r342003 added support for emitting FPO data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the PDB
file. However, that is not the end of the story. FPO can end
up in two different destinations in a PDB, each corresponding to
a different FPO data source.
The case handled by r342003 involves copying data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the
"New FPO" stream in the PDB, which is then referred to by the
DBI stream. The case handled by this patch involves copying
records from the .debug$F section of an object file to the "FPO"
stream (or perhaps more aptly, the "Old FPO" stream) in the PDB
file, which is also referred to by the DBI stream.
The formats are largely similar, and the difference is mostly
only visible in masm generated object files, such as some of the
low-level CRT object files like memcpy. MASM doesn't appear to
support writing the DEBUG_S_FRAMEDATA subsection, and instead
just writes these records to the .debug$F section.
Although clang-cl does not emit a .debug$F section ever, lld still
needs to support it so we have good debugging for CRT functions.
Differential Revision: https://reviews.llvm.org/D51958
llvm-svn: 342080
- Log the reason for a PDB or precompiled-OBJ load failure
- Properly handle out-of-date PDB or precompiled-OBJ signature by displaying a corresponding error
- Slightly change behavior on PDB failure: any subsequent load attempt from another OBJ would result in the same error message being logged
- Slightly change behavior on PDB failure: retry with filename only if previous error was ENOENT ("no such file or directory")
- Tests: a. for native PDB errors; b. cover all the cases above
Differential Revision: https://reviews.llvm.org/D51559
llvm-svn: 341825
Following D50807, and heading towards D50664, this intermediary change does the following:
1. Upgrade all custom Error types in llvm/trunk/lib/DebugInfo/ to use the new StringError behavior (D50807).
2. Implement std::is_error_code_enum and make_error_code() for DebugInfo error enumerations.
3. Rename GenericError -> PDBError (the file will be renamed in a subsequent commit)
4. Update custom error messages to follow the same formatting: (\w\s*)+\.
5. Keep generic "file not found" (ENOENT) errors as they are in PDB code. Previously, there used to be a custom enumeration for that purpose.
6. Remove a few extraneous LF in log() implementations. Printing LF is a responsability at a higher level, not at the error level.
Differential Revision: https://reviews.llvm.org/D51499
llvm-svn: 341228
After fixing up the runtime pseudo relocation, the .refptr.<var>
will be a plain pointer with the same value as the IAT entry itself.
To save a little binary size and reduce the number of runtime pseudo
relocations, redirect references to the IAT entry (via the __imp_<var>
symbol) itself and discard the .refptr.<var> chunk (as long as the
same section chunk doesn't contain anything else than the single
pointer).
As there are now cases for both setting the Live variable to true
and false externally, remove the accessors and setters and just make
the variable public instead.
Differential Revision: https://reviews.llvm.org/D51456
llvm-svn: 341175
This patch changes relative path for source files in obj files to
absolute path in PDB when linking with added flag.
I will make obj file generated by clang-cl independent from build
directory for chromium build. But I don't want to confuse visual studio
debugger or require additional configuration. To attain this goal, I
added flag to convert relative source file path in obj to absolute path
when emitting PDB.
By removing absolute path from obj files, we can share build cache
between chromium developers even when they are doing debug build.
That will make build time faster.
More context:
https://bugs.chromium.org/p/chromium/issues/detail?id=712796https://groups.google.com/a/chromium.org/forum/#!topic/chromium-dev/5HXSVX-7fPc
llvm-svn: 337439
Previously we emitted 20-byte SHA1 hashes. This is overkill
for identifying debug info records, and has the negative side
effect of making object files bigger and links slower. By
using only the last 8 bytes of a SHA1, we get smaller object
files and ~10% faster links.
This modifies the format of the .debug$H section by adding a new
value for the hash algorithm field, so that the linker will still
work when its object files have an old format.
Differential Revision: https://reviews.llvm.org/D46855
llvm-svn: 332669
It's possible to have an empty object file, for example if you
just compile an empty .c file. This file won't have any sections
so asserting that a file has chunks is definitely wrong.
llvm-svn: 330461
Part of the DBI stream is a list of variable length structures
describing each module that contributes to the final executable.
