Summary:
Fixes PR41828. Before this, LLD always emitted SafeSEH chunks and
defined __safe_se_handler_table & size. Now, /safeseh:no leaves those
undefined.
Additionally, we were checking for the safeseh @feat.00 flag in two
places: once to emit errors, and once during safeseh table construction.
The error was set up to be off by default, but safeseh is supposed to be
on by default. I combined the two checks, so now LLD emits an error if
an input object lacks @feat.00 and safeseh is enabled. This caused the
majority of 32-bit LLD tests to fail, since many test input object files
lack @feat.00 symbols. I explicitly added -safeseh:no to those tests to
preserve behavior.
Finally, LLD no longer sets IMAGE_DLL_CHARACTERISTICS_NO_SEH if any
input file wasn't compiled for safeseh.
Reviewers: mstorsjo, ruiu, thakis
Reviewed By: ruiu, thakis
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63570
llvm-svn: 366238
This reverts r365990 (git commit 1a6053ebc6)
The test no longer depends on the Visual C++ libraries. I confirmed that
the crash still reproduces with the new test case if I remove the null
check.
llvm-svn: 366095
Summary:
This was causing large addresses to be emitted as negative numbers,
which rightfully caused crashes in binaryen.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64612
llvm-svn: 365930
Before rL295040 the linker just crashed when a GOT relocation (R_MIPS_GOT16)
comes from a merge section. To ensure that this bug still fixed it's enough
to check that the linker does not crash and create GOT entries.
llvm-svn: 365834
E.g. for x86_64, previously each symbol's thunk was 87 bytes. Now
there's a 12 byte thunk per symbol, plus a shared 83 byte tail
function.
This is similar to what both MS link.exe and GNU tools do for
delay imports.
Differential Revision: https://reviews.llvm.org/D64288
llvm-svn: 365823
Summary:
Adds the following two options to lld-link:
-thinlto-prefix-replace: allows replacing a prefix in paths generated
for ThinLTO. This can be used to ensure index files and native object
files are stored in unique directories, allowing multiple distributed
ThinLTO links to proceed concurrently.
-thinlto-object-suffix-replace: allows replacing a suffix in object
file paths involved in ThinLTO. This allows minimized index files to
be used for the thin link while storing the paths to the full bitcode
files for subsequent steps (code generation and final linking).
Reviewers: ruiu, tejohnson, pcc, rnk
Subscribers: mehdi_amini, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64542
llvm-svn: 365807
Summary:
This implements -thinlto-index-only, -thinlto-index-only:,
and -thinlto-emit-imports-files options in lld-link. They are
analogous to their counterparts in ld.lld: -thinlto-index-only
causes us to perform ThinLTO's thin link and write index files,
but not perform code generation. -thinlto-index-only: does the
same, but also writes a text file listing the native object
files expected to be generated. -thinlto-emit-imports-files
creates a text file next to each index file, listing the files
to import from.
Reviewers: ruiu, tejohnson, pcc, rnk
Subscribers: mehdi_amini, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64461
llvm-svn: 365800
This fixes PR38549, which is silently accepted by ld.bfd.
This seems correct because it makes sense to let non-glob patterns take
precedence over glob patterns.
lld issues an error because
`assignWildcardVersion(ver, VER_NDX_LOCAL);` is processed before `assignExactVersion(ver, v.id, v.name);`.
Move all assignWildcardVersion() calls after assignExactVersion() calls
to fix this.
Also, move handleDynamicList() to the bottom. computeBinding() called by
includeInDynsym() has this cryptic rule:
if (versionId == VER_NDX_LOCAL && isDefined() && !isPreemptible)
return STB_LOCAL;
Before the change:
* foo's version is set to VER_NDX_LOCAL due to `local: *`
* handleDynamicList() is called
- foo.computeBinding() is STB_LOCAL
- foo.includeInDynsym() is false
- foo.isPreemptible is not set (wrong)
* foo's version is set to V1
After the change:
* foo's version is set to VER_NDX_LOCAL due to `local: *`
* foo's version is set to V1
* handleDynamicList() is called
- foo.computeBinding() is STB_GLOBAL
- foo.includeInDynsym() is true
- foo.isPreemptible is set (correct)
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64550
llvm-svn: 365760
In lvm2, libdevmapper.so is linked with a version script with duplicate
version assignments:
DM_1_02_138 { global: ... dm_bitset_parse_list; ... };
DM_1_02_129 { global: ... dm_bitset_parse_list; ... };
ld.bfd silently accepts this while gold issues a warning. We currently
error, thus inhibit producing the executable. Change the error to
warning to allow this case, and improve the message.
There are some cases where ld.bfd error
`anonymous version tag cannot be combined with other version tags`
but we just warn. It is probably OK for now.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D64549
llvm-svn: 365759
D64130 introduced a bug described in the following message:
https://reviews.llvm.org/D64130#1571560
The problem can happen with the following script:
SECTIONS {
.out : {
...
FILL(0x10101010)
*(.aaa)
...
}
The current code tries to read (0x10101010) as an expression and
does not break when meets *, what results in a script parsing error.
In this patch, I verify that FILL command's expression always wrapped in ().
And at the same time =<fillexp> expression can be both wrapped or unwrapped.
I checked it matches to bfd/gold.
Differential revision: https://reviews.llvm.org/D64476
llvm-svn: 365635
This puts handling of undefined symbols in a single location. Its
also more in line with the ELF backend which only reports undefined
symbols based on relocations.
One side effect is that we no longer report undefined symbols that are
only referenced in GC'd sections.
This also fixes a crash reported in the emscripten toolchain:
https://github.com/emscripten-core/emscripten/issues/8930.
Differential Revision: https://reviews.llvm.org/D64280
llvm-svn: 365553
This test was added by D64200/r365139 to check we don't merge
SHF_MERGE|SHF_STRINGS sections with different alignments (that wastes
space and can make MergeTailAlignment::Builder out of sync).
It has nothing to do with tail merge (-O2), so rename it.
llvm-svn: 365442
With this, `clang-cl /source-charset:utf-16 test.cc` now prints `invalid
value 'utf-16' in '/source-charset:utf-16'` instead of `invalid value
'utf-16' in '-finput-charset=utf-16'` before, and several other clang-cl
flags produce much less confusing output as well.
Fixes PR29106.
Since an arg and its alias can have different arg types (joined vs not)
and different values (because of AliasArgs<>), I chose to give the Alias
its own Arg object. For convenience, I just store the alias directly in
the unaliased arg – there aren't many arg objects at runtime, so that
seems ok.
Finally, I changed Arg::getAsString() to use the alias's representation
if it's present – that function was already documented as being the
suitable function for diagnostics, and most callers already used it for
diagnostics.
Implementation-wise, Arg::accept() previously used to parse things as
the unaliased option. The core of that switch is now extracted into a
new function acceptInternal() which parses as the _aliased_ option, and
the previously-intermingled unaliasing is now done as an explicit step
afterwards.
