This patch addresses a compilation error with clang when
running in Haiku being unable to compile code using
float128 (throws compilation error such as 'float128 is
not supported on this target').
Patch by kallisti5 (Alexander von Gluck IV)
Differential Revision: https://reviews.llvm.org/D54901
llvm-svn: 348368
As of rev. 268898, clang supports __float128 on SystemZ. This seems to
have been in error. GCC has never supported __float128 on SystemZ,
since the "long double" type on the platform is already IEEE-128. (GCC
only supports __float128 on platforms where "long double" is some other
data type.)
For compatibility reasons this patch removes __float128 on SystemZ
again. The test case is updated accordingly.
llvm-svn: 348247
This adds Hurd toolchain support to Clang's driver in addition
to handling translating the triple from Hurd-compatible form to
the actual triple registered in LLVM.
(Phabricator was stripping the empty files from the patch so I
manually created them)
Patch by sthibaul (Samuel Thibault)
Differential Revision: https://reviews.llvm.org/D54379
llvm-svn: 347833
This is skylake-avx512 with the addition of avx512vnni ISA.
Patch by Jianping Chen
Differential Revision: https://reviews.llvm.org/D54792
llvm-svn: 347682
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
This silences a -Wimplicit-fallthrough warning from clang. GCC does not
appear to warn when the case body ends in a switch.
This is a somewhat surprising but intended fallthrough that I pulled out
from my mechanical patch. The code intends to handle 'Yi' and related
constraints as the 'x' constraint.
llvm-svn: 345873
We haven't supported compiling ObjC1 for a long time (and never will again), so
there isn't any reason to keep these separate. This patch replaces
LangOpts::ObjC1 and LangOpts::ObjC2 with LangOpts::ObjC.
Differential revision: https://reviews.llvm.org/D53547
llvm-svn: 345637
Generate the FP16FML intrinsics into arm_neon.h (AArch64 only for now).
Add two new type modifiers to NeonEmitter to handle the new prototypes.
Define __ARM_FEATURE_FP16FML when +fp16fml is enabled and guard the
intrinsics with the macro in arm_neon.h.
Based on a patch by Gao Yiling.
Differential Revision: https://reviews.llvm.org/D53633
llvm-svn: 345344
Similar to how ICC handles CPU-Dispatch on Windows, this patch uses the
resolver function directly to forward the call to the proper function.
This is not nearly as efficient as IFuncs of course, but is still quite
useful for large functions specifically developed for certain
processors.
This is unfortunately still limited to x86, since it depends on
__builtin_cpu_supports and __builtin_cpu_is, which are x86 builtins.
The naming for the resolver/forwarding function for cpu-dispatch was
taken from ICC's implementation, which uses the unmodified name for this
(no mangling additions). This is possible, since cpu-dispatch uses '.A'
for the 'default' version.
In 'target' multiversioning, this function keeps the '.resolver'
extension in order to keep the default function keeping the default
mangling.
Change-Id: I4731555a39be26c7ad59a2d8fda6fa1a50f73284
Differential Revision: https://reviews.llvm.org/D53586
llvm-svn: 345298
I'm unsure if KNL has this feature, but the backend never thought it did, only clang did. The predefined-arch-macros test lost the check for __RTM__ on KNL when it was removed Skylake CPUs in r344117.
I think we want to drop it from KNL for consistency with Skylake anyway regardless of how we got here.
llvm-svn: 344978
The `GNUABIN32` environment in a target triple implies using the N32
ABI. This patch adds support for this environment and switches on N32
ABI if necessary.
Patch by Patch by YunQiang Su.
Differential revision: https://reviews.llvm.org/D51464
llvm-svn: 344570
Summary:
gcc defines macros such as __code_model_small_ based on the user passed command line flag -mcmodel. clang accepts a flag with the same name and similar effects, but does not generate any macro that the user can use. This cl narrows the gap between gcc and clang behaviour.
However, achieving full compatibility with gcc is not trivial: The set of valid values for mcmodel in gcc and clang are not equal. Also, gcc defines different macros for different architectures. In this cl, we only tackle an easy part of the problem and define the macro only for x64 architecture. When the user does not specify a mcmodel, the macro for small code model is produced, as is the case with gcc.
Reviewers: compnerd, MaskRay
Reviewed By: MaskRay
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D52920
llvm-svn: 344000
These intrinsics exist in icc. They can be found on the Intel Intrinsics Guide website.
All the backend support is in place to pattern match a load+bswap or a bswap+store pattern to the MOVBE instructions. So we just need to get the frontend to emit the correct IR. The pointer arguments in icc are declared as void so I had to jump through a packed struct to forcing a specific alignment on the load/store. Same trick we use in the unaligned vector load/store intrinsics
Differential Revision: https://reviews.llvm.org/D52586
llvm-svn: 343343
My previous change (rL340911) set the two features for architectures
>= 6, which wrongly includes v6m. Now set to >= 6 and not Cortex-M.
Differential Revision: https://reviews.llvm.org/D52644
llvm-svn: 343309
This patch allows targetting Armv8.5-A from Clang. Most of the
implementation is in TargetParser, so this is mostly just adding tests.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52491
llvm-svn: 343111
Windows uses `unsigned short` for `wint_t`. Correct the type definition as
vended by the compiler. This type is defined in corecrt.h and is
unconditionally typedef'ed. cl does not have an equivalent to `__WINT_TYPE__`
which is why this was never detected.
llvm-svn: 342557
The instruction set first appeared with Westmere, but not all processors
in that and the next few generations have the instructions. According to
Wikipedia[1], the first generation in which all SKUs have AES
instructions are Skylake and Goldmont. I can't find any Skylake,
Kabylake, Kabylake-R or Cannon Lake currently listed at
https://ark.intel.com that says "Intel® AES New Instructions" "No".
This matches GCC commit
https://gcc.gnu.org/ml/gcc-patches/2018-08/msg01940.html
[1] https://en.wikipedia.org/wiki/AES_instruction_set
Patch By: thiagomacieira
Differential Revision: https://reviews.llvm.org/D51510
llvm-svn: 341862
ARM_FEATURE_DSP is already set for targets with the +dsp feature. In
the backend, this target feature is also used to represent the
availability of the of the instructions that the ACLE guard through
the __ARM_FEATURE_SIMD32 macro. We don't have any cores that
implement one and not the other, so set this macro for cores later
than V6 or for Cortex-M cores that the target parser, or user, reports
that the 'dsp' instructions are supported.
Differential Revision: https://reviews.llvm.org/D51093
llvm-svn: 340911
As reported on http://lists.llvm.org/pipermail/cfe-dev/2018-August/058760.html,
this broke i386-freebsd11 due to its lack of atomic 64 bit primitives.
