Summary:
getModRefInfo is meant to answer the question "what impact does this
instruction have on a given memory location" (not even another
instruction).
Long debate on this on IRC comes to the conclusion the answer should be "nothing special".
That is, a noalias volatile store does not affect a memory location
just by being volatile. Note: DSE and GVN and memdep currently
believe this, because memdep just goes behind AA's back after it says
"modref" right now.
see line 635 of memdep. Prior to this patch we would get modref there, then check aliasing,
and if it said noalias, we would continue.
getModRefInfo *already* has this same AA check, it just wasn't being used because volatile was
lumped in with ordering.
(I am separately testing whether this code in memdep is now dead except for the invariant load case)
Reviewers: jyknight, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31726
llvm-svn: 299741
Previously when dumping class definitions, there were only
two modes - on or off. But it's useful to sometimes get a
little more fine-grained. For example, you might only want
to see the record layout (for example to look for extraneous
padding). This patch adds a third mode, layout mode, which
does exactly that. Only this-relative data members are
displayed in this mode.
Differential Revision: https://reviews.llvm.org/D31794
llvm-svn: 299733
The new codepath has been in the tree for years, and there isn't any
reason to use two codepaths here.
Differential Revision: https://reviews.llvm.org/D30596
llvm-svn: 299723
This is possible in ways that are not compiler bugs,
so stop asserting on them.
This emits an extra error when emitting objects when it
can't encode the new pseudo, but I'm not sure that matters.
llvm-svn: 299712
Summary:
Particularly, with --delete, this can be very useful for testing
new optimizations on some hotspots, without having to run it on the whole
application. E.g. as such:
```
llvm-extract app.bc --recursive --rfunc .*hotspot.* > hotspot.bc
llvm-extract app.bc --recursive --delete --rfunc .*hotspot.* > residual.bc
llc -filetype=obj residual.bc > residual.o
llc -filetype=obj hotspot.bc > hotspot.o
cc -o app residual.o hotspot.o
```
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D31722
llvm-svn: 299706
In LowerMUL, the chain information is not preserved for the new
created Load SDNode.
For example, if a Store alias with one of the operand of Mul.
The Load for that operand need to be scheduled before the Store.
The dependence is recorded in the chain of Store, in TokenFactor.
However, when lowering MUL, the SDNodes for the new Loads for
VMULL are not updated in the TokenFactor for the Store. Thus the
chain is not preserved for the lowered VMULL.
llvm-svn: 299701
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
This is a re-land of r298158 rebased on D31358. This time,
asan.module_ctor is put in a comdat as well to avoid quadratic
behavior in Gold.
llvm-svn: 299697
When possible, put ASan ctor/dtor in comdat.
The only reason not to is global registration, which can be
TU-specific. This is not the case when there are no instrumented
globals. This is also limited to ELF targets, because MachO does
not have comdat, and COFF linkers may GC comdat constructors.
The benefit of this is a lot less __asan_init() calls: one per DSO
instead of one per TU. It's also necessary for the upcoming
gc-sections-for-globals change on Linux, where multiple references to
section start symbols trigger quadratic behaviour in gold linker.
This is a rebase of r298756.
llvm-svn: 299696
Create the constructor in the module pass.
This in needed for the GC-friendly globals change, where the constructor can be
put in a comdat in some cases, but we don't know about that in the function
pass.
This is a rebase of r298731 which was reverted due to a false alarm.
llvm-svn: 299695
Summary:
Prior to this while it would delete the dead DIGlobalVariables, it would
leave dead DICompileUnits and everything referenced therefrom. For a bit
bitcode file with thousands of compile units those dead nodes easily
outnumbered the real ones. Clean that up.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D31720
llvm-svn: 299692
memorydefs, not just stores. Along the way, we audit and fixup issues
about how we were tracking memory leaders, and improve the verifier
to notice more memory congruency issues.
llvm-svn: 299682
Summary:
Host CPU detection now supports Kryo, so we need to recognize it in ARM
target.
