As discussed on PR24580, this patch adds some (more to come) initial fast-isel codegen tests to match the IR generated in clang/test/CodeGen/sse41-builtins.c
llvm-svn: 261438
Fixed a bug introduced by D16683 when a binary shuffle is simplified to a unary shuffle (with undef/zero sentinel mask indices) - if this resulted in only the second input being used combineX86ShuffleChain failed to take this into account and still referenced the first input.
llvm-svn: 261434
TLSADDR nodes are lowered into actuall calls inside MC. In order to prevent
shrink-wrapping from pushing prologue/epilogue past them (which result
in TLS variables being accessed before the stack frame is set up), we
put markers, so that the stack gets adjusted properly.
Thanks to Quentin Colombet for guidance/help on how to fix this problem!
llvm-svn: 261387
Summary:
Instead of trying to replace SMRD instructions with a VGPR base pointer
with an equivalent MUBUF instruction, we now copy the base pointer to
SGPRs using v_readfirstlane.
This is safe to do, because any load selected as an SMRD instruction
has been proven to have a uniform base pointer, so each thread in the
wave will have the same pointer value in VGPRs.
This will fix some errors on VI from trying to replace SMRD instructions
with addr64-enabled MUBUF instructions that don't exist.
Reviewers: arsenm, cfang, nhaehnle
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17305
llvm-svn: 261385
Summary:
When optimizing for size, sqrt calls can be incorrectly selected as
AVX512 VSQRT instructions. This is because X86InstrAVX512.td has a
`Requires<[OptForSize]>` in its `avx512_sqrt_scalar` multiclass
definition. Even if the target does not support AVX512, the class can
apparently still be chosen, leading to an incorrect selection of
`vsqrtss`.
In PR26625, this lead to an assertion: Reg >= X86::FP0 && Reg <=
X86::FP6 && "Expected FP register!", because the `vsqrtss` instruction
requires an XMM register, which is not available on i686 CPUs.
Reviewers: grosbach, resistor, joker.eph
Subscribers: spatel, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D17414
llvm-svn: 261360
allocateStackSlot did not consider the size of the value to be spilled
before deciding to re-use a spill slot. This was originally okay (since
originally we'd only ever spill pointers), but it became not okay when
we changed our scheme to directly spill vectors of pointers.
While this change fixes the bug pointed out, it has two performance
caveats:
- It matches spill slot and spillee size exactly, while in theory we
can spill, e.g., an 8 byte pointer into a 16 byte slot. This is
slightly complicated to fix since in the stackmaps section, we report
the size of the spill slot as the size of the "indirect value"; and
if they're no longer equivalent, we'll have to keep track of the
(indirect) value size separately from the stack slot size.
- It will "spuriously run out" of reusable slots, since we now have an
second check in the search loop in addition to the availablity
check (e.g. you had two free scalar slots, and you first ask for a
vector slot followed by a scalar slot). I'll fix this in a later
commit.
llvm-svn: 261336
Summary:
This was broken in r260694 which swapped the address and data operands
for flat store instructions. The code in SIInsertWaits assumes
that the data operand always comes before the address operand, so
we need to add a special case for flat.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17366
llvm-svn: 261330
As discussed on PR24580, this patch adds some (more to come) initial fast-isel codegen tests to match the IR generated in clang/test/CodeGen/avx-builtins.c
llvm-svn: 261329
According to the SystemZ ABI, 128-bit integer types should be
passed and returned via implicit reference. However, this is
not currently implemented at the LLVM IR level for the i128
type. This does not matter when compiling C/C++ code, since
clang will implement the implicit reference itself.
However, it turns out that when calling libgcc helper routines
operating on 128-bit integers, LLVM will use i128 argument and
return value types; the resulting code is not compatible with
the ABI used in libgcc, leading to crashes (see PR26559).
This should be simple to fix, except that i128 currently is not
even a legal type for the SystemZ back end. Therefore, common
code will already split arguments and return values into multiple
parts. The bulk of this patch therefore consists of detecting
such parts, and correctly handling passing via implicit reference
of a value split into multiple parts. If at some time in the
future, i128 becomes a legal type, this code can be removed again.
This fixes PR26559.
llvm-svn: 261325
Certain optimization passes (like globaldce) can prune function
declaration that SjLjEHPrepare assumed would exit when it'd
runOnFunction.
This fixes PR26669.
llvm-svn: 261303
Summary:
Without this, this command
$ llvm-run llc -stop-after machine-cp -o - <( echo '' )
outputs an error, because we close stdout twice -- once when closing the
file opened for "-o", and again when closing outs().
Also clarify in the outs() definition that you can't ever call it if you
want to open your own raw_fd_ostream on stdout.
Reviewers: jroelofs, tstellarAMD
Subscribers: jholewinski, qcolombet, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17422
llvm-svn: 261286
If we know that all of our successors want to be in the exact same
state, it makes sense to hoist the state transition into their common
predecessor.
