Multi-configuration generators (such as Visual Studio and Xcode) allow the specification of a build flavor at build time instead of config time, so the lit configuration files need to support that - and they do for the most part. There are several places that had one of two issues (or both!):
1) Paths had %(build_mode)s set up, but then not configured, resulting in values that would not work correctly e.g. D:/llvm-build/%(build_mode)s/bin/dsymutil.exe
2) Paths did not have %(build_mode)s set up, but instead contained $(Configuration) (which is the value for Visual Studio at configuration time, for Xcode they would have had the equivalent) e.g. "D:/llvm-build/$(Configuration)/lib".
This seems to indicate that we still have a lot of fragility in the configurations, but also that a number of these paths are never used (at least on Windows) since the errors appear to have been there a while.
This patch fixes the configurations and it has been tested with Ninja and Visual Studio to generate the correct paths. We should consider removing some of these settings altogether.
Reviewed By: JDevlieghere, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96427
This diff adds llvm-bitcode-strip driver to llvm-objcopy.
In the future this will enable us to build a replacement for the tool bitcode_strip.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D87212
Summary:
When running a large test in LLVM_ENABLE_EXPENSIVE_CHECKS=ON mode,
buildbot could hit timeout.
Disable the test when this mode is on.
Also disable it for debug so that the test won't hang for too long.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D87794
This matches the changes made to handling of zlib done in 10b1b4a
where we rely on find_package and the imported target rather than
manually appending the library and include paths. The use of
LLVM_LIBXML2_ENABLED has been replaced by LLVM_ENABLE_LIBXML2
thus reducing the number of variables.
Differential Revision: https://reviews.llvm.org/D84563
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
This patch has explored several alternatives. The current semantics are similar to
what @dblaikie proposed.
`split-file filename output` splits the input file into multiple parts separated by
regex `^(.|//)--- filename` and write each part to the file `output/filename`
(`filename` can include path separators).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
# RUN: split-file %s %t
# RUN: llvm-mc %t/asm -o %t.o
# RUN: ld.lld -T %t/lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
# asm
...
# lds
...
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: split-file %s %t
// RUN: llc < %t/1.ll | FileCheck %s --check-prefix=CASE1
// RUN: llc < %t/2.ll | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
For example, when testing parsing errors if the recovery mechanism isn't possible,
grouping the tests in one file can more readily see test coverage/strategy.
//--- 1.ll
...
//--- 2.ll
...
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson, lattner
Differential Revision: https://reviews.llvm.org/D83834
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
`extract part filename` splits the input file into multiple parts separated by
regex `^(.|//)--- ` and extract the specified part to stdout or the
output file (if specified).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
// RUN: extract lds %s -o %t.lds
// RUN: extract asm %s -o %t.s
// RUN: llvm-mc %t.s -o %t.o
// RUN: ld.lld -T %t.lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: extract case1 %s | llc | FileCheck %s --check-prefix=CASE1
// RUN: extract case2 %s | llc | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
This is sometimes better than having multiple test files.
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83834
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This diff starts the implementation of llvm-libtool-darwin
(an llvm based replacement of cctool's libtool).
Libtool is used for creating static and dynamic libraries
from a bunch of object files given as input.
Reviewed by alexshap, smeenai, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D82923
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Windows doesn't properly support pass plugins (as a shared library
can't have undefined references, which pass plugins assume, being
loaded into a host process that contains provides them), thus
disable building it and the corresponding test.
This matches what was done for the passes unit test in
bc8e442188.
Differential Revision: https://reviews.llvm.org/D79771
The problem on Windows was that the \b in "..\bin" was interpreted
as an escape sequence. Use r"" strings to prevent that.
This reverts commit ab11b9eefa,
with raw strings in the lit.site.cfg.py.in files.
Differential Revision: https://reviews.llvm.org/D77184
Currently, all generated lit.site.cfg files contain absolute paths.
This makes it impossible to build on one machine, and then transfer the
build output to another machine for test execution. Being able to do
this is useful for several use cases:
1. When running tests on an ARM machine, it would be possible to build
on a fast x86 machine and then copy build artifacts over after building.
2. It allows running several test suites (clang, llvm, lld) on 3
different machines, reducing test time from sum(each test suite time) to
max(each test suite time).
This patch makes it possible to pass a list of variables that should be
relative in the generated lit.site.cfg.py file to
configure_lit_site_cfg(). The lit.site.cfg.py.in file needs to call
`path()` on these variables, so that the paths are converted to absolute
form at lit start time.
