CMake has a standard way of setting target triple, sysroot and external
toolchain through CMAKE_<LANG>_COMPILER_TARGET, CMAKE_SYSROOT and
CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN. These are turned into
corresponding --target=, --sysroot= and --gcc-toolchain= variables add
included appended to CMAKE_<LANG>_FLAGS.
libunwind, libc++abi, libc++ provides their own mechanism through
<PROJECT>_TARGET_TRIPLE, <PROJECT>_SYSROOT and <PROJECT>_GCC_TOOLCHAIN
variables. These are also passed to lit via lit.site.cfg, and lit config
uses these to set the corresponding compiler flags when building tessts.
This means that there are two different ways of setting target, sysroot
and toolchain, but only one is properly supported in lit. This change
extends CMake build for libunwind, libc++abi and libc++ to also support
the CMake variables in addition to project specific ones in lit.
Differential Revision: https://reviews.llvm.org/D57670
llvm-svn: 353084
LoopVectorize adds llvm.loop.isvectorized, but leaves
llvm.loop.vectorize.enable. Do not consider such a loop for user-forced
vectorization since vectorization already happened -- by prioritizing
llvm.loop.isvectorized except for TM_SuppressedByUser.
Fixes http://llvm.org/PR40546
Differential Revision: https://reviews.llvm.org/D57542
llvm-svn: 353082
This fixes two problems with CSE done in buildConstant. First, this
would hit an assert when used with a vector result type. Solve this by
allowing CSE on the vector elements, but not on the result vector for
now.
Second, this was also performing the CSE based on the input
ConstantInt pointer. The underlying buildConstant could potentially
convert the constant depending on the result type, giving in a
different ConstantInt*. Stop allowing the APInt and ConstantInt forms
from automatically casting to the result type to avoid any similar
problems in the future.
llvm-svn: 353077
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`.)
The list of fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
Reviewers: sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57499
llvm-svn: 353076
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`. But I've seen in multiple CLs in LLVM the modernize style
was recommended and code was fixed based on the style, so I added it as
well.)
The common fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
- Use inline initialization for class member variables
- Use `= default` for empty constructors / destructors
- Use `using` in place of `typedef`
Reviewers: sbc100, tlively, aardappel
Subscribers: dschuff, sunfish, jgravelle-google, yurydelendik, kripken, MatzeB, mgorny, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57500
llvm-svn: 353075
Summary:
Noticed while looking at D56052.
```
// The 'control' of BEXTR has the pattern of:
// [15...8 bit][ 7...0 bit] location
// [ bit count][ shift] name
// I.e. 0b000000011'00000001 means (x >> 0b1) & 0b11
```
I.e. we do not care about any of the bits aside from the low 16 bits.
So there is no point in doing the `slh`,`or` in 64 bits,
let's just do everything in 32 bits, and anyext if needed.
We could do that in 16 even, but we intentionally don't
zext to i16 (longer encoding IIRC),
so i'm guessing the same applies here.
Reviewers: craig.topper, andreadb, RKSimon
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D56715
llvm-svn: 353073
Summary:
While compiling openJDK11 (also other workloads), some make files would pass both CFLAGS and LDFLAGS at link step ; resulting in duplicate options on the command line when one is using LTO and trying to influence the inliner. Most of the internal flags are ZeroOrMore, this diff changes the remaining ones.
Reviewers: david2050, twoh, modocache
Reviewed By: twoh
Subscribers: mehdi_amini, dexonsmith, eraman, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57537
Patch by: Abdoul-Kader Keita
llvm-svn: 353071
These instructions implicitly operate on ST0, but we don't currently add that information to the MachineInstr. We also don't add it the tablegen definitions either.
For the most part this doesn't cause any problems because the stackifying occurs after register allocation. All the instructions are marked as having side effects so the postRA scheduler won't reorder them amongst themselves.
But nothing stops inline assembly using X87 instructions from being reordered around other x87 instructions if that inline assembly wasn't marked volatile.
