This mostly entails adding relocations, however there are a couple of
changes to existing relocations:
1. R_AARCH64_NONE is defined to be zero rather than 256
R_AARCH64_NONE has been defined to be zero for a long time elsewhere
e.g. binutils and glibc since the submission of the AArch64 port in
2012 so this is required for compatibility.
2. R_AARCH64_TLSDESC_ADR_PAGE renamed to R_AARCH64_TLSDESC_ADR_PAGE21
I don't think there is any way for relocation names to leak out of LLVM
so this should not break anything.
Tested with check-all with no regressions.
llvm-svn: 222821
It printed out base relocation table header as table entry.
This patch also makes llvm-readobj to not skip ABSOLUTE entries
becuase it was confusing.
llvm-svn: 222299
We were a little lax in a few areas:
- We pretended that import libraries were like any old COFF file, they
are not. In fact, they aren't really COFF files at all, we should
probably grow some specialized functionality to handle them smarter.
- Our symbol iterators were more than happy to attempt to go past the
end of the symbol table if you had a symbol with a bad list of
auxiliary symbols.
llvm-svn: 222124
FYI, removed the unused MCInstrAnalysis as it does not exist for 64-bit ARM and
was causing a “couldn't initialize disassembler for target” error.
llvm-svn: 222045
Summary:
Teach llvm-symbolizer about PowerPC64 ELF function descriptors. Symbols in the .opd section point to function descriptors, the first word of which is a pointer to the real function. For the purposes of symbolizing we pretend that the symbol points directly to the function.
This is enough to get decent function names in stack traces for unoptimized binaries, which fixes the sanitizer print-stack-trace test on PowerPC64 Linux.
Reviewers: kcc, willschm, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6110
llvm-svn: 221514
add the code and test cases for 32-bit ARM symbolizer.
Also fixed the printing of data in code as it was not using the table correctly
and needed to fix one of the test cases too.
This will break lld’s test/mach-o/arm-interworking-movw.yaml till the tweak
for that is made. Which I’ll be committing immediately after this commit.
llvm-svn: 221470
Summary:
This patch extends the 'show' and 'merge' commands in llvm-profdata to handle
sample PGO formats. Using the 'merge' command it is now possible to convert
one sample PGO format to another.
The only format that is currently not working is 'gcc'. I still need to
implement support for it in lib/ProfileData.
The changes in the sample profile support classes are needed for the
merge operation.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6065
llvm-svn: 221032
The also-emit-llvm option only supported getting the IR before optimizations.
This patch replaces it with a more generic save-temps option that saves the IR
both before and after optimizations.
llvm-svn: 220885
For example, MS PSDK is not expected to have <cxxabi.h>.
You should introduce the new feature in lit.cfg corresponding to HAVE_CXXABI_H if you would like to test demangler.
llvm-svn: 220840
llvm-symbolizer will consult one of the .dSYM paths passed via -dsym-hint
if it fails to find the .dSYM bundle at the default location.
llvm-svn: 220004
The plugin API doesn't have the notion of linkonce, only weak. It is up to the
plugin to figure out if a symbol used only for the symbol table can be dropped.
In particular, it has to avoid dropping a linkonce_odr selected by gold if there
is also a weak_odr.
llvm-svn: 219188
The call to copyAttributesFrom will copy the visibility, which might assert
if it were to produce something invalid like "internal hidden". We avoid it
by first creating the replacement with the original linkage and then setting
it to internal affter the call to copyAttributesFrom.
llvm-svn: 219184
When creating an internal function replacement for use in an alias we were
not remapping the argument uses in the instructions to point to the new
arguments.
llvm-svn: 219177
Codeview line tables for functions in different sections refer to a common
STRING_TABLE_SUBSECTION for filenames.
This happens when building with -Gy or with inline functions with MSVC.
Original patch by Jeff Muizelaar!
llvm-svn: 219125
This patch defines a new iterator for the imported symbols.
Make a change to COFFDumper to use that iterator to print
out imported symbols and its ordinals.
llvm-svn: 218915
When the flag is given, the command prints out the COFF import table.
Currently only the import table directory will be printed.
