This patch fixes various issues with our prior `declare target` handling
and extends it to support `omp begin declare target` as well.
This started with PR49649 in mind, trying to provide a way for users to
avoid the "ref" global use introduced for globals with internal linkage.
From there it went down the rabbit hole, e.g., all variables, even
`nohost` ones, were emitted into the device code so it was impossible to
determine if "ref" was needed late in the game (based on the name only).
To make it really useful, `begin declare target` was needed as it can
carry the `device_type`. Not emitting variables eagerly had a ripple
effect. Finally, the precedence of the (explicit) declare target list
items needed to be taken into account, that meant we cannot just look
for any declare target attribute to make a decision. This caused the
handling of functions to require fixup as well.
I tried to clean up things while I was at it, e.g., we should not "parse
declarations and defintions" as part of OpenMP parsing, this will always
break at some point. Instead, we keep track what region we are in and
act on definitions and declarations instead, this is what we do for
declare variant and other begin/end directives already.
Highlights:
- new diagnosis for restrictions specificed in the standard,
- delayed emission of globals not mentioned in an explicit
list of a declare target,
- omission of `nohost` globals on the host and `host` globals on the
device,
- no explicit parsing of declarations in-between `omp [begin] declare
variant` and the corresponding end anymore, regular parsing instead,
- precedence for explicit mentions in `declare target` lists over
implicit mentions in the declaration-definition-seq, and
- `omp allocate` declarations will now replace an earlier emitted
global, if necessary.
---
Notes:
The patch is larger than I hoped but it turns out that most changes do
on their own lead to "inconsistent states", which seem less desirable
overall.
After working through this I feel the standard should remove the
explicit declare target forms as the delayed emission is horrible.
That said, while we delay things anyway, it seems to me we check too
often for the current status even though that is often not sufficient to
act upon. There seems to be a lot of duplication that can probably be
trimmed down. Eagerly emitting some things seems pretty weak as an
argument to keep so much logic around.
---
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D101030
Update the SIMD builtin load functions to take pointers to const data and update
the intrinsics themselves to not cast away constness.
Differential Revision: https://reviews.llvm.org/D101884
Make the inputs to all narrowing builtins signed, which is how they are
interpreted by the underlying instructions (only the result changes sign
between instructions).
Differential Revision: https://reviews.llvm.org/D101883
Added __cl_clang_non_portable_kernel_param_types extension that
allows using non-portable types as kernel parameters. This allows
bypassing the portability guarantees from the restrictions specified
in C++ for OpenCL v1.0 s2.4.
Currently this only disables the restrictions related to the data
layout. The programmer should ensure the compiler generates the same
layout for host and device or otherwise the argument should only be
accessed on the device side. This extension could be extended to other
case (e.g. permitting size_t) if desired in the future.
Patch by olestrohm (Ole Strohm)!
https://reviews.llvm.org/D101168
GCC warning:
```
In file included from /llvm-project/clang/include/clang/Basic/LangOptions.h:22,
from /llvm-project/clang/include/clang/Frontend/CompilerInvocation.h:16,
from /llvm-project/clang/lib/Frontend/CompilerInvocation.cpp:9:
/llvm-project/clang/include/clang/Basic/TargetCXXABI.h: In static member function ‘static bool clang::TargetCXXABI::isSupportedCXXABI(const llvm::Triple&, clang::TargetCXXABI::Kind)’:
/llvm-project/clang/include/clang/Basic/TargetCXXABI.h:114:3: warning: control reaches end of non-void function [-Wreturn-type]
114 | };
| ^
```
This implements the flag proposed in RFC
http://lists.llvm.org/pipermail/cfe-dev/2020-August/066437.html.
The goal is to add a way to override the default target C++ ABI through a
compiler flag. This makes it easier to test and transition between different
C++ ABIs through compile flags rather than build flags.
In this patch:
- Store -fc++-abi= in a LangOpt. This isn't stored in a CodeGenOpt because
there are instances outside of codegen where Clang needs to know what the
ABI is (particularly through ASTContext::createCXXABI), and we should be
able to override the target default if the flag is provided at that point.
- Expose the existing ABIs in TargetCXXABI as values that can be passed
through this flag.
- Create a .def file for these ABIs to make it easier to check flag values.
- Add an error for diagnosing bad ABI flag values.
Differential Revision: https://reviews.llvm.org/D85802
The first crash reported in the bug report 44338.
Condition `!isSat.hasValue() || isNotSat.getValue()` here should be
`!isNotSat.hasValue() || isNotSat.getValue()`.
`getValue()` here crashed when we used the static analyzer to analyze
postgresql-12.0.