Reviewers: mcrosier, t.p.northover, rengolin, echristo, srhines
Reviewed By: t.p.northover, echristo
Subscribers: aemerson
Differential Revision: https://reviews.llvm.org/D31775
llvm-svn: 299674
If a workgroup size is known to be not greater than wavefront size
the s_barrier instruction is not needed since all threads are guarantied
to come to the same point at the same time.
Differential Revision: https://reviews.llvm.org/D31731
llvm-svn: 299659
During the optimisation of jump tables in the constant island pass,
an extra ADD could be left over, now dead but not removed.
Differential Revision: https://reviews.llvm.org/D31389
llvm-svn: 299634
Summary:
LSV wants to know the maximum size that can be loaded to a vector register.
On X86, this always matches the maximum register width. Implement this
accordingly and add a test to make sure that LSV can vectorize up to the
maximum permissible width on X86.
Reviewers: delena, arsenm
Reviewed By: arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D31504
llvm-svn: 299589
This is a follow-on to r299096 which added support for fmadd.
Subtract does not have the case where with two multiply operands we commute in
order to fuse with the multiply with the fewer uses.
llvm-svn: 299572
Commit r298799 changed code that made the XFAIL on MachineBranchProb.ll
irrelevant, but some configurations still failed. I can't reproduce it
locally, so I'm hoping that enabling this will tell me if some
configurations will really fail or if they were just too slow.
llvm-svn: 299558
This test case depends on the loop being vectorized without forcing the
vectorization factor. If the profitability ever changes in the future (due to
cost model improvements), the test may no longer work as intended. Instead of
checking the resulting IR, we should just check the instruction costs. The
costs will be computed regardless if vectorization is profitable.
llvm-svn: 299545
This is a generic combine enabled via target hook to reduce icmp logic as discussed in:
https://bugs.llvm.org/show_bug.cgi?id=32401
It's likely that other targets will want to enable this hook for scalar transforms,
and there are probably other patterns that can use bitwise logic to reduce comparisons.
Note that we are missing an IR canonicalization for these patterns, and we will probably
prefer the pair-of-compares form in IR (shorter, more likely to fold).
Differential Revision: https://reviews.llvm.org/D31483
llvm-svn: 299542
When DAGCombiner visits a SIGN_EXTEND_INREG of a BUILD_VECTOR with
constant operands, a new BUILD_VECTOR node will be created transformed
constants.
Llvm-stress found a case where the new BUILD_VECTOR had constant operands
of an illegal type, because the (legal) element type is in fact not a legal
scalar type.
This patch changes this so that the new BUILD_VECTOR has the same operand
type as the old one.
Review: Eli Friedman, Nirav Dave
https://bugs.llvm.org//show_bug.cgi?id=32422
llvm-svn: 299540
Summary:
Temporaries are now allocated to operands instead of predicates and this
allocation is used to correctly pair up the rendered operands with the
matched operands.
Previously, ComplexPatterns were allocated temporaries independently in the
Src Pattern and Dst Pattern, leading to mismatches. Additionally, the Dst
Pattern failed to account for the allocated index and therefore always used
temporary 0, 1, ... when it should have used base+0, base+1, ...
Thanks to Aditya Nandakumar for noticing the bug.
Depends on D30539
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D31054
llvm-svn: 299538
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
This is a latent bug that's been hanging around for a while. For a loop-invariant
pointer, expandBounds would return the range {Ptr, Ptr}, but this was interpreted
as a half-open range, not a closed range. So we ended up planting incorrect
bounds checks. Even worse, they were tautological, so we ended up incorrectly
executing the optimized loop.
llvm-svn: 299526
Fix a bug in ARC contract pass where an iterator that pointed to a
deleted instruction was dereferenced.
