Current peeling cost model can decide to peel off not all iterations
but only some of them to eliminate conditions on phi. At the same time
if any peeling happens the door for further unroll/peel optimizations on that
loop closes because the part of the code thinks that if peeling happened
it is profile based peeling and all iterations are peeled off.
To resolve this inconsistency the patch provides the flag which states whether
the full peeling basing on profile is enabled or not and peeling cost model
is able to modify this field like it does not PeelCount.
In a separate patch I will introduce an option to allow/disallow peeling basing
on profile.
To avoid infinite loop peeling the patch tracks the total number of peeled iteration
through llvm.loop.peeled.count loop metadata.
Reviewers: reames, fhahn
Reviewed By: reames
Subscribers: hiraditya, zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D64972
llvm-svn: 367647
Summary:
The MC layer doesn't expect to deal with vregs but
TargetRegisterClass::contains() forwards into MCRegisterClass::contains()
and this can cause vregs to turn up in the MC layer APIs. Add guards
against this to prevent this becoming a problem as we replace unsigned
with a new MCRegister object for improved type safety.
Reviewers: arsenm
Subscribers: wdng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65554
llvm-svn: 367636
Add PGO support at -O0 in the experimental new pass manager to sync the
behavior of the legacy pass manager.
Also change the test of gcc-flag-compatibility.c for more complete test:
(1) change the match string to "profc" and "profd" to ensure the
instrumentation is happening.
(2) add IR format proftext so that PGO use compilation is tested.
Differential Revision: https://reviews.llvm.org/D64029
llvm-svn: 367628
Summary:
The namespacing in Register is currently slightly wrong as there is a
(rarely used) stack slot namespace too. The namespacing doesn't use
anything from the Target so we can move the definition from
TargetRegisterInfo to Register to keep it in one place
Note: To keep the patch reasonably sized for review I've left stub
functions in the original TargetRegisterInfo. We should update all the uses
instead
Reviewers: arsenm, bogner, aditya_nandakumar, volkan
Subscribers: wdng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65553
llvm-svn: 367614
AMDGPU sometimes has legal s16 and <2 x s16> operations, but all
registers are really 32-bit. An unmerge destination really should ben
widened to a 32-bit register. If widening a scalarizing vector with a
target size that matches the vector size, bitcast to integer and
extract the relevant bits with shifts.
I'm not sure if this is the right place for this. This could arguably
be part of widenScalar for the result. I also have a growing feeling
that we're missing a bitcast legalize action.
llvm-svn: 367604
If a type is larger than a legal type and needs to be split, we would previously allow the multiply to be decomposed even if the split multiply is legal. Since the shift + add/sub code would also need to be split, its not any better to decompose it.
This patch figures out what type the mul will eventually be legalized to and then uses that type for the query. I tried just returning false illegal types and letting them get handled after type legalization, but then we can't recognize and i64 constant splat on 32-bit targets since will be destroyed by type legalization. We could special case vectors of i64 to avoid that...
Differential Revision: https://reviews.llvm.org/D65533
llvm-svn: 367601
This allows folding of the scalar epilogue loop (the tail) into the main
vectorised loop body when the loop is annotated with a "vector predicate"
metadata hint. To fold the tail, instructions need to be predicated (masked),
enabling/disabling lanes for the remainder iterations.
Differential Revision: https://reviews.llvm.org/D65197
llvm-svn: 367592
Adds a method which, when called with function.getArg(i), returns an
Argument* to the i'th argument.
Patch by Henry Wildermuth
Differential Revision: https://reviews.llvm.org/D64925
llvm-svn: 367576
Summary:
While there is always a `Value::replaceAllUsesWith()`,
sometimes the replacement needs to be conditional.
I have only cleaned a few cases where `replaceUsesWithIf()`
could be used, to both add test coverage,
and show that it is actually useful.
Reviewers: jdoerfert, spatel, RKSimon, craig.topper
Reviewed By: jdoerfert
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, aheejin, george.burgess.iv, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65528
llvm-svn: 367548
Summary:
Sometimes we need to swap true-val and false-val of a `SelectInst`.
Having a function for that is nicer than hand-writing it each time.
Reviewers: spatel, RKSimon, craig.topper, jdoerfert
Reviewed By: jdoerfert
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65520
llvm-svn: 367547
The current minimum GCC version is 4.8 (soon to be 5.1), we there don't need to check for older versions. While I'm around Compiler.h, also update some of the doxygen comment.
llvm-svn: 367508
Start migrating to a form that will be compatible with the global isel
emitter. Also should fix some overly lax checks on the memory type,
which allowed mis-selecting some illegal atomics.
llvm-svn: 367506
Summary:
This will make it possible to improve IPRA by taking into account
register usage in indirect calls.
NFC yet; this is just laying the groundwork to start building
up patches to take advantage of the information for improved register
allocation.
Reviewers: aditya_nandakumar, volkan, qcolombet, arsenm, rovka, aemerson, paquette
Subscribers: sdardis, wdng, javed.absar, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65488
llvm-svn: 367476
This makes the field wider than MachineOperand::SubReg_TargetFlags so that
we don't end up silently truncating any higher bits. We should still catch
any bits truncated from the MachineOperand field as a consequence of the
assertion in MachineOperand::setTargetFlags().
Differential Revision: https://reviews.llvm.org/D65465
llvm-svn: 367474
Added AddOverflow, SubOverflow and MulOverflow to compute truncated results and return a flag indicating whether overflow occured.
Differential Revision: https://reviews.llvm.org/D65494
llvm-svn: 367470
Summary:
Verify that the incoming defs into phis are the last defs from the
respective incoming blocks.
When moving blocks, insertDef must RenameUses. Adding this verification
makes GVNHoist tests fail that uncovered this issue.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63147
llvm-svn: 367451
The ELF for the Arm 64-bit Architecture document originally specified
R_AARCH64_TLS_DTPREL64 = 0x404
R_AARCH64_TLS_DTPMOD64 = 0x405
LLVM correctly followed the document. Unfortunately in binutils these
two codes were reversed:
R_AARCH64_TLS_DTPMOD64 = 0x404
R_AARCH64_TLS_DTPREL64 = 0x405
Given that binaries had shipped this change has become the defacto standard
interpretation of these relocation codes for any toolchain that wanted to
remain compatible with GNU.
To recognize this the latest version of the ABI document has renamed
the relocations to R_AARCH64_TLS_IMPDEF1 and R_AARCH64_TLS_IMPDEF2
permitting a toolchain to choose between the two relocation types, and
recommending that toolchains follow the GNU interpretation for maximum
compatibility.
Given that upstream llvm has never implemented the standard TLS model for
AArch64 so we have no binary legacy, synchronize with GCC so that we don't
create incompatible objects in the future. So far the only visible change
is in llvm-readobj as it can decode these relocations. Tthis change will
mean that llvm-readobj decodes the same way as GNU readelf.
fixes PR40507
llvm-svn: 367437
Summary:
While `-div-rem-pairs` pass can decompose rem in div+rem pair when div-rem pair
is unsupported by target, nothing performs the opposite fold.
We can't do that in InstCombine or DAGCombine since neither of those has access to TTI.
So it makes most sense to teach `-div-rem-pairs` about it.
If we matched rem in expanded form, we know we will be able to place div-rem pair
next to each other so we won't regress the situation.
Also, we shouldn't decompose rem if we matched already-decomposed form.
This is surprisingly straight-forward otherwise.
