Summary:
llvm::APSInt(0) asserts because it creates an int with bit-width 0 and
not (as I thought) a value 0.
Theoretically it should be sufficient to change this to APSInt(1), as
the intention there was that the value of the first argument should be
ignored if the type is invalid, but that would look dodgy.
Instead, I use llvm::Optional to denote an invalid value and use a
special struct instead of a std::pair, to reduce typing and increase
clarity.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40615
llvm-svn: 319414
It has no functionality effect.
I was concerned about the worse performance of DWARFDebugInfo::Parse this way
of allocating+destroying a CU for each iteration but I see it is now used only
by DWARFDebugInfo::Dump so that is no longer a problem.
Differential revision: https://reviews.llvm.org/D40212
llvm-svn: 319359
Summary: This remove a small amount of duplicated code.
Reviewers: clayborg, zturner, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40536
llvm-svn: 319191
In https://reviews.llvm.org/D39681, we started using a map instead
passing a long list of register sets to the ppc64le register context.
However, existing register contexts were still using the old method.
This converts the remaining register contexts to use this approach.
While doing that, I've had to modify the approach a bit:
- the general purpose register set is still kept as a separate field,
because this one is always present, and it's parsing is somewhat
different than that of other register sets.
- since the same register sets have different IDs on different operating
systems, but we use the same register context class to represent
different register sets, I've needed to add a layer of indirection to
translate os-specific constants (e.g. NETBSD::NT_AMD64_FPREGS) into more
generic terms (e.g. floating point register set).
While slightly more complicated, this setup allows for better separation
of concerns. The parsing code in ProcessElfCore can focus on parsing
OS-specific core file notes, and can completely ignore
architecture-specific register sets (by just storing any unrecognised
notes in a map). These notes will then be passed on to the
architecture-specific register context, which can just deal with
architecture specifics, because the OS-specific note types are hidden in
a register set description map.
This way, adding an register set, which is already supported on other
OSes, to a new OS, should in most cases be as simple as adding a new
entry into the register set description map.
Differential Revision: https://reviews.llvm.org/D40133
llvm-svn: 319162
Summary:
New linux kernels (on systems that support the XSAVES instruction) will
not update the inferior registers unless the corresponding flag in the
XSAVE header is set. Normally this flag will be set in our image of the
XSAVE area (since we obtained it from the kernel), but if the inferior
has never used the corresponding register set, the respective flag can
be clear.
This fixes the issue by making sure we explicitly set the flags
corresponding to the registers we modify. I don't try to precisely match
the flags to set on each write, as the rules could get quite complicated
-- I use a simpler over-approximation instead.
This was already caught by test_fp_register_write, but that was only
because the code that ran before main() did not use some of the register
sets. Since nothing in this test relies on being stopped in main(), I
modify the test to stop at the entry point instead, so we can be sure
the inferior did not have a chance to access these registers.
Reviewers: clayborg, valentinagiusti
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40434
llvm-svn: 319161
Summary:
This method doesn't modify anything in the object it's called on so we
can mark it const to make it usable in a const context.
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40517
llvm-svn: 319095
This was a temporary thing, until llvm has proper support for formatting
time. That time has come, so we can remove the relevant code. There
should be no change in the format of the time.
llvm-svn: 319048
Summary:
We've had a single function responsible for splitting a core segment
into notes, and parsing the notes themselves, bearing in mind variations
between 4 supported OS types. This commit splits that code into 5
pieces:
- (os-independent) code for splitting a segment into individual notes
- per-os function for parsing the notes into thread information
Reviewers: clayborg, krytarowski, emaste, alexandreyy, kettenis
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40311
llvm-svn: 318903
DWO/DWP should not be indexed directly.
Instead, the corresponding base file should be used.
This diff adds an assert to DWARFCompileUnit::Index
and adjusts the methods
SymbolFileDWARF::FindCompleteObjCDefinitionTypeForDIE,
SymbolFileDWARF::GetObjCMethodDIEOffsets accordingly.
