Now that our support for PDB emission is reasonably good, there is
no longer a need to emit a COFF symbol table.
Also fix a bug where we would fail to emit a string table for long
section names if /debug was not specified.
Differential Revision: https://reviews.llvm.org/D40189
llvm-svn: 318548
Summary:
Many small functions have identical unwind info because they push the
same sets of CSRs in the same order and have the same stack and prologue
size. The VC linker merges duplicate .xdata, and so should LLD.
This reduces the .xdata section size of clang.exe from 1.8MB to 94KB.
Reviewers: pcc, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40160
llvm-svn: 318547
Sections that will be mapped at runtime will only have the short
section name available, since the string table it points into isn't
mapped. Therefore prefer truncating those names over writing a
long name that is unavailable at runtime.
This allows libunwind to find the .eh_frame section at runtime even
if the module was built with debug info enabled.
Differential Revision: https://reviews.llvm.org/D40025
llvm-svn: 318391
If -opt:noref is specified, they can end up with isLive() == 1
when the autoexport check is run.
To reduce the risk of potential issues, only consider exporting
DefinedRegular and DefinedCommon, nothing else.
Differential Revision: https://reviews.llvm.org/D40014
llvm-svn: 318384
Summary:
We previously assumed that all SafeSEH handlers are
DefinedRegular symbols. This is not the case for handlers defined in
DLLs. As a result, we were failing to emit entries in the SafeSEH
table for those handlers. This change fixes that.
Fixes PR35324.
Reviewers: rnk, ruiu
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40102
llvm-svn: 318364
Even if we don't actually write any string table contents, the
4 byte size for the string table will always be written. Make
sure we accommodate for this in the file size. Since this size
is aligned up, this would seldom be an issue in practice.
Differential Revision: https://reviews.llvm.org/D39891
llvm-svn: 318284
For GC roots, add a bit to SymbolBody to ensure that we don't add the
same root twice, and switch to a vector. In addition to being faster,
this may also fix some latent non-determinism. We iterate the GCRoot
list later and it the order should be deterministic.
For fixupExports, we can just use DenseMap. This is a simple string
uniquing task, and we don't iterate the map.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39609
llvm-svn: 318072
ICF and GC impair debugging, so MSVC disables these optimizations when
/debug is passed. They are still on by default when no PDB is produced.
This change also makes /opt:ref enable ICF, which is consistent with
MSVC: https://msdn.microsoft.com/en-us/library/bxwfs976.aspx
We should consider making /opt:icf fold readonly data in the near
future. LLD used to do this, but we disabled it because it breaks too
many programs. MSVC only does this if the user explicitly passes
/opt:icf.
Reviewers: ruiu, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39885
llvm-svn: 318071
I never ran into this until lld-link started enabling debug output
by default for the mingw mode. I haven't been able to verify that
this actually behaves correctly, but this relocation is handled
identically on all other architectures so far.
Differential Revision: https://reviews.llvm.org/D39754
llvm-svn: 317669
Summary:
__safe_se_handler_base should be either absolute 0 (when no SafeSEH
table is present), or relative to the image base (when the table is
present). An earlier change inadvertedly made the symbol absolute in
both cases, leading to the SafeSEH table not being locatble at run
time. This change fixes that and updates the safeseh test to check for
the presence of the relocation.
Reviewers: rnk, ruiu
Reviewed By: ruiu
Subscribers: ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D39765
llvm-svn: 317635
These libraries contain a number of object files with compat wrappers,
in addition to the normal import library entries.
Differential Revision: https://reviews.llvm.org/D39684
llvm-svn: 317505
Now that we have only SymbolBody as the symbol class. So, "SymbolBody"
is a bit strange name now. This is a mechanical change generated by
perl -i -pe s/SymbolBody/Symbol/g $(git grep -l SymbolBody lld/ELF lld/COFF)
nd clang-format-diff.
Differential Revision: https://reviews.llvm.org/D39459
llvm-svn: 317370
This patch resurrects code that was removed in r317007 to not access
beyond allocated memory for a symbol.
Differential Revision: https://reviews.llvm.org/D39458
llvm-svn: 317039
IIUC, SizeOfImage is the distance from the end of the last section to
the image base, rounded up to the page size. So the previous code is
wrong.
Should fix https://bugs.llvm.org/show_bug.cgi?id=34949
(It is nice to know that lld is already being used to create Putty
distribution binaries.)
llvm-svn: 316626
Summary:
The COFF linker and the ELF linker have long had similar but separate
Error.h and Error.cpp files to implement error handling. This change
introduces new error handling code in Common/ErrorHandler.h, changes the
COFF and ELF linkers to use it, and removes the old, separate
implementations.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: smeenai, jyknight, emaste, sdardis, nemanjai, nhaehnle, mgorny, javed.absar, kbarton, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D39259
llvm-svn: 316624
If /manifest:embed is enabled we're already creating a resource file
out of these flags and adding it to the linkrepro, and it doesn't
seem worth being able to repro side-by-side manifests.
Includes a test that covers this commit as well as r315948.
Differential Revision: https://reviews.llvm.org/D38975
llvm-svn: 316547
link.exe supports this option to convert warnings into errors, and it's
useful to support in LLD as well.
Differential Revision: https://reviews.llvm.org/D39148
llvm-svn: 316502
LLD's handling of boolean flags is suboptimal:
* All boolean flags have a corresponding `:no` flag to turn the flag
off, and the linker should scan for both the non-suffixed and suffixed
flags (and the last one should win), but right now it only scans for
either the suffixed or non-suffixed flag (depending on the default
flag value).
* The `B` multiclass only allows specifying help text for the suffixed
(`:no`) flag, but for some flags (e.g. `/appcontainer`) the help text
should be associated with the non-suffixed flag instead.
Extend the `B` multiclass to have help text for both non-suffixed and
suffixed flag variants, and alter the existing help text accordingly in
some cases. Scan for both the non-suffixed and suffixed variants in the
driver and set config values accordingly.
This should mostly have no behavior change, apart from the added help
text and the modified argument scanning. Some flags are handled slightly
differently now, however; for example, LLD would previously always treat
64-bit images as large address aware, whereas `/largeaddressaware:no` is
now respected for 64-bit images (which is also how link.exe behaves).
Differential Revision: https://reviews.llvm.org/D39216
llvm-svn: 316501
The type index is from the TPI stream, not the IPI stream. Fix the
dumper, fix type index discovery, and add a test in LLD.
Also improve the log message we emit when we fail to rewrite type
indices in LLD. That's how I found this bug.
llvm-svn: 316461
Previously, the COFF driver would call exit(0) when called
as a library. Now it takes `ExitEarly` option, and if it
is false, it doesn't exit. So it is now more library-friendly.
Furthermore, link() calls freeArena() before returning, to
clean up resources.
Based on an Andrew Kelley's patch.
Differential Revision: https://reviews.llvm.org/D39202
llvm-svn: 316370
This fixes exporting functions in the following cases:
- functions starting with an underscore in def files
- functions starting with an underscore, via dllexport attributes, for mingw
- fastcall and vectorcall functions when declared undecorated in def files
- vectorcall functions when declared decorated in def files
- stdcall functions when declared decorated in def files for mingw
This still exports the stdcall functions with the wrong name
in the normal msvc/link.exe mode, if declared with decoration in
the def file though (this is not a regression though). Exporting
functions via def files including decoration is not something I
believe is routinely done though, but is tested to try to match
link.exe's behaviour as far as easily possible.
Differential Revision: https://reviews.llvm.org/D39170
llvm-svn: 316317
This should fix the build after SVN r316178, which worked fine
on GCC 5.4, but failed on clang with errors like these:
MinGW.h:26:3: error: too few template arguments for class template 'StringSet'
StringSet<> ExcludeSymbols;
^
lld/Common/LLVM.h:28:30: note: template is declared here
template<typename T> class StringSet;
Don't forward declare and add the using directive in the main
lld/Common/LLVM.h header, but just qualify the class name
in MinGW.h instead.
llvm-svn: 316180
Now that we have our own implementation of cvtres, we can add resource
files directly to the linkrepro.
Differential Revision: https://reviews.llvm.org/D38974
llvm-svn: 315954
Without this, /linkrepro would create an invalid tar file.
No tests because this requires Windows and the linkrepro tests
require not-Windows.
Differential Revision: https://reviews.llvm.org/D38973
llvm-svn: 315948
GNU ld automatically exports all symbols if no symbols have
been chosen to export via either def files or dllexport attributes.