Differential Revision: http://reviews.llvm.org/D17391
llvm-svn: 261262
In r260133, LLVM was changed to no longer extend i8/i16 return values,
as it's not required by the ABI. However, code was found in the wild
that relies on the old behaviour on Darwin, so this commit reverts
back to that old behaviour for Darwin.
On other platforms, it's less likely that code would be depending on
the old behaviour, as GCC and MSVC haven't been extending such return
values.
llvm-svn: 261235
Summary:
These correspond to IMAGE_LOAD/STORE[_MIP] and are going to be used by Mesa
for the GL_ARB_shader_image_load_store extension.
IMAGE_LOAD is already matched by llvm.SI.image.load. That intrinsic has
a legacy name and pretends not to read memory.
Differential Revision: http://reviews.llvm.org/D17276
llvm-svn: 261224
In cases where the PSHUFB shuffle mask is shared it might not be bitcasted to a vXi8 byte vector. This patch adds support for decoding these wider shuffle masks from the ConstantPool.
The test case in question makes use of this to recognise the shuffle mask is an unary UNPCKL pattern and simplifies accordingly.
llvm-svn: 261201
While we still do want reducible control flow, the RequiresStructuredCFG
flag imposes more strict structure constraints than WebAssembly wants.
Unsetting this flag enables critical edge splitting and tail merging.
Also, disable TailDuplication explicitly, as it doesn't support virtual
registers, and was previously only disabled by the RequiresStructuredCFG
flag.
llvm-svn: 261190
After r261154, we were only clearing flags if the known-zero register was
originally live-in to the basic block, but we have to do it even if not when
more than one COPY has been eliminated, otherwise the user of the first COPY
may still have <kill> marked.
E.g.
BB#N:
%X0 = COPY %XZR
STRXui %X0<kill>, <fi#0>
%X0 = COPY %XZR
STRXui %X0<kill>, <fi#1>
We can eliminate both copies, X0 is not live-in, but we must clear the kill on
the first store.
Unfortunately, I've been unable to come up with a non-fragile test for this.
I've only seen it in the wild with regalloc-created spills, and attempts to
reproduce that in a reasonable way run afoul of COPY coalescing. Even volatile
asm clobbers were moved around. Should fix the aarch64 bot though.
llvm-svn: 261175
Mostly, this fixes the bug that if the CBZ guaranteed Xn but Wn was used, we
didn't sort out the use-def chain properly.
I've also made it check more than just the last instruction for a compatible
CBZ (so it can cope without fallthroughs). I'd have liked to do that
separately, but it's helps writing the test.
Finally, I removed some custom loops in favour of MachineInstr helpers and
refactored the control flow to flatten it and avoid possibly quadratic
iterations in blocks with many copies. NFC for these, just a general tidy-up.
llvm-svn: 261154
32-bit x86 Windows targets use a linked-list of nodes allocated on the
stack, referenced to via thread-local storage. The personality routine
interprets one of the fields in the node as a 'state number' which
indicates where the personality routine should transfer control.
State transitions are possible only before call-sites which may throw
exceptions. Our previous scheme had us update the state number before
all call-sites which may throw.
Instead, we can try to minimize the number of times we need to store by
reasoning about the nearest store which dominates the current call-site.
If the last store agrees with the current call-site, then we know that
the state-update is redundant and can be elided.
This is largely straightforward: an RPO walk of the blocks allows us to
correctly forward propagate the information when the function is a DAG.
Currently, loops are not handled optimally and may trigger superfluous
state stores.
Differential Revision: http://reviews.llvm.org/D16763
llvm-svn: 261122
Summary:
The syncthreads MI is modeled as mayread/maywrite -- convergence doesn't
even come into play here. Nonetheless this property is highly implicit
in the tablegen files, so a test seems appropriate.
Reviewers: jingyue
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D17319
llvm-svn: 261114
Summary:
Otherwise we'll try to do unsafe optimizations on these MIs, such as
sinking loads below calls.
(I suspect that this is not the only bug in the NVPTX instruction
tablegen files; I need to comb through them.)
Reviewers: jholewinski, tra
Subscribers: jingyue, jhen, llvm-commits
Differential Revision: http://reviews.llvm.org/D17315
llvm-svn: 261113
We are getting better at combining constant pshufb masks - use a real input instead of undef.
Add test for decoding multi-use bitcasted masks as well (actual support will come soon).
llvm-svn: 261101
Bug description:
The bug was discovered when test was compiled with -O0.
In case scatter result is DAG root , VectorLegalizer failed (assert) due to LowerMSCATTER() return kmask as result.
Change LowerMSCATTER() to return chain as original node do.
Differential Revision: http://reviews.llvm.org/D17331
llvm-svn: 261090
AVX1 doesn't support the shuffling of 256-bit integer vectors. For 32/64-bit elements we get around this by shuffling as float/double but for 8/16-bit elements (assuming they can't widen) we currently just split, shuffle as 128-bit vectors and concatenate the results back.
This patch adds the ability to lower using the bit-blend patterns before defaulting to the splitting behaviour.