Differential revision: https://reviews.llvm.org/D39825
llvm-svn: 318554
so it has the same padding as the kernel's definition
which is written in terms of uint128_t. Original patch
by Ryan Mansfield.
<rdar://problem/35468499>
llvm-svn: 318357
break. The alignas(__uint128_t) is not recognized with MSVC
it looks like. Zachary, is there a similar type on windows?
I suppose I can go with alignas(16) here but I'd prefer to
specify the type alignment that I want & let the ABI dictate
how much padding is required.
llvm-svn: 318262
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Summary:
In D39387, I was quick to jump to conclusion that ArchSpec has no
external dependencies. It turns there still was one call to
HostInfo::GetArchitecture left -- for implementing the "systemArch32"
architecture and friends.
Since GetAugmentedArchSpec is the place we handle these "incomplete"
triples that don't specify os or vendor and "systemArch" looks very much
like an incomplete triple, I move its handling there.
After this ArchSpec *really* does not have external dependencies, and
I'll move it to the Utility module as a follow-up.
Reviewers: zturner, clayborg, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39896
llvm-svn: 318046
Summary:
Despite it's name, GetTemplateArgument was only really working for Type
template arguments. This adds the ability to retrieve integral arguments
as well (which I've needed for the std::bitset data formatter).
I've done this by splitting the function into three pieces. The idea is
that one first calls GetTemplateArgumentKind (first function) to
determine the what kind of a parameter this is. Based on that, one can
then use specialized functions to retrieve the correct value. Currently,
I only implement two of these: GetTypeTemplateArgument and
GetIntegralTemplateArgument.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39844
llvm-svn: 318040
This commit really did not introduce any functional changes (for most
people) but it turns out it's not for the reason we thought it was.
The reason wasn't that Orc is a perfect drop-in replacement for MCJIT,
but it was because we were never using Orc in the first place, as it was
not initialized.
Orc's initialization relies on a global constructor in the LLVMOrcJIT.a.
Since this archive does not expose any symbols referenced from other
object files, it does not get linked into liblldb when linking against
llvm components statically. However, in an LLVM_LINK_LLVM_DYLIB=On
build, LLVMOrcJit.a is linked into libLLVM.so using --whole-archive, so
the global constructor does end up firing.
The result of using Orc jit is pr34194, where lldb fails to evaluate
even very simple expressions. This bug can be reproduced in
non-LLVM_LINK_LLVM_DYLIB builds by making sure Orc jit is linked into
liblldb, for example by #including
llvm/ExecutionEngine/OrcMCJITReplacement.h in IRExecutionUnit.cpp (and
adding OrcJIT as a dependency to the relevant CMakeLists.txt file). The
bug reproduces (at least) on linux and osx.
The root cause of the bug seems to be related to relocation processing.
It seems Orc processes relocations earlier than the system it is
replacing. This means the relocation processing happens before we have
had a chance to remap section load addresses to reflect their address in
the target process memory, so they end up pointing to locations in the
lldb's address space instead.
I am not sure whether this is a bug in Orc jit, or in how we are using
it from lldb, but in any case it is preventing us from using Orc right
now. Reverting this fixes LLVM_LINK_LLVM_DYLIB build, and makes it clear
that we are in fact *not* using Orc, and we never really were.
This reverts commit r279327.
llvm-svn: 318039
FindCompleteObjCDefinitionType is not used anywhere and there is no implementation of it, only a declaration.
Test plan: make check-lldb
Differential revision: https://reviews.llvm.org/D39884
llvm-svn: 317919
Summary:
This commit removes the concrete_frame_idx member from
NativeRegisterContext and related functions, which was always set to
zero and never used.
I also change the native thread class to store a NativeRegisterContext
as a unique_ptr (documenting the ownership) and make sure it is always
initialized (most of the code was already blindly dereferencing the
register context pointer, assuming it would always be present -- this
makes its treatment consistent).
Reviewers: eugene, clayborg, krytarowski
Subscribers: aemerson, sdardis, nemanjai, javed.absar, arichardson, kristof.beyls, kbarton, uweigand, alexandreyy, lldb-commits
Differential Revision: https://reviews.llvm.org/D39837
llvm-svn: 317881
Summary:
These tests used to log the error message and return plain bool mainly
because at the time they we written, we did not have a nice way to
assert on llvm::Error values. That is no longer true, so replace this
pattern with a more idiomatic approach.
