For an out-of-range relocation referencing a non-local symbol, report the symbol name and the object file that defines the symbol. As an example:
```
t.o:(function func: .text.func+0x3): relocation R_X86_64_32S out of range: -281474974609120 is not in [-2147483648, 2147483647]
```
=>
```
t.o:(function func: .text.func+0x3): relocation R_X86_64_32S out of range: -281474974609120 is not in [-2147483648, 2147483647]; references func
>>> defined in t1.o
```
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D73518
D73474 disabled the generation of interworking thunks for branch
relocations to non STT_FUNC symbols. This patch handles the case of BL and
BLX instructions to non STT_FUNC symbols. LLD would normally look at the
state of the caller and the callee and write a BL if the states are the
same and a BLX if the states are different.
This patch disables BL/BLX substitution when the destination symbol does
not have type STT_FUNC. This brings our behavior in line with GNU ld which
may prevent difficult to diagnose runtime errors when switching to lld.
Differential Revision: https://reviews.llvm.org/D73542
Many of the debug line prologue errors are not inherently fatal. In most
cases, we can make reasonable assumptions and carry on. This patch does
exactly that. In the case of length problems, the approach of "assume
stated length is correct" is taken which means the offset might need
adjusting.
This is a relanding of b94191fe, fixing an LLD test and the LLDB build.
Reviewed by: dblaikie, labath
Differential Revision: https://reviews.llvm.org/D72158
Similar to R_MIPS_GPREL16 and R_MIPS_GPREL32 (D45972).
If the addend of an R_PPC_PLTREL24 is >= 0x8000, it indicates that r30
is relative to the input section .got2.
```
addis 30, 30, .got2+0x8000-.L1$pb@ha
addi 30, 30, .got2+0x8000-.L1$pb@l
...
bl foo+0x8000@PLT
```
After linking, the relocation will be relative to the output section .got2.
To compensate for the shift `address(input section .got2) - address(output section .got2) = ppc32Got2OutSecOff`, adjust by `ppc32Got2OutSecOff`:
```
addis 30, 30, .got2+0x8000-.L1+ppc32Got2OutSecOff$pb@ha
addi 30, 30, .got2+0x8000-.L1+ppc32Got2OutSecOff$pb@ha$pb@l
...
bl foo+0x8000+ppc32Got2OutSecOff@PLT
```
This rule applys to a relocatable link or a non-relocatable link with --emit-relocs.
Reviewed By: Bdragon28
Differential Revision: https://reviews.llvm.org/D73532
ELF for the ARM architecture requires linkers to provide
interworking for symbols that are of type STT_FUNC. Interworking for
other symbols must be encoded directly in the object file. LLD was always
providing interworking, regardless of the symbol type, this breaks some
programs that have branches from Thumb state targeting STT_NOTYPE symbols
that have bit 0 clear, but they are in fact internal labels in a Thumb
function. LLD treats these symbols as ARM and inserts a transition to Arm.
This fixes the problem for in range branches, R_ARM_JUMP24,
R_ARM_THM_JUMP24 and R_ARM_THM_JUMP19. This is expected to be the vast
majority of problem cases as branching to an internal label close to the
function.
There is at least one follow up patch required.
- R_ARM_CALL and R_ARM_THM_CALL may do interworking via BL/BLX
substitution.
In theory range-extension thunks can be altered to not change state when
the symbol type is not STT_FUNC. I will need to check with ld.bfd to see if
this is the case in practice.
Fixes (part of) https://github.com/ClangBuiltLinux/linux/issues/773
Differential Revision: https://reviews.llvm.org/D73474
This restores 59733525d3 (D71913), along
with bot fix 19c76989bb.
The bot failure should be fixed by D73418, committed as
af954e441a.
I also added a fix for non-x86 bot failures by requiring x86 in new test
lld/test/ELF/lto/devirt_vcall_vis_public.ll.
* Generalize the code added in D70637 and D70937. We should eventually remove the EM_MIPS special case.
* Handle R_PPC_LOCAL24PC the same way as R_PPC_REL24.
Reviewed By: Bdragon28
Differential Revision: https://reviews.llvm.org/D73424
-fno-pie produces a pair of non-GOT-non-PLT relocations R_PPC_ADDR16_{HA,LO} (R_ABS) referencing external
functions.
```
lis 3, func@ha
la 3, func@l(3)
```
In a -no-pie/-pie link, if func is not defined in the executable, a canonical PLT entry (st_value>0, st_shndx=0) will be needed.
References to func in shared objects will be resolved to this address.
-fno-pie -pie should fail with "can't create dynamic relocation ... against ...", so we just need to think about -no-pie.
On x86, the PLT entry passes the JMP_SLOT offset to the rtld PLT resolver.
On x86-64: the PLT entry passes the JUMP_SLOT index to the rtld PLT resolver.
On ARM/AArch64: the PLT entry passes &.got.plt[n]. The PLT header passes &.got.plt[fixed-index]. The rtld PLT resolver can compute the JUMP_SLOT index from the two addresses.
For these targets, the canonical PLT entry can just reuse the regular PLT entry (in PltSection).
On PPC32: PltSection (.glink) consists of `b PLTresolve` instructions and `PLTresolve`. The rtld PLT resolver depends on r11 having been set up to the .plt (GotPltSection) entry.
On PPC64 ELFv2: PltSection (.glink) consists of `__glink_PLTresolve` and `bl __glink_PLTresolve`. The rtld PLT resolver depends on r12 having been set up to the .plt (GotPltSection) entry.
We cannot reuse a `b PLTresolve`/`bl __glink_PLTresolve` in PltSection as a canonical PLT entry. PPC64 ELFv2 avoids the problem by using TOC for any external reference, even in non-pic code, so the canonical PLT entry scenario should not happen in the first place.
For PPC32, we have to create a PLT call stub as the canonical PLT entry. The code sequence sets up r11.
Reviewed By: Bdragon28
Differential Revision: https://reviews.llvm.org/D73399
Summary:
Third part in series to support Safe Whole Program Devirtualization
Enablement, see RFC here:
http://lists.llvm.org/pipermail/llvm-dev/2019-December/137543.html
This patch adds type test metadata under -fwhole-program-vtables,
even for classes without hidden visibility. It then changes WPD to skip
devirtualization for a virtual function call when any of the compatible
vtables has public vcall visibility.
Additionally, internal LLVM options as well as lld and gold-plugin
options are added which enable upgrading all public vcall visibility
to linkage unit (hidden) visibility during LTO. This enables the more
aggressive WPD to kick in based on LTO time knowledge of the visibility
guarantees.
Support was added to all flavors of LTO WPD (regular, hybrid and
index-only), and to both the new and old LTO APIs.
Unfortunately it was not simple to split the first and second parts of
this part of the change (the unconditional emission of type tests and
the upgrading of the vcall visiblity) as I needed a way to upgrade the
public visibility on legacy WPD llvm assembly tests that don't include
linkage unit vcall visibility specifiers, to avoid a lot of test churn.
I also added a mechanism to LowerTypeTests that allows dropping type
test assume sequences we now aggressively insert when we invoke
distributed ThinLTO backends with null indexes, which is used in testing
mode, and which doesn't invoke the normal ThinLTO backend pipeline.
Depends on D71907 and D71911.
Reviewers: pcc, evgeny777, steven_wu, espindola
Subscribers: emaste, Prazek, inglorion, arichardson, hiraditya, MaskRay, dexonsmith, dang, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71913
I felt really sad to push this commit for my selfish purpose to make
glibc -static-pie build with lld. Some code constructs in glibc require
R_X86_64_GOTPCREL/R_X86_64_REX_GOTPCRELX referencing undefined weak to
be resolved to a GOT entry not relocated by R_X86_64_GLOB_DAT (GNU ld
behavior), e.g.
csu/libc-start.c
if (__pthread_initialize_minimal != NULL)
__pthread_initialize_minimal ();
elf/dl-object.c
void
_dl_add_to_namespace_list (struct link_map *new, Lmid_t nsid)
{
/* We modify the list of loaded objects. */
__rtld_lock_lock_recursive (GL(dl_load_write_lock));
Emitting a GLOB_DAT will make the address equal &__ehdr_start (true
value) and cause elf/ldconfig to segfault. glibc really should move away
from weak references, which do not have defined semantics.
