Narrowing vector binops came up in the demanded bits discussion in D52912.
I don't think we're going to be able to do this transform in IR as a canonicalization
because of the risk of creating unsupported widths for vector ops, but we already have
a DAG TLI hook to allow what I was hoping for: isExtractSubvectorCheap(). This is
currently enabled for x86, ARM, and AArch64 (although only x86 has existing regression
test diffs).
This is artificially limited to not look through bitcasts because there are so many
test diffs already, but that's marked with a TODO and is a small follow-up.
Differential Revision: https://reviews.llvm.org/D53784
llvm-svn: 345602
Summary:
I've noticed that the bitcasts we introduce for these make computeKnownBits and computeNumSignBits not work well in LegalizeVectorOps. LegalizeVectorOps legalizes bottom up while LegalizeDAG legalizes top down. The bottom up strategy for LegalizeVectorOps means operands are legalized before their uses. So we promote and/or/xor before we legalize the operands that use them making computeKnownBits/computeNumSignBits in places like LowerTruncate suboptimal. I looked at changing LegalizeVectorOps to be top down as well, but that was more disruptive and caused some regressions. I also looked at just moving promotion of binops to LegalizeDAG, but that had a few issues one around matching AND,ANDN,OR into VSELECT because I had to create ANDN as vXi64, but the other nodes hadn't legalized yet, I didn't look too hard at fixing that.
This patch seems to produce better results overall than my other attempts. We now form broadcasts of constants better in some cases. For at least some of them the AND was being introduced in LegalizeDAG, promoted to vXi64, and the BUILD_VECTOR was also legalized there. I think we got bad ordering of that. Now the promotion is out of the legalizer so we handle this better.
In the longer term I think we really should evaluate whether we should be doing this promotion at all. It's really there to reduce isel pattern count, but I'm wondering if we'd be better served just eating the pattern cost or doing C++ based isel for vector and/or/xor in X86ISelDAGToDAG. The masked and/or/xor will definitely be difficult in patterns if a bitcast gets between the vselect and the and/or/xor node. That becomes a lot of permutations to cover.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53107
llvm-svn: 344487
Enable enableMultipleCopyHints() on X86.
Original Patch by @jonpa:
While enabling the mischeduler for SystemZ, it was discovered that for some reason a test needed one extra seemingly needless COPY (test/CodeGen/SystemZ/call-03.ll). The handling for that is resulted in this patch, which improves the register coalescing by providing not just one copy hint, but a sorted list of copy hints. On SystemZ, this gives ~12500 less register moves on SPEC, as well as marginally less spilling.
Instead of improving just the SystemZ backend, the improvement has been implemented in common-code (calculateSpillWeightAndHint(). This gives a lot of test failures, but since this should be a general improvement I hope that the involved targets will help and review the test updates.
Differential Revision: https://reviews.llvm.org/D38128
llvm-svn: 342578
AVX512 doesn't have an immediate controlled blend instruction. But blend throughput is still better than movss/sd on SKX.
This commit changes AVX512 to use the AVX blend instructions instead of MOVSS/MOVSD. This constrains the register allocation since it won't be able to use XMM16-31, but hopefully the increased throughput and reduced port 5 pressure makes up for that.
llvm-svn: 337083
This teaches tryToFoldExtOfLoad to set the right location on a
newly-created extload. With that in place, the logic for performing a
certain ([s|z]ext (load ...)) combine becomes identical for sexts and
zexts, and we can get rid of one copy of the logic.
The test case churn is due to dependencies on IROrders inherited from
the wrong SDLoc.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46158
llvm-svn: 332118
This supports things like
(setcc ugt X, 0) -> (setcc ne X, 0)
I've restricted to only make changes to vectors before legalize ops because I doubt all targets have accurate condition code legality information for vectors given how little we did before.
Differential Revision: https://reviews.llvm.org/D42948
llvm-svn: 326495
This allows us to avoid an opsize prefix. And forcing some move immediates to i32 avoids a length changing prefix on those instructions.
This mostly replaces the existing combine we had for zext/sext+cmov of constants. I left in a case for sign extending a 32 bit cmov of constants to 64 bits.
Differential Revision: https://reviews.llvm.org/D43327
llvm-svn: 325601
Summary:
Currently we only use min/max to help with ule/uge compares because it removes an invert of the result that would otherwise be needed. But we can also use it for ult/ugt compares if it will prevent the need for a sign bit flip needed to use pcmpgt at the cost of requiring an invert after the compare.
I also refactored the code so that the max/min code is self contained and does its own return instead of setting up a flag to manipulate the rest of the function's behavior.
Most of the test cases look ok with this. I did notice that we added instructions when one of the operands being sign flipped is a constant vector that we were able to constant fold the flip into.
I also noticed that sometimes the SSE min/max clobbers a register that is needed after the compare. This resulted in an extra move being inserted before the min/max to preserve the register. We could try to detect this and switch from min to max and change the compare operands to use the operand that gets reused in the compare.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42935
llvm-svn: 324842
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
The existing code was already doing something very similar to subvector insertion so this allows us to remove the nearly duplicate code.