As a part of this patch, I also move the formatting of
GDBRemoteCommunication::PacketResult values out of the test code, as
that can be useful elsewhere.
Reviewers: zturner, eugene
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D39790
llvm-svn: 317795
Summary:
These functions used to return bool to signify whether they were able to
retrieve the data. This is redundant because the ArchSpec and ByteOrder
already have their own "invalid" states, *and* because both of the
current implementations (linux, netbsd) can always provide a valid
result.
This allows us to simplify bits of the code handling these values.
Reviewers: eugene, krytarowski
Subscribers: javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39733
llvm-svn: 317779
The thread name was not followed by a space, which meant it was glued to
the log message. I also align the name as we do that with other log
fields. I align it to 16 chars instead of llvm::max_thread_name(), as
that can be 64 on darwin, which is rather long. If anybody feels
differently about that, we can change it.
llvm-svn: 317679
Summary:
A couple of members of these data structures have been renamed in recent
months. This makes sure they still work with the latest libc++ version.
Reviewers: jingham, EricWF
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39602
llvm-svn: 317624
Summary:
Posix core files sometime don't contain enough information to correctly
detect the OS. If that is the case we should use the OS from the target
instead as it will contain usable information in more cases and if the
target and the core contain different OS-es then we are already in a
pretty bad state so moving from an unknown OS to a known (but possibly
incorrect) OS will do no harm.
We already had similar code in place for MIPS. This change tries to make
it more generic by using ArchSpec::MergeFrom and extends it to all
architectures but some MIPS specific issue prevent us from getting rid
of special casing MIPS.
Reviewers: clayborg, nitesh.jain
Subscribers: aemerson, sdardis, arichardson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D36046
llvm-svn: 317411
Summary:
macOS builds of LLDB use the bundle version from
`tools/driver/lldb-Info.plist`. That file hasn't been updated since the 4.0
release so the version we print provides no value. I also think that even if it
were up to date, that number has no meaning and displaying the version from the
LLVM tree is more valuable.
I know that Apple folks have some form of override for the clang version to
match the Xcode version, so it'd make sense for them to do the same for LLDB.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39429
llvm-svn: 317218
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D39128
<rdar://problem/34870417>
llvm-svn: 317182
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D38829
llvm-svn: 317180
Summary:
std::queue is just a fancy wrapper around another container, so all we
need to do is to delegate to the it.
Reviewers: jingham, EricWF
Subscribers: srhines, mgorny, lldb-commits, eugene
Differential Revision: https://reviews.llvm.org/D35666
llvm-svn: 317099
Summary:
It is not presently used, and it's quite dangerous to use -- it assumes the
integer is an osx kern_return_t, but very few of the integers we have lying
around are mach kernel error codes. The error can still be used to a
mach error using a slightly longer (but more explicit) syntax.
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35305
llvm-svn: 317093
Summary:
r316368 broke this build when it introduced a reference to a pthread
function to the Utility module. This caused cmake to generate an
incorrect link line (wrong order of libs) because it did not see the
dependency from Utility to the system libraries. Instead these libraries
were being manually added to each final target.
This changes moves the dependency management from the individual targets
to the lldbUtility module, which is consistent with how llvm does it.
The final targets will pick up these libraries as they will be a part of
the link interface of the module.
Technically, some of these dependencies could go into the host module,
as that's where most of the os-specific code is, but I did not try to
investigate which ones.
Reviewers: zturner, sylvestre.ledru
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D39246
llvm-svn: 316997
The previous value was not sufficient for Pixel 2 phones. One would have
hoped that the newer phones are faster, but that does not seem to be the
case here.
llvm-svn: 316993
Summary:
This adds a data formatter for the implementation of forward_list in
libc++. I've refactored the existing std::list data formatter a bit to
enable more sharing of code (mainly the loop detection stuff).