The original patch was committed in rL367288 but was reverted in rL367289
because it exposed pre-existing RAUW issues in internal data structures
of the pass; those now have been addressed in a previous patch.
https://bugs.llvm.org/show_bug.cgi?id=42673
Reviewers: spatel, RKSimon, efriedma, ZaMaZaN4iK, bogner
Reviewed By: bogner
Subscribers: bogner, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65298
llvm-svn: 367419
Summary:
`DivRemPairs` internally creates two maps:
* {sign, divident, divisor} -> div instruction
* {sign, divident, divisor} -> rem instruction
Then it iterates over rem map, and looks if there is an entry
in div map with the same key. Then depending on some internal logic
it may RAUW rem instruction with something else.
But if that rem instruction is an input to other div/rem,
then it was used as a key in these maps, so the old value (used in key)
is now dandling, because RAUW didn't update those maps.
And we can't even RAUW map keys in general, there's `ValueMap`,
but we don't have a single `Value` as key...
The bug was discovered via D65298, and the test there exists.
Now, i'm not sure how to expose this issue in trunk.
The bug is clearly there if i change the map keys to be `AssertingVH`/`PoisoningVH`,
but i guess this didn't miscompiled anything thus far?
I really don't think this is benin without that patch.
The fix is actually rather straight-forward - instead of trying to somehow
shoe-horn `ValueMap` here (doesn't fit, key isn't just `Value`), or writing a new
`ValueMap` with key being a struct of `Value`s, we can just have an intermediate
data structure - a vector, each entry containing matching `Div, Rem` pair,
and pre-filling it before doing any modifications.
This way we won't need to query map after doing RAUW, so no bug is possible.
Reviewers: spatel, bogner, RKSimon, craig.topper
Reviewed By: spatel
Subscribers: hiraditya, hans, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65451
llvm-svn: 367417
Summary:
This patch introduces a type to straighten LLVM's alignment management.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
The next step is to use this type throughout LLVM
Reviewers: jfb, jakehehrlich
Subscribers: mgorny, mgrang, dexonsmith, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64790
llvm-svn: 367393
This error was never tested. In this patch I improved
the error message, added the test case and also simplified
the code that processes a similar error right below.
Differential revision: https://reviews.llvm.org/D65396
llvm-svn: 367391
Summary: The minimum compilers support all have alignas, and we don't use LLVM_ALIGNAS anywhere anymore. This also removes an MSVC diagnostic which, according to the comment above, isn't relevant anymore.
Reviewers: rnk
Subscribers: mgorny, jkorous, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65458
llvm-svn: 367383
AMDGPU uses some custom code predicates for testing alignments.
I'm still having trouble comprehending the behavior of predicate bits
in the PatFrag hierarchy. Any attempt to abstract these properties
unexpectdly fails to apply them.
llvm-svn: 367373
Add a new serializer, using a binary format based on the LLVM bitstream
format.
This format provides a way to serialize the remarks in two modes:
1) Separate mode: the metadata is separate from the remark entries.
2) Standalone mode: the metadata and the remark entries are in the same
file.
The format contains:
* a meta block: container version, container type, string table,
external file path, remark version
* a remark block: type, remark name, pass name, function name, debug
file, debug line, debug column, hotness, arguments (key, value, debug
file, debug line, debug column)
A string table is required for this format, which will be dumped in the
meta block to be consumed before parsing the remark blocks.
On clang itself, we noticed a size reduction of 13.4x compared to YAML,
and a compile-time reduction of between 1.7% and 3.5% on CTMark.
Differential Revision: https://reviews.llvm.org/D63466
Original llvm-svn: 367364
Revert llvm-svn: 367370
llvm-svn: 367372
Add a new serializer, using a binary format based on the LLVM bitstream
format.
This format provides a way to serialize the remarks in two modes:
1) Separate mode: the metadata is separate from the remark entries.
2) Standalone mode: the metadata and the remark entries are in the same
file.
The format contains:
* a meta block: container version, container type, string table,
external file path, remark version
* a remark block: type, remark name, pass name, function name, debug
file, debug line, debug column, hotness, arguments (key, value, debug
file, debug line, debug column)
A string table is required for this format, which will be dumped in the
meta block to be consumed before parsing the remark blocks.
On clang itself, we noticed a size reduction of 13.4x compared to YAML,
and a compile-time reduction of between 1.7% and 3.5% on CTMark.
Differential Revision: https://reviews.llvm.org/D63466
llvm-svn: 367364
Summary:
LoopRotate may simplify instructions, leading to the new instructions not having memory accesses created for them.
Allow this behavior, by allowing the new access to be null when the template is null, and looking upwards for the proper defined access when dealing with simplified instructions.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65338
llvm-svn: 367352
Summary:
In D37215, AssumeLikeInstruction are regarded as `willreturn`. In this patch, annotation is added to those which don't have `willreturn` now(`sideeffect, object_size, experimental_widenable_condition`).
Reviewers: jdoerfert, nikic, sstefan1
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65455
llvm-svn: 367342
LLVM_ALIGNAS was removed from this class in http://llvm.org/r338099 but the comment was left there. The class is still sommewhat relevant despite the comment, let's keep it there with its one use.
llvm-svn: 367336
LoopInfo can be easily preserved by passing it to the functions that
modify the CFG (SplitCriticalEdge and MergeBlockIntoPredecessor.
SplitCriticalEdge also preserves LoopSimplify and LCSSA form when when passing in
LoopInfo. The test case shows that we preserve LoopSimplify and
LoopInfo. Adding addPreservedID(LCSSAID) did not preserve LCSSA for some
reason.
Also I am not sure if it is possible to preserve those in the new pass
manager, as they aren't analysis passes.
Reviewers: reames, hfinkel, davide, jdoerfert
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D65137
llvm-svn: 367332
The default mode is separate, where the metadata is serialized
separately from the remarks.
Another mode is the standalone mode, where the metadata is serialized
before the remarks, on the same stream.
llvm-svn: 367328
Addresses number of comment made on D64652 after commiting:
- Reorders function decls in the TargetLoweringObjectFileXCOFF class.
- Fix comment in MCSectionXCOFF to include description of external reference
csects.
- Convert several llvm_unreachables to report_fatal_error
- Convert several dyn_casts to casts as they are expected not to fail.
- Avoid copying DataLayout object.
llvm-svn: 367324
Summary:
I have stumbled into this by accident while preparing to extend backend `x s% C ==/!= 0` handling.
While we did happen to handle this fold in most of the cases,
the folding is indirect - we fold `x u% y` to `x & (y-1)` (iff `y` is power-of-two),
or first turn `x s% -y` to `x u% y`; that does handle most of the cases.
But we can't turn `x s% INT_MIN` to `x u% -INT_MIN`,
and thus we end up being stuck with `(x s% INT_MIN) == 0`.
There is no such restriction for the more general fold:
https://rise4fun.com/Alive/IIeS
To be noted, the fold does not enforce that `y` is a constant,
so it may indeed increase instruction count.
This is consistent with what `x u% y`->`x & (y-1)` already does.
I think it makes sense, it's at most one (simple) extra instruction,
while `rem`ainder is really much more un-simple (and likely **very** costly).
Reviewers: spatel, RKSimon, nikic, xbolva00, craig.topper
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65046
llvm-svn: 367322
Summary:
Patch removes SVE and SVE2 features from ARMTargetParser as these
features are not supported on ARM.
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D65385
llvm-svn: 367292
test-suite/MultiSource/Benchmarks/DOE-ProxyApps-C/miniGMG broke:
Only PHI nodes may reference their own value!
%sub33 = srem i32 %sub33, %ranks_in_i
This reverts commit r367288.
llvm-svn: 367289
Summary:
While `-div-rem-pairs` pass can decompose rem in div+rem pair when div-rem pair
is unsupported by target, nothing performs the opposite fold.
We can't do that in InstCombine or DAGCombine since neither of those has access to TTI.
So it makes most sense to teach `-div-rem-pairs` about it.
