The sketch test case writes avg+stddev for all its metrics:
<key>fetch-frames</key>
<dict>
<key>description</key>
<string>time to dump backtrace for every frame in every thread</string>
<key>stddev</key>
<real>0.006270938361432314</real>
<key>value</key>
<real>0.011568079851851851</real>
</dict>
llvm-svn: 179550
Moving over to source-regex might be a good idea, but it’s not what we really want to test. Ideally, we would set a regex breakpoint to find the right line, then delete it and set one by file and line with the right line info from before.
llvm-svn: 179246
if we have an updated task_info call available; else fall back to getting
the default host-wide page size.
Update all uses of the vm page size to get it via MachVMMemory::PageSize().
<rdar://problem/13477763>, <rdar://problem/13498504>
llvm-svn: 178953
LLDB now can use a single dash for all long options for all commands form the command line and from the command interpreter. This involved just switching all calls from getopt_long() to getopt_long_only().
llvm-svn: 178789
Try and reap process when sending the "k" packet to avoid a race condition. We now wait for at most 1 second to reap the child process that we are killing.
llvm-svn: 178726
number in RNBRemote::HandlePacket_qProcessInfo -- add a new
GetCurrentThreadMachPort() so callers who need to make a mach
thred_get_state() call at the RNBRemote level will have a way to
get the port number.
llvm-svn: 178619
- make an overload of Launch() that takes an init list of const char* if all you need to tweak in the launch info are the command-line arguments
- make Run() return an int that you can use as an exit-code
- make dynamic values work properly when recursing in FetchVariables()
- make the po output more obvious in verbose mode
llvm-svn: 178578
To hook it up to individual test cases:
- define GetLongOptions() in your test case class to return something other than NULL (hopefully an array of options :-)
- implement ParseOption() to check for the short option char and do the right thing - return true at the end if you want more options to come your way or false if you don’t
- make sure that your Setup() call takes int& and char**& so that optind post-processing can happen - and call TestCase::Setup from your setup
llvm-svn: 178482
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
- memory delta and time for: target create
- memory delta and time for: setting breakpoint at main by name
- time to launch and hit bp at main
- overall memory of target create + bp main + run to main
- ovarall time of target create + bp main + run to main
llvm-svn: 177808
to in INADDR_LOOPBACK mode by default ("localhost only")
instead of INADDR_ANY ("accept connections from any system").
Add a new command line argument to debugserver, --open-connection
or -H which will enable the previous behavior. It would be used
if you were doing two-system debugging, with lldb running on one
system and debugserver running on the other. But it is a less
common workflow and should not be the default.
<rdar://problem/12583284>
llvm-svn: 177790
- Added new abtract Results class to keep CoreFoundation out of the tests. There are many subclasses for different settings:
Results::Result::Dictionary
Results::Result::Array
Results::Result::Unsigned
Results::Result::Double
Results::Result::String
- Gauge<T> can now write themselves out via a templatized write to results function:
template <class T>
Results::ResultSP GetResult (const char *description, T value);
- There are four specializations of this so far:
template <>
Results::ResultSP GetResult (const char *description, double value);
template <>
Results::ResultSP GetResult (const char *description, uint64_t value);
template <>
Results::ResultSP GetResult (const char *description, std::string value);
template <>
Results::ResultSP GetResult (const char *description, MemoryStats value);
- Don't emit the virtual memory reading from the task info call as it really doesn't mean much as it includes way too much (shared cache + other stuff we don't have control over)
- Fixed other test cases to build correctly and use the new classes
llvm-svn: 177696
This is especially useful to take measurements that span multiple test steps, or where you need to have different operations fall under the same measurement
An example of use is in the formatters perf test case
llvm-svn: 177597
- TestCase.m_thread is now filled in with the first thread that has a valid
stop reason. This eliminates the need for the SelectMyThread() functions.
- The first thread that stops for a reason is also set as the selected thread
in the process in case any command line commands are run.
- Changed launch over to take a SBLaunchInfo parameter so that the launch
function doesn't keep getting new arguments as they are needed.
- TestCase::Setup() and TestCase::Launch(SBLaunchInfo) now return bool to
indicate success of setup and launch.
- ActionWanted::Next(SBThread) was renamed to ActionWanted::StepOver(SBThread)
- ActionWanted::Finish(SBThread) was renamed to ActionWanted::StepOut(SBThread)
llvm-svn: 177376
Fixed a crasher in the SourceManager where it wasn't checking the m_target member variable for NULL.
In doing this fix, I hardened this class to have weak pointers to the debugger and target in case they do go away. I also changed SBSourceManager to hold onto weak pointers to the debugger and target so they don't keep objects alive by holding a strong reference to them.
llvm-svn: 177365
- don't use preprocessor macros
- use switch statements
- don't put anything in the lldb namespace, use "lldb_perf" namespace.