(This also changes one place in lld that didn't use getAsString() for
diagnostics, so that that one place now also prints the flag as the user
wrote it, not as it looks after it went through unaliasing.)
Differential Revision: https://reviews.llvm.org/D64253
llvm-svn: 365413
We should be generating one __start/__stop pair per output segment
not per input segment. The test wasn't catching this because it was
only linking a single object file.
Fixes PR41565
Differential Revision: https://reviews.llvm.org/D64148
llvm-svn: 365308
Since OPT_UNKNOWN args never have any values and consist only of
spelling (and are never aliased), this doesn't make any difference in
practice, but it's more consistent with Arg's guidance to use
getAsString() for diagnostics, and it matches what clang does.
Also tweak two tests to use an unknown option that contains '=' for
additional coverage while here. (The new tests pass fine with the old
code too though.)
llvm-svn: 365200
- The code tried to pass false to split()'s KeepEmpty parameter, but
instead passed it to MaxSplit. As a result, it would never split on
commas. This has been broken since the flag was added in r278056.
- The code used getSpelling() for getting the argument's values, but
getSpelling() always returns the `/debugtype:` prefix without any
values. So if any /debugtype: flag was passed, it always resulted in
an "unknown option:" warning. (The warning code then used the correct
getValue() for printing the invalid option, so the warning looked
kind of like it made sense.) This regressed in r342894.
Slightly improve the test coverage of this feature (but since I don't
know what this flag actually does, there's still no test for the correct
semantics), and add a comment to getSpelling() explaining what it does.
llvm-svn: 365182
The difference from D63432/r365015 is that this patch does not place
SHF_STRINGS sections with different alignments into the same
MergeSyntheticSection. Doing that would:
(1) create unnecessary padding and thus waste space.
Add a test tail-merge-string-align2.s to check no extra padding is created.
(2) make some input sections unaligned when tail merge (-O2) is enabled.
The alignment of MergeTailAlignment::Builder was out of sync in D63432.
MOVAPS on such unaligned strings can raise SIGSEGV.
This should fix PR42289: the Linux kernel has a use case that input
files have .rodata.cst32 sections with different alignments. The
expectation (and what ld.bfd and gold do) is that in the -r link, there
is only one .rodata.cst32 (SHF_MERGE sections with different alignments
can be combined), but lld currently creates one for each different
alignment.
The current merging strategy:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize and
sh_addralign). Merging is performed among a group, even if -O0 is specified.
2) Create one output section for each group. This is a special case in
addInputSec().
This patch changes 1) to:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize).
Merging is performed among a group, even if -O0 is specified.
We will thus create just one .rodata.cst32 . This also improves merging
efficiency when sections with the same name but different alignments are
combined.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D64200
llvm-svn: 365139
If %t1.o has a weak reference on foo, and %t2.so has a non-weak
reference on foo: `ld.lld %t1.o %t2.so -o %t`
We incorrectly set the binding of the undefined foo to STB_GLOBAL.
Fix this by ignoring undefined symbols in a SharedFile for Undefined and
SharedSymbol.
This fixes the binding of pthread_once when the program links against
both librt.so and libpthread.so
```
a.o: STB_WEAK reference to pthread_once
librt.so: STB_GLOBAL reference to pthread_once # should be ignored
libstdc++.so: STB_WEAK reference to pthread_once # should be ignored
libgcc_s.so.1: STB_WEAK reference to pthread_once # should be ignored
```
The STB_GLOBAL pthread_once issue (not fixed by D63974) can cause a link error when the result
DSO is used to link another DSO with -z defs if -lpthread is not specified. (libstdc++.so.6 not having a dependency on libpthread.so is a really nasty hack...)
We happened to create a weak undef before D63974 because libgcc_s.so.1
was linked the last and it changed the binding again to weak.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64136
llvm-svn: 365129
Summary:
Adds `--passive-segments` and `--active-segments` flags to control
what kind of segments are emitted. For now the default is always
to emit active segments so this is not a breaking change, but in
the future the default will be changed to passive segments when
shared memory is requested and active segments otherwise. When
passive segments are emitted, corresponding memory.init and
data.drop instructions are emitted in a `__wasm_init_memory`
function that is automatically called at the beginning of
`__wasm_call_ctors`.
Reviewers: sbc100, aheejin, dschuff
Subscribers: azakai, dschuff, jgravelle-google, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59343
llvm-svn: 365088
The referenced symbol is expected to point to an R_RISCV_*_HI20
relocation. An absolute symbol has no associated section, therefore
there cannot be a matching R_RISCV_*_HI20.
This fixes the crash reported by PR42038. For reference, ld.bfd errors:
(.init+0x4): dangerous relocation: %pcrel_lo missing matching %pcrel_hi
Differential Revision: https://reviews.llvm.org/D63273
llvm-svn: 365049
This reverts r365015.
David Zarzycki reported this change broke stage2 and stage3 tests. The
root cause is still not very clear, but I guess some SHF_MERGE sections
with the same name have different alignments. They were not merged
before but were merged after r365015.
Something that assumes address uniqueness of such mergeable data caused
the bug.
llvm-svn: 365048
gcc may generate .debug_info/.debug_aranges/.debug_line/etc that are
relocated by R_RISCV_ADD*/R_RISCV_SUB* pairs.
Allow R_RISCV_ADD in non-SHF_ALLOC section to fix link errors like:
ld.lld: error: print.c:(.debug_frame+0x60): has non-ABS relocation R_RISCV_ADD64 against symbol '.L0 '
Differential Revision: https://reviews.llvm.org/D63259
llvm-svn: 365035
This should fix PR42289: the Linux kernel has a use case that input
files have .rodata.cst32 sections with different alignments. The
expectation (and what ld.bfd and gold do) is that in the -r link, there
is only one .rodata.cst32 (SHF_MERGE sections with different alignments
can be combined), but lld currently creates one for each different
alignment.
The current merging strategy:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize and
sh_addralign). String merging is performed among a group, even if -O0 is specified.
2) Create one output section for each group. This is a special case in
addInputSec().
This patch changes 1) to:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize).
String merging is performed among a group, even if -O0 is specified.
We will thus create just one .rodata.cst32 . This also improves merging
efficiency when sections with the same name but different alignments are
combined.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63432
llvm-svn: 365015
This matches the wasm lld and GNU ld behavior.
The ELF linker has special handling for bitcode archives but if that
doesn't kick in we probably want to error out rather than silently
ignore the library.
Differential Revision: https://reviews.llvm.org/D63781
llvm-svn: 364998
Add Triple::riscv64 and Triple::riscv32 to getBitcodeMachineKind for get right
e_machine during LTO.
Reviewed By: ruiu, MaskRay
Differential Revision: https://reviews.llvm.org/D52165
llvm-svn: 364996
Fixes PR42442
t.o has a STB_GLOBAL undef ref to f
t2.so has a STB_WEAK undef ref to f
t1.so defines f
ld.lld t.o t1.so t2.so currently sets the binding of `f` to STB_WEAK.