If we matched rem in expanded form, we know we will be able to place div-rem pair
next to each other so we won't regress the situation.
Also, we shouldn't decompose rem if we matched already-decomposed form.
This is surprisingly straight-forward otherwise.
https://bugs.llvm.org/show_bug.cgi?id=42673
Reviewers: spatel, RKSimon, efriedma, ZaMaZaN4iK, bogner
Reviewed By: bogner
Subscribers: bogner, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65298
llvm-svn: 367288
I removed all uses of AlignedCharArray since the minimum MSVC version can handle
alignas on char arrays correctly. We can therefore remove AlignedCharArray.
This patch also updates AlignedCharArrayUnion to use C++11.
llvm-svn: 367282
This patch adds a VFS that can be overlaid on top of another VFS
to record file system accesses using the FileCollector.
This can help to gather files that are needed for reproducers.
Differential Revision: https://reviews.llvm.org/D65411
llvm-svn: 367278
As discussed in D65249, don't use AlignedCharArray or std::aligned_storage. Just use alignas(X) char Buf[Size];. This will allow me to remove AlignedCharArray entirely, and works on the current minimum version of Visual Studio.
llvm-svn: 367277
Put the list of fixed metadata kinds in one place.
Testing: check-llvm with+without LLVM_ENABLE_MODULES=On
Differential Revision: https://reviews.llvm.org/D64437
llvm-svn: 367257
Summary:
The existing isDivergent(Value) methods query whether a value is
divergent at its definition. However even if a value is uniform at its
definition, a use of it in another basic block can be divergent because
of divergent control flow between the def and the use.
This patch adds new isDivergent(Use) methods to DivergenceAnalysis,
LegacyDivergenceAnalysis and GPUDivergenceAnalysis.
This might allow D63953 or other similar workarounds to be removed.
Reviewers: alex-t, nhaehnle, arsenm, rtaylor, rampitec, simoll, jingyue
Reviewed By: nhaehnle
Subscribers: jfb, jvesely, wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65141
llvm-svn: 367218
Summary:
In D62801, new function attribute `willreturn` was introduced. In short, a function with `willreturn` is guaranteed to come back to the call site(more precise definition is in LangRef).
In this patch, willreturn is annotated for LLVM intrinsics.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: jvesely, nhaehnle, sstefan1, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64904
llvm-svn: 367184
This adds support to the yaml remark parser to be able to parse remarks
directly from the metadata.
This supports parsing separate metadata and following the external file
with the associated metadata, and also a standalone file containing
metadata + remarks all together.
Original llvm-svn: 367148
Revert llvm-svn: 367151
This has a fix for gcc builds.
llvm-svn: 367155
This adds support to the yaml remark parser to be able to parse remarks
directly from the metadata.
This supports parsing separate metadata and following the external file
with the associated metadata, and also a standalone file containing
metadata + remarks all together.
llvm-svn: 367148
Summary:
The bitperm feature flag is now prefixed with SVE2, as it is for all other SVE2
extensions
Patch by Maciej Gabka.
Reviewers: sdesmalen, rovka, chill, SjoerdMeijer, rengolin
Reviewed By: SjoerdMeijer, rengolin
Differential Revision: https://reviews.llvm.org/D65327
llvm-svn: 367124
Add llvm.amdgcn.softwqm intrinsic which behaves like llvm.amdgcn.wqm
only if there is other WQM computation in the shader.
Reviewers: nhaehnle, tpr
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64935
llvm-svn: 367097
To avoid duplicates in loop metadata, if the string to add is
already there, just update the value.
Reviewers: reames, Ashutosh
Reviewed By: reames
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D65265
llvm-svn: 367087
This allows every serializer format to implement metaSerializer() and
return the corresponding meta serializer.
Original llvm-svn: 366946
Reverted llvm-svn: 367004
This fixes the unit tests on Windows bots.
llvm-svn: 367078
changes were made to the patch since then.
--------
[NewPM] Port Sancov
This patch contains a port of SanitizerCoverage to the new pass manager. This one's a bit hefty.
Changes:
- Split SanitizerCoverageModule into 2 SanitizerCoverage for passing over
functions and ModuleSanitizerCoverage for passing over modules.
- ModuleSanitizerCoverage exists for adding 2 module level calls to initialization
functions but only if there's a function that was instrumented by sancov.
- Added legacy and new PM wrapper classes that own instances of the 2 new classes.
- Update llvm tests and add clang tests.
llvm-svn: 367053
as DDG and PDG.
Summary:
This is an implementation of a directed graph base class with explicit
representation of both nodes and edges. This implementation makes the
edges explicit because we expect to assign various attributes (such as
dependence type, distribution interference weight, etc) to the edges in
the derived classes such as DDG and DIG. The DirectedGraph consists of a
list of DGNode's. Each node consists of a (possibly empty) list of
outgoing edges to other nodes in the graph. A DGEdge contains a
reference to a single target node. Note that nodes do not know about
their incoming edges so the DirectedGraph class provides a function to
find all incoming edges to a given node.
This is the first patch in a series of patches that we are planning to
contribute upstream in order to implement Data Dependence Graph and
Program Dependence Graph.
More information about the proposed design can be found here:
https://ibm.ent.box.com/v/directed-graph-and-ddg
Authored By: bmahjour
Reviewer: Meinersbur, myhsum hfinkel, fhahn, jdoerfert, kbarton
Reviewed By: Meinersbur
Subscribers: mgorny, wuzish, jsji, lebedev.ri, dexonsmith, kristina,
llvm-commits, Whitney, etiotto
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D64088
llvm-svn: 367043
Summary:
This is the first patch for the loop guard. We introduced
getLoopGuardBranch() and isGuarded().
This currently only works on simplified loop, as it requires a preheader
and a latch to identify the guard.
It will work on loops of the form:
/// GuardBB:
/// br cond1, Preheader, ExitSucc <== GuardBranch
/// Preheader:
/// br Header
/// Header:
/// ...
/// br Latch
/// Latch:
/// br cond2, Header, ExitBlock
/// ExitBlock:
/// br ExitSucc
/// ExitSucc:
Prior discussions leading upto the decision to introduce the loop guard
API: http://lists.llvm.org/pipermail/llvm-dev/2019-May/132607.html
Reviewer: reames, kbarton, hfinkel, jdoerfert, Meinersbur, dmgreen
Reviewed By: reames
Subscribers: wuzish, hiraditya, jsji, llvm-commits, bmahjour, etiotto
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63885
llvm-svn: 367033
We do not need the SmallPtrSet to avoid adding duplicates to
OpsToRename, because we already keep a ValueInfo mapping. If we see an
op for the first time, Infos will be empty and we can also add it to
OpsToRename.
We process operands by visiting BBs depth-first and then iterate over
all instructions & users, so the order should be deterministic.
Therefore we can skip one round of sorting, which we purely needed for
guaranteeing a deterministic order when iterating over the SmallPtrSet.
Reviewers: efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D64816
llvm-svn: 367028
Summary:
It is a good idea to do as much matching inside of `match()` as possible.
If some checking is done afterwards, and we don't fold because of it,
chances are we may have missed some commutative pattern.
Reviewers: spatel, craig.topper, RKSimon
Reviewed By: spatel, RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64038
llvm-svn: 367017
Summary:
I don't think it already exists? I don't see it at least.
It is important to have it because else we'll do some checks after `match()`,
and that may result in missed folds in commutative nodes.
Reviewers: spatel, craig.topper, RKSimon, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64037
llvm-svn: 367016
Summary:
Add a new method which tries to compute the target address referenced by an operand.
This patch supports x86_64 RIP-relative addressing for now.
It is necessary to print referenced symbol names in llvm-objdump.