I'm going to make another patch to print out the imported symbols.
The implementation of import directory entry iterator in
COFFObjectFile.cpp was buggy. This patch fixes that too.
http://reviews.llvm.org/D5569
llvm-svn: 218891
This commit adds a test which checks that the functions defined in header files will get associated with the header files rather than the source files in the reports.
Differential Revision: http://reviews.llvm.org/D5489
llvm-svn: 218673
This commit fixes llvm-cov's function coverage metric by using the number of executed functions instead of the number of fully covered functions.
Differential Revision: http://reviews.llvm.org/D5196
llvm-svn: 218672
So in fully linked images when a call is made through a stub it now gets a
comment like the following in the disassembly:
callq 0x100000f6c ## symbol stub for: _printf
indicating the call is to a symbol stub and which symbol it is for. This is
done for branch reference types and seeing if the branch target is in a stub
section and if so using the indirect symbol table entry for that stub and
using that symbol table entries symbol name.
llvm-svn: 218546
If we have multiple coverage counts for the same segment, we need to
add them up rather than arbitrarily choosing one. This fixes that and
adds a test with template instantiations to exercise it.
llvm-svn: 218432
get the literal string “Hello world” printed as a comment on the instruction
that loads the pointer to it. For now this is just for x86_64. So for object
files with relocation entries it produces things like:
leaq L_.str(%rip), %rax ## literal pool for: "Hello world\n"
and similar for fully linked images like executables:
leaq 0x4f(%rip), %rax ## literal pool for: "Hello world\n"
Also to allow testing against darwin’s otool(1), I hooked up the existing
-no-show-raw-insn option to the Mach-O parser code, added the new Mach-O
only -full-leading-addr option to match otool(1)'s printing of addresses and
also added the new -print-imm-hex option.
llvm-svn: 218423
For biendian targets like ARM and AArch64, it is useful to have the
output of the llvm-dwarfdump and llvm-objdump report the endianness
used when the object files were generated.
Patch by Charlie Turner.
llvm-svn: 218408
This change fixes the ARM and AArch64 relocation visitors in
RelocVisitor. They were unconditionally assuming the object data are
little-endian. Tests have been added to ensure that the
llvm-dwarfdump utility does not crash when processing big-endian
object files.
Patch by Charlie Turner.
llvm-svn: 218407
For biendian targets like ARM and AArch64, it is useful to have the
output of the llvm-dwarfdump and llvm-objdump report the endianness
used when the object files were generated.
Patch by Charlie Turner.
llvm-svn: 218391
This change fixes the ARM and AArch64 relocation visitors in
RelocVisitor. They were unconditionally assuming the object data are
little-endian. Tests have been added to ensure that the
llvm-dwarfdump utility does not crash when processing big-endian
object files.
Patch by Charlie Turner.
llvm-svn: 218389
This format is simply a regular object file with the bitcode stored in a
section named ".llvmbc", plus any number of other (non-allocated) sections.
One immediate use case for this is to accommodate compilation processes
which expect the object file to contain metadata in non-allocated sections,
such as the ".go_export" section used by some Go compilers [1], although I
imagine that in the future we could consider compiling parts of the module
(such as large non-inlinable functions) directly into the object file to
improve LTO efficiency.
[1] http://golang.org/doc/install/gccgo#Imports
Differential Revision: http://reviews.llvm.org/D4371
llvm-svn: 218078
First step done in this commit is to get flush out enough of the
SymbolizerGetOpInfo() routine to symbolic an X86_64 hello world .o and
its loading of the literal string and call to printf. Also the code to
symbolicate the X86_64_RELOC_SUBTRACTOR relocation and a test is also
added to show a slightly more complicated case.
Next will be to flush out enough of SymbolizerSymbolLookUp() to get the
literal string “Hello world” printed as a comment on the instruction that load
the pointer to it.
llvm-svn: 217893
Teach yaml2obj how to make a bigobj COFF file. Like the rest of LLVM,
we automatically decide whether or not to use regular COFF or bigobj
COFF on the fly depending on how many sections the resulting object
would have.
This ends the task of adding bigobj support to LLVM.
