Shows up rarely for 64-bit arithmetic, more frequently for the compare
patterns added in r325323.
Differential Revision: https://reviews.llvm.org/D53848
llvm-svn: 345782
SimplifySetCC could shrink a load without checking for
profitability or legality of such shink with a target.
Added checks to prevent shrinking of aligned scalar loads
in AMDGPU below dword as scalar engine does not support it.
Differential Revision: https://reviews.llvm.org/D53846
llvm-svn: 345778
lowerRangeToAssertZExt currently relies on something like EarlyCSE having
eliminated the constant range [0,1). At -O0 this leads to an assert.
Differential Revision: https://reviews.llvm.org/D53888
llvm-svn: 345770
This feature is only relevant to shaders, and is no longer used. When disabled,
lowering of reserved registers for shaders causes a compiler crash.
Remove the feature and add a test for compilation of shaders at OptNone.
Differential Revision: https://reviews.llvm.org/D53829
llvm-svn: 345763
Before this patch DbgInfoAvailable was set to true in
DwarfDebug::beginModule() or CodeViewDebug::CodeViewDebug(). This made
MIR testing weird since passes would suddenly stop dealing with debug
info just because we stopped the pipeline before the debug printers.
This patch changes the logic to initialize DbgInfoAvailable based on the
fact that debug_compile_units exist in the llvm Module. The debug
printers may then override it with false in case of debug printing being
disabled.
Differential Revision: https://reviews.llvm.org/D53885
llvm-svn: 345740
Unlike its legacy counterpart new pass manager's LoopUnrollPass does
not provide any means to select which flavors of unroll to run
(runtime, peeling, partial), relying on global defaults.
In some cases having ability to run a restricted LoopUnroll that
does more than LoopFullUnroll is needed.
Introduced LoopUnrollOptions to select optional unroll behaviors.
Added 'unroll<peeling>' to PassRegistry mainly for the sake of testing.
Reviewers: chandlerc, tejohnson
Differential Revision: https://reviews.llvm.org/D53440
llvm-svn: 345723
Summary:
Instead of writing boolean values temporarily into 32-bit VGPRs
if they are involved in PHIs or are observed from outside a loop,
we use bitwise masking operations to combine lane masks in a way
that is consistent with wave control flow.
Move SIFixSGPRCopies to before this pass, since that pass
incorrectly attempts to move SGPR phis to VGPRs.
This should recover most of the code quality that was lost with
the bug fix in "AMDGPU: Remove PHI loop condition optimization".
There are still some relevant cases where code quality could be
improved, in particular:
- We often introduce redundant masks with EXEC. Ideally, we'd
have a generic computeKnownBits-like analysis to determine
whether masks are already masked by EXEC, so we can avoid this
masking both here and when lowering uniform control flow.
- The criterion we use to determine whether a def is observed
from outside a loop is conservative: it doesn't check whether
(loop) branch conditions are uniform.
Change-Id: Ibabdb373a7510e426b90deef00f5e16c5d56e64b
Reviewers: arsenm, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, mgorny, yaxunl, dstuttard, t-tye, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53496
llvm-svn: 345719
Summary:
The optimization to early break out of loops if all threads are dead was
never fully implemented.
But the PHI node analyzing is actually causing a number of problems, so
remove all the extra code for it.
(This does actually regress code quality in a few places because it
ends up relying more heavily on phi's of i1, which we don't do a
great job with. However, since it fixes real bugs in the wild, we
should take this change. I have some prototype changes to improve
i1 lowering in general -- not just for control flow -- which should
help recover the code quality, I just need to make those changes
fit for general consumption. -- Nicolai)
Change-Id: I6fc6c6c8961857ac6009fcfb9f7e5e48dc23fbb1
Patch-by: Christian König <christian.koenig@amd.com>
Reviewers: arsenm, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53359
llvm-svn: 345718
Our a16 support was only enabled for sample/gather and buffer
load/store, but not for image load/store operations (which take an i16
as the pixel index rather than a half).