Reviewers: andreadb, MaskRay, grosbach, jgalenson, craig.topper
Reviewed By: MaskRay, craig.topper
Subscribers: bcain, rupprecht, jhenderson, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63847
llvm-svn: 366987
Change MAXSECTALIGN to a public MaxSectionAlignment in MachOUniversal.
Will be used in a follow-up.
Patch by Anusha Basana <anusha.basana@gmail.com>
Differential Revision: https://reviews.llvm.org/D65117
llvm-svn: 366969
This patch changes the coding style of the FileCollector from the LLDB
to the LLVM coding style. Alex recently lifted it into LLVM and I
volunteered to do the conversion.
llvm-svn: 366966
I've noticed a lot of confusion around this area recently with key terms being misused in a number of threads. To help reign that in, let's go ahead and document the current terminology and meaning thereof.
My hope is to grow this over time into a broader discussion of canonical loop forms - yes, there are more than one ... many more than one - but for the moment, simply having the key terminology is a good stopping place.
Note: I am landing this *without* an LGTM. All feedback so far has been positive, and trying to apply all of the suggested changes/extensions would cause the review to never end. Instead, I decided to land it with the obvious fixes made based on reviewer comments, then iterate from there.
Differential Revision: https://reviews.llvm.org/D65164
llvm-svn: 366960
The file collector class is useful for creating reproducers,
not just for LLDB, but for other tools as well in LLVM/Clang.
Differential Revision: https://reviews.llvm.org/D65237
llvm-svn: 366956
Summary:
This was originally reported in D62818.
https://rise4fun.com/Alive/oPH
InstCombine does the opposite fold, in hope that `C l>>/<< Y` expression
will be hoisted out of a loop if `Y` is invariant and `X` is not.
But as it is seen from the diffs here, if it didn't get hoisted,
the produced assembly is almost universally worse.
Much like with my recent "hoist add/sub by/from const" patches,
we should get almost universal win if we hoist constant,
there is almost always an "and/test by imm" instruction,
but "shift of imm" not so much, so we may avoid having to
materialize the immediate, and thus need one less register.
And since we now shift not by constant, but by something else,
the live-range of that something else may reduce.
Special care needs to be applied not to disturb x86 `BT` / hexagon `tstbit`
instruction pattern. And to not get into endless combine loop.
Reviewers: RKSimon, efriedma, t.p.northover, craig.topper, spatel, arsenm
Reviewed By: spatel
Subscribers: hiraditya, MaskRay, wuzish, xbolva00, nikic, nemanjai, jvesely, wdng, nhaehnle, javed.absar, tpr, kristof.beyls, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62871
llvm-svn: 366955
For aliases, any expression that lowers at the MC level to global_object or
global_object+constant is valid at the object file level. getBaseObject()
should return a result if the aliasee ends up being of that form even if
the IR used to produce it is somewhat unconventional.
Note that this is different from what stripInBoundsOffsets() and that family
of functions is doing. Those functions are concerned about semantic properties
of IR, whereas here we only care about the lowering result.
Therefore reimplement getBaseObject() in a way that matches the lowering
result. This fixes a crash when producing a summary for aliases such as
that in the included test case.
Differential Revision: https://reviews.llvm.org/D65115
llvm-svn: 366952
This introduces a new family of combiner helper routines that re-use the
target specific cost model from SelectionDAG, and generate inline implementations
of the memcpy family of intrinsics.
The combines are only enabled at optimization levels higher than -O0, and give
very substantial performance improvements.
Differential Revision: https://reviews.llvm.org/D65167
llvm-svn: 366951
This patch adds support for recognizing cases where a larger vector type is being used to reduce just the elements in the lower subvector:
e.g. <8 x i32> reduction pattern in a <16 x i32> vector:
<4,5,6,7,u,u,u,u,u,u,u,u,u,u,u,u>
<2,3,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
<1,u,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
matchBinOpReduction returns the lower extracted subvector in such cases, assuming isExtractSubvectorCheap accepts the extraction.
I've only enabled it for X86 reduction sums so far. I intend to enable it for the bitop/minmax cases in future patches, and eventually I think its worth turning it on all the time. This is mainly just a case of ensuring calls to matchBinOpReduction don't make assumptions on the vector width based on the original vector extraction.
Fixes the x86 partial reduction sum cases in PR33758 and PR42023.
Differential Revision: https://reviews.llvm.org/D65047
llvm-svn: 366933
Summary:
Move `-ftime-trace-granularity` option to frontend options. Without patch
this option is showed up in the help for any tool that links libSupport.
Reviewers: sammccall
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65202
llvm-svn: 366911
Summary:
SimplifyFPBinOp is a variant of SimplifyBinOp that lets you specify
fast math flags, but the name is misleading because both functions
can simplify both FP and non-FP ops. Instead, overload SimplifyBinOp
so that you can optionally specify fast math flags.
Likewise for SimplifyFPUnOp.
Reviewers: spatel
Reviewed By: spatel
Subscribers: xbolva00, cameron.mcinally, eraman, hiraditya, haicheng, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64902
llvm-svn: 366902
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
> llvm-svn: 366860
llvm-svn: 366897
With a fix of the issue found by UBSan.
Original commit message:
This eliminates a one error untested and
also introduces a error for one more possible case
which lead to crash previously.
Differential revision: https://reviews.llvm.org/D64987
llvm-svn: 366886
Copying them is expensive. This allows the tables to be moved around at
lower cost, and allows a remarks::StringTable to be constructed from
a remarks::ParsedStringTable.
llvm-svn: 366864
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
llvm-svn: 366860
This exposes better support to use a string table with a format through
an actual new remark::Format, called yaml-strtab.
This can now be used with -fsave-optimization-record=yaml-strtab.
llvm-svn: 366849
llvm-ar outputs a strange error message when handling archives with
members larger than 4GB due to not checking file size when passing the
value as an unsigned 32 bit integer. This overflow issue caused
malformed archives to be created.:
https://bugs.llvm.org/show_bug.cgi?id=38058
This change allows for members above 4GB and will error in a case that
is over the formats size limit, a 10 digit decimal integer.
Differential Revision: https://reviews.llvm.org/D65093
llvm-svn: 366813
This patch introduces the DAG version of SimplifyMultipleUseDemandedBits, which attempts to peek through ops (mainly and/or/xor so far) that don't contribute to the demandedbits/elts of a node - which means we can do this even in cases where we have multiple uses of an op, which normally requires us to demanded all bits/elts. The intention is to remove a similar instruction - SelectionDAG::GetDemandedBits - once SimplifyMultipleUseDemandedBits has matured.
The InstCombine version of SimplifyMultipleUseDemandedBits can constant fold which I haven't added here yet, and so far I've only wired this up to some basic binops (and/or/xor/add/sub/mul) to demonstrate its use.
We do see a couple of regressions that need to be addressed:
AMDGPU unsigned dot product codegen retains an AND mask (for ZERO_EXTEND) that it previously removed (but otherwise the dotproduct codegen is a lot better).
X86/AVX2 has poor handling of vector ANY_EXTEND/ANY_EXTEND_VECTOR_INREG - it prematurely gets converted to ZERO_EXTEND_VECTOR_INREG.
The code owners have confirmed its ok for these cases to fixed up in future patches.
Differential Revision: https://reviews.llvm.org/D63281
llvm-svn: 366799
This eliminates a one error untested and
also introduces a error for one more possible case
which lead to crash previously.
Differential revision: https://reviews.llvm.org/D64987
llvm-svn: 366796
Summary:
Deduce dereferenceable attribute in Attributor.
These will be added in a later patch.
