Function::copyAttributesFrom will copy the personality function, prefix
data and prolog data from the source function to the new function, and
is invoked when the IRMover copies the function prototype. This puts a
reference to a constant in the source module on a function in the dest
module, which causes an error when deleting the source module after
importing, since the personality function in the source module still has
uses (this would presumably also be an issue for the prologue and prefix
data). Remove the copies added to the dest copy when creating the new
prototype, as they are mapped properly when/if we link the function body.
llvm-svn: 257420
Currently WebAssembly has two kinds of relocations; data addresses and
function addresses. This adds ELF relocations for them, as well as an
MC symbol kind to indicate which type of relocation is needed.
llvm-svn: 257416
Apparently the preferred version is the incredibly complicated
VerifyVersionInfoW function.
Rename the function to avoid potential future name clashes.
llvm-svn: 257415
Currently we're unrolling loops more in minsize than in optsize, which
means -Oz will have a larger code size than -Os. That doesn't make any
sense.
This resolves the FIXME about this in LoopUnrollPass and extends the
optsize test to make sure we use the smaller threshold for minsize as
well.
llvm-svn: 257402
This is a continuation of adding FMF to call instructions:
http://reviews.llvm.org/rL255555
The intent of the patch is to preserve the current behavior of the transform except
that we use the sqrt instruction's 'fast' attribute as a trigger rather than the
function-level attribute.
But this raises a bug noted by the new FIXME comment.
In order to do this transform:
sqrt((x * x) * y) ---> fabs(x) * sqrt(y)
...we need all of the sqrt, the first fmul, and the second fmul to be 'fast'.
If any of those ops is strict, we should bail out.
Differential Revision: http://reviews.llvm.org/D15937
llvm-svn: 257400
Always expect tglobaladdr and texternalsym to be wrapped in
WebAssemblywrapper nodes. Also, split out a regPlusGA from regPlusImm so
that it can special-case global addresses, as they can be folded in more
cases.
Unfortunately this doesn't enable any new optimizations yet due to
SelectionDAG limitations. I'll be submitting changes to the SelectionDAG
infrastructure, along with tests, in a separate patch.
llvm-svn: 257394
Address review feedback from r255909.
Move body of resolveCycles(bool AllowTemps) to
resolveRecursivelyImpl(bool AllowTemps). Revert resolveCycles back
to asserting on temps, and add new resolveNonTemporaries interface
to invoke the new implementation with AllowTemps=true. Document
the differences between these interfaces, specifically the effect
on RAUW support and uniquing. Call appropriate interface from
ValueMapper.
llvm-svn: 257389
This reverts commit r254363.
load64BitDebugHelp() has the side effect of loading dbghelp and setting
globals. It should be called in no-asserts builds as well as debug
builds.
llvm_unreachable is also not appropriate here, since we actually want to
return if dbghelp couldn't be loaded in a non-asserts build.
llvm-svn: 257384
This removes ifdefs and fixes the build for users of the Win8.0 SDK,
which I happen to be. Upgrading is not hard, but executing the same code
everywhere seems better.
llvm-svn: 257379
This patch fixes the memory sanitizer origin store instrumentation for
array types. This can be triggered by cases where frontend lowers
function return to array type instead of aggregation.
For instance, the C code:
--
struct mypair {
int64_t x;
int y;
};
mypair my_make_pair(int64_t x, int y) {
mypair p;
p.x = x;
p.y = y;
return p;
}
int foo (int p)
{
mypair z = my_make_pair(p, 0);
return z.y + z.x;
}
--
It will be lowered with target set to aarch64-linux and -O0 to:
--
[...]
define i32 @_Z3fooi(i32 %p) #0 {
[...]
%call = call [2 x i64] @_Z12my_make_pairxi(i64 %conv, i32 0)
%1 = bitcast %struct.mypair* %z to [2 x i64]*
store [2 x i64] %call, [2 x i64]* %1, align 8
[...]