One member of this structure is a section contribution entry that
describes the first section contribution in the output file for
the given module.
We have been leaving this structure unpopulated until now, so with
this patch it is now filled out correctly.
Differential Revision: https://reviews.llvm.org/D45832
llvm-svn: 330457
Summary:
This change does three things:
- Try to find the file and line number of an undefined symbol
reference by reading codeview debug info.
- Try to find the name of the function or global variable with the
undefined symbol reference by searching the object file's symbol
table.
- Prints the information in the same style as the ELF linker.
Differential Revision: https://reviews.llvm.org/D45467
llvm-svn: 330235
Using Config->is64() will treat ARM64 as Amd64, which is incorrect.
Furthermore, there are more esoteric architectures that could
theoretically be encountered. Just set it directly to the machine
type, which we already know anyway.
llvm-svn: 330157
Most of these are pretty trivial and obvious. Setting the toolchain
version to 14.11 is perhaps a little questionable, but we've been bitten
in the past where one of our version fields sidn't match MSVC's, and I
definitely don't want to go through that diagnosis again as it was
pretty time consuming and hard to track down.
I found all of these by using llvm-pdbutil export to dump the dbi and
pdb streams to a file, then using fc followed by llvm-pdbutil explain to
explain the mismatched bytes.
There are still some more, these are just the low hanging fruit.
Differential Revision: https://reviews.llvm.org/D45276
llvm-svn: 330130
This was reverted several times due to what ultimately turned out
to be incompatibilities in our serialized hash table format.
Several changes went in prior to this to fix those issues since
they were more fundamental and independent of supporting injected
sources, so now that those are fixed this change should hopefully
pass.
llvm-svn: 328363
When investigating bugs in PDB generation, the first step is
often to do the same link with link.exe and then compare PDBs.
But comparing PDBs is hard because two completely different byte
sequences can both be correct, so it hampers the investigation when
you also have to spend time figuring out not just which bytes are
different, but also if the difference is meaningful.
This patch fixes a couple of cases related to string table emission,
hash table emission, and the order in which we emit strings that
makes more of our bytes the same as the bytes generated by MS PDBs.
Differential Revision: https://reviews.llvm.org/D44810
llvm-svn: 328348
This is still failing on a different bot this time due to some
issue related to hashing absolute paths. Reverting until I can
figure it out.
llvm-svn: 328014
The issue causing this to fail in certain configurations
should be fixed.
It was due to the fact that DIA apparently expects there to be
a null string at ID 1 in the string table. I'm not sure why this
is important but it seems to make a difference, so set it.
llvm-svn: 328002
Natvis is a debug language supported by Visual Studio for
specifying custom visualizers. The /NATVIS option is an
undocumented link.exe flag which will take a .natvis file
and "inject" it into the PDB. This way, you can ship the
debug visualizers for a program along with the PDB, which
is very useful for postmortem debugging.
This is implemented by adding a new "named stream" to the
PDB with a special name of /src/files/<natvis file name>
and simply copying the contents of the xml into this file.
Additionally, we need to emit a single stream named
/src/headerblock which contains a hash table of embedded
files to records describing them.
This patch adds this functionality, including the /NATVIS
option to lld-link.
Differential Revision: https://reviews.llvm.org/D44328
llvm-svn: 327895
This makes the design a little more similar to the ELF linker and
should allow for features such as ARM range extension thunks to be
implemented more easily.
Differential Revision: https://reviews.llvm.org/D44501
llvm-svn: 327667
For now this is NFC, but this small refactor opens the door to
letting us embed a hash of the PDB in the build id field of the
PDB.
Differential Revision: https://reviews.llvm.org/D43913
llvm-svn: 326453
When merging in types from a type server PDB, we would use a
pointer into the type server PDB's mapped file buffer directly
to avoid copying data. However, we would close the type server
PDB after we finished merging in its types, which would unmap
all of its memory. This would lead to a use after free.