N.B. This was tested by forcing yaml2obj to be used in bigobj mode
regardless of the number of sections. While a dedicated test was
written, the smallest I could make it was 36 MB (!) of yaml and it still
took a significant amount of time to execute on a powerful machine.
llvm-svn: 217858
This finishes the ability of llvm-objdump to print out all information from
the LC_DYLD_INFO load command.
The -bind option prints out symbolic references that dyld must resolve
immediately.
The -lazy-bind option prints out symbolc reference that are lazily resolved on
first use.
The -weak-bind option prints out information about symbols which dyld must
try to coalesce across images.
llvm-svn: 217853
This changes the debug output of the llvm-cov tool to consistently
write to stderr, and moves the highlighting output closer to where
it's relevant.
llvm-svn: 217838
In r217746, though it was supposed to be NFC, I broke llvm-cov's
handling of showing regions without showing counts. This should've
shown up in the existing tests, except they were checking debug output
that was displayed regardless of what was actually output. I've moved
the relevant debug output to a more appropriate place so that the
tests catch this kind of thing.
llvm-svn: 217835
Similar to my previous -exports-trie option, the -rebase option dumps info from
the LC_DYLD_INFO load command. The rebasing info is a list of the the locations
that dyld needs to adjust if a mach-o image is not loaded at its preferred
address. Since ASLR is now the default, images almost never load at their
preferred address, and thus need to be rebased by dyld.
llvm-svn: 217709
The raw profiles that are generated in compiler-rt always add padding
so that each profile is aligned, so we can simply treat files that
don't have this property as malformed.
Caught by Alexey's new ubsan bot. Thanks!
llvm-svn: 217708
This fixes a call to sys::fs::equivalent that should've been to
CodeCoverageTool::equivalentFiles, which lets us restore the test of
r217476 that was removed in r217478.
This reverts r217478, but the test works this time.
llvm-svn: 217646
This adds support for reading the "bigobj" variant of COFF produced by
cl's /bigobj and mingw's -mbig-obj.
The most significant difference that bigobj brings is more than 2**16
sections to COFF.
bigobj brings a few interesting differences with it:
- It doesn't have a Characteristics field in the file header.
- It doesn't have a SizeOfOptionalHeader field in the file header (it's
only used in executable files).
- Auxiliary symbol records have the same width as a symbol table entry.
Since symbol table entries are bigger, so are auxiliary symbol
records.
Write support will come soon.
Differential Revision: http://reviews.llvm.org/D5259
llvm-svn: 217496
It appears that the -filename-equivalence option for testing llvm-cov
doesn't work correctly with -show-expansions. I'm reverting this test
to get the bots green while I look into fixing that.
This partially reverts r217476
llvm-svn: 217478
This is the plugin version of pr20882.
This handles the case of every common symbol being in the IR. We will need some
support from gold to handle the case where some symbols are in ELF and some in
the IR.
llvm-svn: 217458
MachOObjectFile in lib/Object currently has no support for parsing the rebase,
binding, and export information from the LC_DYLD_INFO load command in final
linked mach-o images. This patch adds support for parsing the exports trie data
structure. It also adds an option to llvm-objdump to dump that export info.
I did the exports parsing first because it is the hardest. The information is
encoded in a trie structure, but the standard ObjectFile way to inspect content
is through iterators. So I needed to make an iterator that would do a
non-recursive walk through the trie and maintain the concatenation of edges
needed for the current string prefix.
I plan to add similar support in MachOObjectFile and llvm-objdump to
parse/display the rebasing and binding info too.
llvm-svn: 216808
There are two parts to this. First, the plugin needs to tell gold the comdat by
setting comdat_key.
What gets things a bit more complicated is that gold only seems
symbols. In particular, if A is an alias to B, it only sees the symbols
A and B. It can then ask us to keep symbol A but drop symbol B. What
we have to do instead is to create an internal version of B and make A
an alias to that.
At some point some of this logic should be moved to lib/Linker so that
we don't map a Constant to an internal version just to have lib/Linker
map that again to the destination module.
The reason for implementing this in tools/gold for now is simplicity.