The two test cases I've identified so far in PR40539 involve loads and stores used to set up the inline assembly or capture the results of the inline assembly ending up in the wrong order.
This patch adds implicit ST0 uses/defs to the load/store instructions to prevent this from happening.
I plan to fix all of the FP instructions, but the binops are bit trickier to get right. So I've chosen fixing the known test cases as a good first step.
I think we also need to update the tablegen descriptions so MS inline assembly infers the right clobbers, but I haven't checked that yet.
Differential Revision: https://reviews.llvm.org/D57644
llvm-svn: 353070
Summary: Use StringSaver/BumpPtrAlloc when parsing lines from --keep-global-symbols files. This allows us to consistently use StringRef for driver options, which avoids copying the full strings for each object copied, as well as simplifies part of D57517.
Reviewers: jhenderson, evgeny777, alexshap
Subscribers: jakehehrlich
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57617
llvm-svn: 353068
Summary:
These were "boilerplate" that repeated information already present
in .functype and end_function, that needed to be repeated to Please
the particular way our object writing works, and missing them would
generate errors.
Instead, we generate the information for these automatically so the
user can concern itself with writing more canonical wasm functions
that always work as expected.
Reviewers: dschuff, sbc100
Subscribers: jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57546
llvm-svn: 353067
This reverts commit b05ecba6d687fcb3078509220c67458bf1d77a2e.
Apparently adding floor breaks AMDGPU somehow, so I have to back this out
while I look into it.
llvm-svn: 353065
This reverts commit 8bbd570fd5205a04d88d2e5513a6e4adbd028039.
Apparently adding ffloor breaks AMDGPU somehow, so I need to back this out
while I look into it.
llvm-svn: 353064
See https://github.com/WebAssembly/tool-conventions/pull/95.
This is less typing and IMHO more readable, and it also fits with
our naming around the binary format which tends to use the short name.
e.g.
include/llvm/BinaryFormat/Wasm.h
tools/llvm-objdump/WasmDump.cpp
etc..
Differential Revision: https://reviews.llvm.org/D57611
llvm-svn: 353062
All of these instructions consume one encoded register and the other register is %st. They either write the result to %st or the encoded register. Previously we printed both arguments when the encoded register was written. And we printed one argument when the result was written to %st. For the stack popping forms the encoded register is always the destination and we didn't print both operands. This was inconsistent with gcc and objdump and just makes the output assembly code harder to read.
This patch changes things to always print both operands making us consistent with gcc and objdump. The parser should still be able to handle the single register forms just as it did before. This also matches the GNU assembler behavior.
llvm-svn: 353061
Add an intrinsic that takes 2 unsigned integers with the scale of them
provided as the third argument and performs fixed point multiplication on
them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D55625
llvm-svn: 353059
This introduces a generic opcode for floating point floor, working towards
selecting @llvm.floor.
Differential Revision: https://reviews.llvm.org/D57484
llvm-svn: 353057
This is no-functional-change-intended although there could
be intermediate variations caused by a difference in the
debug info produced by setting that from the builder's
insertion point.
I'm updating the IR test file associated with this code just
to show that the naming differences from using the builder
are visible.
The motivation for adding a helper function is that we are
likely to extend this code to deal with other overflow ops.
llvm-svn: 353056
Summary:
This is the initial check-in for the Standalone version of Scudo.
The project is initially going to live in scudo/standalone then will
replace scudo. See http://lists.llvm.org/pipermail/llvm-dev/2019-January/129113.html
for details.
This initial CL is meant to lay out the project structure, of both
code & tests, providing a minimal amount of functionalities, namely
various definitions, some atomic helpers and an intrusive list.
(empty.cc is just here to have a compilation unit, but will go away
in the upcoming CLs).
Initial support is restricted to Linux i386 & x86_64 in make files
and will be extended once things land & work.
We will grow organically from here, adding functionalities in limited
amounts.
