This prepares for a series of patches that merges TempScopInfo into ScopInfo to
reduce Polly's code complexity. Only ScopInfo.{cpp|h} will be left thereafter.
Moving the code of TempScopInfo in one commit makes the mains diffs simpler to
understand.
In detail, merging the following classes is planned:
TempScopInfo into ScopInfo
TempScop into Scop
IRAccess into MemoryAccess
Only moving code, no functional changes intended.
Differential Version: http://reviews.llvm.org/D12693
llvm-svn: 247274
This change has three major advantages:
- The ScopInfo becomes smaller.
- It allows to use the SCEVAffinator from outside the ScopInfo.
- A member object allows state which in turn allows e.g., caching.
Differential Revision: http://reviews.llvm.org/D9099
llvm-svn: 244730
Put all Polly targets into a single "Polly" category (i.e.
solution folder). Previously there was no recognizable scheme and most
categories contained just one or two targets or targets didn't belong
to any category.
Reviewers: grosser
llvm-svn: 242779
Query the isl_config.h macros recently added to ISL. One of it looks for
the ffs (find first set), whose functionality is available in Visual
Studio with _BitScanForward. Also add isl_ffs.c to the source files
which contains the implementation of ffs using _BitScanForward.
Reviewers: grosser
llvm-svn: 242770
Summary:
With small integer optimization (short: sio) enabled, ISL uses 32 bit
integers for its arithmetic and only falls back to a big integer library
(in the case of Polly: IMath) if an operation's result is too large.
This gives a massive performance boost for most application using ISL.
For instance, experiments with ppcg (polyhedral source-to-source
compiler) show speed-ups of 5.8 (compared to plain IMath), respectively
2.7 (compared to GMP).
In Polly, a smaller fraction of the total compile time is taken by ISL,
but the speed-ups are still very significant. The buildbots measure
compilation speed-up up to 1.8 (oourafft, floyd-warshall, symm). All
Polybench benchmarks compile in at least 9% less time, and about 20%
less on average.
Detailed Polybench compile time results (median of 10):
correlation -25.51%
covariance -24.82%
2mm -26.64%
3mm -28.69%
atax -13.70%
bicg -10.78%
cholesky -40.67%
doitgen -11.60%
gemm -11.54%
gemver -10.63%
gesummv -11.54%
mvt -9.43%
symm -41.25%
syr2k -14.71%
syrk -14.52%
trisolv -17.65%
trmm -9.78%
durbin -19.32%
dynprog -9.09%
gramschmidt -15.38%
lu -21.77%
floyd-warshall -42.71%
reg_detect -41.17%
adi -36.69%
fdtd-2d -32.61%
fdtd-apml -21.90%
jacobi-1d-imper -9.41%
jacobi-2d-imper -27.65%
seidel-2d -31.00%
Reviewers: grosser
Reviewed By: grosser
Subscribers: Meinersbur, llvm-commits, pollydev
Projects: #polly
Differential Revision: http://reviews.llvm.org/D10506
llvm-svn: 240689
There were two issues:
* ISL's configure generates include/isl/stdint.h, not isl/stdint.h as
assumed. This is also changed in the CMake build.
* Need to pass --with-int=imath to ISL's configure; the default is gmp.
Polly's configure has been regenerated due to changing configure.ac
llvm-svn: 240657
ISL with small integer optimization requires C99 to compile. gcc < 5.0
still uses C89 as default, so we need to enable the options to compile
in C99 mode.
This patch is preparing the actual activation of small integer
optimization.
Differential version: http://reviews.llvm.org/D10610
Reviewers: grosser
llvm-svn: 240322
ISL's ./configure examines the system for the stdint.h to include and
creates a header file that points to it. On C99-compatible system
#include <stdint.h>
is always valid such there no need for system introspection. This should
unbreak the build bots.
llvm-svn: 240315
Currently the Polly repository contains the ISL sources with bogus
isl_config.h and gitversion.h. This is problematic. In this state a
macro
#define __attribute__(x)
becomes active in the source, leading to various problems e.g. when
included before system header files. This patch will instead generate
the two files specific to the host system at configure-time.
For CMake, we replicate the tests that ISL's configure performs using
try_compile(). In autotools build, we just invoke ISL's configure to
generate the two files. This consequently required regenerating
autoconf/configure.