With it in place it should be possible to update clang to use comdats
for constructors and destructors on ELF without breaking the LTO
bootstrap. Once that is done I intend to come back and improve the
interface lib/Linker exposes.
llvm-svn: 216302
This commit expands llvm-cov's functionality by adding support for a new code coverage
tool that uses LLVM's coverage mapping format and clang's instrumentation based profiling.
The gcov compatible tool can be invoked by supplying the 'gcov' command as the first argument,
or by modifying the tool's name to end with 'gcov'.
Differential Revision: http://reviews.llvm.org/D4445
llvm-svn: 216300
There is a fundamental difference between how the gold API and lib/LTO view
the LTO process.
The gold API talks about a particular symbol in a particular file. The lib/LTO
API talks about a symbol in the merged module.
The merged module is then defined in terms of the IR semantics. In particular,
a linkonce_odr GV is only copied if it is used, since it is valid to drop
unused linkonce_odr GVs.
In the testcase in pr19901 both properties collide. What happens is that gold
asks us to keep a particular linkonce_odr symbol, but the IR linker doesn't
copy it to the merged module and we never have a chance to ask lib/LTO to keep
it.
This patch fixes it by having a more direct implementation of the gold API. If
it asks us to keep a symbol, we change the linkage so it is not linkonce. If it
says we can drop a symbol, we do so. All of this before we even send the module
to lib/Linker.
Since now we don't have to produce LTO_SYMBOL_SCOPE_DEFAULT_CAN_BE_HIDDEN,
during symbol resolution we can use a temporary LLVMContext and do lazy
module loading. This allows us to keep the minimum possible amount of
allocated memory around. This should also allow as much parallelism as
we want, since there is no shared context.
llvm-svn: 216215
file with -macho, the Mach-O specific object file parser option.
After some discussion I chose to do this implementation contained in the logic
of llvm-objdump’s MachODump.cpp using a second disassembler for thumb when
needed and with updates mostly contained in the MachOObjectFile class.
llvm-svn: 215931
I initially thought I could implement COMDATs with aliases by just
internalizing GVs instead of dropping them. This is a counter
example: Internalizing one of the @a would make @b and @c point
to different variables.
llvm-svn: 215447
The timestamp meant these files changed with each invocation of
relocs.py, confusing matters when we add relocations and need to
update the tests.
llvm-svn: 215350
Also make the disassembler created with the Mach-O parser (the -m option)
pick up the Target specific attributes specified with -mattr option.
llvm-svn: 215032
This updates the instrumentation based profiling format so that when
we have multiple functions with the same name (but different function
hashes) we keep all of them instead of rejecting the later ones.
There are a number of scenarios where this can come up where it's more
useful to keep multiple function profiles:
* Name collisions in unrelated libraries that are profiled together.
* Multiple "main" functions from multiple tools built against a common
library.
* Combining profiles from different build configurations (ie, asserts
and no-asserts)
The profile format now stores the number of counters between the hash
and the counts themselves, so that multiple sets of counts can be
stored. Since this is backwards incompatible, I've bumped the format
version and added some trivial logic to skip this when reading the old
format.
llvm-svn: 214585
In some places we've been using different suffixes for the different
file formats involved in instrprof, but in others we've just
ambiguously used .profdata. Update the test files to indicate the
types of file more obviously.
No functional change.
llvm-svn: 214357
This moves some tests around to make it clearer what's being tested,
and adds very rudimentary comment syntax to the text input format to
make specifying this kind of test a little bit simpler.
llvm-svn: 214235
These are only used when the 'ld' in the path is gold and the plugin has
been built, but it is already a start to make sure we don't regress features
that cannot be tested with llvm-lto.
llvm-svn: 214058
This tool's job is to dump the vtables inside object files. It is
currently limited to MS ABI vf- and vb-tables but it will eventually
support Itanium-style v-tables as well.
Differential Revision: http://reviews.llvm.org/D4584
llvm-svn: 213903
The size of the uninitialized sections, like BSS, can exceed the size of
the object file.