This is not correct because there exists a STB_GLOBAL undef ref from a
regular object. The problem is that resolveUndefined() doesn't check
if the undef ref is seen for the first time:
if (isShared() || isLazy() || (isUndefined() && Other.Binding != STB_WEAK))
Binding = Other.Binding;
The isShared() condition should be `isShared() && !Referenced`
where Referenced is set to true after an undef ref is seen.
In practice, when linking a pthread program with glibc:
// a.o
#include <pthread.h>
pthread_mutex_t mu = PTHREAD_MUTEX_INITIALIZER;
int main() { pthread_mutex_unlock(&mu); }
{clang,gcc} -fuse-ld=lld a.o -lpthread # libpthread.so is linked before libgcc_s.so.1
The weak undef pthread_mutex_unlock in libgcc_s.so.1 makes the result
weak, which diverges from GNU linkers where STB_DEFAULT is used:
23: 0000000000000000 0 FUNC WEAK DEFAULT UND pthread_mutex_lock
(Note, if -pthread is used instead, libpthread.so will be linked **after**
libgcc_s.so.1 . lld sets the binding to the expected STB_GLOBAL)
Similar linking sequences (ld.lld t.o t1.so t2.so) appear to be used by
Go, which cause a build error https://github.com/golang/go/issues/31912.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D63974
llvm-svn: 364913
RISC-V psABI doesn't specify TLS relaxation. It can be handled the same
way as we handle ARM TLS. RISC-V TLS is even simpler because GD/LD use
the same relocation type.
Reviewed By: jrtc27, ruiu
Differential Revision: https://reviews.llvm.org/D63220
llvm-svn: 364813
* Handle initial relocation types: R_RISCV_CALL_PLT and R_RISCV_GOT_HI20.
* Produce dynamic relocation types: R_RISCV_COPY, R_RISCV_RELATIVE, R_RISCV_JUMP_SLOT.
* Define SymbolRel as R_RISCV_{32,64}
* Generate PLT header: it is used by lazy binding PLT in glibc.
* R_RISCV_CALL is changed from R_PC to R_PC_PLT. If the target symbol is preemptable, this will suppress an unnecessary "canonical PLT".
This behavior is different from ld.bfd but it is agreed the current lld behavior is favored.
I have received positive responses from the binutils maintainer that the ABI/binutils implementation can be improved, see:
https://github.com/riscv/riscv-elf-psabi-doc/issues/98https://sourceware.org/bugzilla/show_bug.cgi?id=24685
Many -no-pie/-pie/-shared programs linked against musl or glibc should work with this patch.
Reviewed By: jrtc27
Differential Revision: https://reviews.llvm.org/D63076
llvm-svn: 364812
GNU windres, and MS cvtres (unless the /readonly option is passed)
produce read-write .rsrc sections, when creating resource object files.
This caused the sections to not be added to the precreated RsrcSec,
and therefore not be added to the data directory.
Differential Revision: https://reviews.llvm.org/D63837
llvm-svn: 364660
If .rela.plt is mentioned in a linker script, it might be preserved
even if it is empty. In that case, LLD created DT_JMPREL and DT_PLTGOT
dynamic tags. When the tags exist, a dynamic loader writes values into
reserved slots in .got.plt to support lazy symbol resolution.
The problem is that, in fact, the linker has not reserved that space,
and the writing may occur into the memory allocated for something else.
Differential Revision: https://reviews.llvm.org/D63869
llvm-svn: 364639
Summary:
This is needed for address sanitizer on Emscripten. As everything in
memory starts at the value passed to --global-base, everything before
that can be used as shadow memory.
This symbol is added so that the library for the ASan runtime can know
where the shadow memory ends and real memory begins.
This is split from D63742.
Reviewers: tlively, aheejin, sbc100
Subscribers: sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63833
llvm-svn: 364467
This restores r361830 "[ELF] Error on relocations to STT_SECTION symbols if the sections were discarded"
and dependent commits (r362218, r362497) which were reverted by r364321, with a fix of a --gdb-index issue.
.rela.debug_ranges contains relocations of range list entries:
// start address of a range list entry
// old: 0; after r361830: 0
00000000000033a0 R_X86_64_64 .text._ZN2v88internal7Isolate7factoryEv + 0
// end address of a range list entry
// old: 0xe; after r361830: 0
00000000000033a8 R_X86_64_64 .text._ZN2v88internal7Isolate7factoryEv + e
If both start and end addresses of a range list entry resolve to 0,
DWARFDebugRangeList::isEndOfListEntry() will return true, then the
.debug_range decoding loop will terminate prematurely:
while (true) {
decode StartAddress
decode EndAddress
if (Entry.isEndOfListEntry()) // prematurely
break;
Entries.push_back(Entry);
}
In lld/ELF/SyntheticSections.cpp, readAddressAreas() will read
incomplete address ranges and the resulting .gdb_index will be
incomplete. For files that gdb hasn't loaded their debug info, gdb uses
.gdb_index to map addresses to CUs. The absent entries make gdb fail to
symbolize some addresses.
To address this issue, we simply allow relocations to undefined symbols
in DWARF.cpp:findAux() and let RelocationResolver resolve them.
This patch should fix:
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190603/659848.html
[2] https://bugs.chromium.org/p/chromium/issues/detail?id=978067
llvm-svn: 364391
Summary:
Before:
```
wasm-ld: error: Relocations not in offset order
```
After
```
wasm-ld: error: While processing `libjulia.so`: Relocations not in offset order
```
At least this way you get to find out which input file is malformed.
Reviewers: sbc100
Differential Revision: https://reviews.llvm.org/D63694
llvm-svn: 364368
Summary:
The list of relocations with addend in lld was missing `R_WASM_MEMORY_ADDR_REL_SLEB`,
causing `wasm-ld` to generate corrupted output. This fixes that problem and while
we're at it pulls the list of such relocations into the Wasm.h header, to avoid
duplicating it in multiple places.
Reviewers: sbc100
Differential Revision: https://reviews.llvm.org/D63696
llvm-svn: 364367
This is fairly common with wasm since GNU ar (most likely the system ar)
doesn't support the wasm object format so user who don't override AR
will end up with archives without an index. We don't want to silently
ignore this issue.
In the future we could choose to instead behave like the ELF backend and
read the symbols from each object file in the archive if they are all of
the same type. However, error'ing out seem like a conservative approach
for now.
Fixes: PR42376
Differential Revision: https://reviews.llvm.org/D63739
llvm-svn: 364338
(In effect, reverting "[ELF] Error on relocations to STT_SECTION symbols if the sections were discarded".)
It caused debug info problems in LibreOffice [1] and Chromium/V8 [2].
Reverting until those can be fixed.
