1. Using mach port number, just like when inferior is paused.
2. Use key:value pair of thread used time instead of comma separated notation.
llvm-svn: 172012
Add unconditional logging messages to every place in debugserver
where we send a SIGKILL signal or do a ptrace PT_KILL call to
terminate the inferior process. When the debuggee is silently
killed off, the console logging from debugserver can disambiguate
whether debugserver killed off the process because it failed to
completely set it up, becuase it was told to (via the "k" packet),
or if some external daemon killed it.
llvm-svn: 171606
Update the debugserver "qProcessInfo" implementation to return the
cpu type, cpu subtype, OS and vendor information just like qHostInfo
does so lldb can create an ArchSpec based on the returned values.
Add a new GetProcessArchitecture to GDBRemoteCommunicationClient akin
to GetHostArchitecture. If the qProcessInfo packet is supported,
GetProcessArchitecture will return the cpu type / subtype of the
process -- e.g. a 32-bit user process running on a 64-bit x86_64 Mac
system.
Have ProcessGDBRemote set the Target's architecture based on the
GetProcessArchitecture when we've completed an attach/launch/connect.
llvm-svn: 170491
This can be used by lldb to ask for information
about the process debugserver is attached to/launched.
Particularly useful on a 64-bit x86 Mac system which
can run 32-bit or 64-bit user-land processes.
llvm-svn: 170409
This should be more consistent with the notion of command success/failure and avoids spewing warnings that the user might not care about
There will need to be an option to specify the level of verbosity desired (never show anything, only show failures, errors and warning, everything)
llvm-svn: 170167
Fixing an issue where errors in command files sourced as arguments to command-line lldb (e.g. ./lldb -s foo.cmd) would not be shown to the user
llvm-svn: 170146
- remove unused members
- add NO_PEDANTIC to selected Makefiles
- fix return values (removed NULL as needed)
- disable warning about four-char-constants
- remove unneeded const from operator*() declaration
- add missing lambda function return types
- fix printf() with no format string
- change sizeof to use a type name instead of variable name
- fix Linux ProcessMonitor.cpp to be 32/64 bit friendly
- disable warnings emitted by swig-generated C++ code
Patch by Matt Kopec!
llvm-svn: 169645
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
Cleaned up the option parsing code to always pass around the short options as integers. Previously we cast this down to "char" and lost some information. I recently added an assert that would detect duplicate short character options which was firing during the test suite.
This fix does the following:
- make sure all short options are treated as "int"
- make sure that short options can be non-printable values when a short option is not required or when an option group is mixed into many commands and a short option is not desired
- fix the help printing to "do the right thing" in all cases. Previously if there were duplicate short character options, it would just not emit help for the duplicates
- fix option parsing when there are duplicates to parse options correctly. Previously the option parsing, when done for an OptionGroup, would just start parsing options incorrectly by omitting table entries and it would end up setting the wrong option value
llvm-svn: 169189
Prevent async and sync calls to get profile data from stomping on each other.
At the same time, don't use '$' as end delimiter per chunk of profile data.
llvm-svn: 168948
DebugClang builds of LLDB to build a properly
codesigned debugserver. I did this by adding
a DebugClang configuration to debugserver that's
just a clone of the Debug configuration.
llvm-svn: 168746
Then make the Thread a Broadcaster, and get it to broadcast when the selected frame is changed (but only from the Command Line) and when Thread::ReturnFromFrame
changes the stack.
Made the Driver use this notification to print the new thread status rather than doing it in the command.
Fixed a few places where people were setting their broadcaster class by hand rather than using the static broadcaster class call.
<rdar://problem/12383087>
llvm-svn: 165640
Fixed an issue where if we call "Process::Destroy()" and the process is running, if we try to stop it and get "exited" back as the stop reason, we will still deliver the exited event.
llvm-svn: 163591
Add an lldb command line option to specify a core file: --core/-c.
For consistency, change the "target create" command to also use --core.
llvm-svn: 161993
Convert from calling Halt in the lldb Driver.cpp's input reader's sigint handler to sending this AsyncInterrupt so it can be handled in the
event loop.
If you are attaching and get an async interrupt, abort the attach attempt.
Also remember to destroy the process if get interrupted while attaching.
Getting this to work also required handing the eBroadcastBitInterrupt in a few more places in Process WaitForEvent & friends.
