Summary:
Clang -fpic defaults to -fno-semantic-interposition (GCC -fpic defaults
to -fsemantic-interposition).
Users need to specify -fsemantic-interposition to get semantic
interposition behavior.
Semantic interposition is currently a best-effort feature. There may
still be some cases where it is not handled well.
Reviewers: peter.smith, rnk, serge-sans-paille, sfertile, jfb, jdoerfert
Subscribers: dschuff, jyknight, dylanmckay, nemanjai, jvesely, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, arphaman, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D73865
Summary:
In big-endian MVE, the simple vector load/store instructions (i.e.
both contiguous and non-widening) don't all store the bytes of a
register to memory in the same order: it matters whether you did a
VSTRB.8, VSTRH.16 or VSTRW.32. Put another way, the in-register
formats of different vector types relate to each other in a different
way from the in-memory formats.
So, if you want to 'bitcast' or 'reinterpret' one vector type as
another, you have to carefully specify which you mean: did you want to
reinterpret the //register// format of one type as that of the other,
or the //memory// format?
The ACLE `vreinterpretq` intrinsics are specified to reinterpret the
register format. But I had implemented them as LLVM IR bitcast, which
is specified for all types as a reinterpretation of the memory format.
So a `vreinterpretq` intrinsic, applied to values already in registers,
would code-generate incorrectly if compiled big-endian: instead of
emitting no code, it would emit a `vrev`.
To fix this, I've introduced a new IR intrinsic to perform a
register-format reinterpretation: `@llvm.arm.mve.vreinterpretq`. It's
implemented by a trivial isel pattern that expects the input in an
MQPR register, and just returns it unchanged.
In the clang codegen, I only emit this new intrinsic where it's
actually needed: I prefer a bitcast wherever it will have the right
effect, because LLVM understands bitcasts better. So we still generate
bitcasts in little-endian mode, and even in big-endian when you're
casting between two vector types with the same lane size.
For testing, I've moved all the codegen tests of vreinterpretq out
into their own file, so that they can have a different set of RUN
lines to check both big- and little-endian.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73786
Summary:
These instructions generate a vector of consecutive elements starting
from a given base value and incrementing by 1, 2, 4 or 8. The `wdup`
versions also wrap the values back to zero when they reach a given
limit value. The instruction updates the scalar base register so that
another use of the same instruction will continue the sequence from
where the previous one left off.
At the IR level, I've represented these instructions as a family of
target-specific intrinsics with two return values (the constructed
vector and the updated base). The user-facing ACLE API provides a set
of intrinsics that throw away the written-back base and another set
that receive it as a pointer so they can update it, plus the usual
predicated versions.
Because the intrinsics return two values (as do the underlying
instructions), the isel has to be done in C++.
This is the first family of MVE intrinsics that use the `imm_1248`
immediate type in the clang Tablegen framework, so naturally, I found
I'd given it the wrong C integer type. Also added some tests of the
check that the immediate has a legal value, because this is the first
time those particular checks have been exercised.
Finally, I also had to fix a bug in MveEmitter which failed an
assertion when I nested two `seq` nodes (the inner one used to extract
the two values from the pair returned by the IR intrinsic, and the
outer one put on by the predication multiclass).
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73357
Summary:
The unpredicated case of this is trivial: the clang codegen just makes
a vector splat of the input, and LLVM isel is already prepared to
handle that. For the predicated version, I've generated a `select`
between the same vector splat and the `inactive` input parameter, and
added new Tablegen isel rules to match that pattern into a predicated
`MVE_VDUP` instruction.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73356
Driver errors if -fomit-frame-pointer is used together with -pg.
useFramePointerForTargetByDefault() returns true if -pg is specified.
=>
(!OmitFP && useFramePointerForTargetByDefault(Args, Triple)) is true
=>
We cannot get FramePointerKind::None
First attempt at implementing -fsemantic-interposition.
Rely on GlobalValue::isInterposable that already captures most of the expected
behavior.
Rely on a ModuleFlag to state whether we should respect SemanticInterposition or
not. The default remains no.
So this should be a no-op if -fsemantic-interposition isn't used, and if it is,
isInterposable being already used in most optimisation, they should honor it
properly.
Note that it only impacts architecture compiled with -fPIC and no pie.
Differential Revision: https://reviews.llvm.org/D72829
The constrained fcmp intrinsics don't allow the TRUE/FALSE predicates.
Using them will assert. To workaround this I'm emitting the old X86 specific intrinsics that were never removed from the backend when we switched to using fcmp in IR. We have no way to mark them as being strict, but that's true of all target specific intrinsics so doesn't seem like we need to solve that here.
I've also added support for selecting between signaling and quiet.
Still need to support SAE which will require using a target specific
intrinsic. Also need to fix masking to not use an AND instruction
after the compare.
Differential Revision: https://reviews.llvm.org/D72906
Summary:
Currently, sqdmulh_lane and friends from the ACLE (implemented in arm_neon.h),
are represented in LLVM IR as a (by vector) sqdmulh and a vector of (repeated)
indices, like so:
%shuffle = shufflevector <4 x i16> %v, <4 x i16> undef, <4 x i32> <i32 3, i32 3, i32 3, i32 3>
%vqdmulh2.i = tail call <4 x i16> @llvm.aarch64.neon.sqdmulh.v4i16(<4 x i16> %a, <4 x i16> %shuffle)
When %v's values are known, the shufflevector is optimized away and we are no
longer able to select the lane variant of sqdmulh in the backend.
This defeats a (hand-coded) optimization that packs several constants into a
single vector and uses the lane intrinsics to reduce register pressure and
trade-off materialising several constants for a single vector load from the
constant pool, like so:
int16x8_t v = {2,3,4,5,6,7,8,9};
a = vqdmulh_laneq_s16(a, v, 0);
b = vqdmulh_laneq_s16(b, v, 1);
c = vqdmulh_laneq_s16(c, v, 2);
d = vqdmulh_laneq_s16(d, v, 3);
[...]
In one microbenchmark from libjpeg-turbo this accounts for a 2.5% to 4%
performance difference.
We could teach the compiler to recover the lane variants, but this would likely
require its own pass. (Alternatively, "volatile" could be used on the constants
vector, but this is a bit ugly.)
This patch instead implements the following LLVM IR intrinsics for AArch64 to
maintain the original structure through IR optmization and into instruction
selection:
- sqdmulh_lane
- sqdmulh_laneq
- sqrdmulh_lane
- sqrdmulh_laneq.
These 'lane' variants need an additional register class. The second argument
must be in the lower half of the 64-bit NEON register file, but only when
operating on i16 elements.
Note that the existing patterns for shufflevector and sqdmulh into sqdmulh_lane
(etc.) remain, so code that does not rely on NEON intrinsics to generate these
instructions is not affected.
This patch also changes clang to emit these IR intrinsics for the corresponding
NEON intrinsics (AArch64 only).
Reviewers: SjoerdMeijer, dmgreen, t.p.northover, rovka, rengolin, efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, jdoerfert, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71469
Performing a cast where the result is ignored caused Clang to crash when
performing codegen for the conversion:
_Complex int a;
void fn1() { (_Complex double) a; }
This patch addresses the crash by not trying to emit the scalar conversions,
causing it to be a noop. Fixes PR44624.
This restores 59733525d3 (D71913), along
with bot fix 19c76989bb.
The bot failure should be fixed by D73418, committed as
af954e441a.
I also added a fix for non-x86 bot failures by requiring x86 in new test
lld/test/ELF/lto/devirt_vcall_vis_public.ll.
Summary:
Third part in series to support Safe Whole Program Devirtualization
Enablement, see RFC here:
http://lists.llvm.org/pipermail/llvm-dev/2019-December/137543.html
This patch adds type test metadata under -fwhole-program-vtables,
even for classes without hidden visibility. It then changes WPD to skip
devirtualization for a virtual function call when any of the compatible
vtables has public vcall visibility.