It appears that tryToContractReleaseIntoStoreStrong was incorrectly
assuming that a call to objc_retain would not immediately follow a call
to objc_release.
rdar://problem/25276306
llvm-svn: 299507
Before r294774, there was a problem when lowering broadcasts to use
128-bit subvectors.
When we looked through a bitcast to find the broadcast input, we'd keep
using the original type, so you'd end up with things like:
(v8f32 (broadcast
(v4f32 (extract_subvector
(v8i32 V),
...))
))
r294774 fixed it to always emit subvectors with the scalar type of the
original source.
It also introduced some asserts, to check that we use scalars with
the same size, and vectors with the same number of elements.
The scalar size equality is checked earlier when looking through bitcasts,
and is a useful assert.
However, the number of elements don't have to be identical: we're always
going to extract a 128-bit subvector, and we can have different size
inputs if we looked through a concat_vector to find a 256-bit source.
Relax the overzealous assert.
Replace it with a check of the original source vector being 256 or 512
bits. If it's 128 bits, we can't extract_subvector from it.
Fixes PR32371.
llvm-svn: 299490
Set correct default flags and section type based on its name for .text,
.data, .bss, .init_array, .fini_array, .preinit_array, .tdata, and .tbss
and support section name suffixes for .data.*, .rodata.*, .text.*,
.bss.*, .tdata.* and .tbss.* which matches the behavior of GAS.
Fixes PR31888.
Differential Revision: https://reviews.llvm.org/D30229
llvm-svn: 299484
This improves upon r246462: that prevented FMOVs from being emitted
for the cross-class INSERT_SUBREGs by disabling the formation of
INSERT_SUBREGs of LOAD. But the ld1.s that we started selecting
caused us to introduce partial dependencies on the vector register.
Avoid that by using SCALAR_TO_VECTOR: it's a first-class citizen that
is folded away by many patterns, including the scalar LDRS that we
want in this case.
Credit goes to Adam for finding the issue!
llvm-svn: 299482
Currently we only fold with ConstantInt RHS. This generalizes to any Constant RHS.
Differential Revision: https://reviews.llvm.org/D31610
llvm-svn: 299466
This mode is just like -mcmodel=small except that it moves the
thread pointer from TPIDR_EL0 to TPIDR_EL1.
Patch by Roland McGrath.
Differential Revision: https://reviews.llvm.org/D31624
llvm-svn: 299462
This patch optimizes two memory intrinsic operations: memset and memcpy based
on the profiled size of the operation. The high level transformation is like:
mem_op(..., size)
==>
switch (size) {
case s1:
mem_op(..., s1);
goto merge_bb;
case s2:
mem_op(..., s2);
goto merge_bb;
...
default:
mem_op(..., size);
goto merge_bb;
}
merge_bb:
Differential Revision: http://reviews.llvm.org/D28966
llvm-svn: 299446
This patch is a part one of two reviews, one for the clang and the other for LLVM.
The patch deletes the back-end intrinsics and adds support for them in the auto upgrade.
Differential Revision: https://reviews.llvm.org/D31393
llvm-svn: 299432
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
This patch teaches the hazard scheduler how to handle empty blocks
when search for the next real instruction when dealing with forbidden
slots.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D31293
llvm-svn: 299427
PSADBW pattern currently supports the 32 bit IR pattern and only GLT (greather than) comparison.
The patch extends the pattern to catch also 64 bit IR pattern and includes all other comparison types (not only GLT).
Differential Revision: https://reviews.llvm.org/D31577
llvm-svn: 299425
Otherwise, yamlize in YAMLTraits.h might be wrongly defined.
This makes some AMDGPU tests fail when LLVM_LINK_LLVM_DYLIB is set.
Differential Revision: https://reviews.llvm.org/D30508
llvm-svn: 299415
Summary:
MASM can produce type streams that are not topologically sorted. It can
even produce type streams with circular references, but those are not
common in practice.