We fix this by making a strong reference in the PDBLinker class
to all referenced type server PDBs, thereby making it safe to
hold pointers into its memory mapped contents.
This fixes llvm.org/pr36455
Differential Revision: https://reviews.llvm.org/D43834
llvm-svn: 326345
Summary: Instead of fatal-ing out when missing a type server PDB, insead warn and cache the miss.
Reviewers: rnk, zturner
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42188
llvm-svn: 323893
There's some abstraction overhead in the underlying
mechanisms that were being used, and it was leading to an
abundance of small but not-free copies being made. This
showed up on a profile. Eliminating this and going back to
a low-level byte-based implementation speeds up lld with
/DEBUG between 10 and 15%.
Differential Revision: https://reviews.llvm.org/D42148
llvm-svn: 322871
The classes used to print and update time information are in
common, so other linkers could use this as well if desired.
Differential Revision: https://reviews.llvm.org/D41915
llvm-svn: 322736
This is not a record type that clang currently generates,
but it is a record that is encountered in object files generated
by cl. This record is unusual in that it refers directly to
the string table instead of indirectly to the string table via
the FileChecksums table. Because of this, it was previously
overlooked and we weren't remapping the string indices at all.
This would lead to crashes in MSVC when trying to display a
variable whose debug info involved an S_FILESTATIC.
Original bug report by Alexander Ganea
Differential Revision: https://reviews.llvm.org/D41718
llvm-svn: 321883
This adds the /DEBUG:GHASH option to LLD which will look for
the existence of .debug$H sections in linker inputs and use them
to accelerate type merging. The clang-cl side has already been
added, so this completes the work necessary to begin experimenting
with this feature.
Differential Revision: https://reviews.llvm.org/D40980
llvm-svn: 320719
A couple of places in LLD were passing references to
TypeTableCollections around, which makes it hard to change the
implementation at runtime. However, these cases only needed to
iterate over the types in the collection, and TypeCollection
already provides a handy abstract interface for this purpose.
By implementing this interface, we can get rid of the need to
pass TypeTableBuilder references around, which should allow us
to swap the implementation at runtime in subsequent patches.
llvm-svn: 319345
Now that we have only SymbolBody as the symbol class. So, "SymbolBody"
is a bit strange name now. This is a mechanical change generated by
perl -i -pe s/SymbolBody/Symbol/g $(git grep -l SymbolBody lld/ELF lld/COFF)
nd clang-format-diff.
Differential Revision: https://reviews.llvm.org/D39459
llvm-svn: 317370
Summary:
The COFF linker and the ELF linker have long had similar but separate
Error.h and Error.cpp files to implement error handling. This change
introduces new error handling code in Common/ErrorHandler.h, changes the
COFF and ELF linkers to use it, and removes the old, separate
implementations.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: smeenai, jyknight, emaste, sdardis, nemanjai, nhaehnle, mgorny, javed.absar, kbarton, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D39259
llvm-svn: 316624
The type index is from the TPI stream, not the IPI stream. Fix the
dumper, fix type index discovery, and add a test in LLD.
Also improve the log message we emit when we fail to rewrite type
indices in LLD. That's how I found this bug.
llvm-svn: 316461
Previously, our algorithm to compute a build id involved hashing the
executable and storing that as the GUID in the CV Debug Record chunk,
and setting the age to 1.
This breaks down in one very obvious case: a user adds some newlines to
a file, rebuilds, but changes nothing else. This causes new line
information and new file checksums to get written to the PDB, meaning
that the debug info is different, but the generated code would be the
same, so we would write the same build over again with an age of 1.
Anyone using a symbol cache would have a problem now, because the
debugger would open the executable, look at the age and guid, find a
matching PDB in the symbol cache and then load it. It would never copy
the new PDB to the symbol cache.
This patch implements the canonical Windows algorithm for updating
a build id, which is to check the existing executable first, and
re-use an existing GUID while bumping the age if it already
exists.
