As of b1d8576 there is middle-end support for STRICT_[SU]INT_TO_FP,
so this patch adds SystemZ back-end support as well.
The patch is SystemZ target specific except for adding SD patterns
strict_[su]int_to_fp and any_[su]int_to_fp to TargetSelectionDAG.td
as usual.
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
This patch implements the following changes:
1) SelectionDAGBuilder::visitConstrainedFPIntrinsic currently treats
each constrained intrinsic like a global barrier (e.g. a function call)
and fully serializes all pending chains. This is actually not required;
it is allowed for constrained intrinsics to be reordered w.r.t one
another or (nonvolatile) memory accesses. The MI-level scheduler already
allows for that flexibility, so it makes sense to allow it at the DAG
level as well.
This patch therefore changes the way chains for constrained intrisincs
are created, and handles them basically like load operations are handled.
This has the effect that constrained intrinsics are no longer serialized
against one another or (nonvolatile) loads. They are still serialized
against stores, but that seems hard to change with the current DAG chain
setup, and it also doesn't seem to be a big problem preventing DAG
2) The OPC_CheckFoldableChainNode check requires that each of the
intermediate nodes in a multi-node pattern match only has a single use.
This check tends to fail if those intermediate nodes are strict operations
as those have a chain output that typically indeed has another use.
However, we don't really need to consider chains here at all, since they
will all be rewritten anyway by UpdateChains later. Other parts of the
matcher therefore already ignore chains, but this hasOneUse check doesn't.
This patch replaces hasOneUse by a custom test that verifies there is no
more than one use of any non-chain output value.
In theory, this change could affect code unrelated to strict FP nodes,
but at least on SystemZ I could not find any single instance of that
happening
3) The SystemZ back-end currently does not allow matching multiply-and-
extend operations (32x32 -> 64bit or 64x64 -> 128bit FP multiply) for
strict FP operations. This was not possible in the past due to the
problems described under 1) and 2) above.
With those issues fixed, it is now possible to fully support those
instructions in strict mode as well, and this patch does so.
Differential Revision: https://reviews.llvm.org/D70913
Now that constrained fpto[su]i intrinsic are available,
add codegen support to the SystemZ backend.
In addition to pure back-end changes, I've also needed
to add the strict_fp_to_[su]int and any_fp_to_[su]int
pattern fragments in the obvious way.
llvm-svn: 370674
This implements a small enhancement to https://reviews.llvm.org/D55506
Specifically, while we were able to match strict FP nodes for
floating-point extend operations with a register as source, this
did not work for operations with memory as source.
That is because from regular operations, this is represented as
a combined "extload" node (which is a variant of a load SD node);
but there is no equivalent using a strict FP operation.
However, it turns out that even in the absence of an extload
node, we can still just match the operations explicitly, e.g.
(strict_fpextend (f32 (load node:$ptr))
This patch implements that method to match the LDEB/LXEB/LXDB
SystemZ instructions even when the extend uses a strict-FP node.
llvm-svn: 364450
The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).
This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.
To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:
- A new MCID flag "mayRaiseFPException" that the target should set on any
instruction that possibly can raise FP exception according to the
architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
instruction resulting from expansion of any constrained FP intrinsic.
Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).
Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.
The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.
This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.
Reviewed By: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D55506
llvm-svn: 362663
This adds the FPC (floating-point control register) as a reserved
physical register and models its use by SystemZ instructions.
Note that only the current rounding modes and the IEEE exception
masks are modeled. *Changes* of the FPC due to exceptions (in
particular the IEEE exception flags and the DXC) are not modeled.
At this point, this patch is mostly NFC, but it will prevent
scheduling of floating-point instructions across SPFC/LFPC etc.
llvm-svn: 360570
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Change
subreg_r32 -> subreg_h32
subreg_r64 -> subreg_h64
subreg_hr32 -> subreg_hh32
The subregisters subreg_r32 and subreg_r64 were added to emphasize the
fact that modifying these subregisters may clobber the entire register.
This is not necessarily the case for subreg_h32, et al.
However, the ability to compose subreg_h64 with subreg_r32, and with
subreg_h32 and subreg_l32 at the same time makes the compositions be
treated as non-overlapping (leading to problems when tracking subreg
liveness). See D50468 for more details.
Differential Revision: https://reviews.llvm.org/D50725
llvm-svn: 339778
If we have LOCR instructions, select them directly from SelectionDAG
instead of first going through a pseudo instruction and then using
the custom inserter to emit the LOCR.
Provide Select pseudo-instructions for VR32/VR64 if we have vector
instructions, to avoid having to go through the first 16 FPRs
unnecessarily.
If we do not have LOCFHR, prefer using LOCR followed by a move
over a conditional branch.
llvm-svn: 331191
If the MachineInstr uses a custom inserter and is then erased after
instruction selection, there is no use for mapping it to a sched class.
