Summary:
Implement support for hexadecimal escape sequences to match how GNU 'as'
handles them. I.e., read all hexadecimal characters and truncate to the
lower 16 bits.
Reviewers: nickdesaulniers
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68483
llvm-svn: 373888
Summary:
rL371826 rearranged some output from llvm-objdump for GNU objdump compatability, but there still seem to be some more.
I think this rearrangement is a little closer. Overview of the ordering which matches GNU objdump:
* Archive headers
* File headers
* Section headers
* Symbol table
* Dwarf debugging
* Relocations (if `--disassemble` is not used)
* Section contents
* Disassembly
Reviewers: jhenderson, justice_adams, grimar, ychen, espindola
Reviewed By: jhenderson
Subscribers: aprantl, emaste, arichardson, jrtc27, atanasyan, seiya, llvm-commits, MaskRay
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68066
llvm-svn: 373671
These old aliases were renamed, but are still used by some projects (eg newlib).
Differential Revision: https://reviews.llvm.org/D68392
llvm-svn: 373618
For the following two cases, we currently suppress the symbols. This
patch emits them (compatible with GNU as).
* `test2_a = undef`: if `undef` is otherwise unused.
* `.hidden hidden`: if `hidden` is unused. This is the main point of the
patch, because omitting the symbol would cause a linker semantic
difference.
It causes a behavior change that is not compatible with GNU as:
.weakref foo1, bar1
When neither foo1 nor bar1 is used, we now emit bar1, which is arguably
more consistent.
Another change is that we will emit .TOC. for .TOC.@tocbase . For this
directive, suppressing .TOC. can be seen as a size optimization, but we
choose to drop it for simplicity and consistency.
llvm-svn: 373168
Previously we had an assert but this can actually occur in valid user
code so we need to handle this in release builds too.
Differential Revision: https://reviews.llvm.org/D67997
llvm-svn: 372934
Summary:
Adds the new load_splat instructions as specified at
https://github.com/WebAssembly/simd/blob/master/proposals/simd/SIMD.md#load-and-splat.
DAGISel does not allow matching multiple copies of the same load in a
single pattern, so we use a new node in WebAssemblyISD to wrap loads
that should be splatted.
Depends on D67783.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67784
llvm-svn: 372655
The recently announced IBM z15 processor implements the architecture
already supported as "arch13" in LLVM. This patch adds support for
"z15" as an alternate architecture name for arch13.
The patch also uses z15 in a number of places where we used arch13
as long as the official name was not yet announced.
llvm-svn: 372435
In case of using 32-bit GOT access to the table requires two instructions
with attached %got_hi and %got_lo relocations. This patch implements
correct expansion of 'lw/sw' instructions in that case.
Differential Revision: https://reviews.llvm.org/D67705
llvm-svn: 372251
r361845 changed the way we handle "D16" vs. "D32" targets; there used to
be a negative "d16" which removed instructions from the instruction set,
and now there's a "d32" feature which adds instructions to the
instruction set. This is good, but there was an oversight in the
implementation: the behavior of VFPv2 was changed. In particular, the
"vfp2" feature was changed to imply "d32". This is wrong: VFPv2 only
supports 16 D registers.
In practice, this means if you specify -mfpu=vfpv2, the compiler will
generate illegal instructions.
This patch gets rid of "vfp2d16" and "vfp2d16sp", and fixes "vfp2" and
"vfp2sp" so they don't imply "d32".
Differential Revision: https://reviews.llvm.org/D67375
llvm-svn: 372186
This is the main CodeGen patch to support the arm64_32 watchOS ABI in LLVM.
FastISel is mostly disabled for now since it would generate incorrect code for
ILP32.
llvm-svn: 371722
Summary:
Now that llvm-objdump allows target-specific options, we match the
`no-aliases` and `numeric` options for RISC-V, as supported by GNU objdump.
This is done by overriding the variables used for the command-line options, so
that the command-line options are still supported.
This patch updates all tests using `llvm-objdump -riscv-no-aliases` to use
`llvm-objdump -M no-aliases`.
Reviewers: luismarques, asb
Reviewed By: luismarques, asb
Subscribers: pzheng, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66139
llvm-svn: 371534
Summary:
This is an option primarily to use during testing. Instead of always
printing registers using their ABI names, this allows a user to request they
are printed with their architectural name.