* dereferenceable(_or_null)_globally (D61652)
* Deduction based on load instruction (similar to D64258)
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64876
llvm-svn: 366788
Summary: Adds a binding to the internalize pass that allows the caller to pass a function pointer that acts as the visibility-preservation predicate. Previously, one could only pass an unsigned value (not LLVMBool?) that directed the pass to consider "main" or not.
Reviewers: whitequark, deadalnix, harlanhaskins
Reviewed By: whitequark, harlanhaskins
Subscribers: kren1, hiraditya, llvm-commits, harlanhaskins
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62456
llvm-svn: 366777
[Attributor] Liveness analysis.
Liveness analysis abstract attribute used to indicate which BasicBlocks are dead and can therefore be ignored.
Right now we are only looking at noreturn calls.
Reviewers: jdoerfert, uenoku
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D64162
llvm-svn: 366769
[Attributor] Liveness analysis.
Liveness analysis abstract attribute used to indicate which BasicBlocks are dead and can therefore be ignored.
Right now we are only looking at noreturn calls.
Reviewers: jdoerfert, uenoku
Subscribers: hiraditya, llvm-commits
Differential revision: https://reviews.llvm.org/D64162
llvm-svn: 366753
Liveness analysis abstract attribute used to indicate which BasicBlocks are dead and can therefore be ignored.
Right now we are only looking at noreturn calls.
Reviewers: jdoerfert, uenoku
Subscribers: hiraditya, llvm-commits
Differential revision: https://reviews.llvm.org/D64162
llvm-svn: 366736
Porting function return value attribute noalias to attributor.
This will be followed with a patch for callsite and function argumets.
Reviewers: jdoerfert
Subscribers: lebedev.ri, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D63067
llvm-svn: 366728
Stubs out a TargetLoweringObjectFileXCOFF class, implementing only
SelectSectionForGlobal for common symbols. Also adds an override of
EmitGlobalVariable in PPCAIXAsmPrinter which adds a number of defensive errors
and adds support for emitting common globals.
llvm-svn: 366727
Instead of having the special list of implicit sections,
that are mixed with the sections read from YAML on late
stages, I just create the placeholders and add them to
the main sections list early.
That allows to significantly simplify the code.
Differential revision: https://reviews.llvm.org/D64999
llvm-svn: 366677
We were creating a bitmask from a shift of unsigned instead of uintptr_t, meaning we couldn't create masks for indices above 31.
Noticed due to a MSVC analyzer warning.
llvm-svn: 366657
Summary:
Add immutable WASM global `__tls_align` which stores the alignment
requirements of the TLS segment.
Add `__builtin_wasm_tls_align()` intrinsic to get this alignment in Clang.
The expected usage has now changed to:
__wasm_init_tls(memalign(__builtin_wasm_tls_align(),
__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, sbc100, sunfish, alexcrichton
Reviewed By: tlively
Subscribers: dschuff, jgravelle-google, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65028
llvm-svn: 366624
This change reverts most of the previous register name generation.
The real problem is that RegisterTuple does not generate asm names.
Added optional operand to RegisterTuple. This way we can simplify
register name access and dramatically reduce the size of static
tables for the backend.
Differential Revision: https://reviews.llvm.org/D64967
llvm-svn: 366598
Summary: include proper header prior to use of uint8_t typedef
and std::string.
Subscribers: llvm-commits
Reviewers: cherry
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64937
llvm-svn: 366572
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
llvm-svn: 366524
I plan on adding memcpy optimizations in the GlobalISel pipeline, but we can't
do that unless we delay lowering to actual function calls. This patch changes
the translator to generate G_INTRINSIC_W_SIDE_EFFECTS for these functions, and
then have each target specify that using the new custom legalizer for intrinsics
hook that they want it expanded it a libcall.
Differential Revision: https://reviews.llvm.org/D64895
llvm-svn: 366516
The IRBuilder doesn't know that FPTrunc and FPExt have constrained
equivalents. Add the support by building on the strict FP mode now
present in the IRBuilder.
Reviewed by: John McCall
Approved by: John McCall
Differential Revision: https://reviews.llvm.org/D64934
llvm-svn: 366477
Summary:
Add `__builtin_wasm_tls_base` so that LeakSanitizer can find the thread-local
block and scan through it for memory leaks.
Reviewers: tlively, aheejin, sbc100
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64900
llvm-svn: 366475
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
llvm-svn: 366442
Summary:
Commit r365249 changed usage of FileCheckNumericVariable to have one
instance of that class per variable as opposed to one instance per
definition of a given variable as was done before. However, it retained
the safety check in setValue that it should only be called with the
variable unset, even after r365625.
However this causes assert failure when a non-pseudo variable is being
redefined. And while redefinition of @LINE at each CHECK line work in
the general case, it caused problem when a substitution failed (fixed in
r365624) and still causes problem when a CHECK line does not match since
@LINE's value is cleared after substitutions in match() happened but
printSubstitutions also attempts a substitution.
This commit solves the root of the problem by changing setValue to set a
new value regardless of whether a value was set or not, thus fixing all
the aforementioned issues.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64882
llvm-svn: 366434
When code relaxation is enabled many RISC-V fixups are not resolved but
instead relocations are emitted. This happens even for DWARF debug
sections. Therefore, to properly support the parsing of DWARF debug info
we need to be able to resolve RISC-V relocations. This patch adds:
* Support for RISC-V relocations in RelocationResolver
* DWARF support for two relocations per object file offset
* DWARF changes to support relocations in more DIE fields
The two relocations per offset change is needed because some RISC-V
relocations (used for label differences) come in pairs.
Relocations can also be emitted for DWARF fields where relocations were
not yet evaluated. Adding relocation support for some of these fields is
essencial. On the other hand, LLVM currently emits RISC-V relocations
for fixups that could be safely evaluated, since they can never be
affected by code relaxations. This patch also adds relocation support
for the fields affected by those extraneous relocations (the DWARF unit
entry Length, and the DWARF debug line entry TotalLength and
PrologueLength), for testing purposes.
Differential Revision: https://reviews.llvm.org/D62062
Patch by Luís Marques.
llvm-svn: 366402
- getCompression() used to return a PDB_SourceCompression even though
the docs for IDiaInjectedSource are explicit about the return value
being compiler-dependent. Return an uint32_t instead, and make the
printing code handle unknown values better by printing "Unknown" and
the int value instead of not printing any compression.
- Print compressed contents as hex dump, not as string.
- Add compression type "DotNet", which is used (at least) by csc.exe,
the C# compiler. Also add a lengthy comment describing the stream
contents (derived from looking at the raw hex contents long enough
to see the GUIDs, which led me to the roslyn and mono implementations
for handling this).
- The native injected source dumper was dumping the contents of the
whole data stream -- but csc.exe writes a stream that's padded with
zero bytes to the next 512 boundary, and the dia api doesn't display
those padding bytes. So make NativeInjectedSource::getCode() do the
same thing.
Differential Revision: https://reviews.llvm.org/D64879
llvm-svn: 366386
This will let us instrument globals during initialization. This required
making the new PM pass a module pass, which should still provide access to
analyses via the ModuleAnalysisManager.
Differential Revision: https://reviews.llvm.org/D64843
llvm-svn: 366379
Extract the sources to the GCD of the original size and target size,
padding with implicit_def as necessary.
Also fix the case where the requested source type is wider than the
original result type. This was ignoring the type, and just using the
destination. Do the operation in the requested type and truncate back.
llvm-svn: 366367
Implement IR intrinsics for stack tagging. Generated code is very
unoptimized for now.
Two special intrinsics, llvm.aarch64.irg.sp and llvm.aarch64.tagp are
used to implement a tagged stack frame pointer in a virtual register.