The same behaviour can also be enabled via the GNU ld option
--export-all-symbols, in case some symbols are marked for export
via a def file or dllexport attribute.
The list of excluded symbols is from GNU ld, minus the
cygwin specific symbols.
Also add support for outputting the actual list of exported
symbols in a def file, as in the GNU ld option --output-def.
These options in GNU ld are documented in
https://sourceware.org/binutils/docs/ld/WIN32.html.
This currently exports all symbols from object files pulled in
from libmingw32 and libmingwex and other static libraries
that are linked in.
Differential Revision: https://reviews.llvm.org/D38760
llvm-svn: 315562
This is implemented in the same way as the other ADDR32NB relocations
for ARM and X64.
Differential Revision: https://reviews.llvm.org/D38815
llvm-svn: 315561
Fixes PR34306.
This is because it usually results in more compact code, and because
there are also known code generation bugs when using the PIC model
(see bug).
Based on a patch by Carlo Kok.
Differential Revision: https://reviews.llvm.org/D38769
llvm-svn: 315400
I believe the reason why we used warn() instead of error() to report
undefined symbols is because the older implementation of error() exitted
immediately. Here, we want to find as many undefined symbols as we can,
so I chose to use warn() instead of error().
Now error() does not exit immediately, so it doesn't make sense to keep
them as warnings.
Differential Revision: https://reviews.llvm.org/D38652
llvm-svn: 315131
New lld's files are spread under lib subdirectory, and it isn't easy
to find which files are actually maintained. This patch moves maintained
files to Common subdirectory.
Differential Revision: https://reviews.llvm.org/D37645
llvm-svn: 314719
Computing section content hashes early seems like a win in terms of
performance. It increases a chance that two different sections will get
different class IDs from the beginning.
Without threads, this patch improves Chromium link time by about 0.3
seconds. With threads, by 0.1 seconds. That's less than 1% time saving
but not bad for a small patch.
llvm-svn: 314644
According to Microsoft's PE/COFF documentation, a SECREL relocation is
"The 32-bit offset of the target from the beginning of its section". By
my reading, the "from the beginning of its section" implies that the
offset is unsigned.
Change from an assertion to an error, since it's possible to trigger
this condition normally for input files with very large sections, and we
should fail gracefully for those instead of asserting.
Differential Revision: https://reviews.llvm.org/D38020
llvm-svn: 313703
Sections are limited to 4 GiB. Error out early if a section exceeds this
size, rather than overflowing the section size and getting confusing
assertion failures/segfaults later.
Differential Revision: https://reviews.llvm.org/D38005
llvm-svn: 313699
r303378 was submitted because r303374 (Merge IAT and ILT) made lld's
output incompatible with the Binding feature. Now that r303374 was
reverted, we do not need to keep this change.
Pointed out by pcc.
llvm-svn: 313414
Arg instances can be claimed. After claimed, its `isClaimed` function
returns true. We do not use that notion in lld, so using NoClaim
versions of functions is just confusing. This patch is to just use
hasArg instead of hasArgNoClaim.
llvm-svn: 313187
In MinGW configurations (GCC, or clang with a *-windows-gnu target),
the -export directives in the object file contains the undecorated
symbol name, while it is decorated in MSVC configurations. (On the
command line, link.exe takes an undecorated symbol name for the
-export argument though.)
Differential Revision: https://reviews.llvm.org/D37772
llvm-svn: 313174
/natvis is a new command line option introduced by MSVC 2017.
We eventually have to support it, but for now, let's ignore it so that
we can at least link stuff instead of printing out an error.
Patch by Michael Rickert.
llvm-svn: 312966
Summary:
Previous would throw warning whenever libxml2 is not installed. Now
only give this warning if merging manifest fails.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37240
llvm-svn: 312604
Looks like raw_string_ostream is buffered. If we do not call `flush`
nor `str`, it is not guaranteed that a result string has all characters
that were written to it.
It wasn't failing on buildbots, but I could reproduce the issue on my
Windows workstation.
llvm-svn: 312577
Apply the simplification suggestions that Peter Collingbourne made
during the review at D37368. The returned thunk is cast to the
appropriate type in the SymbolTable, and the constant symbol's body is
not needed directly, so avoid the assignment. NFC
llvm-svn: 312391
If a symbol is locally defined and is DLL imported in another
translation unit, and the object with the locally defined version is
loaded prior to the imported version, then the linker will fail to
resolve the definition of the thunk and return the locally defined
symbol. This will then be attempted to be cast to an import thunk,
which will clearly fail.
Only return the thunk if the symbol is inserted or a thunk is created.
Otherwise, report a duplication error.
llvm-svn: 312386
writeArchive returned a pair, but the first element of the pair is always
its first argument on failure, so it doesn't make sense to return it from
the function. This patch change the return type so that it does't return it.
Differential Revision: https://reviews.llvm.org/D37313
llvm-svn: 312177
This reverts commit r312171 because it is pointed out that that's not a
correct fix (see https://bugs.llvm.org/show_bug.cgi?id=32674#c14) and
also because it broke buildbots.
llvm-svn: 312174
MSVC link.exe supports nested static libraries. That is, an .a file can
contain other .a file as its member. It is reported that MySQL actually
depends on this feature.
Fixes https://bugs.llvm.org/show_bug.cgi?id=32674
llvm-svn: 312171
Various classes have `Symtab` member variables even though we have
lld::coff::Symtab variable because previous attempts to make COFF lld's
internal structure resemble to ELF's was incomplete. This patch finishes
that job by removing member variables.
llvm-svn: 311938
Summary:
ArgParser created an instance of COFFOptTable on stack to use it to
parser command line arguments. Parsed arguments were then returned from
the function as InputArgList. This was safe because InputArgList referred
only statically-allocated InfoTable.
That is not a safe assumption after https://reviews.llvm.org/D36782,
which changes the type of its internal table from ArrayRef to std::vector.
To make lld work with that patch, we need to keep an instance of
COFFOptTable at least as long as an InputArgList is alive. This patch
does that.
Reviewers: yamaguchi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37217
llvm-svn: 311930
Summary: Now that the llvm-mt manifest merging libraries are complete, we may use them to merge manifests instead of needing to shell out to mt.exe.
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D36255
llvm-svn: 311424
When creating an import library from lld, the cases with
Name != ExtName shouldn't end up as a weak alias, but as a real
export of the new name, which is what actually is exported from
the DLL.
This restores the behaviour of renamed exports to what it was in
4.0.
Differential Revision: https://reviews.llvm.org/D36634
llvm-svn: 310992
Since SVN r303491 and r304573, LLD used the COFFImportLibrary
functions from LLVM. These only had two names, Name and ExtName,
which wasn't enough to convey all the details of stdcall functions.
Stdcall functions got the wrong symbol name in the import library
itself in r303491, which is why it was reverted in r304561. When
re-landed and fixed in r304573 (after adding a test in r304572),
the symbol name itself in the import library ended up right, but the
name type of the import library entry was wrong.
This had the effect that linking to the import library succeeded
(contrary to in r303491, where linking to such an import library
failed), but at runtime, the symbol wouldn't be found in the DLL
(since the caller linked to the stdcall decorated name).
Differential Revision: https://reviews.llvm.org/D36545
llvm-svn: 310989
I'm explicitly ignoring the warning by casting to void instead of
deleting the local assignment, because it's confusing to see a
function that fails when its return value evaluates to true.
But when you see that it's a std::error_code, it makes more sense.
llvm-svn: 310965
Previously, our algorithm to compute a build id involved hashing the
executable and storing that as the GUID in the CV Debug Record chunk,
and setting the age to 1.
This breaks down in one very obvious case: a user adds some newlines to
a file, rebuilds, but changes nothing else. This causes new line
information and new file checksums to get written to the PDB, meaning
that the debug info is different, but the generated code would be the
same, so we would write the same build over again with an age of 1.
Anyone using a symbol cache would have a problem now, because the
debugger would open the executable, look at the age and guid, find a
matching PDB in the symbol cache and then load it. It would never copy
the new PDB to the symbol cache.
This patch implements the canonical Windows algorithm for updating
a build id, which is to check the existing executable first, and
re-use an existing GUID while bumping the age if it already
exists.
Differential Revision: https://reviews.llvm.org/D36758
llvm-svn: 310961
These are emitted for comm symbols in object files, when targeting
a GNU environment.
