This merges more AMDGPU ABI lowering code into the generic call
lowering. Start cleaning up by factoring away more of the pack/unpack
logic into the buildCopy{To|From}Parts functions. These could use more
improvement, and the SelectionDAG versions are significantly more
complex, and we'll eventually have to emulate all of those cases too.
This is mostly NFC, but does result in some minor instruction
reordering. It also removes some of the limitations with mismatched
sizes the old code had. However, similarly to the merge on the input,
this is forcing gfx6/gfx7 to use the gfx8+ ABI (which is what we
actually want, but SelectionDAG is stuck using the weird emergent
ABI).
This also changes the load/store size for stack passed EVTs for
AArch64, which makes it consistent with the DAG behavior.
For the cases of two clobbering loads and one loaded object is fully contained
in the second `BasicAAResult::aliasGEP` returns just `PartialAlias` that
is actually more common case of partial overlap, it doesn't say anything about
actual overlapping sizes.
AA users such as GVN and DSE have no functionality to estimate aliasing of GEPs
with non-constant offsets. The change stores estimated relative offsets so they
can be used further.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93529
remove `Hi` `Lo` argument from `emitDwarfUnitLength`, so we
can make caller of emitDwarfUnitLength easier.
Reviewed By: MaskRay, dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D96409
We will pass StringRef and change it in reader.
But we reuse the same Filename vector without clear it,
so in some systems, we may clobbeer previous results.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D97353
We may need to do some customization for DWARF unit length in DWARF
section headers for some targets for some code generation path.
For example, for XCOFF in assembly path, AIX assembler does not require
the debug section containing its debug unit length in the header.
Move emitDwarfUnitLength to MCStreamer class so that we can do
customization in different Streamers
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D95932
This CL is not big but contains changes that span multiple analyses and
passes. This description is very long because it tries to explain basics
on what each pass/analysis does and why we need this change on top of
that. Please feel free to skip parts that are not necessary for your
understanding.
---
`WasmEHFuncInfo` contains the mapping of <EH pad, the EH pad's next
unwind destination>. The value (unwind dest) here is where an exception
should end up when it is not caught by the key (EH pad). We record this
info in WasmEHPrepare to fix catch mismatches, because the CFG itself
does not have this info. A CFG only contains BBs and
predecessor-successor relationship between them, but in `WasmEHFuncInfo`
the unwind destination BB is not necessarily a successor or the key EH
pad BB. Their relationship can be intuitively explained by this C++ code
snippet:
```
try {
try {
foo();
} catch (int) { // EH pad
...
}
} catch (...) { // unwind destination
}
```
So when `foo()` throws, it goes to `catch (int)` first. But if it is not
caught by it, it ends up in the next unwind destination `catch (...)`.
This unwind destination is what you see in `catchswitch`'s
`unwind label %bb` part.
---
`WebAssemblyExceptionInfo` groups exceptions so that they can be sorted
continuously together in CFGSort, as we do for loops. What this analysis
does is very simple: it creates a single `WebAssemblyException` per EH
pad, and all BBs that are dominated by that EH pad are included in this
exception. We also identify subexception relationship in this way: if
EHPad A domiantes EHPad B, EHPad B's exception is a subexception of
EHPad A's exception.
This simple rule turns out to be incorrect in some cases. In
`WasmEHFuncInfo`, if EHPad A's unwind destination is EHPad B, it means
semantically EHPad B should not be included in EHPad A's exception,
because it does not make sense to rethrow/delegate to an inner scope.
This is what happened in CFGStackify as a result of this:
```
try
try
catch
... <- %dest_bb is among here!
end
delegate %dest_bb
```
So this patch adds a phase in `WebAssemblyExceptionInfo::recalculate` to
make sure excptions' unwind destinations are not subexceptions of
their unwind sources in `WasmEHFuncInfo`.
But this alone does not prevent `dest_bb` in the example above from
being sorted within the inner `catch`'s exception, even if its exception
is not a subexception of that `catch`'s exception anymore, because of
how CFGSort works, which will be explained below.
---
CFGSort places BBs within the same `SortRegion` (loop or exception)
continuously together so they can be demarcated with `loop`-`end_loop`
or `catch`-`end_try` in CFGStackify.
`SortRegion` is a wrapper for one of `MachineLoop` or
`WebAssemblyException`. `SortRegionInfo` already does some complicated
things because there discrepancies between those two data structures.
`WebAssemblyException` is what we control, and it is defined as an EH
pad as its header and BBs dominated by the header as its BBs (with a
newly added exception of unwind destinations explained in the previous
paragraph). But `MachineLoop` is an LLVM data structure and uses the
standard loop detection algorithm. So by the algorithm, BBs that are 1.
dominated by the loop header and 2. have a path back to its header.