While that's not really this commit's fault, let's revert back to the old
behaviour until this can be fixed. This means generating cmpxchg8b etc for i386
and i486 which don't technically support those, but that's been the behaviour
for a long time, so a little longer probably doesn't hurt that much.
> Adjust MaxAtomicInlineWidth for i386/i486 targets.
>
> This is to fix the bug reported in https://bugs.llvm.org/show_bug.cgi?id=34347#c6.
> Currently, all MaxAtomicInlineWidth of x86-32 targets are set to 64. However,
> i386 doesn't support any cmpxchg related instructions. i486 only supports cmpxchg.
> So in this patch MaxAtomicInlineWidth is reset as follows:
> For i386, the MaxAtomicInlineWidth should be 0 because no cmpxchg is supported.
> For i486, the MaxAtomicInlineWidth should be 32 because it supports cmpxchg.
> For others 32 bits x86 cpu, the MaxAtomicInlineWidth should be 64 because of cmpxchg8b.
>
> Differential Revision: https://reviews.llvm.org/D42154
llvm-svn: 340666
subtarget features for indirect calls and indirect branches.
This is in preparation for enabling *only* the call retpolines when
using speculative load hardening.
I've continued to use subtarget features for now as they continue to
seem the best fit given the lack of other retpoline like constructs so
far.
The LLVM side is pretty simple. I'd like to eventually get rid of the
old feature, but not sure what backwards compatibility issues that will
cause.
This does remove the "implies" from requesting an external thunk. This
always seemed somewhat questionable and is now clearly not desirable --
you specify a thunk the same way no matter which set of things are
getting retpolines.
I really want to keep this nicely isolated from end users and just an
LLVM implementation detail, so I've moved the `-mretpoline` flag in
Clang to no longer rely on a specific subtarget feature by that name and
instead to be directly handled. In some ways this is simpler, but in
order to preserve existing behavior I've had to add some fallback code
so that users who relied on merely passing -mretpoline-external-thunk
continue to get the same behavior. We should eventually remove this
I suspect (we have never tested that it works!) but I've not done that
in this patch.
Differential Revision: https://reviews.llvm.org/D51150
llvm-svn: 340515
Set __mips_fpr to 0 if o32 ABI is used with either -mfpxx
or none of -mfp32, -mfpxx, -mfp64 being specified.
Introduce additional checks:
-mfpxx is only to be used in conjunction with the o32 ABI.
report an error when incompatible options are provided.
Formerly no errors were raised when combining n32/n64 ABIs
with -mfp32 and -mfpxx.
There are other cases when __mips_fpr should be set to 0
that are not covered, ex. using o32 on a mips64 cpu
which is valid but not supported in the backend as of yet.
Differential Revision: https://reviews.llvm.org/D50557
llvm-svn: 340391
Fast FMAF is not a sufficient condition to enable denormals.
Before VI, enabling denormals caused F32 instructions to
run at F64 speeds.
llvm-svn: 339278
The way address space declarations for builtins currently work
is nearly useless. The code assumes the address spaces used for
builtins is a confusingly named "target address space" from user
code using __attribute__((address_space(N))) that matches
the builtin declaration. There's no way to use this to declare
a builtin that returns a language specific address space.
The terminology used is highly cofusing since it has nothing
to do with the the address space selected by the target to use
for a language address space.
This feature is essentially unused as-is. AMDGPU and NVPTX
are the only in-tree targets attempting to use this. The AMDGPU
builtins certainly do not behave as intended (i.e. all of the
builtins returning pointers can never compile because the numbered
address space never matches the expected named address space).
The NVPTX builtins are missing tests for some, and the others
seem to rely on an implicit addrspacecast.
Change the used address space for builtins based on a target
hook to allow using a language address space for a builtin.
This allows the same builtin declaration to be used for multiple
languages with similarly purposed address spaces (e.g. the same
AMDGPU builtin can be used in OpenCL and CUDA even though the
constant address spaces are arbitarily different).
This breaks the possibility of using arbitrary numbered
address spaces alongside the named address spaces for builtins.
If this is an issue we probably need to introduce another builtin
declaration character to distinguish language address spaces from
so-called "target address spaces".
llvm-svn: 338707
This adds tests for Armv8.4-A, and also some v8.2 and v8.3 tests that were
missing.
Differential Revision: https://reviews.llvm.org/D50068
llvm-svn: 338525
Summary: Microsoft's C++ object model for ARM64 is the same as that for X86_64.
For example, small structs with non-trivial copy constructors or virtual
function tables are passed indirectly. Currently, they are passed in registers
when compiled with clang.
Reviewers: rnk, mstorsjo, TomTan, haripul, javed.absar
Reviewed By: rnk, mstorsjo
Subscribers: kristof.beyls, chrib, llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D49770
llvm-svn: 338076
Changing it to unsigned long (which is 32-bit on wasm32) makes it the same
type as wasm64 (where unsigned long is 64-bit), which would eliminate the most
common cause for mangled names being different between wasm32 and wasm64. For
example, export lists containing symbol names could now often be the same
between wasm32 and wasm64.
Differential Revision: https://reviews.llvm.org/D40526
llvm-svn: 337783
As documented here: https://software.intel.com/en-us/node/682969 and
https://software.intel.com/en-us/node/523346. cpu_dispatch multiversioning
is an ICC feature that provides for function multiversioning.
This feature is implemented with two attributes: First, cpu_specific,
which specifies the individual function versions. Second, cpu_dispatch,
which specifies the location of the resolver function and the list of
resolvable functions.
This is valuable since it provides a mechanism where the resolver's TU
can be specified in one location, and the individual implementions
each in their own translation units.
The goal of this patch is to be source-compatible with ICC, so this
implementation diverges from the ICC implementation in a few ways:
1- Linux x86/64 only: This implementation uses ifuncs in order to
properly dispatch functions. This is is a valuable performance benefit
over the ICC implementation. A future patch will be provided to enable
this feature on Windows, but it will obviously more closely fit ICC's
implementation.
2- CPU Identification functions: ICC uses a set of custom functions to identify
the feature list of the host processor. This patch uses the cpu_supports
functionality in order to better align with 'target' multiversioning.
1- cpu_dispatch function def/decl: ICC's cpu_dispatch requires that the function
marked cpu_dispatch be an empty definition. This patch supports that as well,
however declarations are also permitted, since the linker will solve the
issue of multiple emissions.
Differential Revision: https://reviews.llvm.org/D47474
llvm-svn: 337552
The SPIR target currently allows for half precision floating point types to be
emitted using the LLVM intrinsic functions which convert half types to floats
and doubles. However, this is illegal in SPIR as the only intrinsic allowed by
SPIR is memcpy, as per section 3 of the SPIR specification. Currently this is
leading to an assert being hit in the Clang CodeGen when attempting to emit a
constant or literal _Float16 type in a comparison operation on a SPIR or SPIR64
target. This assert stems from the CodeGen attempting to emit a constant half
value as an integer because the backend has specified that it is using these
half conversion intrinsics (which represents half as i16). This patch prevents
SPIR targets from using these intrinsics by overloading the responsible target
info method, marks SPIR targets as having a legal half type and provides
additional regression testing for the _Float16 type on SPIR targets.