Additionally, internal LLVM options as well as lld and gold-plugin
options are added which enable upgrading all public vcall visibility
to linkage unit (hidden) visibility during LTO. This enables the more
aggressive WPD to kick in based on LTO time knowledge of the visibility
guarantees.
Support was added to all flavors of LTO WPD (regular, hybrid and
index-only), and to both the new and old LTO APIs.
Unfortunately it was not simple to split the first and second parts of
this part of the change (the unconditional emission of type tests and
the upgrading of the vcall visiblity) as I needed a way to upgrade the
public visibility on legacy WPD llvm assembly tests that don't include
linkage unit vcall visibility specifiers, to avoid a lot of test churn.
I also added a mechanism to LowerTypeTests that allows dropping type
test assume sequences we now aggressively insert when we invoke
distributed ThinLTO backends with null indexes, which is used in testing
mode, and which doesn't invoke the normal ThinLTO backend pipeline.
Depends on D71907 and D71911.
Reviewers: pcc, evgeny777, steven_wu, espindola
Subscribers: emaste, Prazek, inglorion, arichardson, hiraditya, MaskRay, dexonsmith, dang, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71913
MSVC 2013 would refuse to pass highly aligned things (typically vectors
and aggregates) by value. Users would receive this error:
t.cpp(11) : error C2719: 'w': formal parameter with __declspec(align('32')) won't be aligned
t.cpp(11) : error C2719: 'q': formal parameter with __declspec(align('32')) won't be aligned
However, in MSVC 2015, this behavior was changed, and highly aligned
things are now passed indirectly. To avoid breaking backwards
incompatibility, objects that do not have a *required* high alignment
(i.e. double) are still passed directly, even though they are not
naturally aligned. This change implements the new behavior of passing
things indirectly.
The new behavior is:
- up to three vector parameters can be passed in [XYZ]MM0-2
- remaining arguments with required alignment greater than 4 bytes are
passed indirectly
Previously, MSVC never passed things truly indirectly, meaning clang
would always apply the byval attribute to indirect arguments. We had to
go to the trouble of adding inalloca so that non-trivially copyable C++
types could be passed in place without copying the object
representation. When inalloca was added, we asserted that all arguments
passed indirectly must use byval. With this change, that assert no
longer holds, and I had to update inalloca to handle that case. The
implicit sret pointer parameter was already handled this way, and this
change generalizes some of that logic to arguments.
There are two cases that this change leaves unfixed:
1. objects that are non-trivially copyable *and* overaligned
2. vectorcall + inalloca + vectors
For case 1, I need to touch C++ ABI code in MicrosoftCXXABI.cpp, so I
want to do it in a follow-up.
For case 2, my fix is one line, but it will require updating IR tests to
use lots of inreg, so I wanted to separate it out.
Related to D71915 and D72110
Fixes most of PR44395
Reviewed By: rjmccall, craig.topper, erichkeane
Differential Revision: https://reviews.llvm.org/D72114
Summary:
Much like with the previous patch (D73005) with `AssumeAlignedAttr`
handling, results in mildly more readable IR,
and will improve test coverage in upcoming patch.
Note that in `AllocAlignAttr`'s case, there is no requirement
for that alignment parameter to end up being an I-C-E.
Reviewers: erichkeane, jdoerfert, hfinkel, aaron.ballman, rsmith
Reviewed By: erichkeane
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D73006
Summary:
This should be mostly NFC - we still lower the same alignment
knowledge to the IR. The main reasoning here is that
this somewhat improves readability of IR like this,
and will improve test coverage in upcoming patch.
Even though the alignment is guaranteed to always be an I-C-E,
we don't always materialize it as llvm's Alignment Attribute because:
1. There may be a non-zero offset
2. We may be sanitizing for alignment
Note that if there already was an IR alignment attribute
on return value, we union them, and thus the alignment
only ever rises.
Also, there is a second relevant clang attribute `AllocAlignAttr`,
so that is why `AbstractAssumeAlignedAttrEmitter` is templated.
Reviewers: erichkeane, jdoerfert, hfinkel, aaron.ballman, rsmith
Reviewed By: erichkeane
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D73005
Summary:
Apparently nobody has tried this in months of development. It turns
out that `FunctionDecl::getBuiltinID` will never consider a function
to be a builtin if it is in C++ and not extern "C". So none of the
function declarations in <arm_mve.h> are recognized as builtins when
clang is compiling in C++ mode: it just emits calls to them as
ordinary functions, which then turn out not to exist at link time.
The trivial fix is to wrap most of arm_mve.h in an extern "C".
Added a test in clang/test/CodeGen/arm-mve-intrinsics which checks
basic functioning of the MVE header file in C++ mode. I've filled it
with copies of existing test functions from other files in that
directory, including a few moderately tricky cases of overloading (in
particular one that relies on the strict-polymorphism attribute added
in D72518).
(I considered making //every// test in that directory compile in both
C and C++ mode and check the code generation was identical. But I
think that would increase testing time by more than the value it adds,
and also update_cc_test_checks gets confused when the output function
name varies between RUN lines.)
Reviewers: LukeGeeson, MarkMurrayARM, miyuki, dmgreen
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D73268
Summary:
Immediate vmvnq is code-generated as a simple vector constant in IR,
and left to the backend to recognize that it can be created with an
MVE VMVN instruction. The predicated version is represented as a
select between the input and the same constant, and I've added a
Tablegen isel rule to turn that into a predicated VMVN. (That should
be better than the previous VMVN + VPSEL: it's the same number of
instructions but now it can fold into an adjacent VPT block.)
The unpredicated forms of VBIC and VORR are done by enabling the same
isel lowering as for NEON, recognizing appropriate immediates and
rewriting them as ARMISD::VBICIMM / ARMISD::VORRIMM SDNodes, which I
then instruction-select into the right MVE instructions (now that I've
also reworked those instructions to use the same MC operand encoding).
In order to do that, I had to promote the Tablegen SDNode instance
`NEONvorrImm` to a general `ARMvorrImm` available in MVE as well, and
similarly for `NEONvbicImm`.
The predicated forms of VBIC and VORR are represented as a vector
select between the original input vector and the output of the
unpredicated operation. The main convenience of this is that it still
lets me use the existing isel lowering for VBICIMM/VORRIMM, and not
have to write another copy of the operand encoding translation code.
This intrinsic family is the first to use the `imm_simd` system I put
into the MveEmitter tablegen backend. So, naturally, it showed up a
bug or two (emitting bogus range checks and the like). Fixed those,
and added a full set of tests for the permissible immediates in the
existing Sema test.
Also adjusted the isel pattern for `vmovlb.u8`, which stopped matching
because lowering started turning its input into a VBICIMM. Now it
recognizes the VBICIMM instead.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72934
Summary:
We shouldn't be just giving up if we find one of them
(like we currently do with `AssumeAlignedAttr`),
we should emit them all.
As the tests show, even if we materialized good knowledge
from `__attribute__((assume_aligned(32)`, it doesn't mean
`__attribute__((alloc_align([...])))` info won't be useful.
It might be, but that isn't given.
Reviewers: erichkeane, jdoerfert, aaron.ballman
Reviewed By: erichkeane
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72979
When constrained floating point is enabled the SystemZ-specific builtins
don't use constrained intrinsics in some cases. Fix that.
Differential Revision: https://reviews.llvm.org/D72722
Summary:
This patch resumes the work of D16586.
According to the AAPCS, volatile bit-fields should
be accessed using containers of the widht of their
declarative type. In such case:
```
struct S1 {
short a : 1;
}
```
should be accessed using load and stores of the width
(sizeof(short)), where now the compiler does only load
the minimum required width (char in this case).