'make dist' distributions of ISL contain a file GIT_HEAD_ID which
contains the version the distribution is derived from. The repository
files themselves do not contain such a hint. In a later commit we will
replace the isl directory by the contents of such a .tar.gz. It does
not contain the files imdrover.c iprime.c pi.c and rsamath.c currently
compiled into Polly, but not used and therefore are removed by this
patch.
In the long term we plan to generate a dedicated library for ISL instead
of adding its files to Polly.
This also does not yet include the switch to small-integer optimized ISL
nor enabling C99 mode required for the former. Those will come as well
in separate patches.
Differential version: http://reviews.llvm.org/D10603
Reviewers: grosser
llvm-svn: 240301
This code has been part of Polly's GPGPU backend, which has been remove together
with the code generation backend. Development now continues in an out-of-tree
branch.
llvm-svn: 237450
Besides class, function and file names, we also change the command line option
from -polly-codegen-isl to just -polly-codegen. The isl postfix is a leftover
from the times when we still had the CLooG based -polly-codegen. Today it is
just redundant and we drop it.
llvm-svn: 237099
This change adds location information for the detected regions in Polly when the
required debug information is available.
The JSCOP output format is extended with a "location" field which contains the
information in the format "source.c:start-end"
The dot output is extended to contain the location information for each nested
region in the analyzed function.
As part of this change, the existing getDebugLocation function has been moved
into lib/Support/ScopLocation.cpp to avoid having to include
polly/ScopDetectionDiagnostics.h.
Differential Revision: http://reviews.llvm.org/D9431
Contributed-by: Roal Jordans <r.jordans@tue.nl>
llvm-svn: 236393
We do not have buildbots or anything that tests this functionality, hence it
most likely bitrots. People interested to use this functionality can always
recover it from svn history.
llvm-svn: 233570
We rename the Dependences pass to DependenceInfo as a first step to a
caching pass policy. The new DependenceInfo pass will later provide
"Dependences" for a SCoP.
To keep consistency the test folder is renamed too.
llvm-svn: 231308
This commit imports the latest isl version into lib/External/isl. The changes
relavant for Polly are:
1) Schedule trees [1] have been introduced as a more structured way to
describe schedules. Polly does not yet use them, but we may switch to them
in the near future.
2) Another set of coalescing changes [2] simplifies some data dependences and
removes a couple of code generation artifacts.
We now understand that the following sets can be merged:
{ Stmt_S1[i0, i1] -> Stmt_S2[i0 + i1] :
i0 >= 0 and i1 <= 1023 - i0 and i1 >= 1
Stmt_S1[i0, 0] -> Stmt_S2[i0] : i0 <= 1023 and i0 >= 1}
into:
{ Stmt_S1[i0, i1] -> Stmt_S2[i0 + i1] : i1 <= 1023 - i0 and i1 >= 0 and
i1 >= 1 - i0 and i0 >= 0 }
Changes of this kind reduce unnecessary specialization during code
generation.
- for (int c3 = 0; c3 <= 1023; c3 += 1) {
- if (c3 % 2 == 0) {
- Stmt_for_body3(c1, c3);
- } else
- Stmt_for_body3(c1, c3);
- }
+ for (int c3 = 0; c3 <= 1023; c3 += 1)
+ Stmt_for_body3(c1, c3);
[1] http://impact.gforge.inria.fr/impact2014/papers/impact2014-verdoolaege.pdf
[2] http://impact.gforge.inria.fr/impact2015/papers/impact2015-verdoolaege.pdf
llvm-svn: 229423
Without this change we get linker errors such as:
undefined reference to `llvm::dbgs()'
We only conditionally link in these libraries, as in BUILD_SHARED_LIBS=OFF mode,
linking in these libraries causes such functions (and especially global options)
to be defined twice. The "solution" I choose is most likely not ideal, but seems
to work. If any cmake specialist can suggest a better approach, this would be
appreciated.
We also drop a .c file that is not needed as it caused linker errors as well.
llvm-svn: 228914
With this patch Polly is always GPL-free (no dependency on GMP any more). As a
result, building and distributing Polly will be easier. Furthermore, there is no
need to tightly coordinate isl and Polly releases anymore.
We import isl b3e0fa7a05d as well as imath 4d707e5ef2. These are the git
versions Polly currently was tested with when using utils/checkout_isl.sh. The
imported libraries are both MIT-style licensed.
