Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
The IntrNoMem, IntrReadMem, IntrWriteMem, and IntrArgMemOnly intrinsic
properties differ from their corresponding LLVM IR attributes by specifying
that the intrinsic, in addition to its memory properties, has no other side
effects.
The IntrHasSideEffects flag used in combination with one of the memory flags
listed above, makes it possible to define an intrinsic such that its
properties at the CodeGen layer match its properties at the IR layer.
Patch by Tom Stellard
llvm-svn: 301685
Summary:
It functions just like RegisterClass except that the class is obtained
from a field.
Depends on D31761.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32229
llvm-svn: 301080
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
canMutate() was returning true when the operands were all in the same order as
the matched instruction. However, it wasn't checking the operands were actually
on that instruction. This worked when we could only match a single instruction
but the addition of nested instruction matching led to cases where the operands
could be split across multiple instructions. canMutate() now returns false if
operands belong to instructions other than the root of the match.
llvm-svn: 301077
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300993
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
llvm-svn: 300978
This should fix llvm-clang-x86_64-expensive-checks-win
I reproduced the error using the following code:
namespace llvm {
// Moving this out of the llvm namespace fixes the error.
template<unsigned NumBits> class PredicateBitsetImpl {};
}
namespace {
const unsigned MAX_SUBTARGET_PREDICATES = 11;
// This works on Clang but is broken on MSVC
// using PredicateBitset = PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
// Some versions emit a syntax error here ("error C2061: syntax error: identifier
// 'PredicateBitsetImpl'") but others accept it and only emit the C3646 below.
//
// This works on Clang and MSVC
using PredicateBitset = llvm::PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
class Foo {
private:
PredicateBitset A; // error C3646: 'A': unknown override specifier
};
}
llvm-svn: 300970
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300964
Adds scalable vector machine value types, and updates
the switch statements required for tablegen.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D32018
llvm-svn: 300840
Patch by Ettore Speziale
Allow TableGen to generate static functions to perform GCC/MS builtin name to
target specific intrinsic ID mapping.
https://reviews.llvm.org/D31150
llvm-svn: 300735
Summary:
As far as instruction selection is concerned, all three appear to be same thing.
Support for these operands is experimental since AArch64 doesn't make use
of them and the in-tree targets that do use them (AMDGPU for
OperandWithDefaultOps, AMDGPU/ARM/Hexagon/Lanai for PredicateOperand, and ARM
for OperandWithDefaultOps) are not using tablegen-erated GlobalISel yet.
Reviewers: rovka, aditya_nandakumar, t.p.northover, qcolombet, ab
Reviewed By: rovka
Subscribers: inglorion, aemerson, rengolin, mehdi_amini, dberris, kristof.beyls, igorb, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D31135
llvm-svn: 300037
Summary:
Temporaries are now allocated to operands instead of predicates and this
allocation is used to correctly pair up the rendered operands with the
matched operands.
Previously, ComplexPatterns were allocated temporaries independently in the
Src Pattern and Dst Pattern, leading to mismatches. Additionally, the Dst
Pattern failed to account for the allocated index and therefore always used
temporary 0, 1, ... when it should have used base+0, base+1, ...
Thanks to Aditya Nandakumar for noticing the bug.
Depends on D30539
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D31054
llvm-svn: 299538
Fix other cases of 'const StringRef' creeping back in at the same time.
This should fix the llvm-clang-x86_64-expensive-checks-win buildbot.
llvm-svn: 299433
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
Functions that still return Expected<X> are now called createAndImport*()
Changing the return type was requested in the review comments for r299001
llvm-svn: 299063
Summary:
But don't actually inspect the tree any deeper than we already do. This
change is NFC but the next one will enable full traversal of the
source/destination patterns.
Depends on D30535
Reviewers: t.p.northover, qcolombet, aditya_nandakumar, rovka, ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30536
llvm-svn: 299001
This patch enables schedulers to specify instructions that
cannot be issued with any other instructions.
It also fixes BeginGroup/EndGroup.