Part 2 of 2
Differential Revision: http://reviews.llvm.org/D17292
llvm-svn: 261082
AVX1 doesn't support the shuffling of 256-bit integer vectors. For 32/64-bit elements we get around this by shuffling as float/double but for 8/16-bit elements (assuming they can't widen) we currently just split, shuffle as 128-bit vectors and concatenate the results back.
This patch adds the ability to lower using the bit-mask patterns before defaulting to the splitting behaviour. In some cases this ends up matching what AVX2 would do anyhow or what AVX1 does on the split vectors.
Part 1 of 2
Differential Revision: http://reviews.llvm.org/D17292
llvm-svn: 261081
This patch detects vector reductions before instruction selection. Vector
reductions are vectorized reduction operations, and for such operations we have
freedom to reorganize the elements of the result as long as the reduction of them
stay unchanged. This will enable some reduction pattern recognition during
instruction combine such as SAD/dot-product on X86. A flag is added to
SDNodeFlags to mark those vector reduction nodes to be checked during instruction
combine.
To detect those vector reductions, we search def-use chains starting from the
given instruction, and check if all uses fall into two categories:
1. Reduction with another vector.
2. Reduction on all elements.
in which 2 is detected by recognizing the pattern that the loop vectorizer
generates to reduce all elements in the vector outside of the loop, which
includes several ShuffleVector and one ExtractElement instructions.
Differential revision: http://reviews.llvm.org/D15250
llvm-svn: 261070
This fixes very slow compilation on
test/CodeGen/Generic/2010-11-04-BigByval.ll . Note that MaxStoresPerMemcpy
and friends are not yet carefully tuned so the cutoff point is currently
somewhat arbitrary. However, it's important that there be a cutoff point
so that we don't emit unbounded quantities of loads and stores.
llvm-svn: 261050
__chkstk clobbers EAX. If EAX is live across the prologue, then we have
to take extra steps to save it. We already had code to do this if EAX
was a register parameter. This change adapts it to work when shrink
wrapping is used.
llvm-svn: 261039
Currently, we sometimes miscompile this vector pattern:
(c ? -v : v)
We lower it to (because "c" is <4 x i1>, lowered as a vector mask):
(~c & v) | (c & -v)
When we have SSSE3, we incorrectly lower that to PSIGN, which does:
(c < 0 ? -v : c > 0 ? v : 0)
in other words, when c is either all-ones or all-zero:
(c ? -v : 0)
While this is an old bug, it rarely triggers because the PSIGN combine
is too sensitive to operand order. This will be improved separately.
Note that the PSIGN tests are also incorrect. Consider:
%b.lobit = ashr <4 x i32> %b, <i32 31, i32 31, i32 31, i32 31>
%sub = sub nsw <4 x i32> zeroinitializer, %a
%0 = xor <4 x i32> %b.lobit, <i32 -1, i32 -1, i32 -1, i32 -1>
%1 = and <4 x i32> %a, %0
%2 = and <4 x i32> %b.lobit, %sub
%cond = or <4 x i32> %1, %2
ret <4 x i32> %cond
if %b is zero:
%b.lobit = <4 x i32> zeroinitializer
%sub = sub nsw <4 x i32> zeroinitializer, %a
%0 = <4 x i32> <i32 -1, i32 -1, i32 -1, i32 -1>
%1 = <4 x i32> %a
%2 = <4 x i32> zeroinitializer
%cond = or <4 x i32> %a, zeroinitializer
ret <4 x i32> %a
whereas we currently generate:
psignd %xmm1, %xmm0
retq
which returns 0, as %xmm1 is 0.
Instead, use a pure logic sequence, as described in:
https://graphics.stanford.edu/~seander/bithacks.html#ConditionalNegate
Fixes PR26110.
Differential Revision: http://reviews.llvm.org/D17181
llvm-svn: 261023
We're going to stop generating PSIGN, so calling a test "psign"
isn't ideal. Instead, call these tests what they really are:
variable blends using logic.
Also add a test to exhibit a case we're currently missing in
the PSIGN combine.
llvm-svn: 261022
The register stackifier currently checks for intervening stores (and
loads that may alias them) but doesn't account for the fact that the
instruction being moved may affect intervening loads.
Differential Revision: http://reviews.llvm.org/D17298
llvm-svn: 261014
Summary:
This change will add a pass to remove unnecessary zero copies in target blocks
of cbz/cbnz instructions. E.g., the copy instruction in the code below can be
removed because the cbz jumps to BB1 when x0 is zero :
BB0:
cbz x0, .BB1
BB1:
mov x0, xzr
Jun
Reviewers: gberry, jmolloy, HaoLiu, MatzeB, mcrosier
Subscribers: mcrosier, mssimpso, haicheng, bmakam, llvm-commits, aemerson, rengolin
Differential Revision: http://reviews.llvm.org/D16203
llvm-svn: 261004
CopyToReg nodes don't support FrameIndex operands. Other targets select
the FI to some LEA-like instruction, but since we don't have that, we
need to insert some kind of instruction that can take an FI operand and
produces a value usable by CopyToReg (i.e. in a vreg). So insert a dummy
copy_local between Op and its FI operand. This results in a redundant
copy which we should optimize away later (maybe in the post-FI-lowering
peephole pass).