This is then used in the register constraint tests to ensure the mapping
between architectural and abi names is correct.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: pzheng, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65950
llvm-svn: 371531
microMIPS jump and link exchange instruction stores a target in a
26-bits field. Despite other microMIPS JAL instructions these bits
are target address shifted right 2 bits [1]. The patch fixes the
JALX instruction decoding and uses 2-bit shift.
[1] MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set
Differential Revision: https://reviews.llvm.org/D67320
llvm-svn: 371428
The family of 'dual-accumulating' vector multiply-add instructions
(VMLADAV, VMLALDAV and VRMLALDAVH) can all operate on both signed and
unsigned integer types, and they all have an 'exchange' variant (with
an X in the name) that modifies which pairs of vector lanes in the two
inputs are multiplied together. But there's a clause in the spec that
says that the X variants //don't// operate on unsigned integer types,
only signed. You can have X, or unsigned, or neither, but not both.
We didn't notice that clause when we implemented the MC support for
these instructions, so LLVM believes that things like VMLADAVX.U8 do
exist, contradicting the spec. Here I fix that by conditioning them
out in Tablegen.
In order to do that, I've reversed the nesting order of the Tablegen
multiclasses for those instructions. Previously, the innermost
multiclass generated the X and not-X variants, and the one outside
that generated the A and not-A variants. Now X is done by the outer
multiclass, which allows me to bypass that one when I only want the
two not-X variants.
Changing the multiclass nesting order also changes the names of the
instruction ids unless I make a special effort not to. I decided that
while I was changing them anyway I'd make them look nicer; so now the
instructions have names like MVE_VMLADAVs32 or MVE_VMLADAVaxs32,
instead of cumbersome _noacc_noexch suffixes.
The corresponding multiply-subtract instructions are unaffected. Those
don't accept unsigned types at all, either in the spec or in LLVM.
Reviewers: ostannard, dmgreen
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67214
llvm-svn: 371405
Specify the Unpredictable bits, and return softfails when appropriate.
Patch by Mark Murray!
Differential revision: https://reviews.llvm.org/D66939
llvm-svn: 371374
```
.type foo,@gnu_indirect_function
.set foo,foo_resolver
.set foo2,foo
.set foo3,foo2
```
The types of foo2 and foo3 should be STT_GNU_IFUNC, but we currently
resolve them to the type of foo_resolver. This patch fixes it.
Differential Revision: https://reviews.llvm.org/D67206
Patch by Senran Zhang
llvm-svn: 371312
These flags should simply be passed through to the target, which will do
the right thing. Add an MC/X86 test that uses these directives with the
three primary object file formats and shows that they disassemble the
same everywhere.
There is a missing test for .code32 on Windows ARM, since I'm not sure
exactly how to construct one.
Fixes PR43203
llvm-svn: 370805
The code here seems to date back to r134705, when tablegen lowering was first
being added. I don't believe that we need to include CPSR implicit operands on
the MCInst. This now works more like other backends (like AArch64), where all
implicit registers are skipped.
This allows the AliasInst for CSEL's to match correctly, as can be seen in the
test changes.
Differential revision: https://reviews.llvm.org/D66703
llvm-svn: 370745
Decoding of VMSR doesn't diagnose some unpredictable encodings, as the unpredictable bits are not correctly set.
Diff-reduce this instruction's internals WRT VMRS so I can see the differences better. Mostly this is s/src/Rt/g.
Fill in the "should-be-(0)" bits.
Designate the Unpredictable{} bits for both VMRS and VMSR.
Patch by Mark Murray!
Differential revision: https://reviews.llvm.org/D66938
llvm-svn: 370729
Summary:
Adds clang builtins and LLVM intrinsics for these experimental
instructions. They are not implemented in engines yet, but that is ok
because the user must opt into using them by calling the builtins.
Reviewers: aheejin, dschuff
Reviewed By: aheejin
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D67020
llvm-svn: 370556
Also improve assembler parser register validation for .seh_ directives.
This requires moving X86-specific seh directive handling into the x86
backend, which addresses some assembler FIXMEs.
Differential Revision: https://reviews.llvm.org/D66625
llvm-svn: 370533
Add an WASM_SYMBOL_NO_STRIP flag, so that __attribute__((used)) doesn't
need to imply exporting. When targeting Emscripten, have
WASM_SYMBOL_NO_STRIP imply exporting.