However, as discussed in D16586,
that could overwrite non-volatile bit-fields, which
conflicted with C and C++ object models by creating
data race conditions that are not part of the bit-field,
e.g.
```
struct S2 {
short a;
int b : 16;
}
```
Accessing `S2.b` would also access `S2.a`.
The AAPCS Release 2019Q1.1
(https://static.docs.arm.com/ihi0042/g/aapcs32.pdf)
section 8.1 Data Types, page 35, "Volatile bit-fields -
preserving number and width of container accesses" has been
updated to avoid conflict with the C++ Memory Model.
Now it reads in the note:
```
This ABI does not place any restrictions on the access widths
of bit-fields where the container overlaps with a non-bit-field member.
This is because the C/C++ memory model defines these as being separate
memory locations, which can be accessed by two threads
simultaneously. For this reason, compilers must be permitted to use a
narrower memory access width (including splitting the access
into multiple instructions) to avoid writing to a different memory location.
```
I've updated the patch D16586 to follow such behavior by verifying that we
only change volatile bit-field access when:
- it won't overlap with any other non-bit-field member
- we only access memory inside the bounds of the record
Regarding the number of memory accesses, that should be preserved, that will
be implemented by D67399.
Reviewers: rsmith, rjmccall, eli.friedman, ostannard
Subscribers: ostannard, kristof.beyls, cfe-commits, carwil, olista01
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72932
Extend -fxray-instrumentation-bundle to split function-entry and
function-exit into two separate options, so that it is possible to
instrument only function entry or only function exit. For use cases
that only care about one or the other this will save significant overhead
and code size.
Differential Revision: https://reviews.llvm.org/D72890
XRay allows tuning by minimum function size, but also always instruments
functions with loops in them. If the minimum function size is set to a
large value the loop instrumention ends up causing most functions to be
instrumented anyway. This adds a new flag, -fxray-ignore-loops, to disable
the loop detection logic.
Differential Revision: https://reviews.llvm.org/D72873
[this re-applies c0176916a4
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
Summary:
When compiling with -munwind-tables, the SEH filter funclet needs the uwtable
function attribute, which gets automatically added if we use
SetInternalFunctionAttributes. The filter funclet is internal so this seems
appropriate.
Reviewers: rnk
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72786
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
I noticed one bot failure due to
24a00ef240 because the wildcard matching
was not working as intended, fixed it to act similar to other checks of
CGSCCToFunctionPassAdaptor.
This restores 2af97be802 (reverted at
6288f86e87), with all the fixes I had
applied at the time, along with a new fix for non-determinism in the
ordering of a couple of passes due to being accessed as parameters on
the same call.
I've also added --dump-input=fail to the new tests so I can more
thoroughly fix any additional failures.
Summary:
Before this change, X86_32ABIInfo::classifyArgument would be called
twice on vector arguments to vectorcall functions. This function has
side effects to track GPR register usage, and this would lead to
incorrect GPR usage in some cases. The specific case I noticed is from
running out of XMM registers with mixed FP and vector arguments and no
aggregates of any kind. Consider this prototype:
void __vectorcall vectorcall_indirect_vec(
double xmm0, double xmm1, double xmm2, double xmm3, double xmm4,
__m128 xmm5,
__m128 ecx,
int edx,
__m128 mem);
classifyArgument has no effects when called on a plain FP type, but when
called on a vector type, it modifies FreeRegs to model GPR consumption.
However, this should not happen during the vector call first pass.
I refactored the code to unify vectorcall HVA logic with regcall HVA
logic. The conventions pass HVAs in registers differently (expanded vs.
not expanded), but if they do not fit in registers, they both pass them
indirectly by address.
Reviewers: erichkeane, craig.topper
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72110
For IR input files, we currently use LLVM diagnostic handler even the
compilation is from clang. As a result, we are not able to use -Rpass
to get the transformation reports. Some warnings are not handled
properly either: We found many mysterious warnings in our ThinLTO backend
compilations in SamplePGO and CSPGO. An example of the warning:
"warning: net/proto2/public/metadata_lite.h:51:21: 0.02% (1 / 4999)"
This turns out to be a warning by Wmisexpect, which is supposed to be
filtered out by default. But since the filter is in clang's
diagnostic hander, we emit these incomplete warnings from LLVM's
diagnostic handler.
This patch uses clang diagnostic handler for IR input files. We create
a fake backendconsumer just to install the diagnostic handler.
With this change, we will have proper handling of all the warnings and we can
use -Rpass* options in IR input files compilation.
Also note that with is patch, LLVM's diagnostic options, like
"-mllvm -pass-remarks=*", are no longer be able to get optimization remarks.
Differential Revision: https://reviews.llvm.org/D72523
Summary:
Previously, since these aggregates are > 2*XLen, Clang would think they
were being returned indirectly and thus would decrease the number of
available GPRs available by 1. For long argument lists this could lead
to a struct argument incorrectly being passed indirectly.
Reviewers: asb, lenary
Reviewed By: asb, lenary
Subscribers: luismarques, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, lenary, s.egerton, pzheng, sameer.abuasal, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D69590
This reverts commit 2af97be802.
After attempting to fix bot failures from matching issues (mostly due to
inconsistent printing of "llvm::" prefixes on objects, and
AnalysisManager objects being printed differntly, I am now seeing some
differences I don't understand (real differences in the passes being
printed). Giving up at this point to allow the bots to recover. Will
revisit later.
Along with the previous fix for bot failures from
2af97be802, need to add a wildcard in a
couple of places where my local output did not print "llvm::" but the
bot is.
Hopefully final bot fix for last few failures from
2af97be802.
Looks like sometimes the "llvm::" preceeding objects get printed in the
debug pass manager output and sometimes they don't. Replace with
wildcard matching.
Additional fixes for bot failures from 2af97be802.
Remove more exact matching on AnalyisManagers, as they can vary.
Also allow different orders between LoopAnalysis and
BranchProbabilityAnalysis as that can vary due to both being accessed in
the parameter list of a call.
Should fix most of the buildbot failures from
2af97be802, by loosening up the matching
on the AnalysisProxy output.
Added in --dump-input=fail on the one test that appears to be something
different, so I can hopefully debug it better.
Summary:
I've added some more extensive ThinLTO pipeline testing with the new PM,
motivated by the bug fixed in D72386.
I beefed up llvm/test/Other/new-pm-pgo.ll a little so that it tests
ThinLTO pre and post link with PGO, similar to the testing for the
default pipelines with PGO.
Added new pre and post link PGO tests for both instrumentation and
sample PGO that exhaustively test the pipelines at different
optimization levels via opt.
Added a clang test to exhaustively test the post link pipeline invoked for
distributed builds. I am currently only testing O2 and O3 since these
are the most important for performance.
It would be nice to add similar exhaustive testing for full LTO, and for
the old PM, but I don't have the bandwidth now and this is a start to
cover some of the situations that are not currently default and were
under tested.
Reviewers: wmi
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, jfb, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72538
All 130+ f_Group flags that take an argument allow it after a '=',
except for fdebug-complation-dir. Add a Joined<> alias so that
it behaves consistently with all the other f_Group flags.
(Keep the old Separate flag for backwards compat.)
In the backend, this feature is implemented with the function attribute
"patchable-function-entry". Both the attribute and XRay use
TargetOpcode::PATCHABLE_FUNCTION_ENTER, so the two features are
incompatible.
Reviewed By: ostannard, MaskRay
Differential Revision: https://reviews.llvm.org/D72222
This feature is generic. Make it applicable for AArch64 and X86 because
the backend has only implemented NOP insertion for AArch64 and X86.
Reviewed By: nickdesaulniers, aaron.ballman
Differential Revision: https://reviews.llvm.org/D72221
Summary:
Avoid using the `nocf_check` attribute with Control Flow Guard. Instead, use a
new `"guard_nocf"` function attribute to indicate that checks should not be
added on indirect calls within that function. Add support for
`__declspec(guard(nocf))` following the same syntax as MSVC.