This patch is a little larger than it should be due to differences between the DQI handling between the two today.
llvm-svn: 323212
Summary:
For the most part its better to keep v32i1 as a mask type of a narrower width than trying to promote it to a ymm register.
I had to add some overrides to the methods that get the types for the calling convention so that we still use v32i8 for argument/return purposes.
There are still some regressions in here. I definitely saw some around shuffles. I think we probably should move vXi1 shuffle from lowering to a DAG combine where I think the extend and truncate we have to emit would be better combined.
I think we also need a DAG combine to remove trunc from (extract_vector_elt (trunc))
Overall this removes something like 13000 CHECK lines from lit tests.
Reviewers: zvi, RKSimon, delena, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42031
llvm-svn: 323201
Summary:
There are few oddities that occur due to v1i1, v8i1, v16i1 being legal without v2i1 and v4i1 being legal when we don't have VLX. Particularly during legalization of v2i32/v4i32/v2i64/v4i64 masked gather/scatter/load/store. We end up promoting the mask argument to these during type legalization and then have to widen the promoted type to v8iX/v16iX and truncate it to get the element size back down to v8i1/v16i1 to use a 512-bit operation. Since need to fill the upper bits of the mask we have to fill with 0s at the promoted type.
It would be better if we could just have the v2i1/v4i1 types as legal so they don't undergo any promotion. Then we can just widen with 0s directly in a k register. There are no real v4i1/v2i1 instructions anyway. Everything is done on a larger register anyway.
This also fixes an issue that we couldn't implement a masked vextractf32x4 from zmm to xmm properly.
We now have to support widening more compares to 512-bit to get a mask result out so new tablegen patterns got added.
I had to hack the legalizer for widening the operand of a setcc a bit so it didn't try create a setcc returning v4i32, extract from it, then try to promote it using a sign extend to v2i1. Now we create the setcc with v4i1 if the original setcc's result type is v2i1. Then extract that and don't sign extend it at all.
There's definitely room for improvement with some follow up patches.
Reviewers: RKSimon, zvi, guyblank
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41560
llvm-svn: 321967
This seems to improve X86's ability to match this into an address computation. Otherwise the other operand gets assigned to the base register and the stack pointer + frame index ends up in the index register. But index registers can't encode ESP/RSP so we end up having to move it into another register to meet the constraint.
I could try to improve the address matcher in X86, but swapping the producer seemed easier. Several other places already have the operands in this order so this is at least consistent.
llvm-svn: 321370
Despite what the comment said there isn't better codegen for 512-bit vectors. The 128/256/512 bit implementation jus stores to memory and loads an element. There's no advantage to doing that with a larger size. In fact in many cases it causes a stack realignment and generates worse code.
llvm-svn: 321369
Summary:
Currently we don't handle v32i1/v64i1 insert_vector_elt correctly as we fail to look at the number of elements closely and assume it can only be v16i1 or v8i1.
We also can't type legalize v64i1 insert_vector_elt correctly on KNL due to the type not being byte addressable as required by the legalizing through memory accesses path requires.
For the first issue, the patch now tries to pick a 512-bit register with the correct number of elements and promotes to that.
For the second issue, we now extend the vector to a byte addressable type, do the stores to memory, load the two halves, and then truncate the halves back to the original type. Technically since we changed the type, we may not need two loads, but actually checking that is more work and for the v64i1 case we do need them.
Reviewers: RKSimon, delena, spatel, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40942
llvm-svn: 320849
This doesn't match the semantics of the extract_vector_elt operation. Nothing downstream knows the bits were zeroed so they still get masked or sign extended after the extrat anyway.
llvm-svn: 320723
We previously only supported inserting to the LSB or MSB where it was easy to zero to perform an OR to insert.
This change effectively extracts the old value and the new value, xors them together and then xors that single bit with the correct location in the original vector. This will cancel out the old value in the first xor leaving the new value in the position.
The way I've implemented this uses 3 shifts and two xors and uses an additional register. We can avoid the additional register at the cost of another shift.
llvm-svn: 320120
There's no v2i1 or v4i1 kshift, and v8i1 is only supported with AVXDQ. Isel has fake patterns to extend these types to native shifts, but makes no guarantees about the value of any bits shifted in when shifting right.
This patch promotes the vector to a type that supports a native shift first and only allows inserting into the msb of a native sized shift.
I've constructed this in a way that doesn't do the promotion if we're going to fallback to using a xmm/ymm/zmm shuffle. I think I have a plan to remove the shuffle fall back entirely. In which case we this can be simplified, but I wanted to fix the correctness issue first.
llvm-svn: 320081
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
The pass scans the function to find instruction chains that define
registers in the same domain (closures).
It then calculates the cost of converting the closure to another domain.
If found profitable, the instructions are converted to instructions in
the other domain and the register classes are changed accordingly.
This commit adds the pass infrastructure and a simple conversion from
the GPR domain to the Mask domain.