Because of the second condition, many BBs that are dominated by the loop
header are not included in the loop. So BBs that contain `return` or
branches to outside of the loop are not technically included in
`MachineLoop`, but they can be sorted together with the loop with no
problem.
Maybe to relax the condition, in CFGSort, when we are in a `SortRegion`
we allow sorting of not only BBs that belong to the current innermost
region but also BBs that are by the current region header.
(This was written this way from the first version written by Dan, when
only loops existed.) But now, we have cases in exceptions when EHPad B
is the unwind destination for EHPad A, even if EHPad B is dominated by
EHPad A it should not be included in EHPad A's exception, and should not
be sorted within EHPad A.
One way to make things work, at least correctly, is change `dominates`
condition to `contains` condition for `SortRegion` when sorting BBs, but
this will change compilation results for existing non-EH code and I
can't be sure it will not degrade performance or code size. I think it
will degrade performance because it will force many BBs dominated by a
loop, which don't have the path back to the header, to be placed after
the loop and it will likely to create more branches and blocks.
So this does a little hacky check when adding BBs to `Preferred` list:
(`Preferred` list is a ready list. CFGSort maintains ready list in two
priority queues: `Preferred` and `Ready`. I'm not very sure why, but it
was written that way from the beginning. BBs are first added to
`Preferred` list and then some of them are pushed to `Ready` list, so
here we only need to guard condition for `Preferred` list.)
When adding a BB to `Preferred` list, we check if that BB is an unwind
destination of another BB. To do this, this adds the reverse mapping,
`UnwindDestToSrc`, and getter methods to `WasmEHFuncInfo`. And if the BB
is an unwind destination, it checks if the current stack of regions
(`Entries`) contains its source BB by traversing the stack backwards. If
we find its unwind source in there, we add the BB to its `Deferred`
list, to make sure that unwind destination BB is added to `Preferred`
list only after that region with the unwind source BB is sorted and
popped from the stack.
---
This does not contain a new test that crashes because of this bug, but
this fix changes the result for one of existing test case. This test
case didn't crash because it fortunately didn't contain `delegate` to
the incorrectly placed unwind destination BB.
Fixes https://github.com/emscripten-core/emscripten/issues/13514.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D97247
If resulting size of the output stream is already known,
then the space for stream data could be preliminary
allocated in some cases. f.e. raw_string_ostream could
preallocate the space for the target string(it allows
to avoid reallocations during writing into the stream).
Differential Revision: https://reviews.llvm.org/D91693
When one of the inputs is a wrapping range, intersect with the
union of the two inputs. The union of the two inputs corresponds
to the result we would get if we treated the min/max as a simple
select.
This fixes PR48643.
We don't need any special handling for wrapping ranges (or empty
ranges for that matter). The sub() call will already compute a
correct and precise range.
We only need to adjust the test expectation: We're now computing
an optimal result, rather than an unsigned envelope.
When the optimality check fails, print the inputs, the computed
range and the better range that was found. This makes it much
simpler to identify the cause of the failure.
Make sure that full ranges (which, unlikely all the other cases,
have multiple ways to construct them that all result in the same
range) only print one message by handling them separately.
The current infrastructure for exhaustive ConstantRange testing is
somewhat confusing in what exactly it tests and currently cannot even
be used for operations that produce smallest-size results, rather than
signed/unsigned envelopes.
This patch makes the testing more principled by collecting the exact
set of results of an operation into a bit set and then comparing it
against the range approximation by:
* Checking conservative correctness: All elements in the set must be
in the range.
* Checking optimality under a given preference function: None of the
(slack-free) ranges that can be constructed from the set are
preferred over the computed range.
Implemented preference functions are:
* PreferSmallest: Smallest range regardless of signed/unsigned wrapping
behavior. Probably what we would call "optimal" without further
qualification.
* PreferSmallestUnsigned/Signed: Smallest range that has no
unsigned/signed wrapping. We use this if our calculation is precise
only up to signed/unsigned envelope.
* PreferSmallestNonFullUnsigned/Signed: Smallest range that has no
unsigned/signed wrapping -- but preferring a smaller wrapping range
over a (non-wrapping) full range. We use this if we have a fully
precise calculation but apply a sign preference to the result
(union/intersection). Even with a sign preference, returning a
wrapping range is still "strictly better" than returning a full one.
This also addresses PR49273 by replacing the fragile manual range
construction logic in testBinarySetOperationExhaustive() with generic
code that isn't specialized to the particular form of ranges that set
operations can produces.