Alternatively, just ignore them since we already align CommonChunk
to the natural size of the content (up to 32 bytes). That would only
trade away the possibility to overalign small symbols, which doesn't
sound like something that might not need to be handled?
Differential Revision: https://reviews.llvm.org/D36304
llvm-svn: 310871
We don't have the right algorithm for copying S_UDT symbols
from object files to the globals stream, and having it wrong
is worse than not having it at all, since it breaks display
of local variables of UDT types (for example, "dv Foo" fails
in our current implementation, but succeeds if the S_UDT records
are omitted). Omit them until we fix the algorithm.
llvm-svn: 310867
The linker module contains a symbol of type S_COMPILE3 which
contains various information about the compiler and linker used
to create the PDB, such as the name of the linker, the target
machine, and the linker version. Interestingly, if we set the
version string to 0.0.0.0, then when trying to view local
variables WinDbg emits an error that private symbols are not
present. By setting this to a valid MSVC linker version string,
local variables can display.
As such, even though it is not representative of LLVM's version
information, we need this for compatibility.
llvm-svn: 310755
PDBs need to contain 1 module for each object file/compiland,
and a special one synthesized by the linker. This one contains
a symbol record for each output section in the executable with
its address information. This patch adds such symbols to the
linker module. Note that we also are supposed to add an
S_COFFGROUP symbol for what appears to be each input section that
contributes to each output section, but it's not entirely clear
how to generate these yet, so I'm leaving that for a separate
patch.
llvm-svn: 310754
Previously we were writing an empty globals stream. Windows
tools interpret this as "private symbols are not present in
this PDB", even when they are, so we need to fix this. Regardless,
without it we don't have information about global variables, so
we need to fix it anyway. This patch does that.
With this patch, the "lm" command in WinDbg correctly reports
that we have private symbols available, but the "dv" command
still refuses to display local variables.
Differential Revision: https://reviews.llvm.org/D36535
llvm-svn: 310743
The publics stream and globals stream are very similar. They both
contain a list of hash buckets that refer into a single shared stream,
the symbol record stream. Because of the need for each builder to manage
both an independent hash stream as well as a single shared record
stream, making the two builders be independent entities is not the right
design. This patch merges them into a single class, of which only a
single instance is needed to create all 3 streams. PublicsStreamBuilder
and GlobalsStreamBuilder are now merged into the single GSIStreamBuilder
class, which writes all 3 streams at once.
Note that this patch does not contain any functionality change. So we're
still not yet writing any records to the globals stream. All we're doing
is making it so that when we do start writing records to the globals,
this refactor won't have to be part of that patch.
Differential Revision: https://reviews.llvm.org/D36489
llvm-svn: 310438
The compiler outputs PROC32_ID symbols into the object files
for functions, and these symbols have an embedded type index
which, when copied to the PDB, refer to the IPI stream. However,
the symbols themselves are also converted into regular symbols
(e.g. S_GPROC32_ID -> S_GPROC32), and type indices in the regular
symbol records refer to the TPI stream. So this patch applies
two fixes to function records.
1. It converts ID symbols to the proper non-ID record type.
2. After remapping the type index from the object file's index
space to the PDB file/IPI stream's index space, it then
remaps that index to the TPI stream's index space by.
Besides functions, during the remapping process we were also
discarding symbol record types which we did not recognize.
In particular, we were discarding S_BPREL32 records, which is
what MSVC uses to describe local variables on the stack. So
this patch fixes that as well by copying them to the PDB.
Differential Revision: https://reviews.llvm.org/D36426
llvm-svn: 310394
Summary:
PDB section contributions are supposed to use output section indices and
offsets, not input section indices and offsets.
This allows the debugger to look up the index of the module that it
should look up in the modules stream for symbol information. With this
change, windbg can now find line tables, but it still cannot print local
variables.
Fixes PR34048
Reviewers: zturner
Subscribers: hiraditya, ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D36285
llvm-svn: 309987
In order to get dbghelp to load our pdb, we have to fill in the
PointerToRawData field as well as the AddressOfRawData field. One is the
file offset and the other is the RVA.
llvm-svn: 309900
We don't write any actual symbols to this stream yet, but for
now we just create the stream and hook it up to the appropriate
places and give it a valid header.
Differential Revision: https://reviews.llvm.org/D35290
llvm-svn: 309608
Summary:
MSVC link.exe records all external symbol names in the publics stream.
It provides similar functionality to an ELF .symtab.
Reviewers: zturner, ruiu
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35871
llvm-svn: 309303
Also handle overflow correctly in LDR/STR relocations. Even if the
offset range of a 8 byte LDR instruction is 15 bit (even if the immediate
itself is 12 bit) due to a 3 bit shift, only include up to 12 bits of offset
after doing the relocation, by limiting the range of the immediate by the
number of shifted bits.
Differential Revision: https://reviews.llvm.org/D35792
llvm-svn: 309175
Also emit an error if /manifestinput: is used without /manifest:embed.
Increases compatibility with link.exe
https://reviews.llvm.org/D35842
llvm-svn: 308998
The same adjustment is already done for the entry point in
Writer.cpp and for relocations that point to executable code
in Chunks.cpp.
Differential Revision: https://reviews.llvm.org/D35767
llvm-svn: 308953
Also extend the tests for IMAGE_REL_ARM64_PAGEOFFSET_12L to test
all 8/16/32/64 bit GPR and 8/16/32/64/128 SIMD/FP bit ldr/str variants,
and a ldr with an existing offset.
Differential revision: https://reviews.llvm.org/D35647
llvm-svn: 308631
Fix issues found in existing code, while reviewing other changes.
Change the data type of a variable to uint32_t, to avoid potential issues
with signedness in shifts.
Differential revision: https://reviews.llvm.org/D35646
llvm-svn: 308586
This fixes cases on ARM64 when importing from more than one DLL,
in case the imports from the first DLL ended up unaligned.
When fixing up a IMAGE_REL_ARM64_PAGEOFFSET_12L, which shifts the
offset by the load/store size, check that the shift doesn't discard
any bits. (This would also detect if the import address chunks were
unaligned.)
Differential revision: https://reviews.llvm.org/D35640
llvm-svn: 308585
Improve the link conformance for the import name embedded into the
import library. This requires the associated change to the LLVM portion
for the DEF file parser. The import file generation embeds a different
name based on whether the driver is invoked as "link" or "lib".
Furthermore, the LIBRARY keyword in the DEF file influences the import
name. The behaviour can be summarised according to the following table:
| LIBRARY w/ ext | LIBRARY w/o ext | no LIBRARY
-----+----------------+---------------------+------------------
LINK | {value} | {value}.{.dll/.exe} | {output name}
LIB | {value} | {value}.dll | {output name}.dll
llvm-svn: 308407
DWARF debug sections can also contain relocations against symbols in
discared segments. LLD should accept such relocations.
Differential Revision: https://reviews.llvm.org/D35526
llvm-svn: 308315
Assume that the LF_TYPESERVER2 record contains Windows-style paths. In
any case, 'sys::path::filename(Path, Style::windows)' will work on
Unix-style paths.
llvm-svn: 308241
Summary:
Object files compiled with /Zi emit type information into a type server
PDB. The .debug$S section will contain a single TypeServer2Record with
the absolute path and GUID of the type server. LLD needs to load the
type server PDB and merge all types and items it finds in it into the
destination PDB.
Depends on D35495
Reviewers: ruiu, inglorion
Subscribers: zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35504
llvm-svn: 308235
Summary:
We were treating the GUIDs in TypeServer2Record as strings, and the
non-ASCII bytes in the GUID would not round-trip through YAML.
We already had the PDB_UniqueId type portably represent a Windows GUID,
but we need to hoist that up to the DebugInfo/CodeView library so that
we can use it in the TypeServer2Record as well as in PDB parsing code.
Reviewers: inglorion, amccarth
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35495
llvm-svn: 308234
Summary:
Instead of wiring these through the CVTypeVisitor interface, clients
should inspect the CVTypeArray before visiting it and potentially load
up the type server's TPI stream if they need it.
No tests relied on this functionality because LLD was the only client.