It also reverts r362497 "STT_SECTION symbol should be defined" on .eh_frame, .debug*, .zdebug* and .gcc_except_table"
which was landed as a follow-up to the above.
> With -r or --emit-relocs, we warn `STT_SECTION symbol should be defined`
> on relocations to discarded section symbol. This was added as an error
> in rLLD319404, but was not so effective before D61583 (it turned the
> error to a warning).
>
> Relocations from .eh_frame .debug* .zdebug* .gcc_except_table to
> discarded .text are very common and somewhat expected. Don't warn/error
> on them. As a reference, ld.bfd has a similar logic in
> _bfd_elf_default_action_discarded() to allow these cases.
>
> Delete invalid-undef-section-symbol.test because what it intended to
> check is now covered by the updated comdat-discarded-reloc.s
>
> Delete relocatable-eh-frame.s because we allow relocations from
> .eh_frame as a special case now.
And finally it reverts r362218 "[ELF] Replace a dead test in getSymVA() with assert()"
as that also depended on the main change reverted here.
> Symbols relative to discarded comdat sections are Undefined instead of
> Defined now (after D59649 and D61583). The `== &InputSection::Discarded`
> test becomes dead. I cannot find a test related to this behavior.
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190603/659848.html
[2] https://bugs.chromium.org/p/chromium/issues/detail?id=978067
llvm-svn: 364321
lld/coff already deduplicated undefined symbols on a TU level: It would
group all references to a symbol from a single TU. This makes it so that
references from all TUs to a single symbol are grouped together.
Since lld/coff almost did what I thought it did already, the patch is
much smaller than the elf version. The only not local change is that
getSymbolLocations() now returns a vector<string> instead of a string,
so that the undefined symbol reporting code can know how many references
to a symbol exist in a given TU.
Fixes PR42260 for lld/coff.
Differential Revision: https://reviews.llvm.org/D63646
llvm-svn: 364285
r360841 introduced CommonSymbol class. An unintended behavioral change
introduced by that change was that common symbols are not internalized
by LTO under some condition. This patch fixes that issue.
The issue occurred under the following condition:
1. There exists a common symbol
2. At least one DSO is given to lld or -pie is used
If the above conditions are met, Symbol::includeInDynsym() returned a
wrong value for a common symbol.
Fixes https://bugs.llvm.org/show_bug.cgi?id=41978
Differential Revision: https://reviews.llvm.org/D63752
llvm-svn: 364273
Similar to R_AARCH64_ABS32, R_PPC64_ADDR32 can represent either a signed
value or unsigned value, thus we should use `[-2**(n-1), 2**n)` instead of
`[-2**(n-1), 2**(n-1))` to check overflows.
The issue manifests as a bogus linker error when linking the powerpc64le Linux kernel.
The new behavior is compatible with ld.bfd's complain_overflow_bitfield.
The upper bound of the error message is not correct. Fix it as well.
The changes to R_PPC_ADDR16, R_PPC64_ADDR16, R_X86_64_8 and R_X86_64_16 are similar.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63690
llvm-svn: 364164
Summary:
Our rule to create R_*_RELATIVE for absolute relocation types were
loose. D63121 made it stricter but it failed to create R_*_RELATIVE for
R_ARM_TARGET1 and R_PPC64_TOC. rLLD363236 worked around that by
reinstating the original behavior for ARM and PPC64.
This patch is an attempt to simplify the logic.
Note, in ld.bfd, R_ARM_TARGET2 --target2=abs also creates
R_ARM_RELATIVE. This seems a very uncommon scenario (moreover,
--target2=got-rel is the default), so I do not implement any logic
related to it.
Also, delete R_AARCH64_ABS32 from AArch64::getDynRel. We don't have
working ILP32 support yet. Allowing it would create an incorrect
R_AARCH64_RELATIVE.
For MIPS, the (if SymbolRel, then RelativeRel) code is to keep its
behavior unchanged.
Note, in ppc64-abs64-dyn.s, R_PPC64_TOC gets an incorrect addend because
computeAddend() doesn't compute the correct address. We seem to have the
wrong behavior for a long time. The important thing seems that a dynamic
relocation R_PPC64_TOC should not be created as the dynamic loader will
error R_PPC64_TOC is not supported.
Reviewers: atanasyan, grimar, peter.smith, ruiu, sfertile, espindola
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63383
llvm-svn: 363928
Some versions of the Visual C++ 2015 runtime have line tables with the
subsection kind of 0x800000F2. In cvinfo.h, 0x80000000 is documented to
be DEBUG_S_IGNORE. This appears to implement the intended behavior.
llvm-svn: 363724
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
llvm-svn: 363573
This matches how it is done for .xdata and .pdata already.
On i386, the symbol name in the section name suffix does not contain
the extra underscore prefix.
This is one part of a fix for PR42217.
Differential Revision: https://reviews.llvm.org/D63350
llvm-svn: 363456
In processRelocAux(), our handling of 1) link-time constant and 2) weak
undef is the same, so put them together to simplify the logic.
This moves the weak undef code around. The result is that: in a writable
section (or -z notext), we will no longer emit dynamic relocations for
weak undefined symbols.
The new behavior seems to match GNU linkers, and improves consistency
with the case of a readonly section.
The condition `!Config->Shared` was there probably because it is common
for a -shared link not to specify full dependencies. Keep it now but we
may revisit the decision in the future.
gABI says:
> The behavior of weak symbols in areas not specified by this document is
> implementation defined. Weak symbols are intended primarily for use in
> system software. Applications using weak symbols are unreliable since
> changes in the runtime environment might cause the execution to fail.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63003
llvm-svn: 363399
This patch adds new command line option `--undefined-glob` to lld.
That option is a variant of `--undefined` but accepts wildcard
patterns so that all symbols that match with a given pattern are
handled as if they were given by `-u`.
`-u foo` is to force resolve symbol foo if foo is not a defined symbol
and there's a static archive that contains a definition of symbol foo.
Now, you can specify a wildcard pattern as an argument for `--undefined-glob`.
So, if you want to include all JNI symbols (which start with "Java_"), you
can do that by passing `--undefined-glob "Java_*"` to the linker, for example.
In this patch, I use the same glob pattern matcher as the version script
processor is using, so it does not only support `*` but also `?` and `[...]`.
Differential Revision: https://reviews.llvm.org/D63244
llvm-svn: 363396
If .sdata is absent, linker synthesized __global_pointer$ gets a section index of SHN_ABS.
(ld.bfd has a similar issue: binutils PR24678)
Scrt1.o may use `lla gp, __global_pointer$` to reference the symbol PC
relatively. In -pie/-shared mode, lld complains if a PC relative
relocation references an absolute symbol (SHN_ABS) but ld.bfd doesn't:
ld.lld: error: relocation R_RISCV_PCREL_HI20 cannot refer to lute symbol: __global_pointer$
Let the reference of __global_pointer$ to force creation of .sdata to
fix the problem. This is similar to _GLOBAL_OFFSET_TABLE_, which forces
creation of .got or .got.plt .