Reviewed by: Andrew Trick
Differential Revision: https://reviews.llvm.org/D30744
llvm-svn: 298885
When using -debug with -gen-register-info, tablegen will crash when
trying to print a name of a non-native register unit. This patch only
affects the debug information generated while running llvm-tblgen,
and has no impact on the compilable code coming out of it.
llvm-svn: 298875
Summary:
The categories are emitted in a strange order in this patch due to a bug in the
CommandLine library.
Reviewers: ab
Reviewed By: ab
Subscribers: ab, llvm-commits
Differential Revision: https://reviews.llvm.org/D30995
llvm-svn: 298843
Do not force the backends to use target name as namespace.
Original patch by Mattias Eriksson
Reviewers: stoklund, craig.topper
Reviewed By: stoklund
Subscribers: materi, llvm-commits
Differential Revision: https://reviews.llvm.org/D31322
llvm-svn: 298834
This is another step towards implementing register classes with
parametrized register/spill sizes and value types.
This is an updated version of r298652. The difference is that MCRegister-
Class still contains register size, available as getPhysRegSize(). The
old function getSize was retained as a temporary measure to avoid build
breakage for out-of-tree targets.
llvm-svn: 298739
This is another step towards implementing register classes with
parametrized register/spill sizes.
Differential Revision: https://reviews.llvm.org/D31299
llvm-svn: 298652
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
These are needed due to some obscure rules in the standard
about how std::vector selects between copy and move
constructors, which can cause a conforming implementation
to attempt to select the copy constructor of RuleMatcher,
which will fail since std::unique_ptr<> isn't copyable.
llvm-svn: 298294
Summary:
Prepare the way for nested instruction matching support by having actions
like CopyRenderer look up operands in the RuleMatcher rather than a
specific InstructionMatcher. This allows actions to reference any operand
from any matched instruction.
It works by checking the 'shape' of the match and capturing
each matched instruction to a local variable. If the shape is wrong
(not enough operands, leaf nodes where non-leafs are expected, etc.), then
the rule exits early without checking the predicates. Once we've captured
the instructions, we then test the predicates as before (except using the
local variables). If the match is successful, then we render the new
instruction as before using the local variables.
It's not noticable in this patch but by the time we support multiple
instruction matching, this patch will also cause a significant improvement
to readability of the emitted code since
MRI.getVRegDef(I->getOperand(0).getReg()) will simply be MI1 after
emitCxxCaptureStmts().
This isn't quite NFC because I've also fixed a bug that I'm surprised we
haven't encountered yet. It now checks there are at least the expected
number of operands before accessing them with getOperand().
Depends on D30531
Reviewers: t.p.northover, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: rovka
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30535
llvm-svn: 298257
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Currently we don't enforce that ISD::ANY_EXTEND, ZERO_EXTEND, SIGN_EXTEND, TRUNC, FP_ROUND, FP_EXTEND have the same number of elements(including scalar) between their input and output. Though we have them documented as such. Up until a few months ago x86 created nodes that violated this rule. That's all been fixed now, and we should enforce the rule going forward.
In order to do this we need to allow SDTCisSameNumEltsAs to support scalar types and not enforce being a vector. If one type is scalar we will force the other type to also be scalar.
Differential Revision: https://reviews.llvm.org/D30878
llvm-svn: 297648
There were some issues in the implementation of enumerate()
preventing it from being used in various contexts. These were
all related to the fact that it did not supporter llvm's
iterator_facade_base class. So this patch adds support for that
and additionally exposes a new helper method to_vector() that
will evaluate an entire range and store the results in a
vector.
Differential Revision: https://reviews.llvm.org/D30853
llvm-svn: 297633
This reverts r297596.
There were other issues that were making this not work that have been fixed now. Reverting this results in a more accurate table.
llvm-svn: 297602
This exposed that we have several intrinsic instructions that have identical TSFlags to other instructions. We should merge their patterns and kill of the duplicate. I'll fix that in a follow up patch.
llvm-svn: 297596
SelectCode has been returning nullptr since 182dac0 ("SDAG: Make
SelectCodeCommon return void", 2016-05-10). Make SelectCode also
return void instead, as all callers have been updated.
Patch by Sven van Haastregt.
Review: https://reviews.llvm.org/D30497
llvm-svn: 297377
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
Daniel Sanders