The pass works in two modes:
Mode 1: Just set attributes starting from kernels. This can work at
the very beginning of opt and llc pipeline, but cannot clone functions
because it must be a function pass.
Mode 2: Actually clone functions for new attributes. This can only work
after all function passes in the opt pipeline because it has to be a
module pass.
Differential Revision: https://reviews.llvm.org/D63208
llvm-svn: 363586
Summary:
See D60593 for further information.
This patch adds GWP-ASan support to the Scudo hardened allocator. It also
implements end-to-end integration tests using Scudo as the backing allocator.
The tests include crash handling for buffer over/underflow as well as
use-after-free detection.
Reviewers: vlad.tsyrklevich, cryptoad
Reviewed By: vlad.tsyrklevich, cryptoad
Subscribers: kubamracek, mgorny, #sanitizers, llvm-commits, morehouse
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D62929
llvm-svn: 363584
If a YMM/ZMM non-temporal store has less than natural alignment, split the vector - either they will be satisfactorily aligned or will continue to be split until they are XMMs - at which point the legalizer will scalarize it.
llvm-svn: 363582
When considering a loop containing nontemporal stores or loads for
vectorization, suppress the vectorization if the corresponding
vectorized store or load with the aligment of the original scaler
memory op is not supported with the nontemporal hint on the target.
This adds two new functions:
bool isLegalNTStore(Type *DataType, unsigned Alignment) const;
bool isLegalNTLoad(Type *DataType, unsigned Alignment) const;
to TTI, leaving the target independent default implementation as
returning true, but with overriding implementations for X86 that
check the legality based on available Subtarget features.
This fixes https://llvm.org/PR40759
Differential Revision: https://reviews.llvm.org/D61764
llvm-svn: 363581
A target intrinsic may be defined as possibly reading memory, but the
call site may have additional knowledge that it doesn't read
memory. The intrinsic lowering will expect the pessimistic assumption
of the intrinsic definition, so the chain should still be used.
I fixed the same bug in SelectionDAG in r287593.
llvm-svn: 363580
I keep using the wrong instruction when manually writing tests. This
really needs to check the number of operands, but I don't see an easy
way to do that right now.
llvm-svn: 363579
This change adds/improves MSVC visualizers for many Clang types, including array types, trailing return types in function, deduction guides, a fix for OpaquePtr, etc. It also replaces all of the view(deref) with the "na" formatter, which is a better built-in natvis technique for doing the same thing.
Differential Revision: https://reviews.llvm.org/D63039
llvm-svn: 363574
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
llvm-svn: 363573
FunctionAnalysisManagerModuleProxy started to be used by the
AlwaysInlinerPass in r363287 and therefore had to be registered in the
New PassManager.
Should fix the regression tests
Polly :: ScopInliner/invariant-load-func.ll
Polly :: ScopInliner/simple-inline-loop.ll
llvm-svn: 363572
This is currently only used for ymm->xmm splitting but we shouldn't hardcode the offsets/alignment.
This is necessary for an upcoming patch to split under-aligned non-temporal vector loads.
llvm-svn: 363570
Summary:
The Combined allocator hold together all the other components, and
provides a memory allocator interface based on various template
parameters. This will be in turn used by "wrappers" that will provide
the standard C and C++ memory allocation functions, but can be
used as is as well.
This doesn't depart significantly from the current Scudo implementation
except for a few details:
- Quarantine batches are now protected by a header a well;
- an Allocator instance has its own TSD registry, as opposed to a
static one for everybody;
- a function to iterate over busy chunks has been added, for Android
purposes;
This also adds the associated tests, and a few default configurations
for several platforms, that will likely be further tuned later on.
Reviewers: morehouse, hctim, eugenis, vitalybuka
Reviewed By: morehouse
Subscribers: srhines, mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D63231
llvm-svn: 363569
Summary:
Previously, we randomly pick one main file symbol in dynamic index, we
may loose the ideal symbol (with definition location) in the index.
It fixes the issue where sometimes we fail to go to the symbol definition, see:
1. call go-to-decl on Foo in Foo.cpp
2. jump to Foo.h, call go-to-def on Foo in Foo.h
we can't go back to Foo.cpp -- because we open Foo.cpp, Foo.h in clangd, both
files have Foo symbol (one with def&decl, one with decl only), we randomely
choose one.
Reviewers: kadircet
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D63425
llvm-svn: 363568
D55859 <https://reviews.llvm.org/D55859> has no effect for some of the
testcases so this patch extends it even for (all?) other testcases known to me.
LLDB was failing when LLDB prints errors reading system debug infos
(`*-debuginfo.rpm`, DWZ-optimized) which should never happen as LLDB testcases
should not be affected by system debug infos.
`lldb/packages/Python/lldbsuite/test/api/multithreaded/driver.cpp.template` is
using only SB API which does not expose `ModuleList` so I had to call
`HandleCommand()` there.
`lldb-test.cpp` could also use `HandleCommand` and then there would be no need
for `ModuleListProperties::SetEnableExternalLookup()` but I think it is cleaner
with API and not on based on text commands.
Differential Revision: https://reviews.llvm.org/D63339
llvm-svn: 363567
Summary:
There is PHINode::getBasicBlockIndex() and PHINode::setIncomingValue()
but no function to replace incoming value for a specified BasicBlock*
predecessor.
Clearly, there are a lot of places that could use that functionality.