Differential Revision: https://reviews.llvm.org/D62542
llvm-svn: 370415
Summary:
Reported in https://github.com/opencv/opencv/issues/15413.
We have serveral extended mnemonics for Move To/From Vector-Scalar Register Instructions
eg: mffprd,mtfprd etc.
We only support one of them, this patch add the others.
Reviewers: nemanjai, steven.zhang, hfinkel, #powerpc
Reviewed By: hfinkel
Subscribers: wuzish, qcolombet, hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66963
llvm-svn: 370411
Summary:
There is no reason to differ in assembler behavior here between -msvc
and -gnu targets. Without this setting, the text after the '@' is
interpreted as a symbol variable, like foo@IMGREL.
Reviewers: mstorsjo
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66974
llvm-svn: 370408
When a "base" in the `lw/sw $reg1, symbol($reg2)` instruction is
a register and generated code is position independent, backend
does not add the "base" value to the symbol address.
```
lw $reg1, %got(symbol)($gp)
lw/sw $reg1, 0($reg1)
```
This patch fixes the bug and adds the missed `addu` instruction by
passing `BaseReg` into the `loadAndAddSymbolAddress` routine and handles
the case when the `BaseReg` is the zero register to escape redundant
`move reg, reg` instruction:
```
lw $reg1, %got(symbol)($gp)
addu $reg1, $reg1, $reg2
lw/sw $reg1, 0($reg1)
```
Differential Revision: https://reviews.llvm.org/D66894
llvm-svn: 370353
Stop counting explicitly disabled user_spgr's in the user_sgpr_count field of the kernel descriptor.
Differential Revision: https://reviews.llvm.org/D66900
llvm-svn: 370250
Now `lw/sw $reg, sym+offset` pseudo instructions for global symbol `sym`
are lowering into the following three instructions.
```
lw $reg, %got(symbol)($gp)
addiu $reg, $reg, offset
lw/sw $reg, 0($reg)
```
It's possible to reduce the number of instructions by taking the offset
in account in the final `lw/sw` command. This patch implements that
optimization.
```
lw $reg, %got(symbol)($gp)
lw/sw $reg, offset($reg)
```
Differential Revision: https://reviews.llvm.org/D66553
llvm-svn: 369756
Now pseudo instruction `la $6, symbol+8($6)` is expanding into the following
chain of commands:
```
lw $1, %got(symbol+8)($gp)
addiu $1, $1, 8
addu $6, $1, $6
```
This is incorrect. When a linker handles the `R_MIPS_GOT16` relocation,
it does not expect to get any addend and breaks on assertion. Otherwise
it has to create new GOT entry for each unique "sym + offset" pair.
Offset for a global symbol should be added to result of loading GOT
entry by a separate `add` command.
The patch fixes the problem by stripping off an offset from the expression
passed to the `%got`. That's interesting that even current code inserts
a separate `add` command.
Differential Revision: https://reviews.llvm.org/D66552
llvm-svn: 369755
Local symbols in the indirect symbol table contain the value
`INDIRECT_SYMBOL_LOCAL` and the corresponding __pointers entry must
contain the address of the target.
In r349060, I added support for local symbols in the indirect symbol
table, which was checking if the symbol `isDefined` && `!isExternal` to
determine if the symbol is local or not.
It turns out that `isDefined` will return false if the user of the
symbol comes before its definition, and we'll again generate .long 0
which will be the symbol at the adress 0x0.
Instead of doing that, use GlobalValue::hasLocalLinkage() to check if
the symbol is local.
Differential Revision: https://reviews.llvm.org/D66563
llvm-svn: 369671
The hint instructions are enabled by default (if the standard C extension is
enabled). To disable them pass -mattr=-rvc-hints.
Differential Revision: https://reviews.llvm.org/D62592
llvm-svn: 369528
Follow binutils in using RISCV_32_PCREL for the FDE initial location. As
explained in the relevant binutils commit
<a6cbf936e3>,
the ADD/SUB pair of relocations is problematic in the presence of linker
relaxation.
This patch has the same end goal as D64715 but includes test changes and
avoids adding a new global VariantKind to MCExpr.h (preferring
RISCVMCExpr VKs like the rest of the RISC-V backend).
Differential Revision: https://reviews.llvm.org/D66419
llvm-svn: 369375
WebAssembly doesn't support PC relative relocation or relocation
expressions that can't be reduced to single symbol.