Do not attempt to grab the contents of such sections.
llvm-svn: 212953
There were two issues here:
1. At the very least, scattered relocations cannot use the same code to
determine the corresponding symbol being referred to. For some reason we
pretend there is no symbol, even when one actually exists in the symtab, so to
match this behaviour getRelocationSymbol should simply return symbols_end for
scattered relocations.
2. Printing "-" when we can't get a symbol (including the scattered case, but
not exclusively), isn't that helpful. In both cases there *is* interesting
information in that field, so we should print it. As hex will do.
Small part of rdar://problem/17553104
llvm-svn: 212332
Make llvm-cov compatible with gcov for cases where multiple files are
specified on the command line. That is, loop over each one and report
coverage, and report errors on stderr only rather than via return
code.
llvm-svn: 211959
All tests in test/tools/llvm-cov fail on big-endian targets and are
supposed to be XFAILed there. However, including "powerpc64" in the
XFAIL line is now incorrect, since that matches both powerpc64- and
powerpc64le- targets, and the tests pass on the latter.
Update the XFAIL lines to use powerpc64- instead (like mips64-).
llvm-svn: 211172
Allow multiple raw profiles to coexist in a single .profraw file,
given the following conditions:
- Zero padding at the end of or between profiles will be skipped.
- Each profile must start with a valid header.
- Mixing endianness or pointer sizes in concatenated profiles files is
not allowed.
This is needed to handle cases where a program's shared libraries are
profiled as well as the main executable itself, as we'll need to emit
each executable's counters. Combining the tables in the runtime would
be expensive for the instrumented program.
rdar://16918688
llvm-svn: 208938
Tested by comparing make check VERBOSE=1 before and after to make sure
no tests are missed. (VERBOSE=1 prints the list of tests.)
Only one test :( remains where .cpp is required:
tools/llvm-cov/range_based_for.cpp:// RUN: llvm-cov range_based_for.cpp | FileCheck %s --check-prefix=STDOUT
The topic was discussed in this thread:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20140428/214905.html
llvm-svn: 208621
If the source files referenced by a gcno file are missing, gcov
outputs a coverage file where every line is simply /*EOF*/. This also
occurs for lines in the coverage that are past the end of a file that
is found.
This change mimics gcov.
llvm-svn: 208149
In gcov, there's a -n/--no-output option, which disables the writing
of any .gcov files, so that it emits only the summary info on stdout.
This implements the same behaviour in llvm-cov.
llvm-svn: 208148
Reading line tables in llvm-cov was pretty broken, but would happen to
work as long as no line in the table was 0. It's not clear to me
whether a line of zero *should* show up in these tables, but deciding
to read a string in the middle of the line table is certainly the
wrong thing to do if it does.
I've also added some comments, as trying to figure out what this block
of code was doing was fairly unpleasant.
llvm-svn: 207866
GCOV provides an option to prepend output file names with the source
file name, to disambiguate between covered data that's included from
multiple sources. Add a flag to llvm-cov that does the same.
llvm-svn: 207035
This adds support for an indexed instrumentation based profiling
format, which is just a small header and an on disk hash table. This
format will be used by clang's -fprofile-instr-use= for PGO.
llvm-svn: 206656
Once the auxiliary fields relating to the filename have been inspected, any
following auxiliary fields need not be visited as they have been consumed (the
following fields comprise the filepath as a single unit).
Adjust the test to catch this even if ASAN is not enabled.
llvm-svn: 206190
If a filename is a multiple of 18 characters, there will be no null-terminator.
This will result in an invalid access by the constructed StringRef. Add a test
case to exercise this and fix that handling. Address this same vulnerability in
llvm-readobj as well.
llvm-svn: 206145
Add support for file auxiliary symbol entries in COFF symbol tables. A COFF
symbol table with a FILE entry is followed by sizeof(__FILE__) / 18 auxiliary
symbol records which contain the filename. Read them and form the original
filename that the record contains. Then display the name in the output.
llvm-svn: 206126
Functions may in an instrumented binary but not in the original source
when they're inserted by the compiler or the runtime. These functions
aren't meaningful to the user, so teach llvm-cov to skip over them
instead of crashing.
llvm-svn: 204863
Since the profile can come from 32-bit machines, we need to check the
pointer size. Change the magic number to facilitate this.