Also, change the visibility from STV_HIDDEN to STV_DEFAULT and don't
define the symbol for -shared. This matches ld.bfd, though I don't
understand why it uses STV_DEFAULT.
Reviewed By: ruiu, jrtc27
Differential Revision: https://reviews.llvm.org/D63132
llvm-svn: 363351
PDBs may not necessarily contain an IPI stream. Handle this case
gracefully.
The test case was verified to work with MS link.exe.
Patch by Vladimir Panteleev, with a small simplification
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D63178
llvm-svn: 363213
An unrecognized signature (magic) at the beginning of a debug section
should not be a fatal error; it only means that the debug information
is in a format that is not supported by LLD. This can be due to it
being in CodeView versions 3 or earlier. These can occur in old import
libraries from legacy SDKs.
The test case was verified to work with MS link.exe.
Patch by Vladimir Panteleev!
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D63177
llvm-svn: 363212
R_RISCV_{ADD,SET,SUB}* are used for local label computation.
Add a new RelExpr member R_RISCV_ADD to represent them.
R_RISCV_ADD is treated as a link-time constant because otherwise
R_RISCV_{ADD,SET,SUB}* are not allowed in -pie/-shared mode.
In glibc Scrt1.o, .rela.eh_frame contains such relocations.
Because .eh_frame is not writable, we get this error:
ld.lld: error: can't create dynamic relocation R_RISCV_ADD32 against symbol: .L0 in readonly segment; recompil object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output
>>> defined in ..../riscv64-linux-gnu/lib/Scrt1.o
With D63076 and this patch, I can run -pie/-shared programs linked against glibc.
Note llvm-mc cannot currently produce R_RISCV_SET* so they are not tested.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63183
llvm-svn: 363128
Summary:
clang (as of 2019-06-12) / gcc (as of 8.2.1) PPC64 may emit a .rela.toc
which references an embedded switch table in a discarded .rodata/.text
section. The .toc and the .rela.toc are incorrectly not placed in the
comdat.
Technically a relocation from outside the group is not allowed by the ELF spec:
> A symbol table entry with STB_LOCAL binding that is defined relative
> to one of a group's sections, and that is contained in a symbol table
> section that is not part of the group, must be discarded if the group
> members are discarded. References to this symbol table entry from
> outside the group are not allowed.
Don't report errors to work around the bug.
This should fix the ppc64le-lld-multistage-test bot while linking llvm-tblgen:
ld.lld: error: relocation refers to a discarded section: .rodata._ZNK4llvm3MVT13getSizeInBitsEv
>>> defined in utils/TableGen/CMakeFiles/llvm-tblgen.dir/CodeGenRegisters.cpp.o
>>> referenced by CodeGenRegisters.cpp
>>> utils/TableGen/CMakeFiles/llvm-tblgen.dir/CodeGenRegisters.cpp.o:(.toc+0x0)
Some other PPC specific sections may have similar problems. We can blacklist more
section names when problems occur.
// A simple program that reproduces the bug.
// Note .rela.toc (outside the group) references a section symbol (STB_LOCAL) in a group.
void puts(const char *);
struct A {
void foo(int a) {
switch (a) {
case 0: puts("0"); break;
case 1: puts("1"); puts("1"); break;
case 2: puts("2"); break;
case 3: puts("3"); puts("4"); break;
case 4: puts("4"); break;
case 5: puts("5"); puts("5"); break;
case 6: puts("6"); break;
}
}
int a;
};
void foo(A x) { x.foo(x.a); }
Reviewers: ruiu, sfertile, espindola
Reviewed By: ruiu
Subscribers: emaste, nemanjai, arichardson, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63182
llvm-svn: 363126
Summary: Deduplicate S_CONSTANTS when linking, if they have the same value.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63151
llvm-svn: 363089
Users are exepcted to pass all .res files to the linker, which then
merges all the resource in all .res files into a tree structure and then
converts the final tree structure to a .obj file with .rsrc$01 and
.rsrc$02 sections and then links that.
If the user instead passes several .obj files containing such resources,
the correct thing to do would be to have custom code to merge the trees
in the resource sections instead of doing normal section merging -- but
link.exe rejects if multiple resource obj files are passed in with
LNK4078, so let lld-link do that too instead of silently writing broken
.rsrc sections in that case.
The only real way to run into this is if users manually convert .res
files to .obj files by running cvtres and then handing the resulting
.obj files to lld-link instead, which in practice likely never happens.
(lld-link is slightly stricter than link.exe now: If link.exe is passed
one .obj file created by cvtres, and a .res file, for some reason it
just emits a warning instead of an error and outputs strange looking
data. lld-link now errors out on mixed input like this.)
One way users could accidentally run into this is the following
scenario: If a .res file is passed to lib.exe, then lib.exe calls
cvtres.exe on the .res file before putting it in the output .lib.
(llvm-lib currently doesn't do this.)
link.exe's /wholearchive seems to only add obj files referenced from the
static library index, but lld-link current really adds all files in the
archive. So if lld-link /wholearchive is used with .lib files produced
by lib.exe and .res files were among the files handed to lib.exe, we
previously silently produced invalid output, but now we error out.
link.exe's /wholearchive semantics on the other hand mean that it
wouldn't load the resource object files from the .lib file at all.
Since this scenario is probably still an unlikely corner case,
the difference in behavior here seems fine -- and lld-link might have to
change to use link.exe's /wholearchive semantics in the future anyways.
Vaguely related to PR42180.
Differential Revision: https://reviews.llvm.org/D63109
llvm-svn: 363078
So that R_RISCV_PCREL_LO12_[IS] are considered as link-time constants in
-pie mode, otherwise there are bogus errors:
ld.lld: error: can't create dynamic relocation R_RISCV_PCREL_LO12_I against symbol: .L0 in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63123
llvm-svn: 363064
The current rule is loose: `!Sym.IsPreemptible || Expr == R_GOT`.
When the symbol is non-preemptable, this allows absolute relocation
types with smaller numbers of bits, e.g. R_X86_64_{8,16,32}. They are
disallowed by ld.bfd and gold, e.g.
ld.bfd: a.o: relocation R_X86_64_8 against `.text' can not be used when making a shared object; recompile with -fPIC
This patch:
a) Add TargetInfo::SymbolicRel to represent relocation types that resolve to a
symbol value (e.g. R_AARCH_ABS64, R_386_32, R_X86_64_64).
As a side benefit, we currently (ab)use GotRel (R_*_GLOB_DAT) to resolve
GOT slots that are link-time constants. Since we now use Target->SymbolRel
to do the job, we can remove R_*_GLOB_DAT from relocateOne() for all targets.
R_*_GLOB_DAT cannot be used as static relocation types.
b) Change the condition to `!Sym.IsPreemptible && Type != Target->SymbolicRel || Expr == R_GOT`.