The only support for we have for fixups involving two symbols are when
both symbols are defined and withing the same section. In this case
evaluateFixup will already have evaluated to the expression before
calling recordRelocation.
llvm-svn: 369317
The current behavior of shouldForceRelocation forces relocations for the
majority of fixups when relaxation is enabled. This makes sense for
fixups which incorporate symbols but is unnecessary for simple data
fixups where the fixup target is already resolved to an absolute value.
Differential Revision: https://reviews.llvm.org/D63404
Patch by Edward Jones.
llvm-svn: 369257
Replace
- error: No relocation available to represent this relative expression
with
+ error: symbol 'undef' can not be undefined in a subtraction expression
or
+ error: Cannot represent a difference across sections
Keep !IsPcRel as an assertion after the two diagnostic checks are done.
llvm-svn: 369239
GNU as keeps the original symbol in the symbol table for defined @ and
@@, but suppresses it in other cases (@@@ or undefined). The original
symbol is usually undesired:
In a shared object, the original symbol can be localized with a version
script, but it is hard to remove/localize in an archive:
1) a post-processing step removes the undesired original symbol
2) consumers (executable) of the archive are built with the
version script
Moreover, it can cause linker issues like binutils PR/18703 if the
original symbol name and the base name of the versioned symbol is the
same (both ld.bfd and gold have some code to work around defined @ and
@@). In lld, if it sees f and f@v1:
--version-script =(printf 'v1 {};') => f and f@v1
--version-script =(printf 'v1 { f; };') => f@v1 and f@@v1
It can be argued that @@@ added on 2000-11-13 corrected the @ and @@ mistake.
This patch catches some more multiple version errors (defined @ and @@),
and consistently suppress the original symbol. This addresses all the
problems listed above.
If the user wants other aliases to the versioned symbol, they can copy
the original symbol to other symbol names with .set directive, e.g.
.symver f, f@v1 # emit f@v1 but not f into .symtab
.set f_impl, f # emit f_impl into .symtab
llvm-svn: 369233
This patch allows symbols followed by an expression for an offset to be
parsed as bare symbols.
Differential Revision: https://reviews.llvm.org/D57332
llvm-svn: 369097
Function MipsAsmParser::expandMemInst() did not properly handle
instruction `sc` with a symbol as an argument because first argument
would be counted twice. We add additional checks and handle this case
separately.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D64252
llvm-svn: 368160
We have aliases that disambiguate memory forms of bt/btc/btr/bts
without suffixes to the 32-bit form. These aliases should have
been updated when the instructions were updated in r356413.
llvm-svn: 368127
The upper 4 bits of the immediate byte are used to encode a
register. We need to limit the explicit immediate to fit in the
remaining 4 bits.
Fixes PR42899.
llvm-svn: 368123
A TYPE_INDEX operand (as used by call_indirect) used to be represented
by the InstPrinter as a symbol (e.g. .Ltype_index0@TYPE_INDEX) which
was a bit of a mismatch with the WasmObjectWriter which expects an
unnamed symbol, to receive the signature from and then turn into a
reloc.
There was really no good way to round-trip this information. An earlier
version of this patch tried to attach the signature information using
a .functype, but that ran into trouble when the symbol was re-emitted
without a name. Removing the name was a giant hack also.
The current version changes the assembly syntax to have an inline
signature spec for TYPEINDEX operands that is always unnamed, which
is much more elegant both in syntax and in implementation (as now the
assembler is able to follow the same path as the regular backend)
Reviewers: sbc100, dschuff, aheejin, jgravelle-google, sunfish, tlively
Subscribers: arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64758
llvm-svn: 367590
If an operand of the `lw/sw` instructions is a symbol, these instructions
incorrectly lowered using not-position-independent chain of commands.
For PIC code we should use `lw/addiu` instructions with the `R_MIPS_GOT16`
and `R_MIPS_LO16` relocations respectively. Instead of that LLVM generates
position dependent code with the `R_MIPS_HI16` and `R_MIPS_LO16`
relocations.
This patch provides a fix for the bug by handling PIC case separately in
the `MipsAsmParser::expandMemInst`. The main idea is to generate a chain
of PIC instructions to load a symbol address into a register and then
load the address content.
The fix is not optimal and does not fix all PIC-related problems. This
is a task for subsequent patches.