Adds tests for reading 32-bit and 64-bit binaries (both big- and
little-endian). The tests write a binary using printf in RUN lines
(like raw-magic-but-no-header.test). Assuming the bots don't complain,
this seems like a better way forward for testing RawInstrProfReader than
committing binary files.
<rdar://problem/16400648>
llvm-svn: 204557
Some text shows up on stderr when using guard malloc, and this test
was trying to treat that as input to llvm-profdata show. There's no
reason to pipe stderr into show at all here.
llvm-svn: 204549
Cleanup the current binary testcase for profile data.
- Rename it to something more specific.
- Remove the text comparison.
- Check the output of llvm-profdata show.
llvm-svn: 204518
Read a raw binary profile that corresponds to a memory dump from the
runtime profile.
The test is a binary file generated from
cfe/trunk/test/Profile/c-general.c with the new compiler-rt runtime and
the matching text version of the input. It includes instructions on how
to regenerate.
<rdar://problem/15950346>
llvm-svn: 204496
This isn't a format we'll want to write out in practice, but moving it
to the writer library simplifies llvm-profdata and isolates it from
further changes to the format.
This also allows us to update the tests to not rely on the text output
format.
llvm-svn: 204489
This introduces the ProfileData library and updates llvm-profdata to
use this library for reading profiles. InstrProfReader is an abstract
base class that will be subclassed for both the raw instrprof data
from compiler-rt and the efficient instrprof format that will be used
for PGO.
llvm-svn: 204482
NumberOfRelocations field in COFF section table is only 16-bit wide. If an
object has more than 65535 relocations, the number of relocations is stored
to VirtualAddress field in the first relocation field, and a special flag
(IMAGE_SCN_LNK_NRELOC_OVFL) is set to Characteristics field.
In test we cheated a bit. I made up a test file so that it has
IMAGE_SCN_LNK_NRELOC_OVFL flag but the number of relocations is much smaller
than 65535. This is to avoid checking in a large test file just to test a
file with many relocations.
Differential Revision: http://llvm-reviews.chandlerc.com/D3139
llvm-svn: 204418
Chandler voiced some concern with checking this in without some
discussion first. Reverting for now.
This reverts r203703, r203704, r203708, and 203709.
llvm-svn: 203723
This replaces the llvm-profdata tool with a version that uses the
recently introduced Profile library. The new tool has the ability to
generate and summarize profdata files as well as merging them.
llvm-svn: 203704
Unwind info contents were indented at the same level as function table
contents. That's a bit confusing because the unwind info is pointed by
function table. In other places we usually increment indentation depth
by one when dereferncing a pointer.
This patch also removes extraneous newlines between function tables.
llvm-svn: 202879
The original code does not work correctly on executable files because the
code is written in such a way that only object files are assumed to be given
to llvm-objdump.
Contents of RuntimeFunction are different between executables and objects. In
executables, fields in RuntimeFunction have actual addresses to unwind info
structures. On the other hand, in object files, the fields have zero value,
but instead there are relocations pointing to the fields, so that Linker will
fill them at link-time.
So, when we are reading an object file, we need to use relocation info to
find the location of unwind info. When executable, we should just look at the
values in RuntimeFunction.
llvm-svn: 202785
COFF object files with 0 as string table size are currently rejected. This
prevents us from reading object files written by tools like cvtres that
violate the PECOFF spec and write 0 instead of 4 for the size of an empty
string table.
llvm-svn: 202292
boundaries.
It is possible to create an ELF executable where symbol from say .text
section 'points' to the address outside the section boundaries. It does
not have a sense to disassemble something outside the section.
Without this fix llvm-objdump prints finite or infinite (depends on
the executable file architecture) number of 'invalid instruction
encoding' warnings.
llvm-svn: 202083
Load Configuration Table may contain a pointer to SEH table. This patch is to
print the offset to the table. Printing SEH table contents is a TODO.
The layout of Layout Configuration Table is described in Microsoft PE/COFF
Object File Format Spec, but the table's offset/size descriptions seems to be
totally wrong, at least in revision 8.3 of the spec. I believe the table in
this patch is the correct one.
llvm-svn: 201638
In gcov, the -o flag can accept either a directory or a file name.