Differential Revision: https://reviews.llvm.org/D36758
llvm-svn: 310961
We don't have the right algorithm for copying S_UDT symbols
from object files to the globals stream, and having it wrong
is worse than not having it at all, since it breaks display
of local variables of UDT types (for example, "dv Foo" fails
in our current implementation, but succeeds if the S_UDT records
are omitted). Omit them until we fix the algorithm.
llvm-svn: 310867
The linker module contains a symbol of type S_COMPILE3 which
contains various information about the compiler and linker used
to create the PDB, such as the name of the linker, the target
machine, and the linker version. Interestingly, if we set the
version string to 0.0.0.0, then when trying to view local
variables WinDbg emits an error that private symbols are not
present. By setting this to a valid MSVC linker version string,
local variables can display.
As such, even though it is not representative of LLVM's version
information, we need this for compatibility.
llvm-svn: 310755
PDBs need to contain 1 module for each object file/compiland,
and a special one synthesized by the linker. This one contains
a symbol record for each output section in the executable with
its address information. This patch adds such symbols to the
linker module. Note that we also are supposed to add an
S_COFFGROUP symbol for what appears to be each input section that
contributes to each output section, but it's not entirely clear
how to generate these yet, so I'm leaving that for a separate
patch.
llvm-svn: 310754
Previously we were writing an empty globals stream. Windows
tools interpret this as "private symbols are not present in
this PDB", even when they are, so we need to fix this. Regardless,
without it we don't have information about global variables, so
we need to fix it anyway. This patch does that.
With this patch, the "lm" command in WinDbg correctly reports
that we have private symbols available, but the "dv" command
still refuses to display local variables.
Differential Revision: https://reviews.llvm.org/D36535
llvm-svn: 310743
The publics stream and globals stream are very similar. They both
contain a list of hash buckets that refer into a single shared stream,
the symbol record stream. Because of the need for each builder to manage
both an independent hash stream as well as a single shared record
stream, making the two builders be independent entities is not the right
design. This patch merges them into a single class, of which only a
single instance is needed to create all 3 streams. PublicsStreamBuilder
and GlobalsStreamBuilder are now merged into the single GSIStreamBuilder
class, which writes all 3 streams at once.
Note that this patch does not contain any functionality change. So we're
still not yet writing any records to the globals stream. All we're doing
is making it so that when we do start writing records to the globals,
this refactor won't have to be part of that patch.
Differential Revision: https://reviews.llvm.org/D36489
llvm-svn: 310438
The compiler outputs PROC32_ID symbols into the object files
for functions, and these symbols have an embedded type index
which, when copied to the PDB, refer to the IPI stream. However,
the symbols themselves are also converted into regular symbols
(e.g. S_GPROC32_ID -> S_GPROC32), and type indices in the regular
symbol records refer to the TPI stream. So this patch applies
two fixes to function records.
1. It converts ID symbols to the proper non-ID record type.
2. After remapping the type index from the object file's index
space to the PDB file/IPI stream's index space, it then
remaps that index to the TPI stream's index space by.
Besides functions, during the remapping process we were also
discarding symbol record types which we did not recognize.
In particular, we were discarding S_BPREL32 records, which is
what MSVC uses to describe local variables on the stack. So
this patch fixes that as well by copying them to the PDB.
Differential Revision: https://reviews.llvm.org/D36426
llvm-svn: 310394
Summary:
PDB section contributions are supposed to use output section indices and
offsets, not input section indices and offsets.
This allows the debugger to look up the index of the module that it
should look up in the modules stream for symbol information. With this
change, windbg can now find line tables, but it still cannot print local
variables.
Fixes PR34048
Reviewers: zturner
Subscribers: hiraditya, ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D36285
llvm-svn: 309987
We don't write any actual symbols to this stream yet, but for
now we just create the stream and hook it up to the appropriate
places and give it a valid header.
Differential Revision: https://reviews.llvm.org/D35290
llvm-svn: 309608
Summary:
MSVC link.exe records all external symbol names in the publics stream.
It provides similar functionality to an ELF .symtab.
