Move the entire optimization to one place. Before it was possible
to adjust dmask without changing the register class of the output
instruction, since they were done in separate places. Fix all
lane sizes and move all of the optimization into the DAG folding.
llvm-svn: 319705
GFX9 stopped using m0 for most DS instructions. Select
a different instruction without the use. I think this will
be less error prone than trying to manually maintain m0
uses as needed.
llvm-svn: 319270
Summary:
Kill the thread if operand 0 == false.
llvm.amdgcn.wqm.vote can be applied to the operand.
Also allow kill in all shader stages.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D38544
llvm-svn: 316427
opt-bisect/optnone disable the AMDGPUUniformAnnotateValues pass.
The heuristic in the custom selector for brcond deferred the
branch uniformity check to the pattern, which would fail.
llvm-svn: 315360
The hardware will only forward EXEC_LO; the high 32 bits will be zero.
Additionally, inline constants do not work. At least,
v_addc_u32_e64 v0, vcc, v0, v1, -1
which could conceivably be used to combine (v0 + v1 + 1) into a single
instruction, acts as if all carry-in bits are zero.
The llvm.amdgcn.ps.live test is adjusted; it would be nice to combine
s_mov_b64 s[0:1], exec
v_cndmask_b32_e64 v0, v1, v2, s[0:1]
into
v_mov_b32 v0, v3
but it's not particularly high priority.
Fixes dEQP-GLES31.functional.shaders.helper_invocation.value.*
llvm-svn: 314522
A mrt exp with vm=1 must be in exact (non-WQM) mode, as it also exports
the exec mask as the valid mask to determine which pixels to render.
This commit marks any exp as needing to be in exact mode.
Actually, if there are multiple mrt exps, only one needs to have vm=1,
and only that one needs to be in exact mode. But that is an optimization
for another day.
Differential Revision: https://reviews.llvm.org/D36305
llvm-svn: 312915
These aren't really packed instructions, so the default
op_sel_hi should be 0 since this indicates a conversion.
The operand types are scalar values that behave similar
to an f16 scalar that may be converted to f32.
Doesn't change the default printing for op_sel_hi, just
the parsing.
llvm-svn: 312179
Summary:
All instructions with the DPP modifier may not write to certain lanes of
the output if bound_ctrl=1 is set or any bits in bank_mask or row_mask
aren't set, so the destination register may be both defined and modified.
The right way to handle this is to add a constraint that the destination
register is the same as one of the inputs. We could tie the destination
to the first source, but that would be too restrictive for some use-cases
where we want the destination to be some other value before the
instruction executes. Instead, add a fake "old" source and tie it to the
destination. Effectively, the "old" source defines what value unwritten
lanes will get. We'll expose this functionality to users with a new
intrinsic later.
Also, we want to use DPP instructions for computing derivatives, which
means we need to set WQM for them. We also need to enable the entire
wavefront when using DPP intrinsics to implement nonuniform subgroup
reductions, since otherwise we'll get incorrect results in some cases.
To accomodate this, add a new operand to all DPP instructions which will
be interpreted by the SI WQM pass. This will be exposed with a new
intrinsic later. We'll also add support for Whole Wavefront Mode later.
I also fixed llvm.amdgcn.mov.dpp to overwrite the source and fixed up
the test. However, I could also keep the old behavior (where lanes that
aren't written are undefined) if people want it.
Reviewers: tstellar, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D34716
llvm-svn: 310283
Summary:
Previously, CodeGen checked first src operand type to determine if omod is supported by instruction. This isn't correct for some instructions: e.g. V_CMP_EQ_F32 has floating-point src operands but desn't support omod.
Changed .td files to check if dst operand instead of src operand.
Reviewers: arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D35350
llvm-svn: 308179
Intrinsic already existed for llvm.SI.tbuffer.store
Needed tbuffer.load and also re-implementing the intrinsic as llvm.amdgcn.tbuffer.*
Added CodeGen tests for the 2 new variants added.