Differential Revision: http://reviews.llvm.org/D17213
llvm-svn: 260987
WebAssembly doesn't require full RPO; topological sorting is sufficient and
can preserve more of the MachineBlockPlacement ordering. Unfortunately, this
still depends a lot on heuristics, because while we use the
MachineBlockPlacement ordering as a guide, we can't use it in places where
it isn't topologically ordered. This area will require further attention.
llvm-svn: 260978
This avoids some complications updating LiveIntervals to be aware of the new
register lifetimes, because we can just compute new intervals from scratch
rather than describe how the old ones have been changed.
llvm-svn: 260971
If KMOVB not supported (require AVX512DQ) only KMOVW can be used so store size should be 2 bytes.
Differential Revision: http://reviews.llvm.org/D17138
llvm-svn: 260878
This patch attempts to represent a shuffle as a repeating shuffle (recognisable by is128BitLaneRepeatedShuffleMask) with the source input(s) in their original lanes, followed by a single permutation of the 128-bit lanes to their final destinations.
On AVX2 we can additionally attempt to match using 64-bit sub-lane permutation. AVX2 can also now match a similar 'broadcasted' repeating shuffle.
This patch has several benefits:
* Avoids prematurely matching with lowerVectorShuffleByMerging128BitLanes which can require both inputs to have their input lanes permuted before shuffling.
* Can replace PERMPS/PERMD instructions - although these are useful for cross-lane unary shuffling, they require their shuffle mask to be pre-loaded (and increase register pressure).
* Matching the repeating shuffle makes use of a lot of existing shuffle lowering.
There is an outstanding minor AVX1 regression (combine_unneeded_subvector1 in vector-shuffle-combining.ll) of a previously 128-bit shuffle + subvector splat being converted to a subvector splat + (2 instruction) 256-bit shuffle, I intend to fix this in a followup patch for review.
Differential Revision: http://reviews.llvm.org/D16537
llvm-svn: 260834
As shown in:
https://llvm.org/bugs/show_bug.cgi?id=23203
...we currently die because lowering believes that mfence is allowed without SSE2 on x86-64,
but the instruction def doesn't know that.
I don't know if allowing mfence without SSE is right, but if not, at least now it's consistently wrong. :)
Differential Revision: http://reviews.llvm.org/D17219
llvm-svn: 260828
Tests for the new scalarize all private access options will be
included with a future commit.
The only functional change is to make the split/scalarize behavior
for private access of > 4 element vectors to be consistent
with the flat/global handling. This makes the spilling worse
in the two changed tests.
llvm-svn: 260804
Summary:
This patch skips DAG combine of fp_round (fp_round x) if it results in
an fp_round from f80 to f16.
fp_round from f80 to f16 always generates an expensive (and as yet,
unimplemented) libcall to __truncxfhf2. This prevents selection of
native f16 conversion instructions from f32 or f64. Moreover, the first
(value-preserving) fp_round from f80 to either f32 or f64 may become a
NOP in platforms like x86.
Reviewers: ab
Subscribers: srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D17221
llvm-svn: 260769
Replace spills to memory with spills to registers, if possible. This
applies mostly to predicate registers (both scalar and vector), since
they are very limited in number. A spill of a predicate register may
happen even if there is a general-purpose register available. In cases
like this the stack spill/reload may be eliminated completely.
This optimization will consider all stack objects, regardless of where
they came from and try to match the live range of the stack slot with
a dead range of a register from an appropriate register class.
llvm-svn: 260758
Rewrite the code to handle all pseudo-instructions in a single pass.
This temporarily reverts spill slot optimization that used general-
purpose registers to hold values of spilled predicate registers.
llvm-svn: 260696
Historically, AMD internal sp3 assembler has flat_store* addr, data
format. To match existing code and to enable reuse, change LLVM
definitions to match. Also update MC and CodeGen tests.
Differential Revision: http://reviews.llvm.org/D16927
Patch by: Nikolay Haustov
llvm-svn: 260694
Summary:
It is possible that the loop condition can be a boolean constant (infinite loop,
for example). So we sould handle constant condition in annotating a loop. This
patch adds this functionality to support annotating constant condition.
Reviewers: tstellarAMD, arsenm
Subscribers: llvm-commits, arsenm
Differential Revision: http://reviews.llvm.org/D15093
llvm-svn: 260692
We can generate the actual instructions from the intrinsics without the
need for pseudo-instructions. Also, since the intrinsics have a side-
effect in a form of a store, attempt to optimize away loads from the
store location.
llvm-svn: 260690
Summary:
Before this change, callee-save registers would be rounded up to even
pairs of GPRs and FPRs. This change eliminates these extra padding
load/stores, though it does keep the stack allocation the same size
unless both the GPR and FPR sets have an odd size, in which case one
full pair stack slot (16 bytes) is saved.
This optimization cannot currently be done for MachO targets since they
rely on a fast-path .debug_frame equivalent that can only encode
callee-save registers as pairs.