Differential Revision: https://reviews.llvm.org/D64172
llvm-svn: 366360
Summary:
Since the target has no significant advantage of vectorization,
vector instructions bous threshold bonus should be optional.
amdgpu-inline-arg-alloca-cost parameter default value and the target
InliningThresholdMultiplier value tuned then respectively.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64642
llvm-svn: 366348
Summary:
ORCv1 is deprecated. The current aim is to remove it before the LLVM 10.0
release. This patch adds deprecation attributes to the ORCv1 layers and
utilities to warn clients of the change.
Reviewers: dblaikie, sgraenitz, AlexDenisov
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64609
llvm-svn: 366344
Summary:
Deduce the "willreturn" attribute for functions.
For now, intrinsics are not willreturn. More annotation will be done in another patch.
Reviewers: jdoerfert
Subscribers: jvesely, nhaehnle, nicholas, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63046
llvm-svn: 366335
The original behavior was to always emit the offsets to each call site in the
call site table as uleb128 values, however on some architectures (eg RISCV)
these uleb128 offsets into the code cannot always be resolved until link time
(because relaxation will invalidate any calculated offsets), and there are no
appropriate relocations for uleb128 values. As a consequence it needs to be
possible to specify an alternative.
This also switches RISCV to use DW_EH_PE_udata4 for call side encodings in
.gcc_except_table
Differential Revision: https://reviews.llvm.org/D63415
Patch by Edward Jones.
llvm-svn: 366329
These intrinsics do in fact work with non-constant index arguments.
These are lowered to either the generic
ISD::INSERT_VECTOR_ELT/ISD::EXTRACT_VECTOR_ELT, or to
VEXTRACT_SEXT_ELT. The handling of these all accept variable
indexes. Turning these into generic instructions which do allow
variables introduces complications in a future change to immarg
handling.
Since these just turn into generic instructions, these are kind of
pointless and should probably just be autoupgraded to
extractelement/insertelement.
llvm-svn: 366328
It is possible that exit block has two predecessors and one of them is a latch
block while another is not.
Current algorithm is based on the assumption that all exits are dedicated
and therefore we can check only first predecessor of loop exit to find all unique
exits.
However if we do not consider latch block and it is first predecessor of some
exit then this exit will be found.
Regression test is added.
As a side effect of algorithm re-writing, the restriction that all exits are dedicated
is eliminated.
Reviewers: reames, fhahn, efriedma
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D64787
llvm-svn: 366294
AMDGPU needs to allocate special argument registers separately from
the user function argument list, so needs direct control over the
CCState.
The ArgLocs argument is only really necessary because CCState doesn't
allow access to it.
llvm-svn: 366279
Summary:
Thread local variables are placed inside a `.tdata` segment. Their symbols are
offsets from the start of the segment. The address of a thread local variable
is computed as `__tls_base` + the offset from the start of the segment.
`.tdata` segment is a passive segment and `memory.init` is used once per thread
to initialize the thread local storage.
`__tls_base` is a wasm global. Since each thread has its own wasm instance,
it is effectively thread local. Currently, `__tls_base` must be initialized
at thread startup, and so cannot be used with dynamic libraries.
`__tls_base` is to be initialized with a new linker-synthesized function,
`__wasm_init_tls`, which takes as an argument a block of memory to use as the
storage for thread locals. It then initializes the block of memory and sets
`__tls_base`. As `__wasm_init_tls` will handle the memory initialization,
the memory does not have to be zeroed.
To help allocating memory for thread-local storage, a new compiler intrinsic
is introduced: `__builtin_wasm_tls_size()`. This instrinsic function returns
the size of the thread-local storage for the current function.
The expected usage is to run something like the following upon thread startup:
__wasm_init_tls(malloc(__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, kripken, sbc100
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, jfb, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64537
llvm-svn: 366272
`pretty -native -injected-sources -injected-source-content` works with
this patch, and produces identical output to the dia version.
Differential Revision: https://reviews.llvm.org/D64428
llvm-svn: 366236
Before, everything was based on some kind of type erased parser
implementation which container a lot of boilerplate code when multiple
formats were to be supported.
This simplifies it by:
* the remark now owns its arguments
* *always* returning an error from the implementation side
* working around the way the YAML parser reports errors: catch them through
callbacks and re-insert them in a proper llvm::Error
* add a CParser wrapper that is used when implementing the C API to
avoid cluttering the C++ API with useless state
* LLVMRemarkParserGetNext now returns an object that needs to be
released to avoid leaking resources
* add a new API to dispose of a remark entry: LLVMRemarkEntryDispose
llvm-svn: 366217
When e_shstrndx is broken, it is impossible to get a section name.
In this patch I improved the error message we show and
added tests for Object and for llvm-readelf/llvm-readobj
Message was changed in two places:
1) llvm-readelf/llvm-readobj previously used a code from Object/ELF.h,
now they have a modified version of it (it has less checks and allows
dumping broken things).
2) Code in Object/ELF.h is still used for generic cases.
Differential revision: https://reviews.llvm.org/D64714
llvm-svn: 366203
The jcvt intrinsic defined in ACLE [1] is available when ARM_FEATURE_JCVT is defined.
This change introduces the AArch64 intrinsic, wires it up to the instruction and a new clang builtin function.
The __ARM_FEATURE_JCVT macro is now defined when an Armv8.3-A or higher target is used.
I've implemented the target detection logic in Clang so that this feature is enabled for architectures from armv8.3-a onwards (so -march=armv8.4-a also enables this, for example).
make check-all didn't show any new failures.
[1] https://developer.arm.com/docs/101028/latest/data-processing-intrinsics
Differential Revision: https://reviews.llvm.org/D64495
llvm-svn: 366197
The first argument in the constructor was ignored, and the remaining
arguments were always passed as their defaults.
Differential Revision: https://reviews.llvm.org/D64407
llvm-svn: 366188
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366164
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366158
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
Currently AMDGPU uses a CodePatPred to check address spaces from the
MachineMemOperand. Introduce a new first class property so that the
existing patterns can be easily modified to uses the new generated
predicate, which will also be handled for GlobalISel.
I would prefer these to match against the pointer type of the
instruction, but that would be difficult to get working with
SelectionDAG compatbility. This is much easier for now and will avoid
a painful tablegen rewrite for all the loads and stores.
I'm also not sure if there's a better way to encode multiple address
spaces in the table, rather than putting the number to expect.
llvm-svn: 366128
Add "memtag" sanitizer that detects and mitigates stack memory issues
using armv8.5 Memory Tagging Extension.
It is similar in principle to HWASan, which is a software implementation
of the same idea, but there are enough differencies to warrant a new
sanitizer type IMHO. It is also expected to have very different
performance properties.
The new sanitizer does not have a runtime library (it may grow one
later, along with a "debugging" mode). Similar to SafeStack and
StackProtector, the instrumentation pass (in a follow up change) will be
inserted in all cases, but will only affect functions marked with the
new sanitize_memtag attribute.
Reviewers: pcc, hctim, vitalybuka, ostannard
Subscribers: srhines, mehdi_amini, javed.absar, kristof.beyls, hiraditya, cryptoad, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64169
llvm-svn: 366123
Summary:
Processing of command-line definition of variable and logic around
implicit not directives both reuse parsing code that expects a line
number to be defined. So far, a special line number of 0 was used for
those users of the parsing code where a line number does not make sense.
This commit instead represents line numbers as Optional values so that
they can be None for those cases.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64639
llvm-svn: 366109
Insert these during codegenprepare.
This works around a DAG issue where generic combines eliminate the and
asserting the high bits are zero, which then exposes an unknown read
source to the mul combine. It doesn't worth the hassle of trying to
insert an AssertZext or something to try to deal with it.
llvm-svn: 366094
Summary: Provides m_LibFunc pattern that can be used to match LibFuncs.