Reviewers: inglorion, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31629
llvm-svn: 299403
Summary:
Add a hook for simplification of shufflevector's with the following rules:
- Constant folding - NFC, as it was already being done by the default handler.
- If only one of the operands is constant, constant fold the shuffle if the
mask does not select elements from the variable operand - to show the hook is firing and affecting the test-cases.
Reviewers: RKSimon, craig.topper, spatel, sanjoy, nlopes, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31525
llvm-svn: 299393
Dont emit Mapping symbols for sections that contain only data.
Summary:
Dont emit mapping symbols for sections that contain only data.
Reviewers: rengolin, weimingz, kparzysz, t.p.northover, peter.smith
Reviewed By: t.p.northover
Patched by Shankar Easwaran <shankare@codeaurora.org>
Subscribers: alekseyshl, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D30724
llvm-svn: 299392
It can be costly to transfer from the gprs to the xmm registers and can prevent loads merging.
This patch splits vXi16/vXi32/vXi64 BUILD_VECTORS that use the same operand in multiple elements into a BUILD_VECTOR with only a single insertion of each of those elements and then performs an unary shuffle to duplicate the values.
There are a couple of minor regressions this patch unearths due to some missing MOVDDUP/BROADCAST folds that I will address in a future patch.
Note: Now that vector shuffle lowering and combining is pretty good we should be reusing that instead of duplicating so much in LowerBUILD_VECTOR - this is the first of several patches to address this.
Differential Revision: https://reviews.llvm.org/D31373
llvm-svn: 299387
The x86_64 ABI requires that the stack is 16 byte aligned on function calls. Thus, the 8-byte error code, which is pushed by the CPU for certain exceptions, leads to a misaligned stack. This results in bugs such as Bug 26413, where misaligned movaps instructions are generated.
This commit fixes the misalignment by adjusting the stack pointer in these cases. The adjustment is done at the beginning of the prologue generation by subtracting another 8 bytes from the stack pointer. These additional bytes are popped again in the function epilogue.
Fixes Bug 26413
Patch by Philipp Oppermann.
Differential Revision: https://reviews.llvm.org/D30049
llvm-svn: 299383
Summary:
Move the aarch64-type-promotion pass within the existing type promotion framework in CGP.
This change also support forking sexts when a new sext is required for promotion.
Note that change is based on D27853 and I am submitting this out early to provide a better idea on D27853.
Reviewers: jmolloy, mcrosier, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: llvm-commits, aemerson, rengolin, mcrosier
Differential Revision: https://reviews.llvm.org/D28680
llvm-svn: 299379
This reverts commit r299047 which is incorrect because the
simplification may result in incorrect propogation of undefs to users of
the folded shuffle.
Thanks to Andrea Di Biagio for pointing this out.
llvm-svn: 299368
- we are now using immediate AsmOperands so that the range check functions are
tablegen'ed.
- Big bonus is that error messages become much more accurate, i.e. instead of a
useless "invalid operand" error message it will not say that the immediate
operand must in range [x,y], which is why regression tests needed updating.
More tablegen operand descriptions could probably benefit from using
immediateAsmOperand, but this is a first good step to get rid of most of the
nearly identical range check functions. I will address the remaining immediate
operands in next clean ups.
Differential Revision: https://reviews.llvm.org/D31333
llvm-svn: 299358
Summary:
Depends on D30928.
This adds support for coercion of stores and memory instructions that do not require insertion to process.
Another few tests down.
I added the relevant tests from rle.ll
Reviewers: davide
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30929
llvm-svn: 299330
Disable bypassing if one of the operands looks like a hash value. Slow
division often occurs in hashtable implementations and fast division is
never taken there because a hash value is extremely unlikely to have
enough upper bits set to zero.