Patch By: OikawaKirie
Reviewed By: steakhal, martong
Differential Revision: https://reviews.llvm.org/D83660
Warn when a declaration uses an identifier that doesn't obey the reserved
identifier rule from C and/or C++.
Differential Revision: https://reviews.llvm.org/D93095
MSVC has added some new flags. Although they're not supported, this adds
parsing support for them so clang-cl doesn't treat them as filenames.
Except for /fsanitize=address which we do support. (clang-cl already
exposes the -fsanitize= option, but this allows using the
MSVC-spelling with a slash.)
Differential revision: https://reviews.llvm.org/D101439
This patch makes the builtin operand order match the C operand order
for all intrinsics. With this we can use clang_builtin_alias for
all overloaded intrinsics.
This should further reduce the test time for vector intrinsics.
Differential Revision: https://reviews.llvm.org/D101700
AMDGPU backend need to know whether floating point opcodes that support exception
flag gathering quiet and propagate signaling NaN inputs per IEEE754-2008, which is
conveyed by a function attribute "amdgpu-ieee". "amdgpu-ieee"="false" turns this off.
Without this function attribute backend assumes it is on for compute functions.
-mamdgpu-ieee and -mno-amdgpu-ieee are added to Clang to control this function attribute.
By default it is on. -mno-amdgpu-ieee requires -fno-honor-nans or equivalent.
Reviewed by: Matt Arsenault
Differential Revision: https://reviews.llvm.org/D77013
This adds the long overdue implementations of these functions
that have been part of the ABI document and are now part of
the "Power Vector Intrinsic Programming Reference" (PVIPR).
The approach is to add new builtins and to emit code with
the fast flag regardless of whether fastmath was specified
on the command line.
Differential revision: https://reviews.llvm.org/D101209
Use of bitcast resulted in lanes being swapped for vcreateq with big
endian. Fix this by using vreinterpret. No code change for little
endian. Adds IR lit test.
Differential Revision: https://reviews.llvm.org/D101606
Renaming the option is based on discussions in https://reviews.llvm.org/D101122.
It is normally not a good idea to rename driver flags but this flag is
new enough and obscure enough that it is very unlikely to have adopters.
While we're here also drop the `<kind>` metavar. It's not necessary and
is actually inconsistent with the documentation in
`clang/docs/ClangCommandLineReference.rst`.
Differential Revision: https://reviews.llvm.org/D101491
A need for such an option came up in a few libc++ reviews. That's because libc++ has both code in C++03 and newer standards.
Currently, it uses `Standard: C++03` setting for clang-format, but this breaks e.g. u8"string" literals.
Also, angle brackets are the only place where C++03-specific formatting needs to be applied.
Reviewed By: MyDeveloperDay, HazardyKnusperkeks
Differential Revision: https://reviews.llvm.org/D101344
The Neon vadd intrinsics were added to the ARMSIMD intrinsic map,
however due to being defined under an AArch64 guard in arm_neon.td,
were not previously useable on ARM. This change rectifies that.
It is important to note that poly128 is not valid on ARM, thus it was
extracted out of the original arm_neon.td definition and separated
for the sake of AArch64.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D100772
Reduces numbers of files built for clang-format from 575 to 449.
Requires two small changes:
1. Don't use llvm::ExceptionHandling in LangOptions. This isn't
even quite the right type since we don't use all of its values.
Tweaks the changes made in:
- https://reviews.llvm.org/D93215
- https://reviews.llvm.org/D93216
2. Move section name validation code added (long ago) in commit 30ba67439 out
of libBasic into Sema and base the check on the triple. This is a bit less
OOP-y, but completely in line with what we do in many other places in Sema.
No behavior change.
Differential Revision: https://reviews.llvm.org/D101463
This patch changes the AArch32 crypto instructions (sha2 and aes) to
require the specific sha2 or aes features. These features have
already been implemented and can be controlled through the command
line, but do not have the expected result (i.e. `+noaes` will not
disable aes instructions). The crypto feature retains its existing
meaning of both sha2 and aes.
Several small changes are included due to the knock-on effect this has:
- The AArch32 driver has been modified to ensure sha2/aes is correctly
set based on arch/cpu/fpu selection and feature ordering.
- Crypto extensions are permitted for AArch32 v8-R profile, but not
enabled by default.
- ACLE feature macros have been updated with the fine grained crypto
algorithms. These are also used by AArch64.
- Various tests updated due to the change in feature lists and macros.
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D99079
Language options are not available when a target is being created,
thus, a new method is introduced. Also, some refactoring is done,
such as removing OpenCL feature macros setting from TargetInfo.