Some tests are caught by the improved error checking (ld.bfd/gold also
issue errors on them). Many misuse .long where .quad should be used
instead.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63121
llvm-svn: 363059
The previous name "%lib" doesn't trigger any actual replacement. It
creates the file "./tools/lld/test/ELF/%lib.o" in the test directory.
llvm-svn: 362988
Fix buildbot failure on native AArch64 buildbot that does not have X86
backend compiled in.
Differential Revision: https://reviews.llvm.org/D63071
llvm-svn: 362926
This is implemented by the lld-link option -include:, just like
--require-defined. Contrary to --require-defined, the -u/--undefined
option allows the symbol to remain undefined in the end.
This should fix PR42121.
Differential Revision: https://reviews.llvm.org/D62876
llvm-svn: 362882
This works like /include, but is not fatal if the requested symbol
wasn't found. This allows implementing the GNU ld option -u.
Differential Revision: https://reviews.llvm.org/D62976
llvm-svn: 362881
Summary:
When handling exports from the command line or from .def files, the
linker does a "fuzzy" string lookup to allow finding mangled symbols.
However, when the symbol is re-exported under a new name, the linker has
to transfer the decorations from the exported symbol over to the new
name. This is implemented by taking the mangled symbol that was found in
the object and replacing the original symbol name with the export name.
Before this patch, LLD implemented the fuzzy search by adding an
undefined symbol with the unmangled name, and then during symbol
resolution, checking if similar mangled symbols had been added after the
last round of symbol resolution. If so, LLD makes the original symbol a
weak alias of the mangled symbol. Later, to get the original symbol
name, LLD would look through the weak alias and forward it on to the
import library writer, which copies the symbol decorations. This
approach doesn't work when bar is itself a weak alias, as is the case in
asan. It's especially bad when the aliasee of bar contains the string
"bar", consider "bar_default". In this case, we would end up exporting
the symbol "foo_default" when we should've exported just "foo".
To fix this, don't look through weak aliases to find the mangled name.
Save the mangled name earlier during fuzzy symbol lookup.
Fixes PR42074
Reviewers: mstorsjo, ruiu
Subscribers: thakis, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62984
llvm-svn: 362849
We create several types of synthetic sections for loadable partitions, including:
- The dynamic symbol table. This allows code outside of the loadable partitions
to find entry points with dlsym.
- Creating a dynamic symbol table also requires the creation of several other
synthetic sections for the partition, such as the dynamic table and hash table
sections.
- The partition's ELF header is represented as a synthetic section in the
combined output file, and will be used by llvm-objcopy to extract partitions.
Differential Revision: https://reviews.llvm.org/D62350
llvm-svn: 362819
Branch Target Identification (BTI) and Pointer Authentication (PAC) are
architecture features introduced in v8.5a and 8.3a respectively. The new
instructions have been added in the hint space so that binaries take
advantage of support where it exists yet still run on older hardware. The
impact of each feature is:
BTI: For executable pages that have been guarded, all indirect branches
must have a destination that is a BTI instruction of the appropriate type.
For the static linker, this means that PLT entries must have a "BTI c" as
the first instruction in the sequence. BTI is an all or nothing
property for a link unit, any indirect branch not landing on a valid
destination will cause a Branch Target Exception.
PAC: The dynamic loader encodes with PACIA the address of the destination
that the PLT entry will load from the .plt.got, placing the result in a
subset of the top-bits that are not valid virtual addresses. The PLT entry
may authenticate these top-bits using the AUTIA instruction before
branching to the destination. Use of PAC in PLT sequences is a contract
between the dynamic loader and the static linker, it is independent of
whether the relocatable objects use PAC.
BTI and PAC are independent features that can be combined. So we can have
several combinations of PLT:
- Standard with no BTI or PAC
- BTI PLT with "BTI c" as first instruction.
- PAC PLT with "AUTIA1716" before the indirect branch to X17.
- BTIPAC PLT with "BTI c" as first instruction and "AUTIA1716" before the
first indirect branch to X17.
The use of BTI and PAC in relocatable object files are encoded by feature
bits in the .note.gnu.property section in a similar way to Intel CET. There
is one AArch64 specific program property GNU_PROPERTY_AARCH64_FEATURE_1_AND
and two target feature bits defined:
- GNU_PROPERTY_AARCH64_FEATURE_1_BTI
-- All executable sections are compatible with BTI.
- GNU_PROPERTY_AARCH64_FEATURE_1_PAC
-- All executable sections have return address signing enabled.
Due to the properties of FEATURE_1_AND the static linker can tell when all
input relocatable objects have the BTI and PAC feature bits set. The static
linker uses this to enable the appropriate PLT sequence.
Neither -> standard PLT
GNU_PROPERTY_AARCH64_FEATURE_1_BTI -> BTI PLT
GNU_PROPERTY_AARCH64_FEATURE_1_PAC -> PAC PLT
Both properties -> BTIPAC PLT
In addition to the .note.gnu.properties there are two new command line
options:
--force-bti : Act as if all relocatable inputs had
GNU_PROPERTY_AARCH64_FEATURE_1_BTI and warn for every relocatable object
that does not.
--pac-plt : Act as if all relocatable inputs had
GNU_PROPERTY_AARCH64_FEATURE_1_PAC. As PAC is a contract between the loader
and static linker no warning is given if it is not present in an input.
Two processor specific dynamic tags are used to communicate that a non
standard PLT sequence is being used.
DTI_AARCH64_BTI_PLT and DTI_AARCH64_BTI_PAC.
Differential Revision: https://reviews.llvm.org/D62609
llvm-svn: 362793
When a function is excluded via comdat we shouldn't add it to the
final list of init functions.
Differential Revision: https://reviews.llvm.org/D62983
llvm-svn: 362769
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
We were not previously testing the comdat exclusion in bitcode objects
because we were linking two copies of the .bc file and the
`linkonce_odr` linkage type was removing the duplicate `_start` at
the LTO stage.
Now we link an bitcode and non-bitcode version both of which contains a
copy of _start. We link them in both orders, which means this test will
fail if comdat exclusion is not working correctly in bitcode parsing.
Differential Revision: https://reviews.llvm.org/D62923
llvm-svn: 362650
With r362638, llc doesn't support -relocation-model=pic with non-Emscripten
triples. Update these tests in lld which use -relocation-model=pic to also
use Emscripten triples.
llvm-svn: 362645
Although many relocatable objects will have a single
GNU_PROPERTY_X86_FEATURE_1_AND in the .note.gnu.property section it is
permissible to have more than one, and there are tests in ld.bfd that use
it. The behavior that ld.bfd follows is to set the feature bit for a
relocatable object if any of the GNU_PROPERTY_X86_FEATURE_1_AND
have the feature bit set.
Differential Revision: https://reviews.llvm.org/D62862
llvm-svn: 362591
The age field is only there to say how many times an OBJ or a PDB was incrementally linked. It shouldn't be used to validate the link between the OBJ and the PDB.