Left the original llvm.SI.tbuffer.store implementation to avoid issues with existing code
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, tpr
Differential Revision: https://reviews.llvm.org/D30687
llvm-svn: 306031
Summary: Previously there were two separate pseudo instruction for SDWA on VI and on GFX9. Created one pseudo instruction that is union of both of them. Added verifier to check that operands conform either VI or GFX9.
Reviewers: dp, arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, artem.tamazov
Differential Revision: https://reviews.llvm.org/D34026
llvm-svn: 305886
Summary:
Added separate pseudo and real instruction for GFX9 SDWA instructions.
Currently supports only in assembler.
Depends D32493
Reviewers: vpykhtin, artem.tamazov
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D33132
llvm-svn: 303620
Enabled clamp and omod for v_cvt_* opcodes which have src0 of an integer type
Reviewers: vpykhtin, arsenm
Differential Revision: https://reviews.llvm.org/D31327
llvm-svn: 298852
As we introduced target triple environment amdgiz and amdgizcl, the address
space values are no longer enums. We have to decide the value by target triple.
The basic idea is to use struct AMDGPUAS to represent address space values.
For address space values which are not depend on target triple, use static
const members, so that they don't occupy extra memory space and is equivalent
to a compile time constant.
Since the struct is lightweight and cheap, it can be created on the fly at
the point of usage. Or it can be added as member to a pass and created at
the beginning of the run* function.
Differential Revision: https://reviews.llvm.org/D31284
llvm-svn: 298846
Summary:
First iteration of SDWA peephole.
This pass tries to combine several instruction into one SDWA instruction. E.g. it converts:
'''
V_LSHRREV_B32_e32 %vreg0, 16, %vreg1
V_ADD_I32_e32 %vreg2, %vreg0, %vreg3
V_LSHLREV_B32_e32 %vreg4, 16, %vreg2
'''
Into:
'''
V_ADD_I32_sdwa %vreg4, %vreg1, %vreg3 dst_sel:WORD_1 dst_unused:UNUSED_PAD src0_sel:WORD_1 src1_sel:DWORD
'''
Pass structure:
1. Iterate over machine instruction in basic block and try to apply "SDWA patterns" to each of them. SDWA patterns match machine instruction into either source or destination SDWA operand. E.g. ''' V_LSHRREV_B32_e32 %vreg0, 16, %vreg1''' is matched to source SDWA operand '''%vreg1 src_sel:WORD_1'''.
2. Iterate over found SDWA operands and find instruction that could be potentially coverted into SDWA. E.g. for source SDWA operand potential instruction are all instruction in this basic block that uses '''%vreg0'''
3. Iterate over all potential instructions and check if they can be converted into SDWA.
4. Convert instructions to SDWA.
This review contains basic implementation of SDWA peephole pass. This pass requires additional testing fot both correctness and performance (no performance testing done).
There are several ways this pass can be improved:
1. Make this pass work on whole function not only basic block. As I can see this can be done right now without changes to pass.
2. Introduce more SDWA patterns
3. Introduce mnemonics to limit when SDWA patterns should apply
Reviewers: vpykhtin, alex-t, arsenm, rampitec
Subscribers: wdng, nhaehnle, mgorny
Differential Revision: https://reviews.llvm.org/D30038
llvm-svn: 298365
The manual is unclear on the details of this. It's not
clear to me if denormals are not allowed with clamp,
or if that is only omod. Not allowing denorms for
fp16 or fp64 isn't useful so I also question if that
is really a restriction. Same with whether this is valid
without IEEE mode enabled.
llvm-svn: 295905
Change implementation to use max instead of add.
min/max/med3 do not flush denormals regardless of the mode,
so it is OK to use it whether or not they are enabled.
Also allow using clamp with f16, and use knowledge
of dx10_clamp.
llvm-svn: 295788
The operand types were defined to fit the fp16_to_fp node, which
has the half as an integer type. v_cvt_f32_f16 does support
source modifiers, so change this to have an FP type and modifiers.
For targets without legal f16, this requires recognizing the
bit operations and trying to produce them.
llvm-svn: 293857
Dmitry Preobrazhensky