Temporarily special case --no-dynamic-linker.
Summary:
Linker scripts allow filenames to be put in double quotes to prevent
characters in filenames that are part of the linker script syntax from
having their special meaning. Case in point the * wildcard character.
Availability of double quoting filenames also allows to fix a failure in
ELF/linkerscript/filename-spec.s when the path contain a @ which the
lexer consider as a special characters and thus break up a filename
containing it. This may happens under Jenkins which createspath such as
pipeline@2.
To avoid the need for escaping GlobPattern metacharacters in filename
in double quotes, GlobPattern::create is augmented with a new parameter
to request literal matching instead of relying on the presence of a
wildcard character in the pattern.
Reviewers: jhenderson, MaskRay, evgeny777, espindola, alexshap
Reviewed By: MaskRay
Subscribers: peter.smith, grimar, ruiu, emaste, arichardson, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72517
The --fix-cortex-a8 is sensitive to alignment and the precise destination
of branch instructions. These are not knowable at relocatable link time. We
follow GNU ld and the --fix-cortex-a53-843419 (D72968) by not patching the
code when there is a relocatable link.
Differential Revision: https://reviews.llvm.org/D73100
The INPUT_SECTION_FLAGS linker script command is used to constrain the
section pattern matching to sections that match certain combinations of
flags.
There are two ways to express the constraint.
withFlags: Section must have these flags.
withoutFlags: Section must not have these flags.
The syntax of the command is:
INPUT_SECTION_FLAGS '(' sect_flag_list ')'
sect_flag_list: NAME
| sect_flag_list '&' NAME
Where NAME matches a section flag name such as SHF_EXECINSTR, or the
integer value of a section flag. If the first character of NAME is ! then
it means must not contain flag.
We do not support the rare case of { INPUT_SECTION_FLAGS(flags) filespec }
where filespec has no input section description like (.text).
As an example from the ld man page:
SECTIONS {
.text : { INPUT_SECTION_FLAGS (SHF_MERGE & SHF_STRINGS) *(.text) }
.text2 : { INPUT_SECTION_FLAGS (!SHF_WRITE) *(.text) }
}
.text will match sections called .text that have both the SHF_MERGE and
SHF_STRINGS flag.
.text2 will match sections called .text that don't have the SHF_WRITE flag.
The flag names accepted are the generic to all targets and SHF_ARM_PURECODE
as it is very useful to filter all the pure code sections into a single
program header that can be marked execute never.
fixes PR44265
Differential Revision: https://reviews.llvm.org/D72756
Summary:
Unlike R_RISCV_RELAX, which is a linker hint, R_RISCV_ALIGN requires the
support of the linker even when ignoring all R_RISCV_RELAX relocations.
This is because the compiler emits as many NOPs as may be required for
the requested alignment, more than may be required pre-relaxation, to
allow for the target becoming more unaligned after relaxing earlier
sequences. This means that the target is often not initially aligned in
the object files, and so the R_RISCV_ALIGN relocations cannot just be
ignored. Since we do not support linker relaxation, we must turn these
into errors.
Reviewers: ruiu, MaskRay, espindola
Reviewed By: MaskRay
Subscribers: grimar, Jim, emaste, arichardson, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71820
The code doesn't apply the fix correctly to relocatable links. I could
try to fix the code that applies the fix, but it's pointless: we don't
actually know what the offset will be in the final executable. So just
ignore the flag for relocatable links.
Issue discovered building Android.
Differential Revision: https://reviews.llvm.org/D72968
This essentially reverts b841e119d7.
Such code construct can be used in the following way:
// glibc/stdlib/exit.c
// clang -fuse-ld=lld => succeeded
// clang -fuse-ld=lld -fpie -pie => relocation R_PLT_PC cannot refer to absolute symbol
__attribute__((weak, visibility("hidden"))) extern void __call_tls_dtors();
void __run_exit_handlers() {
if (__call_tls_dtors)
__call_tls_dtors();
}
Since we allow R_PLT_PC in -no-pie mode, it makes sense to allow it in
-pie mode as well.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D72943
In D71281 a fix was put in to round up the size of a ThunkSection to the
nearest 4KiB when performing errata patching. This fixed a problem with a
very large instrumented program that had thunks and patches mutually
trigger each other. Unfortunately it triggers an assertion failure in an
AArch64 allyesconfig build of the kernel. There is a specific assertion
preventing an InputSectionDescription being larger than 4KiB. This will
always trigger if there is at least one Thunk needed in that
InputSectionDescription, which is possible for an allyesconfig build.
Abstractly the problem case is:
.text : {
*(.text) ;
...
. = ALIGN(SZ_4K);
__idmap_text_start = .;
*(.idmap.text)
__idmap_text_end = .;
...
}
The assertion checks that __idmap_text_end - __idmap_start is < 4 KiB.
Note that there is more than one InputSectionDescription in the
OutputSection so we can't just restrict the fix to OutputSections smaller
than 4 KiB.
The fix presented here limits the D71281 to InputSectionDescriptions that
meet the following conditions:
1.) The OutputSection is bigger than the thunkSectionSpacing so adding
thunks will affect the addresses of following code.
2.) The InputSectionDescription is larger than 4 KiB. This will prevent
any assertion failures that an InputSectionDescription is < 4 KiB
in size.
We do this at ThunkSection creation time as at this point we know that
the addresses are stable and up to date prior to adding the thunks as
assignAddresses() will have been called immediately prior to thunk
generation.
The fix reverts the two tests affected by D71281 to their original state
as they no longer need the 4KiB size roundup. I've added simpler tests to
check for D71281 when the OutputSection size is larger than the ThunkSection
spacing.
Fixes https://github.com/ClangBuiltLinux/linux/issues/812
Differential Revision: https://reviews.llvm.org/D72344
`{clang,gcc} -nostdlib -r a.c` passes --dynamic-linker to the linker,
and the expected behavior is to ignore it.
If .interp is kept in the relocatable object file, a final link will get
PT_INTERP even if --dynamic-linker is not specified. glibc ld.so expects
to see PT_DYNAMIC and the executable will likely fail to run.
Ignore --dynamic-linker in -r mode as well as -shared.
ThunkSection contains 4-byte instructions on all targets that use
thunks. Thunks should not be used in any performance sensitive places,
and locality/cache line/instruction fetching arguments should not apply.
We use 16 bytes as preferred function alignments for modern PowerPC cores.
In any case, 8 is not optimal.
Differential Revision: https://reviews.llvm.org/D72819
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
This assertion was added as part of D70659 but did not account for .bss
input sections. I noticed that this assert was incorrectly triggering
while building FreeBSD for MIPS64. Fixed by relaxing the assert to also
account for SHT_NOBITS input sections and adjust the test
mips-jalr-non-function.s to link a file with a .bss section first.
Reviewed By: MaskRay, grimar
Differential Revision: https://reviews.llvm.org/D72567
Suggested by Peter Collingbourne.
Non-VER_NDX_GLOBAL versions should not be assigned to defined symbols. --exclude-libs violates this and can cause a spurious error "cannot refer to absolute symbol" after D71795.
excludeLibs incorrectly assigns VER_NDX_LOCAL to an undefined weak symbol =>
isPreemptible is false =>
R_PLT_PC is optimized to R_PC =>
in isStaticLinkTimeConstant, an error is emitted.
Reviewed By: pcc, grimar
Differential Revision: https://reviews.llvm.org/D72681
This patch is a joint work by Rui Ueyama and me based on D58102 by Xiang Zhang.
It adds Intel CET (Control-flow Enforcement Technology) support to lld.
The implementation follows the draft version of psABI which you can
download from https://github.com/hjl-tools/x86-psABI/wiki/X86-psABI.
CET introduces a new restriction on indirect jump instructions so that
you can limit the places to which you can jump to using indirect jumps.