Review: Ulrich Weigand
llvm-svn: 331040
This has proven a healthy exercise, as many cases of incorrect instruction
flags were corrected in the process. As part of this, IntrWriteMem was added
to several SystemZ instrinsics.
Furthermore, a bug was exposed in TwoAddress with this change (as incorrect
hasSideEffects flags were removed and instructions could now be sunk), and
the test case for that bugfix (r319646) is included here as
test/CodeGen/SystemZ/twoaddr-sink.ll.
One temporary test regression (one extra copy) which will hopefully go away
in upcoming patches for similar cases:
test/CodeGen/SystemZ/vec-trunc-to-i1.ll
Review: Ulrich Weigand.
https://reviews.llvm.org/D40437
llvm-svn: 319756
This adds support for the new 128-bit vector float instructions of z14.
Note that these instructions actually only operate on the f128 type,
since only each 128-bit vector register can hold only one 128-bit
float value. However, this is still preferable to the legacy 128-bit
float instructions, since those operate on pairs of floating-point
registers (so we can hold at most 8 values in registers), while the
new instructions use single vector registers (so we hold up to 32
value in registers).
Adding support includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions. This includes allocating the f128
type now to the VR128BitRegClass instead of FP128BitRegClass.
- Scheduler description support for the instructions.
Note that for a small number of operations, we have no new vector
instructions (like integer <-> 128-bit float conversions), and so
we use the legacy instruction and then reformat the operand
(i.e. copy between a pair of floating-point registers and a
vector register).
llvm-svn: 308196
This adds assembler / disassembler support for the hexadecimal
floating-point instructions. Since the Linux ABI does not use
any hex float data types, these are not useful for codegen.
llvm-svn: 304202
This adds the remaining general arithmetic instructions
for assembler / disassembler use. Most of these are not
useful for codegen; a few might be, and those are listed
in the README.txt for future improvements.
llvm-svn: 302665
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
llvm-svn: 288525
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
llvm-svn: 286285
Define a couple of additional semantic classes and use them
throughout the .td files to make them more consistent and
more easily readable.
No functional change.
llvm-svn: 286268
This changes the InstRR (and related) patterns to no longer
automatically add an "r" at the end of the mnemonic. This
makes the .td files more obviously understandable, and also
allows using the patterns for those few instructions that
do not follow the *r scheme.
Also add some more sub-formats of the RRF format class, to
match operand names and sequence from the PoP better.
No functional change.
llvm-svn: 286267
The names of the tablegen defs now match the names of the ISD nodes.
This makes the world a slightly saner place, as previously "fround" matched
ISD::FP_ROUND and not ISD::FROUND.
Differential Revision: https://reviews.llvm.org/D23597
llvm-svn: 279129
On the z13, it turns out to be more efficient to access a full
floating-point register than just the upper half (as done e.g.
by the LE and LER instructions).
Current code already takes this into account when loading from
memory by using the LDE instruction in place of LE. However,
we still generate LER, which shows the same performance issues
as LE in certain circumstances.
This patch changes the back-end to emit LDR instead of LER to
implement FP32 register-to-register copies on z13.
llvm-svn: 263431
Since the LTxBRCompare instructions can't be used with vector registers, a
normal load-and-test instruction (with a modelled def operand) is used instead.
Reviewed by Ulrich Weigand.
llvm-svn: 249664
Add generic instructions for load complement, load negative and load positive
for fp32 and fp64, and let isel prefer them. They do not clobber CC, and so
give scheduler more freedom. SystemZElimCompare pass will convert them when it
can to the CC-setting variants.
Regression tests updated to expect the new opcodes in places where the old ones
where used. New test case SystemZ/fp-cmp-05.ll checks that
SystemZCompareElim.cpp can handle the new opcodes.
README.txt updated (bullet removed).
Note that fp128 is not yet handled, because it is relatively rare, and is a
bit trickier, because of the fact that l.dfr would operate on the sign bit of
one of the subregisters of a fp128, but we would not want to copy the other
sub-reg in case src and dst regs are not the same.
Reviewed by Ulrich Weigand.
llvm-svn: 249046
The z13 vector facility includes some instructions that operate only on the
high f64 in a v2f64, effectively extending the FP register set from 16
to 32 registers. It's still better to use the old instructions if the
operands happen to fit though, since the older instructions have a shorter
encoding.
Based on a patch by Richard Sandiford.
llvm-svn: 236524
At the moment, all subregs defined by the SystemZ target can be modified
independently of the wider register. E.g. writing to a GR32 does not
change the upper 32 bits of the GR64. Writing to an FP32 does not change
the lower 32 bits of the FP64.
Hoewver, the upcoming support for the vector extension redefines FP64 as
one half of a V128. Floating-point operations leave the other half of
a V128 in an unpredictable state, so it's no longer the case that writing
to an FP32 leaves the bits of the underlying register (the V128) alone.
