We unconditionally compared the DW_AT_ranges offset to the length of the
.debug_ranges section. For DWARF5 we should look at the debug_rnglists
section instead.
Differential revision: https://reviews.llvm.org/D78971
the tests pass on Linux.
Summary:
This change implements readFromExe, and calculating VA and RVA, which
are some of the functionalities that will be used for native PDB reading
for llvm symbolizer.
bug: https://bugs.llvm.org/show_bug.cgi?id=41795
Summary:
This change implements readFromExe, and calculating VA and RVA, which
are some of the functionalities that will be used for native PDB reading
for llvm symbolizer.
bug: https://bugs.llvm.org/show_bug.cgi?id=41795
Reviewers: hans, amccarth, rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78128
Summary:
Without this we could silently accept an invalid prologue because the
default DataExtractor behavior is to return an empty string when
reaching the end of file. And empty string is also used to terminate
these lists.
This makes the parsing code slightly more complicated, but this
complexity will go away once the parser starts working with truncating
data extractors. The reason I am doing it this way is because without
this, the truncation would regress the quality of error messages (right
now, we produce bad error messages only near EOF, but truncation would
make everything behave as if it was near EOF).
Reviewers: dblaikie, probinson, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77555
Summary:
This constructor allows us to create a new DWARFDataExtractor which will
only present a subrange of an entire debug section. Since debug sections
typically consist of multiple contributions, it is expected that one
will create a new data extractor for each contribution in order to
avoid unexpectedly running off into the next one.
This is very useful for unifying the flows for detecting parse errors.
Without it, the code needs to consider two very different scenarios:
1. If there is another contribution after the current one, the
DataExtractor functions will just start reading from there. This is
detectable by comparing the current offset against the known
end-of-contribution offset.
2. If this is the last contribution, the data extractor will just start
returning zeroes (or other default values). This situation can *not*
be detected by checking the parsing offset, as this will not be
advanced in case of errors.
Using a truncated data extractor simplifies the code (and reduces
cognitive load) by making these two cases behave identically -- a
running off the end of a contribution will _always_ produce an EOF error
(if one uses error-aware parsing methods) or return default values.
Reviewers: dblaikie, probinson, jhenderson, ikudrin
Subscribers: aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77556
Summary:
If we have an (invalid) relocation which relocates bytes which partially
lie outside the range of the relocated section, the getRelocatedValue
would return confusing results. It would first read zero (because that's
what the underlying DataExtractor api does for out-of-bounds reads), and
then relocate that zero anyway.
A more appropriate behavior is to return zero straight away. This is
what this patch does.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78113
Summary:
Although the function had a bool return value, it was always returning
true. Presumably this is because the main type of errors one can
encounter here is running off the end of the stream, and until very
recently, the DataExtractor class made it very difficult to detect that.
The situation has changed now, and we can easily detect errors here,
which this patch does.
Reviewers: dblaikie, aprantl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77308
In DWARFv5, type units are stored in .debug_info sections, along with
compilation units, and they are distinguished by the unit_type field
in the header, not by the name of the section. It is impossible to
associate the correct index section of a DWP file with the unit before
the unit's header is read. This patch fixes reading DWARFv5 type units
by parsing the header first and then applying the index entry according
to the actual unit type.
Differential Revision: https://reviews.llvm.org/D77552
Summary:
1. FileLineInfoSpecifier::Default isn't the default for anything.
Rename to RawValue, which accurately reflects its role.
2. Most functions that take a part of a FileLineInfoSpecifier end up
constructing a full one later or plumb two values through. Make them
all just take a complete FileLineInfoSpecifier.
3. Printing basenames only was handled differently from all other
variants, make it parallel to all the other variants.
Reviewers: jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76394
MCTargetOptionsCommandFlags.inc and CommandFlags.inc are headers which contain
cl::opt with static storage.
These headers are meant to be incuded by tools to make it easier to parametrize
codegen/mc.
However, these headers are also included in at least two libraries: lldCommon
and handle-llvm. As a result, when creating DYLIB, clang-cpp holds a reference
to the options, and lldCommon holds another reference. Linking the two in a
single executable, as zig does[0], results in a double registration.