Patch by: Stephen McGroarty
Differential Revision: https://reviews.llvm.org/D48188
llvm-svn: 335111
Diasble the use of the type __float128 for PPC machines older
than Power9.
The use of -mfloat128 for PPC machine older than Power9 will result
in an error.
Differential Revision: https://reviews.llvm.org/D48088
llvm-svn: 334613
Adding __attribute__((aligned(32))) to __m256 breaks the implementation
of _mm256_loadu_ps on Windows. On Windows, alignment attributes have
higher precedence than packing attributes.
We also might want to carefully consider the consequences of changing
our vector typedefs, since many users copy them and invent their own
new, non-Intel specific vector type names.
llvm-svn: 333958
This fixes two major problems:
- We were not capping vector alignment as desired on 32-bit ARM.
- We were using different alignments based on the AVX settings on
Intel, so we did not have a consistent ABI.
This is an ABI break, but we think we can get away with it because
vectors tend to be used mostly in inline code (which is why not having
a consistent ABI has not proven disastrous on Intel).
Intel's AVX types are specified as having 32-byte / 64-byte alignment,
so align them explicitly instead of relying on the base ABI rule.
Note that this sort of attribute is stripped from template arguments
in template substitution, so there's a possibility that code templated
over vectors will produce inadequately-aligned objects. The right
long-term solution for this is for alignment attributes to be
interpreted as true qualifiers and thus preserved in the canonical type.
llvm-svn: 333791
An intrinsic for an old instruction, as described in the Intel SDM.
Reviewers: craig.topper, rnk
Reviewed By: craig.topper, rnk
Differential Revision: https://reviews.llvm.org/D47142
llvm-svn: 333256
in gcc by https://gcc.gnu.org/ml/gcc-cvs/2018-04/msg00534.html.
The -mibt feature flag is being removed, and the -fcf-protection
option now also defines a CET macro and causes errors when used
on non-X86 targets, while X86 targets no longer check for -mibt
and -mshstk to determine if -fcf-protection is supported. -mshstk
is now used only to determine availability of shadow stack intrinsics.
Comes with an LLVM patch (D46882).
Patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D46881
llvm-svn: 332704
When looking at lib/Basic/Targets/OSTargets.h, I noticed that _REENTRANT is defined
unconditionally on Solaris, unlike all other targets and what either Studio cc (only define
it with -mt) or gcc (only define it with -pthread) do.
This patch follows that lead.
Differential Revision: https://reviews.llvm.org/D41241
llvm-svn: 332343
The option enables use of 32-bit pointers for accessing
const/local/shared memory. The feature is disabled by default.
Differential Revision: https://reviews.llvm.org/D46148
llvm-svn: 331938
This is similar to the LLVM change https://reviews.llvm.org/D46290.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46320
llvm-svn: 331834
Summary:
The getConstraintRegister method is used by semantic checking of
inline assembly statements in order to diagnose conflicts between
clobber list and input/output lists. Currently ARM and AArch64 don't
override getConstraintRegister, so conflicts between registers
assigned to variables in asm labels and clobber lists are not
diagnosed. Such conflicts can cause assertion failures in the back end
and even miscompilations.
This patch implements getConstraintRegister for ARM and AArch64
targets. Since these targets don't have single-register constraints,
the implementation is trivial and just returns the register specified
in an asm label (if any).
Reviewers: eli.friedman, javed.absar, thopre
Reviewed By: thopre
Subscribers: rengolin, eraman, rogfer01, myatsina, kristof.beyls, cfe-commits, chrib
Differential Revision: https://reviews.llvm.org/D45965
llvm-svn: 331164
This adds a pre-defined macro to test if the compiler has support for the
v8.2-A dot rpoduct intrinsics in AArch32 mode.
The AAcrh64 equivalent has already been added by rL330229.
The ACLE spec which describes this macro hasn't been published yet, but this is
based on the final internal draft, and GCC has already implemented this.
Differential revision: https://reviews.llvm.org/D46108
llvm-svn: 331038
When rebasing https://reviews.llvm.org/D40898 with GCC 5.4 on Solaris 11.4, I ran
into a few instances of
In file included from /vol/llvm/src/compiler-rt/local/test/asan/TestCases/Posix/asan-symbolize-sanity-test.cc:19:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/string:40:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/bits/char_traits.h:39:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/bits/stl_algobase.h:64:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/bits/stl_pair.h:59:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/bits/move.h:57:
/usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/type_traits:311:39: error: __float128 is not supported on this target
struct __is_floating_point_helper<__float128>
^
during make check-all. The line above is inside
#if !defined(__STRICT_ANSI__) && defined(_GLIBCXX_USE_FLOAT128)
template<>
struct __is_floating_point_helper<__float128>
: public true_type { };
#endif
While the libstdc++ header indicates support for __float128, clang does not, but
should. The following patch implements this and fixed those errors.
Differential Revision: https://reviews.llvm.org/D41240
llvm-svn: 330572
Currently, the interaction between the triple, the CPU, and the
supported features is a mess: the driver edits the triple to indicate
the supported architecture version, and the LLVM backend uses this to
figure out what instructions are legal. This makes it difficult to
understand what's happening, and makes it impossible to LTO together two
modules with different computed architectures.
Instead of relying on triple rewriting to get the correct target
features, we should add the right target features explicitly.
Differential Revision: https://reviews.llvm.org/D45240
llvm-svn: 330169
The WBNOINVD instruction writes back all modified
cache lines in the processor’s internal cache to main memory
but does not invalidate (flush) the internal caches.
Reviewers: craig.topper, zvi, ashlykov
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D43817
llvm-svn: 329848
When NVPTX TARGET_BUILTIN specifies sm_XX or ptxYY as required feature,
consider those features available if we're compiling for GPU >= sm_XX or have
enabled PTX version >= ptxYY.
Differential Revision: https://reviews.llvm.org/D45061
llvm-svn: 329829
Sometimes when people compile bpf programs with
"clang ... -target bpf ...", the kernel header
files may contain host arch inline assembly codes
as in the patch https://patchwork.kernel.org/patch/10119683/
by Arnaldo Carvaldo de Melo.
The current workaround in the above patch
is to guard the inline assembly with "#ifndef __BPF__"
marco. So when __BPF__ is defined, these macros will
have no use.
Such a method is not extensible. As a matter of fact,
most of these inline assembly codes will be thrown away
at the end of clang compilation.