When given a directory, the gcda and gcno files are expected to be in
that directory. When given a file, the gcda and gcno files are
expected to be named based on the stem of that file. Non-existent
paths are treated as files.
This implements compatible behaviour.
llvm-svn: 201555
Introducing llvm-profdata, a tool for merging profile data generated by
PGO instrumentation in clang.
- The name indicates a file extension of <name>.profdata. Eventually
profile data output by clang should be changed to that extension.
- llvm-profdata merges two profiles. However, the name is more general,
since it will likely pick up more tasks (such as summarizing a single
profile).
- llvm-profdata parses the current text-based format, but will be
updated once we settle on a binary format.
<rdar://problem/15949645>
llvm-svn: 201535
Until now, when a path in a gcno file included a directory, we would
emit our .gcov file in that directory, whereas gcov always emits the
file in the current directory. In doing so, this implements gcov's
strange name-mangling -p flag, which is needed to avoid clobbering
files when two with the same name exist in different directories.
The path mangling is a bit ugly and only handles unix-like paths, but
it's simple, and it doesn't make any guesses as to how it should
behave outside of what gcov documents. If we decide this should be
cross platform later, we can consider the compatibility implications
then.
llvm-svn: 200754
When gcov is run without gcda data, it acts as if the counts are all
zero and labels the file as - to indicate that there was no data. We
should do the same.
llvm-svn: 200740
Enhance the ARM specific parsing support in llvm-readobj to support attributes.
This allows for simpler tests to validate encoding of the build attributes as
specified in the ARM ELF specification.
llvm-svn: 200450
Currently, llvm-cov isn't command-line compatible with gcov, which
accepts a source file name as its first parameter and infers the gcno
and gcda file names from that. This change keeps our -gcda and -gcno
options available for convenience in overriding this behaviour, but
adds the required parameter and inference behaviour as a compatible
default.
llvm-svn: 200417
That bit is not documented in the PE/COFF spec published by Microsoft, so we
don't know the official name of it. I named this bit
IMAGE_DLL_CHARACTERISTICS_HIGH_ENTROPY_VIRTUAL_ADDRESS because the bit is
reported as "high entropy virtual address" by dumpbin.exe,
llvm-svn: 200121
PE32+ supports 64 bit address space, but the file format remains 32 bit.
So its file format is pretty similar to PE32 (32 bit executable). The
differences compared to PE32 are (1) the lack of "BaseOfData" field and
(2) some of its data members are 64 bit.
In this patch, I added a new member function to get a PE32+ Header object to
COFFObjectFile class and made llvm-readobj to use it.
llvm-svn: 200117
Add support to llvm-readobj to decode the actual opcodes. The ARM EHABI opcodes
are a variable length instruction set that describe the operations required for
properly unwinding stack frames.
The primary motivation for this change is to ease the creation of tests for the
ARM EHABI object emission as well as the unwinding directive handling in the ARM
IAS.
Thanks to Logan Chien for an extra test case!
llvm-svn: 199708
This patch adds the capability to dump export table contents. An example
output is this:
Export Table:
Ordinal RVA Name
5 0x2008 exportfn1
6 0x2010 exportfn2
By adding this feature to llvm-objdump, we will be able to use it to check
export table contents in LLD's tests. Currently we are doing binary
comparison in the tests, which is fragile and not readable to humans.
llvm-svn: 199358
Rename bytecode to opcodes to make it more clear. Change an impossible case to
llvm_unreachable instead. Avoid allocation of a buffer by modifying the
PrintOpcodes iteration.
llvm-svn: 198848
Appease the buildbots for targets which do not build the ARM support by moving
the ARM specific test into a subdirectory and use the lit configuration to
disable them appropriately.
Thanks to chapuni and thakis for explaining how to do this!
llvm-svn: 198736
This adds some preliminary support for decoding ARM EHABI unwinding information.
The major functionality that remains from complete support is bytecode
translation.
Each Unwind Index Table is printed out as a separate entity along with its
section index, name, offset, and entries.