Fix our isel lowering and add test cases to prove it out.
Differential Revision: https://reviews.llvm.org/D53750
llvm-svn: 345710
For some unclear reason rewriteLoopExitValues considers recalculation
after the loop profitable if it has some "soft uses" outside the loop (i.e. any
use other than call and return), even if we have proved that it has a user inside
the loop which we think will not be optimized away.
There is no existing unit test that would explain this. This patch provides an
example when rematerialisation of exit value is not profitable but it passes
this check due to presence of a "soft use" outside the loop.
It makes no sense to recalculate value on exit if we are going to compute it
due to some irremovable within the loop. This patch disallows applying this
transform in the described situation.
Differential Revision: https://reviews.llvm.org/D51581
Reviewed By: etherzhhb
llvm-svn: 345708
optsize using masked wide loads
Under Opt for Size, the vectorizer does not vectorize interleave-groups that
have gaps at the end of the group (such as a loop that reads only the even
elements: a[2*i]) because that implies that we'll require a scalar epilogue
(which is not allowed under Opt for Size). This patch extends the support for
masked-interleave-groups (introduced by D53011 for conditional accesses) to
also cover the case of gaps in a group of loads; Targets that enable the
masked-interleave-group feature don't have to invalidate interleave-groups of
loads with gaps; they could now use masked wide-loads and shuffles (if that's
what the cost model selects).
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53668
llvm-svn: 345705
Turns out it's not always possible to figure out whether an asm()
statement argument points to a valid memory region.
One example would be per-CPU objects in the Linux kernel, for which the
addresses are calculated using the FS register and a small offset in the
.data..percpu section.
To avoid pulling all sorts of checks into the instrumentation, we replace
actual checking/unpoisoning code with calls to
msan_instrument_asm_load(ptr, size) and
msan_instrument_asm_store(ptr, size) functions in the runtime.
This patch doesn't implement the runtime hooks in compiler-rt, as there's
been no demand in assembly instrumentation for userspace apps so far.
llvm-svn: 345702
Emit pseudo instructions indicating unwind codes corresponding to each
instruction inside the prologue/epilogue. These are used by the MCLayer to
populate the .xdata section.
Differential Revision: https://reviews.llvm.org/D50288
llvm-svn: 345701
The debug-use flag must be set exactly for uses on DBG_VALUEs. This is
so obvious that it can be trivially inferred while parsing. This will
reduce noise when printing while omitting an information that has little
value to the user.
The parser will keep recognizing the flag for compatibility with old
`.mir` files.
Differential Revision: https://reviews.llvm.org/D53903
llvm-svn: 345671
InstCombine features an optimization that essentially replaces:
if (a)
free(a)
into:
free(a)
Right now, this optimization is gated by the minsize attribute and therefore
we only perform it if we can prove that we are going to be able to eliminate
the branch and the destination block.
However when casts are involved the optimization would fail to apply, because
the optimization was not smart enough to realize that it is possible to also
move the casts away from the destination block and that is harmless to the
performance since they are just noops.
E.g.,
foo(int *a)
if (a)
free((char*)a)
Wouldn't be optimized by instcombine, because
- We would refuse to hoist the `bitcast i32* %a to i8` in the source block
- We would fail to see that `bitcast i32* %a to i8` and %a are the same value.
This patch fixes both these problems:
- It teaches the pattern matching of the comparison how to look
through casts.
- It checks that whether the additional instruction in the destination block
can be hoisted and are harmless performance-wise.
- It hoists all the code of the destination block in the source block.
Differential Revision: D53356
llvm-svn: 345644
Summary:
Thunk functions in Windows are varag functions that call a musttail function
to pass the arguments after the fixup is done. We need to make sure that we
forward the arguments from the caller vararg to the callee vararg function.
This is the same mechanism that is used for Windows on X86.