Reviewers: jingham, EricWF
Subscribers: srhines, eugene, lldb-commits
Differential Revision: https://reviews.llvm.org/D35556
llvm-svn: 316992
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
Versions of android before kitkat implemented pselect non-atomically,
which caused flakyness, as we were relying on it atomically setting the
signal mask to implement waiting for signals.
This patch implements a direct call to the the pselect kernel syscall,
which does not suffer from this problem. The code itself is not very
pretty, but fortunately the uglyness is contained in the
android version of the MainLoop::RunImpl::Poll function.
llvm-svn: 316915
UriParser::Parse is returning a StringRef pointing the the parsed
string, but we were calling it with a temporary string. Change this to a
local variable to make sure the string persists as long as we need it.
llvm-svn: 316740
Summary:
This matches other SysV ABIs that are different on Apple and non-Apple targets,
like `ABISysV_arm.cpp` for instance.
Reviewers: clayborg, emaste
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39335
llvm-svn: 316673
This creates a new Architecture plugin and moves the stop info override
callback to this place. The motivation for this is to remove complex
dependencies from the ArchSpec class because it is used in a lot of
places that (should) know nothing about Process instances and StopInfo
objects.
I also add a test for the functionality covered by the override
callback.
Differential Revision: https://reviews.llvm.org/D31172
llvm-svn: 316609
Summary:
We had a bug where if we had forked (in the ProcessLauncherPosixFork)
while another thread was writing a log message, we would deadlock. This
happened because the fork child inherited the locked log rwmutex, which
would never get unlocked. This meant the child got stuck trying to
disable all log channels.
The bug existed for a while but only started being apparent after
D37930, which started using ThreadLauncher (which uses logging) instead
of std::thread (which does not) for launching TaskPool threads.
The fix is to use pthread_atfork to disable logging in the forked child.
Reviewers: zturner, eugene, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D38938
llvm-svn: 316368
The pthread_atfork trick breaks on android, because
pthread_rwlock_unlock detects that it is not the same thread which
locked the lock. This means that the subsequent lock attempt will still
deadlock (only this time it happens deterministically instead of at
random). Reverting to find a better solution.
This reverts commit r316173.
llvm-svn: 316231
Summary:
We had a bug where if we had forked (in the ProcessLauncherPosixFork)
while another thread was writing a log message, we would deadlock. This
happened because the fork child inherited the locked log rwmutex, which
would never get unlocked. This meant the child got stuck trying to
disable all log channels.
The bug existed for a while but only started being apparent after
D37930, which started using ThreadLauncher (which uses logging) instead
of std::thread (which does not) for launching TaskPool threads.
The fix is to use pthread_atfork to make sure noone is writing a log
message while we are forking.
Reviewers: zturner, eugene, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D38938
llvm-svn: 316173
Summary:
The NativeThread class is useless without the containing process (and in
some places it is already assuming the process is always around). This
makes it clear that the NativeProcessProtocol is the object owning the
threads, and makes the destruction order deterministic (first threads,
then process). The NativeProcess is the only thing holding a thread
unique_ptr, and methods that used to hand out thread shared pointers now
return raw pointers or references.
Reviewers: krytarowski, eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35618
llvm-svn: 316007
This patch adds support for passing an arbitrary python stream
(anything inheriting from IOBase) to SetOutputFileHandle or
SetErrorFileHandle.
Differential revision: https://reviews.llvm.org/D38829
<rdar://problem/34870417>
llvm-svn: 315966
* Prevent dumping of characters in DumpDataExtractor() with
item_byte_size bigger than 8 bytes. This case is not supported by the
code and results in a crash because the code calls
DataExtractor::GetMaxU64Bitfield() -> GetMaxU64() that asserts for
byte size > 8 bytes.
* Teach DataExtractor::GetMaxU64(), GetMaxU32(), GetMaxS64() and
GetMaxU64_unchecked() how to handle byte sizes that are not a multiple
of 2. This allows DumpDataExtractor() to dump characters and booleans
with item_byte_size in the interval of [1, 8] bytes. Values that are
not a multiple of 2 would previously result in a crash because they
were not handled by GetMaxU64().
llvm-svn: 315444
Previously LLDB required the DWP file
to be located next to the executable file.