Reviewers: ruiu
Subscribers: mgorny, hiraditya, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35394
llvm-svn: 308212
Summary:
We've accumulated about five or so data structures that are widely
referenced:
- PDBBuilder
- Type table
- Id table
- PDB string table
- Type server handler
I'm about to rewrite type server handling, and I need a new class in LLD
where I can put its state. By creating a new PDBLinker class, I hope to
put it there next.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35392
llvm-svn: 307979
Summary:
This would have caught the invalid object file I used in my test case in
r307726. The OOB was only caught by ASan later, which is slow and
doesn't work on some platforms. LLD should do some basic input
validation itself. This check isn't perfect, so relocations can reach
OOB by up to seven bytes, but it's better than what we had and probably
cheap.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35371
llvm-svn: 307948
Summary:
This fixes type indices for SDK or CRT static archives. Previously we'd
try to look next to the archive object file path, which would not exist
on the local machine.
Also error out if we can't resolve a type server record. Hypothetically
we can recover from this error by discarding debug info for this object,
but that is not yet implemented.
Reviewers: ruiu, amccarth
Subscribers: aprantl, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35369
llvm-svn: 307946
Revert "[PDB] Tweak bad type index error handling"
check-lld with asan detects use-after-poison.
This reverts commits r307733 and r307726.
llvm-svn: 307752
Translate invalid type indices to a sentinel value instead of skipping
the record. Skipping records isn't a good recovery method, because we
can skip a scope open or close record, which will confuse the scope
management code.
We currently have lots of invalid type indices on Microsoft-provided
standard libraries, because the LF_TYPESERVER2 records contain absolute
paths that are only valid on their build servers. Our type server
handlers need to look at other things (GUIDs) to find these type server
PDBs.
llvm-svn: 307726
This is enough to link a working hello world executable, with
a call to an imported function, a string constant passed to
the imported function, and loads from a global variable.
Differential Revision: https://reviews.llvm.org/D34964
llvm-svn: 307629
This is part of the continuing effort to increase parity between
LLD and MSVC PDBs. link still doesn't like our PDBs, so the most
obvious thing to check was whether adding an empty publics stream
would get it to do something else. It still fails in the same way
but at least this removes one more variable from the equation.
The next logical step would be to try creating an empty globals
stream.
Differential Revision: https://reviews.llvm.org/D35224
llvm-svn: 307598
lld-link is apparently a symlink to lld. Our pdb writing code
uses llvm::sys::fs::getMainExecutable() and writes that value
into the PDB, which will resolve symlinks etc. But what we
really want is the exact value of argv[0], which matches what
the MS linker does. Fix this by just writing argv[0] instead
of calling getMainExecutable.
llvm-svn: 307592
This reverts commit 147f45ff24456aea59575fa4ac16c8fa554df46a.
Revert "Revert "Revert "Revert "Replace trivial use of external rc.exe by writing our own .res file.""""
This reverts commit 61a90a67ed54a1f0dfeab457b65abffa129569e4.
The patches were intially reverted because they were causing a failure
on CrWinClangLLD. Unfortunately, this was done haphazardly and didn't
compile, so the revert was reverted again quickly to fix this. One that
was done, the revert of the revert was itself reverted. This allowed me
to finally fix the actual bug in r307452. This patch re-enables the
code path that had originally been causing the bug, now that it (should)
be fixed.
llvm-svn: 307460
1) Don't write a /src/headerblock stream. This appears to be
written conditionally by MSVC, but it's not clear what the
condition is. For now, just remove it since we dont' know
what it is anyway and the particular pdb we've checked in
for the test doesn't have one.
2) Write a valid timestamp for the PDB file signature. This
leads to non-reproducible builds, but it matches the default
behavior of link, so it should be out default as well. If
we need reproducibility, we should add a separate command
line option for it that is off by default.
3) Write an empty FPO stream. MSVC seems to always write an
FPO stream. This change makes the stream directory match
up, although we still need to make the contents of the FPO
stream match.
llvm-svn: 307436
Without this we would just append whatever the user
wrote on the command line, so if we're in C:\foo
and we run lld-link bar/baz.obj, we would write
C:\foo\bar/baz.obj in various places in the PDB.
MSVC linker does not do this, so we shouldn't either.
This fixes some differences in the diff test, so we
update the test as well.
Differential Revision: https://reviews.llvm.org/D35092
llvm-svn: 307423
A couple of things were different about our generated PDBs.
1) We were outputting the wrong Version on the PDB Stream.
The version we were setting was newer than what MSVC is setting.
It's not clear what the implications are, but we change LLD
to use PdbImplVC70, as MSVC does.
2) For the optional debug stream indices in the DBI Stream, we
were outputting 0 to mean "the stream is not present". MSVC
outputs uint16_t(-1), which is the "correct" way to specify
that a stream is not present. So we fix that as well.
3) We were setting the PDB Stream signature to 0. This is supposed
to be the result of calling time(nullptr). Although this leads
to non-deterministic builds, a better way to solve that is by
having a command line option explicitly for generating a
reproducible build, and have the default behavior of lld-link
match the default behavior of link.
To test this, I'm making use of the new and improved `pdb diff`
sub command. To make it suitable for writing tests against, I had
to modify the diff subcommand slightly to print less verbose output.
Previously it would always print | <column> | <value1> | <value2> |
which is quite verbose, and the values are fragile. All we really
want to know is "did we produce the same value as link?" So I added
command line options to print a single character representing the
result status (different, identical, equivalent), and another to
hide the value display. Note that just inspecting the diff output
used to write the test, you can see some things that are obviously
wrong. That is just reflective of the fact that this is the state
of affairs today, not that we're asserting that this is "correct".
We can use this as a starting point to discover differences, fix
them, and update the test.
Differential Revision: https://reviews.llvm.org/D35086
llvm-svn: 307422
Based strictly on the name, this seems to have something to do
width edit & continue. The goal of this patch has nothing to do
with supporting edit and continue though. msvc link.exe writes
very basic information into this area even when *not* compiling
with support for E&C, and so the goal here is to bring lld-link
to parity. Since we cannot know what assumptions standard tools
make about the content of PDB files, we need to be as close as
possible.
This ECNames data structure is a standard PDB string hash table.
link.exe puts a single string into this hash table, which is the
full path to the PDB file on disk. It then references this string
from the module descriptor for the compiler generated `* Linker *`
module.
With this patch, lld-link will generate the exact same sequence of
bytes as MSVC link for this subsection for a given object file
input (as reported by `llvm-pdbutil bytes -ec`).
llvm-svn: 307356
Summary:
There are a variety of records that open scopes: function scopes, block
scopes, and inlined call site scopes. These symbol records contain
Parent and End fields with the offsets of other symbol records. The End
field contains the offset of the matching S_END or S_INLINESITE_END
record. The Parent field contains the offset of the parent record, or 0
if this is a top-level scope (i.e. a function).
With this change, `llvm-pdbutil pretty -all` no longer crashes on PDBs
produced by LLD. I haven't tried a real debugger yet.
Reviewers: zturner, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34898
llvm-svn: 307278
This reverts commit ae21ee0b6cacbc1efaf4d42502e71da2f0eb45c3.
The initial revert was done in order to prevent ongoing errors on
chromium bots such as CrWinClangLLD. However, this was done haphazardly
and I didn't realize there were test and compilation failures, so this
revert was reverted. Now that those have been fixed, we can revert the
revert of the revert.
llvm-svn: 307227
This reverts commit 5fecbbbe5049665d86834cf69d8f75db4f392308.
The initial revert was done in order to prevent ongoing errors on
chromium bots such as CrWinClangLLD. However, this was done haphazardly
and I didn't realize there were test and compilation failures, so this
revert was reverted. Now that those have been fixed, we can revert the
revert of the revert.
llvm-svn: 307226
This reverts commit 600d52c278e123dd08bee24c1f00932b55add8de.
This patch still seems to break CrWinClangLLD, reverting until I can
find root problem.
llvm-svn: 307189
This patch still seems to break CrWinClangLLD, reverting this once more
until I can discover root problem.
This reverts commit 3dbbc8ce43be50ffde2b1c655c6d3a25796fe78b.
llvm-svn: 307188
A plain empty entry point function that returns 0 seems to produce
a binary that loads and runs fine in wine.
Differential Revision: https://reviews.llvm.org/D34833
llvm-svn: 306963
Summary:
This reverts commit 51931072a7c9a52540baf76fc30ef391d2529a2f.
This revert was originally done because the integrations of the new
WindowsResource library into LLD was causing error in chromium, due to
bugs in how resource sections were handled. These bugs were fixed,
meaning that the features may be reintegrated.
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D34922
llvm-svn: 306941
This reverts commit d4c7e9fc63c10dbab0c30186ef8575474a704496.
This is done in order to address the failure of CrWinClangLLD etc. bots.
