When InstCombine initially populates the worklist, it already
performs constant folding and DCE. However, as the instructions
are initially visited in program order, this DCE can pick up only
the last instruction of a dead chain, the rest would only get
picked up in the main InstCombine run.
To avoid this, we instead perform the DCE in separate pass over the
collected instructions in reverse order, which will allow us to
pick up full dead instruction chains. We already need to do this
reverse iteration anyway to populate the worklist, so this
shouldn't add extra cost.
This by itself only fixes a small part of the problem though:
The same basic issue also applies during the main InstCombine loop.
We generally always want DCE to occur as early as possible,
because it will allow one-use folds to happen. Address this by also
performing DCE while adding deferred instructions to the main worklist.
This drops the number of tests that perform more than 2 InstCombine
iterations from ~80 to ~40. There's some spurious test changes due
to operand order / icmp toggling.
Differential Revision: https://reviews.llvm.org/D75008
When constructing a ParsedAttr the ParsedAttrInfo gets looked up in the
AttrInfoMap, which is auto-generated using tablegen. If that lookup fails then
we look through the ParsedAttrInfos that plugins have added to the registry and
check if any has a spelling that matches.
Differential Revision: https://reviews.llvm.org/D31338
Use UnaryOperator::CreateFNeg instead.
Summary:
With the introduction of the native fneg instruction, the
fsub -0.0, %x idiom is obsolete. This patch makes LLVM
emit fneg instead of the idiom in all places.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75130
WebAssembly enforces a rule that caller and callee signatures must
match. This means that the traditional technique of passing `main`
`argc` and `argv` even when it doesn't need them doesn't work.
Currently the backend renames `main` to `__original_main`, however this
doesn't interact well with LTO'ing libc, and the name isn't intuitive.
This patch allows us to transition to `__main_argc_argv` instead.
This implements the proposal in
https://github.com/WebAssembly/tool-conventions/pull/134
with a flag to disable it when targeting Emscripten, though this is
expected to be temporary, as discussed in the proposal comments.
Differential Revision: https://reviews.llvm.org/D70700
WebAssembly requires that caller and callee signatures match, so it
can't do the usual trick of passing more arguments to main than it
expects. Instead WebAssembly will mangle "main" with argc/argv
parameters as "__main_argc_argv". This patch teaches lld how to
demangle it.
This patch is part of https://reviews.llvm.org/D70700.
This tries to improve the accuracy of extract/insert element costs by accounting for subvector extraction/insertion for >128-bit vectors and the shuffling of elements to/from the 0'th index.
It also adds INSERTPS for f32 types and PINSR/PEXTR costs for integer types (at the moment we assume the same cost as MOVD/MOVQ - which isn't always true).
Differential Revision: https://reviews.llvm.org/D74976
Summary:
Error reporting in DebugInfoDWARF library currently done in three ways :
1. Direct calls to WithColor::error()/WithColor::warning()
2. ErrorPolicy defaultErrorHandler(Error E);
3. void dumpWarning(Error Warning);
additionally, other locations could have more variations:
lld/ELF/SyntheticSection.cpp
if (Error e = cu->tryExtractDIEsIfNeeded(false)) {
error(toString(sec) + ": " + toString(std::move(e)));
DebugInfo/DWARF/DWARFUnit.cpp
if (Error e = tryExtractDIEsIfNeeded(CUDieOnly))
WithColor::error() << toString(std::move(e));
Thus error reporting could look inconsistent. To have a consistent error
messages it is necessary to have a possibility to redefine error
reporting functions. This patch creates two handlers and allows to
redefine them. It also patches all places inside DebugInfoDWARF
to use these handlers.
The intention is always to use following handlers for error reporting
purposes inside DebugInfoDWARF:
DebugInfo/DWARF/DWARFContext.h
std::function<void(Error E)> RecoverableErrorHandler = WithColor::defaultErrorHandler;
std::function<void(Error E)> WarningHandler = WithColor::defaultWarningHandler;
This is last patch from series of patches: D74481, D74635, D75118.
Reviewers: jhenderson, dblaikie, probinson, aprantl, JDevlieghere
Reviewed By: jhenderson
Subscribers: grimar, hiraditya, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D74308
Summary:
Currently the dependence analysis in LLVM is unable to compute accurate
dependence vectors for multi-dimensional fixed size arrays.
This is mainly because the delinearization algorithm in scalar evolution
relies on parametric terms to be present in the access functions. In the
case of fixed size arrays such parametric terms are not present, but we
can use the indexes from GEP instructions to recover the subscripts for
each dimension of the arrays. This patch adds this ability under the
existing option `-da-disable-delinearization-checks`.
Authored By: bmahjour
Reviewer: Meinersbur, sebpop, fhahn, dmgreen, grosser, etiotto, bollu
Reviewed By: Meinersbur
Subscribers: hiraditya, arphaman, Whitney, ppc-slack, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72178
Summary:
User can select the version of SYCL the compiler will
use via the flag -sycl-std, similar to -cl-std.
The flag defines the LangOpts.SYCLVersion option to the
version of SYCL. The default value is undefined.
If driver is building SYCL code, flag is set to the default SYCL
version (1.2.1)
The preprocessor uses this variable to define CL_SYCL_LANGUAGE_VERSION macro,
which should be defined according to SYCL 1.2.1 standard.
Only valid value at this point for the flag is 1.2.1.
Co-Authored-By: David Wood <Q0KPU0H1YOEPHRY1R2SN5B5RL@david.davidtw.co>
Signed-off-by: Ruyman Reyes <ruyman@codeplay.com>
Subscribers: ebevhan, Anastasia, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72857
Signed-off-by: Alexey Bader <alexey.bader@intel.com>
Summary:
AffineApplyNormalizer provides common logic for folding affine maps that appear
in affine.apply into other affine operations that use the result of said
affine.apply. In the process, affine maps of both operations are composed.