In order to use the feature, you need to compile source files with
-fcf-protection=full.
* IBT is enabled if all input files are compiled with the flag. To force enabling ibt, pass -z force-ibt.
* SHSTK is enabled if all input files are compiled with the flag, or if -z shstk is specified.
IBT-enabled executables/shared objects have two PLT sections, ".plt" and
".plt.sec". For the details as to why we have two sections, please read
the comments.
Reviewed By: xiangzhangllvm
Differential Revision: https://reviews.llvm.org/D59780
When compiling position-independent executables, we now use
DW_EH_PE_pcrel | DW_EH_PE_sdata4. However, the MIPS ABI does not define a
64-bit PC-relative ELF relocation so we cannot use sdata8 for the large
code model case. When using the large code model, we fall back to the
previous behaviour of generating absolute relocations.
With this change clang-generated .o files can be linked by LLD without
having to pass -Wl,-z,notext (which creates text relocations).
This is simpler than the approach used by ld.bfd, which rewrites the
.eh_frame section to convert absolute relocations into relative references.
I saw in D13104 that apparently ld.bfd did not accept pc-relative relocations
for MIPS ouput at some point. However, I also checked that recent ld.bfd
can process the clang-generated .o files so this no longer seems true.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72228
For a target symbol defined in the same section, currently we don't emit
a relocation if VariantKind is VK_None (with few exceptions like RISC-V
relaxation), while GNU as emits one. This causes program behavior
differences with and without -ffunction-sections, and can break intended
symbol interposition in a -shared link.
```
.globl foo
foo:
call foo # no relocation. On other targets, may be written as b foo, etc
call bar # a relocation if bar is in another section (e.g. -ffunction-sections)
call foo@plt # a relocation
```
Unify these cases by always emitting a relocation. If we ever want to
optimize `call foo` in -shared links, we should emit a STB_LOCAL alias
and call via the alias.
ARM/thumb2-beq-fixup.s: we now emit a relocation to global_thumb_fn as GNU as does.
X86/Inputs/align-branch-64-2.s: we now emit R_X86_64_PLT32 to foo as GNU does.
ELF/relax.s: rewrite the test as target-in-same-section.s .
We omitted relocations to `global` and now emit R_X86_64_PLT32.
Note, GNU as does not emit a relocation for `jmp global` (maybe its own
bug). Our new behavior is compatible except `jmp global`.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D72197
RELA targets don't read initial .got.plt entries.
REL targets (ARM, x86-32) write the address of the IFUNC resolver to the
entry (`write32le(buf, s.getVA())`).
The default writeIgotPlt() is not meaningful. Make it a no-op. AArch64
and x86-64 will have 0 as initial .got.plt entries associated with
IFUNC.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D72474
Unlike most of our errors in the debug line parser, the "no end of
sequence" message was missing any reference to which line table it
refererred to. This change adds the offset to this message.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72443
down to pass builder in ltobackend.
Currently CodeGenOpts like UnrollLoops/VectorizeLoop/VectorizeSLP in clang
are not passed down to pass builder in ltobackend when new pass manager is
used. This is inconsistent with the behavior when new pass manager is used
and thinlto is not used. Such inconsistency causes slp vectorization pass
not being enabled in ltobackend for O3 + thinlto right now. This patch
fixes that.
Differential Revision: https://reviews.llvm.org/D72386
An undefined weak does not fetch the lazy definition. A lazy weak symbol
should be considered undefined, and thus preemptible if .dynsym exists.
D71795 is not quite an NFC. It errors on an R_X86_64_PLT32 referencing
an undefined weak symbol. isPreemptible is false (incorrect) => R_PLT_PC
is optimized to R_PC => in isStaticLinkTimeConstant, an error is emitted
when an R_PC is applied on an undefined weak (considered absolute).
D59275 added the following clause to Symbol::includeInDynsym()
if (isUndefWeak() && Config->Pie && SharedFiles.empty())
return false;
D59549 explored the possibility to generalize it for -no-pie.
GNU ld's rules are architecture dependent and partly controlled by -z
{,no-}dynamic-undefined-weak. Our attempts to mimic its rules are
actually half-baked and don't provide perceivable benefits (it can save
a few more weak undefined symbols in .dynsym in a -static-pie
executable). Let's just delete the rule for simplicity. We will expect
cosmetic inconsistencies with ld.bfd in certain -static-pie scenarios.
This permits a simplification in D71795.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D71794
In AArch64 a branch to an undefined weak symbol that does not have a PLT
entry should resolve to the next instruction. The thunk generation code
can prevent this from happening as a range extension thunk can be generated
if the branch is sufficiently far away from 0, the value of an undefined
weak symbol.
The fix is taken from the Arm implementation of needsThunk(), we prevent a
thunk from being generated to an undefined weak symbol.
fixes pr44451
Differential Revision: https://reviews.llvm.org/D72267
LLD warns if it encounters malformed debug data when parsing line
information for an undefined reference. We only want to warn once.
This patch adds additional checking to make sure the warnings are
printed only once, both for variables within the same program and
variables in later line programs.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D71759
GCC before r245813 (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79439)
did not emit nop after b/bl. This can happen with recursive calls.
r245813 was back ported to GCC 5.5 and GCC 6.4.
This is common, for example, libstdc++.a(locale.o) shipped with GCC 4.9
and many objects in netlib lapack can cause lld to error. gold allows
such calls to the same section. Our __plt_foo symbol's `section` field
is used for ThunkSection, so we can't implement a similar loosen rule
easily. But we can make use of its `file` field which is currently NULL.
Differential Revision: https://reviews.llvm.org/D71639
Similar to D71509 (EM_PPC64), on EM_PPC, the IPLT code sequence should
be similar to a PLT call stub. Unlike EM_PPC64, EM_PPC -msecure-plt has
small/large PIC model differences.
* -fpic/-fpie: R_PPC_PLTREL24 r_addend=0. The call stub loads an address relative to `_GLOBAL_OFFSET_TABLE_`.
* -fPIC/-fPIE: R_PPC_PLTREL24 r_addend=0x8000. (A partial linked object
file may have an addend larger than 0x8000.) The call stub loads an address relative to .got2+0x8000.
Just assume large PIC model for now. This patch makes:
// clang -fuse-ld=lld -msecure-plt -fno-pie -no-pie a.c
// clang -fuse-ld=lld -msecure-plt -fPIE -pie a.c
#include <stdio.h>
static void impl(void) { puts("meow"); }
void thefunc(void) __attribute__((ifunc("resolver")));
void *resolver(void) { return &impl; }
int main(void) {
thefunc();
void (*theptr)(void) = &thefunc;
theptr();
}
work on Linux glibc. -fpie will crash because the compiler and the
linker do not agree on the value which r30 stores (_GLOBAL_OFFSET_TABLE_
vs .got2+0x8000).
Differential Revision: https://reviews.llvm.org/D71621
Non-preemptible IFUNC are placed in in.iplt (.glink on EM_PPC64). If
there is a non-GOT non-PLT relocation, for pointer equality, we change
the type of the symbol from STT_IFUNC and STT_FUNC and bind it to the
.glink entry.
On EM_386, EM_X86_64, EM_ARM, and EM_AARCH64, the PLT code sequence
loads the address from its associated .got.plt slot. An IPLT also has an
associated .got.plt slot and can use the same code sequence.
On EM_PPC64, the PLT code sequence is actually a bl instruction in
.glink . It jumps to `__glink_PLTresolve` (the PLT header). and
`__glink_PLTresolve` computes the .plt slot (relocated by
R_PPC64_JUMP_SLOT).
An IPLT does not have an associated R_PPC64_JUMP_SLOT, so we cannot use
`bl` in .iplt . Instead, create a call stub which has a similar code
sequence as PPC64PltCallStub. We don't save the TOC pointer, so such
scenarios will not work: a function pointer to a non-preemptible ifunc,
which resolves to a function defined in another DSO. This is the
restriction described by https://sourceware.org/glibc/wiki/GNU_IFUNC
(though on many architectures it works in practice):
Requirement (a): Resolver must be defined in the same translation unit as the implementations.