So for bpf target, this patch accepts all asm register
names in clang AST stage. The name will be checked
again during llc code generation if the inline assembly
code is indeed for bpf programs.
With this patch, the above "#ifndef __BPF__" is not needed
any more in https://patchwork.kernel.org/patch/10119683/.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 329823
amdgcn targets only support HIP, which does not define __CUDA_ARCH__.
this is a partial unroll of r329232 / D45277.
Differential Revision: https://reviews.llvm.org/D45387
llvm-svn: 329584
Found via codespell -q 3 -I ../clang-whitelist.txt
Where whitelist consists of:
archtype
cas
classs
checkk
compres
definit
frome
iff
inteval
ith
lod
methode
nd
optin
ot
pres
statics
te
thru
Patch by luzpaz! (This is a subset of D44188 that applies cleanly with a few
files that have dubious fixes reverted.)
Differential revision: https://reviews.llvm.org/D44188
llvm-svn: 329399
Summary:
This patch extend getTargetDefines and implement handleTargetFeatures
and hasFeature. and define corresponding marco for those features.
Reviewers: asb, apazos, eli.friedman
Differential Revision: https://reviews.llvm.org/D44727
Patch by Kito Cheng.
llvm-svn: 329278
Microsoft has reserved 'U' for the PreserveMostCC which is used in the
swift runtime. Add support for this. This allows the swift runtime to
be built for Windows again.
llvm-svn: 329025
Summary:
Allow rN registers to be simply parsed as correspoing xN registers.
The "register ... asm("rN")" is an command to the
compiler's register allocator, not an operand to any individual assembly
instruction. GCC documents this syntax as "...the name of the register
that should be used."
This is needed to support the changes in Linux kernel (see
https://lkml.org/lkml/2018/3/1/268 )
Note: This will add support only for the limited use case of
register ... asm("rN"). Any other uses that make rN leak into assembly
are not supported.
Reviewers: kristof.beyls, rengolin, peter.smith, t.p.northover
Reviewed By: peter.smith
Subscribers: javed.absar, eraman, cfe-commits, srhines
Differential Revision: https://reviews.llvm.org/D44815
llvm-svn: 328829
ObjC and ObjC++ pass non-trivial structs in a way that is incompatible
with each other. For example:
typedef struct {
id f0;
__weak id f1;
} S;
// this code is compiled in c++.
extern "C" {
void foo(S s);
}
void caller() {
// the caller passes the parameter indirectly and destructs it.
foo(S());
}
// this function is compiled in c.
// 'a' is passed directly and is destructed in the callee.
void foo(S a) {
}
This patch fixes the incompatibility by passing and returning structs
with __strong or weak fields using the C ABI in C++ mode. __strong and
__weak fields in a struct do not cause the struct to be destructed in
the caller and __strong fields do not cause the struct to be passed
indirectly.
Also, this patch fixes the microsoft ABI bug mentioned here:
https://reviews.llvm.org/D41039?id=128767#inline-364710
rdar://problem/38887866
Differential Revision: https://reviews.llvm.org/D44908
llvm-svn: 328731
Need to override convertConstraint to recognise amdgpu specific register names.
Differential Revision: https://reviews.llvm.org/D44533
llvm-svn: 328359
For generating NEON intrinsics, this determines the NEON data type, and whether
it should be a half type or an i16 type. I.e., we always pass a half type for
AArch64, this hasn't changed, but now also for ARM but only when FullFP16 is
enabled, and i16 otherwise.
This is intended to be non-functional change, but together with the backend
work in D44538 which adds support for f16 vectors, this enables adding the
AArch32 FP16 (vector) intrinsics.
Differential Revision: https://reviews.llvm.org/D44561
llvm-svn: 327836
This is a partial recommit of r327189 that was reverted
due to test issues. I.e., this recommits minimal functional
change, the FP16 feature test macros, and adds tests that
were missing in the original commit.
llvm-svn: 327455
- Expand GK_*s (i.e. GFX6 -> GFX600, GFX601, etc.)
- This allows us to choose features correctly in some cases (for example, fast fmaf is available on gfx600, but not gfx601)
- Move HasFMAF, HasFP64, HasLDEXPF to GPUInfo tables
- Add HasFastFMA, HasFastFMAF to GPUInfo tables
- Add missing tests
llvm-svn: 326254
Summary:
If the flag -fforce-enable-int128 is passed, it will enable support for __int128_t and __uint128_t types.
This flag can then be used to build compiler-rt for RISCV32.
Reviewers: asb, kito-cheng, apazos, efriedma
Reviewed By: asb, efriedma
Subscribers: shiva0217, efriedma, jfb, dschuff, sdardis, sbc100, jgravelle-google, aheejin, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, cfe-commits
Differential Revision: https://reviews.llvm.org/D43105
llvm-svn: 326045
LLVM has supported a new target feature "alu32" which could be enabled or
disabled by "-mattr=[+|-]alu32" when using llc.
This patch link Clang with it, so it could be also done by passing related
options to Clang, for example:
-Xclang -target-feature -Xclang +alu32
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325996
Cannon Lake does not support CLWB, therefore it
does not include all features listed under SKX.
Patch by Gabor Buella
Differential Revision: https://reviews.llvm.org/D43459
llvm-svn: 325655
This patch provides mitigation for CVE-2017-5715, Spectre variant two,
which affects the P5600 and P6600. It provides the option
-mindirect-jump=hazard, which instructs the LLVM backend to replace
indirect branches with their hazard barrier variants.
This option is accepted when targeting MIPS revision two or later.
The migitation strategy suggested by MIPS for these processors is to
use two hazard barrier instructions. 'jalr.hb' and 'jr.hb' are hazard
barrier variants of the 'jalr' and 'jr' instructions respectively.
These instructions impede the execution of instruction stream until
architecturally defined hazards (changes to the instruction stream,
privileged registers which may affect execution) are cleared. These
instructions in MIPS' designs are not speculated past.
These instructions are used with the option -mindirect-jump=hazard
when branching indirectly and for indirect function calls.
These instructions are defined by the MIPS32R2 ISA, so this mitigation
method is not compatible with processors which implement an earlier
revision of the MIPS ISA.
Implementation note: I've opted to provide this as an
-mindirect-jump={hazard,...} style option in case alternative
mitigation methods are required for other implementations of the MIPS
ISA in future, e.g. retpoline style solutions.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D43487
llvm-svn: 325651
Summary:
Make clang accept `-msahf` (and `-mno-sahf`) flags to activate the
`+sahf` feature for the backend, for bug 36028 (Incorrect use of
pushf/popf enables/disables interrupts on amd64 kernels). This was
originally submitted in bug 36037 by Jonathan Looney
<jonlooney@gmail.com>.
As described there, GCC also uses `-msahf` for this feature, and the
backend already recognizes the `+sahf` feature. All that is needed is to
teach clang to pass this on to the backend.