Reviewers: zturner, ruiu
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35871
llvm-svn: 309303
Assume that the LF_TYPESERVER2 record contains Windows-style paths. In
any case, 'sys::path::filename(Path, Style::windows)' will work on
Unix-style paths.
llvm-svn: 308241
Summary:
Object files compiled with /Zi emit type information into a type server
PDB. The .debug$S section will contain a single TypeServer2Record with
the absolute path and GUID of the type server. LLD needs to load the
type server PDB and merge all types and items it finds in it into the
destination PDB.
Depends on D35495
Reviewers: ruiu, inglorion
Subscribers: zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35504
llvm-svn: 308235
Summary:
We were treating the GUIDs in TypeServer2Record as strings, and the
non-ASCII bytes in the GUID would not round-trip through YAML.
We already had the PDB_UniqueId type portably represent a Windows GUID,
but we need to hoist that up to the DebugInfo/CodeView library so that
we can use it in the TypeServer2Record as well as in PDB parsing code.
Reviewers: inglorion, amccarth
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35495
llvm-svn: 308234
Summary:
Instead of wiring these through the CVTypeVisitor interface, clients
should inspect the CVTypeArray before visiting it and potentially load
up the type server's TPI stream if they need it.
No tests relied on this functionality because LLD was the only client.
Reviewers: ruiu
Subscribers: mgorny, hiraditya, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35394
llvm-svn: 308212
Summary:
We've accumulated about five or so data structures that are widely
referenced:
- PDBBuilder
- Type table
- Id table
- PDB string table
- Type server handler
I'm about to rewrite type server handling, and I need a new class in LLD
where I can put its state. By creating a new PDBLinker class, I hope to
put it there next.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35392
llvm-svn: 307979
Summary:
This fixes type indices for SDK or CRT static archives. Previously we'd
try to look next to the archive object file path, which would not exist
on the local machine.
Also error out if we can't resolve a type server record. Hypothetically
we can recover from this error by discarding debug info for this object,
but that is not yet implemented.
Reviewers: ruiu, amccarth
Subscribers: aprantl, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35369
llvm-svn: 307946
Revert "[PDB] Tweak bad type index error handling"
check-lld with asan detects use-after-poison.
This reverts commits r307733 and r307726.
llvm-svn: 307752
Translate invalid type indices to a sentinel value instead of skipping
the record. Skipping records isn't a good recovery method, because we
can skip a scope open or close record, which will confuse the scope
management code.
We currently have lots of invalid type indices on Microsoft-provided
standard libraries, because the LF_TYPESERVER2 records contain absolute
paths that are only valid on their build servers. Our type server
handlers need to look at other things (GUIDs) to find these type server
PDBs.
llvm-svn: 307726
This is part of the continuing effort to increase parity between
LLD and MSVC PDBs. link still doesn't like our PDBs, so the most
obvious thing to check was whether adding an empty publics stream
would get it to do something else. It still fails in the same way
but at least this removes one more variable from the equation.
The next logical step would be to try creating an empty globals
stream.
Differential Revision: https://reviews.llvm.org/D35224
llvm-svn: 307598
lld-link is apparently a symlink to lld. Our pdb writing code
uses llvm::sys::fs::getMainExecutable() and writes that value
into the PDB, which will resolve symlinks etc. But what we
really want is the exact value of argv[0], which matches what
the MS linker does. Fix this by just writing argv[0] instead
of calling getMainExecutable.
llvm-svn: 307592
1) Don't write a /src/headerblock stream. This appears to be
written conditionally by MSVC, but it's not clear what the
condition is. For now, just remove it since we dont' know
what it is anyway and the particular pdb we've checked in
for the test doesn't have one.
2) Write a valid timestamp for the PDB file signature. This
leads to non-reproducible builds, but it matches the default
behavior of link, so it should be out default as well. If
we need reproducibility, we should add a separate command
line option for it that is off by default.