We build isl and imath with -fvisibility=hidden to avoid clashes in case other
projects (such as gcc) use conflicting versions of isl. The use of imath can
temporarily reduce compile-time performance of Polly. We will work on
performance tuning in tree.
Patches to isl should be contributed first to the main isl repository and can
then later be reimported to Polly.
This patch is also a prerequisite for the upcoming isl C++ interface.
llvm-svn: 228193
This commit drops the Cloog support for Polly. The scripts and
documentation are changed to only use isl as prerequisity. In the code
all Cloog specific parts have been removed and all relevant tests have
been ported to the isl backend when it was created.
llvm-svn: 223141
Polly had a copy of this pass to create the canonical induction variables
necessary for the non-scev-based code generation. As we now always use SCEV
based code generation, canonical induction variables are not needed any more.
llvm-svn: 222979
Remove the PoCC and ScopLib support from Polly as we do not have a
user/maintainer for it.
Differential Revision: http://reviews.llvm.org/D4871
llvm-svn: 215563
We only supported a very old version of OpenScop that was entirely different
to what OpenScop is today. To not confuse people, we remove this old and
unusable support. If anyone is interested to add OpenScop support back in,
the relevant patches are available in version control.
llvm-svn: 206026
to avoid build errors like this:
In file included from ../include/llvm/IR/IntrinsicInst.h:30:0,
from ../tools/polly/lib/CodeGen/BlockGenerators.cpp:28:
../include/llvm/IR/Intrinsics.h:41:34: fatal error: llvm/IR/Intrinsics.gen: No such file or directory
The earlier change in commit b1d2e6d5c3ce151ef6b7213c00019715e63d7cfb has been
accidentally reverted in:
commit 6b1963814877f5b1b161d3a73a3c8246c4ad4787
Author: simbuerg <simbuerg@91177308-0d34-0410-b5e6-96231b3b80d8>
Date: Tue Mar 11 21:26:06 2014 +0000
Refactor Polly's Pass creation and initialization.
Rename some files and adjust cmake accordingly
llvm-svn: 203843
to avoid build errors like this:
In file included from ../include/llvm/IR/IntrinsicInst.h:30:0,
from ../tools/polly/lib/CodeGen/BlockGenerators.cpp:28:
../include/llvm/IR/Intrinsics.h:41:34: fatal error: llvm/IR/Intrinsics.gen: No such file or directory
llvm-svn: 203495
For now we only mark innermost loops for the loop vectorizer. We could later
also mark not-innermost loops to enable the introduction of openmp parallelism.
llvm-svn: 202854
This fixes the buildbots who failed, because the linker eliminated most of the
Polly functionality when building without BUILD_SHARED_LIBS=ON.
Besides fixing the build, this change also brings additional functionality. With
the new separation between the general polly libraries and the functionality for
the polly module, it is now possible to link polly directly into a tool instead
of using requiring users to load a shared library.
llvm-svn: 202762
The module LLVMPolly.so links to that. There is really no reason to build a
large number of mini-libraries here, especially as we do have dependences
between the libraries that are not properly handled and that make linking fail
on darwin.
Submitted-by: David Fang <fang@csl.cornell.edu>
llvm-svn: 202743
This ModulePass schedules the set of Polly canonicalization passes. It is a
debugging tool that can be used to preoptimize .ll files for Polly processing.
llvm-svn: 198376
We now support regions with multiple entries and multiple exits natively.
Regions are not needed to be simplified to single entry and single exit.
We need to XFAIL two test cases as this change increases the scop coverage
and uncoveres two failures in the independent blocks pass. The first failure
will be fixed in a subsequent commit, the second one is in the non-default
-polly-codegen-scev mode and still needs to be fixed.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 179673
The IndVarSimplify pass in Polly uses the intrinsics header. We need to ensure
that the header is generated, before we use it. This patch fixes the problem
for the cmake build (it did not show up in the autoconf one).
Contributed by: Sameer Sahasrabuddhe <sameer.sahasrabuddhe@amd.com>
llvm-svn: 163130
The Apple linker fails by default, if some function calls can not be resolved at
link time. However, all functions that are part of LLVM itself will not be
linked into Polly, but will be provided by the compiler that Polly is loaded
into. Hence, during linking we need to ignore failures due to unresolved
function calls.
llvm-svn: 161234
Michael Kruse