Each entry lists the function address, and if possible, the name, of the
function to which it corresponds. The encoding model, personality routine or
index, and byte code is also listed.
llvm-svn: 198734
Similar to the file summaries, the function summaries output line,
branching and call statistics. The file summaries have been moved
outside the initial loop so that all of the function summaries can be
outputted before file summaries.
Also updated test cases.
llvm-svn: 197633
File summaries will now be optionally outputted which will give line,
branching and call coverage info. Unfortunately, clang's current
instrumentation does not give enough information to deduce function
calls, something that gcc is able to do. Thus, no calls are always
outputted to be consistent with gcov output.
Also updated tests.
llvm-svn: 197606
Outputs branch information for unconditional branches in addition to
conditional branches. -b option must be enabled.
Also updated tests.
llvm-svn: 197432
This option tells llvm-cov to print out branch probabilities when
a basic block contains multiple branches. It also prints out some
function summary info including the number of times the function enters,
the percent of time it returns, and how many blocks were executed.
Also updated tests.
llvm-svn: 197198
Similar to gcov, llvm-cov will now print out the block count at the end
of each block. Multiple blocks can end on the same line.
One computational difference is by using -a, llvm-cov will no longer
simply add the block counts together to form a line count. Instead, it
will take the maximum of the block counts on that line. This has a
similar effect to what gcov does, but generates more correct counts in
certain scenarios.
Also updated tests.
llvm-svn: 196856
This currently breaks clang/test/CodeGen/code-coverage.c. The root cause
is that the newly introduced access to Funcs[j] is out of bounds.
llvm-svn: 196365
With r196184, llvm-cov creates a new file right next to the input file.
However, the Inputs-directory can't simply be assumed to be writable
under all build systems.
Also, this prevents a new source file from showing up in the source tree
if the test aborts before the call to "rm".
llvm-svn: 196228
Instead of asking the user to specify a single file to output coverage
info and defaulting to STDOUT, llvm-cov now creates files for each
source file with a naming system of: <source filename> + ".llcov".
This is what gcov does and although it can clutter the working directory
with numerous coverage files, it will be easier to hook the llvm-cov
output to tools which operate on this assumption (such as lcov).
llvm-svn: 196184
Instead of permanently outputting "MVLL" as the file checksum, clang
will create gcno and gcda checksums by hashing the destination block
numbers of every arc. This allows for llvm-cov to check if the two gcov
files are synchronized.
Regenerated the test files so they contain the checksum. Also added
negative test to ensure error when the checksums don't match.
llvm-svn: 195191
Summary:
Some machine-type-neutral object files containing only undefined symbols
actually do exist in the Windows standard library. Need to recognize them
as COFF files.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2164
llvm-svn: 194734
According to the hazy gcov documentation, it appeared to be technically
possible for lines within a block to belong to different source files.
However, upon further investigation, gcov does not actually support
multiple source files for a single block.
This change removes a level of separation between blocks and lines by
replacing the StringMap of GCOVLines with a SmallVector of ints
representing line numbers. This also means that the GCOVLines class is
no longer needed.
This paves the way for supporting the "-a" option, which will output
block information.
llvm-svn: 194637
Unified the interface for read functions. They all return a boolean
indicating if the read from file succeeded. Functions that previously
returned the read value now store it into a variable that is passed in
by reference instead. Callers will need to check the return value to
detect if an error occurred.
Also added a new test which ensures that no assertions occur when file
contains invalid data. llvm-cov should return with error code 1 upon
failure.
llvm-svn: 194635
This test compares the output of llvm-cov against a coverage file
generated by gcov. Currently, llvm-cov does not work on certain
platforms (namely big-endian architectures such as PowerPC, among
others). These platforms are marked as XFAIL for now, but will be fixed
later.
llvm-svn: 194616
This reverts commit r194451.
Not sure why the tests are failing on the buildbot. They run fine on my
local machine. Could it possibly be because of the endianness of the
architectures? The GCNO and GCDA files are little-endian encoded, and
llvm-cov expects it to remain that way. Is this a safe assumption?
llvm-svn: 194454
Will Newton