A value is considered to be hash-like if it is produced by
1) XOR operation
2) Multiplication by a constant wider than the shorter type
3) PHI node with all incoming values being hash-like
Differential Revision: https://reviews.llvm.org/D28200
llvm-svn: 299329
The code already allowed vector types in via "isInteger" (which might want
a more specific name), so use splat-friendly constant predicates to match
those types.
llvm-svn: 299304
This can only happen when we have a mix of zero and undef elements and the two vectors have a different arrangement of zeros/undefs. The shuffle should eventually be constant folded to all zeros.
Fixes PR32484.
llvm-svn: 299291
REG_SEQUENCE falls into the same category as COPY for operands mapping:
- They don't have MCInstrDesc with register constraints
- The input variable could use whatever register classes
- It is possible to have register class already assigned to the operands
In particular, given REG_SEQUENCE are always target specific because of
the subreg indices. Those indices must apply to the register class of
the definition of the REG_SEQUENCE and therefore, the target must set a
register class to that definition. As a result, the generic code can
always use that register class to derive a valid mapping for a
REG_SEQUENCE.
llvm-svn: 299285
This patch refactors the code used in llc such that all the users of the
addPassesToEmitFile API have access to a homogeneous way of handling
start/stop-after/before options right out of the box.
Previously each user would have needed to duplicate this logic and set
up its own options.
NFC
llvm-svn: 299282
This is helpful when extracting objects from archives produced by MSVC's
lib.exe, which users absolute paths to describe the archive members.
llvm-svn: 299264
(and (setlt X, 0), (setlt Y, 0)) --> (setlt (and X, Y), 0)
We have 7 similar folds, but this one got away. The fact that the
x86 test with a branch didn't change is probably a separate bug. We
may also be missing this and the related folds in instcombine.
llvm-svn: 299252
A common way to implement nearbyint is by fiddling with the floating
point environment and calling rint. This is used at least by the BSD
libm and musl. As such, canonicalizing the latter to the former will
create infinite loops for libm and generally pessimize performance, at
least when the generic C versions are used.
This change preserves the rint in the libcall translation and also
handles the domain truncation logic, so that rint with float argument
will be reduced to rintf etc.
llvm-svn: 299247
Add a new node to act as a fancy bitcast from f16 operations to
i32 that implicitly zero the high 16-bits of the result.
Alternatively could try making v2f16 legal and canonicalizing
on build_vectors.
llvm-svn: 299246
These are the same tests added for x86 with r299238,
but PPC doesn't specify all branches as cheap, so we
see different patterns in tests with branches.
llvm-svn: 299244
Summary:
This feature enables folding of logical shift operations of up to 3 places into addressing mode on Kryo and Falkor that have a fastpath LSL.
Reviewers: mcrosier, rengolin, t.p.northover
Subscribers: junbuml, gberry, llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D31113
llvm-svn: 299240
This wasn't covering for the case where you have multiple latches and hence
the use of the same loop-id which needs to be mapped to the same loop-id.
llvm-svn: 299237
Our _MM_HINT_T0/T1 constant values are 3/2 which matches gcc, but not icc or Intel documentation. Interestingly gcc had this same bug on their implementation of the gather/scatter builtins at one point too.
Fixes PR32411.
llvm-svn: 299234
Summary: Currently the VP metadata was dropped when InstCombine converts a call to direct call. This patch converts the VP metadata to branch_weights so that its hotness is recorded.
Reviewers: eraman, davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31344
llvm-svn: 299228
Implementation of TargetInstrInfo::findCommutedOpIndices for MIPS target,
restricting commutativity to second and third operand only for
dpaadd_[su].df instructions therein.
Prior to this change, there were cases where the vector that is to be added
to the dot product of the other two could take a position other than the
first one in the instruction, generating false output in the destination
vector.
Such behavior has been noticed in the two functions generating v2i64 output
values so far. Other ones may exhibit such behavior as well, just not for
the vector operands which are present in the test at the moment.