I'd prefer to have separate subreg_ names for this situation, so that
it's obvious at a glance whether we're talking about a subreg that leaves
the other parts of the register alone.
No behavioral change intended.
Patch originally by Richard Sandiford.
llvm-svn: 236433
...instead of a separate Requires for each one. This style was already
used in some places and seems more compact.
No behavioral change intended.
llvm-svn: 204452
Use subreg_hNN and subreg_lNN for the high and low NN bits of a register.
List the low registers first, so that subreg_l32 also means the low 32
bits of a 128-bit register.
Floats are stored in the upper 32 bits of a 64-bit register, so they
should use subreg_h32 rather than subreg_l32.
No behavioral change intended.
llvm-svn: 191659
The architecture has many comparison instructions, including some that
extend one of the operands. The signed comparison instructions use sign
extensions and the unsigned comparison instructions use zero extensions.
In cases where we had a free choice between signed or unsigned comparisons,
we were trying to decide at lowering time which would best fit the available
instructions, taking things like extension type into account. The code
to do that was getting increasingly hairy and was also making some bad
decisions. E.g. when comparing the result of two LLCs, it is better to use
CR rather than CLR, since CR can be fused with a branch while CLR can't.
This patch removes the lowering code and instead adds an operand to
integer comparisons to say whether signed comparison is required,
whether unsigned comparison is required, or whether either is OK.
We can then leave the choice of instruction up to the normal isel code.
llvm-svn: 190138
Lengths up to a certain threshold (currently 6 * 256) use a series of MVCs.
Lengths above that threshold use a loop to handle X*256 bytes followed
by a single MVC to handle the excess (if any). This loop will also be
needed in future when support for variable lengths is added.
Because the same tablegen classes are used to define MVC and CLC,
the patch also has the side-effect of defining a pseudo loop instruction
for CLC. That instruction isn't used yet (and wouldn't be handled correctly
if it were). I'm planning to use it soon though.
llvm-svn: 189331
This follows the same lines as the integer code. In the end it seemed
easier to have a second 4-bit mask in TSFlags to specify the compare-like
CC values. That eats one more TSFlags bit than adding a CCHasUnordered
would have done, but it feels more concise.
llvm-svn: 187883
Look for patterns of the form (store (load ...), ...) in which the two
locations are known not to partially overlap. (Identical locations are OK.)
These sequences are better implemented by MVC unless either the load or
the store could use RELATIVE LONG instructions.
The testcase showed that we weren't using LHRL and LGHRL for extload16,
only sextloadi16. The patch fixes that too.
llvm-svn: 185919
Add a mapping from register-based <INSN>R instructions to the corresponding
memory-based <INSN>. Use it to cut down on the number of spill loads.
Some instructions extend their operands from smaller fields, so this
required a new TSFlags field to say how big the unextended operand is.
This optimisation doesn't trigger for C(G)R and CL(G)R because in practice
we always combine those instructions with a branch. Adding a test for every
other case probably seems excessive, but it did catch a missed optimisation
for DSGF (fixed in r185435).
llvm-svn: 185529
Add pseudo conditional store instructions, so that we use:
branch foo:
store
foo:
instead of:
load
branch foo:
move
foo:
store
z196 has real 32-bit and 64-bit conditional stores, but we don't use
any z196 instructions yet.
llvm-svn: 185065
Addresses a review comment from Ulrich Weigand. No functional change intended.
I'm not sure whether the old TODO that this patch touches still holds,
but that's something we'd get to when adding a targetted scheduling
description.
llvm-svn: 182474
The SystemZ port currently relies on the order of the instruction operands
matching the order of the instruction field lists. This isn't desirable
for disassembly, where the two are matched only by name. E.g. the R1 and R2
fields of an RR instruction should have corresponding R1 and R2 operands.
The main complication is that addresses are compound operands,
and as far as I know there is no mechanism to allow individual
suboperands to be selected by name in "let Inst{...} = ..." assignments.
Luckily it doesn't really matter though. The SystemZ instruction
encoding groups all address fields together in a predictable order,
so it's just as valid to see the entire compound address operand as
a single field. That's the approach taken in this patch.
Matching by name in turn means that the operands to COPY SIGN and
CONVERT TO FIXED instructions can be given in natural order.
(It was easier to do this at the same time as the rename,
since otherwise the intermediate step was too confusing.)
No functional change intended.
llvm-svn: 181769
This adds the actual lib/Target/SystemZ target files necessary to
implement the SystemZ target. Note that at this point, the target
cannot yet be built since the configure bits are missing. Those
will be provided shortly by a follow-on patch.
This version of the patch incorporates feedback from reviews by
Chris Lattner and Anton Korobeynikov. Thanks to all reviewers!
Patch by Richard Sandiford.
llvm-svn: 181203
Ulrich Weigand