Differential Revision: https://reviews.llvm.org/D65524
llvm-svn: 367580
Summary:
GCC Accepts both (reg) and 0(reg) for atomic instruction memory
operands. These instructions do not allow for an offset in their
encoding, so in the latter case, the 0 is silently dropped.
Due to how we have structured the RISCVAsmParser, the easiest way to add
support for parsing this offset is to add a custom AsmOperand and
parser. This parser drops all the parens, and just keeps the register.
This commit also adds a custom printer for these operands, which matches
the GCC canonical printer, printing both `(a0)` and `0(a0)` as `(a0)`.
Reviewers: asb, lewis-revill
Reviewed By: asb
Subscribers: s.egerton, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65205
llvm-svn: 367553
Summary:
According to the Armv8.1-M manual CSEL, CSINC, CSINV and CSNEG are
"constrained unpredictable" when SP is used as the source register Rn.
The assembler should diagnose this case.
Reviewers: momchil.velikov, dmgreen, ostannard, simon_tatham, t.p.northover
Reviewed By: ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65505
llvm-svn: 367433
These tests have been disabled on Linux and Windows due to failing
there. I think that could be down to a race condition between stdout
and stderr, so I have disabled output to stdout.
For the moment, only re-enable on linux, because I don't have a windows
machine to test on.
llvm-svn: 367311
Because they fail there too.
FAIL: LLVM :: MC/RISCV/rv32i-aliases-invalid.s (24397 of 32659)
******************** TEST 'LLVM :: MC/RISCV/rv32i-aliases-invalid.s' FAILED ********************
Script:
--
: 'RUN: at line 2'; not c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s -triple=riscv32 -riscv-no-aliases 2>&1 | c:\src\llvm.monorepo\build.release2\bin\filecheck.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s
: 'RUN: at line 3'; not c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s -triple=riscv32 2>&1 | c:\src\llvm.monorepo\build.release2\bin\filecheck.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s
--
Exit Code: 1
Command Output (stdout):
--
$ ":" "RUN: at line 2"
$ "not" "c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe" "C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s" "-triple=riscv32" "-riscv-no-aliases"
$ "c:\src\llvm.monorepo\build.release2\bin\filecheck.exe" "C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s"
C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s:10:21: error: CHECK: expected string not found in input
li t4, foo # CHECK: :[[@LINE]]:8: error: immediate must be an integer in the range [-2147483648, 4294967295]
^
<stdin>:5:1: note: scanning from here
li x0, -2147483649 # CHECK: :[[@LINE]]:8: error: immediate must be an integer in the range [-2147483648, 4294967295]
^
<stdin>:5:1: note: with "@LINE" equal to "10"
li x0, -2147483649 # CHECK: :[[@LINE]]:8: error: immediate must be an integer in the range [-2147483648, 4294967295]
^
<stdin>:5:38: note: possible intended match here
li x0, -2147483649 # CHECK: :[[@LINE]]:8: error: immediate must be an integer in the range [-2147483648, 4294967295]
^
error: command failed with exit status: 1
--
--
********************
Testing: 0 .. 10.. 20.. 30.. 40.. 50.. 60.. 70
FAIL: LLVM :: MC/RISCV/rv64i-aliases-invalid.s (24416 of 32659)
******************** TEST 'LLVM :: MC/RISCV/rv64i-aliases-invalid.s' FAILED ********************
Script:
--
: 'RUN: at line 2'; not c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s -triple=riscv64 -riscv-no-aliases 2>&1 | c:\src\llvm.monorepo\build.release2\bin\filecheck.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s
: 'RUN: at line 3'; not c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s -triple=riscv64 2>&1 | c:\src\llvm.monorepo\build.release2\bin\filecheck.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s
--
Exit Code: 1
Command Output (stdout):
--
$ ":" "RUN: at line 2"
$ "not" "c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe" "C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s" "-triple=riscv64" "-riscv-no-aliases"
$ "c:\src\llvm.monorepo\build.release2\bin\filecheck.exe" "C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s"
C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s:6:21: error: CHECK: expected string not found in input
li t4, foo # CHECK: :[[@LINE]]:8: error: operand must be a constant 64-bit integer
^
<stdin>:2:1: note: scanning from here
li t5, 0x10000000000000000 # CHECK: :[[@LINE]]:8: error: unknown operand
^
<stdin>:2:1: note: with "@LINE" equal to "6"
li t5, 0x10000000000000000 # CHECK: :[[@LINE]]:8: error: unknown operand
^
<stdin>:13:67: note: possible intended match here
C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s:12:13: error: immediate must be an integer in the range [0, 63]
^
error: command failed with exit status: 1
llvm-svn: 367215
Summary:
The bitperm feature flag is now prefixed with SVE2, as it is for all other SVE2
extensions
Patch by Maciej Gabka.