These throw an error of "side-by-side configuration is incorrect" during
compilation, which sounds suspiciously related to these manifest
changes.
Revert "Switch external cvtres.exe for llvm's own resource library."
This reverts commit 71fe8ef283a9dab9a3f21432c98466cbc23990d1.
llvm-svn: 306618
Summary:
In order to do this without switching on the symbol kind multiple times,
I created Defined::getChunkAndOffset and use that instead of
SymbolBody::getRVA in the inner relocation loop.
Now we get the symbol's chunk before switching over relocation types, so
we can test if it has been discarded outside the inner relocation type
switch. This also simplifies application of section relative
relocations. Previously we would switch on symbol kind to compute the
RVA, then the relocation type, and then the symbol kind again to get the
output section so we could subtract that from the symbol RVA. Now we
*always* have an OutputSection, so applying SECREL and SECTION
relocations isn't as much of a special case.
I'm still not quite happy with the cleanliness of this code. I'm not
sure what offsets and bases we should be using during the relocation
processing loop: VA, RVA, or OutputSectionOffset.
Reviewers: ruiu, pcc
Reviewed By: ruiu
Subscribers: majnemer, inglorion, llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D34650
llvm-svn: 306566
This patch removes the dependency on the external rc.exe tool by writing
a simple .res file using our own library. In this patch I also added an
explicit definition for the .res file magic. Furthermore, I added a
unittest for embeded manifests and fixed a bug exposed by the test.
llvm-svn: 306311
Summary:
They do the obvious thing: provide the section index of .bss and the
offset of the symbol in .bss.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34628
llvm-svn: 306304
Summary:
The main change is that we can have SECREL and SECTION relocations
against ___safe_se_handler_table, which is important for handling the
debug info in the MSVCRT.
Previously we were using DefinedRelative for __safe_se_handler_table and
__ImageBase, and after we implement CFGuard, we plan to extend it to
handle __guard_fids_table, __guard_longjmp_table, and more. However,
DefinedRelative is really only suitable for implementing __ImageBase,
because it lacks a Chunk, which you need in order to figure out the
output section index and output section offset when resolving SECREl and
SECTION relocations.
This change renames DefinedRelative to DefinedSynthetic and gives it a
Chunk. One wart is that __ImageBase doesn't have a chunk. It points to
the PE header, effectively. We could split DefinedRelative and
DefinedSynthetic if we think that's cleaner and creates fewer special
cases.
I also added safeseh.s, which checks that we don't emit a safe seh table
entries pointing to garbage collected handlers and that we don't emit a
table at all when there are no handlers.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: inglorion, pcc, llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D34577
llvm-svn: 306293
Summary:
For SECTION relocations against absolute symbols, MSVC emits the largest
output section index plus one. I've implemented that by threading a
global variable through DefinedAbsolute that is filled in by the Writer.
A more library-oriented approach would be to thread the Writer through
Chunk::writeTo and SectionChunk::applyRel*, but Rui seems to prefer
doing it this way.
MSVC rejects SECREL relocations against absolute symbols, but only when
the relocation is in a real output section. When the relocation is in a
CodeView debug info section destined for the PDB, it seems that this
relocation error is suppressed, and absolute symbols become zeros in the
object file. This is easily implemented by checking the input section
from which we're applying relocations.
This should fix errors about __safe_se_handler_table and
__guard_fids_table when linking the CRT and generating a PDB.
Reviewers: ruiu
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D34541
llvm-svn: 306071
Summary:
The main complexity in adding symbol records is that we need to
"relocate" all the type indices. Type indices do not have anything like
relocations, an opaque data structure describing where to find existing
type indices for fixups. The linker just has to "know" where the type
references are in the symbol records. I added an overload of
`discoverTypeIndices` that works on symbol records, and it seems to be
able to link the standard library.
Reviewers: zturner, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34432
llvm-svn: 305933
This works around a strange interaction with Authenticode signatures,
in which a signed PE executable with {Major,Minor}LinkerVersion = 0.0
fails to validate on Windows 7 (but is OK on Windows 10). Setting the
linker version to 14.0 (which is what VS2015 outputs) makes it work
again.
Patch by Simon Tatham <simon.tatham@arm.com>.
llvm-svn: 305929
VC2017 contains these new symbols as undefined symobls. They are used
for /guard:cf. Since we do not support the control flow guard, but we
want to at least ignore these symbols so that we can link against VS2017
libraries.
Fixes https://bugs.chromium.org/p/chromium/issues/detail?id=727193.
llvm-svn: 305876
The option numbers in the macro were off by one which
leads to some confusion. There are actually 12 arguments
to this macro.
Differential Revision: https://reviews.llvm.org/D34413
llvm-svn: 305823
Summary:
Previously we didn't add debug info chunks to the SparseChunks array, so
they didn't participate in section GC. Now we do.
Reviewers: ruiu
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D34356
llvm-svn: 305811
This is patch for GSoC project, bash-completion for clang.
To use this on bash, please run `source clang/utils/bash-autocomplete.sh`.
bash-autocomplete.sh is code for bash-completion.
In this patch, Options.td was mainly changed in order to add value class
in Options.inc.
llvm-svn: 305805
Summary:
This is a first step towards getting line info to show up in VS and
windbg. So far, only llvm-pdbutil can parse the PDBs that we produce.
cvdump doesn't like something about our file checksum tables. I'll have
to dig into that next.
This patch adds a new DebugSubsectionRecordBuilder which takes bytes
directly from some other producer, such as a linker, and sticks it into
the PDB. Line tables only need to be relocated. No data needs to be
rewritten.
File checksums and string tables, on the other hand, need to be re-done.
Reviewers: zturner, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34257
llvm-svn: 305713
In this patch, I flip the switch in DriverUtils from using the external
cvtres.exe tool to using the Windows Resource library in llvm.
I also fixed a bug where .rsrc sections were marked as discardable
memory and therefore were placed in the wrong order in the final PE.
Furthermore, I modified WindowsResource to write the coff directly to a
memory buffer instead of to file, also had it use the machine types
already declared in COFF.h instead creating my own enum.
Finally, I flipped the switch to allow all unit tests that had
previously run only on windows due to a winres dependency to run
cross-platform.
Reviewers: zturner, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34265
llvm-svn: 305592
Summary:
Adds a "Discarded" bool to SectionChunk to indicate if the section was
discarded by COMDAT deduplication. The Writer still just checks
`isLive()`.
Fixes PR33446
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34288
llvm-svn: 305582
When link is invoked with `/def:` and no input files, it behaves as if
`lib.exe` was invoked. Emulate this behaviour, generating the import
library from the def file that was passed. Because there is no input to
actually generate the dll, we simply process the def file early and exit
once we have created the import library.
llvm-svn: 305502
Summary:
Expose the module descriptor index and fill it in for section
contributions.
Reviewers: zturner
Subscribers: llvm-commits, ruiu, hiraditya
Differential Revision: https://reviews.llvm.org/D34126
llvm-svn: 305296
Without this, when building with shared BUILD_SHARED_LIBS=ON
I get errors such as:
lib/Core/Reader.cpp:40: error: undefined reference to
'llvm::identify_magic(llvm::StringRef)'
Differential Revision: https://reviews.llvm.org/D34004
llvm-svn: 304932
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
This reverts commit r304561 and re-lands r303490 & co.
The fix was to use "SymbolName" when translating LLD's internal export
list to lib/Object's short export struct. The SymbolName reflects the
actual symbol name, which may include fastcall and stdcall mangling bits
not included in the /EXPORT or .def file EXPORTS name:
@@ -434,8 +434,7 @@ std::vector<COFFShortExport> createCOFFShortExportFromConfig() {
std::vector<COFFShortExport> Exports;
for (Export &E1 : Config->Exports) {
COFFShortExport E2;
- E2.Name = E1.Name;
+ // Use SymbolName, which will have any stdcall or fastcall qualifiers.
+ E2.Name = E1.SymbolName;
E2.ExtName = E1.ExtName;
E2.Ordinal = E1.Ordinal;
E2.Noname = E1.Noname;
llvm-svn: 304573
This reverts commits r303490, r303491, r303493, and r303494.
This caused http://crbug.com/728726. Essentially, exporting stdcall
functions doesn't appear to work after this change. Reduced test case
soon.
llvm-svn: 304561
Object files have symbol records not aligned to any particular
boundary (e.g. 1-byte aligned), while PDB files have symbol
records padded to 4-byte aligned boundaries. Since they share
the same reading / writing code, we have to provide an option to
specify the alignment and propagate it up to the producer or
consumer who knows what the alignment is supposed to be for the
given container type.