Differential Revision: https://reviews.llvm.org/D88356
As discussed on the RFC [0], I am sharing the set of patches that
enables checking of original Debug Info metadata preservation in
optimizations. The proof-of-concept/proposal can be found at [1].
The implementation from the [1] was full of duplicated code,
so this set of patches tries to merge this approach into the existing
debugify utility.
For example, the utility pass in the original-debuginfo-check
mode could be invoked as follows:
$ opt -verify-debuginfo-preserve -pass-to-test sample.ll
Since this is very initial stage of the implementation,
there is a space for improvements such as:
- Add support for the new pass manager
- Add support for metadata other than DILocations and DISubprograms
[0] https://groups.google.com/forum/#!msg/llvm-dev/QOyF-38YPlE/G213uiuwCAAJ
[1] https://github.com/djolertrk/llvm-di-checker
Differential Revision: https://reviews.llvm.org/D82545
The test that was failing is now forced to use the old PM.
We currently always store absolute filenames in coverage mapping. This
is problematic for several reasons. It poses a problem for distributed
compilation as source location might vary across machines. We are also
duplicating the path prefix potentially wasting space.
This change modifies how we store filenames in coverage mapping. Rather
than absolute paths, it stores the compilation directory and file paths
as given to the compiler, either relative or absolute. Later when
reading the coverage mapping information, we recombine relative paths
with the working directory. This approach is similar to handling
ofDW_AT_comp_dir in DWARF.
Finally, we also provide a new option, -fprofile-compilation-dir akin
to -fdebug-compilation-dir which can be used to manually override the
compilation directory which is useful in distributed compilation cases.
Differential Revision: https://reviews.llvm.org/D95753
We currently always store absolute filenames in coverage mapping. This
is problematic for several reasons. It poses a problem for distributed
compilation as source location might vary across machines. We are also
duplicating the path prefix potentially wasting space.
This change modifies how we store filenames in coverage mapping. Rather
than absolute paths, it stores the compilation directory and file paths
as given to the compiler, either relative or absolute. Later when
reading the coverage mapping information, we recombine relative paths
with the working directory. This approach is similar to handling
ofDW_AT_comp_dir in DWARF.
Finally, we also provide a new option, -fprofile-compilation-dir akin
to -fdebug-compilation-dir which can be used to manually override the
compilation directory which is useful in distributed compilation cases.
Differential Revision: https://reviews.llvm.org/D95753
This patch adds functionality to compare for the equality between `InterfaceFile`s based on attributes specific to linking.
Reviewed By: cishida, steven_wu
Differential Revision: https://reviews.llvm.org/D96629
As discussed on the RFC [0], I am sharing the set of patches that
enables checking of original Debug Info metadata preservation in
optimizations. The proof-of-concept/proposal can be found at [1].
The implementation from the [1] was full of duplicated code,
so this set of patches tries to merge this approach into the existing
debugify utility.
For example, the utility pass in the original-debuginfo-check
mode could be invoked as follows:
$ opt -verify-debuginfo-preserve -pass-to-test sample.ll
Since this is very initial stage of the implementation,
there is a space for improvements such as:
- Add support for the new pass manager
- Add support for metadata other than DILocations and DISubprograms
[0] https://groups.google.com/forum/#!msg/llvm-dev/QOyF-38YPlE/G213uiuwCAAJ
[1] https://github.com/djolertrk/llvm-di-checker
Differential Revision: https://reviews.llvm.org/D82545
Same implementation as G_SEXT_INREG.
Add a testcase to combine-sext-inreg for a concrete example, and a testcase
to KnownBitsTest.
Differential Revision: https://reviews.llvm.org/D96897
We can't construct a working unique_function from an object that's not callable
with the right types, so don't allow deduction to succeed.
This avoids some ambiguous conversion cases, e.g. allowing to overload
on different unique_function types, and to conversion operators to
unique_function.
std::function and the any_invocable proposal have these.
This was added to llvm::function_ref in D88901 and followups
Differential Revision: https://reviews.llvm.org/D96794
The GPUDivergenceAnalysis is now renamed to just "DivergenceAnalysis"
since there is no conflict with LegacyDivergenceAnalysis. In the
legacy PM, this analysis can only be used through the legacy DA
serving as a wrapper. It is now made available as a pass in the new
PM, and has no relation with the legacy DA.