Reviewers: sdesmalen, rovka, chill, SjoerdMeijer, rengolin
Reviewed By: SjoerdMeijer, rengolin
Differential Revision: https://reviews.llvm.org/D65327
llvm-svn: 367124
Embedded Trace Extension and Trace Buffer Extension are optional
future architecture extensions.
(cf. https://developer.arm.com/architectures/cpu-architecture/a-profile/exploration-tools)
Their system registers are documented here:
https://developer.arm.com/docs/ddi0601/a
ETE shares register names with ETM. One exception is the ETE
TRCEXTINSELR0 register, which has the same encoding as the ETM
TRCEXTINSELR register (but different semantics). This patch treats
them as aliases: the assembler will accept both names, emitting
identical encoding, and the disassembler will keep disassembling
to TRCEXRINSELR.
Differential Revision: https://reviews.llvm.org/D63707
llvm-svn: 367093
... for the vector forms of `{SQ,UQ,}{INC,DEC}P` instructions. Also continue
supporting the exsting behaviour of not requiring an explicit size
specifier. The preferred disasembly is *with* the specifier.
This is implemented by redefining intruction forms to require vector predicates
with explicit size and adding aliases, which allow a predicate with no size.
Differential Revision: https://reviews.llvm.org/D65145
llvm-svn: 367019
We were getting test failures on some builders, which pointed to @LINE
being an undefined variable. I think that these failures should have
been fixed by https://reviews.llvm.org/rL366434, so I'm re-enabling the
test.
llvm-svn: 366797
This reverts commit r366686 as it appears to be causing buildbot
failures on sanitizer-x86_64-linux-android and sanitizer-x86_64-linux.
llvm-svn: 366708
This patch was not the reason of the buildbot failure.
Deleted code was introduced as a work around for a bug in the gold linker
(http://sourceware.org/PR16794). Test case that was given as a reason for
this part of code, the one on previous link, now works for the gold.
This condition is too strict and when a code is compiled with debug info
it forces generation of numerous relocations with symbol for architectures
that do not have relocation addend.
Reviewers: arsenm, espindola
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D64327
llvm-svn: 366686
Summary:
According to the new Armv8-M specification
https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf the
instructions SQRSHRL and UQRSHLL now have an additional immediate
operand <saturate>. The new assembly syntax is:
SQRSHRL<c> RdaLo, RdaHi, #<saturate>, Rm
UQRSHLL<c> RdaLo, RdaHi, #<saturate>, Rm
where <saturate> can be either 64 (the existing behavior) or 48, in
that case the result is saturated to 48 bits.
The new operand is encoded as follows:
#64 Encoded as sat = 0
#48 Encoded as sat = 1
sat is bit 7 of the instruction bit pattern.
This patch adds a new assembler operand class MveSaturateOperand which
implements parsing and encoding. Decoding is implemented in
DecodeMVEOverlappingLongShift.
Reviewers: ostannard, simon_tatham, t.p.northover, samparker, dmgreen, SjoerdMeijer
Reviewed By: simon_tatham
Subscribers: javed.absar, kristof.beyls, hiraditya, pbarrio, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64810
llvm-svn: 366555
In debug frame information, some fields, e.g., Length in CIE/FDE and
Offset in FDE are attributes to describe the structure of CIE/FDE. They
are not related to the relaxed code. However, these attributes are
symbol differences. So, in current design, these attributes will be
filled as zero and LLVM generates relocations for them.
We only need to generate relocations for symbols in executable sections.
So, if the symbols are not located in executable sections, we still
evaluate their values under relaxation.
Differential Revision: https://reviews.llvm.org/D61584
llvm-svn: 366531
There doesn't seem to be a practical reason for these instructions to have
different restrictions on the types of relocations that they may be used
with, notwithstanding the language in the ELF AArch64 spec that implies that
specific relocations are meant to be used with specific instructions.
