Add a testcase that checks wheter the runtime can handle an ompt_start_tool
method that returns NULL indicating that no tool shall be loaded.
All tool_available testcases need a separate folder to avoid file conflicts for
the generated tools.
Differential Revision: https://reviews.llvm.org/D41904
llvm-svn: 324587
Use fuzzy return addresses in lock testcases so that these
testcases can also be run using the Intel Compiler.
Patch by Simon Convent!
Differential Revision: https://reviews.llvm.org/D41896
llvm-svn: 323529
Add Workaround for Intel Compiler Bug with Case#: 03138964
A critical region within a nested task causes a segfault in icc 14-18:
int main()
{
#pragma omp parallel num_threads(2)
#pragma omp master
#pragma omp task
#pragma omp task
#pragma omp critical
printf("test\n");
}
When the critical region is in a separate function, the segault does not occur.
So we add noinline to make sure that the function call stays there.
Differential Revision: https://reviews.llvm.org/D41182
llvm-svn: 322622
When the current thread is not an (initialized) OpenMP thread, the runtime
entry points return values that correspond to "not available" or similar
Differential Revision: https://reviews.llvm.org/D41167
llvm-svn: 322620
As for normal task creation, the task frame addresses need to be stored
for the encountering task.
Differential Revision: https://reviews.llvm.org/D41165
llvm-svn: 321421
The compiler warns that _BSD_SOURCE is deprecated and _DEFAULT_SOURCE should
be used instead. We keep _BSD_SOURCE for older compilers, that don't know
about _DEFAULT_SOURCE.
The linker drops the tool when linking, since there is no visible need for
the library. So we need to tell the linker, that the tool should be linked
anyway.
Differential Revision: https://reviews.llvm.org/D41499
llvm-svn: 321362
This function is defined in OpenMP-TR6 section 4.1.5.1.6
The functions was not implemented yet.
Since ompt-functions can only be called after the runtime was initialized and
has loaded a tool, it can assume the runtime to be initialized. In contrast
to omp_get_num_procs which needs to check whether the runtime is initialized.
Differential Revision: https://reviews.llvm.org/D40949
llvm-svn: 321269
This revision fixes failing testcases with parallel for loops and the gomp
interface. The return address needs to be stored at entry to runtime.
The storage is cleared on usage, so we need to update the storage before
calling again internal functions, that will trigger event callbacks.
Differential Revision: https://reviews.llvm.org/D41181
llvm-svn: 321265
Clang 5 or higher adds an intermediate function call in certain cases when
compiling with debug flag. This revision updates the testcases to work
correctly.
Differential Revision: https://reviews.llvm.org/D40595
llvm-svn: 321263
Reasons for expected failures are mainly bugs when using lables in OpenMP regions
or missing support of some OpenMP features.
For some worksharing clauses, support to distinguish the kind of workshare was
added just recently.
If an issue was fixed in a minor release version of a compiler, we flag the
test as unsupported for this compiler version to avoid false positives.
Same for fixes that where backported to older compiler versions.
Differential Revision: https://reviews.llvm.org/D40384
llvm-svn: 321262
The code for the two OpenMP runtime libraries was very similar.
Move to common CMake file that is included and provides a simple
interface for adding testsuites. Also add a common check-openmp
target that runs all testsuites that have been registered.
Note that this renames all test options to the common OPENMP
namespace, for example OPENMP_TEST_C_COMPILER instead of
LIBOMP_TEST_COMPILER and so on.
Differential Revision: https://reviews.llvm.org/D40082
llvm-svn: 319343
These tests were failing rarely on my MacBook when there was some
activity in the background. Read: one of a thousand executions?
* sections.c missed the sorting based on thread ids. This worked
as long as the master thread finished its section before the
worker thread started the second one but failed if the master
thread was put to sleep by the OS.
* The checks in single.c assumed that the master thread executes
the single region which works most of the time because it is
usually faster than the newly spawned worker thread.
Differential Revision: https://reviews.llvm.org/D39853
llvm-svn: 318527
Traditionally, the library had a weak symbol for ompt_start_tool()
that served as fallback and disabled OMPT if called. Tools could
provide their own version and replace the default implementation
to register callbacks and lookup functions. This mechanism has
worked reasonably well on Linux systems where this interface was
initially developed.
On Darwin / Mac OS X the situation is a bit more complicated and
the weak symbol doesn't work out-of-the-box. In my tests, the
library with the tool needed to link against the OpenMP runtime
to make the process work. This would effectively mean that a tool
needed to choose a runtime library whereas one design goal of the
interface was to allow tools that are agnostic of the runtime.
The solution is to use dlsym() with the argument RTLD_DEFAULT so
that static implementations of ompt_start_tool() are found in the
main executable. This works because the linker on Mac OS X includes
all symbols of an executable in the global symbol table by default.
To use the same code path on Linux, the application would need to
be built with -Wl,--export-dynamic. To avoid this restriction, we
continue to use weak symbols on Linux systems as before.
Finally this patch extends the existing test to cover all possible
ways of initializing the tool as described by the standard. It
also fixes ompt_finalize() to not call omp_get_thread_num() when
the library is shut down which resulted in hangs on Darwin.
The changes have been tested on Linux to make sure that it passes
the current tests as well as the newly extended one.
Differential Revision: https://reviews.llvm.org/D39801
llvm-svn: 317980
If a parallel region is cancelled, execution resumes at the end
of the structured block. That is why this test cannot use the
"normal" macros that print right after inserting the label.
Instead it previously printed the addresses before the pragma
and swapped the checks compared to the other tests.
However, this does not work because FileChecks '*' is greedy
so that RETURN_ADDRESS always matched the second address. This
makes the test fail when an "overflow" occurrs and the first
address matches the value of codeptr_ra.