Reviewers: rnk, dmajor, pcc, hans, aaron.ballman
Reviewed By: aaron.ballman
Subscribers: aaron.ballman, tomrittervg, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72167
Update the IRBuilder to generate constrained FP comparisons in
CreateFCmp when IsFPConstrained is true, similar to the other
places in the IRBuilder.
Also, add a new CreateFCmpS to emit signaling FP comparisons,
and use it in clang where comparisons are supposed to be signaling
(currently, only when emitting code for the <, <=, >, >= operators).
Note that there is currently no way to add fast-math flags to a
constrained FP comparison, since this is implemented as an intrinsic
call that returns a boolean type, and FMF are only allowed for calls
returning a floating-point type. However, given the discussion around
https://bugs.llvm.org/show_bug.cgi?id=42179, it seems that FCmp itself
really shouldn't have any FMF either, so this is probably OK.
Reviewed by: craig.topper
Differential Revision: https://reviews.llvm.org/D71467
Summary:
A copy-paste error in `arm_mve.td` meant that the MVE `vqrshrun`
intrinsic family was generating the `vqshrun` machine instruction,
because in the IR intrinsic call, the rounding flag argument was set
to 0 rather than 1.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72496
If a system header provides an (inline) implementation of some of their
function, clang still matches on the function name and generate the appropriate
llvm builtin, e.g. memcpy. This behavior is in line with glibc recommendation «
users may not provide their own version of symbols » but doesn't account for the
fact that glibc itself can provide inline version of some functions.
It is the case for the memcpy function when -D_FORTIFY_SOURCE=1 is on. In that
case an inline version of memcpy calls __memcpy_chk, a function that performs
extra runtime checks. Clang currently ignores the inline version and thus
provides no runtime check.
This code fixes the issue by detecting functions whose name is a builtin name
but also have an inline implementation.
Differential Revision: https://reviews.llvm.org/D71082
down to pass builder in ltobackend.
Currently CodeGenOpts like UnrollLoops/VectorizeLoop/VectorizeSLP in clang
are not passed down to pass builder in ltobackend when new pass manager is
used. This is inconsistent with the behavior when new pass manager is used
and thinlto is not used. Such inconsistency causes slp vectorization pass
not being enabled in ltobackend for O3 + thinlto right now. This patch
fixes that.
Differential Revision: https://reviews.llvm.org/D72386
This change introduces three new builtins (which work on both pointers
and integers) that can be used instead of common bitwise arithmetic:
__builtin_align_up(x, alignment), __builtin_align_down(x, alignment) and
__builtin_is_aligned(x, alignment).
I originally added these builtins to the CHERI fork of LLVM a few years ago
to handle the slightly different C semantics that we use for CHERI [1].
Until recently these builtins (or sequences of other builtins) were
required to generate correct code. I have since made changes to the default
C semantics so that they are no longer strictly necessary (but using them
does generate slightly more efficient code). However, based on our experience
using them in various projects over the past few years, I believe that adding
these builtins to clang would be useful.
These builtins have the following benefit over bit-manipulation and casts
via uintptr_t:
- The named builtins clearly convey the semantics of the operation. While
checking alignment using __builtin_is_aligned(x, 16) versus
((x & 15) == 0) is probably not a huge win in readably, I personally find
__builtin_align_up(x, N) a lot easier to read than (x+(N-1))&~(N-1).
- They preserve the type of the argument (including const qualifiers). When
using casts via uintptr_t, it is easy to cast to the wrong type or strip
qualifiers such as const.
- If the alignment argument is a constant value, clang can check that it is
a power-of-two and within the range of the type. Since the semantics of
these builtins is well defined compared to arbitrary bit-manipulation,
it is possible to add a UBSAN checker that the run-time value is a valid
power-of-two. I intend to add this as a follow-up to this change.
- The builtins avoids int-to-pointer casts both in C and LLVM IR.
In the future (i.e. once most optimizations handle it), we could use the new
llvm.ptrmask intrinsic to avoid the ptrtoint instruction that would normally
be generated.
- They can be used to round up/down to the next aligned value for both
integers and pointers without requiring two separate macros.
- In many projects the alignment operations are already wrapped in macros (e.g.
roundup2 and rounddown2 in FreeBSD), so by replacing the macro implementation
with a builtin call, we get improved diagnostics for many call-sites while
only having to change a few lines.
- Finally, the builtins also emit assume_aligned metadata when used on pointers.
This can improve code generation compared to the uintptr_t casts.
[1] In our CHERI compiler we have compilation mode where all pointers are
implemented as capabilities (essentially unforgeable 128-bit fat pointers).
In our original model, casts from uintptr_t (which is a 128-bit capability)
to an integer value returned the "offset" of the capability (i.e. the
difference between the virtual address and the base of the allocation).
This causes problems for cases such as checking the alignment: for example, the
expression `if ((uintptr_t)ptr & 63) == 0` is generally used to check if the
pointer is aligned to a multiple of 64 bytes. The problem with offsets is that
any pointer to the beginning of an allocation will have an offset of zero, so
this check always succeeds in that case (even if the address is not correctly
aligned). The same issues also exist when aligning up or down. Using the
alignment builtins ensures that the address is used instead of the offset. While
I have since changed the default C semantics to return the address instead of
the offset when casting, this offset compilation mode can still be used by
passing a command-line flag.
Reviewers: rsmith, aaron.ballman, theraven, fhahn, lebedev.ri, nlopes, aqjune
Reviewed By: aaron.ballman, lebedev.ri
Differential Revision: https://reviews.llvm.org/D71499
Summary:
Extend D71677 to apply to all branch-target operands, rather than special-casing call instructions.
Also add a regression test for llvm.org/PR44272, since this finishes fixing it.
Reviewers: thakis, rnk
Reviewed By: thakis
Subscribers: merge_guards_bot, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72417
Summary:
A few of the ARM MVE builtins directly return a structure type. This
causes an assertion failure at code-gen time if you try to assign the
result of the builtin to a variable, because the `RValue` created in
`EmitBuiltinExpr` from the `llvm::Value` produced by codegen is always
made by `RValue::get()`, which creates a non-aggregate `RValue` that
will fail an assertion when `AggExprEmitter::withReturnValueSlot` calls
`Src.getAggregatePointer()`. A similar failure occurs if you try to use
the struct return value directly to extract one field, e.g.
`vld2q(address).val[0]`.
The existing code-gen tests for those MVE builtins pass the returned
structure type directly to the C `return` statement, which apparently
managed to avoid that particular code path, so we didn't notice the
crash.
Now `EmitBuiltinExpr` checks the evaluation kind of the builtin's return
value, and does the necessary handling for aggregate returns. I've added
two extra test cases, both of which crashed before this change.
Reviewers: dmgreen, rjmccall
Reviewed By: rjmccall
Subscribers: kristof.beyls, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72271
Architecturally, it's allowed to have MVE-I without an FPU, thus
-mfpu=none should not disable MVE-I, or moves to/from FP-registers.
This patch removes `+/-fpregs` from features unconditionally added to
target feature list, depending on FPU and moves the logic to Clang
driver, where the negative form (`-fpregs`) is conditionally added to
the target features list for the cases of `-mfloat-abi=soft`, or
`-mfpu=none` without either `+mve` or `+mve.fp`. Only the negative
form is added by the driver, the positive one is derived from other
features in the backend.
Differential Revision: https://reviews.llvm.org/D71843
This batch of intrinsics fills in all the shift instructions that take
a variable shift distance in a register, instead of an immediate. Some
of these instructions take a single shift distance in a scalar
register and apply it to all lanes; others take a vector of per-lane
distances.