Reviewers: t.p.northover, rengolin, mcrosier, jmolloy
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17000
llvm-svn: 260689
The DataLayout can calculate alignment of vectors based on the alignment
of the element type and the number of elements. In fact, it is the product
of these two values. The problem is that for vectors of N x i1, this will
return the alignment of N bytes, since the alignment of i1 is 8 bits. The
vector types of vNi1 should be aligned to N bits instead. Provide explicit
alignment for HVX vectors to avoid such complications.
llvm-svn: 260678
This was hardcoded to the static private size, but this
would be missing the offset and additional size for someday
when we have dynamic sizing.
Also stops always initializing flat_scratch even when unused.
In the future we should stop emitting this unless flat instructions
are used to access private memory. For example this will initialize
it almost always on VI because flat is used for global access.
llvm-svn: 260658
Introduce a subtarget feature for this, and leave the default with
the current behavior which assumes up to 16-byte loads/stores can
be used. The field also seems to have the ability to be set to 2 bytes,
but I'm not sure what that would be used for.
llvm-svn: 260651
Summary:
It's possible to have resource descriptors and samplers stored in
VGPRs, either by a VMEM instruction or in the case of samplers,
floating-point calculations. When this happens, we need to use
v_readfirstlane to copy these values back to sgprs.
Reviewers: mareko, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17102
llvm-svn: 260599
The code change is simple enough: instead of attaching an anonymous SDLoc to splatted
vector constants, use the scalar constant's existing SDLoc since that is what is passed
into getConstant() as a param. But this changes instruction scheduling, so I'll explain
why that happens.
The motivation for this patch starts near:
http://reviews.llvm.org/rL258833
...x86's getZeroVector() could be similarly cleaned up and I thought it would be 'NFC'.
But when I made that change locally, several x86 codegen tests wiggled.
It turns out that the lack of SDLoc consistency in getConstant() changes the way
ScheduleDAGRRList behaves. This is because the SDLoc contains 'IROrder' and some DAG
scheduler algorithms use IROrder for tie-breaking.
Differential Revision: http://reviews.llvm.org/D16972
llvm-svn: 260582
This patch allows the mixing of scaled and unscaled load/stores to form
load/store pairs.
This is a reapplication of r259812, which had an incorrect assert. The
test_stur_str_no_assert() test is a reduced version of the issue hit in
the AArch64 self-host.
PR24465
llvm-svn: 260523
If the two operands to an instruction were both
subregisters of the same super register, it would incorrectly
think this counted as the same constant bus use.
This fixes the verifier error in fmin_legacy.ll which
was missing -verify-machineinstrs.
llvm-svn: 260495
Summary:
This fixes a crash where subsequent spills would be unable to scavenge
a register. In particular, it fixes a crash in piglit's
spec@glsl-1.50@execution@geometry@max-input-components (the test still
has a shader that fails to compile because of too many SGPR spills, but
at least it doesn't crash any more).
This is a candidate for the release branch.
Reviewers: arsenm, tstellarAMD
Subscribers: qcolombet, arsenm
Differential Revision: http://reviews.llvm.org/D16558
llvm-svn: 260427
Instead of passing varargs directly on the user stack, allocate a buffer in
the caller's stack frame and pass a pointer to it. This simplifies the C
ABI (e.g. non-C callers of C functions do not need to use C's user stack if
they have their own mechanism) and allows further optimizations in the future
(e.g. fewer functions may need to use the stack).
Differential Revision: http://reviews.llvm.org/D17048
llvm-svn: 260421
Summary:
Fix case where a pre-inc/dec load/store would not be formed if the
add/sub that forms the inc/dec part of the operation was the first
instruction in the block being examined.
Reviewers: mcrosier, jmolloy, t.p.northover, junbuml
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D16785
llvm-svn: 260275
On AVX2 target we are poorly legalizing SIGN_EXTEND ops for which the input's legalized type doesn't have the same number of elements as the destination, resulting in an ANY_EXTEND followed by a SIGN_EXTEND_INREG.
This patch uses the existing SIGN_EXTEND -> SIGN_EXTEND_VECTOR_INREG combine to extend the input to the size of the result and using SIGN_EXTEND_VECTOR_INREG instead.
Differential Revision: http://reviews.llvm.org/D16994
llvm-svn: 260210
As discussed on PR26491, this patch adds support for lowering v4f32 shuffles to the MOVLHPS/MOVHLPS instructions. It also adds support for memory folding with their MOVLPS/MOVHPS load equivalents.
This first patch only really helps SSE1 targets as SSE2+ targets will widen the shuffle mask and use v2f64 equivalents (although they still combine to MOVLHPS/MOVHLPS for v2f64 splats). This will have to be addressed in a future patch, most likely when we add support for binary target shuffle combines.
Differential Revision: http://reviews.llvm.org/D16956
llvm-svn: 260168
Another opportunity to reduce masked stores: in D16691, we decided not to attempt the 'one mask element is set'
transform in InstCombine, but this should be a win for any AVX machine.
Code comments note that this transform could be extended for other targets / cases.
Differential Revision: http://reviews.llvm.org/D16828
llvm-svn: 260145
This matches GCC and MSVC's behaviour, and saves on code size.