<rdar://problem/10792425>
llvm-svn: 160903
calling functions. This is necessary on Mac OS X, since bad things can happen if you set
the registers of a thread that's sitting in a kernel trap.
<rdar://problem/11145013>
llvm-svn: 160756
Allow debugserver to match process names that are longer than MAXCOMLEN (16) characters. We do this by digging up argv[0] from another sysctl if the process name supplied is longer than 16 characters.
llvm-svn: 160487
Designate MachThreadList as a transaction coordinator when doing Enable/DisableHardwareWatchpoint on the list of threads.
In case the operation (iterating on the threads and doing enable/disable) fails in the middle, we rollback the already
enabled/disabled threads to their checkpointed states. When all the threads succeed in enable/disable, we ask each thread
to finsih the transaction and commit the change of the debug state.
llvm-svn: 157858
Add default Process::GetWatchpointSupportInfo() impl which returns an error of "not supported".
Add "qWatchpointSupportInfo" packet to the gdb communication layer to support this, and modify TestWatchpointCommands.py to test it.
llvm-svn: 157345
Switch over to the "*-apple-macosx" for desktop and "*-apple-ios" for iOS triples.
Also make the selection process for auto selecting platforms based off of an arch much better.
llvm-svn: 156354
should be MasterPlans that want to stay on the plan stack. So make all plans NOT
MasterPlans by default and then have the SB API's and the CommandObjectThread step
commands set this explicitly.
Also added a "clean up" phase to the Thread::ShouldStop so that if plans get stranded
on the stack, we can remove them. This is done by adding an IsPlanStale method to the
thread plans, and if the plan can know that it is no longer relevant, it returns true,
and the plan and its sub-plans will get discarded.
llvm-svn: 156101
Just call SBDebugger::SetTerminalWidth on the driver's SBDebugger, which does the same job, but no locks.
Also add the value checking to SetTerminalWidth you get with SetInternalVariable(..., "term-width", ...).
rdar://problem/11310563
llvm-svn: 155665
QListThreadsInStopReply
This GDB remote query command can enable added a "threads" key/value pair to all stop reply packets so that we always get a list of all threads in each stop reply packet. It increases performance if enabled (the reply to the "QListThreadsInStopReply" is "OK") by saving us from sending to command/reply pairs (the "qfThreadInfo" and "qsThreadInfo" packets), and also helps us keep the current process state up to date.
llvm-svn: 154380
We do this by delegating to two available Watchpoint Register Pairs (wvr, wcr). With
each pair handling the 4 bytes of (uint64_t)variable.
llvm-svn: 153300
that the inferior cannot execute past the watchpoint-triggering instruction.
The solution is disable the watchpoint before resuming the inferior and make it hardware single step;
when the inferior stops again due to single step, re-enable the watchpoint and disable the single step
to make the inferior able to continue again without obstacle.
rdar://problem/9667960
llvm-svn: 153273
However, the debugserver cannot get past the instruction which triggered the watchpoint.
So a workaround is in place for the time being which disables the triggered watchpoint
before resuming.
Lots of commented out printf's remain in the source which needs to be cleaned up.
WIP rdar://problem/9667960
llvm-svn: 153228
On darwin, if child process of process being debugged dies due to mach exception, the debugged process will die.
debugserver now only handles the mach exceptions for the task being debugged.
llvm-svn: 152291
Added a new makefile target to help us with Apple builds where the installhdrs
will copy the headers for the shared library. Prior to this fix, the install
headers directory would contain the unix style paths to all public header
files ("#include lldb/API/SBDefines.h") instead of the fixed up framework
header paths ("#include <LLDB/SBDefines.h>").
llvm-svn: 152253
Fixed STDERR to not be opened as readable. Also cleaned up some of the code that implemented the file actions as some of the code was using the wrong variables, they now use the right ones (in for stdin, out for stdout, err for stderr).
llvm-svn: 152102
"desktop" - build all binaries with XPC
"desktop_no_xcp" - build all binaries with none of the XPC binaries
"ios" - build all binaries with special iOS install settings.