This diff uses the helper function
Symbols::LocateExecutableSymbolFile to search for
DWP files in the standard locations for debug symbols.
Test plan:
Build a toy test example:
main.cpp
clang -gsplit-dwarf -g -O0 main.cpp -o main.exe
llvm-dwp -e main.exe -o main.exe.dwp
mkdir -p debug_symbols
mv main.exe.dwp debug_symbols/main.exe.dwp
Run lldb:
lldb
settings set target.debug-file-search-paths ./debug_symbols
file ./main.exe
br set --name f
run
Check that debugging works:
setting breakpoints, printing local variables.
Differential revision: https://reviews.llvm.org/D38568
llvm-svn: 315387
This allows clients to avoid an unnecessary fs::status() call on each
directory entry. Because the information returned by FindFirstFileEx
is a subset of the information returned by a regular status() call,
I needed to extract a base class from file_status that contains only
that information.
On my machine, this reduces the time required to enumerate a ThinLTO
cache directory containing 520k files from almost 4 minutes to less
than 2 seconds.
Differential Revision: https://reviews.llvm.org/D38716
llvm-svn: 315378
Summary:
While the specification says that the 64bit registers are prefixed with
`x`, it seems that many people still use `r`. Until recently, we had been using
the `r` prefix instead of the `x` prefix in ds2. This caused lldb to fail during
unwinding. I think it's reasonable to check for a register prefixed with `r`,
since some people still choose to use `r`.
Reviewers: sas, fjricci, clayborg
Reviewed By: sas, clayborg
Subscribers: aemerson, javed.absar, kristof.beyls
Differential Revision: https://reviews.llvm.org/D38376
Change by Alex Langford <apl@fb.com>
llvm-svn: 315221
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
Add support for ppc64le to create breakpoints and read/write
general purpose registers.
Other features for ppc64le and functions to read/write
other registers are being implemented.
Patch by Alexandre Yukio Yamashita (alexandreyy)
Differential Revision: https://reviews.llvm.org/D38323
llvm-svn: 315008
SymbolFileDWARFDwp contains m_debug_cu_index_map which was previously
initialized incorrectly: before m_debug_cu_index.parse
is called m_debug_cu_index is empty, thus
the map was not actually getting populated properly.
This diff moves this step into a private helper method
and calls it after m_debug_cu_index.parse inside SymbolFileDWARFDwp::Create.
Test plan:
Build a toy test example
main.cpp
clang -gsplit-dwarf -g -O0 main.cpp -o main.exe
llvm-dwp -e main.exe -o main.exe.dwp
Build LLDB with ENABLE_DEBUG_PRINTF set.
Run: lldb -- ./main.exe
Check that the indexes are now correct
(before this change they were empty)
Check that debugging works
(setting breakpoints, printing local variables (this was not working before))
Differential revision: http://reviews.llvm.org/D38492
llvm-svn: 314832
FreeBSD kernel modules are actually relocatable (.o) ELF files and this
previously caused some issues for LLDB. This change addresses these when
using lldb to symbolicate FreeBSD kernel backtraces.
The major problems:
- Relocations were not being applied to the DWARF debug info despite
there being code to do this. Several issues prevented it from working:
- Relocations are computed at the same time as the symbol table, but
in the case of split debug files, symbol table parsing always
redirects to the primary object file, meaning that relocations would
never be applied in the debug file.
- There's actually no guarantee that the symbol table has been parsed
yet when trying to parse debug information.
- When actually applying relocations, it will segfault because the
object files are not mapped with MAP_PRIVATE and PROT_WRITE.
- LLDB returned invalid results when performing ordinary address-to-
symbol resolution. It turned out that the addresses specified in the
section headers were all 0, so LLDB believed all the sections had
overlapping "file addresses" and would sometimes return a symbol from
the wrong section.
Patch by Brian Koropoff
Differential Revision: https://reviews.llvm.org/D38142
llvm-svn: 314672
Jim Ingham