3) Write an empty FPO stream. MSVC seems to always write an
FPO stream. This change makes the stream directory match
up, although we still need to make the contents of the FPO
stream match.
llvm-svn: 307436
Without this we would just append whatever the user
wrote on the command line, so if we're in C:\foo
and we run lld-link bar/baz.obj, we would write
C:\foo\bar/baz.obj in various places in the PDB.
MSVC linker does not do this, so we shouldn't either.
This fixes some differences in the diff test, so we
update the test as well.
Differential Revision: https://reviews.llvm.org/D35092
llvm-svn: 307423
A couple of things were different about our generated PDBs.
1) We were outputting the wrong Version on the PDB Stream.
The version we were setting was newer than what MSVC is setting.
It's not clear what the implications are, but we change LLD
to use PdbImplVC70, as MSVC does.
2) For the optional debug stream indices in the DBI Stream, we
were outputting 0 to mean "the stream is not present". MSVC
outputs uint16_t(-1), which is the "correct" way to specify
that a stream is not present. So we fix that as well.
3) We were setting the PDB Stream signature to 0. This is supposed
to be the result of calling time(nullptr). Although this leads
to non-deterministic builds, a better way to solve that is by
having a command line option explicitly for generating a
reproducible build, and have the default behavior of lld-link
match the default behavior of link.
To test this, I'm making use of the new and improved `pdb diff`
sub command. To make it suitable for writing tests against, I had
to modify the diff subcommand slightly to print less verbose output.
Previously it would always print | <column> | <value1> | <value2> |
which is quite verbose, and the values are fragile. All we really
want to know is "did we produce the same value as link?" So I added
command line options to print a single character representing the
result status (different, identical, equivalent), and another to
hide the value display. Note that just inspecting the diff output
used to write the test, you can see some things that are obviously
wrong. That is just reflective of the fact that this is the state
of affairs today, not that we're asserting that this is "correct".
We can use this as a starting point to discover differences, fix
them, and update the test.
Differential Revision: https://reviews.llvm.org/D35086
llvm-svn: 307422
Based strictly on the name, this seems to have something to do
width edit & continue. The goal of this patch has nothing to do
with supporting edit and continue though. msvc link.exe writes
very basic information into this area even when *not* compiling
with support for E&C, and so the goal here is to bring lld-link
to parity. Since we cannot know what assumptions standard tools
make about the content of PDB files, we need to be as close as
possible.
This ECNames data structure is a standard PDB string hash table.
link.exe puts a single string into this hash table, which is the
full path to the PDB file on disk. It then references this string
from the module descriptor for the compiler generated `* Linker *`
module.
With this patch, lld-link will generate the exact same sequence of
bytes as MSVC link for this subsection for a given object file
input (as reported by `llvm-pdbutil bytes -ec`).
llvm-svn: 307356
Summary:
There are a variety of records that open scopes: function scopes, block
scopes, and inlined call site scopes. These symbol records contain
Parent and End fields with the offsets of other symbol records. The End
field contains the offset of the matching S_END or S_INLINESITE_END
record. The Parent field contains the offset of the parent record, or 0
if this is a top-level scope (i.e. a function).
With this change, `llvm-pdbutil pretty -all` no longer crashes on PDBs
produced by LLD. I haven't tried a real debugger yet.
Reviewers: zturner, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34898
llvm-svn: 307278
Summary:
The main complexity in adding symbol records is that we need to
"relocate" all the type indices. Type indices do not have anything like
relocations, an opaque data structure describing where to find existing
type indices for fixups. The linker just has to "know" where the type
references are in the symbol records. I added an overload of
`discoverTypeIndices` that works on symbol records, and it seems to be
able to link the standard library.
Reviewers: zturner, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34432
llvm-svn: 305933
Summary:
Previously we didn't add debug info chunks to the SparseChunks array, so
they didn't participate in section GC. Now we do.
Reviewers: ruiu
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D34356
llvm-svn: 305811
Summary:
This is a first step towards getting line info to show up in VS and
windbg. So far, only llvm-pdbutil can parse the PDBs that we produce.
cvdump doesn't like something about our file checksum tables. I'll have
to dig into that next.