For example, we currently forbid the first instruction in the following
sequence, despite it currently being used by clang to generate a global
reference under -mcmodel=large:
movz x0, #:abs_g0_nc:foo
movk x0, #:abs_g1_nc:foo
movk x0, #:abs_g2_nc:foo
movk x0, #:abs_g3:foo
Therefore, allow MOVK/MOVN/MOVZ to accept the union of the set of relocations
that they currently accept individually.
Differential Revision: https://reviews.llvm.org/D64466
llvm-svn: 366461
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
llvm-svn: 366442
This directive forces to use the alternate register for context pointer.
For example, this code:
.cplocal $4
jal foo
expands to:
ld $25, %call16(foo)($4)
jalr $25
Differential Revision: https://reviews.llvm.org/D64743
llvm-svn: 366300
The canonical GNU form of JALR resembles a load/store instruction rather
than placing the immediate offset as a separate argument, so match this
behaviour. Also add parser-only aliases for the three-operand form, and
add other shorter aliases also emitted by GNU tools.
Differential Revision: https://reviews.llvm.org/D55277
Patch by James Clarke.
llvm-svn: 366179
RISCVAsmBackend::shouldInsertExtraNopBytesForCodeAlign() assumed that the
align specified would be greater than or equal to the minimum nop length, but
that is not always the case - for example if a user specifies ".align 0" in
assembly.
Differential Revision: https://reviews.llvm.org/D63274
Patch by Edward Jones.
llvm-svn: 366176
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
Summary:
These are emitted as identifiers by the InstPrinter, so we should
parse them as such. These could potentially clash with symbols of
the same name, but that is out of our (the WebAssembly backend) control.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64770
llvm-svn: 366139
assembly command
'macCatalyst' is more readable than 'maccatalyst'. I renamed the objdump output,
but the assembly should match it as well.
llvm-svn: 365964
This patch series adds support for the next-generation arch13
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Assembler/disassembler support for new instructions.
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of arch13 as host processor.
Note: No currently available Z system supports the arch13
architecture. Once new systems become available, the
official system name will be added as supported -march name.
llvm-svn: 365932
Summary:
Useful for jumps, such as `j .`.
I am not sure who should review this. Do not hesitate to change the reviewers if needed.
Reviewers: asb, jrtc27, lenary
Reviewed By: lenary
Subscribers: MaskRay, lenary, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63669
Patch by John LLVM (JohnLLVM)
llvm-svn: 365881
The VQDMLAH.U8, VQDMLAH.U16 and VQDMLAH.U32 instructions don't
actually exist: the Armv8.1-M architecture spec only lists signed
forms of that instruction. The unsigned ones were added in error: they
existed in an early draft of the spec, but they were removed before
the public version, and we missed that particular spec change.
Also affects the variant forms VQDMLASH, VQRDMLAH and VQRDMLASH.
Reviewers: miyuki
Subscribers: javed.absar, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64502
llvm-svn: 365747
Deleted code was introduced as a work around for a bug in the gold linker
(http://sourceware.org/PR16794). Test case that was given as a reason for
this part of code, the one on previous link, now works for the gold.
This condition is too strict and when a code is compiled with debug info
it forces generation of numerous relocations with symbol for architectures
that do not have relocation addend.
Reviewers: arsenm, espindola
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D64327
llvm-svn: 365618
Summary:
Use the same predicates as VSTMDB/VLDMIA since VPUSH/VPOP alias to
these.
Patch by Momchil Velikov.
Reviewers: ostannard, simon_tatham, SjoerdMeijer, samparker, t.p.northover, dmgreen
Reviewed By: dmgreen
Subscribers: javed.absar, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64413
llvm-svn: 365604
The `sge/sgeu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than or equal `Src2/Imm` and
to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64314
llvm-svn: 365476
The `sgt/sgtu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than `Src2/Imm` and to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64313
llvm-svn: 365475
Summary:
Before, they were one category of operands which could cause
crashes in non-sensical combinations, e.g. "f32.const symbol".
Now these are forced to be an error.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64039
llvm-svn: 365351
Summary of changes:
- simplified handling of FLAT offset: offset_s13 and offset_u12 have been replaced with flat_offset;
- provided information about error position for pre-gfx9 targets;
- improved errors handling.
Reviewers: artem.tamazov, arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D64244
llvm-svn: 365321
Summary:
According to a recently updated Armv8-M spec
(https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf) the
32-bit width versions of the following instructions:
* VQDMLADH
* VQDMLADHX
* VQRDMLADH
* VQRDMLADHX
* VQDMLSDH
* VQDMLSDHX
* VQRDMLSDH
* VQRDMLSDHX
are no longer unpredictable when their output register is the same as
one of the input registers.