If an ifunc is taken address but not called, technically we don't need
an entry for it, but we currently do that.
This patch makes
// clang -fuse-ld=lld -fno-pie -no-pie a.c
// clang -fuse-ld=lld -fPIE -pie a.c
#include <stdio.h>
static void impl(void) { puts("meow"); }
void thefunc(void) __attribute__((ifunc("resolver")));
void *resolver(void) { return &impl; }
int main(void) {
thefunc();
void (*theptr)(void) = &thefunc;
theptr();
}
work on Linux glibc and FreeBSD. Calling a function pointer pointing to
a Non-preemptible IFUNC never worked before.
Differential Revision: https://reviews.llvm.org/D71509
This restores commit 1417558e4a and its follow-up, reverted by commit c3dbd782f1.
After this commit:
clang -fuse-ld=bfd -no-pie -nostdlib a.c => .interp not created
clang -fuse-ld=bfd -pie -fPIE -nostdlib a.c => .interp created
clang -fuse-ld=gold -no-pie -nostdlib a.c => .interp not created
clang -fuse-ld=gold -pie -fPIE -nostdlib a.c => .interp created
clang -fuse-ld=lld -no-pie -nostdlib a.c => .interp created
clang -fuse-ld=lld -pie -fPIE -nostdlib a.c => .interp created
This reverts commit 1417558e4a.
Also reverts commit 019a92bb28.
This causes check-sanitizer to fail. The "-Nolib" variant of the test
crashes on startup in the loader.
Similar to rL362355, but with the `!config->shared` guard.
(1) {gcc,clang} -fuse-ld=bfd -pie -fPIE -nostdlib a.c => .interp created
(2) {gcc,clang} -fuse-ld=lld -pie -fPIE -nostdlib a.c => .interp not created
(3) {gcc,clang} -fuse-ld=lld -pie -fPIE -nostdlib a.c a.so => .interp created
The inconsistency of (2) is due to the condition `!Config->SharedFiles.empty()`.
To make lld behave more like ld.bfd, we could change the condition to:
config->hasDynSymTab && !config->dynamicLinker.empty() && script->needsInterpSection();
However, that would bring another inconsistency as can be observed with:
(4) {gcc,clang} -fuse-ld=bfd -no-pie -nostdlib a.c => .interp not created
Linux powerpc discards `*(.gnu.version*)` (arch/powerpc/kernel/vmlinux.lds.S)
to suppress --orphan-handling=warn warnings in the -pie output `.tmp_vmlinux1`
The support is simple. Just add isLive() to:
1) Fix an assertion in SectionBase::getPartition() called by VersionTableSection::isNeeded().
2) Suppress DT_VERSYM, DT_VERDEF, DT_VERNEED and DT_VERNEEDNUM, if the relevant section is discarded.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D71819
For undef-not-suggest.test, we currently make redundant alternative
spelling suggestions:
```
ld.lld: error: relocation refers to a discarded section: .text.foo
>>> defined in a.o
>>> section group signature: foo
>>> prevailing definition is in a.o
>>> referenced by a.o:(.rodata+0x0)
>>> did you mean:
>>> defined in: a.o
ld.lld: error: relocation refers to a symbol in a discarded section: foo
>>> defined in a.o
>>> section group signature: foo
>>> prevailing definition is in a.o
>>> referenced by a.o:(.rodata+0x8)
>>> did you mean: for
>>> defined in: a.o
```
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71735
Summary:
If none of the input files are ELF object files (for example, when
generating an object file from a single binary input file via
"-b binary"), use a fallback value for the ELF header flags instead
of crashing with an assertion failure.
Reviewers: MaskRay, ruiu, espindola
Reviewed By: MaskRay, ruiu
Subscribers: kevans, grimar, emaste, arichardson, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits, jrtc27
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71101
GNU ld creates the synthetic section .iplt, and has a built-in linker
script that assigns .iplt to the output section .plt . There is no
output section named .iplt .
Making .iplt an output section actually has a benefit that makes the
tricky toolchain feature stand out. Symbolizers don't have to deal with
mixed PLT entries (e.g. llvm-objdump -d incorrectly annotates such jump
targets).
On EM_PPC{,64}, .glink contains a PLT resolver and a series of jump
instructions. The 4-byte entry size makes it unnecessary to have an
alignment of 16.
Mark ppc32-gnu-ifunc.s and ppc32-gnu-ifunc-nonpreemptable.s as `XFAIL: *`.
They test IPLT on EM_PPC, which never works.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D71520
PltSection is used by both PLT and IPLT. The PLT section may have a
header while the IPLT section does not. Split off IpltSection from
PltSection to be clearer.
Unlike other targets, PPC64 cannot use the same code sequence for PLT
and IPLT. This helps make a future PPC64 patch (D71509) more isolated.
On EM_386 and EM_X86_64, when PLT is empty while IPLT is not, currently
we are inconsistent whether the PLT header is conceptually attached to
in.plt or in.iplt . Consistently attach the header to in.plt can make
the -z retpolineplt logic simpler. It also makes `jmp` point to an
aesthetically better place for non-retpolineplt cases.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71519
This change only affects EM_386. relOff can be computed from `index`
easily, so it is unnecessarily passed as a parameter.
Both in.plt and in.iplt entries are written by writePLT. For in.iplt,
the instruction `push reloc_offset` will change because `index` is now
different. Fortunately, this does not matter because `push; jmp` is only
used by PLT. IPLT does not need the code sequence.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71518
This reverts commit 2bbd32f5e8, it was
causing UBSan failures like the following:
lld/ELF/Target.cpp:103:41: runtime error: applying non-zero offset 24 to null pointer
When a common symbol is merged with a shared symbol, increase st_size if
the shared symbol has a larger st_size. At runtime, the executable's
symbol overrides the shared symbol. The shared symbol may be created
from common symbols in a previous link. This rule makes sure we pick
the largest size among all common symbols.
This behavior matches GNU ld. See
https://sourceware.org/bugzilla/show_bug.cgi?id=25236 for discussions.
A shared symbol does not hold alignment constraints. Ignore the
alignment update.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D71161
Summary:
So far it seems like the only test affected by this change is the one I
recently added for R_MIPS_JALR relocations since the other test cases that
use this function early (unknown-relocation-*) do not have a valid input
section for the relocation offset.
Reviewers: ruiu, grimar, MaskRay, espindola
Reviewed By: ruiu, MaskRay
Subscribers: emaste, sdardis, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70659
On some edge cases such as Chromium compiled with full instrumentation we
have a .text section over twice the size of the maximum branch range and
the instrumented code generation containing many examples of the erratum
sequence. The combination of Thunks and many erratum sequences causes
finalizeAddressDependentContent() to not converge. We end up with:
start
- Thunk Creation (disturbs addresses after thunks, creating more patches)
- Patch Creation (disturbs addresses after patches, creating more thunks)
- goto start
In most images with few thunks and patches the mutual disturbance does not
cause convergence problems. As the .text size and number of patches go up
the risk increases.
A way to prevent the thunk creation from interfering with patch creation is
to round up the size of the thunks to a 4KiB boundary when the
erratum patch is enabled. As the erratum sequence only triggers when an
instruction sequence starts at 0xff8 or 0xffc modulo (4 KiB) by making the
thunks not affect addresses modulo (4 KiB) we prevent thunks from
interfering with the patch.
The patches themselves could be aggregated in the same way that Thunks are
within ThunkSections and we could round up the size in the same way. This
would reduce the number of patches created in a .text section size >
128 MiB but would not likely help convergence problems.
Differential Revision: https://reviews.llvm.org/D71281
fixes (remaining part of) pr44071, other part in D71242
The code to insert patch section merges them with a comparison function that
uses logic of the form:
return (isa<PatchSection>(a) && !isa<PatchSection>(b));
If the PatchSections don't implement classof this check fails if b is also
a SyntheticSection. This can result in the patches being out of range if
the SyntheticSection is big, for example a ThunkSection with lots of thunks.