The mapping of feature support onto CPUs may not be complete; rather, it
was chosen to match LLVM's idea of which CPUs support this feature (see
lib/Target/X86/X86.td).
I also updated the affected test case (CodeGen/attr-target-x86.c) to
match the emitted output.
Reviewers: craig.topper, coby, efriedma, rsmith
Reviewed By: craig.topper
Subscribers: emaste, cfe-commits
Differential Revision: https://reviews.llvm.org/D43394
llvm-svn: 325446
Apparently storing the pointer to a StringLiteral as
a StringRef caused this section of code to issue a ubsan
warning. This will hopefully fix that.
llvm-svn: 324687
What seems to be a bug in older versions of MSVC, constexpr
member arrays with a redefinition (to force emission) require
their initial definition to have the size between the brackets.
llvm-svn: 324682
When rejecting a march= or target-cpu command line parameter,
the message is quite lacking. This patch adds a note that prints
all possible values for the current target, if the target supports it.
This adds support for the ARM/AArch64 targets (more to come!).
Differential Revision: https://reviews.llvm.org/D42978
llvm-svn: 324673
Clang can use CUDA-9.1 now, though new APIs (are not implemented yet.
The major change is that headers in CUDA-9.1 went through substantial
changes that started in CUDA-9.0 which required substantial changes
in the cuda compatibility headers provided by clang.
There are two major issues:
* CUDA SDK no longer provides declarations for libdevice functions.
* A lot of device-side functions have become nvcc's builtins and
CUDA headers no longer contain their implementations.
This patch changes the way CUDA headers are handled if we compile
with CUDA 9.x. Both 9.0 and 9.1 are affected.
* Clang provides its own declarations of libdevice functions.
* For CUDA-9.x clang now provides implementation of device-side
'standard library' functions using libdevice.
This patch should not affect compilation with CUDA-8. There may be
some observable differences for CUDA-9.0, though they are not expected
to affect functionality.
Tested: CUDA test-suite tests for all supported combinations of:
CUDA: 7.0,7.5,8.0,9.0,9.1
GPU: sm_20, sm_35, sm_60, sm_70
Differential Revision: https://reviews.llvm.org/D42513
llvm-svn: 323713
This is to fix the bug reported in https://bugs.llvm.org/show_bug.cgi?id=34347#c6.
Currently, all MaxAtomicInlineWidth of x86-32 targets are set to 64. However,
i386 doesn't support any cmpxchg related instructions. i486 only supports cmpxchg.
So in this patch MaxAtomicInlineWidth is reset as follows:
For i386, the MaxAtomicInlineWidth should be 0 because no cmpxchg is supported.
For i486, the MaxAtomicInlineWidth should be 32 because it supports cmpxchg.
For others 32 bits x86 cpu, the MaxAtomicInlineWidth should be 64 because of cmpxchg8b.
Differential Revision: https://reviews.llvm.org/D42154
llvm-svn: 323281
Summary:
First, we need to explain the core of the vulnerability. Note that this
is a very incomplete description, please see the Project Zero blog post
for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative execution
of the processor to some "gadget" of executable code by poisoning the
prediction of indirect branches with the address of that gadget. The
gadget in turn contains an operation that provides a side channel for
reading data. Most commonly, this will look like a load of secret data
followed by a branch on the loaded value and then a load of some
predictable cache line. The attacker then uses timing of the processors
cache to determine which direction the branch took *in the speculative
execution*, and in turn what one bit of the loaded value was. Due to the
nature of these timing side channels and the branch predictor on Intel
processors, this allows an attacker to leak data only accessible to
a privileged domain (like the kernel) back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In many
cases, the compiler can simply use directed conditional branches and
a small search tree. LLVM already has support for lowering switches in
this way and the first step of this patch is to disable jump-table
lowering of switches and introduce a pass to rewrite explicit indirectbr
sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as
a trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures the
processor predicts the return to go to a controlled, known location. The
retpoline then "smashes" the return address pushed onto the stack by the
call with the desired target of the original indirect call. The result
is a predicted return to the next instruction after a call (which can be
used to trap speculative execution within an infinite loop) and an
actual indirect branch to an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this device.
For 32-bit ABIs there isn't a guaranteed scratch register and so several
different retpoline variants are introduced to use a scratch register if
one is available in the calling convention and to otherwise use direct
stack push/pop sequences to pass the target address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the retpoline
thunk by the compiler to allow for custom thunks if users want them.
These are particularly useful in environments like kernels that
routinely do hot-patching on boot and want to hot-patch their thunk to
different code sequences. They can write this custom thunk and use
`-mretpoline-external-thunk` *in addition* to `-mretpoline`. In this
case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are from
precompiled runtimes (such as crt0.o and similar). The ones we have
found are not really attackable, and so we have not focused on them
here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z retpolineplt`
(or use similar functionality from some other linker). We strongly
recommend also using `-z now` as non-lazy binding allows the
retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typical workloads, and relatively minor hits (approximately 2%)
even for extremely syscall-heavy applications. This is largely due to
the small number of indirect branches that occur in performance
sensitive paths of the kernel.
When using these patches on statically linked applications, especially
C++ applications, you should expect to see a much more dramatic
performance hit. For microbenchmarks that are switch, indirect-, or
virtual-call heavy we have seen overheads ranging from 10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically reduce
the impact of hot indirect calls (by speculatively promoting them to
direct calls) and allow optimized search trees to be used to lower
switches. If you need to deploy these techniques in C++ applications, we
*strongly* recommend that you ensure all hot call targets are statically
linked (avoiding PLT indirection) and use both PGO and ThinLTO. Well
tuned servers using all of these techniques saw 5% - 10% overhead from
the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality available
as soon as possible. Happy for more code review, but we'd really like to
get these patches landed and backported ASAP for obvious reasons. We're
planning to backport this to both 6.0 and 5.0 release streams and get
a 5.0 release with just this cherry picked ASAP for distros and vendors.
This patch is the work of a number of people over the past month: Eric, Reid,
Rui, and myself. I'm mailing it out as a single commit due to the time
sensitive nature of landing this and the need to backport it. Huge thanks to
everyone who helped out here, and everyone at Intel who helped out in
discussions about how to craft this. Also, credit goes to Paul Turner (at
Google, but not an LLVM contributor) for much of the underlying retpoline
design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
llvm-svn: 323155
As RV64 codegen has not yet been upstreamed into LLVM, we focus on RV32 driver
support (RV64 to follow).
Differential Revision: https://reviews.llvm.org/D39963
llvm-svn: 322276
Similarly, make -mno-fma and -mno-f16c imply -mno-avx512f.