Differential Revision:
https://reviews.llvm.org/D37251
Change-Id: Ic2cf1d76598110401168326d411128ae2580a604
llvm-svn: 316288
Summary:
This suppresses the generation of .Lcfi labels in our textual assembler.
It was annoying that this generated cascading .Lcfi labels:
llc foo.ll -o - | llvm-mc | llvm-mc
After three trips through MCAsmStreamer, we'd have three labels in the
output when none are necessary. We should only bother creating the
labels and frame data when making a real object file.
This supercedes D38605, which moved the entire .seh_ implementation into
MCObjectStreamer.
This has the advantage that we do more checking when emitting textual
assembly, as a minor efficiency cost. Outputting textual assembly is not
performance critical, so this shouldn't matter.
Reviewers: majnemer, MatzeB
Subscribers: qcolombet, nemanjai, javed.absar, eraman, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D38638
llvm-svn: 315259
Previously we were using one of the subvector indices twice. The included test case causes an assert without this change.
Thanks to Simon Pilgrim for catching this.
llvm-svn: 314429
NFC.
Updated 8 regression tests to use -mattr instead of -mcpu flag as follows:
-mcpu=knl --> -mattr=+avx512f
-mcpu=skx --> -mattr=+avx512f,+avx512bw,+avx512vl,+avx512dq
The updates are as part of the preparation of a large commit to add all instruction scheduling for the SKX target.
Reviewers: delena, zvi, RKSimon
Differential Revision: https://reviews.llvm.org/D38222
Change-Id: I2381c9b5bb75ecacfca017243c22d054f6eddd14
llvm-svn: 314306
This enables the use of a smaller encoding by using a VEX instruction when possible.
Differential Revision: https://reviews.llvm.org/D37092
llvm-svn: 312100
This patch completely replaces the instruction scheduling information for the Haswell architecture target by modifying the file X86SchedHaswell.td located under the X86 Target.
We used the scheduling information retrieved from the Haswell architects in order to replace and modify the existing scheduling.
The patch continues the scheduling replacement effort started with the SNB target in r307529 and r310792.
Information includes latency, number of micro-Ops and used ports by each HSW instruction.
Please expect some performance fluctuations due to code alignment effects.
Reviewers: RKSimon, zvi, aymanmus, craig.topper, m_zuckerman, igorb, dim, chandlerc, aaboud
Differential Revision: https://reviews.llvm.org/D36663
llvm-svn: 311879
There's no reason to switch instructions with and without DQI. It just creates extra isel patterns and test divergences.
There is however value in enabling the masked version of the instructions with DQI.
This required introducing some new multiclasses to enabling this splitting.
Differential Revision: https://reviews.llvm.org/D36661
llvm-svn: 311091
`llc -march` is problematic because it only switches the target
architecture, but leaves the operating system unchanged. This
occasionally leads to indeterministic tests because the OS from
LLVM_DEFAULT_TARGET_TRIPLE is used.
However we can simply always use `llc -mtriple` instead. This changes
all the tests to do this to avoid people using -march when they copy and
paste parts of tests.
See also the discussion in https://reviews.llvm.org/D35287
llvm-svn: 309774
We were already using the 32 bit element opcode if BWI isn't enabled, but there's no reason to change opcode if we have BWI. We will still use the 8/16 opcodes for masked stores though.
This allows us to use the aligned opcode when we can which makes our test output more consistent between different modes. It also reduces the number of isel patterns we need.
This is a slight inconsistency with loads which default to 64 bit element opcodes. I'll probably rectify that in a future patch.
Differential Revision: https://reviews.llvm.org/D35978
llvm-svn: 309693
These were taking priority over the aligned load instructions since there is no vmovda8/16. I don't think there is really a difference between aligned and unaligned on newer cpus so I don't think it matters which instructions we use.
But with this change we reduce the size of the isel table a little and we allow the aligned information to pass through to the evex->vec pass and produce the same output has avx/avx2 in some cases.
I also generally dislike patterns rooted in a bitcast which these were.
Differential Revision: https://reviews.llvm.org/D35977
llvm-svn: 309589
This is NFC after rerunning the "update_llc_test_checks.py" tool on the CodeGen X86 tests in order to submit a patch.
Minor differences due to added "End of Function" lines.
Reviewers: zvi
Differential Revision: https://reviews.llvm.org/D34933
llvm-svn: 306973
•static latency
•number of uOps from which the instructions consists
•all ports used by the instruction
Reviewers:
RKSimon
zvi
aymanmus
m_zuckerman
Differential Revision: https://reviews.llvm.org/D33897
llvm-svn: 306414
This patch defines the i1 type as illegal in the X86 backend for AVX512.
For DAG operations on <N x i1> types (build vector, extract vector element, ...) i8 is used, and should be truncated/extended.
This should produce better scalar code for i1 types since GPRs will be used instead of mask registers.
Differential Revision: https://reviews.llvm.org/D32273
llvm-svn: 303421
This will result in a KMOVW or KMOVD being emitted during register allocation. And in at least some cases this might allow the register coalescer to remove the copy all together.
llvm-svn: 298984
Sanjay Patel