Reviewers: spatel, hfinkel, efriedma, lebedev.ri
Reviewed By: lebedev.ri
Subscribers: lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D42047
llvm-svn: 366069
Having the hash table key change during iteration is bad, so make it
impossible. Nothing relied on the key type not being const.
(This is also necessary to be able to call the const version of
iterator_facade_base::operator->(). Nothing calls this, and nothing
will, but I tried using it locally during development and it took me a
while to understand what was going wrong.)
Also rename the iterator typedef to const_iterator.
No behavior change.
Differential Revision: https://reviews.llvm.org/D64641
llvm-svn: 366060
No changes, LLD code was updated in r366057.
Original commit message:
ELF.h contains two getSymbol methods
which seems to be used only from obj2yaml.
One of these methods calls another, which in turn
contains untested error message which doesn't
provide enough information.
Problem is that after improving only just that message,
obj2yaml will not show it,
("Error reading file: yaml: Invalid data was
encountered while parsing the file" message will be shown instead),
because internal errors handling of tool is based on ErrorOr<> class which
stores a error code and as a result can only show a predefined error string, what
actually isn't very useful.
In this patch, I rework obj2yaml's error reporting system
for ELF targets to use Error Expected<> classes.
Also, I improve the error message produced
by getSymbol for demonstration of the new functionality.
Differential revision: https://reviews.llvm.org/D64631
llvm-svn: 366058
ELF.h contains two getSymbol methods
which seems to be used only from obj2yaml.
One of these methods calls another, which in turn
contains untested error message which doesn't
provide enough information.
Problem is that after improving only just that message,
obj2yaml will not show it,
("Error reading file: yaml: Invalid data was
encountered while parsing the file" message will be shown instead),
because internal errors handling of tool is based on ErrorOr<> class which
stores a error code and as a result can only show a predefined error string, what
actually isn't very useful.
In this patch, I rework obj2yaml's error reporting system
for ELF targets to use Error Expected<> classes.
Also, I improve the error message produced
by getSymbol for demonstration of the new functionality.
Differential revision: https://reviews.llvm.org/D64631
llvm-svn: 366052
Extract the code from LoopUnrollRuntime into utility function to
re-use it in D63923.
Reviewers: reames, mkuper
Reviewed By: reames
Subscribers: fhahn, hiraditya, zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D64548
llvm-svn: 366040
Teaches ARM::appendArchExtFeatures to account dependencies when processing
target features: i.e. when you say -march=armv8.1-m.main+mve.fp+nofp it
means mve.fp should get discarded too. (Split from D63936)
Differential Revision: https://reviews.llvm.org/D64048
llvm-svn: 366031
When processing the command line options march, mcpu and mfpu, we store
the implied target features on a vector. The change D62998 introduced a
temporary vector, where the processed features get accumulated. When
calling DecodeARMFeaturesFromCPU, which sets the default features for
the specified CPU, we certainly don't want to override the features
that have been explicitly specified on the command line. Therefore, the
default features should appear first in the final vector. This problem
became evident once I added the missing (unhandled) target features in
ARM::getExtensionFeatures.
Differential Revision: https://reviews.llvm.org/D63936
llvm-svn: 366027
MSVC complains about the extension to uint64_t for an addition followed by truncation back to uint32_t - add an explicit uint32_t cast to avoid this.
llvm-svn: 366020
At the moment, bitcode files with invalid forward reference can easily
cause the bitcode reader to run out of memory, by creating a forward
reference with a very high index.
We can use the size of the bitcode file as an upper bound, because a
valid bitcode file can never contain more records. This should be
sufficient to fail early in most cases. The only exception is large
files with invalid forward references close to the file size.
There are a couple of clusterfuzz runs that fail with out-of-memory
because of very high forward references and they should be fixed by this
patch.
A concrete example for this is D64507, which causes out-of-memory on
systems with low memory, like the hexagon upstream bots.
Reviewers: t.p.northover, thegameg, jfb, efriedma, hfinkel
Reviewed By: jfb
Differential Revision: https://reviews.llvm.org/D64577
llvm-svn: 366017
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch extend numeric expression to
support an arbitrary number of operands, either variable or literals.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60387
llvm-svn: 366001
Attributor::getAAFor will now only return AbstractAttributes with a
valid AbstractState. This simplifies call sites as they only need to
check if the returned pointer is non-null. It also reduces the potential
for accidental misuse.
llvm-svn: 365983
The traits object is only used by a few methods. Deserializing a hash
table and walking it is possible without the traits object, so it
shouldn't be required to build a dummy object for that use case.
The TraitsT object used to be a function template parameter before
r327647, this restores it to that state.
This makes it clear that the traits object isn't needed at all in 1 of
the current 3 uses of HashTable (and I am going to add another use that
doesn't need it), and that the default PdbHashTraits isn't used outside
of tests.
While here, also re-enable 3 checks in the test that were commented out
(which requires making HashTableInternals templated and giving FooBar
an operator==).
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D64640
llvm-svn: 365974
These should really use v32f32, but were defined as v32i32
due to the lack of the v32f32 type.
Differential Revision: https://reviews.llvm.org/D64667
llvm-svn: 365972
All callers had a PDBFile object at hand, so call
Pdb.createIndexedStream() instead, which pre-populates all the arguments
(and returns nullptr for kInvalidStreamIndex).
Also change safelyCreateIndexedStream() to only take the string index,
and update callers. Make the method public and call it in two places
that manually did the bounds checking before.
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D64633
llvm-svn: 365936
This patch series adds support for the next-generation arch13
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Assembler/disassembler support for new instructions.
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of arch13 as host processor.
Note: No currently available Z system supports the arch13
architecture. Once new systems become available, the
official system name will be added as supported -march name.
llvm-svn: 365932
Some function in the Attributor framework are unnecessarily
marked virtual. This patch removes virtual keyword
Reviewers: jdoerfert
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D64637
llvm-svn: 365925
An application linking against LLVMSupport should not get the gratuitous
set::std_new_handler call.
Reviewed By: jfb
Differential Revision: https://reviews.llvm.org/D64505
llvm-svn: 365915
Simplify things a bit by removing unnecessary full type qualification.
This also happens to avoid a build break with now-unsupported
Visual Studio 2015.
Differential Review: https://reviews.llvm.org/D64588
llvm-svn: 365913
Support SIGINFO (and SIGUSR1 for POSIX purposes) to tell what
long-running jobs are doing, as inspired by BSD tools (including on
macOS), by dumping the current PrettyStackTrace.
This adds a new kind of signal handler for non-fatal "info" signals,
similar to the "interrupt" handler that already exists for SIGINT
(Ctrl-C). It then uses that handler to update a "generation count"
managed by the PrettyStackTrace infrastructure, which is then checked
whenever a PrettyStackTraceEntry is pushed or popped on each
thread. If the generation has changed---i.e. if the user has pressed
Ctrl-T---the stack trace is dumped, though unfortunately it can't
include the deepest entry because that one is currently being
constructed/destructed.
https://reviews.llvm.org/D63750
llvm-svn: 365911
This patch improves the error messages reported for
note sections and phdrs and also makes a cleanup for
existent test case.
Differential revision: https://reviews.llvm.org/D64470
llvm-svn: 365884
llvm::yaml::Output::paddedKey unconditionally outputs spaces, which
are superfluous if the value to be dumped is a sequence or map.
Change `bool NeedsNewLine` to `StringRef Padding` so that it can be
overridden to `\n` if the value is a sequence or map.