Differential Revision: https://reviews.llvm.org/D62837
llvm-svn: 362572
Summary:
With -r or --emit-relocs, we warn `STT_SECTION symbol should be defined`
on relocations to discarded section symbol. This was added as an error
in rLLD319404, but was not so effective before D61583 (it turned the
error to a warning).
Relocations from .eh_frame .debug* .zdebug* .gcc_except_table to
discarded .text are very common and somewhat expected. Don't warn/error
on them. As a reference, ld.bfd has a similar logic in
_bfd_elf_default_action_discarded() to allow these cases.
Delete invalid-undef-section-symbol.test because what it intended to
check is now covered by the updated comdat-discarded-reloc.s
Delete relocatable-eh-frame.s because we allow relocations from
.eh_frame as a special case now.
Reviewers: grimar, phosek, ruiu, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62840
llvm-svn: 362497
Summary:
- Fixes inline call frame line table display in windbg.
- Improve llvm-pdbutil to dump extra file ids.
- Warn on unknown subsections so we don't have this kind of bug in the
future.
Reviewers: inglorion, akhuang, aganea
Subscribers: eraman, zturner, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62701
llvm-svn: 362429
We need to have all input files ready before doing debuginfo type merging.
This patch is moving the late PDB type server discovery much earlier in the process, when the explicit inputs (OBJs, LIBs) are loaded.
The short term goal is to parallelize type merging.
Differential Revision: https://reviews.llvm.org/D60095
llvm-svn: 362393
The following abstract relocation types (RelExpr) are PPC64 ELFv2 ABI specific,
not used by PPC32. So rename them to prevent confusion when the PPC32 port is improved.
* R_PPC_CALL R_PPC_CALL_PLT:
R_PPC_CALL_PLT represents R_PPC64_REL14 and R_PPC64_REL24.
If the function is not preemptable, R_PPC_CALL_PLT can be optimized to R_PPC_CALL:
the formula adjusts the symbol VA from the global entry point to the local entry point.
* R_PPC_TOC: represents R_PPC64_TOC. We don't have a test. Add one to ppc64-relocs.s
Rename it to R_PPC64_TOCBASE because `@tocbase` is the assembly form.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62800
llvm-svn: 362359
In ELF v2 ABI, R_PPC64_GOT_DTPREL16* are not relaxed.
This family of relocation types are used for variables outside of 2GiB
of the TLS block. 2 instructions cannot materialize a DTPREL offset that
is not 32-bit.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62737
llvm-svn: 362357
Fixes the remaining issue of PR41673 after D61186: with `/DISCARD/ { ... } :NONE`,
we may create an output section named `/DISCARD/`.
Note, if an input section is named `/DISCARD/`, ld.bfd discards it but
lld keeps it. It is probably not worth copying this behavior as it is unrealistic.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62768
llvm-svn: 362356
(1) {gcc,clang} -fuse-ld=bfd -pie -fPIE -nostdlib a.c => .interp created
(2) {gcc,clang} -fuse-ld=lld -pie -fPIE -nostdlib a.c => .interp not created
(3) {gcc,clang} -fuse-ld=lld -pie -fPIE -nostdlib a.c a.so => .interp created
The inconsistency of (2) is due to the condition `!Config->SharedFiles.empty()`.
To make lld behave more like ld.bfd, we could change the condition to:
Config->HasDynSymTab && !Config->DynamicLinker.empty() && Script->needsInterpSection();
However, that would bring another inconsistency as can be observed with:
(4) {gcc,clang} -fuse-ld=bfd -no-pie -nostdlib a.c => .interp not created
So instead, use `!Config->DynamicLinker.empty() && Script->needsInterpSection()`,
which is both simple and consistent in these cases.
The inconsistency of (4) likely originated from ld.bfd and gold's choice to have a default --dynamic-linker.
Their condition to create .interp is ANDed with (not -shared).
Since lld doesn't have a default --dynamic-linker,
compiler drivers (gcc/clang) don't pass --dynamic-linker for -shared,
and direct ld users are not supposed to specify --dynamic-linker for -shared,
we do not need the condition !Config->Shared.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62765
llvm-svn: 362355
Delete aarch64-got.s because it is covered by aarch64-tls-iele.s
Merge got-aarch64.s into aarch64-fpic-got.s by adding disassembly to the latter
Create aarch64-gnu-ifunc-nonpreemptable to unify aarch64-gnu-ifunc3.s (position-dependent executable) and aarch64-gnu-ifunc-address-pie.s (PIE)
Rename aarch64-got-reloc.s to aarch64-got-weak-undef.s
Add --no-show-raw-insn to llvm-objdump -d RUN lines
Add -pie test to arch64-tls-iele.s
Delete aarch64-tls-pie.s: it is covered by arch64-tls-iele.s and aarch64-tls-le.s
Rename aarch64-copy2.s to aarch64-nopic-plt.s: "copy2" gives false impression that the test is related to copy relocation
llvm-svn: 362294
The test (the only test that checks getLinkerScriptLocation()) deleted
by r358652 can be restored by replacing R_X86_64_PLT32 with
R_X86_64_PC32, and changing -pie to -shared (preemptable). Then, the
symbol will not be a link-time constant and a -fPIC error will be
issued.
llvm-svn: 362207
Summary:
Add the names of the input files responsible for each error to the
messages.
Reviewers: sbc100, azakai
Subscribers: dschuff, jgravelle-google, aheejin, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62704
llvm-svn: 362162
This is a leftover from r325379.
The intention of this test was to check in a non-pic link, R_X86_64_PC32
to a STT_FUNC created a PLT. However, after the llvm-mc change in
r325569, this code path is no longer exercised. Use the r325379 trick to
keep testing R_X86_64_PC32.
llvm-svn: 362095
For the Local Dynamic case of TLSDESC, _TLS_MODULE_BASE_ is defined as a
special TLS symbol that makes:
1) Without relaxation: it produces a dynamic TLSDESC relocation that
computes 0. Adding @dtpoff to access a TLS symbol.
2) With LD->LE relaxation: _TLS_MODULE_BASE_@tpoff = 0 (lowest address in
the TLS block). Adding @tpoff to access a TLS symbol.
For 1), this saves dynamic relocations and GOT slots as otherwise
(General Dynamic) we would create an R_X86_64_TLSDESC and reserve two
GOT slots for each symbol.
Add ElfSym::TlsModuleBase and change the signature of getTlsTpOffset()
to special case _TLS_MODULE_BASE_.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62577
llvm-svn: 362078
There's no guarantee that the other partition will be loaded, so it
can't be reused.
Differential Revision: https://reviews.llvm.org/D62365
llvm-svn: 361926
This change causes us to read partition specifications from partition
specification sections and split output sections into partitions according
to their reachability from partition entry points.
This is only the first step towards a full implementation of partitions. Later
changes will add additional synthetic sections to each partition so that
they can be loaded independently.