- Pass the action struct into each TestStep() for each step fill in
- Modify the ActionWanted class to have accessors to make the continue, next, finish, kill instead of using preproc macros
llvm-svn: 177332
Added logging that will show up in the system console when we try to resume a process that is already running, or has an unexpected state.
llvm-svn: 176960
Drop the old f registers from debugserver's register list. Add the
NEON 128-bit q registers to debugserver, support reading and writing.
Add the new contains / invalidates mappings for the s, d, and q
registers so lldb will know what registers overlay what other registers.
Change the default format of s and d registers to be floating point
instead of hex. Remove some UTF-8 hyphen chars in comments in the ARM
register number definition headers.
<rdar://problem/13121797>
llvm-svn: 176915
This is a very basic implementation of a library that easily allows to drive LLDB.framework to write test cases for performance
This is separate from the LLDB testsuite in test/ in that:
a) this uses C++ instead of Python to avoid measures being affected by SWIG
b) this is in very early development and needs lots of tweaking before it can be considered functionally complete
c) this is not meant to test correctness but to help catch performance regressions
There is a sample application built against the library (in darwin/sketch) that uses the famous sample app Sketch as an inferior to measure certain basic parameters of LLDB's behavior.
The resulting output is a PLIST much like the following:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<array>
<dict>
<key>fetch-frames</key>
<real>0.13161715522222225</real>
</dict>
<dict>
<key>file-line-bkpt</key>
<real>0.029111678750000002</real>
</dict>
<dict>
<key>fetch-modules</key>
<real>0.00026376766666666668</real>
</dict>
<dict>
<key>fetch-vars</key>
<real>0.17820429311111111</real>
</dict>
<dict>
<key>run-expr</key>
<real>0.029676525769230768</real>
</dict>
</array>
</plist>
Areas for improvement:
- code cleanups (I will be out of the office for a couple days this coming week, but please keep ideas coming!)
- more metrics and test cases
- better error checking
This toolkit also comprises a simple event-loop-driven controller for LLDB, similar yet much simpler to what the Driver does to implement the lldb command-line tool.
llvm-svn: 176715
Make it configurable what to profile.
For Mac, we don't use the dirty page size yet and hence there is no need to gather that. This should be way better in not draining the battery since we are operating between 0% to 0.1% on the Mac after this change.
llvm-svn: 176451
own port namepsace) as the thread identifier to using the system-wide
globally unique thread id as the thread identifier number.
MachThread.cpp keeps both the unique id and the mach port number
for each thread. All layers outside MachThread class use the unique
id with three exceptions: (1) Mach exceptions come in with the port
number (thread_port) which needs to be translated, (2) any calls to
low-level thread_get_state/thread_set_state/thread_suspend etc need
to use the mach port number, (3) MachThreadList::UpdateThreadList
which creates the MachThread objects gets the unique id and passes
it to the MachThread ctor as an argument.
In general, any time nub_thread_t is used, it is now referring to a
unique thread id. Any time a thread_t is used, it is now referring
to a mach port number. There was some interchangability of these
types previously. nub_thread_t has also been changed to a 64-bit
type which necessitated some printf specification string changes.
I haven't been able to test these changes extensively yet but want
to checkpoint the work. The scenarios I've been testing are all
working correctly so while there may be some corner cases I haven't
hit yet, I think it is substantially correct.
<rdar://problem/12931414>
llvm-svn: 175870
Also added a TimeSpecTimeout class which can be used with any calls that take a "struct timespec *" as an argument. It is used by the KQueue class.
Also updated some project settings.
llvm-svn: 175377
hitting auto-continue signals while running a thread plan would cause us to lose control of the debug
session.
<rdar://problem/12993641>
llvm-svn: 174793
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
reply to be hex encoded, not decimal.
Fix the whitespace in the container-regs/invalidate-regs
documentation, fix one ambiguous hex/decimal number in an
example.
llvm-svn: 173225
Fixed the 32, 16, and 8 bit pseudo regs for x86_64 (real reg of "rax" which subvalues "eax", "ax", etc...) to correctly get updated when stepping. Also fixed it so actual registers can specify what other registers must be invalidated when a register is modified. Previously, only pseudo registers could invalidate other registers.
Modified the LLDB qRegisterInfo extension to the GDB remote interface to support specifying the containing registers with the new "container-regs" key whose value is a comma separated list of register numbers. Also added a "invalidate-regs" key whose value is also a comma separated list of register numbers.
Removed the hack GDBRemoteDynamicRegisterInfo::Addx86_64ConvenienceRegisters() function and modified "debugserver" to specify the registers correctly using the new "container-regs" and "invalidate-regs" keys.
llvm-svn: 173096
Swap in index ids for thread ids in GDBRemoteCommunicationClient. Besides dealing with the async logic, I have to take care of the situation when the inferior paused as well.
llvm-svn: 172869
Prevent profiling from working on older debugserver. Just a simple renaming since the caller is prepared to handle the ‘unimplemented’ answer.
llvm-svn: 172583
document some simple bourne shell to re-generate these from the DNBDefs.h
header file in case this needs to be done again in the future.
llvm-svn: 172494
Enrico Granata