Differential Revision: https://reviews.llvm.org/D71242
fixes (part of) pr44071
clang/gcc -fdebug-type-sections places .debug_types and
.rela.debug_types in a section group, with a signature symbol which
represents the type signature. The section group is for deduplication
purposes.
After D70146, we will discard such section groups. Refine the rule so
that we will retain the group if no member has the SHF_ALLOC flag.
GNU ld has a similar rule to retain the group if all members have the
SEC_DEBUGGING flag. We try to be more general for future-proof purposes:
if other non-SHF_ALLOC sections have deduplication needs, they may be
placed in a section group. Don't discard them.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D71157
Fixes PPC64 part of PR40438
// clang -target ppc64le -c a.cc
// .text.unlikely may be placed in a separate output section (via -z keep-text-section-prefix)
// The distance between bar in .text.unlikely and foo in .text may be larger than 32MiB.
static void foo() {}
__attribute__((section(".text.unlikely"))) static int bar() { foo(); return 0; }
__attribute__((used)) static int dummy = bar();
This patch makes such thunks with addends work for PPC64.
AArch64: .text -> `__AArch64ADRPThunk_ (adrp x16, ...; add x16, x16, ...; br x16)` -> target
PPC64: .text -> `__long_branch_ (addis 12, 2, ...; ld 12, ...(12); mtctr 12; bctr)` -> target
AArch64 can leverage ADRP to jump to the target directly, but PPC64
needs to load an address from .branch_lt . Before Power ISA v3.0, the
PC-relative ADDPCIS was not available. .branch_lt was invented to work
around the limitation.
Symbol::ppc64BranchltIndex is replaced by
PPC64LongBranchTargetSection::entry_index which take addends into
consideration.
The tests are rewritten: ppc64-long-branch.s tests -no-pie and
ppc64-long-branch-pi.s tests -pie and -shared.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D70937
The .note.gnu.property SHT_NOTE sections on AArch64 (a 64-bit target)
should have alignment 8 to more closely match the binutils implementation
where alignment is 4-bytes on 32-bit machines and 8-bytes on 64-bit
machines.
Previously LLD was using 4 for both 32-bit and 64-bit machines.
Differential Revision: https://reviews.llvm.org/D70962
The PT_GNU_PROPERTY program header describes the location of the
.note.gnu.property SHT_NOTES section. The linux kernel uses this program
header to find the .note.gnu.property section rather than parsing.
Executables that have properties that the kernel needs to act on that don't
have the PT_GNU_PROPERTY program header will not boot.
Differential Revision: https://reviews.llvm.org/D70961
Fixes AArch64 part of PR40438
The current range extension thunk framework does not handle a relocation
relative to a STT_SECTION symbol with a non-zero addend, which may be
used by jumps/calls to local functions on some RELA targets (AArch64,
powerpc ELFv1, powerpc64 ELFv2, etc). See PR40438 and the following
code for examples:
// clang -target $target a.cc
// .text.cold may be placed in a separate output section.
// The distance between bar in .text.cold and foo in .text may be larger than 128MiB.
static void foo() {}
__attribute__((section(".text.cold"))) static int bar() { foo(); return
0; }
__attribute__((used)) static int dummy = bar();
This patch makes such thunks with addends work for AArch64. The target
independent part can be reused by PPC in the future.
On REL targets (ARM, MIPS), jumps/calls are not represented as
STT_SECTION + non-zero addend (see
MCELFObjectTargetWriter::needsRelocateWithSymbol), so they don't need
this feature, but we need to make sure this patch does not affect them.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D70637
This is a follow-up discussed in D70495 thread.
The current logic is unusual for llvm-readobj. It doesn't print predecessors
list when it is empty. This is not good for machine parsers.
D70495 had to add this condition during refactoring to reduce amount of changes,
in tests, because the original code also had a similar logic.
Now seems it is time to get rid of it. This patch does it.
Differential revision: https://reviews.llvm.org/D70717
The previous data had the same length with compression levels 1 and 6
for zlib 1.2.8. Adjust the test to work for this library version. I've
also tested this with zlib 1.2.7 and zlib 1.2.11.
Currently LLD always use zlib compression level 6.
This patch changes it to use 1 for -O0, -O1 and 6 for -O2.
It fixes https://bugs.llvm.org/show_bug.cgi?id=44089.
There was also a thread in llvm-dev on this topic:
https://lists.llvm.org/pipermail/llvm-dev/2018-August/125020.html
Here is a table with results of building clang mentioned there:
```
Level Time Size
0 0m17.128s 2045081496 Z_NO_COMPRESSION
1 0m31.471s 922618584 Z_BEST_SPEED
2 0m32.659s 903642376
3 0m36.749s 890805856
4 0m41.532s 876697184
5 0m48.383s 862778576
6 1m3.176s 855251640 Z_DEFAULT_COMPRESSION
7 1m15.335s 853755920
8 2m0.561s 852497560
9 2m33.972s 852397408 Z_BEST_COMPRESSION
```
It shows that it is probably not reasonable to use values greater than 6.
Differential revision: https://reviews.llvm.org/D70658
In GNU ld, -Ttext sets the address of the .text section and -Ttext-segment sets the address of the text segment (RX).
gold only supports the -Ttext-segment semantic and treats -Ttext as an alias for -Ttext-segment.
lld only supports the -Ttext semantic and treats -Ttext-segment as an
alias for -Ttext. The text segment will be assigned to an address less
than the specified -Ttext-segment value.
This patch drops the -Ttext-segment alias.
The text segment is traditionally the first segment. Users who specify
-Ttext-segment may actually want to specify --image-base, the lld way to
express this. Unfortunately currently this is supported by GNU ld's
COFF port but not by its ELF port. gold does not support this option.
With -z separate-code, the behavior of GNU ld -Ttext-segment is weird (see https://sourceware.org/bugzilla/show_bug.cgi?id=25207)
rL289827 introduced the alias for linking qemu's non-pie user mode
binaries. As explained previously, this actually assigns the text
segment to an address less than 0x60000000. I feel that a better fix is
on the qemu side:
https://lists.nongnu.org/archive/html/qemu-devel/2019-11/msg02480.html
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D70468
Summary:
Current versions of clang would erroneously emit this relocation not only
against functions (loaded from the GOT) but also against data symbols
(e.g. a table of function pointers). LLD was then changing this into a
branch-and-link instruction, causing the program to jump to the data
symbol at run time. I discovered this problem when attempting to boot
MIPS64 FreeBSD after updating the to the latest upstream master.
Reviewers: atanasyan, jrtc27, espindola
Reviewed By: atanasyan
Subscribers: emaste, sdardis, krytarowski, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70406
Our elf-versioninfo.test is not perfect. It does not properly test how
flags are dumped and also we have a bug: they are dumped as enums in
LLVM style now, i.e not dumped properly.
GNU style uses a `versionFlagToString` method to build a string from flags
which seems is consistent with GNU readelf.
In this patch I fixed the issues mentioned.
Differential revision: https://reviews.llvm.org/D70399
Based on D70020 by serge-sans-paille.
The ELF spec says:
> Furthermore, there may be internal references among these sections that would not make sense if one of the sections were removed or replaced by a duplicate from another object. Therefore, such groups must be included or omitted from the linked object as a unit. A section cannot be a member of more than one group.
GNU ld has 2 behaviors that we don't have:
- Group members (nextInSectionGroup != nullptr) are subject to garbage collection.
This includes non-SHF_ALLOC SHT_NOTE sections.
In particular, discarding non-SHF_ALLOC SHT_NOTE sections is an expected behavior by the Annobin
project. See
https://developers.redhat.com/blog/2018/02/20/annobin-storing-information-binaries/
for more information.
- Groups members are retained or discarded as a unit.
Members may have internal references that are not expressed as
SHF_LINK_ORDER, relocations, etc. It seems that we should be more conservative here:
if a section is marked live, mark all the other member within the
group.
Both behaviors are reasonable. This patch implements them.
A new field InputSectionBase::nextInSectionGroup tracks the next member
within a group. on ELF64, this increases sizeof(InputSectionBase) froms
144 to 152.