These instructions are all basically one family, varying in whether
they saturate out-of-range values, and whether they round when bits
are shifted off the bottom. I've implemented them at the IR level by a
much smaller family of IR intrinsics, which take flag parameters to
indicate saturating and/or rounding (along with the usual one to
specify signed/unsigned integers).
An oddity is that all of them are //left// shift instructions – but if
you pass a negative shift count, they'll shift right. So the vector
shift distances are always vectors of //signed// integers, regardless
of whether you're considering the other input vector to be of signed
or unsigned. Also, even the simplest `vshlq` instruction in this
family (neither saturating nor rounding) has to be implemented as an
IR intrinsic, because the ordinary LLVM IR `shl` operation would
consider an out-of-range shift count to be undefined behavior.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72329
This batch of intrinsics covers two sets of immediate shift
instructions, which have in common that they only overwrite part of
their output register and so they need an extra input giving its
previous value.
The VSLI and VSRI instructions shift each lane of the input vector
left or right just as if they were normal immediate VSHL/VSHR, but
then they only overwrite the output bits that correspond to actual
shifted bits of the input. So VSLI will leave the low n bits of each
output lane unchanged, and VSRI the same with the top n bits.
The V[Q][R]SHR[U]N family are all narrowing shifts: they take an input
vector of 2n-bit integers, shift each lane right by a constant, and
then narrowing the shifted result to only n bits. So they only
overwrite half of the n-bit lanes in the output register, and the B/T
suffix indicates whether it's the bottom or top half of each 2n-bit
lane.
I've implemented the whole of the latter family using a single IR
intrinsic `vshrn`, which takes a lot of i32 parameters indicating
which instruction it expands to (by specifying signedness of the input
and output types, whether it saturates and/or rounds, etc).
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72328
An empty string literal in an asm label does not make a whole lot of sense. GCC
does not diagnose such a construct, but it also generates code that cannot be
assembled by gas should two symbols have an empty asm label within the same TU.
This does not affect an asm statement with an empty string literal, which is
still a useful construct.
Summary:
Running an end-to-end test last week I noticed that a lot of the ACLE
intrinsics that operate differently on vectors of signed and unsigned
integers were ending up generating the signed version of the
instruction unconditionally. This is because the IR intrinsics had no
way to distinguish signed from unsigned: the LLVM type system just
calls them both `v8i16` (or whatever), so you need either separate
intrinsics for signed and unsigned, or a flag parameter that tells
ISel which one to choose.
This patch fixes all the problems of that kind that I've noticed, by
adding an i32 flag parameter to many of the IR intrinsics which is set
to 1 for unsigned (matching the existing practice in cases where we
got it right), and conditioning all the isel patterns on that flag. So
the fundamental change is in `IntrinsicsARM.td`, changing the
low-level IR intrinsics API; there are knock-on changes in
`arm_mve.td` (adjusting code gen for the ACLE intrinsics to use the
modified API) and in `ARMInstrMVE.td` (adjusting isel to expect the
new unsigned flags). The rest of this patch is boringly updating tests.
Reviewers: dmgreen, miyuki, MarkMurrayARM
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72270
Summary:
The ACLE intrinsics with `gather_base` or `scatter_base` in the name
are wrappers on the MVE load/store instructions that take a vector of
base addresses and an immediate offset. The immediate offset can be up
to 127 times the alignment unit, and it can be positive or negative.
At the MC layer, we got that right. But in the Sema error checking for
the wrapping intrinsics, the offset was erroneously constrained to be
positive.
To fix this I've adjusted the `imm_mem7bit` class in the Tablegen that
defines the intrinsics. But that causes integer literals like
`0xfffffffffffffe04` to appear in the autogenerated calls to
`SemaBuiltinConstantArgRange`, which provokes a compiler warning
because that's out of the non-overflowing range of an `int64_t`. So
I've also tweaked `MveEmitter` to emit that as `-0x1fc` instead.
Updated the tests of the Sema checks themselves, and also adjusted a
random sample of the CodeGen tests to actually use negative offsets
and prove they get all the way through code generation without causing
a crash.
Reviewers: dmgreen, miyuki, MarkMurrayARM
Reviewed By: dmgreen
Subscribers: kristof.beyls, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72268
We already recognize the __builtin versions of these, might as well
recognize the libcall version.
Differential Revision: https://reviews.llvm.org/D72028
This replaces the fsub -0.0 idiom with an fneg instruction. We didn't see to have a test that showed the current codegen. Just some tests for constant folding and a test that was only checking the declare lines for libcalls. The latter just checked that we did not have a declare for @conj when using __builtin_conj.
Differential Revision: https://reviews.llvm.org/D72012
We have an fneg instruction now and should use it instead of the fsub -0.0 idiom. Looks like we had no test that showed that we handled the negation cases here so I've added new tests.
Differential Revision: https://reviews.llvm.org/D72010
Summary:
Amend MS offset operator implementation, to more closely fit with its MS counterpart:
1. InlineAsm: evaluate non-local source entities to their (address) location
2. Provide a mean with which one may acquire the address of an assembly label via MS syntax, rather than yielding a memory reference (i.e. "offset asm_label" and "$asm_label" should be synonymous
3. address PR32530
Based on http://llvm.org/D37461
Fix broken test where the break appears unrelated.
- Set up appropriate memory-input rewrites for variable references.
- Intel-dialect assembly printing now correctly handles addresses by adding "offset".
- Pass offsets as immediate operands (using "r" constraint for offsets of locals).
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D71436
The validateOutputSize and validateInputSize need to check whether
AVX or AVX512 are enabled. But this can be affected by the
target attribute so we need to factor that in.
This patch moves some of the code from CodeGen to create an
appropriate feature map that we can pass to the function.
Differential Revision: https://reviews.llvm.org/D68627
Commit d77ae1552f
("[DebugInfo] Support to emit debugInfo for extern variables")
added deebugInfo for extern variables for BPF target.
The commit is reverted by 891e25b02d
as the committed tests using %clang instead of %clang_cc1 causing
test failed in certain scenarios as reported by Reid Kleckner.
This patch fixed the tests by using %clang_cc1.
Differential Revision: https://reviews.llvm.org/D71818
Summary:
This is documented as the appropriate template modifier for call operands.
Fixes PR44272, and adds a regression test.
Also adds support for operand modifiers in Intel-style inline assembly.
Reviewers: rnk
Reviewed By: rnk
Subscribers: merge_guards_bot, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71677
GCC's x86 and s390 ports support -mrecord-mcount. Other ports reject the
option.
aarch64-linux-gnu-gcc: error: unrecognized command line option ‘-mrecord-mcount’
Allowing this option can cause failures when building Linux kernel for
aarch64, powerpc64, etc, which will think the feature is available if
the clang command returns 0.
Recognize -mrecord-mcount from the command line and add a function attribute
"mrecord-mcount" when passed.
Only valid on SystemZ (when used with -mfentry).
Review: Ulrich Weigand
https://reviews.llvm.org/D71627
Summary:
The vector pattern `(a + b + 1) / 2` was previously selected to an
avgr_u instruction regardless of nuw flags, but this is incorrect in
the case where either addition may have an unsigned wrap. This CL
changes the existing pattern to require both adds to have nuw flags
and adds builtin functions and intrinsics for the avgr_u instructions
because the corrected pattern is not representable in C.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71648
Let the "mnop-mcount" function attribute simply be present or non-present.
Update SystemZ backend as well to use hasFnAttribute() instead.
Review: Ulrich Weigand
https://reviews.llvm.org/D71669
Summary:
This adds parsing of the qualifiers __ptr32, __ptr64, __sptr, and __uptr and
lowers them to the corresponding address space pointer for 32-bit and 64-bit pointers.