Differential Revision: https://reviews.llvm.org/D60353
llvm-svn: 361925
This handles two initial relocation types R_X86_64_GOTPC32_TLSDESC and
R_X86_64_TLSDESC_CALL, as well as the GD->LE and GD->IE relaxations.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62513
llvm-svn: 361911
We need to have all input files ready before doing debuginfo type merging.
This patch is moving the late PDB type server discovery much earlier in the process, when the explicit inputs (OBJs, LIBs) are loaded.
The short term goal is to parallelize type merging.
Differential Revision: https://reviews.llvm.org/D60095
llvm-svn: 361842
This is implemented by creating Undefined (instead of Defined) for such
local STT_SECTION symbols. It allows us to catch errors when there are
relocations to such discarded sections (e.g. in PR41693, ld.bfd and gold
error but we don't). Updated comdat-discarded-error.s checks we emit
friendly error message.
For relocatable-eh-frame.s, ld.lld -r a.o a.o will now error
"STT_SECTION symbol should be defined" because the section .eh_frame
refers to is now an Undefined instead of a Defined.
So I have to change `error()` to `warn()` to retain the output.
rLLD361144 inadvertently enabled the error for --gdb-index
(in LLDDwarfObj<ELFT>::findAux()).
Relocations from .debug_info (not in comdat) to .text.* (in comdat) for
DW_AT_low_pc are common. If an .text.* was discarded, rLLD361144 would error,
which was unexpected. (Note, if we don't error as this patch does,
InputSection::relocateNonAlloc() will resolve such relocations).
llvm-svn: 361830
This is implemented by creating Undefined (instead of Defined) for such
local STT_SECTION symbols. It allows us to catch errors when there are
relocations to such discarded sections (e.g. in PR41693, ld.bfd and gold
error but we don't). Updated comdat-discarded-error.s checks we emit
friendly error message.
For relocatable-eh-frame.s, ld.lld -r a.o a.o will now error
"STT_SECTION symbol should be defined" because the section .eh_frame
refers to is now an Undefined instead of a Defined.
So I have to change `error()` to `warn()` to retain the output.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D61583
llvm-svn: 361792
When function signatures don't match and the undefined function is not
called directly (i.e. only has its address taken) we don't issue a
warning or create a runtime thunk for the undefined function.
Instead in this case we simply use the defined version of the function.
This is possible since checking signatures of dynamic calls happens
at runtime so any invalid usage will still result in a runtime error.
This is needed to allow C++ programs to link without generating
warnings. Its not uncommon in C++ for vtables to be populated by
function address whee the signature of the function is not known in the
compilation unit. In this case clang declares the method as void(void)
and relies on the vtable caller casting the data back to the correct
signature.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=40412
Differential Revision: https://reviews.llvm.org/D62153
llvm-svn: 361678
Shaves another 8 bytes off of SectionChunk, the most commonly allocated
type in LLD.
These indices are only valid after we've assigned chunks to output
sections and removed empty sections, so do that in a new pass.
Reviewers: ruiu, aganea
Differential Revision: https://reviews.llvm.org/D62356
llvm-svn: 361657
This can be useful for post-link tools and for testing. Sometimes
it can be useful to produces a regular executable but with relocations
preserved.
Differential Revision: https://reviews.llvm.org/D62378
llvm-svn: 361635
Patch by Stefan Schmidt.
This adds the /filealign parameter to lld, which allows to specify the
section alignment in the output file (as it does on Microsoft's
link.exe).
This is required to be able to load dynamically linked libraries on the
original Xbox, where the debugger monitor expects the section alignment
in the file to be the same as in memory.
llvm-svn: 361634
GNU readelf tool prints slightly different dynamic table "header" and
surrounds dynamic tag names by brackets. This patch implements the same
formatting for GNU-style output of the `llvm-readobj`.
LLVM
```
DynamicSection [ (13 entries)
Tag Type Name/Value
0x00000006 SYMTAB 0x168
...
]
```
GNU
```
Dynamic section at offset 0x1d0 contains 13 entries:
Tag Type Name/Value
0x00000006 (SYMTAB) 0x168
...
```
Differential Revision: https://reviews.llvm.org/D62256
llvm-svn: 361633
OptTable treats arguments starting with / that aren't a known option
as filenames. This means lld-link's and clang-cl's typo correction for
unknown flags didn't do spell checking for misspelled options that start
with /.
I first tried changing OptTable, but that got pretty messy, see PR41787
comments 2 and 3.
Instead, let lld-link's and clang's (including clang-cl's) "file not
found" diagnostic check if a non-existent file looks like it could be a
mis-spelled option, and if so add a "did you mean" suggestion to the
"file not found" diagnostic.
While here, make formatting of a few diagnostics a bit more
self-consistent.
Fixes PR41787.
Differential Revision: https://reviews.llvm.org/D62276
llvm-svn: 361518
The previous patch lost the call to PowerOf2Ceil, which causes LLD to
crash when handling common symbols with a non-power-of-2 size. I tweaked
the existing common.test to make the bsspad16 common symbol be 15 bytes
to add coverage for this case.
llvm-svn: 361426
Rather than report "undefined symbol: ", give more informative message
about the object file that defines the discarded section.
In particular, PR41133, if the section is a discarded COMDAT, print the
section group signature and the object file with the prevailing
definition. This is useful to track down some ODR issues.
We need to
* add `uint32_t DiscardedSecIdx` to Undefined for this feature.
* make ComdatGroups public and change its type to DenseMap<CachedHashStringRef, const InputFile *>
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D59649
llvm-svn: 361359
This reverts commit 7804dbddcc.
This change broke a bunch of tests of the WebAssembly waterfall.
Will hopefully reland with increased test coverage.
llvm-svn: 361273
--reproduce is a convenient option for debugging. If you invoke lld
with `--reproduce=repro.tar`, it creates `repro.tar` with all input
files and the command line options given to the linker, so that it is
very easy to run lld with the exact same inputs.
ELF and Windows lld have this option.
This patch add that option to lld/wasm.
Differential Revision: https://reviews.llvm.org/D62170
llvm-svn: 361244
For memory5.test, ld.bfd appears to ignore `. += 0x2000;`, so the test was testing
a wrong behavior. After deleting the code added in rLLD336335, we match ld.bfd and thus fix PR41357.
PR37836 (memory4.test) seems to have been fixed by another change.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62177
llvm-svn: 361228
For a reference to a local symbol, ld.bfd and gold error if the symbol
is defined in a discarded section but accept it if the symbol is
undefined. This inconsistent behavior seems unnecessary for us (it
probably makes sense for them as they differentiate local/global
symbols, the error would mean more code).
Catch such errors. Symbol index 0 may be used by marker relocations,
e.g. R_*_NONE R_ARM_V4BX. Don't error on them.
The difference from D61563 (which caused msan failure) is we don't call
Sym.computeBinding() on local symbols - VersionId is uninitialized.
llvm-svn: 361213
Reid Kleckner