I discovered this on my MacBook but I'm unable to reproduce the
failure with the current version. Nevertheless we should fix this
problem to avoid that this test fails later after an unrelated change.
Differential Revision: https://reviews.llvm.org/D39708
llvm-svn: 317787
Return addresses are determined based on the address of a label
that is inserted directly after a pragma / API call. In some cases
the tests can assume a known number of instructions between the
addresses. However, the instructions and their encoded lengths
depend on the target that the test is compiled on.
Firstly, this patch refactors the macro print_current_address() to
allow such target dependent modifications and adds information for
the observed instructions on POWER. Secondly, it adapts the related
macro print_fuzzy_address() to reuse much of "hacky" code and fixes
the used formatting strings in the printf() call. Finally, it also
adds documentation about how these macros are intended to work.
Differential Revision: https://reviews.llvm.org/D39699
llvm-svn: 317786
The TR6 document is expected to be publically released around November 15.
This patch does not implement OMPT for libomptarget.
Patch by Simon Convent and Joachim Protze
Differential Revision: https://reviews.llvm.org/D39182
llvm-svn: 317436
This is part of the renaming of data types from OpenMP TR4 to TR6
Patch by Simon Convent
Differential Revision: https://reviews.llvm.org/D39326
llvm-svn: 317435
The TR6 document is expected to be publically released around November 15.
This patch does not implement OMPT for libomptarget.
Patch by Simon Convent and Joachim Protze
Differential Revision: https://reviews.llvm.org/D39182
llvm-svn: 317339
This is part of the renaming of data types from OpenMP TR4 to TR6
Patch by Simon Convent
Differential Revision: https://reviews.llvm.org/D39326
llvm-svn: 317338
The code is tested to work with latest clang, GNU and Intel compiler. The implementation
is optimized for low overhead when no tool is attached shifting the cost to execution with
tool attached.
This patch does not implement OMPT for libomptarget.
Patch by Simon Convent and Joachim Protze
Differential Revision: https://reviews.llvm.org/D38185
llvm-svn: 317085
Previous differencials D23305-D23310 changed task frame information management only for the kmp interface, but not for the whole gomp interface. This broke some testcases when building with gcc.
This patch fixes the broken task frame information for the gomp interface.
Patch by Joachim Protze!
Differential Revision: https://reviews.llvm.org/D24502
llvm-svn: 281468
In case, the current team is a serialized team (lwt), the frame information should be written to this data structure.
Before, nested serialized teams would overwrite the same task information.
Patch by Joachim Protze!
Differential Revision: https://reviews.llvm.org/D23310
llvm-svn: 281467
The comment already states, that this function should work similarly as __ompt_get_taskinfo.
The function only looked for lwt entries of the current team, but not when unrolling the parents. This fix aligns the implementation to __ompt_get_taskinfo.
The new test case creates a single theaded team (->lwt) and then a nested active team.
Before the innermost print_id(1) would deliver a different team then the outer print_id(0).
Patch by Joachim Protze!
Differential Revision: https://reviews.llvm.org/D23309
llvm-svn: 281466
The exit address is set when execution of a task is started and should be reset as soon as the execution is finished.
Especially for the asm implementation of __kmp_invoke_microtask, resetting in this call would be painfull, so reset just after the invokation.
The testcase shows the effect of this patch:
Before, the implicit barriers at the end of an implicit task would see an exit address for the implicit task.
This barrier is a task scheduling point. Thus, any explicit task scheduled there would see an exit, but no reenter address for the implicit task.
Patch by Joachim Protze!
Differential Revision: https://reviews.llvm.org/D23307
llvm-svn: 281465
The latest OMPT spec changed the semantic of a tasks reenter frame to be the application frame, that will be entered, when the runtime frame drops.
Before it was the last frame in the runtime. This doesn't work for some gcc execution pathes or even clang generated code for :
Since there is no runtime frame between the executed task and the encountering task.
The test case compares exit and reenter addresses against addresses captured in application code
Patch by Joachim Protze!
Differential Revision: https://reviews.llvm.org/D23305
llvm-svn: 281464
OMPT tests can check for right frame information of tasks:
* parent_task_frame was directly printed as a pointer, but actually points to a struct ompt_frame {void*, void*}
* NULL is printed in the beginning of execution and loaded to FileChecker variable [[NULL]]
* implicit tasks now also print their frame information
* macro to print frame address from application
* print task info for barrier begin
Patch by Joachim Protze!
Differential Revision: https://reviews.llvm.org/D23304
llvm-svn: 281463
For serialized parallel regions, wrong ids were reported. Now the same code is
used as in kmp_dispatch.cpp which emits the correct ids.
Differential Revision: http://reviews.llvm.org/D18348
llvm-svn: 264266
For non-serialized parallel regions the master thread issued two callbacks:
The first one in kmp_gsupport.c and the second in __kmp_join_call. Therefore
only trigger the callback in kmp_gsupport.c for serialized parallel regions.
Differential Revision: http://reviews.llvm.org/D16716
llvm-svn: 264264
Some basic checks next to the implementation should futher lower the
possibility to introduce regressions. (Note that this would have catched
the ordering issue fixed in rL258866 and pointed to rL263940.)
The tests are implementation dependent in one point because they assume that
thread ids are assigned in ascending order. This is not defined by the standard
but currently ensured in libomp. We have to think about another way of ordering
the threads should this ever be subject to change...
Note that this isn't aiming at replacing the implementation independent
test-suite at https://github.com/OpenMPToolsInterface/ompt-test-suite!
Differential Revision: http://reviews.llvm.org/D16715
llvm-svn: 264027
Joachim Protze