Reviewers: ssijaric, eli.friedman, TomTan, mgrang, mstorsjo, rnk, compnerd, efriedma
Reviewed By: efriedma
Subscribers: efriedma, kristof.beyls, chrib, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D53843
llvm-svn: 345641
Summary:
Normalize the offset for endianess before checking
if the store cover the load in ForwardStoreValueToDirectLoad.
Without this we missed out on some optimizations for big
endian targets. If for example having a 4 bytes store followed
by a 1 byte load, loading the least significant byte from the
store, the STCoversLD check would fail (see @test4 in
test/CodeGen/AArch64/load-store-forwarding.ll).
This patch also fixes a problem seen in an out-of-tree target.
The target has i40 as a legal type, it is big endian,
and the StoreSize for i40 is 48 bits. So when normalizing
the offset for endianess we need to take the StoreSize into
account (assuming that padding added when storing into
a larger StoreSize always is added at the most significant
end).
Reviewers: niravd
Reviewed By: niravd
Subscribers: javed.absar, kristof.beyls, llvm-commits, uabelho
Differential Revision: https://reviews.llvm.org/D53776
llvm-svn: 345636
Prevents the post-RA scheduler from modifying the prologue sequences
emitting by frame lowering. This is roughly similar to what we do for
other targets: TargetInstrInfo::isSchedulingBoundary checks
isPosition(), which checks for CFI_INSTRUCTION.
isSEHInstruction is taken from D50288; it'll land with whatever patch
lands first.
Differential Revision: https://reviews.llvm.org/D53851
llvm-svn: 345634
Re-apply r345315 with testcase fixes.
Include all of the store's source vector operands when creating the
MachineMemOperand. Previously, we were missing the first operand,
making the store size seem smaller than it really is.
Differential Revision: https://reviews.llvm.org/D52816
llvm-svn: 345631
The CONCAT_VECTORS case was using the original mask element count to determine how to adjust the broadcast index. But if we looked through a bitcast the original mask size doesn't tell us anything about the concat_vectors.
This patch switchs to using the concat_vectors input element count directly instead.
Differential Revision: https://reviews.llvm.org/D53823
llvm-svn: 345626
Correct costings of SK_ExtractSubvector requires the SubTy argument to indicate the type/size of the extracted subvector.
Unlike the rest of the shuffle kinds this means that the main Ty argument represents the source vector type not the destination!
I've done my best to fix a number of vectorizer uses:
SLP - the reduction epilogue costs should be using a SK_PermuteSingleSrc shuffle as these all occur at the hardware vector width - we're not extracting (illegal) subvector types. This is causing the cost model diffs as SK_ExtractSubvector costs are poorly handled and tend to just return 1 at the moment.
LV - I'm not clear on what the SK_ExtractSubvector should represents for recurrences - I've used a <1 x ?> subvector extraction as that seems to match the VF delta.
Differential Revision: https://reviews.llvm.org/D53573
llvm-svn: 345617
Summary: --keep-global-symbol and --globalize-symbol don't make sense for undefined symbols, so it should be ignored for those symbols. This matches GNU objcopy behavior.
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Reviewed By: jhenderson, jakehehrlich
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53733
llvm-svn: 345614
shuffle (insert ?, Scalar, IndexC), V1, Mask --> insert V1, Scalar, IndexC'
The motivating case is at least a couple of steps away: I noticed that
SLPVectorizer does not analyze shuffles as well as sequences of
insert/extract in PR34724:
https://bugs.llvm.org/show_bug.cgi?id=34724
...so SLP may fail to vectorize when source code has shuffles to start
with or instcombine has converted insert/extract to shuffles.
Independent of that, an insertelement is always a simpler op for IR
analysis vs. a shuffle, so we should transform to insert when possible.
I don't think there's any codegen concern here - if a target can't insert
a scalar directly to some fixed element in a vector (x86?), then this
should get expanded to the insert+shuffle that we started with.
Differential Revision: https://reviews.llvm.org/D53507
llvm-svn: 345607
Craig Topper