Bumped the Xcode project build version for lldb-118 and debugserver-169.
llvm-svn: 151740
Added the ability to override command line commands. In some cases GUI interfaces
might want to intercept commands like "quit" or "process launch" (which might cause
the process to re-run). They can now do so by overriding/intercepting commands
by using functions added to SBCommandInterpreter using a callback function. If the
callback function returns true, the command is assumed to be handled. If false
is returned the command should be evaluated normally.
Adopted this up in the Driver.cpp for intercepting the "quit" command.
llvm-svn: 151708
Python.h is a bad c++ citizen and overwrites some functions with its own
macros. This conflicts with libc++'s locale header. I did some refactoring
to use Python.h only where it's actually needed a few months ago so
the unnecessary includes can be removed now.
llvm-svn: 151168
the lldb_private::StackFrame objects hold onto a weak pointer to the thread
object. The lldb_private::StackFrame objects the the most volatile objects
we have as when we are doing single stepping, frames can often get lost or
thrown away, only to be re-created as another object that still refers to the
same frame. We have another bug tracking that. But we need to be able to
have frames no longer be able to get the thread when they are not part of
a thread anymore, and this is the first step (this fix makes that possible
but doesn't implement it yet).
Also changed lldb_private::ExecutionContextScope to return shared pointers to
all objects in the execution context to further thread harden the internals.
llvm-svn: 150871
otherwise we will have a launched process stopped at the entry point and
it will get reparented when debugserver goes away and we won't be able to
kill the process later.
llvm-svn: 149622
instances to not pthread_cancel the read threads and wreak havoc on the mutex
in our ConnectionFileDescriptor class.
Also cleaned up some shutdown delays.
llvm-svn: 149355
a new POSIX platform. It also contains fixes for 64bit FreeBSD.
The patch is based on changes by Mark Peek <mp@FreeBSD.org> and
"K. Macy" <kmacy@freebsd.org> in their github repo located at
https://github.com/fbsd/lldb.
llvm-svn: 147609
We will return a valid range when possible and omit the "permissions" key
when the memory is not readable, writeable or executeable. This will help us
know the difference between an error back from this packet and unsupported,
from just "this address isn't in a valid region".
llvm-svn: 146394
will allow us to represent a process/thread ID using a pointer for the OS
plug-ins where they might want to represent the process or thread ID using
the address of the process or thread structure.
llvm-svn: 145644
from a process and hooked it up to the new packet that was recently added
to our GDB remote executable named debugserver. Now Process has the following
new calls:
virtual Error
Process::GetMemoryRegionInfo (lldb::addr_t load_addr, MemoryRegionInfo &range_info);
virtual uint32_t
GetLoadAddressPermissions (lldb::addr_t load_addr);
Only the first one needs to be implemented by subclasses that can add this
support.
Cleaned up the way the new packet was implemented in debugserver to be more
useful as an API inside debugserver. Also found an error where finding a region
for an address actually will pick up the next region that follows the address
in the query so we also need ot make sure that the address we requested the
region for falls into the region that gets returned.
llvm-svn: 144976
Add a more general purpose qMemoryRegionInfo packet which can
describe various attributes about a memory region. Currently it
will return the start address, size, and permissions (read, write,
executable) for the memory region. It may be possible to add
additional attributes in the future such as whether the region is
designated as stack memory or jitted code a la vmmap.
I still haven't implemented the lldb side of the code to use this
packet yet so there may be unexpected behavior - but the basic implementation looks
about right. I'll hook it up to lldb soon and fix any problems that crop up.
llvm-svn: 144175
whether a given address is in an executable region of memory or
not. I haven't written the lldb side that will use this packet it
hasn't been tested yet but it's a simple enough bit of code.
I want to have this feature available for the unwinder code. When
we're stopped at an address with no valid symbol context, there are
a number of questions I'd like to ask --
is the current pc value in an executable region (e.g. did they
jump to unallocated/unexecutable memory? we know how to unwind
from here if so.)
Is the stack pointer or the frame pointer the correct register
to use to find the caller's saved pc value?
Once we're past the first frame we can trust things like eh_frame
and ABI unwind schemes but the first frame is challenging and having
a way to check potential addresses to see if they're executable or
not would help narrow down the possibilities a lot.
llvm-svn: 144074
be in the target. All of the environment, args, stdin/out/err files, etc have
all been moved. Also re-enabled the ability to launch a process in a separate
terminal on MacOSX.
llvm-svn: 144061
Jim Ingham