This patch adds a new DebugSubsectionRecordBuilder which takes bytes
directly from some other producer, such as a linker, and sticks it into
the PDB. Line tables only need to be relocated. No data needs to be
rewritten.
File checksums and string tables, on the other hand, need to be re-done.
Reviewers: zturner, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34257
llvm-svn: 305713
Summary:
Expose the module descriptor index and fill it in for section
contributions.
Reviewers: zturner
Subscribers: llvm-commits, ruiu, hiraditya
Differential Revision: https://reviews.llvm.org/D34126
llvm-svn: 305296
Object files have symbol records not aligned to any particular
boundary (e.g. 1-byte aligned), while PDB files have symbol
records padded to 4-byte aligned boundaries. Since they share
the same reading / writing code, we have to provide an option to
specify the alignment and propagate it up to the producer or
consumer who knows what the alignment is supposed to be for the
given container type.
Added a test for this by modifying the existing PDB -> YAML -> PDB
round-tripping code to round trip symbol records as well as types.
Differential Revision: https://reviews.llvm.org/D33785
llvm-svn: 304484
Originally this was intended to be set up so that when linking
a PDB which refers to a type server, it would only visit the
PDB once, and on subsequent visitations it would just skip it
since all the records had already been added.
Due to some C++ scoping issues, this was not occurring and it
was revisiting the type server every time, which caused every
record to end up being thrown away on all subsequent visitations.
This doesn't affect the performance of linking clang-cl generated
object files because we don't use type servers, but when linking
object files and libraries generated with /Zi via MSVC, this means
only 1 object file has to be linked instead of N object files, so
the speedup is quite large.
llvm-svn: 303920
LazyRandomTypeCollection is designed for random access, and in
order to provide this it lazily indexes ranges of types. In the
case of types from an object file, there is no partial index
to build off of, so it has to index the full stream up front.
However, merging types only requires sequential access, and when
that is needed, this extra work is simply wasted. Changing the
algorithm to work on sequential arrays of types rather than
random access type collections eliminates this up front scan.
llvm-svn: 303707
Previous algotirhm assumed that types and ids are in a single
unified stream. For inputs that come from object files, this
is the case. But if the input is already a PDB, or is the result
of a previous merge, then the types and ids will already have
been split up, in which case we need an algorithm that can
accept operate on independent streams of types and ids that
refer across stream boundaries to each other.
Differential Revision: https://reviews.llvm.org/D33417
llvm-svn: 303577
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
llvm-svn: 303446
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
llvm-svn: 303409
Right now we have multiple notions of things that represent collections of
types. Most commonly used are TypeDatabase, which is supposed to keep
mappings from TypeIndex to type name when reading a type stream, which
happens when reading PDBs. And also TypeTableBuilder, which is used to
build up a collection of types dynamically which we will later serialize
(i.e. when writing PDBs).
But often you just want to do some operation on a collection of types, and
you may want to do the same operation on any kind of collection. For
example, you might want to merge two TypeTableBuilders or you might want
to merge two type streams that you loaded from various files.
This dichotomy between reading and writing is responsible for a lot of the
existing code duplication and overlapping responsibilities in the existing
CodeView library classes. For example, after building up a
TypeTableBuilder with a bunch of type records, if we want to dump it we
have to re-invent a bunch of extra glue because our dumper takes a
TypeDatabase or a CVTypeArray, which are both incompatible with
TypeTableBuilder.
This patch introduces an abstract base class called TypeCollection which
is shared between the various type collection like things. Wherever we
previously stored a TypeDatabase& in some common class, we now store a
TypeCollection&.
The advantage of this is that all the details of how the collection are
implemented, such as lazy deserialization of partial type streams, is
completely transparent and you can just treat any collection of types the
same regardless of where it came from.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303388
With the forthcoming codeview::StringTable which a pdb::StringTable
would hold an instance of as one member, this ambiguity becomes
confusing. Rename to PDBStringTable to avoid this.
llvm-svn: 301948
Zachary Turner