This patch explores an other approach: the .inc files are moved to regular
files, and the registration happens on-demand through static declaration of
options in the constructor of a static object.
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1756977#c5
Differential Revision: https://reviews.llvm.org/D75579
Add a unit test for the compact DWARF expression printer which will be
used by the llvm-objdump --debug-vars option.
Differential revision: https://reviews.llvm.org/D75250
If the minimum_instruction_length of a debug line program is 0, no
address advancing via special opcodes, DW_LNS_const_add_pc, and
DW_LNS_advance_pc can occur, since the minimum_instruction_length is
used in a multiplication. This patch adds a warning reporting when this
issue occurs.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D75189
The line_range value of a debug line program header is used in divisions
related to special opcodes and DW_LNS_const_add_pc opcodes. As such, a
value of 0 cannot be used. This change introduces a new warning, if such
a situation is identified, and does not perform the relevant
calculations.
Reviewed by: probinson, aprantl
Differential Revision: https://reviews.llvm.org/D43470
This patch adds a check which reports an unsupported value of the
maximum_operations_per_instruction field in a debug line table header.
This is reported once per line table, at most, and only if the tablet
would otherwise need to use it (i.e. never for tables with version 3 or
less, or for tables which don't use DW_LNS_const_add_pc or special
opcodes). Unsupported values are currently any apart from 1.
Reviewed by: probinson, MaskRay
Differential Revision: https://reviews.llvm.org/D74819
This fixes printing long values that might reside in CIE and FDE,
including offsets, lengths, and addresses.
Differential Revision: https://reviews.llvm.org/D73887
Summary:
getInitialLength is a *DWARF*DataExtractor method so I had to "upgrade"
some DataExtractors to be able to make use of it.
Reviewers: ikudrin, jhenderson, probinson
Subscribers: aprantl, hiraditya, llvm-commits, dblaikie
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75535
Summary:
In this patch I've done a slightly bigger rewrite to also remove the
hardcoded header lengths.
Reviewers: jhenderson, dblaikie, ikudrin
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75119
Summary: Include the offset at which this happened.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75265
Summary:
Error reporting in DebugInfoDWARF library currently done in three ways :
1. Direct calls to WithColor::error()/WithColor::warning()
2. ErrorPolicy defaultErrorHandler(Error E);
3. void dumpWarning(Error Warning);
additionally, other locations could have more variations:
lld/ELF/SyntheticSection.cpp
if (Error e = cu->tryExtractDIEsIfNeeded(false)) {
error(toString(sec) + ": " + toString(std::move(e)));
DebugInfo/DWARF/DWARFUnit.cpp
if (Error e = tryExtractDIEsIfNeeded(CUDieOnly))
WithColor::error() << toString(std::move(e));
Thus error reporting could look inconsistent. To have a consistent error
messages it is necessary to have a possibility to redefine error
reporting functions. This patch creates two handlers and allows to
redefine them. It also patches all places inside DebugInfoDWARF
to use these handlers.
The intention is always to use following handlers for error reporting
purposes inside DebugInfoDWARF:
DebugInfo/DWARF/DWARFContext.h
std::function<void(Error E)> RecoverableErrorHandler = WithColor::defaultErrorHandler;
std::function<void(Error E)> WarningHandler = WithColor::defaultWarningHandler;
This is last patch from series of patches: D74481, D74635, D75118.
Reviewers: jhenderson, dblaikie, probinson, aprantl, JDevlieghere
Reviewed By: jhenderson
Subscribers: grimar, hiraditya, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D74308
Summary:
Current LLVM code base does not use error handler with ErrorPolicy.
This patch removes ErrorPolicy from DWARFContext.
This patch is extracted from the D74308.
Reviewers: jhenderson, dblaikie, grimar, aprantl, JDevlieghere
Reviewed By: grimar
Subscribers: hiraditya, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D75118
Summary:
This patch introduces a function to house the code needed to do the
DWARF64 detection dance. The function decodes the initial length field
and returns it as a pair containing the actual length, and the DWARF
encoding.
This patch does _not_ attempt to handle the problem of detecting lengths
which extend past the size of the section, or cases when reads of a
single contribution accidentally escape beyond its specified length, but
I think it's useful in its own right.