--
The origin store will emit a 'icmp' to test each store value again the
TLS origin array. However since 'icmp' does not support ArrayType the
memory instrumentation phase will bail out with an error.
This patch change it by using the same strategy used for struct type on
array.
It fixes the 'test/msan/insertvalue_origin.cc' for aarch64 (the -O0 case).
llvm-svn: 257375
The hardware instruction's output on 0 is -1 rather than 32.
Eliminate a test and select to -1. This removes an extra instruction
from the compatability function with HSAIL's firstbit instruction.
llvm-svn: 257352
The new ORC remote-JITing support provides a superset of the old code's
functionality, so we can replace the old stuff. As a bonus, a couple of
previously XFAILed tests have started passing.
llvm-svn: 257343
Summary:
It actually takes an offset into the current PC-region.
This fixes the 'expr' command in lldb.
Reviewers: vkalintiris, jaydeep, bhushan
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16054
llvm-svn: 257339
In the OptimizeLEA pass keep instructions' positions in the basic block saved and use them for calculation of the distance between two instructions instead of std::distance. This reduces complexity of the pass from O(n^3) to O(n^2) and thus the compile time.
Differential Revision: http://reviews.llvm.org/D15692
llvm-svn: 257328
This is a recommit of r257253 which was reverted in r257270.
Previous testcase can make failure on some targets due to using opt with O3 option.
Original Summary:
Merge MBBICommon and MBBI's MMOs.
Differential Revision: http://reviews.llvm.org/D15990
llvm-svn: 257317
This patch adds utilities to ORC for managing a remote JIT target. It consists
of:
1. A very primitive RPC system for making calls over a byte-stream. See
RPCChannel.h, RPCUtils.h.
2. An RPC API defined in the above system for managing memory, looking up
symbols, creating stubs, etc. on a remote target. See OrcRemoteTargetRPCAPI.h.
3. An interface for creating high-level JIT components (memory managers,
callback managers, stub managers, etc.) that operate over the RPC API. See
OrcRemoteTargetClient.h.
4. A helper class for building servers that can handle the RPC calls. See
OrcRemoteTargetServer.h.
The system is designed to work neatly with the existing ORC components and
functionality. In particular, the ORC callback API (and consequently the
CompileOnDemandLayer) is supported, enabling lazy compilation of remote code.
Assuming this doesn't trigger any builder failures, a follow-up patch will be
committed which tests these utilities by using them to replace LLI's existing
remote-JITing demo code.
llvm-svn: 257305
This is a more generic version of the MCJITMemoryManager::notifyObjectLoaded
method: It provides only a RuntimeDyld reference (rather than an
ExecutionEngine), and so can be used with ORC JIT stacks.
llvm-svn: 257296
RuntimeDyld::MemoryManager.
The RuntimeDyld::MemoryManager::reserveAllocationSpace method is called when
object files are loaded, and gives clients a chance to pre-allocate memory for
all segments. Previously only the size of each segment (code, ro-data, rw-data)
was supplied but not the alignment. This hasn't caused any problems so far, as
most clients allocate via the MemoryBlock interface which returns page-aligned
blocks. Adding alignment arguments enables finer grained allocation while still
satisfying alignment restrictions.
llvm-svn: 257294
In r255760, I optimized the SectionMemoryManager to make better use
of virtual memory on platforms where the allocation granularity was
bigger than the protection granularity. As part of this, fixing up
the free list became more complicated and was moved into
`applyMemoryGroupPermissions`. Unfortunately, I forgot to actually
remove the call that drops the free list for RO memory (I did
remove the corresponding one for RX memory), defeating the whole
optimization.
llvm-svn: 257293
Summary:
Use proper dataflow ordering to speed convergence.
This will converge the testcase on bug 26055 in 2 iterations.
(data structures speedups to come to make even that faster)
Reviewers: kcc, samsonov, echristo, dblaikie, tvvikram
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16039
llvm-svn: 257292
Teresa Johnson