Added a test for this by modifying the existing PDB -> YAML -> PDB
round-tripping code to round trip symbol records as well as types.
Differential Revision: https://reviews.llvm.org/D33785
llvm-svn: 304484
Originally this was intended to be set up so that when linking
a PDB which refers to a type server, it would only visit the
PDB once, and on subsequent visitations it would just skip it
since all the records had already been added.
Due to some C++ scoping issues, this was not occurring and it
was revisiting the type server every time, which caused every
record to end up being thrown away on all subsequent visitations.
This doesn't affect the performance of linking clang-cl generated
object files because we don't use type servers, but when linking
object files and libraries generated with /Zi via MSVC, this means
only 1 object file has to be linked instead of N object files, so
the speedup is quite large.
llvm-svn: 303920
If you pass /delayload:<dllname> to the COFF linker, it creates thunks
so that DLLs are loaded when they are used for the first time instead of
load-time.
This mechanism do not work for data symbols as there's no way to trap
acccesses to data imported from DLLs. (Technically, I think if we do not
initially map dllimport tables in memory, we could actually trap accesses
and delay-load data symbols, but that's not what Windows do.)
This patch is to report an error when you try to delay-load data symbols.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33106
Differential Revision: https://reviews.llvm.org/D33557
llvm-svn: 303890
This is a different implementation than r303225 (which was reverted
in r303270, re-submitted in r303304 and then re-reverted in r303527).
In the previous patch, I tried to add Live bit to each dllimported
symbol. It turned out that it didn't work with "oldnames.lib" which
contains a lot of weak aliases to dllimported symbols.
The way we handle weak aliases is to check if undefined symbols
can be resolved using weak aliases, and if so, memcpy the Defined
symbols to weak Undefined symbols, so that any references to weak
aliases automatically see defined symbols instead of undefined ones.
This memcpy happens before MarkLive kicks in.
That means we may have multiple copies of dllimported symbols. So
turning on one instance's Live bit is not enough.
This patch moves the Live bit to dllimport file. Since multiple
copies of dllsymbols still point to the same file, we can use it as the
central repository to keep track of liveness.
Differential Revision: https://reviews.llvm.org/D33520
llvm-svn: 303814
This is the only place we use threads for ICF. The intention of this code
was to split an input vector into 256 shards and process them in parallel.
What the code was actually doing was to split an input into 257 shards,
process the first 256 shards in parallel, and the remaining one in serial.
That means this code takes ceil(256/n)+1 instead of ceil(256/n) where n
is the number of available CPU cores. The former converges to 2 while
the latter converges to 1.
This patches fixes the above issue.
llvm-svn: 303797
LazyRandomTypeCollection is designed for random access, and in
order to provide this it lazily indexes ranges of types. In the
case of types from an object file, there is no partial index
to build off of, so it has to index the full stream up front.
However, merging types only requires sequential access, and when
that is needed, this extra work is simply wasted. Changing the
algorithm to work on sequential arrays of types rather than
random access type collections eliminates this up front scan.
llvm-svn: 303707
Previous algotirhm assumed that types and ids are in a single
unified stream. For inputs that come from object files, this
is the case. But if the input is already a PDB, or is the result
of a previous merge, then the types and ids will already have
been split up, in which case we need an algorithm that can
accept operate on independent streams of types and ids that
refer across stream boundaries to each other.
Differential Revision: https://reviews.llvm.org/D33417
llvm-svn: 303577
This reverts commit r303304 because it looks like the change
introduced a crash bug. At least after that change, LLD with thinlto
crashes when linking Chromium.
llvm-svn: 303527
This is split up into two commits.
This commit removes the DEF parser from LLD
See the previous commit for the creation in LLVM.
Reviewers: ruiu
Differential Revision: https://reviews.llvm.org/D32689
llvm-svn: 303491
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
llvm-svn: 303446
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
llvm-svn: 303409
Right now we have multiple notions of things that represent collections of
types. Most commonly used are TypeDatabase, which is supposed to keep
mappings from TypeIndex to type name when reading a type stream, which
happens when reading PDBs. And also TypeTableBuilder, which is used to
build up a collection of types dynamically which we will later serialize
(i.e. when writing PDBs).
But often you just want to do some operation on a collection of types, and
you may want to do the same operation on any kind of collection. For
example, you might want to merge two TypeTableBuilders or you might want
to merge two type streams that you loaded from various files.
This dichotomy between reading and writing is responsible for a lot of the
existing code duplication and overlapping responsibilities in the existing
CodeView library classes. For example, after building up a
TypeTableBuilder with a bunch of type records, if we want to dump it we
have to re-invent a bunch of extra glue because our dumper takes a
TypeDatabase or a CVTypeArray, which are both incompatible with
TypeTableBuilder.
This patch introduces an abstract base class called TypeCollection which
is shared between the various type collection like things. Wherever we
previously stored a TypeDatabase& in some common class, we now store a
TypeCollection&.
The advantage of this is that all the details of how the collection are
implemented, such as lazy deserialization of partial type streams, is
completely transparent and you can just treat any collection of types the
same regardless of where it came from.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303388
Our output is not compatible with the Binding feature, so make it
explicit that.
Differential Revision: https://reviews.llvm.org/D33336
llvm-svn: 303378
Previously, LLD-produced executables had IAT (Import Address Table) and
ILT (Import Lookup Table) as separate chunks of data, although their
contents are identical. My interpretation of the COFF spec when I wrote
the COFF linker is that they need to be separate tables even though they
are the same.
But Peter found that the Windows loader is fine with executables in
which IAT and ILT are merged. This is a patch to merge IAT and ILT.
I confirmed that an lld-link self-hosted with this patch works fine.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33064
Differential Revision: https://reviews.llvm.org/D33326
llvm-svn: 303374
The import lists are already binned by DLL name, so there's no need to
deduplicate here.
Differential Revision: https://reviews.llvm.org/D33330
llvm-svn: 303371
We've been using make<> to allocate new objects in ELF. We have
the same function in COFF, but we didn't use it widely due to
negligence. This patch uses the function in COFF to close the gap
between ELF and COFF.
llvm-svn: 303357
When /DEBUG is not specified, /PDB should be ignored. When
/DEBUG is specified, a PDB should be output regardless of
whether or not /PDB is specified. /PDB just overrides the
default name.
This patch implements this behavior, and adds some tests, while
also removing a dead option /DEBUGPDB which was unused in any
code.
Differential Revision: https://reviews.llvm.org/D33302
llvm-svn: 303352
This reverts re-submits r303225 which was reverted in r303270 because it
broke the sanitizer-windows bot.
The reason of the failure is that we were writing dead symbols to the
symbol table. I fixed the issue.
llvm-svn: 303304
and follow-up r303226 "Fix Windows buildbots."
This broke the sanitizer-windows buildbot.
> Previously, the garbage collector (enabled by default or by explicitly
> passing /opt:ref) did not kill dllimported symbols. As a result,
> dllimported symbols could be added to resulting executables' dllimport
> list even if no one was actually using them.
>
> This patch implements dllexported symbol garbage collection. Just like
> COMDAT sections, dllimported symbols now have Live bits to manage their
> liveness, and MarkLive marks reachable dllimported symbols.
>
> Fixes https://bugs.llvm.org/show_bug.cgi?id=32950
>
> Reviewers: pcc
>
> Subscribers: llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D33264
llvm-svn: 303270
Summary:
Previously, the garbage collector (enabled by default or by explicitly
passing /opt:ref) did not kill dllimported symbols. As a result,
dllimported symbols could be added to resulting executables' dllimport
list even if no one was actually using them.
This patch implements dllexported symbol garbage collection. Just like
COMDAT sections, dllimported symbols now have Live bits to manage their
liveness, and MarkLive marks reachable dllimported symbols.
