Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264587
Spiritually reapply commit r264409 (reverted in r264410), albeit with a
bit of a redesign.
Firstly, avoid splitting the big blob into multiple chunks of strings.
r264409 imposed an arbitrary limit to avoid a massive allocation on the
shared 'Record' SmallVector. The bug with that commit only reproduced
when there were more than "chunk-size" strings. A test for this would
have been useless long-term, since we're liable to adjust the chunk-size
in the future.
Thus, eliminate the motivation for chunk-ing by storing the string sizes
in the blob. Here's the layout:
vbr6: # of strings
vbr6: offset-to-blob
blob:
[vbr6]: string lengths
[char]: concatenated strings
Secondly, make the output of llvm-bcanalyzer readable.
I noticed when debugging r264409 that llvm-bcanalyzer was outputting a
massive blob all in one line. Past a small number, the strings were
impossible to split in my head, and the lines were way too long. This
version adds support in llvm-bcanalyzer for pretty-printing.
<STRINGS abbrevid=4 op0=3 op1=9/> num-strings = 3 {
'abc'
'def'
'ghi'
}
From the original commit:
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
llvm-svn: 264551
Split helper out of EmitRecordWithAbbrevImpl called emitBlob to reduce
code duplication, and add a few tests for it.
No functionality change intended.
llvm-svn: 264550
The implementation is fairly obvious. This is preparation for using
some blobs in bitcode.
For clarity (and perhaps future-proofing?), I moved the call to
JumpToBit in BitstreamCursor::readRecord ahead of calling
MemoryObject::getPointer, since JumpToBit can theoretically (a) read
bytes, which (b) invalidates the blob pointer.
This isn't strictly necessary the two memory objects we have:
- The return of RawMemoryObject::getPointer is valid until the memory
object is destroyed.
- StreamingMemoryObject::getPointer is valid until the next chunk is
read from the stream. Since the JumpToBit call is only going ahead
to a word boundary, we'll never load another chunk.
However, reordering makes it clear by inspection that the blob returned
by BitstreamCursor::readRecord will be valid.
I added some tests for StreamingMemoryObject::getPointer and
BitstreamCursor::readRecord.
llvm-svn: 264549
Allow users of SimpleBitstreamCursor to limit the number of bytes
available to the cursor. This is preparation for instantiating a cursor
that isn't allowed to load more bytes from a StreamingMemoryObject (just
move around the ones already-loaded).
llvm-svn: 264547
Add API to SimpleBitstreamCursor to allow users to translate between
byte addresses and pointers.
- jumpToPointer: move the bit position to a particular pointer.
- getPointerToByte: get the pointer for a particular byte.
- getPointerToBit: get the pointer for the byte of the current bit.
- getCurrentByteNo: convenience function for assertions and tests.
Mainly adds unit tests (getPointerToBit/Byte already has a use), but
also preparation for eventually using jumpToPointer.
llvm-svn: 264546
Split out SimpleBitstreamCursor from BitstreamCursor, which is a
lower-level cursor with no knowledge of bitcode blocks, abbreviations,
or records. It just knows how to read bits and navigate the stream.
This is mainly organizational, to separate the API for manipulating raw
bits from that for bitcode concepts like Record and Block.
llvm-svn: 264545
This reverts commit c45f2afac5d6855a4804456a0f718563dc47ada0.
Looks like it may be causing a failure, I'll revert for now.
from
lib/CodeGen/AsmPrinter/DwarfDebug.cpp:14:
/usr/include/c++/4.9.2/bits/stl_pair.h: In instantiation of
'std::pair<_T1, _T2>& std::pair<_T1,
_T2>::operator=(const std::pair<_T1, _T2>&) [with _T1 =
std::unique_ptr<llvm::DwarfTypeUnit>; _T2 = const
llvm::DICompositeType*]':
/usr/include/c++/4.9.2/bits/stl_pair.h:160:8: error: use of deleted
function 'std::unique_ptr<_Tp, _Dp>& std::unique_ptr<_Tp,
_Dp>::operator=(const std::unique_ptr<_Tp, _Dp>&) [with _Tp =
llvm::DwarfTypeUnit; _Dp = std::default_delete<llvm::DwarfTypeUnit>]'
first = __p.first;
^
llvm-svn: 264544
I tried to use isPodLike in:
http://reviews.llvm.org/D18483
That failed because !is_class is too strict on platforms which don't yet
have is_trivially_copyable. This update tries to make isPodLike smarter
for platforms which don't have is_trivially_copyable, and AFAICT it
Should Just Work on all of them. I'll revert if the bots disagree with
me.