The new DA currently cannot handle irreducible control flow; its
presence can cause the analysis to run indefinitely. The analysis is
now modified to detect this and report all instructions in the
function as divergent. This is super conservative, but allows the
analysis to be used without hanging the compiler.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D96615
This commit fixes how metadata is handled in CloneModule to be sound,
and improves how it's handled in CloneFunctionInto (although the latter
is still awkward when called within a module).
Ruiling Song pointed out in PR48841 that CloneModule was changed to
unsoundly use the RF_ReuseAndMutateDistinctMDs flag (renamed in
fa35c1f80f for clarity). This flag papered
over a crash caused by other various changes made to CloneFunctionInto
over the past few years that made it unsound to use cloning between
different modules.
(This commit partially addresses PR48841, fixing the repro from
preprocessed source but not textual IR. MDNodeMapper::mapDistinctNode
became unsound in df763188c9 and this
commit does not address that regression.)
RF_ReuseAndMutateDistinctMDs is designed for the IRMover to use,
avoiding unnecessary clones of all referenced metadata when linking
between modules (with IRMover, the source module is discarded after
linking). It never makes sense to use when you're not discarding the
source. This commit drops its incorrect use in CloneModule.
Sadly, the right thing to do with metadata when cloning a function is
complicated, and this patch doesn't totally fix it.
The first problem is that there are two different types of referenceable
metadata and it's not obvious what to with one of them when remapping.
- `!0 = !{!1}` is metadata's version of a constant. Programatically it's
called "uniqued" (probably a better term would be "constant") because,
like `ConstantArray`, it's stored in uniquing tables. Once it's
constructed, it's illegal to change its arguments.
- `!0 = distinct !{!1}` is a bit closer to a global variable. It's legal
to change the operands after construction.
What should be done with distinct metadata when cloning functions within
the same module?
- Should new, cloned nodes be created?
- Should all references point to the same, old nodes?
The answer depends on whether that metadata is effectively owned by a
function.
And that's the second problem. Referenceable metadata's ownership model
is not clear or explicit. Technically, it's all stored on an
LLVMContext. However, any metadata that is `distinct`, that transitively
references a `distinct` node, or that transitively references a
GlobalValue is specific to a Module and is effectively owned by it. More
specifically, some metadata is effectively owned by a specific Function
within a module.
Effectively function-local metadata was introduced somewhere around
c10d0e5ccd, which made it illegal for two
functions to share a DISubprogram attachment.
When cloning a function within a module, you need to clone the
function-local debug info and suppress cloning of global debug info (the
status quo suppresses cloning some global debug info but not all). When
cloning a function to a new/different module, you need to clone all of
the debug info.
Here's what I think we should do (eventually? soon? not this patch
though):
- Distinguish explicitly (somehow) between pure constant metadata owned
by the LLVMContext, global metadata owned by the Module, and local
metadata owned by a GlobalValue (such as a function).
- Update CloneFunctionInto to trigger cloning of all "local" metadata
(only), perhaps by adding a bit to RemapFlag. Alternatively, split
out a separate function CloneFunctionMetadataInto to prime the
metadata map that callers are updated to call ahead of time as
appropriate.
Here's the somewhat more isolated fix in this patch:
- Converted the `ModuleLevelChanges` parameter to `CloneFunctionInto` to
an enum called `CloneFunctionChangeType` that is one of
LocalChangesOnly, GlobalChanges, DifferentModule, and ClonedModule.
- The code maintaining the "functions uniquely own subprograms"
invariant is now only active in the first two cases, where a function
is being cloned within a single module. That's necessary because this
code inhibits cloning of (some) "global" metadata that's effectively
owned by the module.
- The code maintaining the "all compile units must be explicitly
referenced by !llvm.dbg.cu" invariant is now only active in the
DifferentModule case, where a function is being cloned into a new
module in isolation.
- CoroSplit.cpp's call to CloneFunctionInto in CoroCloner::create
uses LocalChangeOnly, since fa635d730f
only set `ModuleLevelChanges` to trigger cloning of local metadata.
- CloneModule drops its unsound use of RF_ReuseAndMutateDistinctMDs
and special handling of !llvm.dbg.cu.
- Fixed some outdated header docs and left a couple of FIXMEs.
Differential Revision: https://reviews.llvm.org/D96531
Adds an *unaudited* SHA-256 implementation to `llvm/Support`. The ongoing lld-macho effort needs this to emit an adhoc code signature for macho files on macOS Big Sur.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D96540
Some of these accidentally disabled tests failed as a result; updated
tests per @qcolombet instructions. A small number needed additional
updates because legalization has actually changed since they were
written.
Found by the Rotten Green Tests project.