Tests altered so that the function's first operand is a constant splat so
that it can be loaded with a ldi instruction, since that is the case in
which the erroneous instruction operand placement has occurred. We check
that the register which is present in the ldi instruction is placed as the
first operand in the corresponding dpadd instruction.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D30827
llvm-svn: 299223
Since LOCR only accepts GR32 virtual registers, its operands must be copied
into this regclass in insertSelect(), when an LOCR is built. Otherwise, the
case where the source operand was GRX32 will produce invalid IR.
Review: Ulrich Weigand
llvm-svn: 299220
Currently ComputeNumSignBits returns the minimum number of sign bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original ComputeNumSignBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
I've only added support for BUILD_VECTOR and EXTRACT_VECTOR_ELT so far, all others will default to demanding all elements but can be updated in due course.
Followup to D25691.
Differential Revision: https://reviews.llvm.org/D31311
llvm-svn: 299219
Even on older subtargets that lack vector support, there may be vector values
with just one element in the input program. These are converted during DAG
legalization to scalar values.
The pre-legalize SystemZ DAGCombiner methods should in this circumstance not
touch these nodes. This patch adds a check for this in
SystemZTargetLowering::combineEXTRACT_VECTOR_ELT().
Review: Ulrich Weigand
llvm-svn: 299213
The patch rL298481 was reverted due to crash on clang-with-lto-ubuntu build.
The reason of the crash was type mismatch between either a or b and RHS in the following situation:
LHS = sext(a +nsw b) > RHS.
This is quite rare, but still possible situation. Normally we need to cast all {a, b, RHS} to their widest type.
But we try to avoid creation of new SCEV that are not constants to avoid initiating recursive analysis that
can take a lot of time and/or cache a bad value for iterations number. To deal with this, in this patch we
reject this case and will not try to analyze it if the type of sum doesn't match with the type of RHS. In this
situation we don't need to create any non-constant SCEVs.
This patch also adds an assertion to the method IsProvedViaContext so that we could fail on it and not
go further into range analysis etc (because in some situations these analyzes succeed even when the passed
arguments have wrong types, what should not normally happen).
The patch also contains a fix for a problem with too narrow scope of the analysis caused by wrong
usage of predicates in recursive invocations.
The regression test on the said failure: test/Analysis/ScalarEvolution/implied-via-addition.ll
Reviewers: reames, apilipenko, anna, sanjoy
Reviewed By: sanjoy
Subscribers: mzolotukhin, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D31238
llvm-svn: 299205
Previously compiler often extracted common immediates into specific register, e.g.:
```
%vreg0 = S_MOV_B32 0xff;
%vreg2 = V_AND_B32_e32 %vreg0, %vreg1
%vreg4 = V_AND_B32_e32 %vreg0, %vreg3
```
Because of this SDWA peephole failed to find SDWA convertible pattern. E.g. in previous example this could be converted into 2 SDWA src operands:
```
SDWA src: %vreg2 src_sel:BYTE_0
SDWA src: %vreg4 src_sel:BYTE_0
```
With this change peephole check if operand is either immediate or register that is copy of immediate.
llvm-svn: 299202
Summary:
Triggered by commit r298620: "[LV] Vectorize GEPs".
If we encounter a vector GEP with scalar arguments, we splat the scalar
into a vector of appropriate size before we scatter the argument.
Reviewers: arsenm, mehdi_amini, bkramer
Reviewed By: arsenm
Subscribers: bjope, mssimpso, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D31416
llvm-svn: 299186
Summary:
Assertions assuming that function calls may not have zero durations do
not seem to hold in the wild. There are valid cases where the conversion
of the tsc counters end up becoming zero-length durations. These
assertions don't really hold and the algorithms don't need those to be
true for them to work.
Reviewers: dblaikie, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31519
llvm-svn: 299150
Since there is no sdiv in SCEV, an 'udiv' is a better canonical form than an 'sdiv' as the user of induction variable
Differential Revision: https://reviews.llvm.org/D31488
llvm-svn: 299118
If set to false it does not remove global aliases. With this parameter
set to false it should be safe to run the pass before link.