We were already not extending i1 return values on x86_64 after r127766. This
takes that patch further by applying it to x86 target as well, and also for i8
and i16.
The ABI docs have been unclear about the required behaviour here. The new i386
psABI [1] clearly states (Table 2.4, page 14) that i1, i8, and i16 return
vales do not need to be extended beyond 8 bits. The x86_64 ABI doc is being
updated to say the same [2].
Differential Revision: http://reviews.llvm.org/D16907
[1]. https://01.org/sites/default/files/file_attach/intel386-psabi-1.0.pdf
[2]. https://groups.google.com/d/msg/x86-64-abi/E8O33onbnGQ/_RFWw_ixDQAJ
llvm-svn: 260133
If a range has a lower bound of 0, add an AssertZext from the
nearest floor power of two.
This allows operations with some workitem intrinsics with known
maximum ranges to use fast 24-bit multiplies.
llvm-svn: 260109
The combineX86ShufflesRecursively only supports unary shuffles, but was missing the opportunity to combine binary shuffles with a zero / undef second input.
This patch resolves target shuffle inputs, converting the shuffle mask elements to SM_SentinelUndef/SM_SentinelZero where possible. It then resolves the updated mask to check if we have created a faux unary shuffle.
Additionally, we now attempt to recursively call combineX86ShufflesRecursively for all input operands (we used to just recurse for unary integer shuffles and unary unpacks) - it safely returns early if its not a target shuffle.
Differential Revision: http://reviews.llvm.org/D16683
llvm-svn: 260063
The current situation isn't great, because the amount of padding
requires is determined by the inverse order of the first encountered
use. We should eventually somehow sort these to minimize wasted space.
Another problem is the alignment of kernel arguments isn't
respected. The group_segment_alignment is always emitted as
the default 16, and typed arguments with higher alignments
or an explicitly set alignment are also ignored.
llvm-svn: 259912
LiveRangeEdit::eliminateDeadDef is used to remove dead define instructions
after rematerialization. To remove a VNI for a vreg from its LiveInterval,
LiveIntervals::removeVRegDefAt is used. However, after non-PHI VNIs are all
removed, PHI VNI are still left in the LiveInterval. Such unused vregs will
be kept in RegsToSpill[] at the end of InlineSpiller::reMaterializeAll and
spiller will allocate stackslot for them.
The fix is to get rid of unused reg by checking whether it has non-dbg
reference instead of whether it has non-empty interval.
llvm-svn: 259895
Using the load immediate only when the immediate (whether signed or unsigned)
can fit in a 16-bit signed field. Namely, from -32768 to 32767 for signed and
0 to 65535 for unsigned. This patch also ensures that we sign-extend under the
right conditions.
llvm-svn: 259840
Choose between MOVD/MOVSS and MOVQ/MOVSD depending on the target vector type.
This has a lot fewer test changes than trying to add this to X86InstrInfo::setExecutionDomain.....
llvm-svn: 259816
This patch allows the mixing of scaled and unscaled load/stores to form
load/store pairs.
PR24465
http://reviews.llvm.org/D12116
Many thanks to Ahmed and Michael for fixes and code review.
This is a reapplication of r246769 and r259790. The tramp3d failure was caused
by an incorrect refactoring in the patch. Specifically, we weren't always
properly clearing the SExtIdx flag.
llvm-svn: 259812
During instruction selection, the AArch64 backend can recognise the
following pattern and generate an [U|S]MADDL instruction, i.e. a
multiply of two 32-bit operands with a 64-bit result:
(mul (sext i32), (sext i32))
However, when one of the operands is constant, the sign extension
gets folded into the constant in SelectionDAG::getNode(). This means
that the instruction selection sees this:
(mul (sext i32), i64)
...which doesn't match the pattern. Sign-extension and 64-bit
multiply instructions are generated, which are slower than one 32-bit
multiply.
Add a pattern to match this and generate the correct instruction, for
both signed and unsigned multiplies.
Patch by Chris Diamand!
llvm-svn: 259800
Fix the lit bug that enabled this "feature" (empty triple is substring
of all possible target triples) and change the two outliers to use the
documented * syntax.
llvm-svn: 259799
This patch adds support for consecutive (load/undef elements) 32-bit loads, followed by trailing undef/zero elements to be combined to a single MOVD load.
Differential Revision: http://reviews.llvm.org/D16729
llvm-svn: 259796
This patch implements softening of long double type (ppcf128) on ppc32
architecture and enables operations for this type for soft float.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D15811
llvm-svn: 259791
This patch allows the mixing of scaled and unscaled load/stores to form
load/store pairs.
PR24465
http://reviews.llvm.org/D12116
Many thanks to Ahmed and Michael for fixes and code review.
This is a reapplication of r246769, which was reverted in r246782 due to a
test-suite failure. I'm unable to reproduce the issue at this time.
llvm-svn: 259790
Current SCEV expansion will expand SCEV as a sequence of operations
and doesn't utilize the value already existed. This will introduce
redundent computation which may not be cleaned up throughly by
following optimizations.