Differential Revision: https://reviews.llvm.org/D95257
The individual recipes have been updated to manage their operands using
VPUser a while back. Now that the transition is done, we can instead
make VPRecipeBase a VPUser and get rid of the toVPUser helper.
Rename the `RF_MoveDistinctMDs` flag passed into `MapValue` and
`MapMetadata` to `RF_ReuseAndMutateDistinctMDs` in order to more
precisely describe its effect and clarify the header documentation.
Found this while helping to investigate PR48841, which pointed out an
unsound use of the flag in `CloneModule()`. For now I've just added a
FIXME there, but I'm hopeful that the new (more precise) name will
prevent other similar errors.
This attempts to move all tools over to using `add_llvm_library` for
better consistency. After doing this, I noticed it ended up as nearly a
reimplementation of https://reviews.llvm.org/rL342148, which later got
reverted in r342336 (b09a8c9bd9).
With ccache and ninja on a large core machine (40), I haven't run into
build errors, so I'm hopeful it's better now, though it doesn't seem to
be any different / new.
Reviewed By: stephenneuendorffer
Differential Revision: https://reviews.llvm.org/D90970
We implement getHostCPUName() for AIX via systemcfg interfaces since access to the processor version register is a privileged operation. We return a value based on the current processor implementation mode.
This fixes the cpu detection used by clang for `-mcpu=native`.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D95966
Currently, the SmallPtrSet type allows inserting elements but it does
not support inserting elements with a positional hint. The lack of this
signature means that you cannot use SmallPtrSet with
std::insert_iterator or std::inserter(), which makes some code
constructs more awkward. This adds an overload of insert() that can be
used in these scenarios.
The positional hint is unused by SmallPtrSet and the call is equivalent
to calling insert() without a hint.
As mentioned in TODO comment, casting double to float causes NaNs to change bits.
To avoid the change, this patch adds support for single-floating-point immediate value on MachineCode.
Patch by Yuta Saito.
Differential Revision: https://reviews.llvm.org/D77384
The operator< in the previous attempt was incorrect. It is unfortunate
that this was only caught by the expensive checks.
This reverts commit ff1147c363.
As noted in https://reviews.llvm.org/D93459, the formatting of
multi-line descriptions of clEnumValN and the likes is unfavorable.
Thus this patch adds support for correctly indenting these.
Reviewed By: serge-sans-paille
Differential Revision: https://reviews.llvm.org/D93494
This change compresses the context string by removing cycles due to recursive function for CS profile generation. Removing recursion cycles is a way to normalize the calling context which will be better for the sample aggregation and also make the context promoting deterministic.
Specifically for implementation, we recognize adjacent repeated frames as cycles and deduplicated them through multiple round of iteration.
For example:
Considering a input context string stack:
[“a”, “a”, “b”, “c”, “a”, “b”, “c”, “b”, “c”, “d”]
For first iteration,, it removed all adjacent repeated frames of size 1:
[“a”, “b”, “c”, “a”, “b”, “c”, “b”, “c”, “d”]
For second iteration, it removed all adjacent repeated frames of size 2:
[“a”, “b”, “c”, “a”, “b”, “c”, “d”]
So in the end, we get compressed output:
[“a”, “b”, “c”, “d”]
Compression will be called in two place: one for sample's context key right after unwinding, one is for the eventual context string id in the ProfileGenerator.
Added a switch `compress-recursion` to control the size of duplicated frames, default -1 means no size limit.
Added unit tests and regression test for this.
Differential Revision: https://reviews.llvm.org/D93556
This change compresses the context string by removing cycles due to recursive function for CS profile generation. Removing recursion cycles is a way to normalize the calling context which will be better for the sample aggregation and also make the context promoting deterministic.
Specifically for implementation, we recognize adjacent repeated frames as cycles and deduplicated them through multiple round of iteration.
For example:
Considering a input context string stack:
[“a”, “a”, “b”, “c”, “a”, “b”, “c”, “b”, “c”, “d”]
For first iteration,, it removed all adjacent repeated frames of size 1:
[“a”, “b”, “c”, “a”, “b”, “c”, “b”, “c”, “d”]
For second iteration, it removed all adjacent repeated frames of size 2:
[“a”, “b”, “c”, “a”, “b”, “c”, “d”]
So in the end, we get compressed output:
[“a”, “b”, “c”, “d”]
Compression will be called in two place: one for sample's context key right after unwinding, one is for the eventual context string id in the ProfileGenerator.
Added a switch `compress-recursion` to control the size of duplicated frames, default -1 means no size limit.
Added unit tests and regression test for this.
Differential Revision: https://reviews.llvm.org/D93556
Matt Arsenault