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D101087
Reverts parts of https://reviews.llvm.org/D17183, but keeps the
resetDataLayout() API and adds an assert that checks that datalayout string and
user label prefix are in sync.
Approach 1 in https://reviews.llvm.org/D17183#2653279
Reduces number of TUs build for 'clang-format' from 689 to 575.
I also implemented approach 2 in D100764. If someone feels motivated
to make us use DataLayout more, it's easy to revert this change here
and go with D100764 instead. I don't plan on doing more work in this
area though, so I prefer going with the smaller, more self-consistent change.
Differential Revision: https://reviews.llvm.org/D100776
This is useful in runtimes build for example which currently try to
guess the correct triple where to place libraries in the multiarch
layout. Using this flag, the build system can get the correct triple
directly by querying Clang.
Differential Revision: https://reviews.llvm.org/D101400
GCC supports negative values for -mstack-protector-guard-offset=, this
should be a signed value. Pre-req to D100919.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101325
Different platforms use different rules for multiarch triples so
it's difficult to provide a single method for all platforms. We
instead move the getMultiarchTriple to the ToolChain class and let
individual platforms override it and provide their custom logic.
Differential Revision: https://reviews.llvm.org/D101194
Commit e3d8ee35e4 ("reland "[DebugInfo] Support to emit debugInfo
for extern variables"") added support to emit debugInfo for
extern variables if requested by the target. Currently, only
BPF target enables this feature by default.
As BPF ecosystem grows, callback function started to get
support, e.g., recently bpf_for_each_map_elem() is introduced
(https://lwn.net/Articles/846504/) with a callback function as an
argument. In the future we may have something like below as
a demonstration of use case :
extern int do_work(int);
long bpf_helper(void *callback_fn, void *callback_ctx, ...);
long prog_main() {
struct { ... } ctx = { ... };
return bpf_helper(&do_work, &ctx, ...);
}
Basically bpf helper may have a callback function and the
callback function is defined in another file or in the kernel.
In this case, we would like to know the debuginfo types for
do_work(), so the verifier can proper verify the safety of
bpf_helper() call.
For the following example,
extern int do_work(int);
long bpf_helper(void *callback_fn);
long prog() {
return bpf_helper(&do_work);
}
Currently, there is no debuginfo generated for extern function do_work().
In the IR, we have,
...
define dso_local i64 @prog() local_unnamed_addr #0 !dbg !7 {
entry:
%call = tail call i64 @bpf_helper(i8* bitcast (i32 (i32)* @do_work to i8*)) #2, !dbg !11
ret i64 %call, !dbg !12
}
...
declare dso_local i32 @do_work(i32) #1
...
This patch added support for the above callback function use case, and
the generated IR looks like below:
...
declare !dbg !17 dso_local i32 @do_work(i32) #1
...
!17 = !DISubprogram(name: "do_work", scope: !1, file: !1, line: 1, type: !18, flags: DIFlagPrototyped, spFlags: DISPFlagOptimized, retainedNodes: !2)
!18 = !DISubroutineType(types: !19)
!19 = !{!20, !20}
!20 = !DIBasicType(name: "int", size: 32, encoding: DW_ATE_signed)
The TargetInfo.allowDebugInfoForExternalVar is renamed to
TargetInfo.allowDebugInfoForExternalRef as now it guards
both extern variable and extern function debuginfo generation.
Differential Revision: https://reviews.llvm.org/D100567
These are intended to mimic warnings available in gcc.
-Wunused-but-set-variable is triggered in the case of a variable which
appears on the LHS of an assignment but not otherwise used.
For instance:
void f() {
int x;
x = 0;
}
-Wunused-but-set-parameter works similarly, but for function parameters
instead of variables.
In C++, they are triggered only for scalar types; otherwise, they are
triggered for all types. This is gcc's behavior.
-Wunused-but-set-parameter is controlled by -Wextra, while
-Wunused-but-set-variable is controlled by -Wunused. This is slightly
different from gcc's behavior, but seems most consistent with clang's
behavior for -Wunused-parameter and -Wunused-variable.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D100581
Default address space (applies when no explicit address space was
specified) maps to generic (4) address space.
Added SYCL named address spaces `sycl_global`, `sycl_local` and
`sycl_private` defined as sub-sets of the default address space.
Static variables without address space now reside in global address
space when compile for SPIR target, unless they have an explicit address
space qualifier in source code.
Differential Revision: https://reviews.llvm.org/D89909
Add option to `clang-scan-deps` to enable/disable generation of command-line arguments with absolute paths. This is essentially a revert of D100533, but with improved naming and added test.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D101051
Paul C. Anagnostopoulos