I'll also rename isPodLike to isTriviallyCopyable if this all works out,
since that's what the standard calls it now and one day we'll be rid of
isPodLike.
llvm-svn: 264541
Summary:
Now that the summary contains the full reference/call graph, we can
replace the existing function importer that loads and inspect the IR
to iteratively walk the call graph by a traversal based purely on the
summary information. Decouple the actual importing decision from any
IR manipulation.
Reviewers: tejohnson
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18343
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264503
preposterously large for some lookup tables -- in C++ classes generated by
template instantiation, it's very common for the number of lookup results to be
either 1 or 2.
This reduces size of a libstdc++ module by 7-15%.
llvm-svn: 264486
The implementation of SDLoc has an extra layer of indirection here for
no particular reason, and was leading to problems where we were
dereferencing pointers to SDNodes that had already been deleted so
that we could get at the DebugLoc for a new SDNode. This is one of the
errors that came up often in PR26808.
Instead, we can just track the DebugLoc and IROrder directly. This
makes the code both easier to understand and more correct. It's also
basically NFC other than fixing a large number of places where we were
reading the memory of deleted SDNodes.
llvm-svn: 264470
method instead.
This is not quite a named constructor: Construction may fail, and
MachOObjectFiles are usually passed by unique_ptr anyway, so create
returns an Expected<std::unique_ptr<MachOObjectFile>>.
llvm-svn: 264469
This helper method creates a pre-checked Error suitable for use as an out
parameter in a constructor. This avoids the need to have the constructor
check a known-good error before assigning to it.
llvm-svn: 264467
When merging stores in DAGCombiner, add check to ensure that no
dependenices exist that would cause the construction of a cycle in our
DAG. This may happen if one store has a data dependence on another
instruction (e.g. a load) which itself has a (chain) dependence on
another store being merged. These stores cannot be merged safely and
doing so results in a cycle that is discovered in LegalizeDAG.
This test is only done in cases where Antialias analysis is used (UseAA)
as non-AA store merge candidates will be merged logically after all
loads which have been checked to not alias.
Reviewers: ahatanak, spatel, niravd, arsenm, hfinkel, tstellarAMD, jyknight
Subscribers: llvm-commits, tberghammer, danalbert, srhines
Differential Revision: http://reviews.llvm.org/D18336
llvm-svn: 264461
This is a recommit of r264414 after fixing the buildbot failure caused by
incompatible use of std::vector.erase().
The original message:
Add erase() which returns an iterator pointing to the next element after the
erased one. This makes it possible to erase selected elements while iterating
over the SetVector :
while (I != E)
if (test(*I))
I = SetVector.erase(I);
else
++I;
Reviewers: qcolombet, mcrosier, MatzeB, dblaikie
Subscribers: dberlin, dblaikie, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18281
llvm-svn: 264450
Summary:
Add erase() which returns an iterator pointing to the next element after the
erased one. This makes it possible to erase selected elements while iterating
over the SetVector :
while (I != E)
if (test(*I))
I = SetVector.erase(I);
else
++I;
Reviewers: qcolombet, mcrosier, MatzeB, dblaikie
Subscribers: dberlin, dblaikie, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18281
llvm-svn: 264414
Optimize output of MDStrings in bitcode. This emits them in big blocks
(currently 1024) in a pair of records:
- BULK_STRING_SIZES: the sizes of the strings in the block, and
- BULK_STRING_DATA: a single blob, which is the concatenation of all
the strings.