An empty map/sequence is special. It is printed as `{}` or `[]` without
a newline, while a non-empty map/sequence follows a newline. To handle
this distinction, add another variable `PaddingBeforeContainer` and does
the special handling in endMapping/endSequence.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D64566
llvm-svn: 365869
This patch contains a port of SanitizerCoverage to the new pass manager. This one's a bit hefty.
Changes:
- Split SanitizerCoverageModule into 2 SanitizerCoverage for passing over
functions and ModuleSanitizerCoverage for passing over modules.
- ModuleSanitizerCoverage exists for adding 2 module level calls to initialization
functions but only if there's a function that was instrumented by sancov.
- Added legacy and new PM wrapper classes that own instances of the 2 new classes.
- Update llvm tests and add clang tests.
Differential Revision: https://reviews.llvm.org/D62888
llvm-svn: 365838
Introduce and deduce "nosync" function attribute to indicate that a function
does not synchronize with another thread in a way that other thread might free memory.
Reviewers: jdoerfert, jfb, nhaehnle, arsenm
Subscribers: wdng, hfinkel, nhaenhle, mehdi_amini, steven_wu,
dexonsmith, arsenm, uenoku, hiraditya, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D62766
llvm-svn: 365830
This patch improves the error messages reported for
note sections and phdrs and also makes a cleanup for
existent test case.
Differential revision: https://reviews.llvm.org/D64470
llvm-svn: 365775
The interface predates CallBase, so both it and implementation were
significantly more complicated than they needed to be. There was even
some redundancy that could be eliminated.
Should also help with OpaquePointers by not trying to derive a
function's type from it's PointerType.
llvm-svn: 365767
There is no way to set broken sh_size field currently
for sections. It can be usefull for writing the
test cases.
Differential revision: https://reviews.llvm.org/D64401
llvm-svn: 365766
There is currently an EPERM error when a regular user executes `llvm-objcopy a.o /dev/null`.
Worse, root can even change the mode bits of /dev/null.
Fix it by checking if the output file is special.
A new overload of llvm::sys::fs::setPermissions with FD as the parameter
is added. Users should provide `perm & ~umask` as the parameter if they
intend to respect umask.
The existing overload of llvm::sys::fs::setPermissions may be deleted if
we can find an implementation of fchmod() on Windows. fchmod() is
usually better than chmod() because it saves syscalls and can avoid race
condition.
Reviewed By: jakehehrlich, jhenderson
Differential Revision: https://reviews.llvm.org/D64236
llvm-svn: 365753
This patch replaces the three almost identical "strip & accumulate"
implementations for constant pointer offsets with a single one,
combining the respective functionalities. The old interfaces are kept
for now.
Differential Revision: https://reviews.llvm.org/D64468
llvm-svn: 365723
Summary:
We will need to handle IntToPtr which I will submit in a separate patch as it's
not going to be NFC.
Reviewers: eugenis, pcc
Reviewed By: eugenis
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D63940
llvm-svn: 365709
Summary: llvm/IR/GlobalValue.h can't be included in MC, that creates a circular dependency between MC and IR libraries. This circular dependency is causing an issue for build system that enforce layering.
Author: Xiangling_L
Reviewers: sfertile, jasonliu, hubert.reinterpretcast, gribozavr
Reviewed By: gribozavr
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64445
llvm-svn: 365701
Rework the TTI cache and software prefetching APIs to prepare for the
introduction of a general system model. Changes include:
- Marking existing interfaces const and/or override as appropriate
- Adding comments
- Adding BasicTTIImpl interfaces that delegate to a subtarget
implementation
- Adding a default "no information" subtarget implementation
Only a handful of targets use these interfaces currently: AArch64,
Hexagon, PPC and SystemZ. AArch64 already has a custom subtarget
implementation, so its custom TTI implementation is migrated to use
the new facilities in BasicTTIImpl to invoke its custom subtarget
implementation. The custom TTI implementations continue to exist for
the other targets with this change. They are not moved over to
subtarget-based implementations.
The end goal is to have the default subtarget implementation defer to
the system model defined by the target. With this change, the default
subtarget implementation essentially returns "no information" for
these interfaces. None of the existing users of TTI will hit that
implementation because they define their own custom TTI
implementations and won't use the BasicTTIImpl implementations.
Once system models are in place for the targets that use these
interfaces, their custom TTI implementations can be removed.
Differential Revision: https://reviews.llvm.org/D63614
llvm-svn: 365676
Previously reverted in 364141 due to buildbot breakage, and fixed here
by making GeneralCategory global a ManagedStatic.
Summary:
This change processes `OptionCategory`s and `SubCommand`s as they
are seen instead of caching them in the Option class and processing
them later. Doing so simplifies the work needed to be done by the Global
parser and significantly reduces the size of the Option class to a mere 64
bytes.
Removing the `OptionCategory` cache saved 24 bytes, and removing
the `SubCommand` cache saved an additional 48 bytes, for a total of a
72 byte reduction.
Reviewed By: serge-sans-paille
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D62105
llvm-svn: 365675
LLJITBuilder now has a setCompileFunctionCreator method which can be used to
construct a CompileFunction for the LLJIT instance being created. The motivating
use-case for this is supporting ObjectCaches, which can now be set up at
compile-function construction time. To demonstrate this an example project,
LLJITWithObjectCache, is included.
llvm-svn: 365671
Summary:
This patch simplifies 2 aspects in the FileCheckNumericVariable code.
First, setValue() method is turned into a void function since being
called only on undefined variable is an invariant and is now asserted
rather than returned. This remove the assert from the callers.
Second, clearValue() method is also turned into a void function since
the only caller does not check its return value since it may be trying
to clear the value of variable that is already cleared without this
being noteworthy.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64231
> llvm-svn: 365249
llvm-svn: 365625
Without this gcc 7.4.0 complains with
../include/llvm/CodeGen/GlobalISel/LegalizationArtifactCombiner.h:457:54: error: suggest parentheses around '&&' within '||' [-Werror=parentheses]
isArtifactCast(TmpDef->getOpcode()) &&
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
"Expecting copy or artifact cast here");
~
llvm-svn: 365597
Consolidate llvm::BWH_* statics into an enum to fix
module build issues. This fixes the LLVM_Bitcode module,
getting rid of -Wmodules-ambiguous-internal-linkage.
Differential Revision: https://reviews.llvm.org/D64469
llvm-svn: 365594
Summary:
On Windows, Posix integer file descriptors are a compatibility layer
over native file handles provided by the C runtime. There is a hard
limit on the maximum number of file descriptors that a process can open,
and the limit is 8192. LLD typically doesn't run into this limit because
it opens input files, maps them into memory, and then immediately closes
the file descriptor. This prevents it from running out of FDs.
For various reasons, I'd like to open handles to every input file and
keep them open during linking. That requires migrating MemoryBuffer over
to taking open native file handles instead of integer FDs.
Reviewers: aganea, Bigcheese
Reviewed By: aganea
Subscribers: smeenai, silvas, mehdi_amini, hiraditya, steven_wu, dexonsmith, dang, llvm-commits, zturner
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63453
llvm-svn: 365588
In SelectionDAG AMDGPU treated these as legal, but this was mostly
because the bitcasts required for FP types were painful. Theoretically
the bitpattern should eventually match to bfi, so don't bother trying
to get the patterns to import.
llvm-svn: 365583
Basically the problem is that X86 doesn't set the Fast flag from
allowsMemoryAccess on certain CPUs due to slow unaligned memory
subtarget features. This prevents bitcasts from being folded into
loads and stores. But all vector loads and stores of the same width
are the same cost on X86.
This patch merges the allowsMemoryAccess call into isLoadBitCastBeneficial to allow X86 to skip it.
Differential Revision: https://reviews.llvm.org/D64295
llvm-svn: 365549
Nilanjana Basu