Fixes https://bugs.llvm.org/show_bug.cgi?id=32950
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33264
llvm-svn: 303225
This reorganisation prevents us from cluttering up the top-level lib directory
with more driver libraries such as llvm-dlltool (see D29892).
llvm-svn: 302995
With the forthcoming codeview::StringTable which a pdb::StringTable
would hold an instance of as one member, this ambiguity becomes
confusing. Rename to PDBStringTable to avoid this.
llvm-svn: 301948
This change was motivated by output from lld-link.exe and link.exe
getting intermixed. There's already a flush() call in message(), so
there's precedence.
llvm-svn: 301693
CONSTANT imports expect both the `_imp_` prefixed and non-prefixed
symbols should be added to the symbol table. This allows for linking
symbols like _NSConcreteGlobalBlock in WinObjC. The previous change
would generate the import library properly by handling the option but
would not consume the generated entry properly.
llvm-svn: 301657
This seems to be the behavior of the MSVC linker. Previously, this
incompatibility caused nasty issues in chromium build a few times.
Differential Revision: https://reviews.llvm.org/D30363
llvm-svn: 301598
I thought I fixed the page size, but there were still errors.
This patch also contains fixes for grammatical errors.
Thanks pcc for proofreading!
llvm-svn: 301454
Summary: When using /msvclto, lld and MSVC's linker both do their own symbol resolution. This can cause them to select different archive members, which can result in undefined references. This change avoids that situation by extracting archive members that are selected by lld and passing those to link.exe before any archives, so that MSVC's uses those objects for symbol resolution instead of different archive members.
Reviewers: pcc, rnk, ruiu
Reviewed By: pcc
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D32317
llvm-svn: 301045
The CONSTANT export type is marked as obsolete, but link still supports
this. Furthermore, WinObjC uses this for certain exports. Add support
for this export type.
llvm-svn: 301013
Summary:
Fixes PR32689: /msvclto creates response files with lines
that are too long for msvc's linker (LNK1170).
Reviewers: hans, rnk, ruiu
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D32185
llvm-svn: 300612
Start using it in LLD to avoid needing to read bitcode again just to get the
target triple, and in llvm-lto2 to avoid printing symbol table information
that is inappropriate for the target.
Differential Revision: https://reviews.llvm.org/D32038
llvm-svn: 300300
Summary:
lld-link allows the number of parallel ThinLTO jobs to be specified
using /opt:lldltojobs=N. If left unspecified, the implementation
conservatively defaults to 1. This leads to very long link times. This
change makes it so that the default is to automatically set the
parallelism, as we do in the ELF linker.
Reviewers: ruiu, hans
Reviewed By: ruiu, hans
Subscribers: pcc, mehdi_amini, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31986
llvm-svn: 300089
The /appcontainer flag indicates that the module may only be used inside
an application container (for isolation). This has been supported by
link.exe since Windows 8.0. It sets an additional bit in the PE DLL
Characteristics flag to indicate the behavioural change.
llvm-svn: 299728
Summary:
This adds support for reporting multiple errors in a single invocation of lld-link. The limit defaults to 20 and can be changed with the /ERRORLIMIT command line parameter, or set to unlimited by passing a value of 0.
This is a new attempt after r295507, which was reverted because opening files raced with exiting early, causing the test to be flaky. This version avoids the race by exiting before calling enqueuePath.
Reviewers: pcc, ruiu
Reviewed By: ruiu
Subscribers: llvm-commits, dblaikie
Differential Revision: https://reviews.llvm.org/D31688
llvm-svn: 299496
Summary:
The TypeTableBuilder provides stable storage for type records. We don't
need to copy all of the bytes into a flat vector before adding it to the
TpiStreamBuilder.
This makes addTypeRecord take an ArrayRef<uint8_t> and a hash code to go
with it, which seems like a simplification.
Reviewers: ruiu, zturner, inglorion
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31634
llvm-svn: 299406
Introduce symbol table data structures that can be potentially written to
disk, have the LTO library build those data structures using temporarily
constructed modules and redirect the LTO library implementation to go through
those data structures. This allows us to remove the LLVMContext and Modules
owned by InputFile.
With this change I measured a peak memory consumption decrease from 5.4GB to
2.8GB in a no-op incremental ThinLTO link of Chromium on Linux. The impact on
memory consumption is larger in COFF linkers where we are currently forced
to materialize all metadata in order to read linker options. Peak memory
consumption linking a large piece of Chromium for Windows with full LTO and
debug info decreases from >64GB (OOM) to 15GB.
Part of PR27551.
Differential Revision: https://reviews.llvm.org/D31364
llvm-svn: 299168
Summary: In the ELF linker, we create the buffer identifier for bitcode files by appending the object name to the archive name. This change makes the COFF linker do the same. Without the change, ThinLTO builds can fail with an error message about multiple ThinLTO modules per object file, caused by object files contained in different archives having the same name.
Reviewers: pcc, ruiu
Reviewed By: pcc
Subscribers: mehdi_amini
Differential Revision: https://reviews.llvm.org/D31402
llvm-svn: 298942
Summary: MSVC does this when producing a PDB.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31316
llvm-svn: 298717
This will be used in the sanitizer test suite, which wants to use DWARF
line tables.
At some point we should reconsider how LLD handles the long section
names required by DWARF debug sections.
llvm-svn: 298544
Summary:
This also delays setting the output filename based on the first input
argument until after processing /def.
Fixes PR32354
Reviewers: ruiu, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31152
llvm-svn: 298327
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
The Archive object owns the memory buffers of any thin archive members, so we
need to make sure the object is still in scope when we access archive members.
Differential Revision: https://reviews.llvm.org/D31066
llvm-svn: 298033
The MSVC linker doesn't like archive files containing non-native object
files.
When we are doing an LTO build, we may create archive files containing
both LLVM bitcode files and native object files. For example, if a
project contains assembly files and C++ files, we create native object
files for the assembly files and LLVM bitcode files for the C++ files.
With the /msvclto option, LLD passes archive files to the MSVC linker.
Previously, we didn't pass archive files if they contain at least one
bitcode files. That wasn't correct because the native object files that
weren't passed to the MSVC linker may be needed to complete linking.
In this patch, we create new temporary archive files to strip bitcode
files.
Differential Revision: https://reviews.llvm.org/D31053
llvm-svn: 297997
Previously we did not have support for writing detailed
module information for each module, as well as the symbol
records. This patch adds support for this, and in doing
so enables the ability to construct minimal PDBs from
just a few lines of YAML. A test is added to illustrate
this functionality.
llvm-svn: 297900
Previously, if you have foo=bar in a definition file, this assertion
could fire because when symbols are read from file they could be mangled.
It seems that due to historical reasons underscore mangling scheme is
really ad-hoc, and I cannot find a clean way to handle this. I had
to just de-mangle symbols to search again.
llvm-svn: 297357
Some archive files created during chromium build contains both BC
and native files. If that's the case, we want to pass the archive
file to link.exe. Otherwise, the MSVC linker would complain that
there's an unresolved symbol in a given set of files.
I cannot explain why link.exe doesn't complain about the presence
of bitcode files in this case, but it seems link.exe doesn't touch BC.
llvm-svn: 297229
If /msvclto is specified, we compile bitcode files and pass it to the
MSVC linker, stripping all bitcode files. We haven't stripped archive
files, because I was thinking that the MSVC linker wouldn't touch files
in archive files. When we pass an object file to link.exe, all symbols
have been resolved already, so link.exe shoulnd't need any of the files
in archives.
It turns out that even though link.exe doesn't need to do that, it
seems to try to read each file in all archives. And if there's a non-
COFF file in an archive, it exists with an error message. So we need
to remove archives from the command line too.
llvm-svn: 297191
Prior to MSVC 2015 we had to manually include this header any
time we were going to include <thread> or <future> due to a
bug in MSVC's STL implementation. This has been fixed in MSVC
for some time now, and we require VS 2015 minimum, so we can
remove this across all subprojects.
llvm-svn: 296906
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Before the endianness was specified on each call to read
or write of the StreamReader / StreamWriter, but in practice
it's extremely rare for streams to have data encoded in
multiple different endiannesses, so we should optimize for the
99% use case.
This makes the code cleaner and more general, but otherwise
has NFC.
llvm-svn: 296415
This was reverted because it was breaking some builds, and
because of incorrect error code usage. Since the CL was
large and contained many different things, I'm resubmitting
it in pieces.
This portion is NFC, and consists of:
1) Renaming classes to follow a consistent naming convention.
2) Fixing the const-ness of the interface methods.
3) Adding detailed doxygen comments.
4) Fixing a few instances of passing `const BinaryStream& X`. These
are now passed as `BinaryStreamRef X`.
llvm-svn: 296394
r296215, "[PDB] General improvements to Stream library."
r296217, "Disable BinaryStreamTest.StreamReaderObject temporarily."
r296220, "Re-enable BinaryStreamTest.StreamReaderObject."
r296244, "[PDB] Disable some tests that are breaking bots."
r296249, "Add static_cast to silence -Wc++11-narrowing."
std::errc::no_buffer_space should be used for OS-oriented errors for socket transmission.