InputSectionBase::dependentSections tracks section dependencies, which
is used by both --gc-sections and /DISCARD/. We can't overload it for
the "next member" semantic, because we should allow /DISCARD/ to discard
sections independent of --gc-sections (GNU ld behavior). This behavior
may be reasonably used by `/DISCARD/ : { *(.ARM.exidx*) }` or `/DISCARD/
: { *(.note*) }` (new test `linkerscript/discard-group.s`).
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D70146
Recommit r373168, which was reverted by r373242. This actually exposed a
boringssl bug which has been fixed for more than one month.
For the following two cases, we currently suppress the symbols. This
patch emits them (compatible with GNU as).
* `test2_a = undef`: if `undef` is otherwise unused.
* `.hidden hidden`: if `hidden` is unused. This is the main point of the
patch, because omitting the symbol would cause a linker semantic
difference.
It causes a behavior change that is not compatible with GNU as:
.weakref foo1, bar1
When neither foo1 nor bar1 is used, we now emit bar1, which is arguably
more consistent.
Another change is that we will emit .TOC. for .TOC.@tocbase . For this
directive, suppressing .TOC. can be seen as a size optimization, but we
choose to drop it for simplicity and consistency.
The definition may be mangled while an undefined reference is not.
This may come up when (1) the reference is from a C file or (2) the definition
misses an extern "C".
(2) is more common. Suggest an arbitrary mangled name that matches the
undefined reference, if such a definition exists.
ld.lld: error: undefined symbol: foo
>>> referenced by a.o:(.text+0x1)
>>> did you mean to declare foo(int) as extern "C"?
>>> defined in: a1.o
Reviewed By: dblaikie, ruiu
Differential Revision: https://reviews.llvm.org/D69650
When missing an extern "C" declaration, an undefined reference may be
mangled while the definition is not. Suggest the missing
extern "C" and the base name.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D69592
The logic added in r372781 caused ARMExidxSyntheticSection::addSection()
to return false for exidx sections without a link order dep that passed
isValidExidxSectionDep(). This included exidx sections for empty functions. As
a result, such exidx sections would end up treated like ordinary sections and
would end up being laid out before the ARMExidxSyntheticSection, most likely in
the wrong order relative to the exidx entries in the ARMExidxSyntheticSection,
breaking the orderedness invariant relied upon by unwinders. Fix this by
simply discarding such sections.
Differential Revision: https://reviews.llvm.org/D69744
Test files in the same directory share the same %T. %T is easy to
misuse and cause race conditions (when running concurrently) so it has
been deprecated since D48842 (see docs/CommandGuide/lit.rst).
While here, add `rm -rf %t.dir` so that tests cannot depend on old files lying around.
Reviewed By: jhenderson, ruiu
Differential Revision: https://reviews.llvm.org/D69572
Summary:
Add a flag `F_no_mmap` to `FileOutputBuffer` to support
`--[no-]mmap-output-file` in ELF LLD. LLD currently explicitly ignores
this flag for compatibility with GNU ld and gold.
We need this flag to speed up link time for large binaries in certain
scenarios. When we link some of our larger binaries we find that LLD
takes 50+ GB of memory, which causes memory pressure. The memory
pressure causes the VM to flush dirty pages of the output file to disk.
This is normally okay, since we should be flushing cold pages. However,
when using BtrFS with compression we need to write 128KB at a time when
we flush a page. If any page in that 128KB block is written again, then
it must be flushed a second time, and so on. Since LLD doesn't write
sequentially this causes write amplification. The same 128KB block will
end up being flushed multiple times, causing the linker to many times
more IO than necessary. We've observed 3-5x faster builds with
-no-mmap-output-file when we hit this scenario.
The bad scenario only applies to compressed filesystems, which group
together multiple pages into a single compressed block. I've tested
BtrFS, but the problem will be present for any compressed filesystem
on Linux, since it is caused by the VM.
Silently ignoring --no-mmap-output-file caused a silent regression when
we switched from gold to lld. We pass --no-mmap-output-file to fix this
edge case, but since lld silently ignored the flag we didn't realize it
wasn't being respected.
Benchmark building a 9 GB binary that exposes this edge case. I linked 3
times with --mmap-output-file and 3 times with --no-mmap-output-file and
took the average. The machine has 24 cores @ 2.4 GHz, 112 GB of RAM,
BtrFS mounted with -compress-force=zstd, and an 80% full disk.
| Mode | Time |
|---------|-------|
| mmap | 894 s |
| no mmap | 126 s |
When compression is disabled, BtrFS performs just as well with and
without mmap on this benchmark.
I was unable to reproduce the regression with any binaries in
lld-speed-test.
Reviewed By: ruiu, MaskRay
Differential Revision: https://reviews.llvm.org/D69294
Add a new '-z nognustack' option that suppresses emitting PT_GNU_STACK
segment. This segment is not supported at all on NetBSD (stack is
always non-executable), and the option is meant to be used to disable
emitting it.
Differential Revision: https://reviews.llvm.org/D56554
sections, but the current code misses certain variants. In particular, those
named when clang takes the code path in
clang/lib/Driver/ToolChain.cpp:416, where crtfiles are named:
clang_rt.<component>-<arch>-<env>.<suffix>
Previously, the code only handled:
clang_rt.<component>.<suffix>
<component>.<suffix>
This revision fixes that.
Fix PR43767
In -r mode, when processing a SHT_REL[A] that relocates a SHF_MERGE, sec->getRelocatedSection() is a
MergeInputSection and its parent is an OutputSection but is asserted to
be a SyntheticSection (MergeSyntheticSection) in LinkerScript.cpp:addInputSec().
##
The code path is not exercised in non -r mode because the relocated
section changed from MergeInputSection to InputSection.
Reorder the code to make the non -r logic apply to -r as well, thus fix
the crash.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D69364
This updates some more places using `%T` to use `%/T` for path normalization.
If this does not work, this and r375126 should be reverted together.
llvm-svn: 375131
Summary:
Glob support was improved to accept `\` as an escape character in r375051, but reverted as r375052 due to a failure in this test on Windows.
The reason this failure seems Windows specific is because the path separator `\` is currently being relied on to be interpreted literally instead of as an escape character. Per documentation on linker input section wildcard patterns, this seems to be a bug in lld accepting `\` as a literal instead of an escape character.
For example:
```
SECTIONS{ .foo :{ /path/to/foo.o(.foo) }} # OK: standard UNIX path
SECTIONS{ .foo :{ C:/path/to/foo.o(.foo) }} # OK: windows accepts slashes in either direction
SECTIONS{ .foo :{ C:\\path\\to\\foo.o(.foo) }} # OK: escape character used to match a literal \
SECTIONS{ .foo :{ C:\path\to\foo.o(.foo) }} # BAD: this actually matches the path C:pathtofoo.o(.foo)
```
This avoids the problem in the test by using `%/T` in place of `%T` to normalize the path separator to `/`, which windows should also accept.
This patch just fixes the test, and glob support will be be relanded separately.
For a sample buildbot error, see: http://lab.llvm.org:8011/builders/clang-x64-windows-msvc/builds/11578/steps/stage%201%20check/logs/stdio
Reviewers: evgeny777, ruiu, MaskRay, espindola
Reviewed By: ruiu, MaskRay
Subscribers: emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69074
llvm-svn: 375126
Summary:
- Expand the "Name" column past 13 characters when any of the section names are longer. Current behavior is a staggard output instead of a nice table if a single name is longer.
- Only print the required number of hex chars for addresses (i.e. 8 characters for 32-bit, 16 characters for 64-bit)
- Fix trailing spaces
Reviewers: grimar, jhenderson, espindola
Reviewed By: grimar
Subscribers: emaste, sbc100, arichardson, aheejin, seiya, llvm-commits, MaskRay
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68730
llvm-svn: 374795
The combination of the two flags doesn't make sense. And other linkers
seem to just ignore --export-dynamic if --relocatable is given, but
we probably should report it as an error to let users know that is
an invalid combination.