Reviewers: morehouse, eugenis, vitalybuka, kcc, mcgrathr, flowerhack
Reviewed By: morehouse, vitalybuka
Subscribers: srhines, mgorny, krytarowski, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D57412
llvm-svn: 353055
Summary:
This enables include insertion by adding canonical includes into
preambledata.
Reviewers: ioeric, ilya-biryukov
Subscribers: javed.absar, MaskRay, jkorous, arphaman, cfe-commits
Differential Revision: https://reviews.llvm.org/D57508
llvm-svn: 353054
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r353048 which in turn was a reland of
r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353053
The three switch fallthrough generate a warning with -Wimplicit-fallthrough.
Two are documented as fallthrough, one is not, but I think the intention is to also fallthrough in kmp_tasking.cpp.
Not sure whether kmp.h is the best place to define the macro.
Reviewers: jlpeyton, AndreyChurbanov, Hahnfeld
Reviewed By: jlpeyton
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D56397
llvm-svn: 353052
For PCMPGT(0, X) patterns where we only demand the sign bit (e.g. BLENDV or MOVMSK) then we can use X directly.
Differential Revision: https://reviews.llvm.org/D57667
llvm-svn: 353051
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353048
Summary:
These classes describe the details of the process we are about to
launch, and so they are naturally used by the launching code in the Host
module. Previously they were present in Target because that is the most
important (but by far not the only) user of the launching code.
Since the launching code has other customers, must of which do not care
about Targets, it makes sense to move these classes to the Host layer,
next to the launching code.
This move reduces the number of times that Target is included from host
to 8 (it used to be 14).
Reviewers: zturner, clayborg, jingham, davide, teemperor
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D56602
llvm-svn: 353047
Noticed while investigating PR40483, and fixes the basic test case from the bug - but not a more general case.
We're pretty weak at dealing with ADD/SUB combines compared to the SimplifyAssociativeOrCommutative/SimplifyUsingDistributiveLaws abilities that InstCombine can manage.
llvm-svn: 353044
This patch removes hidden codegen flag -print-schedule effectively reverting the
logic originally committed as r300311
(https://llvm.org/viewvc/llvm-project?view=revision&revision=300311).
Flag -print-schedule was originally introduced by r300311 to address PR32216
(https://bugs.llvm.org/show_bug.cgi?id=32216). That bug was about adding "Better
testing of schedule model instruction latencies/throughputs".
These days, we can use llvm-mca to test scheduling models. So there is no longer
a need for flag -print-schedule in LLVM. The main use case for PR32216 is
now addressed by llvm-mca.
Flag -print-schedule is mainly used for debugging purposes, and it is only
actually used by x86 specific tests. We already have extensive (latency and
throughput) tests under "test/tools/llvm-mca" for X86 processor models. That
means, most (if not all) existing -print-schedule tests for X86 are redundant.
When flag -print-schedule was first added to LLVM, several files had to be
modified; a few APIs gained new arguments (see for example method
MCAsmStreamer::EmitInstruction), and MCSubtargetInfo/TargetSubtargetInfo gained
a couple of getSchedInfoStr() methods.
Method getSchedInfoStr() had to originally work for both MCInst and
MachineInstr. The original implmentation of getSchedInfoStr() introduced a
subtle layering violation (reported as PR37160 and then fixed/worked-around by
r330615).
In retrospect, that new API could have been designed more optimally. We can
always query MCSchedModel to get the latency and throughput. More importantly,
the "sched-info" string should not have been generated by the subtarget.
Note, r317782 fixed an issue where "print-schedule" didn't work very well in the
presence of inline assembly. That commit is also reverted by this change.
Differential Revision: https://reviews.llvm.org/D57244
llvm-svn: 353043
This prevents Constant Hoisting from pulling the constant out of the block,
allowing us to still produce LDRH/UXTH nodes. LDRB/UXTB (255) is already cheap
by the default getIntImmCost, but I've added it for clarity.
Differential Revision: https://reviews.llvm.org/D57671
llvm-svn: 353040
Petr Hosek