Reviewers: dblaikie, jhenderson, ikudrin
Subscribers: hiraditya, probinson, aprantl, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74560
Summary:
This should produce slightly better error messages in case of failures.
Only slightly, because this code was pretty careful about that to begin
with -- I've seen code which does much worse.
Reviewers: jhenderson, dblaikie
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74899
Summary:
The Offset provides the offset within the function in a SourceLocation struct. This allows us to show the byte offset within a function. We also track offsets within inline functions as well. Updated the lookup tests to verify the offset for functions and inline functions.
0x1000: main + 32 @ /tmp/main.cpp:45
Reviewers: labath, aadsm, serhiy.redko, jankratochvil, xiaobai, wallace, aprantl, JDevlieghere
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74680
Prior to this patch, if a DW_LNE_set_address opcode was parsed with an
address size (i.e. with a length after the opcode) of anything other 1,
2, 4, or 8, an llvm_unreachable would be hit, as the data extractor does
not support other values. This patch introduces a new error check that
verifies the address size is one of the supported sizes, in common with
other places within the DWARF parsing.
This patch also fixes calculation of a generated line table's size in
unit tests. One of the tests in this patch highlighted a bug introduced
in 1271cde474, when non-byte operands were used as arguments for
extended or standard opcodes.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D73962
Summary:
The DWARF transformer is added as a class so it can be unit tested fully.
The DWARF is converted to GSYM format and handles many special cases for functions:
- omit functions in compile units with 4 byte addresses whose address is UINT32_MAX (dead stripped)
- omit functions in compile units with 8 byte addresses whose address is UINT64_MAX (dead stripped)
- omit any functions whose high PC is <= low PC (dead stripped)
- StringTable builder doesn't copy strings, so we need to make backing copies of strings but only when needed. Many strings come from sections in object files and won't need to have backing copies, but some do.
- When a function doesn't have a mangled name, store the fully qualified name by creating a string by traversing the parent decl context DIEs and then. If we don't do this, we end up having cases where some function might appear in the GSYM as "erase" instead of "std::vector<int>::erase".
- omit any functions whose address isn't in the optional TextRanges member variable of DwarfTransformer. This allows object file to register address ranges that are known valid code ranges and can help omit functions that should have been dead stripped, but just had their low PC values set to zero. In this case we have many functions that all appear at address zero and can omit these functions by making sure they fall into good address ranges on the object file. Many compilers do this when the DWARF has a DW_AT_low_pc with a DW_FORM_addr, and a DW_AT_high_pc with a DW_FORM_data4 as the offset from the low PC. In this case the linker can't write the same address to both the high and low PC since there is only a relocation for the DW_AT_low_pc, so many linkers tend to just zero it out.
Reviewers: aprantl, dblaikie, probinson
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74450
The DWARFv2-4 specification for the line table header states that the
include directories and file name tables both end with a single null
byte. Prior to this change, the parser did not detect if this byte was
missing, because it also stopped reading the tables once it reached the
prologue end, as claimed by the header_length field. This change adds a
check that the terminator has been seen at the end of each table.
Reviewed by: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D74413
Also remove some test duplication and add a test case that shows the
maximum version is rejected (this also shows that the value in the error
message is actually in decimal, and not just missing an 0x prefix).
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D74403
Summary:
Dwarf stores source-file names the three parts:
<compilation_directory><include_directory><filename>
Prior to this change, the code only allowed retrieving either all
three as the absolute path, or just the filename. But many
compile-command lines--especially those in hermetic build systems
don't specify an absolute path, nor just the filename, but rather the
path relative to the compilation directory. This features allows
retrieving them in that style.
Add tests for path printing styles.
Modify createBasicPrologue to handle include directories.
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73383
If a debug line section with version of greater than 5 is encountered,
prior to this change the parser would accept it and treat it as version
5. This might work to some extent, but then it might not at all, as it
really depends on the format of the unspecified future version, which
will be different (otherwise there would be no point in changing the
version number). Any information we could provide has a good chance of
being invalid, so we should just refuse to parse such tables.
Reviewed by: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D74204
Jonas Devlieghere