(32/64-bit pointers added in https://reviews.llvm.org/D69639)
A large part of this patch is making these pointers ignore the address space
when doing things like overloading and casting.
https://bugs.llvm.org/show_bug.cgi?id=42359
Reviewers: rnk, rsmith
Subscribers: jholewinski, jvesely, nhaehnle, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71039
The following intrinsics currently carry a rounding mode metadata argument:
llvm.experimental.constrained.minnum
llvm.experimental.constrained.maxnum
llvm.experimental.constrained.ceil
llvm.experimental.constrained.floor
llvm.experimental.constrained.round
llvm.experimental.constrained.trunc
This is not useful since the semantics of those intrinsics do not in any way
depend on the rounding mode. In similar cases, other constrained intrinsics
do not have the rounding mode argument. Remove it here as well.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71218
Recognize -mpacked-stack from the command line and add a function attribute
"mpacked-stack" when passed. This is needed for building the Linux kernel.
If this option is passed for any other target than SystemZ, an error is
generated.
Review: Ulrich Weigand
https://reviews.llvm.org/D71441
The FP-classification builtins (__builtin_isfinite, etc) use variadic
packs in the definition file to mean an overload set. Because of that,
floats were converted to doubles, which is incorrect. There WAS a patch
to remove the cast after the fact.
THis patch switches these builtins to just be custom type checking,
calls the implicit conversions for the integer members, and makes sure
the correct L->R casts are put into place, then does type checking like
normal.
A future direction (that wouldn't be NFC) would consider making
conversions for the floating point parameter legal.
Note: The initial patch for this missed that certain systems need to
still convert half to float, since they dont' support that type.
This change updates the clang front end to add symbols to llvm.used
when they have explicit export_name attribute.
Differential Revision: https://reviews.llvm.org/D71493
Summary:
The instructions were originally implemented via builtins and
intrinsics so users would have to explicitly opt-in to using
them. This was useful while were validating whether these instructions
should have been merged into the spec proposal. Now that they have
been, we can use normal codegen patterns, so the intrinsics and
builtins are no longer useful.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71500
As brought up in D71467, a group of floating point builtins
automatically promoted floats to doubles because they used the variadic
builtin tag to support an overload set. The result is that the
parameters were treated as a variadic pack, which always promots
float->double.
This resulted in the wrong answer being given in cases with certain
values of NaN.
Summary:
This patch adds intrinsics for the following MVE instructions:
* VABAV
* VMLADAV, VMLSDAV
* VMLALDAV, VMLSLDAV
* VRMLALDAVH, VRMLSLDAVH
Each of the above 4 groups has a corresponding new LLVM IR intrinsic,
since the instructions cannot be easily represented using
general-purpose IR operations.
Reviewers: simon_tatham, ostannard, dmgreen, MarkMurrayARM
Reviewed By: MarkMurrayARM
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71062
Summary:
This fills in the remaining shift operations that take a single vector
input and an immediate shift count: the `vqshl`, `vqshlu`, `vrshr` and
`vshll[bt]` families.
`vshll[bt]` (which shifts each input lane left into a double-width
output lane) is the most interesting one. There are separate MC
instruction ids for shifting by exactly the input lane width and
shifting by less than that, because the instruction encoding is so
completely different for the lane-width special case. So I had to
write two sets of patterns to match based on the immediate shift
count, which involved adding a ComplexPattern matcher to avoid the
general-case pattern accidentally matching the special case too. For
that family I've made sure to add an llc codegen test for both
versions of each instruction.
I'm experimenting with a new strategy for parametrising the isel
patterns for all these instructions: adding extra fields to the
relevant `Instruction` subclass itself, which are ignored by the
Tablegen backends that generate the MC data, but can be retrieved from
each instance of that instruction subclass when it's passed as a
template parameter to the multiclass that generates its isel patterns.
A nice effect of that is that I can fill in those informational fields
using `let` blocks, rather than having to type them out once per
instruction at `defm` time.
(As a result, quite a lot of existing instruction `def`s are
reindented by this patch, so it's clearer to read with whitespace
changes ignored.)
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71458
Summary:
Better use of multiclass is used, and this helped find some existing
bugs in the predicated VMULL* intrinsics, which are now fixed.
The refactored VMULL[TB]Q_(INT|POLY)_M() intrinsics were discovered
to have an argument ("inactive") with incorrect type, and this required
a fix that is included in this whole patch. The argument "inactive"
should have been the same width (per vector element) as the return
type of the intrinsic, but was not in the case where the return type
was double the element width of the input types.
To assist in testing the multiclassing , and to thwart further gremlins,
the unit tests are improved in scope.
The *.ll tests are all generated by a small bit of throw-away scripting
from the corresponding *.c tests, and as such the diffs are large and
nasty. Look at the file rather than the diff.
Reviewers: dmgreen, miyuki, ostannard, simon_tatham
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71421
Summary:
This is a follow up on https://reviews.llvm.org/D61634#1742154 to turn the clang driver -fno-builtin flag into an IR attribute.
I also investigated pushing the attribute earlier on (in Sema) but it looks like this patch is simple and will cover all function calls.
Reviewers: aaron.ballman, courbet
Subscribers: cfe-commits, tejohnson
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71193
This is equivalent to the existing `import_name` and `import_module`
attributes which control the import names in the final wasm binary
produced by lld.
This maps the existing
This attribute currently requires a string rather than using the
symbol name for a couple of reasons:
1. Avoid confusion with static and dynamic linking which is
based on symbol name. Exporting a function from a wasm module using
this directive is orthogonal to both static and dynamic linking.
2. Avoids name mangling.
Differential Revision: https://reviews.llvm.org/D70520
Summary:
Attribute annotations are recorded in a special global composite variable
that points to annotation strings and the annotated objects.
As a restriction of the LLVM IR type system, those pointers are all
pointers to address space 0, so let's insert an addrspacecast when the
annotated global is in a non-0 address space.
Since this addrspacecast is only reachable from the global annotations
object, this should allow us to represent annotations on all globals
regardless of which addrspacecasts are usually legal for the target.
Reviewers: rjmccall
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71208
This adds the family of `vshlq_n` and `vshrq_n` ACLE intrinsics, which
shift every lane of a vector left or right by a compile-time
immediate. They mostly work by expanding to the IR `shl`, `lshr` and
`ashr` operations, with their second operand being a vector splat of
the immediate.
There's a fiddly special case, though. ACLE specifies that the
immediate in `vshrq_n` can take values up to //and including// the bit
size of the vector lane. But LLVM IR thinks that shifting right by the
full size of the lane is UB, and feels free to replace the `lshr` with
an `undef` half way through the optimization pipeline. Hence, to keep
this legal in source code, I have to detect it at codegen time.
Logical (unsigned) right shifts by the element size are handled by
simply emitting the zero vector; arithmetic ones are converted into a
shift of one bit less, which will always give the same output.
In order to do that check, I also had to enhance the tablegen
MveEmitter so that it can cope with converting a builtin function's
operand into a bare integer to pass to a code-generating subfunction.
Previously the only bare integers it knew how to handle were flags
generated from within `arm_mve.td`.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: dmgreen, MarkMurrayARM
Subscribers: echristo, hokein, rdhindsa, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71065
Change the IRBuilder and clang so that constrained FP intrinsics will be
emitted for builtins when appropriate. Only non-target-specific builtins
are affected in this patch.
Differential Revision: https://reviews.llvm.org/D70256
Summary:
This patch refactors instruction selection of the complex vector
addition, multiplication and multiply-add intrinsics, so that it is
now based on TableGen patterns rather than C++ code.
It also changes the first parameter (halving vs non-halving) of the
arm_mve_vcaddq IR intrinsic to match the corresponding instruction
encoding, hence it requires some changes in the tests.