Withou this "-mno-sse -mavx512f" ends up with avx512f being enabled in the frontend but disabled in the backend.
llvm-svn: 322245
Cf-protection is a target independent flag that instructs the back-end to instrument control flow mechanisms like: Branch, Return, etc.
For example in X86 this flag will be used to instrument Indirect Branch Tracking instructions.
Differential Revision: https://reviews.llvm.org/D40478
Change-Id: I5126e766c0e6b84118cae0ee8a20fe78cc373dea
llvm-svn: 322063
GCC's attribute 'target', in addition to being an optimization hint,
also allows function multiversioning. We currently have the former
implemented, this is the latter's implementation.
This works by enabling functions with the same name/signature to coexist,
so that they can all be emitted. Multiversion state is stored in the
FunctionDecl itself, and SemaDecl manages the definitions.
Note that it ends up having to permit redefinition of functions so
that they can all be emitted. Additionally, all versions of the function
must be emitted, so this also manages that.
Note that this includes some additional rules that GCC does not, since
defining something as a MultiVersion function after a usage has been made illegal.
The only 'history rewriting' that happens is if a function is emitted before
it has been converted to a multiversion'ed function, at which point its name
needs to be changed.
Function templates and virtual functions are NOT yet supported (not supported
in GCC either).
Additionally, constructors/destructors are disallowed, but the former is
planned.
llvm-svn: 322028
I based that commit on what was in Intel's public documentation here https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
Which specifically said CLWB wasn't until Icelake.
But I've since cross checked with SDE and it thinks these features exist on CNL and ICL. So now I don't know what to believe.
I've added test coverage of the current behavior as part of the revert so at least now have proof of what we're doing.
llvm-svn: 321547
We have cannonlake and icelake inheriting from skylake server in a switch using fallthroughs. But they aren't perfect supersets of skylake server.
llvm-svn: 321504
added vbmi2 feature recognition
added intrinsics support for vbmi2 instructions
_mm[128,256,512]_mask[z]_compress_epi[16,32]
_mm[128,256,512]_mask_compressstoreu_epi[16,32]
_mm[128,256,512]_mask[z]_expand_epi[16,32]
_mm[128,256,512]_mask[z]_expandloadu_epi[16,32]
_mm[128,256,512]_mask[z]_sh[l,r]di_epi[16,32,64]
_mm[128,256,512]_mask_sh[l,r]dv_epi[16,32,64]
matching a similar work on the backend (D40206)
Differential Revision: https://reviews.llvm.org/D41557
llvm-svn: 321487
added vpclmulqdq feature recognition
added intrinsics support for vpclmulqdq instructions
_mm256_clmulepi64_epi128
_mm512_clmulepi64_epi128
matching a similar work on the backend (D40101)
Differential Revision: https://reviews.llvm.org/D41573
llvm-svn: 321480
added vaes feature recognition
added intrinsics support for vaes instructions, matching a similar work on the backend (D40078)
_mm256_aesenc_epi128
_mm512_aesenc_epi128
_mm256_aesenclast_epi128
_mm512_aesenclast_epi128
_mm256_aesdec_epi128
_mm512_aesdec_epi128
_mm256_aesdeclast_epi128
_mm512_aesdeclast_epi128
llvm-svn: 321474
https://bugs.llvm.org/show_bug.cgi?id=35721 reports that x86intrin.h
is issuing a few warnings. This is because attribute target is using
isValidFeatureName for its source. It was also discovered that two of
these were missing from hasFeature.
Additionally, shstk is and ibu are reordered alphabetically, as came
up during code review.
llvm-svn: 321324
microMIPS64R6 is removed from backend, and therefore frontend
will show an error when target is microMIPS64R6.
This is Clang part of patch.
Differential Revision: https://reviews.llvm.org/D35624
llvm-svn: 320351
This commit fixes a bug in IRGen where it generates completely broken
code for __fp16 vectors on X86. For example when the following code is
compiled:
half4 hv0, hv1, hv2; // these are vectors of __fp16.
void foo221() {
hv0 = hv1 + hv2;
}
clang generates the following IR, in which two i16 vectors are added:
@hv1 = common global <4 x i16> zeroinitializer, align 8
@hv2 = common global <4 x i16> zeroinitializer, align 8
@hv0 = common global <4 x i16> zeroinitializer, align 8
define void @foo221() {
%0 = load <4 x i16>, <4 x i16>* @hv1, align 8
%1 = load <4 x i16>, <4 x i16>* @hv2, align 8
%add = add <4 x i16> %0, %1
store <4 x i16> %add, <4 x i16>* @hv0, align 8
ret void
}
To fix the bug, this commit uses the code committed in r314056, which
modified clang to promote and truncate __fp16 vectors to and from float
vectors in the AST. It also fixes another IRGen bug where a short value
is assigned to an __fp16 variable without any integer-to-floating-point
conversion, as shown in the following example:
__fp16 a;
short b;
void foo1() {
a = b;
}
@b = common global i16 0, align 2
@a = common global i16 0, align 2
define void @foo1() #0 {
%0 = load i16, i16* @b, align 2
store i16 %0, i16* @a, align 2
ret void
}
rdar://problem/20625184
Differential Revision: https://reviews.llvm.org/D40112
llvm-svn: 320215
Commit 7ac28eb0a5 / r310911 ("[OpenCL] Allow targets to select address
space per type", 2017-08-15) made Basic depend on AST, introducing a
circular dependency. Break this dependency by adding the
OpenCLTypeKind enum in Basic and map from AST types to this enum in
ASTContext.
Differential Revision: https://reviews.llvm.org/D40838
llvm-svn: 319883
This is a re-apply of r319294.
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
-fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
llvm-svn: 319297
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
clang cc1 assumes dwarf is the default if none is passed
and -fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
llvm-svn: 319294
Shadow stack solution introduces a new stack for return addresses only.
The stack has a Shadow Stack Pointer (SSP) that points to the last address to which we expect to return.
If we return to a different address an exception is triggered.
This patch includes shadow stack intrinsics as well as the corresponding CET header.
It includes CET clang flags for shadow stack and Indirect Branch Tracking.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40224
Change-Id: I79ad0925a028bbc94c8ecad75f6daa2f214171f1
llvm-svn: 318995
move _WIN64 and _WIN32 defines to lib/Basic/Targets/OSTargets.h
move WIN32, WIN64 and __MINGW64__ to addMinGWDefines
fixes __MINGW64__ not being defined for aarch64
adds WIN32 definition for x64
Reviewers: mstorsjo
Differential Revision: https://reviews.llvm.org/D40285
llvm-svn: 318755
Some target devices (e.g. Nvidia GPUs) don't support dynamic stack
allocation and hence no VLAs. Print errors with description instead
of failing in the backend or generating code that doesn't work.
This patch handles explicit uses of VLAs (local variable in target
or declare target region) or implicitly generated (private) VLAs
for reductions on VLAs or on array sections with non-constant size.