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
I needed to add support for blobs to streaming input to get the test
suite passing.
- StreamingMemoryObject::getPointer reads ahead and returns the
address of the blob.
- To avoid a possible reallocation of StreamingMemoryObject::Bytes,
BitstreamCursor::readRecord needs to move the call to JumpToEnd
forward so that getPointer is the last bitstream operation.
llvm-svn: 264409
Differential Revision: http://reviews.llvm.org/D18456
This is a re-commit of r264387 and r264388 after fixing a typo.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264392
This reverts commit r264387.
Bots are broken in various ways, I need to take one commit at a time...
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264390
Summary:
Loading IR with debug info improves MDString::get() from 19ms to 10ms.
This is a rework of D16597 with adding an "emplace" method on the StringMap
to avoid requiring the MDString move ctor to be public.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17920
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264386
Summary:
StringMap ctor accepts an initialize size, but expect it to be
rounded to the next power of 2. The ctor can handle that directly
instead of expecting clients to round it. Also, since the map will
resize itself when 75% full, take this into account an initialize
a larger initial size to avoid any growth.
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18344
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264385
Summary:
Just running the loop in the unittests for a few more iterations
(till 48) exhibit that the condition on the limit was not handled
properly in r263522.
Rewrite the test to use a class to count move/copies that happens
when inserting into the map.
Also take the opportunity to refactor the logic to compute the
number of buckets required for a given number of entries in the map.
Use this when constructing a DenseMap with a desired size given to
the constructor (and add a tests for this).
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18345
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264384
Summary:
These are just helpers calling their static counter part to
simplify client code.
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18339
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264382
The motivation for MODULE_CODE_METADATA_VALUES was to enable an
-flto=thin scheme where:
1. First, one function is cherry-picked from a bitcode file.
2. Later, another function is cherry-picked.
3. Later, ...
4. Finally, the metadata needed by all the previous functions is
loaded.
This was abandoned in favour of:
1. Calculate the superset of functions needed from a Module.
2. Link all functions at once.
Delayed metadata reading no longer serves a purpose. It also adds
a few complication, since we can't count on metadata being properly
parsed when exiting the BitcodeReader. After discussing with Teresa, we
agreed to remove it.
The code that depended on this was removed/updated in r264326.
llvm-svn: 264378
Remove logic to upgrade !llvm.loop by changing the MDString tag
directly. This old logic would check (and change) arbitrary strings
that had nothing to do with loop metadata. Instead, check !llvm.loop
attachments directly, and change which strings get attached.
Rather than updating the assembly-based upgrade, drop it entirely. It
has been quite a while since we supported upgrading textual IR.
llvm-svn: 264373
This reserves an MDKind for !llvm.loop, which allows callers to avoid a
string-based lookup. I'm not sure why it was missing.
There should be no functionality change here, just a small compile-time
speedup.
llvm-svn: 264371
Summary:
Apparently, when compiling with gcc 5.3.2 for powerpc64, the order of
headers is such that it gets an error about std::atomic<> use in
ThreadPool.h, since this header is not included explicitly. See also:
https://llvm.org/bugs/show_bug.cgi?id=27058
Fix this by including <atomic>. Patch by Bryan Drewery.
Reviewers: chandlerc, joker.eph
Subscribers: bdrewery, llvm-commits
Differential Revision: http://reviews.llvm.org/D18460
llvm-svn: 264335
Summary:
Only adds support for "naked" calls to llvm.experimental.deoptimize.
Support for round-tripping through RewriteStatepointsForGC will come
as a separate patch (should be simpler than this one).
Reviewers: reames
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18429
llvm-svn: 264329
Given that StatepointLowering now uniques derived pointers before
putting them in the per-statepoint spill map, we may end up with missing
entries for derived pointers when we visit a gc.relocate on a pointer
that was de-duplicated away.
Fix this by keeping two maps, one mapping gc pointers to their
de-duplicated values, and one mapping a de-duplicated value to the slot
it is spilled in.
llvm-svn: 264320
Vedant Kumar