This patch introduces an ExprValueMap which is a map from SCEV to the
set of equal values with the same SCEV. When a SCEV is expanded, the
set of values is checked and reused whenever possible before generating
a sequence of operations.
The original commit triggered regressions in Polly tests. The regressions
exposed two problems which have been fixed in current version.
1. Polly will generate a new function based on the old one. To generate an
instruction for the new function, it builds SCEV for the old instruction,
applies some tranformation on the SCEV generated, then expands the transformed
SCEV and insert the expanded value into new function. Because SCEV expansion
may reuse value cached in ExprValueMap, the value in old function may be
inserted into new function, which is wrong.
In SCEVExpander::expand, there is a logic to check the cached value to
be used should dominate the insertion point. However, for the above
case, the check always passes. That is because the insertion point is
in a new function, which is unreachable from the old function. However
for unreachable node, DominatorTreeBase::dominates thinks it will be
dominated by any other node.
The fix is to simply add a check that the cached value to be used in
expansion should be in the same function as the insertion point instruction.
2. When the SCEV is of scConstant type, expanding it directly is cheaper than
reusing a normal value cached. Although in the cached value set in ExprValueMap,
there is a Constant type value, but it is not easy to find it out -- the cached
Value set is not sorted according to the potential cost. Existing reuse logic
in SCEVExpander::expand simply chooses the first legal element from the cached
value set.
The fix is that when the SCEV is of scConstant type, don't try the reuse
logic. simply expand it.
Differential Revision: http://reviews.llvm.org/D12090
llvm-svn: 259736
This patch consists of two parts: a performance fix in DAGCombiner.cpp
and a correctness fix in SelectionDAG.cpp.
The test case tests the bug that's uncovered by the performance fix, and
fixed by the correctness fix.
The performance fix keeps the containers required by the
hasPredecessorHelper (which is a lazy DFS) and reuse them. Since
hasPredecessorHelper is called in a loop, the overall efficiency reduced
from O(n^2) to O(n), where n is the number of SDNodes.
The correctness fix keeps iterating the neighbor list even if it's time
to early return. It will return after finishing adding all neighbors to
Worklist, so that no neighbors are discarded due to the original early
return.
llvm-svn: 259691
Add support for TLS access for Windows on ARM. This generates a similar access
to MSVC for ARM.
The changes to the tablegen data is needed to support loading an external symbol
global that is not for a call. The adjustments to the DAG to DAG transforms are
needed to preserve the 32-bit move.
llvm-svn: 259676
Recommited, after some fixing with test cases.
Updated test cases:
test/CodeGen/AArch64/arm64-misched-memdep-bug.ll
test/CodeGen/AArch64/tailcall_misched_graph.ll
Temporarily disabled test cases:
test/CodeGen/AMDGPU/split-vector-memoperand-offsets.ll
test/CodeGen/PowerPC/ppc64-fastcc.ll (partially updated)
test/CodeGen/PowerPC/vsx-fma-m.ll
test/CodeGen/PowerPC/vsx-fma-sp.ll
http://reviews.llvm.org/D8705
Reviewers: Hal Finkel, Andy Trick.
llvm-svn: 259673
Current SCEV expansion will expand SCEV as a sequence of operations
and doesn't utilize the value already existed. This will introduce
redundent computation which may not be cleaned up throughly by
following optimizations.
This patch introduces an ExprValueMap which is a map from SCEV to the
set of equal values with the same SCEV. When a SCEV is expanded, the
set of values is checked and reused whenever possible before generating
a sequence of operations.
Differential Revision: http://reviews.llvm.org/D12090
llvm-svn: 259662
The GNU toolchain emits __aeabi_divmod for soft-divide on ARM cores
which happens to be a lot faster than __divsi3/__modsi3 when the core
has hardware divide instructions. Do the same here.
Fixes PR26450.
llvm-svn: 259657
MIPS ABI states that .sbss and .sdata sections must have SHF_MIPS_GPREL
flag. See Figure 4–7 on page 69 in the following document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf.
Differential Revision: http://reviews.llvm.org/D15740
llvm-svn: 259641
Follow up to D16217 and D16729
This change uncovered an odd pattern where VZEXT_LOAD v4i64 was being lowered to a load of the lower v2i64 (so the 2nd i64 destination element wasn't being zeroed), I can't find any use/reason for this and have removed the pattern and replaced it so only the 1st i64 element is loaded and the upper bits all zeroed. This matches the description for X86ISD::VZEXT_LOAD
Differential Revision: http://reviews.llvm.org/D16768
llvm-svn: 259635
The purpose of PPCVSXFMAMutate is to elide copies by changing FMA forms
on PPC.
%vreg6<def> = COPY %vreg96
%vreg6<def,tied1> = XSMADDASP %vreg6<tied0>, %vreg5<kill>, %vreg7
;v6 = v6 + v5 * v7
is replaced by
%vreg5<def,tied1> = XSMADDMSP %vreg5<tied0>, %vreg7, %vreg96
;v5 = v5 * v7 + v96
This was broken in the case where the target register was also used as a
multiplicand. Fix this case by checking for it and replacing both uses
with the copied register.