Differential Revision: https://reviews.llvm.org/D39505
llvm-svn: 318601
Since SVN r318510, the MinGW/ARM configuration defaults to
dwarf exception handling.
Differential Revision: https://reviews.llvm.org/D39533
llvm-svn: 318511
A first step toward removing the repetition of
features/CPU info in the x86 target info, this
patch pulls all the processor information out into
its own .def file.
Differential Revision: https://reviews.llvm.org/D40093
llvm-svn: 318343
LLVM exposes a file in the backend (X86TargetParser.def) that
contains information about the correct list of CpuIs values.
This patch removes 2 of the copied and pasted versions of this
list from clang and instead includes the data from the .def file.
Differential Revision: https://reviews.llvm.org/D40054
llvm-svn: 318234
The existing coverage for the Darwin targets wasn't enough to catch all
the variations. Improve the coverage a bit further and fix a few cases
for Darwin targets.
llvm-svn: 316826
Centralise the definitions of these compiler vended types to aid
inspection to ensure that they are defined similarly. The one case that
stands out is the Darwin case where the types do not match up. This
fixes the API conformance for APCS-GNU as well.
llvm-svn: 316810
Craig noticed that CodeGen wasn't properly ignoring the
values sent to the target attribute. This patch ignores
them.
This patch also sets the 'default' for this checking to
'supported', since only X86 has implemented the support
for checking valid CPU names and Feature Names.
One test was changed to i686, since it uses a lakemont,
which would otherwise be prohibited in x86_64.
Differential Revision: https://reviews.llvm.org/D39357
llvm-svn: 316783
These are not valid values for this, and are pretty
non-sensical, since LLVM doesn't understand them.
Differential Revision: https://reviews.llvm.org/D39378
llvm-svn: 316781
I think the only reason they are different is because we don't set tune_i686 for -march=i686 to match GCC. But GCC 4.9.0 seems to have changed this behavior and they do set it now. So I think they can aliases now.
Differential Revision: https://reviews.llvm.org/D39349
llvm-svn: 316712
As indicated by Table 1-1 in Intel Architecture Instruction Set Extensions and Future Features Programming Reference from October 2017.
llvm-svn: 316593
NetBSD uses `long int` for `intptr_t` on ARM. This was changed in SVN
r316046, referenced against other compilers. However, NetBSD's
reference was incorrect as the current clang behaviour is more
up-to-date. Restore the original behaviour for that target.
llvm-svn: 316204
This patch has the following changes
A new flag "-mhvx-length={64B|128B}" is introduced to specify the length of the vector.
Previously we have used "-mhvx-double" for 128 Bytes. This adds the target-feature "+hvx-length{64|128}b"
The "-mhvx" flag must be provided on command line to enable HVX for Hexagon. If no -mhvx-length flag
is specified, a default length is picked from the arch mentioned in this priority order from either -mhvx=vxx
or -mcpu. For v60 and v62 the default length is 64 Byte. For unknown versions, the length is 128 Byte. The
-mhvx flag adds the target-feature "+hvxv{hvx_version}"
The 64 Byte mode is soon going to be deprecated. A warning is emitted if 64 Byte is enabled. A warning is
still emitted for the default 64 Byte as well. This warning can be suppressed with a -Wno flag.
The "-mhvx-double" and "-mno-hvx-double" flags are deprecated. A warning is emitted if the driver sees
them on commandline. "-mhvx-double" is an alias to "-mhvx-length=128B"
The compilation will error out if -mhvx-length is specified with out an -mhvx/-mhvx= flag
The macro HVX_LENGTH is defined and is set to the length of the vector.
Eg: #define HVX_LENGTH 64
The macro HVX_ARCH is defined and is set to the version of the HVX.
Eg: #define HVX_ARCH 62
Differential Revision: https://reviews.llvm.org/D38852
llvm-svn: 316102
Darwin and OpenBSD are the only platforms which use `long int` for
`__INTPTR_TYPE__`. The other platforms use `int` in 32-bit, and `long
int` on 64-bit (except for VMS and Windows which are LLP64). Adjust the
type definitions to match the platform definitions. We now generate the
same definition as GCC on all the targets.
llvm-svn: 316046
Summary:
Convert clang::LangAS to a strongly typed enum
Currently both clang AST address spaces and target specific address spaces
are represented as unsigned which can lead to subtle errors if the wrong
type is passed. It is especially confusing in the CodeGen files as it is
not possible to see what kind of address space should be passed to a
function without looking at the implementation.
I originally made this change for our LLVM fork for the CHERI architecture
where we make extensive use of address spaces to differentiate between
capabilities and pointers. When merging the upstream changes I usually
run into some test failures or runtime crashes because the wrong kind of
address space is passed to a function. By converting the LangAS enum to a
C++11 we can catch these errors at compile time. Additionally, it is now
obvious from the function signature which kind of address space it expects.
I found the following errors while writing this patch:
- ItaniumRecordLayoutBuilder::LayoutField was passing a clang AST address
space to TargetInfo::getPointer{Width,Align}()
- TypePrinter::printAttributedAfter() prints the numeric value of the
clang AST address space instead of the target address space.
However, this code is not used so I kept the current behaviour
- initializeForBlockHeader() in CGBlocks.cpp was passing
LangAS::opencl_generic to TargetInfo::getPointer{Width,Align}()
- CodeGenFunction::EmitBlockLiteral() was passing a AST address space to
TargetInfo::getPointerWidth()
- CGOpenMPRuntimeNVPTX::translateParameter() passed a target address space
to Qualifiers::addAddressSpace()
- CGOpenMPRuntimeNVPTX::getParameterAddress() was using
llvm::Type::getPointerTo() with a AST address space
- clang_getAddressSpace() returns either a LangAS or a target address
space. As this is exposed to C I have kept the current behaviour and
added a comment stating that it is probably not correct.
Other than this the patch should not cause any functional changes.
Reviewers: yaxunl, pcc, bader
Reviewed By: yaxunl, bader
Subscribers: jlebar, jholewinski, nhaehnle, Anastasia, cfe-commits
Differential Revision: https://reviews.llvm.org/D38816
llvm-svn: 315871
Currently Clang uses default address space (0) to represent private address space for OpenCL
in AST. There are two issues with this:
Multiple address spaces including private address space cannot be diagnosed.
There is no mangling for default address space. For example, if private int* is emitted as
i32 addrspace(5)* in IR. It is supposed to be mangled as PUAS5i but it is mangled as
Pi instead.