Reviewer: craig.topper, lebedev.ri, Meinersbur, kbarton, fhahn
Reviewed By: Meinersbur, fhahn
Subscribers: fhahn, hiraditya, zzheng, jsji, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63338
llvm-svn: 363566
For loads, pre-SSE41 we can't perform NT loads at all, and after that we can only perform vector aligned loads, so if the alignment is less than for a xmm we'll just end up using the regular unaligned vector loads anyway.
First step towards fixing PR42026 - the next step for stores will be to use SSE4A movntsd where possible and to avoid the stack spill on SSE2 targets.
Differential Revision: https://reviews.llvm.org/D63246
llvm-svn: 363564
If an addrspacecast needed to be inserted again, this was creating a
clone of the original cast for each user. Just use the original, which
also saves losing the value name.
llvm-svn: 363562
Should also be marked writeonly, but I think that would require
splitting the version with done set to a separate intrinsic
Test change is only from renumbering the attribute group numbers,
which for some reason the generated check lines consider.
llvm-svn: 363560
The HardwareLoops pass finds exit blocks with a scevable exit count.
If the target specifies to update the loop counter in a register,
through a phi, we need to ensure that the exit block is a latch so
that we can insert the phi with the correct value for the incoming
edge.
Differential Revision: https://reviews.llvm.org/D63336
llvm-svn: 363556
Summary:
Extend our extension to support detecting these files as C++ files based on the first
line (`-*- C++ -*-`), it will make clangd work on C++ standard headers
(e.g. iostream).
We use the contributes.languages[1] to enrich the builtin VScode C++
support.
[1]: https://code.visualstudio.com/api/references/contribution-points#contributes.languages
Reviewers: kadircet
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D63397
llvm-svn: 363554
Summary:
- Revise the interface to derive the stub name and simplify the
assertion of it.
Reviewers: yaxunl, tra
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D63335
llvm-svn: 363553
The flag is useful when wanting to create .o files that are independent
from the absolute path to the build directory. -fdebug-prefix-map= can
be used to the same effect, but it requires putting the absolute path
to the build directory on the build command line, so it still requires
the build command line to be dependent on the absolute path of the build
directory. With this flag, "-fdebug-compilation-dir ." makes it so that
both debug info and the compile command itself are independent of the
absolute path of the build directory, which is good for build
determinism (in the sense that the build is independent of which
directory it happens in) and for caching compile results.
(The tradeoff is that the debugger needs explicit configuration to know
the build directory. See also http://dwarfstd.org/ShowIssue.php?issue=171130.2)
Differential Revision: https://reviews.llvm.org/D63387
llvm-svn: 363548
Summary:
Avoid that loop vectorizer creates loads/stores of vectors
with "irregular" types when interleaving. An example of
an irregular type is x86_fp80 that is 80 bits, but that
may have an allocation size that is 96 bits. So an array
of x86_fp80 is not bitcast compatible with a vector
of the same type.
Not sure if interleavedAccessCanBeWidened is the best
place for this check, but it solves the problem seen
in the added test case. And it is the same kind of check
that already exists in memoryInstructionCanBeWidened.
Reviewers: fhahn, Ayal, craig.topper
Reviewed By: fhahn
Subscribers: hiraditya, rkruppe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63386
llvm-svn: 363547
This patch tests the forward-referencing added in D62995 by changing
some existing intrinsics to use forward referencing of overloadable
parameters, rather than backward referencing.
This patch changes the TableGen definition/implementation of
llvm.aarch64.neon.ld2lane and llvm.aarch64.neon.ld2lane intrinsics
(and similar for ld3 and ld4). This change is intended to be
non-functional, since the behaviour of the intrinsics is
expected to be the same.
Reviewers: arsenm, dmgreen, RKSimon, greened, rnk
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D63189
llvm-svn: 363546
Summary:
The AArch64 version of the libunwind function which restores the
CPU state and resumes execution is not interrupt-safe. It restores
the target value of SP before loading the floating-point registers
from the context struct, but that struct is allocated on the stack
which is being deallocated. This means that if an interrupt occurs
during this function, and uses a lot of stack space, it could
overwrite the values about to be loaded into the floating-point
registers.
This patch fixes the issue.
Patch by Oliver Stannard.
Reviewers: phosek, chill
Reviewed By: chill
Subscribers: chill, javed.absar, kristof.beyls, christof, LukeCheeseman, pbarrio, olista01, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D63006
llvm-svn: 363545
Some GEPs were not being split, presumably because that split would just be
undone by the DAGCombiner. Not performing those splits can prevent important
optimizations, such as preventing the element indices / member offsets from
being (partially) folded into load/store instruction immediates. This patch:
- Makes the splits also occur in the cases where the base address and the GEP
are in the same BB.
- Ensures that the DAGCombiner doesn't reassociate them back again.
Differential Revision: https://reviews.llvm.org/D60294
llvm-svn: 363544
This is already done in DAGCombiner::visitINSERT_SUBVECTOR, but this helps a number of shuffles across different vector widths recognise when they come from the same source.
llvm-svn: 363542
Reland r363242 after fixing an issue with the tablegen dependence.
Patch by Pierre Gondois and Sven van Haastregt.
Differential revision: https://reviews.llvm.org/D62849
llvm-svn: 363541
Second functional change following on from rL362687. Pass the
NoWrapFlags from the MulExpr to InsertBinop when we're generating a
shl or mul.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363540
Matt Arsenault