The patch addresses David's comment in https://reviews.llvm.org/D71190
Reviewers: dmgreen, ostannard, simon_tatham, MarkMurrayARM
Reviewed By: dmgreen
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71245
Extern variable usage in BPF is different from traditional
pure user space application. Recent discussion in linux bpf
mailing list has two use cases where debug info types are
required to use extern variables:
- extern types are required to have a suitable interface
in libbpf (bpf loader) to provide kernel config parameters
to bpf programs.
https://lore.kernel.org/bpf/CAEf4BzYCNo5GeVGMhp3fhysQ=_axAf=23PtwaZs-yAyafmXC9g@mail.gmail.com/T/#t
- extern types are required so kernel bpf verifier can
verify program which uses external functions more precisely.
This will make later link with actual external function no
need to reverify.
https://lore.kernel.org/bpf/87eez4odqp.fsf@toke.dk/T/#m8d5c3e87ffe7f2764e02d722cb0d8cbc136880ed
This patch added clang support to emit debuginfo for extern variables
with a TargetInfo hook to enable it. The debuginfo for the
extern variable is emitted only if that extern variable is
referenced in the current compilation unit.
Currently, only BPF target enables to generate debug info for
extern variables. The emission of such debuginfo is disabled for C++
at this moment since BPF only supports a subset of C language.
Emission with C++ can be enabled later if an appropriate use case
is identified.
-fstandalone-debug permits us to see more debuginfo with the cost
of bloated binary size. This patch did not add emission of extern
variable debug info with -fstandalone-debug. This can be
re-evaluated if there is a real need.
Differential Revision: https://reviews.llvm.org/D70696
Summary:
It shouldn't promote half to double or any larger precision types for fp classification builtins.
Because fp classification builtins would get incorrect result with promoted argument.
For example, __builtin_isnormal with a subnormal half value should return false, but it is not.
That the subnormal half value is promoted to a normal double value.
Reviewers: aaron.ballman
Reviewed By: aaron.ballman
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71049
Summary:
This adds the family of `vshlq_n` and `vshrq_n` ACLE intrinsics, which
shift every lane of a vector left or right by a compile-time
immediate. They mostly work by expanding to the IR `shl`, `lshr` and
`ashr` operations, with their second operand being a vector splat of
the immediate.
There's a fiddly special case, though. ACLE specifies that the
immediate in `vshrq_n` can take values up to //and including// the bit
size of the vector lane. But LLVM IR thinks that shifting right by the
full size of the lane is UB, and feels free to replace the `lshr` with
an `undef` half way through the optimization pipeline. Hence, to keep
this legal in source code, I have to detect it at codegen time.
Logical (unsigned) right shifts by the element size are handled by
simply emitting the zero vector; arithmetic ones are converted into a
shift of one bit less, which will always give the same output.
In order to do that check, I also had to enhance the tablegen
MveEmitter so that it can cope with converting a builtin function's
operand into a bare integer to pass to a code-generating subfunction.
Previously the only bare integers it knew how to handle were flags
generated from within `arm_mve.td`.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71065
Summary:
This patch adds intrinsics for the following MVE instructions:
* VCADD, VHCADD
* VCMUL
* VCMLA
Each of the above 3 groups has a corresponding new LLVM IR intrinsic.
Reviewers: simon_tatham, MarkMurrayARM, ostannard, dmgreen
Reviewed By: MarkMurrayARM
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71190
The validateOutputSize and validateInputSize need to check whether
AVX or AVX512 are enabled. But this can be affected by the
target attribute so we need to factor that in.
This patch copies some of the code from CodeGen to create an
appropriate feature map that we can pass to the function. Probably
need some refactoring here to share more code with Codegen. Is
there a good place to do that? Also need to support the cpu_specific
attribute as well.
Differential Revision: https://reviews.llvm.org/D68627
Patch was reverted because https://bugs.llvm.org/show_bug.cgi?id=44048
The original patch is modified to set the strictfp IR attribute
explicitly in CodeGen instead of as a side effect of IRBuilder.
In the 2nd attempt to reapply there was a windows lit test fail, the
tests were fixed to use wildcard matching.
Differential Revision: https://reviews.llvm.org/D62731
The test is complaining on some of the builders. This attempts to
adjust the run line to be more line the others in the same folder, using
clang_cc1 as opposed to the driver.
Summary:
This commit adds the `vpselq` intrinsics which take an MVE predicate
word and select lanes from two vectors; the `vctp` intrinsics which
create a tail predicate word suitable for processing the first m
elements of a vector (e.g. in the last iteration of a loop); and
`vpnot`, which simply complements a predicate word and is just
syntactic sugar for the `~` operator.
The `vctp` ACLE intrinsics are lowered to the IR intrinsics we've
already added (and which D70592 just reorganized). I've filled in the
missing isel rule for VCTP64, and added another set of rules to
generate the predicated forms.
I needed one small tweak in MveEmitter to allow the `unpromoted` type
modifier to apply to predicates as well as integers, so that `vpnot`
doesn't pointlessly convert its input integer to an `<n x i1>` before
complementing it.
Reviewers: ostannard, MarkMurrayARM, dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70485
Summary:
Add support for vcadd_* family of intrinsics. This set of intrinsics is
available in Armv8.3-A.
The fp16 versions require the FP16 extension, which has been available
(opt-in) since Armv8.2-A.
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70862
Now Clang does not check that features required by built-in functions
are enabled. That causes errors in the backend reported in PR44018.
This patch fixes this bug by checking that required features
are enabled.
This should fix PR44018.
Differential Revision: https://reviews.llvm.org/D70808
Summary: Fix PR43700
The ConstantEmitter in AggExprEmitter::EmitArrayInit was initialized
with the CodeGenFunction set to null, which caused the crash.
Also simplify another call, and make the CGF member a const pointer
since it is public but only assigned in the constructor.
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D70302
Summary:
Implicit Conversion Sanitizer is *almost* feature complete.
There aren't *that* much unsanitized things left,
two major ones are increment/decrement (this patch) and bit fields.
As it was discussed in
[[ https://bugs.llvm.org/show_bug.cgi?id=39519 | PR39519 ]],
unlike `CompoundAssignOperator` (which is promoted internally),
or `BinaryOperator` (for which we always have promotion/demotion in AST)
or parts of `UnaryOperator` (we have promotion/demotion but only for
certain operations), for inc/dec, clang omits promotion/demotion
altogether, under as-if rule.
This is technically correct: https://rise4fun.com/Alive/zPgD
As it can be seen in `InstCombineCasts.cpp` `canEvaluateTruncated()`,
`add`/`sub`/`mul`/`and`/`or`/`xor` operators can all arbitrarily
be extended or truncated:
901cd3b3f6/llvm/lib/Transforms/InstCombine/InstCombineCasts.cpp (L1320-L1334)
But that has serious implications:
1. Since we no longer model implicit casts, do we pessimise
their AST representation and everything that uses it?
2. There is no demotion, so lossy demotion sanitizer does not trigger :]
Now, i'm not going to argue about the first problem here,
but the second one **needs** to be addressed. As it was stated
in the report, this is done intentionally, so changing
this in all modes would be considered a penalization/regression.
Which means, the sanitization-less codegen must not be altered.
It was also suggested to not change the sanitized codegen
to the one with demotion, but i quite strongly believe
that will not be the wise choice here:
1. One will need to re-engineer the check that the inc/dec was lossy
in terms of `@llvm.{u,s}{add,sub}.with.overflow` builtins
2. We will still need to compute the result we would lossily demote.
(i.e. the result of wide `add`ition/`sub`traction)
3. I suspect it would need to be done right here, in sanitization.
Which kinda defeats the point of
using `@llvm.{u,s}{add,sub}.with.overflow` builtins:
we'd have two `add`s with basically the same arguments,
one of which is used for check+error-less codepath and other one
for the error reporting. That seems worse than a single wide op+check.
4. OR, we would need to do that in the compiler-rt handler.
Which means we'll need a whole new handler.