Fixes https://bugs.llvm.org/show_bug.cgi?id=43552
Differential Revision: https://reviews.llvm.org/D68441
llvm-svn: 374022
Summary:
rL371826 rearranged some output from llvm-objdump for GNU objdump compatability, but there still seem to be some more.
I think this rearrangement is a little closer. Overview of the ordering which matches GNU objdump:
* Archive headers
* File headers
* Section headers
* Symbol table
* Dwarf debugging
* Relocations (if `--disassemble` is not used)
* Section contents
* Disassembly
Reviewers: jhenderson, justice_adams, grimar, ychen, espindola
Reviewed By: jhenderson
Subscribers: aprantl, emaste, arichardson, jrtc27, atanasyan, seiya, llvm-commits, MaskRay
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68066
llvm-svn: 373671
Our .interp section is not a SyntheticSection. As a result, it terminates the
loop in removeUnusedSyntheticSections(). This has at least two consequences:
- The synthetic .bss and .bss.rel.ro sections are always present in
dynamically linked executables, even when they are not needed.
- The synthetic .ARM.exidx (and possibly other) sections are always present
in partitions other than the last one, even when not needed.
.ARM.exidx in particular is problematic because it assumes that its
list of code sections is non-empty in getLinkOrderDep(), which can
lead to a crash if the partition does not have any code sections.
Fix these problems by moving the creation of the .interp sections to the
top of createSyntheticSections(). While here, make the code a little less
error-prone by changing the add() lambdas to take a SyntheticSection instead
of an InputSectionBase.
Differential Revision: https://reviews.llvm.org/D68256
llvm-svn: 373347
Merging SHF_LINK_ORDER sections can affect semantics if the sh_link
fields point to different sections.
Specifically, for SHF_LINK_ORDER sections, the sh_link field acts as a reverse
dependency from the linked section, causing the SHF_LINK_ORDER section to
be included if the linked section is included. Merging sections with different
sh_link fields will cause the entire contents of the SHF_LINK_ORDER section
to be associated with a single (arbitrarily chosen) output section, whereas the
correct semantics are for the individual pieces of the SHF_LINK_ORDER section
to be associated with their linked output sections. As a result we can end up
incorrectly dropping SHF_LINK_ORDER section contents or including the wrong
section contents, depending on which linked sections were chosen.
Differential Revision: https://reviews.llvm.org/D68094
llvm-svn: 373255
For the following two cases, we currently suppress the symbols. This
patch emits them (compatible with GNU as).
* `test2_a = undef`: if `undef` is otherwise unused.
* `.hidden hidden`: if `hidden` is unused. This is the main point of the
patch, because omitting the symbol would cause a linker semantic
difference.
It causes a behavior change that is not compatible with GNU as:
.weakref foo1, bar1
When neither foo1 nor bar1 is used, we now emit bar1, which is arguably
more consistent.
Another change is that we will emit .TOC. for .TOC.@tocbase . For this
directive, suppressing .TOC. can be seen as a size optimization, but we
choose to drop it for simplicity and consistency.
llvm-svn: 373168
This avoids a few lines of boilerplate of dealing with C string
allocations.
Add a testcase for a case where demangling shouldn't happen.
Differential Revision: https://reviews.llvm.org/D68014
llvm-svn: 373076
Fixes PR43461 (regression caused by D67504)
The partition field of a SECTIONS-specified section is not set after
D67504. The 0 value affects findSection() which checks if the partition
field is 1.
So `Out::initArray = findSection(".init_array")` is null, and
DT_INIT_ARRAYSZ is not set.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D68087
llvm-svn: 372996
The R_MIPS_JALR relocation denotes jalr/jr instructions in position
independent code. Both these instructions take a target's address from
the $25 register. If offset to the target symbol fits into the 18-bits,
it's more efficient to replace jalr/jr by bal/b instructions.
Differential Revision: https://reviews.llvm.org/D68057
llvm-svn: 372951
D64906 allows PT_LOAD to have overlapping p_offset ranges. In the
default R RX RW RW layout + -z noseparate-code case, we do not tail pad
segments when transiting to another segment. This can save at most
3*maxPageSize bytes.
a) Before D64906, we tail pad R, RX and the first RW.
b) With -z separate-code, we tail pad R and RX, but not the first RW (RELRO).
In some cases, b) saves one file page. In some cases, b) wastes one
virtual memory page. The waste is a concern on Fuchsia. Because it uses
compressed binaries, it doesn't benefit from the saved file page.
This patch adds -z separate-loadable-segments to restore the behavior before
D64906. It can affect section addresses and can thus be used as a
debugging mechanism (see PR43214 and ld.so partition bug in
crbug.com/998712).
Reviewed By: jakehehrlich, ruiu
Differential Revision: https://reviews.llvm.org/D67481
llvm-svn: 372807
Summary:
When support for ThinLTO was first added to lld, the options that
control it were prefixed with --plugin-opt= for compatibility with
an existing implementation as a linker plugin. This change enables
shorter versions of the options to be used, as follows:
New Existing
-thinlto-emit-imports-files --plugin-opt=thinlto-emit-imports-files
-thinlto-index-only --plugin-opt=thinlto-index-only
-thinlto-index-only= --plugin-opt=thinlto-index-only=
-thinlto-object-suffix-replace= --plugin-opt=thinlto-object-suffix-replace=
-thinlto-prefix-replace= --plugin-opt=thinlto-prefix-replace=
-lto-obj-path= --plugin-opt=obj-path=
The options with the --plugin-opt= prefix have been retained as aliases
for the shorter variants so that they continue to be accepted.
Reviewers: tejohnson, ruiu, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, MaskRay, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67782
llvm-svn: 372798
When /DISCARD/ is used on an input section, that input section may have
a .ARM.exidx metadata section that depends on it. As the discard handling
comes after the .ARM.exidx synthetic section is created we need to make
sure that we account for the case where the .ARM.exidx output section
should be removed because there are no more live input sections.
Differential Revision: https://reviews.llvm.org/D67848
llvm-svn: 372781
Fixes PR38748
mergeSections() calls getOutputSectionName() to get output section
names. Two MergeInputSections may be merged even if they are made
different by SECTIONS commands.
This patch moves mergeSections() after processSectionCommands() and
addOrphanSections() to fix the issue. The new pass is renamed to
OutputSection::finalizeInputSections().
processSectionCommands() and addorphanSections() are changed to add
sections to InputSectionDescription::sectionBases.
finalizeInputSections() merges MergeInputSections and migrates
`sectionBases` to `sections`.
For the -r case, we drop an optimization that tries keeping sh_entsize
non-zero. This is for the simplicity of addOrphanSections(). The
updated merge-entsize2.s reflects the change.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67504
llvm-svn: 372734
In case of linking binary blobs which do not have any ELF headers, we can
deduce MIPS ABI ELF header flags from an `emulation` option.
Patch by Kyle Evans.
llvm-svn: 372513
Summary:
If st_link(A)=B, and A has the SHF_LINK_ORDER flag, we may dereference
a null pointer if B is garbage collected (PR43147):
1. In Wrter.cpp:compareByFilePosition, `aOut->sectionIndex` or `bOut->sectionIndex`
2. In OutputSections::finalize, `d->getParent()->sectionIndex`
Simply error and bail out to avoid null pointer dereferences. ld.bfd has
a similar error:
sh_link of section `.bar' points to discarded section `.foo0' of `a.o'
ld.bfd is more permissive in that it just checks whether the linked-to
section of the first input section is discarded. This is likely because
it sets sh_link of the output section according to the first input
section.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67761
llvm-svn: 372400
copy-rel-abs.s uses llvm-objdump to generate output that's then run
through FileCheck. llvm-objdump prints the file path at the top of the
file, which means that any build path that contains 'zed' will get
false-matched. Ensure that 'zed' is only matched after the 'SYMBOL
TABLE:' output, preventing this from failing if your build directory is
~/build/sanitized-xxx/, or similar.
llvm-svn: 372351
The --fix-cortex-a8 option implements a linker workaround for the
coretex-a8 erratum 657417. A summary of the erratum conditions is:
- A 32-bit Thumb-2 branch instruction B.w, Bcc.w, BL, BLX spans two
4KiB regions.