%vreg6<def> = COPY %vreg96
%vreg6<def,tied1> = XSMADDASP %vreg6<tied0>, %vreg5<kill>, %vreg6
;v6 = v6 + v5 * v6
is replaced by
%vreg5<def,tied1> = XSMADDMSP %vreg5<tied0>, %vreg96, %vreg96
;v5 = v5 * v96 + v96
llvm-svn: 259617
If we can't assume the pointer value isn't within the bounds
of the object, it seems risky to try to replace the pointer
calculations.
llvm-svn: 259573
When promoting allocas to LDS, we know we are indexing
into a specific area just created, and the calculation
will also never overflow.
Also emit some of the muls as nsw nuw, because instcombine
infers this already from the range metadata. I think
putting this on the other adds and muls might be OK too,
but I'm not 100% sure.
llvm-svn: 259545
Re-commit of r258951 after fixing layering violation.
The BPF and WebAssembly backends had identical code for emitting errors
for unsupported features, and AMDGPU had very similar code. This merges
them all into one DiagnosticInfo subclass, that can be used by any
backend.
There should be minimal functional changes here, but some AMDGPU tests
have been updated for the new format of errors (it used a slightly
different format to BPF and WebAssembly). The AMDGPU error messages will
now benefit from having precise source locations when debug info is
available.
llvm-svn: 259498
description and changed the regression test accordingly.
The default configuration of a Cortex-R7 is to implement the
VFPv3-D16 architecture and the feature line as it was is too
restrictive.
llvm-svn: 259480
When rematerializing a computation by replacing the copy, use the copy's
location. The location of the copy is more representative of the
original program.
This partially fixes PR10003.
llvm-svn: 259469
Fix a crash in `getMemOpBaseRegImmOfs` that happens if the base of
`MemOp` is a frame index memory operand. The fix is to have
`getMemOpBaseRegImmOfs` bail out in such cases. We can possibly be more
clever here, if needed.
llvm-svn: 259456
Officially, we don't acknowledge non-default configurations of MXCSR,
as getting there would require usage of the FENV_ACCESS pragma (at
least insofar as rounding mode is concerned).
We don't support the pragma, so we can assume that the default
rounding mode - round to nearest, ties to even - is always used.
However, it's inconsistent with the rest of the instruction set,
where MXCSR is always effective (unless otherwise specified).
Also, it's an unnecessary obstacle to the few brave souls that use
fenv.h with LLVM.
Avoid the hard-coded rounding mode for fp_to_f16; use MXCSR instead.
llvm-svn: 259448
Summary:
This is an extension to the existing implementation of r242436 which
restricts to only select inputs. This version fixes missed opportunities
in pr26084 by attempting to lower conditional compare sequences of
and/or trees with setcc leafs. This will additionaly handle the case
when a tree with select input is not a conjunction-disjunction tree
but some of the sub trees are conjunction-disjunction trees.
Reviewers: jmolloy, t.p.northover, mcrosier, MatzeB
Subscribers: mcrosier, llvm-commits, junbuml, haicheng, mssimpso, gberry
Differential Revision: http://reviews.llvm.org/D16291
llvm-svn: 259387
We've found another bug in the code generation logic conditions for a
certain class of always-false conditions, those of the form
if ((a & 1) < 0)
These only reach the back end when compiling without optimization.
The bug was introduced by the choice of using TEST UNDER MASK
to implement a check for
if ((a & MASK) < VAL)
as
if ((a & MASK) == 0)
where VAL is less than the the lowest bit of MASK. This is correct
in all cases except for VAL == 0, in which case the original
condition is always false, but the replacement isn't.
Fixed by excluding that particular case.
llvm-svn: 259381
Remove the old select.ll file and use select-int.ll, select-flt.ll,
select-dbl.ll for testing selects on integers, floats & doubles respectivelly.
llvm-svn: 259361
Minor patch to trace back through target shuffles to the source of the inserted element in a (V)INSERTPS shuffle.
Differential Revision: http://reviews.llvm.org/D16652
llvm-svn: 259343
Those commits created an artificial edge from a cleanup to a synthesized
catchswitch in order to get the MSVC personality routine to execute
cleanups which don't cleanupret and are not wrapped by a catchswitch.
This worked well enough but is not a complete solution in situations
where there the cleanup infinite loops.
However, the real deal breaker behind this approach comes about from a
degenerate case where the cleanup is post-dominated by unreachable *and*
throws an exception. This ends poorly because the catchswitch will
inadvertently catch the exception.
Because of this we should go back to our previous behavior of not
executing certain cleanups (identical behavior with the Itanium ABI
implementation in clang, GCC and ICC).
N.B. I think this could be salvaged by making the catchpad rethrow the
exception and properly transforming throwing calls in the cleanup into
invokes.
llvm-svn: 259338
Previously the code assumed all uses of FI on loads and stores were as
addresses. This checks whether the use is the address or a value and
handles the latter case as it does for non-memory instructions.
llvm-svn: 259306
Derek Schuff