Differential Revision: https://reviews.llvm.org/D31489
llvm-svn: 299108
BIND_OPCODE_DONE/REBASE_OPCODE_DONE may appear at the end of the opcode array,
but they are not required to. The linker only adds them as padding to align the
opcodes to pointer size.
This fixes rdar://problem/31285560.
llvm-svn: 299104
Mostly this change adds support converting to and from
YAML which will allow us to write more test cases for
the WebAssembly MC and lld ports.
Better support for objdump, readelf, and nm will be in
followup CLs.
I had to update the two wasm test binaries because they
used the old style 'name' section which is no longer
supported.
Differential Revision: https://reviews.llvm.org/D31099
Patch by Sam Clegg
llvm-svn: 299101
Now alternatively to the TargetOption.AllowFPOpFusion global flag, FMUL->FADD
can also use the per operation FMF to allow fusion.
The idea here is not to port everything to the new scheme (e.g. fused
multiply-and-sub will be ported later) but that this work all the way from
clang.
The transformation is conditionalized on *both* the FADD and the FMUL having
the FMF contract flag.
Differential Revision: https://reviews.llvm.org/D31169
llvm-svn: 299096
In the long-term, we want to replace statistics with something
finer-grained that lets us gather per-function data.
Remarks are that replacement.
Create an ORE instance in SelectionDAGISel, and pass it to
SelectionDAG.
SelectionDAG was used so that we can emit remarks from all
SelectionDAG-related code, including TargetLowering and DAGCombiner.
This isn't used in the current patch but Adam tells me he's interested
for the fp-contract combines.
Use the ORE instance to emit FastISel failures as remarks (instead of
the mix of dbgs() dumps and statistics that we currently have).
Eventually, we want to have an API that tells us whether remarks are
enabled (http://llvm.org/PR32352) so that we don't emit expensive
remarks (in this case, dumping IR) when it's not needed. For now, use
'isEnabled' as a crude replacement.
This does mean that the replacement for '-fast-isel-verbose' is now
'-pass-remarks-missed=isel'. Additionally, clang users also need to
enable remark diagnostics, using '-Rpass-missed=isel'.
This also removes '-fast-isel-verbose2': there are no static statistics
that we want to only enable in asserts builds, so we can always use
the remarks regardless of the build type.
Differential Revision: https://reviews.llvm.org/D31405
llvm-svn: 299093
Summary:
These tests were not being run because the yaml extension
wasn't be picked up by lit.
This change also fixes the tests which themselves were broken.
Patch By: Sam Clegg
Reviewers: beanz
Reviewed By: beanz
Subscribers: fhahn
Differential Revision: https://reviews.llvm.org/D31436
llvm-svn: 299088
This assert is just trying to test that processing each record adds
exactly one entry to the index map. The assert logic was wrong when the
first record in the type stream was a field list.
I've simplified the code by moving the LF_FIELDLIST-specific logic into
the callback for that record type.
llvm-svn: 299035
This should work on all platforms now that r299006 has landed. Tested locally
on Windows and Linux.
This moves exe symbol-specific method implementations out of NativeRawSymbol
into a concrete subclass. Also adds implementations for hasCTypes and
hasPrivateSymbols and a simple test to ensure the native reader can access the
summary information for the executable from the PDB.
Original Differential Revision: https://reviews.llvm.org/D31059
llvm-svn: 299019
Some of the GEP combines (e.g., descaling) can't handle vector GEPs. We have an
existing check that attempts to bail out if given a vector GEP. However, the
check only tests the GEP's pointer operand. A GEP results in a vector of
pointers if at least one of its operands is vector-typed (e.g., its pointer
operand could be a scalar, but its index could be a vector). We should just
check the type of the GEP itself. This should fix PR32414.
Reference: https://bugs.llvm.org/show_bug.cgi?id=32414
Differential Revision: https://reviews.llvm.org/D31470
llvm-svn: 299017
Craig Topper