(Seek discussions around llvm/xray.)
I could substitute s/no_buffer_space/others/g, but I revert whole them ATM.
Could we define and use LLVM errors there?
llvm-svn: 296258
This adds various new functionality and cleanup surrounding the
use of the Stream library. Major changes include:
* Renaming of all classes for more consistency / meaningfulness
* Addition of some new methods for reading multiple values at once.
* Full suite of unit tests for reader / writer functionality.
* Full set of doxygen comments for all classes.
* Streams now store their own endianness.
* Fixed some bugs in a few of the classes that were discovered
by the unit tests.
llvm-svn: 296215
This is part of a larger effort to get the Stream code moved
up to Support. I don't want to do it in one large patch, in
part because the changes are so big that it will treat everything
as file deletions and add, losing history in the process.
Aside from that though, it's just a good idea in general to
make small changes.
So this change only changes the names of the Stream related
source files, and applies necessary source fix ups.
llvm-svn: 296211
I added this log message to test the /msvclto option, but
this output might confuse FileCheck. This patch attempts to fix
it by removing it.
llvm-svn: 295793
LLD is a multi-threaded program. errs() or outs() are not guaranteed
to be thread-safe (they are actually not).
LLD's message(), log() or error() are thread-safe. We should use them.
llvm-svn: 295787
Behavior races on ErrorCount. If the enqueued paths are evaluated
eagerly (in enqueuePath) then the behavior is as the test expects. But
they may not be evaluated until the future is waited on, in run() -
which is after the early return/exit on ErrorCount. (this causes the
test to fail (because in the "/ERRORCOUNT:XYZ" test, no other errors
are printed), at least for me, on linux)
This reverts commit r295507.
llvm-svn: 295590
Summary: This adds support for reporting multiple errors in a single invocation of lld-link. The limit defaults to 20 and can be changed with the /ERRORLIMIT command line parameter, or set to unlimited by passing a value of 0.
Reviewers: pcc, ruiu
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D29691
llvm-svn: 295507
Some PDBs or object files can contain references to other PDBs
where the real type information lives. When this happens,
all type indices in the original PDB are meaningless because
their records are not there.
With this patch we add the ability to pull type info from those
secondary PDBs.
Differential Revision: https://reviews.llvm.org/D29973
llvm-svn: 295382
LLVM defines `PTHREAD_LIB` which is used by AddLLVM.cmake and various projects
to correctly link the threading library when needed. Unfortunately
`PTHREAD_LIB` is defined by LLVM's `config-ix.cmake` file which isn't installed
and therefore can't be used when configuring out-of-tree builds. This causes
such builds to fail since `pthread` isn't being correctly linked.
This patch attempts to fix that problem by renaming and exporting
`LLVM_PTHREAD_LIB` as part of`LLVMConfig.cmake`. I renamed `PTHREAD_LIB`
because It seemed likely to cause collisions with downstream users of
`LLVMConfig.cmake`.
llvm-svn: 294690
Summary: This adds an option to save temporary files generated during link-time optimization. This can be useful for debugging.
Reviewers: ruiu, pcc
Reviewed By: ruiu, pcc
Subscribers: mehdi_amini
Differential Revision: https://reviews.llvm.org/D29518
llvm-svn: 294498
If `/debugtypes` is used to omit the codeview information, we would not
have constructed the debug info codeview record which is used to tie the
PDB to the binary. In such a case, rub out the GUID and Age fields.
llvm-svn: 294279
This patch defines a new command line option, /MSVCLTO, to LLD.
If that option is given, LLD invokes link.exe to link LTO-generated
object files. This is hacky but useful because link.exe can create
PDB files.
Differential Revision: https://reviews.llvm.org/D29526
llvm-svn: 294234
Summary: The COFF linker previously implemented link-time optimization using an API which has now been marked as legacy. This change refactors the COFF linker to use the new LTO API, which is also used by the ELF linker.
Reviewers: pcc, ruiu
Reviewed By: pcc
Subscribers: mgorny, mehdi_amini
Differential Revision: https://reviews.llvm.org/D29059
llvm-svn: 293967
Previously, mergeTypeStreams returns only true or false, so it was
impossible to know the reason if it failed. This patch changes the
function signature so that it returns an Error object.
Differential Revision: https://reviews.llvm.org/D29362
llvm-svn: 293820
Previously, we were printing out something like this for
sections/symbols with alignment 16
0000000000201000 0000000000000182 10 .data
which I think confusing. I think printing it in decimal is better.
Differential Revision: https://reviews.llvm.org/D29258
llvm-svn: 293685
Summary: This copies over some functionality we have in ELF/Error.{cpp,h} and makes it available in COFF/Error.{cpp,h}
Reviewers: pcc, rafael, ruiu
Subscribers:
Differential Revision: https://reviews.llvm.org/D28692
llvm-svn: 292240
Previous code had a bug that if the program exits with an assert() or
fail() before the control reaches end of writeMapFile(), it leaves a
temporary file, because FileRemover's dtor isn't called in that case.
I could fix that by removeFileOnSignal() and other functions, but
I think we can simply write to the result file directly. I think
that is straightforward and easy to understand.
Additionally, that allows something like `-Map /dev/null` or a bash
hack such as `-Map >(grep symbol-im-looking-for)`. Previously,
that kind of things didn't work.
Differential Revision: https://reviews.llvm.org/D28714
llvm-svn: 292041
Summary: When we encouter a relocation type we don't know how to handle, this change causes us to print out the hexadecimal value of the relocation type. This makes troubleshooting a little easier.
Reviewers: ruiu, zturner
Differential Revision: https://reviews.llvm.org/D28576
llvm-svn: 291962
This patch is to merge type info in multiple .debug$T sections.
One mystery that needs to be solved is that it is not clear how
the MSVC linker uses TPI and IPI streams. Both streams contain
type info, and it is not obvious what kind of record should go
which.
dumppdb command in microsoft-pdb repository prints out IPI stream
contents as "IDs" and TPI stream as "TYPES", but looks like the tool
don't really care about which stream type recrods were read from.
For now, in this patch, I emit all type records to TPI stream.
It might just work with other tools. If not, we need to investigate
it more.
llvm-svn: 291739
Previously the type dumper itself was passed around to a lot of different
places and manipulated in ways that were more appropriate on the type
database. For example, the entire TypeDumper was passed into the symbol
dumper, when all the symbol dumper wanted to do was lookup the name of a
TypeIndex so it could print it. That's what the TypeDatabase is for --
mapping type indices to names.
Another example is how if the user runs llvm-pdbdump with the option to
dump symbols but not types, we still have to visit all types so that we
can print minimal information about the type of a symbol, but just without
dumping full symbol records. The way we did this before is by hacking it
up so that we run everything through the type dumper with a null printer,
so that the output goes to /dev/null. But really, we don't need to dump
anything, all we want to do is build the type database. Since
TypeDatabaseVisitor now exists independently of TypeDumper, we can do
this. We just build a custom visitor callback pipeline that includes a
database visitor but not a dumper.
All the hackery around printers etc goes away. After this patch, we could
probably even delete the entire CVTypeDumper class since really all it is
at this point is a thin wrapper that hides the details of how to build a
useful visitation pipeline. It's not a priority though, so CVTypeDumper
remains for now.
After this patch we will be able to easily plug in a different style of
type dumper by only implementing the proper visitation methods to dump
one-line output and then sticking it on the pipeline.
Differential Revision: https://reviews.llvm.org/D28524
llvm-svn: 291724
We were starting to get some name clashes between llvm-pdbdump
and the common CodeView framework, so I took this opportunity
to rename a bunch of files to more accurately describe their
usage. This also helps in llvm-pdbdump to distinguish
between different files and whether they are used for pretty
dump mode or raw dump mode.
llvm-svn: 291627
This is how we use TarWriter in LLD. Now LLD does not append
a file extension, so you need to pass `--reproduce foo.tar`
instead of `--reproduce foo`.
Differential Revision: https://reviews.llvm.org/D28103
llvm-svn: 291210
The PDB GUID, Age, and version are tied together by the RSDS record in
the binary. Pass along the BuildId information into the createPDB to
allow us to tie the binary and the PDB together.
llvm-svn: 290975
Peter Collingbourne