But then what about the `CompoundAssignOperator`,
it would also be applicable for it.
So this also doesn't really seem like the right path to me.
5. At least X86 (but likely others) pessimizes all sub-`i32` operations
(due to partial register stalls), so even if we avoid promotion+demotion,
the computations will //likely// be performed in `i32` anyways.
So i'm not really seeing much benefit of
not doing the straight-forward thing.
While looking into this, i have noticed a few more LLVM middle-end
missed canonicalizations, and filed
[[ https://bugs.llvm.org/show_bug.cgi?id=44100 | PR44100 ]],
[[ https://bugs.llvm.org/show_bug.cgi?id=44102 | PR44102 ]].
Those are not specific to inc/dec, we also have them for
`CompoundAssignOperator`, and it can happen for normal arithmetics, too.
But if we take some other path in the patch, it will not be applicable
here, and we will have most likely played ourselves.
TLDR: front-end should emit canonical, easy-to-optimize yet
un-optimized code. It is middle-end's job to make it optimal.
I'm really hoping reviewers agree with my personal assessment
of the path this patch should take..
This originally landed in 9872ea4ed1
but got immediately reverted in cbfa237892
because the assertion was faulty. That fault ended up being caused
by the enum - while there will be promotion, both types are unsigned,
with same width. So we still don't need to sanitize non-signed cases.
So far. Maybe the assert will tell us this isn't so.
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=44054 | PR44054 ]].
Refs. https://github.com/google/sanitizers/issues/940
Reviewers: rjmccall, erichkeane, rsmith, vsk
Reviewed By: erichkeane
Subscribers: mehdi_amini, dexonsmith, cfe-commits, #sanitizers, llvm-commits, aaron.ballman, t.p.northover, efriedma, regehr
Tags: #llvm, #clang, #sanitizers
Differential Revision: https://reviews.llvm.org/D70539
The asssertion that was added does not hold,
breaks on test-suite/MultiSource/Applications/SPASS/analyze.c
Will reduce the testcase and revisit.
This reverts commit 9872ea4ed1, 870f3542d3.
This replaces the A32 NEON vqadds, vqaddu, vqsubs and vqsubu intrinsics
with the target independent sadd_sat, uadd_sat, ssub_sat and usub_sat.
This helps generate vqadds from standard IR nodes, which might be
produced from the vectoriser. The old variants are removed in the
process.
Differential Revision: https://reviews.llvm.org/D69350
Summary:
Implicit Conversion Sanitizer is *almost* feature complete.
There aren't *that* much unsanitized things left,
two major ones are increment/decrement (this patch) and bit fields.
As it was discussed in
[[ https://bugs.llvm.org/show_bug.cgi?id=39519 | PR39519 ]],
unlike `CompoundAssignOperator` (which is promoted internally),
or `BinaryOperator` (for which we always have promotion/demotion in AST)
or parts of `UnaryOperator` (we have promotion/demotion but only for
certain operations), for inc/dec, clang omits promotion/demotion
altogether, under as-if rule.
This is technically correct: https://rise4fun.com/Alive/zPgD
As it can be seen in `InstCombineCasts.cpp` `canEvaluateTruncated()`,
`add`/`sub`/`mul`/`and`/`or`/`xor` operators can all arbitrarily
be extended or truncated:
901cd3b3f6/llvm/lib/Transforms/InstCombine/InstCombineCasts.cpp (L1320-L1334)
But that has serious implications:
1. Since we no longer model implicit casts, do we pessimise
their AST representation and everything that uses it?
2. There is no demotion, so lossy demotion sanitizer does not trigger :]
Now, i'm not going to argue about the first problem here,
but the second one **needs** to be addressed. As it was stated
in the report, this is done intentionally, so changing
this in all modes would be considered a penalization/regression.
Which means, the sanitization-less codegen must not be altered.
It was also suggested to not change the sanitized codegen
to the one with demotion, but i quite strongly believe
that will not be the wise choice here:
1. One will need to re-engineer the check that the inc/dec was lossy
in terms of `@llvm.{u,s}{add,sub}.with.overflow` builtins
2. We will still need to compute the result we would lossily demote.
(i.e. the result of wide `add`ition/`sub`traction)
3. I suspect it would need to be done right here, in sanitization.
Which kinda defeats the point of
using `@llvm.{u,s}{add,sub}.with.overflow` builtins:
we'd have two `add`s with basically the same arguments,
one of which is used for check+error-less codepath and other one
for the error reporting. That seems worse than a single wide op+check.
4. OR, we would need to do that in the compiler-rt handler.
Which means we'll need a whole new handler.
But then what about the `CompoundAssignOperator`,
it would also be applicable for it.
So this also doesn't really seem like the right path to me.
5. At least X86 (but likely others) pessimizes all sub-`i32` operations
(due to partial register stalls), so even if we avoid promotion+demotion,
the computations will //likely// be performed in `i32` anyways.
So i'm not really seeing much benefit of
not doing the straight-forward thing.
While looking into this, i have noticed a few more LLVM middle-end
missed canonicalizations, and filed
[[ https://bugs.llvm.org/show_bug.cgi?id=44100 | PR44100 ]],
[[ https://bugs.llvm.org/show_bug.cgi?id=44102 | PR44102 ]].
Those are not specific to inc/dec, we also have them for
`CompoundAssignOperator`, and it can happen for normal arithmetics, too.
But if we take some other path in the patch, it will not be applicable
here, and we will have most likely played ourselves.
TLDR: front-end should emit canonical, easy-to-optimize yet
un-optimized code. It is middle-end's job to make it optimal.
I'm really hoping reviewers agree with my personal assessment
of the path this patch should take..
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=44054 | PR44054 ]].
Reviewers: rjmccall, erichkeane, rsmith, vsk
Reviewed By: erichkeane
Subscribers: mehdi_amini, dexonsmith, cfe-commits, #sanitizers, llvm-commits, aaron.ballman, t.p.northover, efriedma, regehr
Tags: #llvm, #clang, #sanitizers
Differential Revision: https://reviews.llvm.org/D70539
This reapplies: 8ff85ed905
Original commit message:
As a follow-up to my initial mail to llvm-dev here's a first pass at the O1 described there.
This change doesn't include any change to move from selection dag to fast isel
and that will come with other numbers that should help inform that decision.
There also haven't been any real debuggability studies with this pipeline yet,
this is just the initial start done so that people could see it and we could start
tweaking after.
Test updates: Outside of the newpm tests most of the updates are coming from either
optimization passes not run anymore (and without a compelling argument at the moment)
that were largely used for canonicalization in clang.
Original post:
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131494.html
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65410
This reverts commit c9ddb02659.
It is tricky to use replace_path_prefix correctly on Windows which uses
backslashes as native path separators. Switch back to the old approach
(startswith is not ideal) to appease build bots for now.
GCC 8 implements -fmacro-prefix-map. Like -fdebug-prefix-map, it replaces a string prefix for the __FILE__ macro.
-ffile-prefix-map is the union of -fdebug-prefix-map and -fmacro-prefix-map
Reviewed By: rnk, Lekensteyn, maskray
Differential Revision: https://reviews.llvm.org/D49466
The modifier system used to mutate types on NEON intrinsic definitions had a
separate letter for all kinds of transformations that might be needed, and we
were quite quickly running out of letters to use. This patch converts to a much
smaller set of orthogonal modifiers that can be applied together to achieve the
desired effect.
When merging with downstream it is likely to cause a conflict with any local
modifications to the .td files. There is a new script in
utils/convert_arm_neon.py that was used to convert all .td definitions and I
would suggest running it on the last downstream version of those files before
this commit rather than resolving conflicts manually.
The original version broke vcreate_* because it became a macro and didn't
apply the normal integer promotion rules before bitcasting to a vector.
This adds a temporary.
Fangrui Song