- The destination of the branch is to the first 4KiB region.
- The instruction before the branch is a 32-bit Thumb-2 non-branch
instruction.
The linker fix is to redirect the branch to a patch not in the first
4KiB region. The patch forwards the branch on to its target.
The cortex-a8, is an old CPU, with the first implementation of this
workaround in ld.bfd appearing in 2009. The cortex-a8 has been used in
early Android Phones and there are some critical applications that still
need to run on a cortex-a8 that have the erratum. The patch is applied
roughly 10 times on LLD and 20 on Clang when they are built with
--fix-cortex-a8 on an Arm system.
The formal erratum description is avaliable in the ARM Core Cortex-A8
(AT400/AT401) Errata Notice document. This is available from Arm on
request but it seems to be findable via a web search.
Differential Revision: https://reviews.llvm.org/D67284
llvm-svn: 371965
If there is no readonly section, we map:
* The ELF header at imageBase+maxPageSize
* Program headers at imageBase+maxPageSize+sizeof(Ehdr)
* The first section .text at imageBase+maxPageSize+sizeof(Ehdr)+sizeof(program headers)
Due to the interaction between Writer<ELFT>::fixSectionAlignments and
LinkerScript::allocateHeaders,
`alignDown(p_vaddr(R PT_LOAD)) = alignDown(p_vaddr(RX PT_LOAD))`.
The RX PT_LOAD will override the R PT_LOAD at runtime, which is not ideal:
```
// PHDR at 0x401034, should be 0x400034
PHDR 0x000034 0x00401034 0x00401034 0x000a0 0x000a0 R 0x4
// R PT_LOAD contains just Ehdr and program headers.
// At 0x401000, should be 0x400000
LOAD 0x000000 0x00401000 0x00401000 0x000d4 0x000d4 R 0x1000
LOAD 0x0000d4 0x004010d4 0x004010d4 0x00001 0x00001 R E 0x1000
```
* createPhdrs allocates the headers to the R PT_LOAD.
* fixSectionAlignments assigns `imageBase+maxPageSize+sizeof(Ehdr)+sizeof(program headers)` (formula: `alignTo(dot, maxPageSize) + dot % config->maxPageSize`) to addrExpr of .text
* allocateHeaders computes the minimum address among SHF_ALLOC sections, i.e. addr(.text)
* allocateHeaders sets address of ELF header to `addr(.text)-sizeof(Ehdr)-sizeof(program headers) = imageBase+maxPageSize`
The main observation is that when the SECTIONS command is not used, we
don't have to call allocateHeaders. This requires an assumption that
the presence of PT_PHDR and addresses of headers can be decided
regardless of address information.
This may seem natural because dot is not manipulated by a linker script.
The other thing is that we have to drop the special rule for -T<section>
in `getInitialDot`. If -Ttext is smaller than the image base, the headers
will not be allocated with the old behavior (allocateHeaders is called)
but always allocated with the new behavior.
The behavior change is not a problem. Whether and where headers are
allocated can vary among linkers, or ld.bfd across different versions
(--enable-separate-code or not). It is thus advised to use a linker
script with the PHDRS command to have a consistent behavior across
linkers. If PT_PHDR is needed, an explicit --image-base can be a simpler
alternative.
Differential Revision: https://reviews.llvm.org/D67325
llvm-svn: 371957
-z undefs is the inverse of -z defs. It allows unresolved references
from object files. This can be used to cancel --no-undefined or -z defs.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D67479
llvm-svn: 371715
microMIPS jump and link exchange instruction stores a target in a
26-bits field. Despite other microMIPS JAL instructions these bits
are target address shifted right 2 bits [1]. The patch fixes the
JALX instruction decoding and uses 2-bit shift.
[1] MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set
Differential Revision: https://reviews.llvm.org/D67320
llvm-svn: 371428
```
part.phdrs = script->hasPhdrsCommands() ? script->createPhdrs() : createPhdrs(part);
```
createPhdrs() allocates a PT_PHDR and a PF_R PT_LOAD, which will be
deleted later in LinkerScript::allocateHeaders, but leave a gap between
the program headers and the first section. Don't allocate the segments
to avoid the gap. PT_INTERP is likely not needed as well.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D67324
llvm-svn: 371398
Add file-level comments
Replace trivial Input/*.s with echo ... | llvm-mc
Delete insignificant addresses to make them more tolerant to layout changes
Simplify test output
Merge merge-section-types.s into compatible-section-types.s and add a missed case
Merge gnu-ifunc-gotpcrel.s (added in D19517) into gnu-ifunc-dso.s (added in D35119) and add missed cases
Delete typed-undef.s - covered by executable-undefined-ignoreall.s
Delete emit-relocs-shared.s - covered by emit-relocs-merge.s
Replace copy-rel-pie.s and copy-rel-pie2.s with canonical-plt-pcrel.s, canonical-plt-symbolic.s and copy-rel.s:
add -no-pie cases.
add a case that a canonical PLT can be created for STT_GNU_IFUNC. The logic in Symbols.h was untested:
// ctor of SharedSymbol
if (this->type == llvm::ELF::STT_GNU_IFUNC)
this->type = llvm::ELF::STT_FUNC;
llvm-svn: 371361
Add file-level comments
Delete insignificant addresses to make them more tolerant to layout changes
Simplify test output
Delete weak-undef-val.s - covered by relocation-undefined-weak.s
Delete weak-undef-export.s - covered by additional test added to weak-undef.s
Delete version-undef-sym.s - covered by undefined-versioned-symbol.s => version-symbol-undef.s
Delete symbol-ordering-file2.s - covered by symbol-ordering-file.s
Delete gotpcrelx.s - covered by gotpc-relax-und-dso.s => x86-64-gotpc-relax-und-dso.s
llvm-svn: 371299
Summary:
ld.bfd produces an output with --noinhibit-exec when an ASSERT fails.
Use errorOrWarn() so that we can produce an output as well.
An interesting case is that symbol assignments may execute multiple
times, so we probably want to suppress errors for non-final runs.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D67285
llvm-svn: 371225
Recommit r370635 (reverted by r371202), with one change: move addOrphanSections() before ICF.
Before, orphan sections in two different partitions may be folded and
moved to the main partition.
Now, InputSection->OutputSection assignment for orphans happens before
ICF. ICF does not fold input sections with different output sections.
With the PR43241 reproduce,
`llvm-objcopy --extract-partition libvr.so libchrome__combined.so libvr.so` => no error
Updated description:
Fixes PR39418. Complements D47241 (the non-linker-script case).
processSectionCommands() assigns input sections to output sections.
ICF is called before it, so .text.foo and .text.bar may be folded even if
their output sections are made different by SECTIONS commands.
```
markLive<ELFT>()
doIcf<ELFT>() // During ICF, we don't know the output sections
writeResult()
combineEhSections<ELFT>()
script->processSectionCommands() // InputSection -> OutputSection assignment
```
This patch splits processSectionCommands() into processSectionCommands()
and processSymbolAssignments(), and moves
processSectionCommands()/addOrphanSections() before ICF:
```
markLive<ELFT>()
combineEhSections<ELFT>()
script->processSectionCommands()
script->addOrphanSections();
doIcf<ELFT>() // should remove folded input sections
writeResult()
script->processSymbolAssignments()
```
An alternative approach is to unfold a section `sec` in
processSectionCommands() when we find `sec` and `sec->repl` belong to
different output sections. I feel this patch is superior because this
can fold more sections and the decouple of
SectionCommand/SymbolAssignment gives flexibility:
* An ExprValue can't be evaluated before its section is assigned to an
output section -> we can delete getOutputSectionVA and simplify
another place where we had to check if the output section is null.
Moreover, a case in linkerscript/early-assign-symbol.s can be handled
now.
* processSectionCommands/processSymbolAssignments can be freely moved
around.
llvm-svn: 371216
Fangrui Song