This patch attempts to represent OpenCL private address space explicitly in AST. It adds
a new enum LangAS::opencl_private and adds it to the variable types which are implicitly
private:
automatic variables without address space qualifier
function parameter
pointee type without address space qualifier (OpenCL 1.2 and below)
Differential Revision: https://reviews.llvm.org/D35082
llvm-svn: 315668
Move the logic for determining the `wchar_t` type information into the
driver. Rather than passing the single bit of information of
`-fshort-wchar` indicate to the frontend the desired type of `wchar_t`
through a new `-cc1` option of `-fwchar-type` and indicate the
signedness through `-f{,no-}signed-wchar`. This replicates the current
logic which was spread throughout Basic into the
`RenderCharacterOptions`.
Most of the changes to the tests are to ensure that the frontend uses
the correct type. Add a new test set under `test/Driver/wchar_t.c` to
ensure that we calculate the proper types for the various cases.
llvm-svn: 315126
Summary:
Also:
- Add support for some older Myriad CPUs that were missing.
- Fix some incorrect compiler defines for exisitng CPUs.
Reviewers: jyknight
Subscribers: fedor.sergeev
Differential Revision: https://reviews.llvm.org/D37551
llvm-svn: 314706
Currently AMDGPU inline asm only allow v and s as register names in constraints.
This patch allows the following register names in constraints: (n, m is unsigned integer, n < m)
v
s
{vn} or {v[n]}
{sn} or {s[n]}
{S} , where S is a special register name
{v[n:m]}
{s[n:m]}
Differential Revision: https://reviews.llvm.org/D37568
llvm-svn: 314452
This is to fix PR31620. MaxAtomicInlineWidth is set to 128 for x86_64. However
for target without cx16 support, 128 atomic operation will generate __sync_*
libcalls. The patch set MaxAtomicInlineWidth to 64 if the target doesn't support
cx16.
Differential Revision: https://reviews.llvm.org/D38046
llvm-svn: 313992
This arranges more of the Intel and AMD CPUs into fallthrough positions based on their features. We may be able to merge this new AMD set with the BTVER or BDVER sets but I didn't look that closely.
Differential Revision: https://reviews.llvm.org/D37941
llvm-svn: 313497
Summary:
For a lot of older CPUs we have a 1:1 mapping between CPU name and enum name. But many of them are effectively aliases of each other and as a result are always repeated together at every usage
This patch removes most of the duplication. It also uses StringSwitch::Cases to make the many to one mapping in the StringSwitch more obvious.
Reviewers: RKSimon, spatel, zvi, igorb
Reviewed By: RKSimon
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D37938
llvm-svn: 313462
For now CUDA-9 is not included in the list of CUDA versions clang
searches for, so the path to CUDA-9 must be explicitly passed
via --cuda-path=.
On LLVM side NVPTX added sm_70 GPU type which bumps required
PTX version to 6.0, but otherwise is equivalent to sm_62 at the moment.
Differential Revision: https://reviews.llvm.org/D37576
llvm-svn: 312734
In patch r205628 using abs.[ds] instruction is forced, as they should behave
in accordance with flags Has2008 and ABS2008. Unfortunately for revisions
prior mips32r6 and mips64r6, abs.[ds] is not generating correct result when
working with NaNs. To generate a sequence which always produce a correct
result but also to allow user more control on how his code is compiled,
option -mabs is added where user can choose legacy or 2008.
By default legacy mode is used on revisions prior R6. Mips32r6 and mips64r6
use abs2008 mode by default.
Patch by Aleksandar Beserminji
Differential Revision: https://reviews.llvm.org/D35982
llvm-svn: 311669
This patch is intended to enable the use of basic double letter constraints used in GCC extended inline asm {Yi Y2 Yz Y0 Ym Yt}.
Supersedes D35205
llvm counterpart: D36369
Differential Revision: https://reviews.llvm.org/D36371
llvm-svn: 311643
Rename the function getSupportedNanEncoding() to getIEEE754Standard(), since
this function will be used for non-nan related features.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D36824
llvm-svn: 311454
Generalize getOpenCLImageAddrSpace into getOpenCLTypeAddrSpace, such
that targets can select the address space per type.
No functional changes intended.
Initial patch by Simon Perretta.
Differential Revision: https://reviews.llvm.org/D33989
llvm-svn: 310911
This patch adds support for __builtin_cpu_is. I've tried to match the strings supported to the latest version of gcc.
Differential Revision: https://reviews.llvm.org/D35449
llvm-svn: 310657
They still need to be implemented in the intrinsics, the command line, and the backend. But this change isn't dependent on any of that and resolves a TODO.
llvm-svn: 310386
This is similar to what's done on arm and x86_64, where
these calling conventions are silently ignored, as in
SVN r245076.
Differential Revision: https://reviews.llvm.org/D36105
llvm-svn: 310303
OpenCL 2.0 atomic builtin functions have a scope argument which is ideally
represented as synchronization scope argument in LLVM atomic instructions.
Clang supports translating Clang atomic builtin functions to LLVM atomic
instructions. However it currently does not support synchronization scope
of LLVM atomic instructions. Without this, users have to use LLVM assembly
code to implement OpenCL atomic builtin functions.
This patch adds OpenCL 2.0 atomic builtin functions as Clang builtin
functions, which supports generating LLVM atomic instructions with
synchronization scope operand.
Currently only constant memory scope argument is supported. Support of
non-constant memory scope argument will be added later.
Differential Revision: https://reviews.llvm.org/D28691
llvm-svn: 310082
This is causing failures when compiling clang with -O3
as one of the structures used by clang is passed by
value and uses the fastcc calling convention.
Faliures manifest for stage2 mips build.
llvm-svn: 310057
Summary: This is required by the libc++ locale support.
Reviewers: jyknight
Subscribers: fedor.sergeev
Differential Revision: https://reviews.llvm.org/D36121
llvm-svn: 309815
This fixes a dependency inconsistency, where addMinGWDefines in Targets.cpp
(used from other architectures than X86) called the addCygMingDefines function
in X86.h.
This was inconsistently split in SVN r308791 (D35701).
Differential Revision: https://reviews.llvm.org/D36072
llvm-svn: 309598
Allows the incorporation of legit (x86) Control Regs within inline asm stataements
Differential Revision: https://reviews.llvm.org/D35903
llvm-svn: 309508
r303175 made changes to have __cxa_allocate_exception return a 16-byte
aligned pointer, so it's no longer necessary to specify a lower
alignment (8-bytes) for exception objects on Darwin.
rdar://problem/32363695
llvm-svn: 309308
Targets.cpp is getting unwieldy, and even minor changes cause the entire thing
to cause recompilation for everyone. This patch bites the bullet and breaks
it up into a number of files.
I tended to keep function definitions in the class declaration unless it
caused additional includes to be necessary. In those cases, I pulled it
over into the .cpp file. Content is copy/paste for the most part,
besides includes/format/etc.
Differential Revision: https://reviews.llvm.org/D35701
llvm-svn: 308791
Kristina Brooks