This patch updates the assembler parser and the corresponding tests
and also removes @earlyclobber from the instruction constraints.
Reviewers: simon_tatham, ostannard, dmgreen, SjoerdMeijer, samparker
Reviewed By: simon_tatham
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64250
llvm-svn: 365306
Mac Catalyst is a new MachO platform in macOS Catalina.
It always uses the build_version MachO load command.
Differential Revision: https://reviews.llvm.org/D64107
llvm-svn: 364981
Summary:
These are output by clang -S, so can now be roundtripped thru clang.
(partially) fixes: https://bugs.llvm.org/show_bug.cgi?id=34544
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63901
llvm-svn: 364658
Summary:
Assembly of atomic.notify has been fixed in r364576, so we can enable
it.
Reviewers: aardappel
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63898
llvm-svn: 364596
Summary:
- Match the syntax output by InstPrinter.
- Fix it always emitting 0 for align. Had to work around fact that
opcode is not available for GetDefaultP2Align while parsing.
- Updated tests that were erroneously happy with a p2align=0
Fixes https://bugs.llvm.org/show_bug.cgi?id=40752
Reviewers: aheejin, sbc100
Subscribers: jgravelle-google, sunfish, jfb, llvm-commits, dschuff
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63633
llvm-svn: 364570
This was reported in https://bugs.llvm.org/show_bug.cgi?id=41751
llvm-mc aborted when disassembling tabortdc.
This patch try to clean up TM related DAGs.
* Fixes the problem by remove explicit output of cr0, and put it as implicit def.
* Update int_ppc_tbegin pattern to accommodate the implicit def of cr0.
* Update the TCHECK operand and int_ppc_tcheck accordingly.
* Add some builtin test and disassembly tests.
* Remove unused CRRC0/crrc0
Differential Revision: https://reviews.llvm.org/D61935
llvm-svn: 364544
The BF and WLS/WLSTP instructions have various branch-offset fields
occupying different positions and lengths in the instruction encoding,
and all of them were decoded at disassembly time by the function
DecodeBFLabelOffset() which returned SoftFail if the offset was zero.
In fact, it's perfectly fine and not even a SoftFail for most of those
offset fields to be zero. The only one that can't be zero is the 4-bit
field labelled `boff` in the architecture spec, occupying bits {26-23}
of the BF instruction family. If that one is zero, the encoding
overlaps other instructions (WLS, DLS, LETP, VCTP), so it ought to be
a full Fail.
Fixed by adding an extra template parameter to DecodeBFLabelOffset
which controls whether a zero offset is accepted or rejected. Adjusted
existing tests (only in error messages for bad disassemblies); added
extra tests to demonstrate zero offsets being accepted in all the
right places, and a few demonstrating rejection of zero `boff`.
Reviewers: DavidSpickett, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63864
llvm-svn: 364533
Different versions of the Arm architecture disallow the use of generic
coprocessor instructions like MCR and CDP on different sets of
coprocessors. This commit centralises the check of the coprocessor
number so that it's consistent between assembly and disassembly, and
also updates it for the new restrictions in Arm v8.1-M.
New tests added that check all the coprocessor numbers; old tests
updated, where they used a number that's now become illegal in the
context in question.
Reviewers: DavidSpickett, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63863
llvm-svn: 364532
In the `CSEL Rd,Rm,Rn` instruction family (also including CSINC, CSINV
and CSNEG), the architecture lists it as CONSTRAINED UNPREDICTABLE
(i.e. SoftFail) to use SP in the Rd or Rm slot, but outright illegal
to use it in the Rn slot, not least because some encodings of that
form are used by MVE instructions such as UQRSHLL.
MC was treating all three slots the same, as SoftFail. So the only
reason UQRSHLL was disassembled correctly at all was because the MVE
decode table is separate from the Thumb2 one and takes priority; if
you turned off MVE, then encodings such as `[0x5f,0xea,0x0d,0x83]`
would disassemble as spurious CSELs.
Fixed by inventing another version of the `GPRwithZR` register class,
which disallows SP completely instead of just SoftFailing it.
Reviewers: DavidSpickett, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63862
llvm-svn: 364531
Bill Wendling