The testers would have to have an LLVM checkout at the same revision,
and the build dir would have to be at the same relative path as on the
builder.
This does not yet cover how to figure out which files to copy from the
builder machine to the tester machines. (One idea is to look at the
`--graphviz=test.dot` output and copy all inputs of the `check-llvm`
target.)
Differential Revision: https://reviews.llvm.org/D77184
and follow-ups:
a2ca1c2d "build: disable zlib by default on Windows"
2181bf40 "[CMake] Link against ZLIB::ZLIB"
1079c68a "Attempt to fix ZLIB CMake logic on Windows"
This changed the output of llvm-config --system-libs, and more
importantly it broke stand-alone builds. Instead of piling on more fix
attempts, let's revert this to reduce the risk of more breakages.
EXCLUDE_FROM_ALL means something else for add_lit_testsuite as it does
for something like add_executable. Distinguish between the two by
renaming the variable and making it an argument to add_lit_testsuite.
Differential revision: https://reviews.llvm.org/D74168
As discussed on the mailing list, I plan to introduce an ml-compatible MASM assembler as part of providing more of the Windows build tools. This will be similar to llvm-mc, but with different command-line parameters.
This placeholder is purely a stripped-down version of llvm-mc; we'll eventually add support for the Microsoft-style command-line flags, and back it with a MASM parser.
Relanding this revision after fixing ARM-compatibility issues.
Reviewers: rnk, thakis, RKSimon
Reviewed By: thakis, RKSimon
Differential Revision: https://reviews.llvm.org/D72679
Summary:
As discussed on the mailing list, I plan to introduce an ml-compatible MASM assembler as part of providing more of the Windows build tools. This will be similar to llvm-mc, but with different command-line parameters.
This placeholder is purely a stripped-down version of llvm-mc; we'll eventually add support for the Microsoft-style command-line flags, and back it with a MASM parser.
Reviewers: rnk, thakis
Reviewed By: thakis
Subscribers: merge_guards_bot, mgorny, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72679
Rather than handling zlib handling manually, use `find_package` from CMake
to find zlib properly. Use this to normalize the `LLVM_ENABLE_ZLIB`,
`HAVE_ZLIB`, `HAVE_ZLIB_H`. Furthermore, require zlib if `LLVM_ENABLE_ZLIB` is
set to `YES`, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This restores 68a235d07f,
e6c7ed6d21. The problem with the windows
bot is a need for clearing the cache.
This reverts commit 68a235d07f.
This commit broke the clang-x64-windows-msvc build bot and a follow-up
commit did not fix it. Reverting to fix the bot.
Rather than handling zlib handling manually, use `find_package` from CMake
to find zlib properly. Use this to normalize the `LLVM_ENABLE_ZLIB`,
`HAVE_ZLIB`, `HAVE_ZLIB_H`. Furthermore, require zlib if `LLVM_ENABLE_ZLIB` is
set to `YES`, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
Summary:
Make sure that llvm-locstats is updated before running lit tests even
when it's not an explicit target.
Reviewers: djtodoro, krisb, spatel
Reviewed By: djtodoro
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71611
This diff adds a new "driver" for llvm-objcopy
which is supposed to emulate the behavior of install-name-tool.
This is a recommit of b5913e6 with ubsan, test dependencies issues fixed.
Differential revision: https://reviews.llvm.org/D69146
Test plan: make check-all
This tool merges interface stub files to produce a merged interface stub file
or a stub library. Currently it for stub library generation it can produce an
ELF .so stub file, or a TBD file (experimental). It will be used by the clang
-emit-interface-stubs compilation pipeline to merge and assemble the per-CU
stub files into a stub library.
The new IFS format is as follows:
--- !experimental-ifs-v1
IfsVersion: 1.0
Triple: <llvm triple>
ObjectFileFormat: <ELF | TBD>
Symbols:
_ZSymbolName: { Type: <type>, etc... }
...
Differential Revision: https://reviews.llvm.org/D66405
llvm-svn: 370499
This reverts commits:
"Added Delta IR Reduction Tool"
"[Bugpoint redesign] Added Pass to Remove Global Variables"
"Added Tool as Dependency to tests & fixed warnings"
Reduce/remove-funcs.ll is failing on bots.
llvm-svn: 368122
This diff starts the implementation of llvm-lipo
which is supposed to be a drop-in replacement for the well-known tool lipo.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D61927
llvm-svn: 361896
Stella Stamenova