During the composition `A.compose(B)` the symbols from the map A are placed
before those of the map B in a single concatenated symbol list. However,
AffineApplyNormalizer was ordering the operands of the operation being
normalized by iteratively appending the symbols into a single list accoridng to
the operand order, regardless of whether these operands are symbols of the
current operation or of the map that is being folded into it. This could lead
to wrong order of symbols and, when the symbols were bound to constant values,
to visibly incorrect folding of constants into affine maps as reported in
PR45031. Make sure symbols operands to the current operation are always placed
before symbols coming from the folded maps.
Update the test that was exercising the incorrect folder behavior. For some
reason, the order of symbol operands was swapped in the test input compared to
the previous operations, making it easy to assume the correct maps were
produced whereas they were swapping the symbols back due to the problem
described above.
Closes https://bugs.llvm.org/show_bug.cgi?id=45031
Differential Revision: https://reviews.llvm.org/D75247
Summary:
No longer merge 'name' and ':' into a single token.
Ensure that line breaks cannot be placed before or after a named-argument colon.
Ensure that no space is inserted before a named-argument colon.
Reviewers: krasimir
Reviewed By: krasimir
Subscribers: cfe-commits, MyDeveloperDay
Tags: #clang-format, #clang
Differential Revision: https://reviews.llvm.org/D75244
This will address the issue: P8198 and P8199 (from D73534).
The methods was not handle bundles properly.
Differential Revision: https://reviews.llvm.org/D74904
Summary:
The following intrinsics are added:
* @llvm.aarch64.sve.ldff1.gather
* @llvm.aarch64.sve.ldff1.gather.index
* @llvm.aarch64.sve.ldff1.gather_sxtw
* @llvm.aarch64.sve.ldff1.gather.uxtw
* @llvm.aarch64.sve.ldff1.gather_sxtw.index
* @llvm.aarch64.sve.ldff1.gather.uxtw.index
* @llvm.aarch64.sve.ldff1.gather.scalar.offset
Although this patch is quite substantial, the vast majority of the
implementation is just a 'copy & paste' of the implementation of regular
gather loads, including tests. There's only a handful of new
definitions:
* AArch64ISD nodes defined in AArch64ISelLowering.h (e.g. GLDFF1)
* Seleciton DAG Types in AArch64SVEInstrInfo.td (e.g.
AArch64ldff1_gather)
* intrinsics in IntrinsicsAArch64.td (e.g. aarch64_sve_ldff1_gather)
* Pseudo instructions in SVEInstrFormats.td to workaround the issue of
use-before-def for the FFR register.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D75128
The code in llvmorg-10-init-12188-g25ce33a6e4f is a breaking change for
users of older linkers who don't pass a version parameter, which
prevents a drop-in clang upgrade. Old tools can't know about what future
tools will do, so as a general principle the burden should be new tools
to be compatible by default. Also, for comparison, none of the other
tests of Version within AddLinkArgs add any new behaviors unless the
version is explicitly specified. Therefore, this patch changes the
-platform_version behavior from opt-out to opt-in.
Patch by David Major!
Differential revision: https://reviews.llvm.org/D74784
-debug-only=inline-cost does not exist in optimized builds without
asserts and therefore the test fails for such configurations.
Related revision: c965fd942f
Under fp16 we optimise the bitcast between a VMOVhr and a CopyToReg via
custom lowering. This rewrites that to be a DAG combine instead, which
helps produce better code in the cases where the bitcast is actaully
legal.
Differential Revision: https://reviews.llvm.org/D72753
MC currently does not emit these relocation types, and lld does not
handle them. Add FKF_Constant as a work-around of some ARM code after
D72197. Eventually we probably should implement these relocation types.
By Fangrui Song!
Differential revision: https://reviews.llvm.org/D72892
Currently we only show the user that the expression failed but not
what is actually wrong with it. This just dumps the error we get
back alongside the other output to the error stream.
This should also help with finding out with why sometimees the
TestWatchLocationWithWatchSet.py test fails here on the LLDB
incremental bot on Green Dragon.
Summary:
If the describeLoadedValue() hook produced a DIExpression when
describing a instruction, and it was not possible to emit a call site
entry directly (the value operand was not an immediate nor a preserved
register), then that described value could not be inserted into the
worklist, and would instead be dropped, meaning that the parameter's
call site value couldn't be described.
This patch extends the worklist so that each entry has an DIExpression
that is built up when iterating through the instructions.
This allows us to describe instruction chains like this:
$reg0 = mv $fp
$reg0 = add $reg0, offset
call @call_with_offseted_fp
Since DW_OP_LLVM_entry_value operations can't be combined with any other
expression, such call site entries will not be emitted. I have added a
test, dbgcall-site-expr-entry-value.mir, which verifies that we don't
assert or emit broken DWARF in such cases.
Reviewers: djtodoro, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D75036
Summary:
This is a preparatory patch for D75036, in which a debug expression is
associated with each parameter register in the worklist. In that patch
the two lambda functions addToWorklist() and finishCallSiteParams() grow
a bit, so move those out to separate functions. This patch also prepares
for each parameter register having their own expression moving the
creation of the DbgValueLoc into finishCallSiteParams().
Reviewers: djtodoro, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D75050
The GetOffset documentation was copied from the function above
so I completely deleted that one. The rest was just outdated
documentation that didn't keep up with renamed or changed
function parameters/return types.
I made that file by pasting together several pieces, and forgot to
take out the #include <arm_mve.h> from the tops of the later ones, so
the test was pointlessly including the same header five times. NFC.
Nikita Popov